Author/Authors :
فاضلی، مجتبی نويسنده Department of water and wastewater engineering, School of Water and Environmental Engineering, University of Shahid Beheshti, Tehran, Iran Fazeli, Mojtaba , کاظمی بلگه شیری، محمدجواد نويسنده Department of water and wastewater engineering, School of Water and Environmental Engineering, University of Shahid Beheshti, Tehran, Iran Kazemibalgehshiri, Mohammadjavad , علی قارداشی، ابوالقاسم نويسنده Department of water and wastewater engineering, School of Water and Environmental Engineering, University of Shahid Beheshti, Tehran, Iran Alighardashi, Abolghasem
Abstract :
Background & Aims of the Study: A high nitrate and arsenic concentration in water resources represent a potential risk to the environment and public health. The present work improved a chemo-physically modified activated carbon derived from walnut shells as an adsorbent to improve nitrate and arsenic removal ability from water.
Materials & Methods: To increase removal efficiency, activated carbon surface characteristics were improved by acidification. Chemical activation was achieved when the carbon was mixed with water and 5% (v/v) phosphoric acid. After adsorbent preparation, the contact time, pH and the initial concentration were studied as variables.
Results: The effective pH for adsorption onto activated carbon was 6.5. The results indicated that 70 s and 3 mins was the sufficient time to attain equilibrium for a maximum removal efficiency of 78.44% and 98% for nitrate and arsenic, respectively. The adsorption capacity of the adsorbent was 10.60 mg nitrate/g carbon and 120 μg arsenic/g carbon. Removal obeyed the Langmuir isotherm and pseudo-second-order kinetic model.
Conclusion: The results showed a noticeable improvement in activated walnut-shell carbon absorbance (improvement in crystalline structure, chemical bonds, and morphology of micropores) by chemo-physical activation. Chemo-physical activation increased the surface area of the adsorbent from 1067 to 1437 m2g‒1 and decreased the mean pore size from 3.28 to 2.08 nm. The characterization results showed the major reasons of adsorption could be structure, size and distributions of pores, high surface area and chemical bonds.
