Title of article :
Tribological and corrosive properties of silver thin films prepared by e-beam ion plating method
Author/Authors :
Lee، نويسنده , , Kyung-Hwang and Takai، نويسنده , , Osamu and Lee، نويسنده , , Myeong-Hoon، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2003
Abstract :
The silver thin films were prepared using e-beam ion plating method. The silver films were deposited on stainless substrate according to the various deposition conditions such as argon gas pressures and bias voltages. After preparing silver films, the structure of deposited film was analyzed by X-ray diffraction technique and the film morphology was observed by scanning electron microscopy. The tribological properties of silver films prepared as functions of deposition conditions were investigated by a ball-on-disc tribo-tester at vacuum ambient and corrosive characteristics were measured with potentiostat in 0.5 M Na2S solution, respectively.
Keywords :
Corrosion , Tribology , Ion plating , Solid lubricant , Silver film
Journal title :
Surface and Coatings Technology
Journal title :
Surface and Coatings Technology