<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Analysis of self-pressurization phenomenon of cryogenic fluid storage tank with thermal diffusion model Original Research Article
2
Analysis of self-sustaining recuperative solid oxide electrolysis systems
3
Analysis of self-weight induced collapse of long-deep beams
4
Analysis of semi-adiabiatic tests for the prediction of early-age behavior of massive concrete structures
5
Analysis of semibatch emulsion polymerization: Role of ultrasound and initiator
6
Analysis of semibatch emulsion polymerization: Role of ultrasound and initiator
7
Analysis of Semi-Bogie Based Propulsion System used in Tehran Metro Trains in Degraded Mode of Operation
8
Analysis of Semi-Bogie Based Propulsion System Used in Tehran Metro's trains in Degraded Mode of Operation
9
Analysis of semicarbazide in baby food by liquid chromatography tandem mass spectrometry (LC–MS–MS)—In-house method validation
10
Analysis of semicoercive contact problems using symmetric BEM and augmented Lagrangians
11
Analysis of semiconductor thin films deposited using a hollow cathode plasma torch
12
Analysis of semidiscretization of the compressible Navier–Stokes equations
13
Analysis of semi-implicit DGFEM for nonlinear convection–diffusion problems on nonconforming meshes Original Research Article
14
Analysis of semi-staggered finite-difference method with application to Bingham flows
15
Analysis of semi-volatile materials (SVM) in fine particulate matter
16
Analysis of semi-volatile organic compounds in aqueous samples by microwave-assisted headspace solid-phase microextraction coupled with gas chromatography–electron capture detection
17
Analysis of semi-volatile organic compounds in indoor suspended particulate matter by thermal desorption coupled with gas chromatography/mass spectrometry
18
Analysis of Sensing Errors for Manufacturing Geometric Objects from Sensed Data
19
Analysis of sensitivity measures of finite-precision digital controller structures with closed-loop stability bounds
20
Analysis of sensitivity of cold stages on Philips CM12 to sources of vibration
21
Analysis of sensitivity of cold stages on Philips CM12 to sources of vibration
22
Analysis of sensitivity of LR 115 II in cylindrical diffusion chambers for radon concentration determination
23
Analysis of Sensitization Profile in Medium Chromium Ferritic Stainless Steel (FSS) Welds
24
Analysis of sensory assessors in texture profiling of potatoes by multivariate modelling
25
Analysis of sensory data of different food products by ANOVA
26
Analysis of Sentences for Deaf Children in Primary School
27
Analysis of separation and fouling behaviour during nanofiltration of dairy ultrafiltration permeates Original Research Article
28
Analysis of Separation Control Authority of DBD Plasma Actuator using Hot-Film Sensor Array
29
Analysis of separation of chromic acid by zeolite–clay composite membrane using space-charge model
30
Analysis of separation response of Kelsey centrifugal jig in processing fine coal
31
Analysis of sequence and pathogenic properties of two variants of encephalomyocarditis virus differing in a single amino acid in VP1
32
Analysis of sequence distribution in methyl methacrylate–methyl acrylate copolymers by 13C NMR spectroscopy
33
Analysis of Sequence, Map Position, and Gene Expression Reveals Conserved Essential Genes for Iron Uptake in Arabidopsis and Tomato
34
Analysis of sequences involved in IE2 transactivation of a baculovirus immediate–early gene promoter and identification of a new regulatory motif
35
Analysis of sequential charged particle reaction experiments for fusion reactors
36
Analysis of sequential failures for assessment of reliability and safety of manufacturing systems
37
Analysis of sequential failures for assessment of reliability and safety of manufacturing systems
38
Analysis of SERCA2 promoter activity by direct gene transfer into rat hearts
39
Analysis of serial–parallel systems in the framework of fuzzy/possibility approach. Part I. Appraisal: case of independent components
40
Analysis of serial–parallel systems in the framework of fuzzy/possibility approach. Part I. Appraisal: case of independent components
41
Analysis of Series Compensation and DC-Link Voltage Controls of a Transformerless Self-Charging Dynamic Voltage Restorer
42
Analysis of series resistance of crystalline silicon solar cell with two-layer front metallization based on light-induced plating
43
Analysis of serious occupational accidents in Swedish fishery
44
Analysis of serological responses to cryptosporidium antigen among NHANES III participants
45
Analysis of serpentinophytes from north–east of Portugal for trace metal accumulation––relevance to the management of mine environment
46
Analysis of Sertraline and Desmethylsertraline in Human Plasma and Red Blood Cells
47
Analysis of sertraline-only overdoses
48
Analysis of serum and seminal plasma after feeding ochratoxin A with breeding boars
49
Analysis of serum chemerin concentrations in psoriatic patients in relation to metabolic abnormalities
50
Analysis of Serum Cytokine Levels in Larynx Squamous Cell Carcinoma and Dysplasia Patients
51
Analysis of serum ErbB-2 protein and HLA-DRB1 in Japanese patients with lung cancer
52
Analysis of serum lipid levels in Japanese men and women according to body mass index. Increase in risk of atherosclerosis in postmenopausal women Original Research Article
53
Analysis of serum lipid profiles, metal ions and thyroid hormones levels abnormalities in β-thalassaemic children of Bangladesh
54
Analysis of serum microRNAs (miR-26a-2*, miR-191, miR-337-3p and miR-378) as potential biomarkers in renal cell carcinoma
55
Analysis of serum peptidome patterns of patients stung by honey bees
56
Analysis of Serum Prostate-Specific Antigen Levels in Men Aged 40 Years and Older in Yasuj, Iran
57
Analysis of Service Quality Gap between Perceptions and Expectations of Service Recipients using SERVQUAL Approach in Selected Hospitals in Golestan Province
58
Analysis of service stress corrosion cracking in a natural gas transmission pipeline, active or dormant?
59
Analysis of Service-Oriented Architecture and Scrum Software Development Approach for IIoT
60
Analysis of sesquiterpene emissions by plants using solid phase microextraction
61
Analysis of Settling Time for Low Power CMOS Multistage Operational Amplifiers.
62
Analysis of seven purines and pyrimidines in pork meat products by ultra high performance liquid chromatography–tandem mass spectrometry
63
Analysis of seven sulphonamides in milk by cloud point extraction and high performance liquid chromatography
64
ANALYSIS OF SEVERAL ANGIOTENSIN-CONVERTING ENZYME INHIBITORS USING POTENTIOMETRIC, ENANTIOSELECTIVE MEMBRANE ELECTRODES
65
Analysis of several discharge rate–spacing–duration combinations in drip irrigation system
66
Analysis of Several Indicators of Infection from Gyrodactylus spp. in one Year Rainbow Trout (Oncorhynchus Mykiss)
67
Analysis of several methods for the extraction of high quality DNA from acetic acid bacteria in wine and vinegar for characterization by PCR-based methods
68
Analysis of several methods for the response evaluation of HF field excited finite lines
69
Analysis of several phenolic compounds with potential antioxidant properties in grape extracts and wines by high-performance liquid chromatography–photodiode array detection without sample preparation
70
Analysis of several real matrices using new mono-, bi-enzymatic, or inhibition organic phase enzyme electrodes Original Research Article
71
Analysis of several serum enzymes and blood urea nitrogen of swainsonine–HSA immunized goats
72
Analysis of Severe Accident Management Strategy for a BWR-4 Nuclear Power Plant
73
Analysis of sewed preforms by visual on-line monitoring of stitch-hole variations under compaction
74
Analysis of SFL1 and SFL2 Promoter Region in Arabidipsis thaliana using Gateway Cloning System.
75
Analysis of SFL1 and SFL2 Promoter Region in Arabidipsis thaliana using Gateway Cloning System.
76
ANALYSIS OF SHADOWING PROCESSING TECHNIQUE BASED ON MODELING USING NURBS
77
Analysis of shaft torsional oscillation in a power system using a Lure Lyapunov function
78
Analysis of shaft torsional phenomena in governing large steam turbine generators with non-linear valve stroking
79
Analysis of shakedown of FG bree plate subjected to coupled thermal-mechanical loadings
80
Analysis of Shallow and Deep Earthquake Doublets in the Fiji-Tonga-Kermadec Region
81
Analysis of shallow cylindrical shell by boundary element method
82
Analysis of shallow instabilities in soil slopes reinforced with nailed steel wire meshes
83
Analysis of Shape Variation of a Fatigue Surface Crack in a Pipeline
84
Analysis of shared buffer switches under non-uniform traffic pattern and global flow control
85
Analysis of sharp metal edge diagonal to the cell cube in FDTD grid
86
Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet
87
Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet Original Research Article
88
Analysis of sharp polynomial upper estimate of number of positive integral points in a five-dimensional tetrahedra Original Research Article
89
Analysis of shear band instabilities in compaction of powders
90
Analysis of shear band instabilities in sintered metals
91
Analysis of shear banding in metallic glasses under bending
92
Analysis of shear banding in metallic glasses under bending Original Research Article
93
Analysis of Shear Banding in True Triaxial Tests on Sand
94
Analysis of shear capacity of lightweight concrete beams
95
Analysis of shear deformable laminated composite trapezoidal plates
96
Analysis of shear deformable plates with combined geometric and material nonlinearities by boundary element method
97
Analysis of shear induced flow in liquid crystal monolayer
98
Analysis of shear lag and shear deformation effects in laminated composite box beams under bending loads
99
Analysis of Shear Layers in a Fluid with Temperature-Dependent Viscosity
100
Analysis of shear wall structure using optimal membrane triangle element
101
Analysis of Shear Wall with Openings Using Solid65 Element
102
Analysis of shear wall with openings using super elements
103
Analysis of Shear-Critical Reinforced Concrete Beams
104
Analysis of shear-deformable composite beams in postbuckling
105
Analysis of Sheet Curvature in Asymmetrical Cold Rolling Original Research Article
106
Analysis of sheet metal formability through isotropic and kinematic hardening models
107
Analysis of shell structures under transient loading using adaptivity in time and space
108
Analysis of shell-like structures by the Boundary Element Method based on 3-D elasticity: formulation and verification
109
Analysis of shielded membrane microstrip line using the finite-difference time-domain method
110
Analysis of shielding failure parameters of high voltage direct current transmission lines
111
Analysis of shielding property in Bi-2223/Ag multifilamentary tapes with multi-layer arrangement
112
Analysis of shifting performance of power shuttle transmission
113
Analysis of shipboard aerosol optical thickness measurements from multiple sunphotometers aboard the R/V Ronald H. Brown during the Aerosol Characterization Experiment - Asia
114
Analysis of shoot apical organization in six species of the Cupressaceae based on chimeric behavior
115
Analysis of short chain chlorinated paraffins in sediment samples from the Czech Republic by short-column GC/ECNI-MS
116
Analysis of short fatigue crack growth in cast aluminum alloys
117
Analysis of short helical and double U-tube borehole heat exchangers: A simulation-based comparison
118
Analysis of short term fairness and its impact on packet level performance
119
Analysis of short-term closure of the surface energy balance above short vegetation
120
ANALYSIS OF SHORT-TERM FINANCIAL POSITION -A CASE STUDY OF RANBAXY LTD
121
Analysis of short-term influences of ambient aeroallergens on pediatric asthma hospital visits
122
Analysis of short-term solar radiation data
123
Analysis of Shotcrete Lining of Underground Tunnels
124
Analysis of shot-noise suppression in disordered quantum wires
125
Analysis of shot-peening and residual stress relaxation in the nickel-based superalloy RR1000 Original Research Article
126
Analysis of shrinkage phenomenon of whole sweet cherry fruits (Prunus avium) during convective dehydration with very simple models Original Research Article
127
Analysis of shuffled gene libraries
128
Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection
129
Analysis of sialo-N-glycans in glycoproteins as 1-phenyl-3-methyl-5-pyrazolone derivatives by capillary electrophoresis
130
Analysis of sialyl oligosaccharides by high-performance liquid chromatography-electrospray ionisation-mass spectrometry with differentiation of α2-3 and α2-6 sialyl linkages
131
Analysis of sibutramine metabolites as N-trifluoroacetamide and O-trimethylsilyl derivatives by gas chromatography–mass spectrometry in urine
132
Analysis of side writing asymmetry
133
Analysis of sigma-delta converters for MEMS sensors using power supply voltage as reference
134
Analysis of signal distortion and crosstalk penalties induced by optical filters in optical networks
135
Analysis of signal fluctuations of Cortical Spreading Depression: Preliminary findings
136
Analysis of signal propagation in an elastic-tube flow model
137
Analysis of significant lean manufacturing elements through application of interpretive structural modeling approach in Indian industry
138
Analysis of Sileye-3/Alteino data with a neural network technique: Particle discrimination and energy reconstruction Original Research Article
139
Analysis of silica fume produced by zircon desilication
140
Analysis of silica-supported vanadia by X-ray absorption spectroscopy: Combined theoretical and experimental studies
141
Analysis of siliceous materials and coal by atomic absorption spectrophotometry with fusion for sample decomposition
142
Analysis of silicon in human tissues with special reference to silicone breast implants
143
Analysis of silicon nitride bearings with laser ablation inductively coupled plasma mass spectrometry
144
Analysis of silicon terahertz diffractive optics
145
ANALYSIS OF SILYMARIN COMPONENTS IN THE SEED EXTRACTS OF SOME MILK THISTLE ECOTYPES FROM IRAN BY HPLC
146
Analysis of similarity between RNA secondary structures
147
Analysis of similarity of RNA secondary structures based on a 2D graphical representation
148
Analysis of similarity/dissimilarity of DNA sequences based on 3-D graphical representation
149
Analysis of similarity/dissimilarity of DNA sequences based on a 3-D graphical representation
150
Analysis of similarity/dissimilarity of DNA sequences based on novel 2-D graphical representation
151
Analysis of SIMOX metal-oxide-semiconductor transistors operated in the high temperature range
152
Analysis of SIMOX metal-oxide-semiconductor transistors operated in the high temperature range
153
Analysis of Simple and Imperfect Microsatellites in Ebolavirus Species and Other Genomes of Filoviridae Family
154
Analysis of Simple and Imperfect Microsatellites in Ebolavirus Species and Other Genomes of Filoviridae Family
155
Analysis of simple kinetic models in heterogeneous catalysis
156
Analysis of Simple K-Mean and Parallel K-Mean Clustering for Software Products and Organizational Performance Using Education Sector Dataset
157
Analysis of simple randomized buffer management for parallel I/O
158
Analysis of simple two-capacitor low-pass filters
159
Analysis of Simplifications Applied in Vibration Damping Modelling for a Passive Car Shock Absorber
160
Analysis of simplified position and 5-DOF total orientation workspaces of a hexapod mechanism
161
Analysis of simulated and measured pulse shapes of closed-ended HPGe detectors
162
Analysis of simulated and measured pulse shapes of closed-ended HPGe detectors
163
Analysis of simulated hypervelocity impacts on a titanium fuel tank from the Salyut 7 space station
164
Analysis of simulation models with fuzzy graph based metamodeling
165
Analysis of simultaneous gas absorption and chemical reaction to a thin liquid film over a spinning disk
166
Analysis of simultaneous gravity and tremor anomalies observed during the 2002–2003 Etna eruption
167
Analysis of simultaneous influence of operating variables on abrasive wear of phenolic composites
168
Analysis of simultaneous sheet metal forming operations using elastomer technique
169
Analysis of simultaneous water absorption and water–starch reaction during soaking of amaranth grain Original Research Article
170
Analysis of single blow effectiveness in non-uniform parallel plate regenerators
171
Analysis of single crystal casting process taking into account the shape of pigtail
172
Analysis of single crystals based on strontium–lithium–titanium oxides by inductively coupled plasma atomic emission spectrometry
173
Analysis of Single Currency Implementation in Asean+3
174
Analysis of single droplet dynamics on striped surface domains using a lattice Boltzmann method
175
Analysis of single lap adhesive composite joints with delaminated adherends
176
Analysis of single molecule folding studies with replica correlation functions
177
Analysis of Single Nucleotide Polymorphisms in HLA-DRA, IL2RA, and HMGB1 Genes in Multiple Sclerosis
178
Analysis of single particle impact breakage characteristics of raw and HPGR-crushed cement clinkers by drop weight testing
179
Analysis of single pipeline pull-in procedure using small scale models
180
Analysis of Single Rod Drop Transient in BWR Considering Detailed Intrabundle Void Distribution
181
Analysis of single side ventilated and cross ventilated rooms by varying the width of the window opening using CFD
182
Analysis of single umbilical artery with concurrent congenital anomaly: Is it a risk factor for poor prognosis? A cross-sectional study
183
Analysis of Single-Lane and Two-Lane Traffic Models by Using Cellular Automata
184
Analysis of single-molecule dynamics in liquid HF
185
Analysis of single-particle breakage by impact grinding
186
Analysis of Single-Phase Line-Start Permanent-Magnet Motor Considering Iron Loss and Parameter VariationWith Load Angle
187
Analysis of single-ring infiltrometer data for soil hydraulic properties estimation: Comparison of BEST and Wu methods
188
Analysis of single-spike FEL visible radiation from three-dimensional and realistic beams
189
Analysis of single-spike FEL visible radiation from three-dimensional and realistic beams
190
Analysis of single-step damping in a multistack variable reluctance stepping motor
191
Analysis of single-walled carbon nanotubes using the moving Kriging interpolation
192
Analysis of singular interface stresses in dissimilar material joints for plasma facing components
193
Analysis of singular stress fields at junctions of multiple dissimilar materials under mechanical and thermal loading
194
Analysis of singular stress fields at multi-material corners under thermal loading
195
Analysis of singularities for one-dimensional quasilinear hyperbolic systems
196
Analysis of sinkhole occurrences over abandoned mines using fuzzy reasoning: a case study
197
Analysis of sinusoidal-shaped frequency-selective rf pulses
198
Analysis of SIP-based mobility management in 4G wireless networks
199
Analysis of SITA policies
200
Analysis of Site Suitability for Sustainable Marine Culture at Karimunjawa National Park
201
Analysis of site-directed mutagenesis constructs by capillary electrophoresis using linear polymer sieving matrices
202
Analysis of six fungicides and one acaricide in still and fortified wines using solid-phase microextraction-gas chromatography/tandem mass spectrometry
203
Analysis of Six Orthodontic Journals in Science Citation Index and Science Citation Index Expanded: A Bibliometric Analysis
204
Analysis of six populations of Commiphora myrrha (Nees) Engl. oleo-gum resin
205
Analysis of six relevant toxaphene congeners in biological samples using ion trap MS/MS
206
Analysis of Size Changes and Incremental Growth Structures in African Catfish Synodontis schall(schall) from Tell el-Amarna, Middle Egypt
207
Analysis of size characterized manganese species from liver extracts using capillary zone electrophoresis coupled to inductively coupled plasma mass spectrometry (CZE-ICP-MS) Original Research Article
208
Analysis of Size Distributions of Primary Oxide Inclusions in Fe-10 Mass Pet Ni-M {M = Si, Ti, Al, Zr, and Ce) Alloy
209
Analysis of Size Distributions of Primary Oxide Inclusions in Fe-10 Mass Pet Ni-M {M = Si, Ti, Al, Zr, and Ce) Alloy
210
Analysis of size effects associated to the transformation strain in TRIP steels with strain gradient plasticity
211
Analysis of size effects based on a symmetric lower-order gradient plasticity model
212
Analysis of size-classified fine and ultrafine particulate matter on substrates with laser-induced breakdown spectroscopy
213
Analysis of size-classified fine and ultrafine particulate matter on substrates with laser-induced breakdown spectroscopy
214
Analysis of size-classified ice crystals by capillary electrophoresis
215
Analysis of size-distribution function of metallic nanoclusters in hydrogenated amorphous carbon matrix
216
Analysis of size-distribution function of metallic nanoclusters in hydrogenated amorphous carbon matrix
217
Analysis of size-specific dose profiles beyond the scan range in water phantoms undergoing computed tomography examinations
218
Analysis of skim milk powder deposition on stainless steel tubes in cross-flow
219
Analysis of skin movement with respect to flexional bone motion using MR images of a hand
220
Analysis of Skype VoIP traffic in UMTS: End-to-end QoS and QoE measurements
221
Analysis of slab edging by a 3-D rigid viscoplastic FEM with the combination of shifted incomplete Cholesky decomposition and the conjugate gradient method
222
Analysis of SLC40A1 gene at the mRNA level reveals rapidly the causative mutations in patients with hereditary hemochromatosis type IV
223
Analysis of Sleep Deprivation Effect to Driving Performance Using ReactionTest Simulation
224
Analysis of sleep EEG activity during hypopnoea episodes by least squares support vector machine employing AR coefficients
225
Analysis of slice transverse emittance evolution in a photocathode RF gun
226
Analysis of slice transverse emittance evolution in a photocathode RF gun
227
Analysis of slider and journal bearing using partially textured slip surface
228
Analysis of sliding wear mode on annealed steel by X-ray diffraction technique
229
Analysis of sliding wear tests of plasma processed AISI 316L steel
230
Analysis of sliding window techniques for exponentiation
231
Analysis of slip planes in three-dimensional solids Original Research Article
232
Analysis of slip transfer and deformation behavior across the α/β interface in Ti–5Al–2.5Sn (wt.%) with an equiaxed microstructure
233
Analysis of slippage in THz-FEL with a parallel plate waveguide
234
Analysis of slitless holographic spectrometers implemented by spherical beam volume holograms
235
Analysis of slope stability based on finite deformation theory
236
Analysis of slow temperature and current ramps on the central solenoid insert coil Original Research Article
237
ANALYSIS OF SLOW TRANSIENTS IN PIPE NETWORKS
238
Analysis of slug tests in bypassed wells
239
Analysis of Slug Tests in Formations of High Hydraulic Conductivity
240
Analysis of slug-tests with high-frequency oscillations
241
Analysis of SM4 sulfatide as a P-selectin ligand using model membranes Original Research Article
242
Analysis of SMA composite laminates using a multiscale modelling technique
243
Analysis of small bubbles in glass by glow discharge—Time-of-flight mass spectrometry Original Research Article
244
ANALYSIS OF SMALL BUSINESS AND PRIVATE ENTREPRENEURSHIP IN THE DEVELOPMENT OF THE ECONOMY OF THE REPUBLIC OF UZBEKISTAN
245
Analysis of small signal stability margins using genetic optimization
246
Analysis of small size combined cycle plants based on the use of supercritical HRSG
247
Analysis of small-angle neutron scattering from Fe–18Cr–10Mn–16Ni–0.5N and Fe–21Cr–10Mn–17Ni–0.5C austenites
248
Analysis of small-angle neutron scattering from Fe–18Cr–10Mn–16Ni–0.5N and Fe–21Cr–10Mn–17Ni–0.5C austenites
249
Analysis of small-angle scattering data from colloids and polymer solutions: modeling and least-squares fitting
250
Analysis of small-angle scattering data from micelles and microemulsions: free-form approaches and model fitting
251
Analysis of small-scale biological compartments by capillary electrophoresis
252
Analysis of Small‑scale Commercial Integrated Agricultural Extension Barriers
253
Analysis of small-scale heterogeneity in clastic rocks by using computerized X-ray tomography (CT)
254
Analysis of small-scale wave structures in the Saturnian a ring based on data from the Cassini interplanetary spacecraft
255
Analysis of smart laminates using piezoelectric MITC plate and shell elements
256
Analysis of SMELS and reference materials for validation of the k0-based internal monostandard NAA method using in-situ detection efficiency
257
Analysis of SMELS and reference materials for validation of the k0-based internal monostandard NAA method using in-situ detection efficiency
258
ANALYSIS OF SNOW RESERVES DEPENDENCE ON SPRING FLOOD RUNOFF (LARGE TRIBUTARIES OF THE UPPER OB AS A CASE STUDY)
259
Analysis of SNPs in the KIT gene of cattle with different coat colour patterns and perspectives to use these markers for breed traceability and authentication of beef and dairy products
260
analysis of social activities value and economy activities value agricultural technology park in aceh besar district
261
ANALYSIS OF SOCIAL DINE-OUT PREFERENCES OF THE UNIVERSITY MEMBERS ACCORDING TO PERSONAL CHARACTERISTICS: A CASE STUDY OF THE UNIVERSITY IN THE SOUTHWESTERN REGION IN THE U.S.
262
Analysis of social network sites diffusion in Mongolia
263
ANALYSIS OF SOCIAL SEXISM AND GENDER IN SPANISH
264
Analysis of Socio-Cultural Challenges Facing Local Managers in the Process of Rural Development (Case Study: Central District of Rasht County)
265
Analysis of Socio-Cultural Obstacles for Dissemination of Nanotechnology from Agricultural Experts Perspective in Iran
266
Analysis of Socio-Economic Benefits of Education in Developing Countries: A Example of Pakistan
267
Analysis of socio-economic impacts of sustainable sugarcane–ethanol production by means of inter-regional Input–Output analysis: Demonstrated for Northeast Brazil
268
Analysis of sodium aerosol using transversely excited atmospheric CO2 laser-induced gas plasma spectroscopy
269
Analysis of sodium polyacrylate absorbent dust using ultra-trace sodium analysis—a seven-company collaborative study
270
Analysis of sofalcone in human plasma by high performance liquid chromatography
271
Analysis of softening zone on the surface of 20Mn2SiCrMo bainitic railway switch
272
Analysis of software bug causes and its prevention
273
ANALYSIS OF SOFTWARE COST ESTIMATION MODELS
274
Analysis of Software Fault Removal Policies Using a Non-Homogeneous Continuous Time Markov Chain
275
Analysis of Soil and Crop Properties for Precision Agriculture for Winter Wheat
276
Analysis of soil and dust samples for polychlorinated biphenyls by enzyme-linked immunosorbent assay (ELISA) Original Research Article
277
Analysis of soil carbon outcomes from interaction between climate and grazing pressure in Australian rangelands using Range-ASSESS
278
Analysis of soil characteristics, soil management and sugar yield on top and averagely managed farms growing sugar beet (Beta vulgaris L.) in the Netherlands
279
Analysis of soil compression curves from uniaxial confined compression tests
280
Analysis of Soil Erodibility Factor for Hydrologic Processes in Kereke Watershed, North Central Nigeria
281
Analysis of soil humic acids in particle size fractions of an alfisol from a Mediterranean-type climate
282
Analysis of soil loss data from plots of differing length for the Sparacia experimental area, Sicily, Italy
283
Analysis of soil organic carbon and vegetation cover trends along the Botswana Kalahari Transect
284
Analysis of Soil Populations of Aspergillus flavus Link. from Pistachio Orchards in Iran for Vegetative Compatibility
285
Analysis of Soil Populations of Aspergillus flavus Link. from Pistachio Orchards in Iran for Vegetative Compatibility
286
Analysis of soil shrinkage data
287
Analysis of soil surface component patterns affecting runoff generation. An example of methods applied to Mediterranean hillslopes in Alicante (Spain)
288
Analysis of soil water and water stress for pearl millet in an Indian arid region using the SPAW Model
289
Analysis of soil wetting and solute transport in subsurface trickle irrigation
290
Analysis of soil, roots and mycorrhizae in a Norway spruce declining forest
291
Analysis of soil-vegetation systemsʹ sensitivity to changes of climate-dependent carbon turnover parameters
292
Analysis of SOL behaviour in JET MkIIGB using an advanced onion-skin solver (OSM2)
293
Analysis of solar aided heat pump systems with seasonal thermal energy storage in surface tanks Original Research Article
294
Analysis of solar chemical processes for hydrogen production from water splitting thermochemical cycles
295
Analysis of solar desiccant cooling system for an institutional building in subtropical Queensland, Australia
296
Analysis of solar heat gain factors using sky clearness index and energy implications
297
Analysis of solar hydrogen production in Algeria: Case of an electrolyzer-concentrating photovoltaic system
298
Analysis of solar narrow band dm-spikes observed at 1420 and 2695 MHz
299
Analysis of solar photovoltaic-powered village electrification at Abou-Sorra in Damascus region
300
Analysis of Solar PV System and Solar Thermal Energy To Meet a Dairy Industry Energy Needs: A Case Study
301
Analysis of solar radiation data for Gebze, Turkey
302
Analysis of solar radiation data for Trabzon, Turkey
303
Analysis of solar radiation for sunlit glass shaded by vertical adjustable flat slats
304
Analysis of Solar Radiation in Jordan
305
Analysis of solar radiation measurements at Al-Arish area, North Sinai, Egypt
306
Analysis of solar radiation transfer: A method to estimate the porosity of a plastic shading net
307
Analysis of solid elastic cylinders with internal losses using complete sets of functions
308
Analysis of solid oxide fuel cell system concepts with anode recycling
309
Analysis of solid particle mixing in inclined fluidized beds using DEM simulation
310
Analysis of solid samples by capillary electrophoresis using a gas extraction sampling device in a flow system
311
Analysis of solid samples by capillary electrophoresis using a gas extraction sampling device in a flow system Original Research Article
312
Analysis of solid samples using supported liquid membranes: a method for the evaluation of the release of nicotine from Swedish snuff Original Research Article
313
Analysis of solid solutions stability in scheelite-type molybdates and tungstates
314
Analysis of solid wood beams strengthened with CFRP laminates of distinct lengths
315
Analysis of solidification and melting of PCM with energy generation
316
Analysis of Solids, Liquids, and Biological Tissues Using Solids Probe Introduction at Atmospheric Pressure on Commercial LC/MS Instruments
317
Analysis of soluble and insoluble fractions of alkali and subcritical water treated sugarcane bagasse
318
Analysis of Soluble Carbohydrates, Proteins and Lipids in Shoots of M 7 Apple Rootstock Cultured in vitro during Regeneration of Adventitious Roots
319
Analysis of soluble CD14 and its use as a biomarker in neonatal foals with septicemia and horses with recurrent airway obstruction
320
Analysis of soluble CD14 and its use as a biomarker in neonatal foals with septicemia and horses with recurrent airway obstruction
321
Analysis of Soluble Mesenchymal-Epithelial Transition Factor and Hepatocyte Growth Factor Serum Levels in Children With Autism Spectrum Disorder
322
Analysis of solute transport in a heterogeneous aquifer: the Krauthausen field experiment
323
Analysis of Solute Transport in Flow Fields Influenced by Preferential Flowpaths at the Decimeter Scale
324
Analysis of solution space-dependent performance of simulated annealing: the case of the multi-level capacitated lot sizing problem
325
Analysis of Solution-Deposited Alkali Ions by Cluster Surface Collisions
326
Analysis of solutions for passively activated safety shutdown devices for SFR
327
Analysis of solutions of a noncanonical Hamilton–Jacobi equation using the generalized characteristics method and the Hopf–Lax representations
328
Analysis of Solvent Central Nervous System Toxicity and Ethanol Interactions Using a Human Population Physiologically Based Kinetic and Dynamic Model
329
Analysis of solvent dyes in refined petroleum products by electrospray ionization mass spectrometry
330
Analysis of solvent extracts from coal liquefaction in a flowing solvent reactor
331
Analysis of solvent flux through nanofiltration membranes by mechanistic, chemometric and hybrid modelling
332
Analysis of solvent-free ethyl oleate enzymatic synthesis at equilibrium conditions
333
Analysis of solvents mixtures employing rank annihilation factor analysis on near infrared spectral data from sequential addition of analyte
334
Analysis of somatic NF1 promoter methylation in plexiform neurofibromas and Schwann cells
335
Analysis of some alcohol molecules based on the change of RGB components of interferentially colored calixarene films
336
Analysis of some aspects of learning and memorization processes in an adult population
337
Analysis of some available heat transfer coefficients applicable to solar chimney power plant collectors
338
ANALYSIS OF SOME BIOCHEMICAL AND HAEMATOLOGICAL PARAMETERS FOR MUCUNA PRURIENS (DC) SEED POWDER IN MALE RATS
339
Analysis of some breakfast cereals on the French market for their contents of ochratoxin A, citrinin and fumonisin B1: development of a method for simultaneous extraction of ochratoxin A and citrinin
340
Analysis of some chosen elements of cerebrospinal fluid and serum in amyotrophic lateral sclerosis patients by total reflection X-ray fluorescence
341
Analysis of some coal-related model compounds and coal derivates with atmospheric solids analysis probe mass spectrometer
342
Analysis of some cod-desalting process variables Original Research Article
343
Analysis of some common pathogens and their drug resistance to antibiotics
344
Analysis of some cytokinins in coconut (Cocos nucifera L.) water by micellar electrokinetic capillary chromatography after solid-phase extraction
345
Analysis of some effects caused by interaction between bulk solid and r.c. silo wall structure
346
Analysis of some Factors Affecting Production Process of Rubber Seed Oil-based Biodiesel by Opinion Discrimination Analytical Modelling
347
Analysis of some flexible families of distributions for estimation of wind speed distributions
348
Analysis of some herbal plants from India used in the control of diabetes mellitus by NAA and AAS techniques
349
Analysis of some mixed elements for the Stokes problem
350
Analysis of some non-linear effects in quantitative electron paramagnetic resonance spectrometry. Non-linear effects due to the use of cavities with TE102 and TM110 modes
351
Analysis of some organochlorine pesticides in an urban atmosphere (Strasbourg, east of France)
352
Analysis of Some Putative Novel Peptides from Iranian Scorpion Venom Glands, Hemiscorpius lepturus, Using cDNA Library Construction
353
Analysis of some recharge solutions on varying the R407C composition
354
Analysis of some selected catechins and caffeine in green tea by high performance liquid chromatography
355
Analysis of some stabilized low-order mixed finite element methods for Reissner–Mindlin plates Original Research Article
356
Analysis of sonolytic degradation products of azo dye Orange G using liquid chromatography–diode array detection-mass spectrometry
357
Analysis of sonolytic degradation products of azo dye Orange G using liquid chromatography–diode array detection-mass spectrometry
358
Analysis of soot particles derived from biodiesels and diesel fuel air-flames
359
Analysis of sorption properties of starch–protein extrudates with the use of water vapour Original Research Article
360
Analysis of sound absorption by periodic structures using a hybrid-boundary element/mode expansion method
361
ANALYSIS OF SOUND TRANSMISSION THROUGH PERIODICALLY STIFFENED PANELS BY SPACE-HARMONIC EXPANSION METHOD
362
Analysis of source code metrics from ns-2 and ns-3 network simulators
363
Analysis of source contributions to the ambient aerosol sample by simulated annealing
364
Analysis of source models for two-dimensional acoustic systems using the transfer matrix method
365
Analysis of source policy and its effects on TCP in rate-controlled ATM networks
366
Analysis of source regions for smoke events in Singapore for the 2009 El Nino burning season
367
Analysis of source-follower buffers implemented with graded-channel SOI nMOSFETs operating at cryogenic temperatures Original Research Article
368
Analysis of sources and partitioning of oxidant in the UK—Part 1: the NOX-dependence of annual mean concentrations of nitrogen dioxide and ozone
369
Analysis of sources and partitioning of oxidant in the UK—Part 2: contributions of nitrogen dioxide emissions and background ozone at a kerbside location in London
370
Analysis of sources of variability of runoff volume in a 40 plot experiment using a numerical model
371
Analysis of South Carolina hydrogen and fuel cell workers views and opinion leadership behavior: A waiting opportunity?
372
Analysis of South Korea’s economic growth, carbon dioxide emission, and energy consumption using the Markov switching model
373
Analysis of southeast Australian zooplankton observations of 1938–42 using synoptic oceanographic conditions
374
Analysis of Sovereign External Debt Variations by Cross Wavelet Transform
375
Analysis of SP’s[4][6][8] Unit Ramp Function Through Examples
376
Analysis of space and energy distribution of stress-induced oxide traps
377
Analysis of space and energy distribution of stress-induced oxide traps
378
Analysis of space charge fields using Lienard–Wiechert potentials and the method of images in the RF-free electron laser photoinjectors
379
Analysis of space charge fields using Lienard–Wiechert potentials and the method of images in the RF-free electron laser photoinjectors
380
Analysis of space target detection range based on space-borne fisheye imaging system in deep space background
381
Analysis of spacecraft antenna systems: Implications for STEREO/WAVES Original Research Article
382
Analysis of space-dependent characteristics of motion-compensated frame differences based on a statistical motion distribution model
383
Analysis of spallation mechanism in thermal barrier coatings with graded bond coats using the higher-order theory for FGMs
384
Analysis of Spanish populations of Ophiostoma ulmi and O. novo-ulmi using phenotypic characteristics and RAPD markers
385
Analysis of spatial and temporal patterns in a large reservoir using water quality and hydrodynamic modeling
386
Analysis of spatial and temporal patterns in a large reservoir using water quality and hydrodynamic modeling
387
Analysis of spatial and temporal variation in the levels of microbial fecal indicators in the major rivers flowing into the Aegean Sea, Turkey
388
Analysis of spatial and temporal variations of PM 10 concentrations in the Netherlands using Kalman filtering
389
Analysis of spatial contiguity influences on state price level formation
390
Analysis of spatial distribution and temporal trend of reference evapotranspiration and pan evaporation in Changjiang (Yangtze River) catchment
391
Analysis of Spatial Distribution of Pre-hospital Emergency Medical Services in Traffic Accidents: Mashhad City, Iran
392
Analysis of spatial distribution of Tehran Metropolis urban services using models of urban planning
393
Analysis of spatial distributions of accidents
394
Analysis of spatial frailty models by a weighted estimating equation
395
Analysis of Spatial Inequalities in Tehran Metropolis
396
Analysis of spatial interpolation in the material-point method
397
Analysis of spatial scales for ecosystem services: Application of the lacunarity concept at landscape level in Galicia (NW Spain)
398
Analysis of spatial smoothing with uniform circular arrays
399
Analysis of spatial variability of SPT penetration resistance in collapsible soils considering water table depth
400
Analysis of spatially dependent data
401
Analysis of spatio-temporal dynamic pattern and driving forces of urban land in China in 1990s using TM images and GIS
402
Analysis of special surfactants by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry
403
Analysis of species of the Ranunculaceae for ecdysteroid agonists and antagonists - II. Ecdysteroids in the genus Anemone
404
Analysis of species of the Ranunculaceae for ecdysteroid agonists and antagonists—I. Ecdysteroids in the genus Pulsatilla
405
Analysis of specific correlations and general models for the surface tension of six liquid oxides
406
Analysis of specific discharge rate functions in industrial scale cement grinding multi-compartment ball mills to assist ball mill modeling
407
Analysis of specific interactions of synthetic glycopolypeptides carrying N-acetyllactosamine and related compounds with lectins
408
Analysis of specimen size effects in inclined compression test on laminated elastomeric bearings
409
Analysis of specimen thickness effect on interlaminar fracture toughness of fibre composites using finite element models
410
Analysis of specimen thickness effect on interlaminar fracture toughness of fibre composites using finite element models
411
Analysis of speckle images to assess surface roughness
412
Analysis of speckle patterns in phase-contrast images of lung tissue
413
Analysis of speckle patterns in phase-contrast images of lung tissue
414
Analysis of spectinomycin by liquid chromatography with pulsed electrochemical detection
415
Analysis of spectra in reverse overwrite
416
Analysis of spectra obtained by cold-atom photoassociation spectroscopy: the Rb2 1g and 0g− electronic states up to 100 Å
417
Analysis of spectral absorption features in hyperspectral imagery
418
Analysis of spectral components in the 1.5 μm emission band of Er3+ doped borosilicate glass
419
Analysis of spectral properties of acoustic noise produced during magnetic resonance imaging
420
Analysis of spectrum distribution and optical losses under Fresnel lenses
421
Analysis of speech segment duration with the lognormal distribution: A basis for unification and comparison
422
Analysis of speed characteristics for rural two-lane roads: A field study from Minoufiya Governorate, Egypt
423
Analysis of spent fuel assemblies using a lead slowing down spectrometer
424
Analysis of spent fuel assemblies using a lead slowing down spectrometer
425
Analysis of Sperm Chromosome Complements Before, During, and After Chemotherapy
426
Analysis of spherical indentation of materials with plastically graded surface layer
427
Analysis of spherical indentation of superelastic shape memory alloys
428
Analysis of spherical indentations of coating-substrate systems: Experiments and finite element modeling
429
Analysis of SPI drought class transitions using loglinear models
430
Analysis of Spiders’Joint Kinematics and Driving Modes under Different Ground Conditions
431
Analysis of spin flip data in rings with nearly full Siberian Snakes
432
Analysis of spin flip data in rings with nearly full Siberian Snakes
433
Analysis of spin-diffusion measurements by iterative optimisation of numerical models
434
Analysis of Spixs disc-winged bat association patterns and roosting home ranges reveal a novel social structure among bats
435
Analysis of Spixʹs disc-winged bat association patterns and roosting home ranges reveal a novel social structure among bats
436
Analysis of splenic and thymic lymphocyte subpopulations in chickens infected with Salmonella enteritidis
437
Analysis of splenic and thymic lymphocyte subpopulations in chickens infected with Salmonella enteritidis
438
Analysis of split operator methods applied to reactive transport with Monod kinetics
439
Analysis of split operator methods applied to reactive transport with Monod kinetics
440
Analysis of split operator methods for nonlinear and multispecies groundwater chemical transport models Original Research Article
441
Analysis of splitting spinning force by the principal stress method
442
Analysis of sponge zones for computational fluid mechanics
443
Analysis of Spontaneous Gene Conversion Tracts within and between Mammalian Chromosomes
444
Analysis of spontaneous magnetoencephalography data by similarity measures
445
Analysis of sporamin forms expressed in different subcellular compartments of transgenic tobacco plants by IMAC and ESI-MS
446
Analysis of Sport Marketing Researchers in Google Scholar
447
Analysis of sports injuries in training and competition for handball players
448
Analysis of spouted bed pressure fluctuations during particle coating
449
Analysis of SPR measurements from HART II
450
Analysis of sprinkler irrigation management in the LASESA district, Monegros (Spain)
451
Analysis of spur gear forms with tapered tooth profile
452
Analysis of spurious synchronization with positive conditional Lyapunov exponents in computer simulations
453
Analysis of square and rectangular footings subjected to eccentric-inclined load resting on reinforced sand
454
Analysis of square tables with ordered categories
455
Analysis of squeaking on ceramic hip endoprosthesis using the complex eigenvalue method
456
Analysis of squeal noise and mode coupling instabilities including damping and gyroscopic effects
457
Analysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods
458
Analysis of squirrel cage induction motors with broken bars and rings
459
Analysis of stabilised output error methods
460
Analysis of stability and accuracy of finite-difference schemes on a skewed mesh
461
Analysis of stability and bifurcation for an SEIR epidemic model with saturated recovery rate
462
Analysis of stability and convergence in FD simulations of the 1-D ultrasonic wave propagation
463
Analysis of stability and Hopf bifurcation for a delay-differential equation model of HIV infection of CD4+ T-cells
464
Analysis of stability and Hopf bifurcation for a viral infectious model with delay
465
Analysis of stability and mechanization trends in small farms of Khuzestan province
466
Analysis of Stability and Performance of Adaptation Algorithms With Time-Invariant Gains
467
Analysis of stability and quench in HTS devices—New approaches
468
Analysis of stability of bioconvection of motile oxytactic bacteria in a horizontal fluid saturated porous layer
469
Analysis of stability of earthen dams in kachchh region, Gujarat, India
470
Analysis of stability of three-dimensional slopes using the rigorous limit equilibrium method
471
Analysis of stabilization operators for Galerkin least-squares discretizations of the incompressible Navier–Stokes equations Original Research Article
472
Analysis of stabilized higher-order finite element approximation of nonstationary and nonlinear convection–diffusion–reaction equations
473
Analysis of Stabilizer Structures of Canola Fields in Qazvin Province
474
Analysis of stabilizing process for stress-erection of Strarch frame
475
Analysis of stable all-optical limiting in nonlinear periodic structures
476
Analysis of stable crack growth of a semi-elliptical surface crack by numerical simulation Original Research Article
477
Analysis of Stable Crack Growth on the Basis of a Two-Criterion Approach
478
Analysis of staggered tube bundle heat transfer to vertical foam flow
479
Analysis of stagnation point flow toward a stretching sheet
480
Analysis of stagnation points for a pumping well in recharge areas
481
Analysis of stainless steel welded joints: a comparison between destructive and non-destructive techniques
482
Analysis of stamping performances of dual phase steels: A multi-objective approach to reduce springback and thinning failure
483
Analysis of Standard Education Financing Management in State Vocational Schools
484
Analysis of standard sieving method for milled biomass through image processing. Effects of particle shape and size for poplar and corn stover
485
Analysis of STAP algorithms for cases with mismatched steering and clutter statistics
486
Analysis of starch amylolysis using plots for first-order kinetics
487
Analysis of startup oscillations in natural circulation boiling systems Original Research Article
488
Analysis of start-up tests of household refrigeration systems. A potential for on-line predictions of test results
489
Analysis of start-up transition dynamics of TCP NewReno
490
Analysis of state space system identification methods based on instrumental variables and subspace fitting
491
Analysis of states of water in poly (vinyl alcohol) based DMFC membranes using FTIR and DSC O
492
Analysis of state-specific phosphorylation of proteins by two-dimensional gel electrophoresis approach
493
Analysis of static and dynamic stability of slopes armed with geotextiles (Case study: Maragheh Alavian earth-dam)
494
Analysis of static friction and elastic forces in a nanowire bent on a flat surface: A comparative study
495
Analysis of stationary deformation behavior of a semi-infinite rigid-perfect plastic beam subjected to moving distributed loads of finite width
496
Analysis of Stationary Fluid Queue Driven by State-Dependent Birth-Death Process Subject to Catastrophes
497
Analysis of stationary fuel cell dynamic ramping capabilities and ultra capacitor energy storage using high resolution demand data
498
Analysis of stationary iterative methods for the discrete convection–diffusion equation with a 9-point compact scheme
499
Analysis of statistical repeatability of a fixed bed downdraft biomass gasification facility
500
Analysis of stayability in South African Angus cattle using a threshold model
501
Analysis of steady flows in viscous fluid with heat/mass transfer and slip effects
502
Analysis of Steady-State Brillouin Nonlinearity in High-Power Fiber Lasers
503
Analysis of steady-state characteristics of misaligned hydrodynamic journal bearings with isotropic roughness effect
504
Analysis of steady-state performance for cross-directional control
505
Analysis of steady-state tracking errors in sampled-data systems with uncertainty
506
Analysis of steam and hydrogen distributions with PAR mitigation in NPP containments
507
Analysis of steam and hydrogen distributions with PAR mitigation in NPP containments Original Research Article
508
Analysis of steam generator loss-of-feedwater experiments with APROS and RELAP5/MOD3.1 computer codes Original Research Article
509
Analysis of steel bolted connections by means of a nonsmooth optimization procedure
510
Analysis of steel/concrete interfacial shear stress by means of pull out test
511
Analysis of steel–concrete composite PR-frames in partial shear interaction: A numerical model and some applications
512
Analysis of steel–concrete composite PR-frames in partial shear interaction: A numerical model and some applications
513
Analysis of steel-reinforced concrete-filled-steel tubular (SRCFST) columns under cyclic loading
514
Analysis of steep-fronted voltage distribution and turn insulation failure in inverter-fed form-wound AC motor
515
Analysis of stellar interferometers as wave-front sensors
516
Analysis of stent edge restenosis with different forms of brachytherapy
517
Analysis of stereoelectronic properties of camptothecin analogues in relation to biological activity Original Research Article
518
Analysis of stereoelectronic properties, mechanism of action and pharmacophore of synthetic indolo[2,1-b]quinazoline-6,12-dione derivatives in relation to antileishmanial activity using quantum chemical, cyclic voltammetry and 3-D-QSAR CATALYST procedures
519
Analysis of sterilization effect by pulsed dielectric barrier discharge
520
Analysis of steroid hormones in effluents of wastewater treatment plants by liquid chromatoraphy–tandem mass spectrometry
521
Analysis of steroidal lipids by gas and liquid chromatography
522
Analysis of steroids in environmental water samples using solid-phase extraction and ion-trap gas chromatography–mass spectrometry and gas chromatography–tandem mass spectrometry
523
Analysis of steroids in human urine by on line liquid chromatography–gas chromatography–mass spectrometry using the Through Oven Transfer Adsorption Desorption interface and a fraction collector Original Research Article
524
Analysis of steroids in yeast-mediated cell culture by on-line solid-phase extraction coupled high-performance liquid chromatography electrospray-ionization/mass spectrometry and novel continuous postcolumn infusion of internal standard technique Original
525
Analysis of Sterol Glucosides in Momordica charantia L. Extracts and Nutraceutical Products
526
Analysis of steryl esters in cocoa butter by on-line liquid chromatography–gas chromatography
527
Analysis of sticking coefficients and uptake of trace gases by liquid droplets
528
Analysis of stiffened corrugated plates based on the FSDT via the mesh-free method
529
Analysis of stiffened corrugated plates based on the FSDT via the mesh-free method
530
Analysis of stiffened plates by the boundary element method
531
Analysis of stiffness of adhesive joints in car bodies
532
Analysis of stir die cast Al–SiC composite brake drums based on coefficient of friction
533
Analysis of stirred mill performance using DEM simulation: Part 1– Media motion, energy consumption and collisional environment
534
Analysis of stirred mill performance using DEM simulation: Part 2 – Coherent flow structures, liner stress and wear, mixing and transport
535
Analysis of STL files
536
Analysis of stochastic dual dynamic programming method
537
Analysis of stochastic gradient identification of Wiener-Hammerstein systems for nonlinearities with Hermite polynomial expansions
538
Analysis of stochastic gradient tracking of time-varying polynomial Wiener systems
539
Analysis of stochastic mimetic finite difference methods and their applications in single-phase stochastic flows
540
Analysis of stochastic min-max-plus systems: Results and conjectures
541
Analysis of stochastic numerical schemes for the evolution equations of geophysics Original Research Article
542
Analysis of stochastic Petri nets with signals
543
Analysis of stock market indices through multidimensional scaling
544
Analysis of Stock Market Manipulation using Generative Adversarial Nets and Denoising Auto-Encode Models
545
Analysis of stock market manipulations using knowledge discovery techniques applied to intraday trade prices
546
Analysis of stock prices of mining business
547
Analysis of Stone Mastic Asphalt (Sma) Slab Dimensions for Evaluation of the Newly Developed Roller Compactor (Turamesin)
548
Analysis of storage conditions of a wheat silo-bag for different weather conditions by computer simulation
549
Analysis of storage facilities for urban stormwater quantity control
550
Analysis of strain and stress in the equine hoof using finite element analysis: Comparison with minimum principal strains recorded in vivo
551
Analysis of strain and stress in the lower forging limit of Ti-6Al-2Mo-2Cr titanium alloy
552
Analysis of strain error sources in micro-beam Laue diffraction
553
Analysis of strain error sources in micro-beam Laue diffraction
554
Analysis of strain gage method for measurement of post-gel shrinkage in resin composites
555
Analysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology
556
Analysis of strain localization for ductile materials with effect of void growth
557
Analysis of strain localization for ductile materials with effect of void growth
558
Analysis of strain localization for ductile materials with effect of void growth
559
Analysis of strain rate dependence of tensile elongation for a mechanical milling Al–1.1Mg–1.2Cu alloy tested at 748 K from a dislocation dynamics viewpoint
560
Analysis of strain rate dependence of tensile elongation for a mechanical milling Al–1.1Mg–1.2Cu alloy tested at 748 K from a dislocation dynamics viewpoint
561
Analysis of strain rate sensitivity of carbon/epoxy woven composites
562
Analysis of strain stress state in roller compaction process
563
Analysis of strain-life fatigue parameters and behaviour of different groups of metallic materials
564
Analysis of Strand Transfer and Template Switching Mechanisms of DNA Gap Repair by Homologous Recombination in Escherichia coli: Predominance of Strand Transfer
565
Analysis of strategic planning of Dutch pig farmers using a multivariate probit model
566
Analysis of strategic plans to assess planning for sustainability of comprehensive community initiatives
567
Analysis of strategies for reducing calcium deficiencies in glasshouse grown tomatoes: model functions and simulations
568
Analysis of strategies to improve the directionality of square lattice band-edge photonic crystal structures
569
Analysis of stratum grouting influence on shaft lining stress with the methods of simulation and in site measurements
570
Analysis of strawberry volatiles using comprehensive two-dimensional gas chromatography with headspace solid-phase microextraction
571
Analysis of stream flow drought and deficiency in the west of Iran
572
Analysis of stream temperature and heat budget in an urban river under strong anthropogenic influences
573
Analysis of strength and moduli of jointed rocks
574
Analysis of strength development in cement-stabilized silty clay from microstructural considerations
575
Analysis of strength properties of light-cured resin composites
576
Analysis of strengthening in AA6111 during the early stages of aging: Atom probe tomography and yield stress modelling
577
Analysis of strengthening mechanisms in a severelyplastically- deformed Al–Mg–Si alloy with submicron grain size
578
Analysis of Strengthening Mechanisms in an Artificially Aged Ultrafine Grain 6061 Aluminum Alloy
579
Analysis of Strengths, Weaknesses, Opportunities and Threats of E-learning from the Perspective of Experts in the Period of COVID-19 Pandemic
580
Analysis of strengths, weaknesses, opportunities, and threats of electronic dental and oral records in clinics of School of Dentistry, Tehran University of Medical Sciences, Iran: A qualitative study
581
Analysis of stress and deformation states in wedge indented face-centered cubic single crystals
582
Analysis of stress and electric fields in a rectangular piezoelectric body with a center crack under anti-plane shear loadin
583
Analysis of stress concentration around a spheroidal cavity under asymmetric dynamic loading
584
Analysis of stress concentration during tension of round pultruded composite rods
585
Analysis of stress concentration during tension of round pultruded composite rods: Errata
586
ANALYSIS OF STRESS CONCENTRATION FACTOR IN BOLTED JOINT USING FINITE ELEMENT METHOD
587
Analysis of stress concentrations in plates with rectangular openings by a combined conformal mapping – Finite element approach
588
Analysis of stress distribution around pin loaded holes in orthotropic plates
589
Analysis of stress distribution in caliber rolling by the energy method using finite-element division
590
Analysis of stress distribution in the alveolar septa of normal and simulated emphysematic lungs
591
Analysis of stress distributions under lightweight wheeled vehicles
592
Analysis of stress in cross wedge rolling with application to failure
593
Analysis of stress in cross wedge rolling with application to failure
594
Analysis of stress in cross wedge rolling with application to failure
595
Analysis of stress intensity factor (SIF) for cracked tubular K-joints subjected to balanced axial load
596
Analysis of stress intensity factors and T-stress to control crack propagation for kerf-less spalling of single crystal silicon foils
597
Analysis of Stress Intensity Factors in Hollow Cylinders Reinforced by an Effective Coating Containing Multiple Cracks
598
Analysis of stress intensity factors of a ring-shaped interface crack
599
Analysis of stress localization in hydroturbine stator-scroll system
600
Analysis of stress ratio effects on fatigue propagation in a sintered duplex steel by experimentation and artificial neural network approaches
601
Analysis of stress singularities in thin coatings bonded to a semi-infinite elastic substrate
602
Analysis of Stress-dependent Permeability in Nonorthogonal Flow and Deformation Fields
603
Analysis of stresses and breakage of crystalline silicon wafers during handling and transport
604
Analysis of stresses during the freezing of solid spherical foods
605
Analysis of stresses generated during hydrogen extraction from and injection into Ni(OH)2/NiOOH film electrode
606
Analysis of stresses generated during hydrogen transport through a Pd foil electrode under potential sweep conditions
607
Analysis of stresses in a simply-supported composite beam with stiffened lateral ends using displacement-potential field
608
Analysis of stresses in a simply-supported composite beam with stiffened lateral ends using displacement-potential field
609
Analysis of stresses in aluminum–silicon alloys
610
Analysis of stresses in complete upper dentures with flat teeth at differing inclinations
611
Analysis of Stresses in Tapered Rectangular Utility Pole
612
Analysis of Stresses in Tapered Rectangular Utility Pole
613
Analysis of stresses in two-dimensional isostatic granular systems
614
Analysis of Stresses Induced in Mandibular Bone as a Result of Occlusal Forces Applied on Implant Supported Overdenture with Different Teeth Inclinations (Three Dimensional FiniteElement Analysis)
615
Analysis of stress-induced phase transformations in elastoplastic materials with strain-softening behavior under plane shear
616
Analysis of stress–strain of architect woven fabric strength under biaxial extensions
617
Analysis of Striatal Dynamics: The Existence of Two Modes of Behaviour
618
Analysis of striation formation mechanism in abrasive water jet cutting
619
Analysis of striking distances of lightning strokes to vertical towers
620
Analysis of strip electric saturation model of crack problem in piezoelectric material
621
Analysis of Strip Temperature in Hot Rolling Process by Finite Element Method Original Research Article
622
Analysis of Stroke Organization in the Backstroke as a Function of Skill
623
Analysis of stromal-epithelial interactions in prostate cancer identifies PTPCAAX2 as a potential oncogene
624
ANALYSIS OF STRUCTURAL ACOUSTIC COUPLING OF A CYLINDRICAL SHELL WITH AN INTERNAL FLOOR PARTITION
625
Analysis of structural and functional properties of Ni50Mn30Ga20 after plastic deformation
626
Analysis of structural and magnetic phase transition behaviors of La1−xSrxCrO3 by measurement of heat capacity with thermal relaxation technique
627
Analysis of structural and magnetic phase transition behaviors of La1−xSrxCrO3 by measurement of heat capacity with thermal relaxation technique
628
Analysis of structural and thermal properties of Li2TiO3 ceramic powders
629
Analysis of structural break models based on the evolutionary spectrum: Monte Carlo study and application
630
Analysis of structural changes during plastic deformations of amorphous polyethylene
631
Analysis of structural characteristics of social capital for increasing the resilience of social-ecological systems (Case study: Kalateh Rudbar, Semnan province)
632
Analysis of Structural Dynamics in the Ribosome by TLS Crystallographic Refinement
633
Analysis of structural equation models with censored or truncated data via EM algorithm
634
Analysis of structural equation models with censored or truncated data via EM algorithm
635
Analysis of structural failures in timber structures: Typical causes for failure and failure modes
636
Analysis of structural heterogeneity of fucoidan from Hizikia fusiforme by ES-CID-MS/MS
637
Analysis of structural heterogeneity of κ/β-carrageenan oligosaccharides from Tichocarpus crinitus by negative-ion ESI and tandem MALDI mass spectrometry
638
Analysis of structural imperfections of silicon on insulator structures
639
Analysis of structural imperfections of silicon on insulator structures
640
Analysis of Structural Pattern of Road Access Network in Villages Exporting Agricultural Crops (Case Study: Maragheh City
641
Analysis of structural performance of sandwich plates with foam-filled aluminum hexagonal honeycomb core
642
Analysis of structural phase transition behavior of Ln2NiO4 + δ (Ln: Nd, Pr) with variation of oxygen content
643
Analysis of structural phase transition from monoclinic Ba2Fe2O5 to cubic Ba2Fe2O5+δ
644
Analysis of structural phase transition of Nd2NiO4 + δ by scanning thermal measurement under controlled oxygen partial pressure
645
Analysis of structural properties of refractory compounds at high temperature and pressure using a potential model Original Research Article
646
Analysis of Structural Reliability of Complex Coefficients Fractional-Order System Using Plane Transformation
647
Analysis of structural reliability under parameter uncertainties
648
Analysis of structural statistical properties of proteases and nonproteases
649
Analysis of structural transformation in wool fiber resulting from oxygen plasma treatment using vibrational spectroscopy
650
Analysis of structural transformations during the synthesis of a MoVTeNb mixed oxide catalyst Original Research Article
651
Analysis of structural variability within two-dimensional biological crystals by a combination of patch averaging techniques and self organizing maps
652
Analysis of structural variability within two-dimensional biological crystals by a combination of patch averaging techniques and self organizing maps
653
Analysis of Structural Vibrations due to Passage of Underground Trains
654
Analysis of structural, and electronic properties of clopidogrel drug adsorption on armchair (5, 5) Single-walled carbon nanotube
655
Analysis of structural, thermal and dielectric properties of LiTi2(PO4)3 ceramic powders
656
Analysis of structurally discontinuous reinforced concrete building frames using the ASI technique
657
Analysis of structurally modified polyacrylamides by on-line thermochemolysis-GC–MS
658
Analysis of structure and properties of active carbons and their copolymeric precursors
659
Analysis of structure and properties of biodegradable regenerated silk fibroin fibers
660
Analysis of structure and strain at the meso-scale in 2D granular materials
661
Analysis of structure of energy consumption and dynamics of emission of atmospheric species related to the global environmental change (SOx, NOx, and CO2) in Asia
662
Analysis of structure–activity relationships for the ‘A-region’ of N-(4-t-butylbenzyl)-N′-[4-(methylsulfonylamino)benzyl]thiourea analogues as TRPV1 antagonists
663
Analysis of structure–activity relationships for the ‘B-region’ of N-(3-acyloxy-2-benzylpropyl)-N′-[4-(methylsulfonylamino)benzyl]thiourea analogues as vanilloid receptor antagonists: discovery of an N-hydroxythiourea analogue with potent analgesic activi
664
Analysis of structure–activity relationships for the ‘B-region’ of N-(4-t-butylbenzyl)-N′-[4-(methylsulfonylamino)benzyl]-thiourea analogues as TRPV1 antagonists
665
Analysis of structure–activity relationships with the N-(3-acyloxy-2-benzylpropyl)-N′-[4-(methylsulfonylamino)benzyl]thiourea template for vanilloid receptor 1 antagonism Original Research Article
666
Analysis of structured LTI uncertainty in sampled-data systems
667
Analysis of Structure–Function Relationships in the Colibactin-Maturating Enzyme ClbP
668
Analysis of Structure-Permeability Correlation of Nitrophenol Analogues in Newborn Rat Abdominal Skin using Semiempirical Molecular Orbital Calculation Original Research Article
669
Analysis of structure-property relationships in isolated cells during OD treatments. Effect of initial structure on the cell behaviour Original Research Article
670
Analysis of structures convertible to repeated structures using graph products
671
Analysis of structures subjected to random wind loading by simulation in the frequency domain
672
Analysis of Strychnos alkaloids in traditional Chinese medicines with improved sensitivity by sweeping micellar electrokinetic chromatography Original Research Article
673
Analysis of stuck pipe in deviated boreholes
674
analysis of student interpersonal intelligence in mathematics learning: case study junior high school state (smp n) in sukoharjo
675
Analysis of Students’ Creative Thinking in Solving Arithmetic Problems
676
Analysis of Students’ Mistakes in Solving Integrals to Minimize their Mistakes
677
ANALYSIS OF STUDY HABITS AND LEARNING STYLES IN UNIVERSITY STUDENTS
678
Analysis of Subcellular Prefoldin 1 Redistribution During Rabies Virus Infection
679
Analysis of subcellular sized particles: Capillary electrophoresis with post-column laser-induced fluorescence detection versus flow cytometry
680
Analysis of subconjunctival hemorrhage
681
Analysis of subcooled boiling flow with one-group interfacial area transport equation and bubble lift-off model Original Research Article
682
Analysis of subcritical crack growth in dental ceramics using fracture mechanics and fractography
683
Analysis of subgrid scale mixing using a hybrid LES-Monte-Carlo PDF method
684
Analysis of subgrid scale models
685
Analysis of submarine landsliding in the rupture area of the 27 February 2010 Maule earthquake, Central Chile
686
Analysis of submerged arc welding process by three-dimensional computational fluid dynamics simulations
687
Analysis of sub-micron parameters derived from multi-altitude and multi-spectral AOD measurements acquired during the 2009 PAM-ARCMIP airborne campaign
688
Analysis of sub-pixel snow and ice extent over the extratropical Andes using spectral unmixing of historical Landsat imagery
689
Analysis of subscapularis integrity and function after lesser tuberosity osteotomy versus subscapularis tenotomy in total shoulder arthroplasty using ultrasound and validated clinical outcome measures
690
Analysis of subsidence using TerraSAR-X data: Murcia case study
691
Analysis of subspace migrations in limited-view inverse scattering problems
692
Analysis of Substance Abuse in Male Adolescents
693
Analysis of substance P in rat brain by means of immunoaffinity capture and matrix-assisted laser desorption/ionization time-of-flight mass-spectrometry
694
Analysis of Substituent Effects on C-13 NMR Parameters of Substituted Arylacetylene Derivatives. Linear Free Energy Relationships and PM3 Semiempirical Calculations
695
Analysis of Substrate Recognition Determinants in a Synthetic Peptide Containing the Tyr 1173 Autophosphorylation Site of the Epidermal Growth Factor Receptor
696
Analysis of substructure evolution during simple shear of polycrystals by means of a combined viscoplastic self-consistent and disclination modeling approach Original Research Article
697
Analysis of substructuring preconditioners for mortar methods in an abstract framework Original Research Article
698
Analysis of subsurface crack propagation under rolling contact loading in railroad wheels using FEM
699
Analysis of subsystem randomness effects on the mid-frequency vibrations of built-up structures
700
Analysis of sucralose and other sweeteners in water and beverage samples by liquid chromatography/time-of-flight mass spectrometry
701
Analysis of sucrose esters – insecticides from the surface of tobacco plant leaves
702
Analysis of sudan I, sudan II, sudan III, and sudan IV in food by HPLC with electrochemical detection: Comparison of glassy carbon electrode with carbon nanotube-ionic liquid gel modified electrode
703
Analysis of sugar phosphates in plants by ion chromatography on a titanium dioxide column with pulsed amperometric detection
704
Analysis of sugars by liquid chromatography-mass spectrometry in Jerusalem artichoke tubers for bioethanol production optimization
705
Analysis of sugars in bee pollen and propolis by ligand exchange chromatography in combination with pulsed amperometric detection and mass spectrometry
706
Analysis of sugars in bee pollen and propolis by ligand exchange chromatography in combination with pulsed amperometric detection and mass spectrometry
707
Analysis of sugars in environmental samples by gas chromatography–mass spectrometry
708
Analysis of sugars in traditional Chinese drugs
709
Analysis of sugars, organic acids and vitamin C contents of blackberry genotypes from Turkey
710
Analysis of sulfate resistance in concrete based on artificial neural networks and USBR4908-modeling
711
Analysis of sulfatide from rat cerebellum and multiple sclerosis white matter by negative ion electrospray mass spectrometry
712
Analysis of sulfide layer on gallium arsenide using X-ray photoelectron spectroscopy
713
Analysis of sulfides in the presence of ferric minerals by diffusion methods
714
Analysis of sulfides in whole rock matrices by elemental analyzer–continuous flow isotope ratio mass spectrometry
715
Analysis of sulfobutyl ether-β-cyclodextrin mixtures by ion-spray mass spectrometry and liquid chromatography–ion-spray mass spectrometry
716
Analysis of sulfonamide and quinolone antibiotic residues in Korean milk using microbial assays and high performance liquid chromatography
717
Analysis of sulfonated compounds by ion-exchange high-performance liquid chromatography–mass spectrometry
718
Analysis of sulfophthalimide and some of its derivatives by liquid chromatography–electrospray ionization tandem mass spectrometry
719
Analysis of sulfur compounds from the in-oven roast beef aroma by comprehensive two-dimensional gas chromatography
720
Analysis of sulfur in carbonaceous compounds by laser microprobe/mass spectrometry and temperature-programmed oxidative pyrolysis
721
Analysis of sulfur speciation on chalcopyrite surface bioleached with Acidithiobacillus ferrooxidans
722
Analysis of sulfur-induced selectivity changes for anhydrous methanol dehydrogenation on Ni(100) surfaces
723
Analysis of sulfur–iodine thermochemical cycle for solar hydrogen production. Part I: decomposition of sulfuric acid
724
Analysis of sulphonated dyes and intermediates by electrospray mass spectrometry
725
Analysis of sulphone based organic–inorganic hybrid epoxy nanocomposites for advanced engineering applications—Study of the mechanical, thermomechanical, XRD, EDS and physical properties
726
Analysis of superalloy turbine blade tip cracking during service
727
Analysis of supercavitating and surface-piercing propeller flows via BEM
728
Analysis of superconductivity in Ba1−xKxBiO3 on the basis of indirect-exchange mediated pairing
729
Analysis of superconductor oxides YBa2Cu3O8−x by inductively coupled plasma atomic emission spectrometry and complexometric titration
730
Analysis of supercritical CO2 cooling in macro- and micro-channels
731
Analysis of superposed strain: A case study from Barr Conglomerate in the South Delhi Fold Belt, Rajasthan, India
732
Analysis of supersaturated designs via the Dantzig selector
733
Analysis of supersonic separators geometry using generalized radial basis function (GRBF) artificial neural networks
734
Analysis of supplier buyer relationships using resource constrained project scheduling strategies
735
Analysis of supplier equilibrium strategy considering transmission constraints
736
Analysis of supply chain, scale factor, and optimum plant capacity for the production of ethanol from corn stover
737
Analysis of supply chains with quantity based fixed incentives
738
Analysis of supply contracts with minimum total order quantity commitments and non-stationary demands
739
Analysis of supply contracts with quantity flexibility
740
Analysis of supply voltage distortion effects on induction motor operation
741
Analysis of support pressure for stabilization of rock blocks in the Zaker tunnel
742
Analysis of support requirements for a shallow diversion tunnel at Guledar dam site, Turkey
743
Analysis of support zones in composite concrete beams using MCFT
744
Analysis of Suprapubic and Transrectal Measurements in Assessment of Prostate Dimensions and Volume Is Transrectal Ultrasonography Really Necessary for Prostate Measurements?
745
Analysis of surface and aerosol polarized reflectance for aerosol retrievals from polarized remote sensing in PRD urban region
746
Analysis of surface and bulk behavior in Ni–Pd alloys Original Research Article
747
Analysis of surface and bulk polymerization of a thin film using a chemical derivatization technique and TOF-SIMS
748
Analysis of surface and bulk properties of amphiphilic drug ibuprofen and surfactant mixture in the absence and presence of electrolyte
749
Analysis of surface and material modifications caused by laser drilling of AlN ceramics
750
Analysis of surface and sub-surface initiated spalling of forged cold work rolls
751
Analysis of surface and subsurface of sliding electrical contact steel/steel in magnetic field
752
Analysis of surface coverage of benzotriazole and 6-tolyltriazole mixtures on copper electrodes from surface-enhanced Raman spectra
753
Analysis of surface crack growth under rolling contact fatigue
754
Analysis of surface cracks in multi-crystalline thin silicon wafers
755
Analysis of surface defects using a novel developed fiber-optics laser scanning system
756
Analysis of surface deformation patterns using 3D finite element method: A case study in the Skåne area, Sweden
757
Analysis of surface films on lithium in various organic electrolytes
758
Analysis of surface integral equations in electromagnetic scattering and radiation problems
759
Analysis of surface irrigation systems with WinSRFR—Example application
760
Analysis of surface layers and wear products by Mössbauer spectral analysis
761
Analysis of surface oscillation of droplet under microgravity for the determination of its surface tension Original Research Article
762
Analysis of surface oxidation behavior at 500 °C under dry air of glass-like carbon heat-treated from 1200 to 3000 °C
763
Analysis of surface ozone and nitrogen oxides at urban, semi-rural and rural sites in Istanbul, Turkey Original Research Article
764
Analysis of surface plasmon resonance in the composite core(Au)/interlayer/shell(Ag) nanoparticles
765
Analysis of surface properties of fixed and live cells using derivatized agarose beads
766
Analysis of surface properties of human cancer cells using derivatized beads
767
Analysis of surface roughening in AA6111 automotive sheet Original Research Article
768
Analysis of surface roughness and chip cross-sectional area while machining with self-propelled round inserts milling cutter
769
Analysis of surface roughness and cutting force during turning of Ti6Al4V ELI in dry environment
770
Analysis of surface roughness and material removal rate in machining of AISI 1040 steel using CNC turning process
771
Analysis of Surface Roughness and Micro-hardness in Roller Burnishing of Aluminum Alloy 6061
772
Analysis of surface roughness and microleakage of fissure sealants following organic debris removal with Carisolv
773
Analysis of surface roughness effects on heat transfer in micro-conduits
774
Analysis of surface roughness for parts formed by computer numerical controlled incremental forming
775
Analysis of surface roughness of cold-rolled aluminium foil
776
Analysis of surface roughness parameters in turning of FRP tubes by PCD tool
777
Analysis of surface structure of carbon materials by using temperature-programmed desorption method
778
Analysis of surface structures of hydrogen bonding in protein–ligand interactions using the alpha shape model
779
Analysis of surface texture generated by a flexible magnetic abrasive brush
780
Analysis of surface topography of ash particles obtained from sludge combustion using tapping-mode AFM
781
Analysis of Surface Water Quality using Multivariate Statistical Approaches: A case study in Ca Mau Peninsula, Vietnam
782
Analysis of surface-state and impact-ionization effects on breakdown characteristics and gate-lag phenomena in narrowly recessed gate GaAs FETs
783
Analysis of surgeries for Degenerative lumbarstenosis in elderly patients
784
Analysis of surgical and diagnostic quality at a specialist breast unit
785
Analysis of surgical approaches for unstable thoracolumbar burst fracture: minimum of five year follow-up
786
Analysis of surgical complications and patient outcomes in a residency training program
787
Analysis of surgical emergencies in Benghazi, Libyan Arab Jamahiriya
788
Analysis of Surgical Outcome in Complex Double-Outlet Right Ventricle With Heterotaxy Syndrome or Complete Atrioventricular Canal Defect
789
Analysis of Surgical Procedures for Breast Cancer in Pakistan Institute of Medical Sciences: A Decade of Change
790
Analysis of surgical treatment for asymptomatic unruptured aneurysms in the brain check-up
791
Analysis of Surgically Treated Cutaneous Malignancies in a Tertiary Dermatology Center During a Six-Year Period
792
Analysis of surrogate markers for target-specific therapy in breast carcinomas using archival materials
793
Analysis of surveillance test interval by Markov process for SDS1 in CANDU nuclear power plants
794
Analysis of surveillance test interval by Markov process for SDS1 in CANDU nuclear power plants
795
Analysis of survival and disease free survival of four hundred and fifty-two lobular carcinomas
796
Analysis of survival curves in seasonally mated pastoral goat herds in northern Kenya using logistic regression techniques
797
Analysis of Survival Data from Case–Control Family Studies
798
Analysis of survival in a sample of elderly patients from Ragusa, Italy on the basis of a primary care level multidimensional evaluation
799
Analysis of Survival in Patients with β-thalassemia Major in Guilan, Northern Iran
800
Analysis of suspension and heat transfer characteristics of Al2O3 nanofluids prepared through ultrasonic vibration
801
Analysis of Sustainable Travel Pattern in Downtown Neighborhoods by Using a Combination of Space Syntax and GIS (Case Study: Districts 1 and 7 Qom City)
802
ANALYSIS OF SUSTAINABLE WATER RESOURCE MANAGEMENT IN AGRICULTURE: CASE OF KURDISTAN, IRAN
803
Analysis of sustained long-period activity at Etna Volcano, Italy
804
Analysis of Suzuki, Shanker, and Kumar formulations under strong compressions Original Research Article
805
Analysis of SVC and TCSC controllers in voltage collapse
806
Analysis of SWAP-70 as a Candidate Gene for Non-X-Linked Hyper IgM Syndrome and Common Variable Immunodeficiency
807
Analysis of S-Wave Attenuation in South-Central Alaska
808
Analysis of Swelling and Shrinkage Behavior of Compacted Clays
809
Analysis of swirling flow in hydrocyclones operating under dense regime
810
Analysis of Switched Inductor Three-level DC/DC Converter
811
Analysis of switched normal discrete-time systems Original Research Article
812
Analysis of switched systems using the bond graph methods
813
Analysis of switched-capacitor common-mode feedback circuit
814
Analysis of switching insurance plan type: Comparison of two statistical methods
815
Analysis of Symbolic Meanings between Chinese and English Food Proverbs from the Perspective of Cultural Linguistics
816
Analysis of Symmetric and Asymmetric Shocks of Oil Price on Stock Market Index: (NARDL Approach)
817
Analysis of symmetric matrix valued functions I Original Research Article
818
Analysis of symmetry breaking in quartz blocks using superstatistical random-matrix theory
819
Analysis of Symmetry of Weight-Bearing in Athletes With and Without Low Back Pain during Gait
820
Analysis of synchronous machine modeling for simulation and industrial applications
821
Analysis of syndecan-1 gene promoter during mouse tooth development
822
Analysis of synonymous codon usage bias and nucleotide and amino acid composition in 13 species of Flaviviridae
823
Analysis of synonymous codon usage in 11 Human Bocavirus isolates
824
Analysis of synonymous codon usage in H5N1 virus and other influenza A viruses
825
Analysis of synonymous codon usage in SARS Coronavirus and other viruses in the Nidovirales
826
Analysis of synthetic 19-norsteroids trenbolone, tetrahydrogestrinone and gestrinone by gas chromatography–mass spectrometry
827
Analysis of synthetic antioxidants and preservatives in edible vegetable oil by HPLC/TOF-MS
828
Analysis of synthetic canine training aids by comprehensive two-dimensional gas chromatography–time of flight mass spectrometry
829
Analysis of synthetic derivatives of peptide hormones by capillary zone electrophoresis and micellar electrokinetic chromatography with ultraviolet-absorption and laser-induced fluorescence detection
830
Analysis of synthetic endocrine-disrupting chemicals in food: A review
831
ANALYSIS OF SYNTHETIC OIL SAMPLES DURING AN OPERATING TEST
832
Analysis of synthetic peptides by capillary electrophoresis: Effect of organic solvent modifiers and variable electrical potentials on separation efficiencies
833
Analysis of synthetic phenolic antioxidants in edible oils by micellar electrokinetic capillary chromatography
834
Analysis of Syrian lustre pottery (12th–14th centuries AD)
835
Analysis of systematic effects on congenital sensorineural deafness in German Dalmatian dogs
836
Analysis of systematic error in “bead method” measurements of meteorite bulk volume and density
837
Analysis of systemic risk in multilateral net settlement systems
838
Analysis of T Cell Receptor Vβ Diversity in Peripheral CD4+ and CD8+ T Lymphocytes Obtained From Patients With Chronic Severe Hepatitis B
839
Analysis of T cell responses against hepatitis C virus genotype 4 in Egypt
840
Analysis of T wave changes by activation recovery interval in patients with atrial septal defect
841
Analysis of T-2 and HT-2 toxins in cereal grains by immunoaffinity clean-up and liquid chromatography with fluorescence detection
842
Analysis of tacrolimus and creatinine from a single dried blood spot using liquid chromatography tandem mass spectrometry
843
Analysis of Tai Chi Ideological and Political Course in University Based on Big Data and Graph Neural Networks
844
Analysis of Takens-Bogdanov bifurcation by characteristic functions Original Research Article
845
Analysis of Talent Management And Succession Planning In The Iranian Educational System, From The Views of Secondary School Principals
846
Analysis of Tamm–Horsfall protein by high-performance liquid chromatography with native fluorescence
847
Analysis of tamoxifen and its metabolites in synthetic gastric fluid digests and urine samples using high-performance liquid chromatography with electrospray mass spectrometry
848
Analysis of TAP1333, TAP1637, TAP2379 Polymorphisms in Patients with Schizophrenia
849
Analysis of tape spring hinges
850
Analysis of tape spring hinges
851
Analysis of tapered ENF specimen and characterization of bonded interface fracture under Mode-II loading
852
Analysis of target configurations under dead loads for cable-supported bridges
853
Analysis of Target Lesion Length Before Coronary Artery Stenting Using Angiography and Near-Infrared Spectroscopy Versus Angiography Alone
854
Analysis of tauopathies with transgenic mice
855
Analysis of Tax Compliance and Impacts on Regional Budgeting and Public Welfare
856
Analysis of tax incentives for energy-efficient durables in the EU
857
Analysis of Tb3+- and melittin-binding with the C-terminal domain of centrin in Euplotes octocarinatus
858
Analysis of t-b-W and t-t-Z couplings from CLEO and LEP/SLC data
859
Analysis of TbZn resistivity temperature derivative above the Curie point using singular fitting equations
860
Analysis of T-cell defects in the specific immune response against acute lymphoblastic leukemia cells
861
Analysis of T-cell receptor Vβ repertoire in liver-infiltrating lymphocytes in chronic hepatitis C
862
Analysis of T-cell responses in malaria-exposed and non-exposed donors using Plasmodium falciparum asexual blood stages enriched by a simple centrifugation method
863
Analysis of TCP live experiments on a real GEO satellite testbed
864
Analysis of TCP performance on multi-hop wireless networks: A cross layer approach
865
Analysis of tea components by high-performance liquid chromatography and high-performance capillary electrophoresis
866
Analysis of Teacher Talk on the Basis of Relevance Theory
867
Analysis of Teacher-Student Interaction in Class Learning and Application of Arabic at Islamic Science University Malaysia (USIM)
868
Analysis of Teaching Practicum in Terms of Duration and Suggestion of a Solution
869
Analysis of tear film breakup on Etafilcon A hydrogel lenses
870
Analysis of technetium-99 in soil and deposition samples by inductively coupled plasma mass spectrometry
871
Analysis of Technical Efficiency of Smallholder Cocoa Farmers in Cross River State, Nigeria
872
Analysis of Technical Efficiency of Sugarcane Crop in Khyber Pakhtunkhwa: A Stochastic Frontier Approach
873
Analysis of technological innovation from business economics and management
874
Analysis of technological learning for the Thai manufacturing industry
875
Analysis of Technology Attributes Influencing Non - Adoption of Apiary Production Technologies: The Case IFAD Bee Farmers in Cross River State, Nigeria
876
Analysis of technology transfer in CDM projects: An update
877
Analysis of teleconnections between AVHRR-based sea surface temperature and vegetation productivity in the semi-arid Sahel
878
Analysis of telephone network traffic based on a complex user network
879
Analysis of Telephone System of a University Campus and Design of a Converged VoIP System
880
Analysis of telomere length and thymic output in fast and slow/non-progressors with HIV infection
881
Analysis of Telomeric Repeats and Telomerase Activity in Human Colon Carcinoma Cells with Gene Amplification
882
Analysis of temperature and component form-error variation with the manufacturing cycle during the forward extrusion of components
883
Analysis of temperature and impurity distributions in a unidirectional-solidification process for multi-crystalline silicon of solar cells by a global model
884
Analysis of Temperature and Microstructure in the Quenching of Steel Cylinders
885
Analysis of Temperature and Microstructure in the Quenching of Steel Cylinders
886
Analysis of temperature and pressure changes in liquefied natural gas (LNG) cryogenic tanks Original Research Article
887
Analysis of temperature and speed effects on the drawing stress for improving the wire drawing process
888
Analysis of temperature and stress distribution of superheater tubes after attemperation or sootblower activation
889
Analysis of Temperature Change in Capital City of Bangladesh
890
Analysis of Temperature Change Properties in Tehran Using Satellite Data
891
Analysis of temperature controlled ventilated embankment
892
Analysis of temperature dependence of Ge-on-Si p–i–n photodetectors
893
Analysis of temperature dependent fluorescence polarization for dimethylaminobenzonitrile Original Research Article
894
Analysis of temperature difference driven heat and mass transfer in the Phillips–Onsager cell
895
Analysis of temperature distribution in potato tissue during blanching and its effect on the absolute residual pectin methylesterase activity Original Research Article
896
Analysis of temperature distributions in Kamaboko during microwave heating Original Research Article
897
Analysis of temperature during drilling of Ti6Al4V with minimal quantity of lubricant
898
Analysis of Temperature Effect on a Crystalline Silicon Photovoltaic Module Performance
899
Analysis of temperature effect on ceramic brick production from alluvial deposits, Tamilnadu, India
900
Analysis of Temperature Effects in the Design of CNTFET-based Analog Circuits
901
Analysis of Temperature Effects in the Design of NOT Gate Based on CNTFET
902
Analysis of temperature effects near mode I cracks in glassy polymers
903
Analysis of temperature effects on seasonal and interannual variation in CH4 emission from rice-planted pots
904
Analysis of Temperature Field and Thermal Crown of Roll During Hot Rolling by Simplified FEM Original Research Article
905
Analysis of temperature gradient bifurcation in porous media – An exact solution
906
Analysis of temperature influences on the amplitude–frequency characteristics of Rn gas concentration
907
Analysis of temperature time-series: Embedding dynamics into the MDS method
908
Analysis of temperature variability and determination of apparent thermal diffusivity in sandy intertidal sediments at the German North Sea coast
909
Analysis of temperature-dependent electrical resistivity of ZnO nano-structures Original Research Article
910
Analysis of temperature-dependent spin-resolved photoemission of Ni(110) by a single-particle model
911
Analysis of temperature-sensitive magnetic fluids in a porous square cavity depending on different porosity and Darcy number
912
Analysis of temporal and spatial decay of pulsed neutrons in single- and multiple-core systems
913
Analysis of temporal changes of mammographic features: Computer-aided classification of malignant and benign breast masses
914
Analysis of temporal fluctuations in Bach’s sinfonias
915
Analysis of Temporal Structures of Seismic Events on Different Scale Levels
916
Analysis of temporal variation and species-site relationships of witness tree data in southeastern Pennsylvania
917
Analysis of temporal variation in human masticatory cycles during gum chewing
918
Analysis of ten abused drugs in urine by large volume sample stacking–sweeping capillary electrophoresis with an experimental design strategy
919
Analysis of tensile and fracture toughness results on irradiated molybdenum alloys, TZM and Mo–5%Re
920
Analysis of tensile bond strengths using Weibull statistics
921
Analysis of tensile deformation and failure in austenitic stainless steels: Part I – Temperature dependence
922
Analysis of tensile deformation and failure in austenitic stainless steels: Part II – Irradiation dose dependence
923
Analysis of terpanes in biodegraded oils from China using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry
924
Analysis of terpene compounds in Cimicifuga foetida L. by reversed-phase high-performance liquid chromatography with evaporative light scattering detection
925
Analysis of terpenes in white wines using SPE–SPME–GC/MS approach Original Research Article
926
Analysis of terrace width distributions on vicinal copper surfaces using the ‘Wigner surmise’: comparison with Gaussian approach
927
Analysis of terrain using multispectral images
928
Analysis of TerraSAR-X data and their sensitivity to soil surface parameters over bare agricultural fields
929
Analysis of TerraSAR-X data sensitivity to bare soil moisture, roughness, composition and soil crust
930
Analysis of terrestrial solar radiation exergy
931
Analysis of Terrorism Fact in Television News Within Context of TRT’s News Discourse
932
Analysis of tert-butyldimethylsilyl derivatives in heavy gas oil from brazilian naphthenic acids by gas chromatography coupled to mass spectrometry with electron impact ionization
933
Analysis of Test Day Milk Yield by Random Regression Models and Evaluation of Persistency in Iranian Dairy Cows
934
Analysis of test results of a ground demonstration of a Pluto/Express power generator
935
Analysis of test suite reduction with enhanced tie-breaking techniques
936
Analysis of testbeam data of irradiated silicon prototype sensors for the CMS tracker upgrade
937
Analysis of testbeam data of irradiated silicon prototype sensors for the CMS tracker upgrade
938
Analysis of tetrabromobisphenol A and other phenolic compounds in water samples by non-aqueous capillary electrophoresis coupled to photodiode array ultraviolet detection
939
Analysis of tetrabromobisphenol A in a product and environmental samples
940
Analysis of tetracycline residues in royal jelly by liquid chromatography–tandem mass spectrometry
941
Analysis of tetracyclines in chicken tissues and dung using LC–MS coupled with ultrasound-assisted enzymatic hydrolysis
942
Analysis of tetrahydro-β-carboline-3-carboxylic acids in foods by solid-phase extraction and reversed-phase high-performance liquid chromatography combined with fluorescence detection
943
Analysis of tetramethylammonium–montmorillonite and retention of toluene from aqueous solution
944
Analysis of tetramethylene disulfotetramine in foods using solid-phase microextraction–gas chromatography–mass spectrometry
945
Analysis of tetramethylpyrazine in Ephedrae herba by gas chromatography–mass spectrometry and high-performance liquid chromatography
946
ANALYSIS OF TEXTILE AND CLOTHING SECTOR: IRAN CASE
947
Analysis of textile-reinforced concrete structures under consideration of non-traditional uncertainty models
948
Analysis of texture and R value variations in asymmetric rolling of IF steel
949
Analysis of texture evolution in equal channel angular extrusion of copper using a new flow field Original Research Article
950
Analysis of texture evolution in magnesium during equal channel angular extrusion Original Research Article
951
Analysis of texture evolution in pure magnesium and the magnesium alloy AM30 during rod and tube extrusion
952
Analysis of textures heterogeneity in cold and warm asymmetrically rolled aluminium
953
ANALYSIS OF TF-SF BOUNDARY FOR 2D-FDTD WITH PLANE P-WAVE PROPAGATION IN LAYERED DISPERSIVE AND LOSSY MEDIA
954
Analysis of Th1, Th17 and regulatory T cells in tuberculosis case contacts
955
Analysis of the (nu)2, (nu)4 infrared hot bands and (nu)1 CARS spectrum of 34S^(16)O3
956
Analysis of the [56,2+] baryon masses in the 1/Nc expansion
957
Analysis of the ‘Biarez–Favre’ and ‘Burland’ models for the compressibility of remoulded clays
958
Analysis of the ‘new electrical model’ of sonoluminescence
959
Analysis of the ‘new electrical model’ of sonoluminescence
960
Analysis of the “dilemma effect” in fifth-order deflection aberration
961
Analysis of the “dilemma effect” in fifth-order deflection aberration
962
Analysis of the “Gone with the Wind” and its Simplified Version in terms of Lexical Structure
963
Analysis of the 1.55 eV PL band of CdTe polycrystalline films
964
Analysis of the 1:5 soil: water extract in burnt soils to evaluate fire severity
965
Analysis of the 11B(7Li, 7Be)11Be reaction at 57 MeV in a microscopic approach Original Research Article
966
Analysis of the 11β-Hydroxysteroid Dehydrogenase Type 2 Gene (HSD11B2) in Human Essential Hypertension
967
Analysis of the 16 Environmental Protection Agency priority polycyclic aromatic hydrocarbons by high performance liquid chromatography-oxidized diamond film electrodes
968
Analysis of the 16O(p,(gamma))^17F capture reaction using the shell model embedded in the continuum
969
Analysis of the 16O(p,γ)17F capture reaction using the shell model embedded in the continuum Original Research Article
970
Analysis of the 16S–23S rDNA intergenic spacers (IGSs) of marine vibrios for species-specific signature DNA sequences
971
Analysis of the 1D heat conduction problem for a single fin with temperature dependent heat transfer coefficient – Part II. Optimum characteristics of straight plate and cylindrical pin fins
972
Analysis of the 1-D heat conduction problem for a single fin with temperature dependent heat transfer coefficient: Part I – Extended inverse and direct solutions
973
Analysis of the 2009 earthquake swarm near Sunset Crater volcano, Arizona
974
Analysis of the 22-NBD-cholesterol transfer between liposome membranes and its relation to the intermembrane exchange of 25-hydroxycholesterol
975
Analysis of the 237Np–233Pa photon spectrum using the full response function method
976
Analysis of the 3-D shape of the terrestrial bow shock by interball/magion 4 observations Original Research Article
977
Analysis of the 3-omega method for thermal conductivity measurement
978
Analysis of the 3Π0,1−X 1Σ+ transition of gallium monoiodide
979
Analysis of the 50-year records of the atmospheric deposition of long-lived radionuclides in Japan
980
Analysis of the 8.1 ancestral MHC haplotype in severe, pneumonia-related sepsis
981
Analysis of the A(TA)nTAA configuration in the promoter region of the UGT1 A1 gene in Greek patients with thalassemia intermedia and sickle cell disease
982
Analysis of the Abfraction Lesions Formation Mechanism by the Finite Element Method
983
Analysis of the absorbing layers for the weakly-compressible lattice Boltzmann methods
984
Analysis of the absorption and emission spectra of poly(p-phenylene vinylene) films thermally converted at a relatively low temperature
985
Analysis of the Absorption Spectra of Styrene-butadiene in Toluene
986
Analysis of the acceleration phase of a theropod dinosaur based on a Cretaceous trackway from Korea
987
Analysis of the accident with the coolant discharge into the plasma vessel of the W7-X fusion experimental facility
988
Analysis of the Accompaniment of Justice and Politics in Imam Khamenei’s Political Jurisprudential Thought
989
Analysis of the accuracy of a neural algorithm for defect depth estimation using PCA processing from active thermography data
990
ANALYSIS OF THE ACCURACY OF THE SOLUTION TO THE AIRCRAFT GRAVITY GRADIOMETRY PROBLEM
991
ANALYSIS OF THE ACCURACY OF THE SOLUTION TO THE AIRCRAFT GRAVITY GRADIOMETRY PROBLEM
992
Analysis of the action mechanism of Fang Ji Huang Qi decoction in treating rheumatoid arthritis by network pharmacology
993
Analysis of the action mechanism of polymer dispersant on dense ethanol alumina suspension using colloidal probe AFM
994
Analysis of the Action to Combat to Impunity of Modern piracy from the Perspective of International Law
995
Analysis of the activated sludge model (number 1)
996
Analysis of the active components of silymarin
997
Analysis of the active fraction of Iranian Naja naja oxiana snake venom on the metabolite profiles of the malaria parasite by 1HNMR in vitro
998
Analysis of the active layer in SI GaAs Schottky diodes
999
Analysis of the active layer in SI GaAs Schottky diodes
1000
Analysis of the Active-Site Mechanism of Tyrosyl-DNA Phosphodiesterase I: A Member of the Phospholipase D Superfamily
