Synchrotron X-ray microtomography (on a micron scale) provides three-dimensional imaging representation of bone ingrowth in calcium phosphate biomaterials

This study used synchrotron X-ray microtomography on a micron scale to compare three-dimensional (3D) bone ingrowth after implantation of various calcium phosphate bone substitutes in a rabbit model. The advantage of using this new method for the study of biomaterials was then compared with histomorphometry for analysis of interconnection and bone ingrowth. The study focused on the newly formed bone-biomaterial interface. Macroporous Biphasic Calcium Phosphate (MBCP™) ceramic blocks and two different injectable calcium phosphate biomaterials [an injectable bone substitute (IBS) consisting of a biphasic calcium phosphate granule suspension in hydrosoluble polymer and a calcium phosphate cement material (CPC)] were studied after in vivo implantation. Absorption or phase-contrast microtomography was performed with the dedicated set-up at beamline ID22. Experimental spatial resolution was between 1 and 1.4 μm, depending on experimental radiation. All calcium phosphates tested showed osteoconduction. IBS observations after 3D reconstruction showed interconnected bioactive biomaterial with total open macroporosity and complete bone ingrowth as early as 3 weeks after implantation. This experimentation was consistent with two-dimensional histomorphometric analysis, which confirmed its suitability for biomaterials. This 3D study relates the different types of bone substitution to biomaterial architecture. As porosity and interconnection increase, bone ingrowth becomes greater at the expense of the bone substitute: IBS>MBCP>CPC.