<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Analysis of the Translator’s Use of Plurality to Overcome Culture Industry in Translation of Poems: The Case of Elahi’s Translation of T. S. Eliot’s AshWednesday into Farsi
2
Analysis of the Translators’ Social and Psychological Trends from the Perspective of Intertextuality
3
Analysis of the transmission ratio and efficiency ranges of the four-, five-, and six-link planetary gear trains
4
Analysis of the transpiration cooling of a thin porous plate in a hot laminar convective flow
5
Analysis of the transport pathways and potential sources of PM10 in Shanghai based on three methods Original Research Article
6
Analysis of the transverse cracking in hybrid cross-ply composite laminates
7
Analysis of the transverse energy distribution of hopping electrons through a glass funnel
8
Analysis of the transverse heat transfer coefficients in a dual channel ITER-type cable-in-conduit conductor Original Research Article
9
Analysis of the transverse kick to beams in low-frequency photoinjectors due to wakefield effects
10
Analysis of the transverse kick to beams in low-frequency photoinjectors due to wakefield effects
11
Analysis of the Travelling Forklift in Material Transport Activities in a Manufacturing Plant
12
Analysis of the treatment effect on recurrent bleeding and death in patients with cirrhosis and esophageal varices : Multistage competing-risks model compared to conventional methods
13
Analysis of the Treatment Efficacy of Percutaneous Catheter Drainage Under CT Guidance for Severe Acute Necrotizing Pancreatitis
14
Analysis of the tribocorrosion mechanisms in a pin-on-plate combination on the example of AISI304 steel
15
Analysis of the tribological behaviour of polymer composite tool materials for sheet metal forming
16
Analysis of the tritium breeding ratio benchmark experiments using the Monte Carlo code TRIPOLI-4
17
Analysis of the trophic network of a macrotidal ecosystem: the Bay of Somme (Eastern Channel)
18
Analysis of the truncation errors in the fast multipole method for scattering problems
19
Analysis of the tube-sheet cracking in slurry oil steam generators
20
Analysis of the tumoral cytotoxicity of green tea-infusions enriched with broccoli
21
Analysis of the turbine standstill for a grid connected wind farm (case study)
22
Analysis of the turbulence observed in the outer cusp turbulent boundary layer Original Research Article
23
Analysis of the turbulence–radiation interactions for large eddy simulations of turbulent flows
24
Analysis of the turbulent burning velocity
25
Analysis of the Turbulent Flow and Heat Transfer of the Impingement Cooling in a Channel with Cross Flow
26
Analysis of the twisting department at Superior Cable Corporation: A case study
27
Analysis of the two-dimensional Datta–Das spin field effect transistor
28
Analysis of the UDP-glucuronosyltransferase gene in Portuguese patients with a clinical diagnosis of Gilbert and Crigler–Najjar syndromes
29
Analysis of the ultralow friction behavior of a mesogenic fluid in a reciprocating contact
30
Analysis of the unbound spectrum of 12Li
31
Analysis of the uncertainties in gas uptake measurements using the Sieverts method
32
Analysis of the uncertainty associated with the estimation of nitrogen losses from farming systems
33
Analysis of the unconventional behavior of oil relative permeability during depletion tests of gas-saturated heavy oils
34
Analysis of the Understanding of Muslim Will Writing in Melacca
35
Analysis of the Uniaxial Magnetic Properties of High-Spin d6 Ions at Trigonal Prism and Linear Two-Coordinate Sites: Uniaxial Magnetic Properties of Ca3Co2O6 and Fe[C(SiMe3)3]2
36
Analysis of the unrest of active volcanoes using variations of the base level noise seismic spectrum
37
Analysis of the unsaponifiable fraction of lipids belonging to various milk-types by using comprehensive two-dimensional gas chromatography with dual mass spectrometry/flame ionization detection and with the support of high resolution time-of-flight mass
38
Analysis of the unstable behaviour of a single-phase natural circulation loop with one-dimensional and computational fluid-dynamic models
39
Analysis of the unstable fracture behaviour of a high strength low alloy steel weldment
40
Analysis of the unsteadiness of a plasma jet and the related turbulence
41
Analysis of the uranium L3-edge X-ray absorption spectra of some actinides
42
Analysis of the uranium L3-edge X-ray absorption spectra of some actinides
43
Analysis of the urban heat island effects on building energy consumption
44
Analysis of the Urban Water Requisition Demand for the Purpose of Reengineering and Water Network Optimization (Case Study: Tabriz Eram Urban Area)
45
Analysis of the urban/rural broadband divide in Canada: Using GIS in planning terrestrial wireless deployme nt
46
Analysis of the use of industrial control systems in simulators: State of the art and basic guidelines
47
Analysis of the use of specimen mammography in breast conservation therapy
48
Analysis of the Utility of Economic Sectors in Achieving Agricultural Development: Applying an Analytic Hierarchy Process
49
Analysis of the vaccine potential of a laboratory Escherichia coli strain in a Japanese flounder model
50
Analysis of the vacuum solution of the five-dimensional Einstein field equations with negative cosmological constant via variational symmetries
51
Analysis of the value for unit commitment of improved load forecasts
52
Analysis of the vaporization process for a nano-scale liquid thread by molecular dynamics simulation
53
Analysis of the vaporization process in TG apparatus and its incidence in pyrolysis
54
Analysis of the vaporization process in TG apparatus and its incidence in pyrolysis
55
Analysis of the variability of joint input–output estimation methods
56
Analysis of the variability of RSSI values for active RFID-based indoor applications
57
Analysis of the variability of temperature gradient in the ocean frontal zones based on satellite data Original Research Article
58
Analysis of the variability of the axial dipole moment of a numerical geodynamo model
59
ANALYSIS OF THE VARIABILITY OF TUNISIAN ISOLATES OF LETTUCE MOSAIC VIRUS USING BIOLOGICAL AND MOLECULAR PROPERTIES
60
Analysis of the variable effect of dietary vitamin E supplements on experimental atherosclerosis
61
Analysis of the variable length nonzero window method for exponentiation
62
Analysis of the variation in eccentricity of the orbit of Cosmos 185 rocket, 1967-104B
63
Analysis of the variation in nanohardness of pearlitic steel: Influence of the interplay between ferrite crystal orientation and cementite morphology
64
Analysis of the variation in the permeate flux and of the efficiency of the recovery of mercury by polyelectrolyte enhanced ultrafiltration (PE-UF) Original Research Article
65
Analysis of the variation mechanism in the main energetic parameters in a single-stage vapour compression plant
66
Analysis of the variation regularity of the parameters of the discharge circuit with the distance between workpiece and inductor for electromagnetic forming processes
67
Analysis of the variety of education and outreach interventions in biodiversity conservation projects in Spain
68
Analysis of the vehicle fleet in the Kathmandu Valley for estimation of environment and climate co-benefits of technology intrusions
69
Analysis of the vehicle mix in the passenger-car sector in Japan for CO2 emissions reduction by a MARKAL model
70
Analysis of the Vertebrate Insulator Protein CTCF-Binding Sites in the Human Genome
71
Analysis of the vertices image, image and DDV with light-cone QCD sum rules Original Research Article
72
Analysis of the vesicular structure of basalts
73
Analysis of the vibration characteristics of double-walled carbon nanotubes Original Research Article
74
Analysis of the Vibration Isolation Effect of the Railway Rigid Sandwich Wall
75
Analysis of the vibrational spectra of trans-N,N′-bis-R-salicylidene-1′,2′-cyclohexanediamine
76
Analysis of the vibrational spectra of trans-N,N0-bis-salicylidene-10,20-cyclohexanediamine tautomers
77
Analysis of the vibrational spectra, force fields, and molecular structures of pentacarbonyl(methyl)manganese(I) and pentacarbonyl(methyl)rhenium(I)
78
Analysis of the vibrational spectrum of dihydrazinium 5,5′-azotetrazolate dihydrate by electronic structure calculations
79
Analysis of the vibrational static and dynamic second hyperpolarizabilities of polyacetylene chains
80
Analysis Of The Views of Secondary School Maths Teachers on Model and Modeling
81
Analysis of the Viscoelastoplastic Behavior of Expanded Polystyrene under Compressive Loading: Experiments and Modeling
82
Analysis of the viscous quantum hydrodynamic equations for semiconductors
83
Analysis of the volatile components emitted from cut tobacco processing by gas chromatography/mass spectrometry thermal desorption system
84
Analysis of the volatile components of Argyranthemum adauctum (Link.) Humphries by gas chromatography–mass spectrometry
85
Analysis of the volatile components of Lavandula canariensis (L.) Mill., a Canary Islands endemic species, growing in Australia
86
Analysis of the volatile fraction of “Pesto Genovese” by headspace sorptive extraction (HSSE)
87
Analysis of the volatile profile and identification of odour-active compounds in Bayonne ham
88
Analysis of the Volmer¯Krishtalic mechanism for the chlorine electrode reaction
89
Analysis of the voltage distribution in a motor stator winding subjected to steep-fronted surge voltages by means of a multiconductor lossy transmission line model
90
Analysis of the Voltage Distribution in a Motor Stator Winding Subjected to Steep-Fronted Surge Voltages by Means of a Multiconductor Lossy Transmission Line Model
91
Analysis of the Voltage Swing for Logic and Memory Applications in Si/SiGe Resonant Interband Tunnel Diodes Grown by Molecular Beam Epitaxy
92
Analysis of the volume transition in thermosensitive core-shell particles by synchrotron small-angle X-ray scattering
93
Analysis of the Vulnerability of Pilgrims in Imam Reza s Shrine during the Emergency Evacuation Due to the Crisis using Fuzzy Logic and Interpolation Method
94
Analysis of the WAIS-III Index score scatter using the significant deviation from the mean of the four Index scores
95
Analysis of the wake field effects in the PEP-II storage rings with extremely high currents
96
Analysis of the wake field effects in the PEP-II storage rings with extremely high currents
97
Analysis of the water and thermal management in proton exchange membrane fuel cell systems
98
Analysis of the water column oxic/anoxic interface in the Black and Baltic seas with a numerical model
99
Analysis of the Water Resources Status in Kuwait
100
Analysis of the water supply system of the city of Apamea, using Computational Fluid Dynamics. Hydraulic system in the north-eastern area of the city, in the Byzantine period
101
Analysis of the Water Vapour Sorption Isotherms of Oil palm trunk and Rubberwood
102
Analysis of the water, energy, environmental and socioeconomic reality in selected Mediterranean countries (Cyprus, Turkey, Egypt, Jordan and Morocco) Original Research Article
103
Analysis of the waterjet contact/impact on target material
104
Analysis of the wear characteristics of an EDM electrode made by selective laser sintering
105
Analysis of the Wheeler-DeWitt equation beyond planck scale and dimensional reduction
106
Analysis of the white emission from ion beam synthesised layers by in-depth resolved scanning photoluminescence microscopy
107
Analysis of the Wind Resources in Saharan Atlas of Algeria: Adrar Region as a Case Study
108
Analysis of the Work of Atatürk named “Viewpoints Regarding the Instruction and Education of the Military” in terms of Leadership and Education
109
Analysis of the work-hardening behavior of C–Mn steels deformed under hot-working conditions
110
Analysis of the XENON100 dark matter search data
111
Analysis of the Young equation and use of the Kelvin equation in calculating the Gibbs excess
112
Analysis of the α-synuclein G209A mutation in familial Parkinsonʹs disease
113
Analysis of the β-Glucocerebrosidase Gene in Czech and Slovak Gaucher Patients: Mutation Profile and Description of Six Novel Mutant Alleles
114
Analysis of the β-methylene carbon-13 NMR chemical shifts: from vinylidene chloride copolymers to a general analysis of polymers
115
Analysis of the γ–ɛ–α′ variant selection induced by 10% plastic deformation in 304 stainless steel at −60 °C
116
Analysis of the ν11 band of ethylene-13C2 by high-resolution Fourier transform infrared spectroscopy
117
Analysis of the π-π Stacking Interactions between the Aminoglycoside Antibiotic Kinase APH(3′)-IIIa and Its Nucleotide Ligands Original Research Article
118
Analysis of theaflavins in biological fluids using liquid chromatography–electrospray mass spectrometry
119
Analysis of thein VitroTranslation Product of a Novel-TypeDrosophila melanogasterAldolase mRNA in Which Two Carboxyl-Terminal Exons Remain Unspliced
120
Analysis of Theories of Educational Jurisprudence and International Law Regarding the Cloned Child
121
Analysis of therapeutic effect and safety of target-dose metoprolol in the treatment of patients with diabetes mellitus with chronic heart failure
122
Analysis of therapeutic peptides in human urine by combination of capillary zone electrophoresis–electrospray mass spectrometry with preparative capillary isotachophoresis sample pretreatment
123
Analysis of Thermal Adaptation in the HSL Enzyme Family
124
Analysis of thermal and athermal deformation mechanisms during creep of γ-TiAl alloys
125
Analysis of thermal and athermal deformation mechanisms during creep of γ-TiAl alloys
126
Analysis of thermal and electrical performance of a hybrid (PV/T) air based solar collector for Iraq
127
Analysis of Thermal and Flow Characteristics in a Combined Cross-Flow and Jet-Flow Configuration with Flow-Guiding Fins
128
Analysis of thermal and water management with temperature-dependent diffusion effects in membrane of proton exchange membrane fuel cells
129
Analysis of thermal balance in high-temperature proton exchange membrane fuel cells with short stacks via in situ monitoring with a flexible micro sensor
130
Analysis of thermal behavior during equal channel multi-angular pressing by the 3-dimensional finite volume method
131
Analysis of Thermal Behavior for Beam Blank Continuous Casting Mold Original Research Article
132
Analysis of thermal behavior in multi-layer metal thin films based on hyperbolic two-step model
133
Analysis of thermal comfort and indoor air quality in a mechanically ventilated theatre
134
Analysis of thermal conductivity data in heavy fermion compounds
135
Analysis of thermal contact resistance between polymer and mold in injection molding
136
Analysis of thermal cycles and working fluids for power generation in space
137
Analysis of thermal cycling curves of short fibre reinforced Mg-MMCs
138
Analysis of thermal cycling curves of short fibre reinforced Mg-MMCs
139
Analysis of thermal cycling efficiency and optimal design of heating/cooling systems for rapid heat cycle injection molding process
140
Analysis of Thermal Decay and Prediction of Operational Lifetime for a Type I BoronGermanium Codoped Fiber Bragg Grating
141
Analysis of thermal decomposition behaviors with consecutive reactions by TG
142
Analysis of Thermal Decomposition Kinetics and Calculation of Activation Energy for Degradation of Polyaniline-Graphene Oxide Composites-Synergistic Reinforcement on Thermal Stability
143
Analysis of thermal decomposition products arising from polyvinyl chloride analogs by supersonic jet/multiphoton ionization/mass spectrometry
144
Analysis of thermal degradation kinetics and carbon structure changes of co-pyrolysis between macadamia nut shell and PET using thermogravimetric analysis and 13C solid state nuclear magnetic resonance
145
Analysis of thermal diffusivity by parameter estimation in converging thermal-wave technique
146
Analysis of thermal diffusivity in aluminum (particle)-filled PMMA compounds
147
Analysis of thermal dispersion in an array of parallel plates with fully-developed laminar flow
148
Analysis of thermal distributions in veneered zirconia and metal restorations during firing
149
Analysis of thermal effects in a spherical adsorbent pellet
150
Analysis of thermal effects on the misaligned hydraulic servo cylinder
151
Analysis of thermal emission from the nightside of Venus at 1.51 and 1.55 μm
152
Analysis of Thermal Emission Spectrometer data using spectral EOF and tri-spectral methods
153
Analysis of thermal energy demand and saving in industrial buildings: A case study in Slovakia
154
Analysis of thermal fields in orthogonal machining with infrared imaging
155
Analysis of thermal hysteresis protein hydration using the random network model Original Research Article
156
Analysis of thermal performance and energy savings of membrane based heat recovery ventilator
157
Analysis of thermal performance and optimization of concentric circular fins under dehumidifying conditions
158
Analysis of thermal phenomena in LENS™ deposition
159
Analysis of thermal processes in solidifying casting using the combined variant of the BEM
160
Analysis of thermal properties by scanning thermal microscopy in nanocrystallized iron surface induced by ultrasonic shot peening
161
Analysis of thermal properties by scanning thermal microscopy in nanocrystallized iron surface induced by ultrasonic shot peening
162
Analysis of thermal radiation effects on temperatures in turbine engine thermal barrier coatings
163
Analysis of thermal radiation effects on temperatures in turbine engine thermal barrier coatings
164
Analysis of thermal relaxation process of aerosol particles in a quadrupole cell by photon correlation spectroscopy
165
Analysis of thermal residual stress in plastic injection molding
166
Analysis of thermal response of a food self-heating system
167
Analysis of thermal stratification in the upper plenum of the “Monju” reactor
168
Analysis of thermal stress evolution in the steam drum during start-up of a heat recovery steam generator
169
Analysis of thermal stress in magnetron sputtered TiN coating by finite element method
170
ANALYSIS OF THERMAL STRESSES AT DISSIMILAR METAL PIPE WELDS
171
ANALYSIS OF THERMAL STRESSES AT DISSIMILAR METAL PIPE WELDS
172
Analysis of thermal treatment effects upon optico-luminescent and scintillation characteristics of oxide and chalcogenide crystals
173
Analysis of thermal treatment effects upon optico-luminescent and scintillation characteristics of oxide and chalcogenide crystals
174
Analysis of Thermal-Bending Stresses in a Simply Supported Annular Sector Plate
175
Analysis of thermal–hydrologic–mechanical behavior near an emplacement drift at Yucca Mountain
176
Analysis of thermal-induced dentinal fluid flow and its implications in dental thermal pain
177
Analysis of thermally aged adhesion specimen between precured and uncured rubber sheets
178
Analysis of thermally developing flow in porous media under local thermal non-equilibrium conditions
179
Analysis of Thermally Driven Ventilation in Tunnel Greenhouses using Small Scale Models
180
Analysis of thermally induced cylindrical flexure of laminated plates with piezoelectric layers
181
Analysis of thermally induced multistable composites
182
Analysis of thermally stimulated current and effect of rubbery annealing around glass-rubber transition temperature in polyethylene terephthalate
183
Analysis of thermally treated silica gel using Fourier transform ion cyclotron resonance mass spectrometry
184
Analysis of thermal-probe measurements using an iterative method to give sample conductivity and diffusivity data
185
Analysis of thermionic emission from electrodeposited Ni–Si Schottky barriers
186
Analysis of thermodynamic identities for materials under extreme compression
187
Analysis of thermodynamic non-ideality in terms of protein solvation Original Research Article
188
Analysis of thermodynamic processes involving hydrogen
189
Analysis of thermoelastic behaviour of MgO at high temperatures and high pressures Original Research Article
190
Analysis of thermoelastic characteristics for vertical-cracked thermal barrier coatings through mathematical approaches
191
Analysis of thermoelastic constants of solids and minerals at high temperatures Original Research Article
192
Analysis of Thermoelastic Crack Problems Using Green-Lindsay Theory
193
Analysis of thermoelastic damping in microresonators by considering the stretching effect
194
Analysis of thermoelastic damping in microresonators by considering the stretching effect
195
Analysis of thermo-elastic plates based on Reissner’s mixed variational theorem
196
Analysis of Thermoelastic Waves in Functionally Graded Hollow Spheres Based on the Green-Lindsay Theory
197
Analysis of thermoelectric cooler performance for high power electronic packages
198
Analysis of thermoelectric energy conversion efficiency with linear and nonlinear temperature dependence in material properties
199
Analysis of thermograms for the estimation of dimensions of cracks in building envelope
200
Analysis of thermohydrologic behavior for above-boiling and below-boiling thermal-operating modes for a repository at Yucca Mountain
201
Analysis of thermo–hydro–mechanical process in the engineered barrier system of a high-level waste repository Original Research Article
202
Analysis of thermo-mechanical cracking in refractory coatings using variable pulse-duration laser pulse heating
203
Analysis of Thermomechanical Fatigue by using Finite Element Post-pro
204
Analysis of thermomechanical interactions and properties of ceramic breeder blankets
205
Analysis of thermo-mechanical process occurred in magnesium alloy AZ31 sheet during differential speed rolling
206
Analysis of thermoviscoelastic frictionless contact of layered bodies
207
Analysis of thermo-visco-plastic behaviour of six high strength steels
208
Analysis of thiabendazole and procymidone in fruits and vegetables by capillary electrophoresis–electrospray mass spectrometry
209
Analysis of thick functionally graded plates by using higher-order shear and normal deformable plate theory and MLPG method with radial basis functions
210
Analysis of thick isotropic and cross-ply laminated plates by radial basis functions and a Unified Formulation
211
Analysis of Thick Laminated Composite Plates on an Elastic Foundation with the Use of Various Plate Theories
212
Analysis of thick orthotropic laminated composite plates based on higher order shear deformation theory
213
Analysis of thick plates by the natural radial element method
214
Analysis of thick plates by the natural radial element method
215
Analysis of thick plates by using a higher-order shear and normal deformable plate theory and MLPG method with radial basis functions Original Research Article
216
Analysis of thick sandwich construction by a {3,2}-order theory
217
Analysis of thick walled composite pipes with metal liner subjected to simultaneous matrix cracking and plastic flow
218
Analysis of thickness dependence of the sensitivity in thin film resistive gas sensors
219
Analysis of thickness distribution of square-sectional hydroformed parts
220
Analysis of thickness locking in classical, refined and mixed multilayered plate theories
221
Analysis of thickness locking in classical, refined and mixed theories for layered shells
222
Analysis of thickness profiles of pulsed laser deposited metal films
223
Analysis of thickness profiles of pulsed laser deposited metal films
224
Analysis of thin beams, using the meshless local Petrov-Galerkin method, with generalized moving least squares interpolations
225
Analysis of thin coatings of nonlinear diffraction gratings
226
Analysis of thin film growth using finite element method
227
Analysis of thin film surface barrier solar cells with a microrelief interface
228
Analysis of thin film thickness determination in two-phase flow using a multifiber optical sensor
229
Analysis of Thin Isotropic Rectangular and Circular Plates with Multiquadrics
230
Analysis of thin piezoelectric solids by the boundary element method Original Research Article
231
Analysis of thin plates by a combination of isogeometric analysis and the Lagrange multiplier approach
232
Analysis of thin plates by the element-free Galerkin method
233
Analysis of thin plates by the local boundary integral equation (LBIE) method
234
Analysis of thin shells by the Element-Free Galerkin method
235
Analysis of thin shells using anisotropic polyconvex energy densities Original Research Article
236
ANALYSIS OF THIN WALLED TUBE AL 3003 H12 UNDER QUASI-STATIC AXIAL CRUSH MODE USING FINITE ELEMENT METHOD
237
Analysis of thin-film lithium batteries with cathodes of 50 nm to 4 μm thick LiCoO2
238
Analysis of thin-film silicon solar cells with plasma textured front surface and multi-layer porous silicon back reflector
239
Analysis of thinning at the transition corner in tube hydroforming
240
Analysis of thin-walled composite box beam under torsional load without external restraint
241
Analysis of thin-walled curved box beam under in-plane flexure
242
Analysis of thin-walled steel RHS columns filled with concrete under long-term sustained loads
243
Analysis of thin-walled structural elements via 3D standard BEM with generic substructuring
244
Analysis of thiocyanate in biological fluids by capillary zone electrophoresis
245
Analysis of thiols
246
Analysis of third-order intermodulation distortion in common-emitter BJT and HBT amplifiers
247
Analysis of third-party warehousing contracts with commitments
248
Analysis of threats to South American flora and its implications for conservation
249
Analysis of three- and four-way data using multivariate curve resolution-alternating least squares with global multi-way kinetic fitting
250
Analysis of three hundred fifteen ectopic pregnancies treated with single-dose methotrexate
251
Analysis of three hybrid systems in timed μCRL
252
Analysis of three level supply chain of inventory with deterioration for multi-items
253
Analysis of three LOCAs for the European HCPB test blanket system
254
Analysis of three nonlinear effects in a continuum approach to heat transport in nanosystems
255
Analysis of three years of boundary layer observations over the Gulf of Mexico and its shores
256
ANALYSIS OF THREE-DIMENSIONAL CONSOLIDATIONOF UNSATURATED SOILS
257
Analysis of three-dimensional crack initiation and propagation using the extended finite element method
258
Analysis of three-dimensional effects in oscillating cantilevers immersed in viscous fluids
259
Analysis of three-dimensional flow in a cylindrical sediment oxygen demand chamber
260
Analysis of three-dimensional fracture mechanics problems: A non-intrusive approach using a generalized finite element method
261
Analysis of three-dimensional heat and fluid flow induced by piezoelectric fan
262
Analysis of three-dimensional heat transfer in micro-channel heat sinks
263
Analysis of three-dimensional interface cracks using enriched finite elements
264
Analysis of three-dimensional microarchitecture and degree of mineralization in bone metastases from prostate cancer using synchrotron microcomputed tomography
265
Analysis of three-dimensional micro-mechanical strain formulations for granular materials: Evaluation of accuracy
266
Analysis of three-dimensional natural convection of nanofluids by BEM
267
ANALYSIS OF THREE-DIMENSIONAL TRANSIENT ACOUSTIC WAVE PROPAGATION USING THE BOUNDARY INTEGRAL EQUATION METHOD
268
Analysis of three-phase rectifiers with constant-voltage loads
269
Analysis of Three-Year Death Records of Hacettepe University Adult Hospital
270
Analysis of threshold-based batch-service queueing systems with batch arrivals and general service times
271
Analysis of thrust force in a work roll shifting mill
272
Analysis of thrust force in a work roll shifting mill
273
Analysis of thrust shear zones in curve-shaped belts: Deformation mode and timing of the Olevano-Antrodoco-Sibillini thrust (Central/Northern Apennines of Italy)
274
Analysis of thunderstorm and lightning activity associated with sprites observed during the EuroSprite campaigns: Two case studies
275
Analysis of thunderstorms in Bangladesh using ARIMA model
276
Analysis of thyreostatic drugs in thyroid samples by liquid chromatography tandem mass spectrometry: Comparison of two sample treatment strategies
277
Analysis of thyreostatic drugs in thyroid samples by Ultra-Performance Liquid Chromatography tandem mass spectrometry detection Original Research Article
278
Analysis of thyreostats: A history of 35 years Review Article
279
Analysis of thyroid hormones in raw and treated waste water
280
Analysis of tidal signals in surface displacement measured by a dense continuous GPS array
281
Analysis of timber-framed wall elements with openings
282
Analysis of time delay model for drug therapy on HIV dynamics
283
Analysis of time harmonic wave propagation in an elastic layer under heavy fluid loading
284
Analysis of time reduction methods for magnetic resonance elastography of the brain
285
Analysis of time resolution in a dual head PET system using low pass filter interpolation and digital constant fraction discriminator techniques
286
Analysis of time resolution in a dual head PET system using low pass filter interpolation and digital constant fraction discriminator techniques
287
Analysis of time series data on agroecosystem vegetation using predictive clustering trees
288
Analysis of time series data on agroecosystem vegetation using predictive clustering trees
289
Analysis of time series for non-invasive characterization of blood components and circulation patterns
290
Analysis of time-course gene expression profiles of a periodontal ligament tissue model under compression
291
Analysis of time-dependent conjugation of gold nanoparticles with an antiparkinsonian molecule by using curve resolution methods Original Research Article
292
Analysis of time-resolved interaction force mode AFM imaging using active and passive probes
293
Analysis of time-resolved interaction force mode AFM imaging using active and passive probes
294
Analysis of time-scaling properties in forest-fire sequence observed in Italy
295
Analysis of time-scaling properties in forest-fire sequence observed in Italy
296
Analysis of time-series MODIS 250 m vegetation index data for crop classification in the U.S. Central Great Plains
297
Analysis of Time–Varying Mesh Stiffness for the Planetary Gear System with Analytical and Finite Element Methods
298
Analysis of time-varying rolling element bearing characteristics
299
Analysis of time-varying wind-induced currents in the North Channel of the Irish Sea, using empirical orthogonal functions and harmonic decomposition
300
Analysis of timing performance for an APD-LSO scintillation detector
301
Analysis of timing performance for an APD-LSO scintillation detector
302
Analysis of tin behaviour on surface of rapidly solidified aluminium alloy powder particles during heating
303
Analysis of tin in lead oxide by Mössbauer spectrometry and transmission electron microscopy
304
Analysis of tin whisker growth on lead-free alloys with Ni presence under thermal shock stress
305
Analysis of Ti–Ni–Hf shape memory alloys by combinatorial nanocalorimetry Original Research Article
306
Analysis of TiO2 photocatalysis in a pulsed discharge system for phenol degradation
307
Analysis of tissue invasiveness of adherent strains of Listeria monocytogenes by in vivo mouse assay
308
Analysis of Titan CH4 3.3 μm upper atmospheric emission as measured by Cassini/VIMS
309
Analysis of Titan tholin pyrolysis products by comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry
310
Analysis of Titanʹs neutral upper atmosphere from Cassini Ion Neutral Mass Spectrometer measurements
311
Analysis of TLD-100 Calibration and Correction Factor in Different Field Sizes Under Low Dose Conditions Irradiated with Two Systems: Gamma Knife 4C and Theratron 780-C
312
Analysis of Tlr4-Mediated LPS Signal Transduction in Macrophages by Mutational Modification of the Receptor
313
Analysis of Tlr4-Mediated LPS Signal Transduction in Macrophages by Mutational Modification of the Receptor: Volume 25, Number 6 (1999), pages 328–338 (doi:10.1006/bcmd.1999.0262)
314
Analysis of TLR7, SOCS1 and ISG15 immune genes expression in the peripheral blood of responder and non-responder patients with chronic Hepatitis C
315
Analysis of TNF alpha and Interlukin-1β genes in Oreochromis niloticus: inflammatory responses induced by Myxobolus spp. and Trichodina spp.
316
Analysis of Tobacco-Specific Nitrosamines in the Common Smokeless Tobacco Afzal in Oman
317
Analysis of tobacco-specific N-nitrosamines in snuff by ethyl acetate extraction and liquid chromatography–tandem mass spectrometry
318
Analysis of TOF-SIMS spectra from fullerene compounds
319
Analysis of Tolerance Indices in Some Rice (Oryza sativa L.) Genotypes at Salt Stress Condition
320
Analysis of Toll-like receptor 2 of antarctic teleosts
321
Analysis of Toluene: Removal of toluene from the air s tream using a bed made of metal-organic frameworks adsorbent
322
Analysis of tomato taste using two types of electronic tongues
323
Analysis of tomographic mineralogical data using YaDiV—Overview and practical case study
324
Analysis of tongue and groove joints for thick laminates
325
Analysis of Tool and Workpiece Interaction in Diamond Turning Using Graphical Analysis of Acoustic Emission
326
Analysis of tool sharing in an FMS: A simulation study
327
Analysis of tool wear patterns in finishing turning of Inconel 718
328
Analysis of topographic and climatic control on rainfall-triggered shallow landsliding using a quasi-dynamic wetness index
329
ANALYSIS OF TOPOLOGICAL DERIVATIVE FUNCTION FOR A FAST ELECTROMAGNETIC IMAGING OF PERFECTLY CONDUCING CRACKS
330
Analysis of topological properties in a seismic network
331
Analysis of torque developed in axial flux, single-phase brushless DC motor with salient-pole stator
332
Analysis of torsional deformation by rigid-plastic finite element method using recurrent boundary conditions
333
Analysis of torsion-rotational transitions in the first three torsional states of CH3OD Original Research Article
334
Analysis of total aerobic viable counts in samples of raw meat using fluorescence-based probe and oxygen consumption assay
335
Analysis of total and dissolved heavy metals in surface water of a Mexican polluted river by total reflection X-ray fluorescence spectrometry
336
Analysis of total and organic carbon and total nitrogen in settling oceanic particles and a marine sediment: an interlaboratory comparison
337
Analysis of total dissolved mercury in waters after on-line preconcentration on an active gold column
338
Analysis of total energy system based on solid oxide fuel cell for combined cooling and power applications
339
Analysis of total factor productivity growth of sugar beet in Iran using Malmquist approach
340
Analysis of total inositol phosphates in municipal solid waste compost-treated soils by two extraction methods
341
Analysis of total phenol, flavonoid, and chlorogenic acid content of robusta coffee leaves extract using nades (natural deep eutectic solvent)
342
Analysis of total phenolic, flavonoids, anthocyanins and tannins content in Romanian red wines: Prediction of antioxidant activities and classification of wines using artificial neural networks
343
Analysis of total polyphenols in wines by FIA with highly stable amperometric detection using carbon nanotube-modified electrodes
344
Analysis of total propionic acid in feed using headspace solid-phase microextraction and gas chromatography
345
Analysis of total visual and CCD V-broadband observations of Comet C/1995 O1 (Hale-Bopp): 1995–2001 Original Research Article
346
Analysis of tour values to develop enablers using an interpretive hierarchy-based model in Taiwan
347
Analysis of Tourism Effects on Economic, Socio-Cultural and Environmental Development of Astara City Using Chi-square Model
348
Analysis of tourism trends in Spain
349
Analysis of tourist behaviour based on the tracking data collected using a mobile communication instrument
350
Analysis of Tourist Cluster in Mazandaran Using SWOT Approach
351
Analysis of tow deformations in textile preforms subjected to forming forces
352
Analysis of toxicity tests on Daphnia survival and reproduction
353
Analysis of toxicity tests on fish growth
354
Analysis of toxicological risks from local contamination by PCDDs and PCDFs: Importance of isomer distributions and toxic equivalents
355
Analysis of TP53 codon 72 polymorphism in HPV-positive and HPV-negative penile carcinoma
356
Analysis of TP53 Codon 72 Polymorphism in Mucinous and Non-Mucinous Colorectal Adenocarcinoma in Isfahan, Iran
357
Analysis of TP53 gene mutations in human lung cancer: Comparison of capillary electrophoresis single strand conformation polymorphism assay with denaturing gradient gel electrophoresis and direct sequencing
358
Analysis of Tproduction in K +- Xe collisions
359
Analysis of TQM Implementations in the Floor Tiles Industry
360
Analysis of trabecular microarchitecture of human iliac bone using microcomputed tomography in patients with hip arthrosis with or without vertebral fracture
361
Analysis of trace amino acid neurotransmitters in hypothalamus of rats after exhausting exercise using microdialysis
362
Analysis of trace amounts of alkenones in complex environmental samples by way of NaBH4/NaBD4 reduction and silylation
363
Analysis of trace amounts of carbon dioxide, oxygen and carbon monoxide in nitrogen using dual capillary columns and a pulsed discharge helium ionisation detector
364
Analysis of trace components in synthesis gas generated by black liquor gasification
365
Analysis of trace contaminants in hot gas streams using time-weighted average solid-phase microextraction: Proof of concept
366
Analysis of trace contamination of phthalate esters in ultrapure water using a modified solid-phase extraction procedure and automated thermal desorption–gas chromatography/mass spectrometry
367
Analysis of trace elements in human hair through X-ray fluorescence spectroscopy for screening of prostate cancer
368
Analysis of trace elements in multifloral Argentine honeys and their classification according to provenance
369
Analysis of trace elements in scalp hair of healthy people, hyperplasia and breast cancer patients with XRF method
370
Analysis of trace elements in scalp hair of healthy people, hyperplasia and breast cancer patients with XRF method
371
Analysis of Trace Elements in Teeth by ICP-MS: Implications for Caries
372
Analysis of trace elements responsible for antioxidant protection by SRXFA method
373
Analysis of trace elements responsible for antioxidant protection by SRXFA method
374
Analysis of trace impurities in hydrogen: Enrichment of impurities using a H2 selective permeation membrane
375
Analysis of trace level peptides using capillary electrophoresis with UV laser-induced fluorescence
376
Analysis of trace levels of domoic acid in seawater and plankton by liquid chromatography without derivatization, using UV or mass spectrometry detection
377
Analysis of trace levels of sulfonamides in surface water and soil samples by liquid chromatography-fluorescence
378
Analysis of trace metals (Cu, Cd, Pb, and Fe) in seawater using single batch nitrilotriacetate resin extraction and isotope dilution inductively coupled plasma mass spectrometry Original Research Article
379
Analysis of trace residual 1,3-butadiene in poly(acrylonitrile-co-butadiene-co-styrene)
380
Analysis of tracer particle migration in inhomogeneous turbulence
381
Analysis of tracer test data, and injection-induced cooling, in the Laugaland geothermal field, N-Iceland
382
Analysis of tracer tests with simple spreadsheet models
383
Analysis of tracer tomography using temporal moments of tracer breakthrough curves
384
Analysis of tracer transit in rat brain after carotid artery and femoral vein administrations using linear system theory
385
Analysis of tracheostomy-associated morbidity after operations for head and neck cancer
386
Analysis of traditional poultry trader networks to improve risk-based surveillance
387
Analysis of Traditional Suspension Strings With GTACSR Conductors
388
Analysis of Traditional Symbolics in The Tatar Poetry in the 1930s: Nominative Meanings and Functions: The Case Study of Tatar Language
389
Analysis of traffic accident severity using Decision Rules via Decision Trees
390
Analysis of traffic accidents at urban intersections in Riyadh
391
Analysis of traffic injury severity: An application of non-parametric classification tree techniques
392
Analysis of traffic-induced vibrations by blind source separation with application in building monitoring Original Research Article
393
Analysis of Traffic-Induced Vibrations in a Cable-Stayed Bridge. Part I: Experimental Assessment
394
Analysis of Traffic-Induced Vibrations in a Cable-Stayed Bridge. Part II: Numerical Modeling and Stochastic Simulation
395
Analysis of traffic-related NOx and EC concentrations at various distances from major roads in Japan
396
Analysis of Training Needs of Mothers on Exclusive Breastfeeding; a Study in Health Care Centers
397
Analysis of trans fatty acids in deep frying oils by three different approaches
398
Analysis of trans–cis fatty acids in fatty acid steryl esters isolated from soybean oil deodoriser distillate
399
Analysis of transcript and metabolite levels in Italian rice (Oryza sativa L.) cultivars subjected to osmotic stress or benzothiadiazole treatment
400
Analysis of transcription factors in thymic and CD34+ progenitor-derived plasmacytoid and myeloid dendritic cells: evidence for distinct expression profiles
401
Analysis of transcriptome characteristics of UTI therapy for cerebral injury after CA/ROSC based on RNA-seq technique
402
Analysis of transcripts and proteins expressed in the salivary glands of Hessian fly (Mayetiola destructor) larvae
403
Analysis of transfer procedures in elastoplasticity based on the error in the constitutive equations: Theory and numerical illustration
404
Analysis of transferred Earth potentials in grounding systems: a BEM numerical approach
405
Analysis of transferred keratinocyte-like cells derived from mouse embryonic stem cells on experimental surgical skin wounds of mouse
406
Analysis of transformation stasis during the isothermal bainitic ferrite formation in Fe–C–Mn and Fe–C–Mn–Si alloys Original Research Article
407
Analysis of transformer inrush transients in offshore electrical systems
408
Analysis of transformer leakage inductance and overlap effects in the series-parallel resonant converter
409
Analysis of Transforming Growth Factor- B1 Expression in Resorptive Lacunae following Orthodontic Tooth Movement in An Animal Model
410
Analysis of transgenic citrus (Citrus aurantium L.) plants expressing Citrus Tristeza Virus coat protein gene
411
Analysis of transient ash pneumatic conveying over long distance and prediction of transport capacity
412
Analysis of transient average tool temperatures in face milling
413
ANALYSIS OF TRANSIENT ELECTROMAGNETIC SCATTERING USING THE MULTILEVEL TIME DOMAIN FAST DIPOLE METHOD
414
ANALYSIS OF TRANSIENT ELECTROMAGNETIC SCATTERING USING TIME DOMAIN FAST DIPOLE METHOD
415
ANALYSIS OF TRANSIENT ELECTROMAGNETIC SCATTERING WITH PLANE WAVE INCIDENCE USING MOD-FDM
416
ANALYSIS OF TRANSIENT EVENTS WITHOUT SCRAM IN A RESEARCH REACTOR USING THE RELAP5/MOD3.2 COMPUTER CODE
417
Analysis of transient flow in pipelines with fluid-structure interaction using method of lines
418
Analysis of Transient Flow in the Case of Secondary Injection for Transient Vector Control (RESEARCH NOTE)
419
Analysis of transient heat conduction with phase changes by a boundary integral equation method Original Research Article
420
Analysis of Transient Heat Transfer in Straight Fins of Various Shapes with Its Base Subjected to a Constant Heat Flux
421
Analysis of transient mechanical loss due to thermal stresses in metal matrix composites
422
Analysis of Transient Modes of Peltier Thermoelectric Elements under Various Input Influences
423
Analysis of transient of the datagram traffic for a demand assignment TDMA satellite access scheme
424
Analysis of transient permeation as a technique for determination of sorption and diffusion in supported membranes
425
Analysis of transient response of a unit proton-exchange membrane fuel cell with a degraded gas diffusion layer
426
Analysis of transient response of saturated porous elastic soil under cyclic loading using element-free Galerkin method
427
Analysis of transient response of single quartz crystal nanobalance for determination of volatile organic compounds
428
Analysis of Transient RivlinEricksen Fluid and Irreversibility of Exothermic Reactive Hydromagnetic Variable Viscosity
429
ANALYSIS OF TRANSIENT THERMAL BENDING MOMENTS AND STRESSES OF THE WORKPIECE DURING SURFACE GRINDING
430
Analysis of transient vibrations on complex targets representing elementary configurations of GOCE satellite
431
Analysis of Transient-Grating Signals for Reacting-Flow Applications
432
Analysis of transitional locomotor tasks in patient with mild PD
433
Analysis of Transitional Process from Chalcolithic to Bronze Age in Balageriveh, Lorestan, Iran
434
Analysis of Translation Linguistics Units of Women’s Language Features in the Novel Paper Towns
435
Analysis of Translation of Audiovisual Humor in Iranian Series
436
Analysis of Translation Strategies Employed in Awards-winning Subtitled Dramas
437
Analysis of translational positioning of unit loads by directionally-oriented friction force fields
438
Analysis of Transmembrane Helix Integration in the Endoplasmic Reticulum in S. cerevisiae
439
Analysis of transmission lines with frequency-dependent parameters by wavelet-FFT method
440
ANALYSIS OF TRANSMISSION OF A SIGNAL THROUGH A COMPLEX CYLINDRICAL/COAXIAL CAVITY BY TRANSMISSION LINE METHODS
441
ANALYSIS OF TRANSMISSION PROPERTIES IN A PHOTONIC QUANTUM WELL CONTAINING SUPERCONDUCTING MATERIALS
442
Analysis of transmission spectra for large ratio of emission-to-absorber linewidths: extension of differential absorption lidar analysis for finite laser linewidths
443
Analysis of Transmission Towers with Different Configurations
444
Analysis of transmit-receive diversity in Rayleigh fading
445
Analysis of transmittance of nanostructured alumina films
446
Analysis of transpiration results from the RICE and PILPS workshop
447
Analysis of transport costs for energy crops for use in biomass pyrolysis plant networks
448
Analysis of transport patterns during an SCOS97-NARSTO episode
449
Analysis of transport phenomena in yttrium-doped zirconia in an oxygen chemical potential gradient and in short-circuit condition—Reply to the discussion from G. Petot-Ervas and C. Petot
450
Analysis of transport phenomena with finite speed of perturbations propagation
451
Analysis of transport phenomena within PEM fuel cells – An analytical solution
452
Analysis of transport properties determined by Langevin dynamics using Green–Kubo formulae
453
Analysis of transpressional deformation from geometrical evolution of mesoscopic structures from Phulad shear zone, Rajasthan, India
454
Analysis of trans-Resveratrol by Laser Desorption Coupled with Resonant Ionization Spectrometry. Application to trans-Resveratrol Content in Vine Leaves and Grape Skin
455
Analysis of trans-resveratrol by laser ionization mass spectrometry and HPLC with fluorescence detection: Comparison between both techniques
456
Analysis of trans-resveratrol: Comparison of methods and contents in Muscatel fortified wines from Setْbal region in Portugal
457
Analysis of trans-resveratrol: Comparison of methods and contents in Muscatel fortified wines from Setْbal region in Portugal
458
Analysis of transverse cracking and stiffness loss in cross-ply laminates with hygrothermal conditions
459
Analysis of transverse heat transfer coefficient in CICC’s with central cooling channel Original Research Article
460
Analysis of transverse loading for laminated cylindrical pipes
461
Analysis of transverse mixing in natural streams under slug tests
462
Analysis of transverse momentum correlations in hadronic Z decays
463
Analysis of transverse runout in rotating flexible disks by using Galerkin’s method
464
Analysis of transverse runout in rotating flexible disks by using Galerkin’s method
465
Analysis of transverse runout in rotating flexible disks by using Galerkin’s method
466
Analysis of trap spectra in LEC and epitaxial GaAs
467
Analysis of trap spectra in LEC and epitaxial GaAs
468
Analysis of trapped entanglements in polymer networks
469
Analysis of trapping and detrapping in semi-insulating GaAs detectors
470
Analysis of trapping and detrapping in semi-insulating GaAs detectors
471
Analysis of trapping effects on charge transfer in proton irradiated pn-CCDs
472
Analysis of trapping effects on charge transfer in proton irradiated pn-CCDs
473
Analysis of travel mode and departure time choice for urban shopping trips
474
Analysis of Travel Time Distribution for Varying Length of Time Interval
475
Analysis of treatment response data from eligibility designs
476
Analysis of treatment response data without the joint distribution of potential outcomes
477
Analysis of tree rings using inductively coupled plasma mass spectrometry to record fluctuations in a metal pollution episode Original Research Article
478
Analysis of trenbolone acetate metabolites and melengestrol in environmental matrices using gas chromatography–tandem mass spectrometry
479
Analysis of Trend and Sources of Government Budget Deficit Financing in Bangladesh
480
Analysis of trends in aviation maintenance risk: An empirical approach
481
Analysis of trends in aviation maintenance risk: An empirical approach
482
Analysis of trends in birth outcomes and fertility measures in the rural population of east Azerbaijan province, Iran: 2001 - 2013
483
Analysis of trends in coronary artery bypass grafting and percutaneous coronary intervention rates in Washington state from 1987 to 2001
484
Analysis of trends in technical and allocative efficiency: An application to Texas public school districts
485
Analysis of trends in temperature data in arid and semi-arid regions of Iran
486
Analysis of trends in the Sahelian ‘rain-use efficiency’ using GIMMS NDVI, RFE and GPCP rainfall data
487
Analysis of trends in tropospheric ozone in the Lower Fraser Valley, British Columbia
488
Analysis of triacylglycerol and fatty acid isomers by low-temperature silver-ion high performance liquid chromatography with acetonitrile in hexane as solvent: Limitations of the methodology
489
Analysis of triacylglycerol positional isomers in food products as brominated derivatives by high-performance liquid chromatography coupled with a flame ionization detection
490
Analysis of triacylglycerols in fat body of bumblebees by chromatographic methods
491
Analysis of triacylglycerols on porous graphitic carbon by high temperature liquid chromatography
492
Analysis of triazine herbicides using an up-and-down-shaker-assisted dispersive liquid–liquid microextraction coupled with gas chromatography–mass spectrometry
493
Analysis of triazine in water samples by solid-phase microextraction coupled with high-performance liquid chromatography
494
Analysis of triazolopyrimidine herbicides in soils using field-enhanced sample injection-coelectroosmotic capillary electrophoresis combined with solid-phase extraction
495
Analysis of tribological feature of the oxide scale in hot strip rolling
496
Analysis of tribological properties of steel sliding elements with two-component surface layer in lubricated contact
497
Analysis of triclosan and triclocarban in human nails using isotopic dilution liquid chromatography–tandem mass spectrometry
498
Analysis of triethanolamine in trass cement pastes by voltammetric methods
499
Analysis of trifluoroacetic acid and other short-chain perfluorinated acids (C2–C4) in precipitation by liquid chromatography–tandem mass spectrometry: Comparison to patterns of long-chain perfluorinated acids (C5–C18) Original Research Article
500
Analysis of triglyceride isomers by silver-ion high-performance liquid chromatography: Effect of column temperature on retention times
501
Analysis of trigonometric implicit Runge–Kutta methods
502
Analysis of trihalomethanes in drinking water using headspace-SPME technique with gas chromatography
503
Analysis of trimethoprim, lincomycin, sulfadoxin and tylosin in swine manure using laser diode thermal desorption-atmospheric pressure chemical ionization-tandem mass spectrometry
504
Analysis of triorganotin compounds in water samples by hydrophilic interaction liquid chromatography–electrospray ionization-mass spectrometry
505
Analysis of triple-label samples by liquid scintillation spectrometry
506
Analysis of tritium behaviour and recovery from a water-cooled Pb17Li blanket
507
Analysis of tritium extraction from liquid lithium by permeation window and solid gettering processes
508
Analysis of tritium kinetics of SIBELIUS beryllium
509
Analysis of tritium permeation in the steam generators of the SEAFP/SEAL fusion power reactor
510
Analysis of tritium transport in irradiated beryllium
511
Analysis of tropane and related alkaloids
512
Analysis of trophic networks and carbon flows in south-eastern Baltic coastal ecosystems
513
Analysis of tropospheric NOx over Asia using the model of atmospheric transport and chemistry (MATCH-MPIC) and GOME-satellite observations
514
Analysis of true jitter arising from pulse-stuffing schemes
515
Analysis of truncation limit in probabilistic safety assessment
516
Analysis of truncation limit in probabilistic safety assessment
517
Analysis of truss structures using distributed object-oriented methods
518
Analysis of trust and social participation network among activists of sericulture in Guilan Province, Northwestern Iran and sustainable development in sericulture industry using Ucinet software
519
Analysis of tryptophan and tyrosine in cerebrospinal fluid by capillary electrophoresis and “ball lens” UV-pulsed laser-induced fluorescence detection
520
Analysis of tryptophan at nmol l−1 level based on the fluorescence enhancement of terbium–gadolinium–tryptophan–sodium dodecyl benzene sulfonate system
521
Analysis of tryptophan hydroxylase I and II mRNA expression in the human brain: A post-mortem study
522
Analysis of tryptophan oxidation by fluorescence spectroscopy: Effect of metal-catalyzed oxidation and selected phenolic compounds
523
Analysis of TSC spectra measured on silicon pad detectors after exposure to fast neutrons
524
Analysis of TSC spectra measured on silicon pad detectors after exposure to fast neutrons
525
Analysis of tube hydroforming in a square cross-sectional die
526
Analysis of tubular adhesive joints with a functionally modulus graded bondline subjected to axial loads
527
Analysis of tumor as an inverse problem provides a novel theoretical framework for understanding tumor biology and therapy Original Research Article
528
Analysis of tumor necrosis factor-α, transforming growth factor-β1, interleukin-10, and interferon-γ polymorphisms in patients with alcoholic chronic pancreatitis
529
Analysis of tungsten and titanium migration during ESD contact burnout
530
Analysis of tungsten carbide coatings by infrared laser-induced argon spark with inductively coupled plasma atomic emission spectrometry
531
Analysis of tungsten carbide coatings by UV laser ablation inductively coupled plasma atomic emission spectrometry
532
Analysis of Tunnel and Super Structures for Excavation
533
Analysis of turbine blade breakages in an engine starting motor
534
Analysis of turbulence by statistics based on generalized entropies
535
Analysis of turbulence models for thermohydraulic calculations of helium cooled fusion reactor components
536
Analysis of turbulent combustion in inert porous media
537
Analysis of turbulent flow and heat transfer over a double forward facing step with obstacles
538
Analysis of turbulent flow in channels roughened by two-dimensional ribs and three-dimensional blocks. Part I: Resistance
539
Analysis of turbulent flow in channels roughened by two-dimensional ribs and three-dimensional blocks. Part II: Heat transfer
540
Analysis of turbulent flow in silicon melts by optical temperature measurement
541
ANALYSIS OF TURBULENT FLOW IN THE IMPELLER OF A CHEMICAL PUMP
542
Analysis of Turbulent Natural Convection by an Elliptic Relaxation Model in Tall Vertical Cavities with Linear Temperatures on Sidewalls
543
Analysis of turbulent near-wake development behind an infinitely yawed flat plate
544
ANALYSIS OF TURBULENT SIMPLE SHEAR FLOWS OF TWO-PHASE MIXTURES
545
Analysis of Tween based microemulsion in the presence of TB drug rifampicin
546
Analysis of twenty five impurities in uranium matrix by ICP-MS with iron measurement optimized by using reaction collision cell, cold plasma or medium resolution
547
Analysis of twenty years of categorical land transitions in the Lower Hunter of New South Wales, Australia
548
Analysis of twin boundaries using the electron backscatter diffraction (EBSD) technique
549
Analysis of twinning behavior of pure Ti compressed at different strain rates by Schmid factor
550
Analysis of Twin-Nozzle-Scanning Spray Forming Process and Spray Formed High Speed Steel (HSS) Original Research Article
551
Analysis of twist stiffness of single and double-wall corrugated boards
552
Analysis of Two Additional Signaling Molecules in Streptomyces coelicolor and the Development of a Butyrolactone-Specific Reporter System Original Research Article
553
Analysis of two biochars and one hydrochar from different feedstock: focus set on environmental, nutritional and horticultural considerations
554
Analysis of Two CDKN2BAS Polymorphisms in Relation to Coronary Artery Disease Patients in North of Iran
555
Analysis of two Chebyshev-like third order methods free from second derivatives for solving systems of nonlinear equations
556
Analysis of two colliding laser-produced plasmas by emission spectroscopy and fast photography
557
Analysis of two colliding laser-produced plasmas by emission spectroscopy and fast photography
558
Analysis of two competing TCP/IP connections
559
Analysis of Two Different DOA Algorithms for the Estimation of Desired Signal Using Smart Antenna Technology
560
Analysis of two dissimilar functionally graded strips containing interface crack under plane deformation
561
Analysis of two dow corningbreast implants removed after 28 years of implantation
562
Analysis of two frequency harmonic undulator radiation and gain
563
Analysis of two frequency harmonic undulator radiation and gain
564
Analysis of two frictional viscoplastic contact problems with damage
565
Analysis of two groups of plane infantry targets as sets of geometric primitives
566
Analysis of two methods of measurement of surface potential of insulators in SEM: electron spectroscopy and X-ray spectroscopy methods
567
Analysis of two parallel symmetric cracks using the non-local theory
568
Analysis of two particular iterative learning control schemes in frequency and time domains
569
Analysis of two production inventory systems with buffer, retrials and different production rates
570
Analysis of two sections of Shalbatana Vallis’ tributary channels
571
Analysis of Two Simple Heuristics on a Random Instance ofk-
572
Analysis of Two Simulated In-field Chipping and Extraction Systems in Spruce Thinnings
573
Analysis of Two Stages Dehydrochlorination of Poly(vinyl chloride) Using TG-MS
574
Analysis of two stationary magnetohydrodynamics systems of equations including Joule heating
575
Analysis of two superbolides with a cometary origin observed over the Iberian Peninsula
576
Analysis of two Sweep-line Algorithms for Constructing Spanning Trees and Steiner Trees
577
Analysis of two undulator radiation with low energy correction
578
Analysis of two undulator radiation with low energy correction
579
Analysis of two-channel generalized sidelobe canceller (GSC) with post-filtering
580
Analysis of two-component mixture Weibull statistics for estimation of wind speed distributions
581
Analysis of two-component signal transduction by mathematical modeling using the KdpD/KdpE system of Escherichia coli
582
Analysis of Two-Dimensional Effect in the Measurement of Thermal Diffusivity of Thin Films with an AC Calorimetric Method1
583
Analysis of two-dimensional finite solids withmicrocracks
584
ANALYSIS OF TWO-DIMENSIONAL MAGNETO-DIELECTRIC GRATING SLAB
585
ANALYSIS OF TWO-DIMENSIONAL NON-LINEAR BURGERS’ EQUATIONS
586
Analysis of two-dimensional thin structures (from micro- to nano-scales) using the boundary element method
587
Analysis of two-dimensional transient conduction–radiation problems in an anisotropically scattering participating enclosure using the lattice Boltzmann method and the control volume finite element method Original Research Article
588
Analysis of two-grid methods for reaction-diffusion equations by expanded mixed finite element methods
589
Analysis of two-phase ceramic composites using micromechanical models
590
Analysis of two-phase flow characteristics in a natural circulation loop using the drift-flux model taking flow pattern change and subcooled boiling into consideration
591
Analysis of two-sample truncated data using generalized logistic models
592
Analysis of two-step index structure for complex spatial objects
593
Analysis of two-treatment, two-period crossover trials in emergency medicine
594
Analysis of T-Year Return Level for Partial Duration Rainfall Series
595
Analysis of type I endoleaks in a stented abdominal aortic aneurysm
596
Analysis of type traits of cika sires
597
Analysis of Type-II progressively hybrid censored data
598
Analysis of typical locomotion of a symmetric hexapod robot
599
Analysis of typical meteorological years in different climates of China
600
Analysis of tyrosinase binders from Glycyrrhiza uralensis root: Evaluation and comparison of tyrosinase immobilized magnetic fishing-HPLC and reverse ultrafiltration-HPLC
601
Analysis of tyrosine phosphorylation and phosphotyrosine-binding proteins in germinating seeds from Scots pine
602
Analysis of UHF signal using prediction model
603
Analysis of UK and European NOx and VOC emission scenarios in the Defra model intercomparison exercise
604
Analysis of UK domestic building retrofit scenarios based on the E.ON Retrofit Research House using energetic hygrothermics simulation – Energy efficiency, indoor air quality, occupant comfort, and mould growth potential
605
Analysis of ultrasonic assisted machining (UAM) on regenerative chatter in turning
606
Analysis of Ultrasonographic Misdiagnosis of Cephalothoracopagus Janiceps Conjoined Twins: A Case Report
607
Analysis of ultratrace triorganotin compounds in aquatic organisms by using capillary electrophoresis–inductively coupled plasma mass spectrometry
608
Analysis of ultraviolet radiation in clear skies in Beijing and its affecting factors
609
Analysis of UMTS radio channel access delay
610
Analysis of unbalanced force for high-speed slotless permanent magnet machine with Halbach array
611
Analysis of uncertainties associated with different methods to determine soil hydraulic properties and their propagation in the distributed hydrological MIKE SHE model
612
Analysis of uncertainties in gas uptake measurements using the gravimetric method
613
Analysis of uncertainties in infrared camera measurements of a turbofan engine in an altitude test cell
614
Analysis of uncertainties in the estimates of nitrous oxide and methane emissions in the UKʹs greenhouse gas inventory for agriculture
615
Analysis of uncertainty effects due to microstructural disorder in cellular or porous materials
616
Analysis of uncertainty in building design evaluations and its implications
617
Analysis of unconventional approaches for the rapid detection of surface lectin binding ligands on human cell lines
618
Analysis of undercompensation and overcompensation of friction in 1DOF mechanical systems
619
Analysis of Underlying Conditions of Indication of Creativity in Librarians Based on Oldham Model (Case Study: Public Libraries of Kermanshah Province)
620
Analysis of Under-Reamed Piles Subjected to Different Types of Load in Clayey Soil
621
Analysis of underwater mammal vocalisations using time–frequency-phase tracker
622
Analysis of underwater visual data to identify the impact of physical disturbance on horse mussel (Modiolus modiolus) beds
623
Analysis of undigested honey samples by isotope dilution inductively coupled plasma mass spectrometry with direct injection nebulization (ID-ICP-MS)
624
Analysis of undisturbed layers of a waste deposit landfill – Insights into the transformation and transport of organic contaminants
625
ANALYSIS OF UNEMPLOYMENT, CRIME, DIVORCE, SUICIDE RATES AND ECONOMIC GROWTH RELATION BY CAUSALITY TESTS: THE CASE OF TURKEY
626
Analysis of unfolded protein response during single-chain antibody expression in Saccaromyces cerevisiae reveals different roles for BiP and PDI in folding
627
Analysis of uniaxial compression of vertically aligned carbon nanotubes
628
Analysis of unidirectional (0°) fiber-reinforced laminated composite double cantilever beam specimen using higher order beam theories
629
Analysis of uniformly and linearly distributed mass dampers under harmonic and earthquake excitation
630
Analysis of united boundary-domain integro-differential and integral equations for a mixed BVP with variable coefficient
631
Analysis of University Organizational Culture Perceptions and Demographic Variables as Predictors of Perceived Stress
632
Analysis of unpredictable intra-QRS potentials in signal-averaged electrocardiograms using an autoregressive moving average prediction model
633
Analysis of unregulated emissions from an off-road diesel engine during realistic work operations
634
Analysis of unreliable bulk queue with state dependent arrivals
635
Analysis of unresolved complex mixtures of hydrocarbons extracted from Late Archean sediments by comprehensive two-dimensional gas chromatography (GC×GC)
636
ANALYSIS OF UNSATURATED WATER FLOW IN A LARGE SAND TANK
637
Analysis of unsaturated/saturated water flow near a fluctuating water table
638
Analysis of unsteady flow of a variable viscosity reactive fluid in a slit with wall suction or injection
639
Analysis of Unsteady Flow Structures in a Centrifugal Impeller Using Proper Orthogonal Decomposition
640
Analysis of unsteady gas–liquid flows in a rectangular tank: Comparison of Euler–Eulerian and Euler–Lagrangian simulations
641
Analysis of unsteady reacting flows and impact of chemistry description in Large Eddy Simulations of side-dump ramjet combustors
642
Analysis of unsteady supersonic cavity flow employing an adaptive meshing algorithm
643
Analysis of Unsupervised Dimensionality Reduction Techniques
644
Analysis of untreated human urinary proteins utilizing capillary zone electrophoresis
645
Analysis of upper bounds for the Pallet Loading Problem
646
Analysis of upper limb smoothness differences between elderly and young subjects during reaching exercises while moving in a velocity dependent force field
647
Analysis of upsets and failures due to ESD by the FDTD-INBCs method
648
Analysis of uranium-bearing Fe-phosphide from a submerged arc furnace for phosphorus production
649
Analysis of urban freight by rail using event based simulation
650
Analysis of urban growth pattern using logistic regression modeling, spatial autocorrelation and fractal analysis Case study: Ahvaz city
651
Analysis of urban heat-island effect using ASTER and ETM+ Data: Separation of anthropogenic heat discharge and natural heat radiation from sensible heat flux
652
Analysis of urban impacts on aquatic habitats in the central Amazon basin: Adult odonates as bioindicators of environmental quality
653
Analysis of Urban Land Shortages: The Case of Korean Cities,
654
Analysis of urban landscape pattern change in Yanzhou city based on TM/ETM+ images
655
Analysis of urban pollution episodes by inverse modeling
656
Analysis of urban sprawl and its role in the trend of green space changes Case study: City of Yazd
657
Analysis of Urban Waste Management Using System Dynamics Approach
658
ANALYSIS OF URINARY 8-HYDROXYDEOXYGUANOSINE BY CAPILLARY ELECTROPHORESIS AND SOLID-PHASE EXTRACTION
659
Analysis of urinary 8-nitroguanine, a marker of nitrative nucleic acid damage, by high-performance liquid chromatography–electrochemical detection coupled with immunoaffinity purification: Association with cigarette smoking
660
Analysis of urinary andrographolides and antioxidant status after oral administration of Andrographis paniculata leaf extract in rats
661
Analysis of urinary aristolactams by on-line solid-phase extraction coupled with liquid chromatography–tandem mass spectrometry
662
Analysis of urinary N-acetyl-S-(N-methylcarbamoyl)cysteine, the mercapturic acid derived from N,N-dimethylformamide
663
Analysis of urinary N-acetyl-S-(propionamide)-cysteine as a biomarker for the assessment of acrylamide exposure in smokers
664
Analysis of urinary neurotransmitters by capillary electrophoresis: Sensitivity enhancement using field-amplified sample injection and molecular imprinted polymer solid phase extraction Original Research Article
665
Analysis of Urinary Porphyrins in Rats Exposed to Aluminum and Iron
666
Analysis of urinary proteins by SDS-agarose gel electrophoresis in multiple myeloma patients
667
Analysis of Urine Flow in Three Different Ureter Models
668
Analysis of usability of potato pulp as solid fuel
669
Analysis of USA-European Community oilseeds agreements
670
Analysis of use of natural fibers and asphalt rubber binder in discontinuous asphalt mixtures
671
Analysis of useful strategies in teaching new language book (English for Schools, Prospect 1) For my Iranian junior secondary students
672
Analysis of user messages to MedlinePlus.gov
673
Analysis of user needs and information features in natural language queries seeking music information
674
Analysis of users and non-users of smartphone applications
675
Analysis of userʹs characteristics of three different playgrounds in districts with different socio-economical conditions
676
Analysis of usersʹ searches of CD-ROM databases in the national and university library in Zagreb
677
Analysis of users’ comments about the divorce factors
678
Analysis of Users’ Neural Responses to Native Advertisements Using Cognitive Indicators and Electroencephalography
679
Analysis of using gasification and incineration for thermal processing of wastes
680
Analysis of uterine rupture at university teaching hospital Pakistan
681
Analysis of uterine serous carcinoma by comparative genomic hybridization
682
Analysis of utilisation of renewable energies as heat sources for heat pumps in building sector in Poland
683
Analysis of utility and use of a web-based tool for digital signal processing teaching by means of a technological acceptance model
684
Analysis of UV ink photoinitiators in packaged food by fast liquid chromatography at sub-ambient temperature coupled to tandem mass spectrometry
685
Analysis of UVB values in the centre of the Iberian Peninsula
686
ANALYSIS OF V TRANSMISSION LINES RESPONSE TO EXTERNAL ELECTROMAGNETIC FIELDS
687
Analysis of vacA/cagA genotypes/status in Helicobacter pylori isolates from Iranian children and their association with clinical outcome
688
Analysis of vaccine’s schedules using models
689
Analysis of vacuum fatigue crack growth results and its implications
690
Analysis of vaginal delivery promotion package in the National Health System Reform Plan in Iran: a qualitative study
691
Analysis of valence electron structures (VES) of intermetallic compounds containing calcium in Mg–Al-based alloys
692
Analysis of Validity Decisions General Meeting of Shareholders Limited Liability Company in Circulation
693
Analysis of Value Creation Disclosures in Logistics Industry: Evidence From Integrated Reports
694
Analysis of valve motion after the reimplantation type of valve-sparing procedure (David I) with a new aortic root conduit
695
Analysis of Vanadium-Bearing Titanomagnetite Sintering Process by Dissection of Sintering Bed Original Research Article
696
Analysis of vapor–gas bubbles in a single artery heat pipe
697
Analysis of vaporization kinetics of group-III nitrides
698
Analysis of vaporization kinetics of group-III nitrides
699
ANALYSIS OF VAPOUR COMPRESSION REFRIGERATION (VCR) BASED AIR CONDITIONING (AC) SYSTEM FOR HOT and DRY CLIMATIC CONDITIONS IN OMAN
700
Analysis of vapours and foods by means of an electronic nose based on a sol–gel metal oxide sensors array
701
Analysis of variability and correlation in long-term economic growth rates
702
Analysis of variability in tensile ductility of a semi-solid metal cast A356 Al-alloy
703
Analysis of variability in tensile ductility of a semi-solid metal cast A356 Al-alloy
704
Analysis of Variability in the Burst Oscillations of the Accreting Millisecond Pulsar XTE J1814-338
705
Analysis of variability, heritability, and genetic advance in seed yield and related traits of orchardgrass (Dactylis glomerata L.) populations
706
Analysis of Variable Short-sequence DNA Repeats on the 29 kb Plasmid of Erwinia amylovora Strains
707
Analysis of variable-base heating and cooling degree-days for Turkey
708
Analysis of Variables and Indicators of the E-commerce Business Model Canvas for Knowledge Brokers
709
Analysis of Variables Influencing the Antenatal Care Visit in Slawi Primary Health Center, Indonesia
710
Analysis of variables that influence electric energy consumption in commercial buildings in Brazil
711
Analysis of variance and covariance: how to choose and construct models for the life sciences
712
Analysis of variance and linear contrasts in experimental design with generalized secant hyperbolic distribution
713
Analysis of Variance Application in Reservoir Simulation: A Case Study
714
Analysis of variance designs for model output Original Research Article
715
Analysis of Variance in Nonparametric Regression Models
716
Analysis of variance of nanofluid heat transfer data for forced convection in horizontal spirally coiled tubes
717
Analysis of variance on gross nitrogen mineralization data
718
Analysis of variance on gross nitrogen mineralization data
719
Analysis of variance with general errors and grouped and non-grouped data: Some iterative algorithms
720
Analysis of Variance: What Is Your Statistical Software Actually Doing?
721
Analysis of variance–principal component analysis: A soft tool for proteomic discovery Original Research Article
722
Analysis of variation in expression of autosomal dominant osteopetrosis type 2: Searching for modifier genes
723
Analysis of Variation of Various Parameters on Design of Discone Antenna
724
Analysis of variations, structures, and phylogenic characteristics of bovine leukocyte antigen DRB3 exon2
725
Analysis of various dosimetric parameters using multiple detectors in the cyberknife® robotic radiosurgery system
726
Analysis of various schemes for the estimation of atmospheric stability classification
727
Analysis of various thick-walled cross-ply composite cylindrical shells subjected to lateral pressures
728
Analysis of Variscan dynamics; early bending of the Cantabria¯Asturias Arc, northern Spain
729
Analysis of Variscan dynamics; early bending of the Cantabria–Asturias Arc, northern Spain
730
Analysis of Varying Geometri Structures of Fins using Radiators
731
Analysis of Vascular Access in Hemodialysis Patients: A Report From a Dialysis Unit in Casablanca
732
Analysis of Vascular Endothelial Growth Factors -634C/G and +936C/T Polymorphisms and Their Serum Levels in Women Suffering from Preeclampsia
733
Analysis of vascular injury in lumbar spine surgery
734
Analysis of vasopressin using capillary electrophoresis with laser-induced fluorescence detector based on competitive immunoassay
735
Analysis of Vector Estimating Modulation Method to Eliminate Common Mode Voltage
736
Analysis of vegetation indices derived from hyperspectral reflection measurements for estimating crop canopy parameters of oilseed rape (Brassica napus L.)
737
Analysis of Vegetation Isolines in Red-NIR Reflectance Space
738
Analysis of vegetation patterns in the Hispaniola island using AVHRR data Original Research Article
739
Analysis of vegetation within a semi-arid urban environment using high spatial resolution airborne thermal infrared remote sensing data
740
Analysis of vegetation-based management scenarios using MCDM in the Ramian watershed, Golestan, Iran
741
Analysis of Vegetative Compatibility Groups of Fusarium oxysporum from Eruca vesicaria and Diplotaxis tenuifolia
742
Analysis of vehicle requirements in a general automated guided vehicle system based transportation system
743
Analysis of vehicle use patterns during field training exercises to identify potential roads
744
Analysis of vehicular cabins’ thermal sensation and comfort state, under relative humidity and temperature control, using Berkeley and Fanger models
745
Analysis of velocity fields and dispersive cavity parameters as a function of building width to building height ratio using a 3-D computer model for squat buildings
746
Analysis of velocity profile measurements from wind-tunnel experiments with saltation
747
Analysis of velocity-displacement correlations in correlated random walks on lattices
748
Analysis of Ventilation Rate in Cross Ventilated Rooms by Varying Aperture Shape of Windows using CFD
749
Analysis of ventricular septal motion by Doppler tissue imaging in atrial septal defect and normal heart
750
Analysis of verbal diadochokinesis in normal speech using the diadochokinetic rate analysis program
751
Analysis of Verbs Forms in Sa’eed Faeeq’s Short Story: Cloud in the Sky
752
ANALYSIS OF VERNACULAR ARCHITECTURE IN TERMS OF SUSTAINABLE CONSIDERATIONS: THE CASE OF ŞİRİNCE VILLAGE IN WESTERN TURKEY
753
Analysis of vertebrate pest populations : Jim Hone. Cambridge University Press, 1994, 258 pp. Price £45.00
754
Analysis of vertical cracking phenomena in tensile-strained epitaxial film on a substrate: Part I. Mathematical formulation
755
Analysis of vertical cracking phenomena in tensile-strained epitaxial film on a substrate: Part II. Application to InxGa1−xAs/InP system
756
Analysis of vertical cracking phenomena in tensile-strained epitaxial film on a substrate: Part II. Application to InxGa1 xAs/InP system
757
Analysis of vertical displacement events and halo currents in COMPASS-D
758
Analysis of vertically loaded piles in multilayered transversely isotropic soils by BEM
759
Analysis of very fast transient overvoltage in transformer winding
760
Analysis of very fast transients in transformers
761
Analysis of Very Late In-Stent Thrombosis in the EVASTENT Patients
762
Analysis of very long chain polyunsaturated fatty acids using high-performance liquid chromatography – atmospheric pressure chemical ionization mass spectrometry
763
Analysis of very long-chain fatty acids using electrospray ionization mass spectrometry
764
Analysis of very-high-resistance grounding in high-voltage longwall power systems
765
Analysis of veterinary drug residues in shrimp: A multi-class method by liquid chromatography–quadrupole ion trap mass spectrometry
766
Analysis of viability and cell cycle status of frozen-thawed equine fibroblasts destined for nuclear transfer
767
Analysis of vibration by the wave propagation method and Bolotinʹs method for a rectangular thin plate with at least one side roller-supported
768
Analysis of Vibration Characteristics of PD Control Active Magnetic Bearing and Cracked Rotor System
769
Analysis of vibration damping in a rotating composite beam with embedded carbon nanotubes
770
Analysis of vibration for regions above rectangular delamination defects in solids
771
Analysis of Vibration Generated by the Rubbing of Flat Surfaces
772
Analysis of vibrational properties of C-doped hexagonal boron nitride (h-BN)
773
ANALYSIS OF VIBRATIONS AND ENERGY FLOWS IN SANDWICH PLATES BEARING CONCENTRATED MASSES AND SPRING-LIKE INCLUSIONS IN HEAVY FLUID-LOADING CONDITIONS
774
Analysis of vibrations in large flexible hybrid systems Original Research Article
775
Analysis of vibrations of an innovative civil tiltrotor
776
ANALYSIS OF VIEWS BY CHILD DEVELOPMENT SPECIALISTS EMPLOYED WORKING İN HOSPITAL ON THEİR WORK PROFESSION ENVIRONMENTS
777
Analysis of village accessibility and its impact on land use dynamics in a mountainous province of northern Vietnam
778
Analysis of violinistʹs upper limbs movements
779
Analysis of Viral Glycoproteins by MALDI-TOF Mass Spectrometry
780
Analysis of Viral Load in Children Infected with Human Metapneumovirus
781
Analysis of virgin olive oil volatile compounds by headspace solid-phase microextraction coupled to gas chromatography with mass spectrometric and flame ionization detection
782
Analysis of virtual communities supporting OSS projects using social network analysis
783
Analysis of virtual education challenges in exceptional schools of Guilan province from the perspective of teachers
784
Analysis of virtual-time complexity in weighted fair queuing
785
Analysis of Virulence Genes Among Methicillin Resistant Staphylococcus aureus (MRSA) Strains
786
Analysis of Virus-Infected Cells by Flow Cytometry
787
Analysis of visceral heterotaxy according to splenic status, appendage morphology, or both
788
Analysis of Viscoelastic Functionally Graded Sandwich Plates with CNT Reinforced Composite Face Sheets on Viscoelastic Foundation
789
Analysis of viscosity interaction on the misaligned conical–cylindrical bearing
790
Analysis of viscosity sensitivity for liquid property detection applications based on SAW sensors
791
Analysis of visible reflectance spectra of stored, cooked and diseased chicken meats
792
Analysis of Visual Impacts in Compact City’s Form
793
ANALYSIS OF VITAL SIGNS MONITORING USING AN IR-UWB RADAR
794
Analysis of vitamin B1 in dry-cured sausages by hydrophilic interaction liquid chromatography (HILIC) and diode array detection
795
Analysis of vitamin E isomers in seeds and nuts with and without coupled hydrolysis by liquid chromatography and coulometric detection
796
Analysis of vitamin K in green tea leafs and infusions by SPME–GC-FID
797
Analysis of vitamins A, E and C, iron and selenium contents in infant milk-based powdered formula during full shelf-life
798
Analysis of vitellogenin gene induction as a valuable biomarker of estrogenic exposure in various Mediterranean fish species
799
Analysis of vitellogenin gene structure in Caspian roach, Rutilus caspicus (Pisces: Cyprinidae) during exposure to Atrazine
800
Analysis of vitellogenin mRNA by quantitive reverse transcription polymerase chain reaction (RT–PCR) in juvenile fish exposed for 12 months to nonylphenol
801
Analysis of VLSI robust exponential stability with left coprime factorization
802
Analysis of vocal disorders in a feature space
803
Analysis of Vocal Fold Function From Acoustic Data Simultaneously Recorded With High-Speed Endoscopy
804
Analysis of Vocal-fold Vibrations from High-Speed Laryngeal Images Using a Hilbert Transform-Based Methodology
805
Analysis of Voice and Quantitative Measurement of Glottal Gap After Thyroplasty Type I in the Treatment of Unilateral Vocal Paralysis
806
Analysis of Voice Change During Cellular Phone Use: A Blinded Controlled Study
807
Analysis of void growth in a ductile material in front of a crack tip
808
Analysis of void growth in superplastic materials
809
Analysis of Void Volumes in Proteins and Application to Stability of the p53 Tumour Suppressor Protein
810
Analysis of volatile alcohols in apple juices by an electrochemical biosensor measuring in the headspace above the liquid
811
Analysis of volatile aldehyde biomarkers in human blood by derivatization and dispersive liquid–liquid microextraction based on solidification of floating organic droplet method by high performance liquid chromatography
812
Analysis of volatile aroma compounds of fresh chilli (Capsicum annuum) during stages of maturity using solid phase microextraction (SPME)
813
Analysis of volatile aroma compounds of fresh chilli (Capsicum annuum) during stages of maturity using solid phase microextraction (SPME)
814
ANALYSIS OF VOLATILE AROMATIC COMPOUNDS IN HEAVY FUEL OILS USING PURGE AND TRAP EXTRACTION AND A GAS CHROMATOGRAPHIC–MASS SPECTROMETRIC TECHNIQUE
815
Analysis of volatile bases by high performance liquid chromatography with aerosol-based detection
816
Analysis of volatile components and the sensory characteristics of irradiated raw pork
817
Analysis of volatile components of Lavandula luisieri L. by direct thermal desorption–gas chromatography–mass spectrometry
818
Analysis of volatile compounds emitted from fresh Syringa oblata flowers in different florescence by headspace solid-phase microextraction–gas chromatography–mass spectrometry Original Research Article
819
Analysis of volatile compounds from Malaysian durians (Durio zibethinus) using headspace SPME coupled to fast GC-MS
820
Analysis of volatile compounds from Malaysian durians (Durio zibethinus) using headspace SPME coupled to fast GC-MS
821
Analysis of volatile compounds in Curcuma wenyujin Y.H. Chen et C. Ling by headspace solvent microextraction–gas chromatography–mass spectrometry Original Research Article
822
Analysis of volatile compounds in five jackfruit (Artocarpus heterophyllus L.) cultivars using solid-phase microextraction (SPME) and gas chromatography-time-of-flight mass spectrometry (GC-TOFMS)
823
Analysis of volatile compounds in five jackfruit (Artocarpus heterophyllus L.) cultivars using solid-phase microextraction (SPME) and gas chromatography-time-of-flight mass spectrometry (GC-TOFMS)
824
Analysis of volatile compounds in traditional smoke-cured bacon(CSCB) with different fiber coatings using SPME
825
Analysis of volatile compounds of Antrodia camphorata in submerged culture using headspace solid-phase microextraction
826
Analysis of volatile compounds of Iberian dry-cured loins with different intramuscular fat contents using SPME–DED
827
Analysis of volatile compounds of mango wine
828
Analysis of volatile compounds of Mesona Blumes gum/rice extrudates via GC–MS and electronic nose
829
Analysis of volatile compounds of pineapple wine using solid-phase microextraction techniques
830
Analysis of volatile contaminants in vegetable oils by headspace solid-phase microextraction with Carboxen-based fibres
831
Analysis of volatile emissions from porcine faeces and urine using selected ion flow tube mass spectrometry
832
Analysis of volatile fatty acids in wastewater collected from a pig farm by a solid phase microextraction method
833
Analysis of volatile flavour compounds and acrylamide in roasted Malaysian tropical almond (Terminalia catappa) nuts using supercritical fluid extraction
834
Analysis of volatile fraction, fixed oil and tegumental waxes of the seeds of two different cultivars of Helianthus annuus
835
Analysis of volatile fruit components by headspace solid-phase microextraction
836
Analysis of volatile nanoparticles emitted from diesel engine using TOF-SIMS and metal-assisted SIMS (MetA-SIMS)
837
Analysis of volatile nitrosamines from a model system using SPME–DED at different temperatures and times of extraction
838
Analysis of Volatile Organic Compounds in Air with a Micro Ion Trap Mass Analyzer
839
Analysis of volatile organic compounds in polyurethane coatings based on Eucalyptus sp. bio-oil pitch using comprehensive two-dimensional gas chromatography (GC × GC)
840
Analysis of volatile organic compounds in polyurethane coatings based on Eucalyptus sp. bio-oil pitch using comprehensive two-dimensional gas chromatography (GC × GC)
841
Analysis of volatile organic compounds, using the purge and trap injector coupled to a gas chromatograph/ion-trap mass spectrometer: Review of the results in Dutch surface water of the Rhine, Meuse, Northern Delta Area and Westerscheldt, over the period 1
842
Analysis of volatile radiolysis products in gamma-irradiated LDPE and polypropylene films by thermal desorption–gas chromatography–mass spectrometry
843
Analysis of volatile secondary metabolites from Colombian Xylopia aromatica (Lamarck) by different extraction and headspace methods and gas chromatography
844
Analysis of volatile sulphur compounds in breath by gas chromatography–mass spectrometry using a three-stage cryogenic trapping preconcentration system
845
Analysis of volatile thiols in alcoholic beverages by simultaneous derivatization/extraction and liquid chromatography-high resolution mass spectrometry
846
Analysis of volatiles and 18S rRNA gene of Haplophyllum canaliculatum in in vitro cultures
847
Analysis of volatiles and semivolatiles in drinking water by microextraction and thermal desorption
848
Analysis of volatiles in water using headspace solid-phase microcolumn extraction
849
Analysis of volatiles of malt whisky by solid-phase microextraction and stir bar sorptive extraction
850
Analysis of volcanic gases by means of electronic nose
851
Analysis of volcanic gases by means of electronic nose
852
Analysis of voltage collapse mechanisms in state space
853
Analysis of voltage control for a self-excited induction generator using a current-controlled voltage source inverter (CC-VSI)
854
Analysis of voltage output LCC resonant converters, including boost mode operation
855
Analysis of Voltage Sag Measurement Algorithm
856
Analysis of voltage signals from superconducting accelerator magnets Original Research Article
857
Analysis of voltage tolerance of AC adjustable-speed drives for three-phase balanced and unbalanced sags
858
Analysis of voltage unbalance effects on induction motors with open and closed slots
859
Analysis of volume expansion mechanism of CO2–acetate systems at 40 °C
860
Analysis of Volumetric Images
861
Analysis of vortex levitation
862
Analysis of Vortex-Induced Vibration of Riser using Spalart-Almaras Model
863
Analysis of VSX1 Variations in Brazilian Subjects with Keratoconus
864
Analysis of vulnerability factors that control nitrate occurrence in natural springs (Osona Region, NE Spain) Original Research Article
865
Analysis of VX nerve agent hydrolysis products in wastewater effluents by ion chromatography with amperometric and conductivity detection
866
Analysis of waiting time of M/G/1/K system with vacations under random scheduling and LCFS
867
Analysis of wake vortex decay mechanisms in the atmosphere
868
Analysis of walking improvement with dynamic shoe insoles, using two accelerometers
869
Analysis of wall heat fluxes, reaction mechanisms, and unburnt hydrocarbons during the head-on quenching of a laminar methane flame
870
Analysis of wall shear stress in stented coronary artery using 3D computational fluid dynamics modeling
871
Analysis of wall shear stress in wet foam flows using the electrochemical method
872
Analysis of wall-function approaches using two-equation turbulence models
873
Analysis of wall-packed—bed thermal interactions
874
Analysis of warpage and shrinkage properties of injection-molded micro gears polymer composites using numerical simulations assisted by the Taguchi method
875
Analysis of warping and distortion transmission in mixed shell–GBT (generalized beam theory) models
876
Analysis of waste electrical and electronic equipment (WEEE) using laser induced breakdown spectroscopy (LIBS) and multivariate analysis
877
Analysis of Waste Retribution Income of Waste Management Service Improvement in East Part of Bandung City
878
Analysis of wastewater reuse potential in Beijing Original Research Article
879
Analysis of water absorption of bean and chickpea during soaking using Peleg model
880
Analysis of water and thermal sensitivity of open graded asphalt rubber mixtures
881
Analysis of water application uniformity from a centre pivot irrigator and its effect on sugar beet (Beta vulgaris L.) yield
882
Analysis of water binding in starch plasticized films
883
Analysis of water demand and water pollutant discharge using a regional input–output table: An application to the City of Chongqing, upstream of the Three Gorges Dam in China
884
Analysis of water distribution systems using a perturbation method
885
Analysis of water drop erosion on turbine blades based on a nonlinear liquid–solid impact model
886
Analysis of water droplet evaporation in a gas turbine inlet fogging process
887
Analysis of water extracts from airborne dust samples by capillary isotachophoresis
888
Analysis of water in food by near infrared spectroscopy
889
Analysis of water in Loy Yang brown coal using solid-state 1H NMR
890
Analysis of water layers and the extent of gelatinization for commercial starch products Original Research Article
891
Analysis of water leaching and transition processes in zirconium oxychloride octahydrate production
892
Analysis of water movement in paddy rice fields (I) experimental studies
893
Analysis of water movement in paddy rice fields (II) simulation studies
894
Analysis of water production costs of a nuclear desalination plant with a nuclear heating reactor coupled with MED processes Original Research Article
895
Analysis of water quality and circulation of four recreational Miami beaches through the use of Lagrangian Coherent Structures
896
ANALYSIS OF WATER QUALITY CRITERIA IN MEXICO
897
ANALYSIS OF WATER QUALITY CRITERIA IN MEXICO
898
Analysis of water quality in Lake Hamana using a coupled physical and biochemical model
899
Analysis of Water Quality Trends Using the Mann-Kendall Test and Sen’s Estimator of Slope in a Tropical River Basin
900
Analysis of water radiolysis in relation to stress corrosion cracking of stainless steel at high temperatures – Effect of water radiolysis on limiting current densities of anodic and cathodic reactions under irradiation
901
Analysis of water resources variability of the Caspian and Aral sea basins on the basis of solar activity
902
Analysis of water stable isotopes fingerprinting to inform conservation management: Lake Urema Wetland System, Mozambique
903
Analysis of water temperatures in Conowingo Pond as influenced by the Peach Bottom atomic power plant thermal discharge
904
Analysis of water transport in a five-layer model of PEMFC
905
Analysis of water transport in a high pressure PEM electrolyzer
906
Analysis of water vapour transmission rate of perforation-mediated modified atmosphere packaging (PM-MAP)
907
Analysis of Water Waves Passing Over a Submerged Rectangular Dike
908
Analysis of waterborne paints by gas chromatography–mass spectrometry with a temperature-programmable pyrolyzer
909
Analysis of water-level response to rainfall and implications for recharge pathways in the Chalk aquifer, SE England
910
Analysis of watershed topography effects on summer precipitation variability in the southwestern United States
911
Analysis of water-soluble ions and their precursor gases over diurnal cycle
912
Analysis of wave attenuation in unidirectional viscoelastic composites by a differential scheme
913
ANALYSIS OF WAVE FUNCTION, ENERGY AND TRANSMISSION COEFFICIENTS IN GaN/ALGaN SUPERLATTICE NANOSTRUCTURES
914
Analysis of Wave Motion in a Micropolar Transversely Isotropic Medium
915
Analysis of wave patterns in MR elastography of skeletal muscle using coupled harmonic oscillator simulations
916
Analysis of wave propagation in a thin composite cylinder with periodic axial and ring stiffeners using periodic structure theory
917
Analysis of wave propagation in cylindrical pipes with local inhomogeneities
918
Analysis of wave propagation in orthotropic microtubules embedded within elastic medium by Pasternak model
919
Analysis of wave propagation in piezoelectric coupled cylinder affected by transverse shear and rotary inertia
920
Analysis of wave propagation in sandwich beams with parametric stiffness modulations
921
Analysis of wave propagation in sandwich plates with and without heavy fluid loading
922
Analysis of wave propagation in saturated porous media. I. Theoretical solution Original Research Article
923
Analysis of wave propagation in saturated porous media. II. Parametric studies Original Research Article
924
Analysis of wave propagation in thick-section composite laminates using effective moduli
925
Analysis of wave-drift damping of a VLFS with shallow draft
926
Analysis of waveguide dispersion characteristics of WI- and WII-type triple-clad single-mode fibers
927
Analysis of waveguide silica glasses using Raman microscopy
928
Analysis of wavelength influence on a-Si crystallization processes with nanosecond laser sources
929
ANALYSIS OF WAVELETS IN CHAOTIC STATES FOR A ONE-DEGREE-OF-FREEDOM SYSTEM WITH VISCOELASTIC RESTRAINTS
930
Analysis of waves converted from S to P in the upper mantle beneath the Baltic Shield
931
Analysis of wax burn cases presenting to an Emergency Department in Hong Kong during the Chinese Mid-Autumn festival
932
Analysis of wax ester molecular species by high performance liquid chromatography/atmospheric pressure chemical ionisation mass spectrometry
933
Analysis of wax esters by silver-ion high-performance liquid chromatography–tandem mass spectrometry
934
Analysis of wax esters in edible oils by automated on-line coupling liquid chromatography–gas chromatography using the through oven transfer adsorption desorption (TOTAD) interface
935
Analysis of wax hydrocarbons in petroleum source rocks from the Damintun depression, eastern China, using high temperature gas chromatography
936
Analysis of weak interactions involving organic fluorine: Insights from packing features in substituted 4-keto-tetrahydroindoles
937
Analysis of Weak Performance Hypothesis, Multi-Fractality Feature and long-Term Memory of Stock Price in Tehran Stock Exchange
938
Analysis of Weak Wind Stable Conditions from the Observations of the Land Surface Processes Experiment at Anand in India
939
Analysis of wear and friction of total knee replacements part II: Friction and lubrication as a function of wear
940
Analysis of wear and friction of total knee replacements: Part I. Wear assessment on a three station wear simulator
941
Analysis of wear asymmetry in a series of 94 retrieved polyethylene tibial bearings
942
Analysis of wear behavior and graphitization of hydrogenated DLC under boundary lubricant with MoDTC
943
Analysis of wear characteristics of natural rubber nanocomposites
944
Analysis of wear in deep-drawing process of a cylindrical cup
945
Analysis of wear mechanisms in low-friction AlMgB14–TiB2 coatings
946
Analysis of wear of a gas nitrided H13 tool steel die in aluminium extrusion
947
Analysis of wear of cemented carbide cutting tools during milling operation of gray iron and compacted graphite iron
948
Analysis of wear particle boundaries found in sheep knee joints during in vitro wear tests without muscle compensation
949
Analysis of wear resistance and its mechanism in an Fe–Mn–Si–Cr–Ni shape memory alloy
950
Analysis of wear track and debris of stir cast LM13/Zr composite at elevated temperatures
951
Analysis of weather data measured in Valencia during the years 1989, 1990, 1991 and 1992
952
Analysis of Web caching architectures: hierarchical and distributed caching
953
ANALYSIS OF WEB MINING APPLICATIONS AND BENEFICIAL AREAS
954
Analysis of Web page image tag distribution characteristics
955
Analysis of web-based tutorials created by academic libraries Original Research Article
956
Analysis of Wedge Stability Using Different Methods
957
Analysis of weed dispersal to predict chances of re-colonisation
958
Analysis of Weight Control among Overweight and Obese Iranian Adolescents: Application of the Trans-theoretical Model
959
Analysis of Weka Data Mining Techniques for Heart Disease Prediction System
960
Analysis of weld cracking in shotblasting chambers made of Hadfield steel
961
Analysis of weld-bonded dissimilar materials
962
Analysis of weld-cracking and improvement of the weld-repair process of superplastic forming tools
963
Analysis of welded tensile plates with a surface notch in the weld metal and heat affected zone
964
Analysis of welding conditions based on induced thermal irreversibilities in welded structures: Cases of welding sequences and preheating treatment
965
Analysis of welding distortion due to narrow-gap welding of upper port plug
966
Analysis of well casing connection pullout
967
Analysis of well residual drawdown after a constant-head test
968
Analysis of wellbore instability in vertical, directional, and horizontal wells using field data
969
Analysis of wet oxidation process after initial thermohydrolysis of excess sewage sludge
970
Analysis of wheat gluten and starch matrices during deep-fat frying
971
Analysis of wheat straw lignin by thermogravimetry and pyrolysis–gas chromatography/mass spectrometry
972
Analysis of wheat straw lignin by thermogravimetry and pyrolysis–gas chromatography/mass spectrometry
973
Analysis of wheel and rail Hertzian and Non-Hertzian contact theories using UM software considering the effect of rail inclination on wheel wear
974
Analysis of wheel–rail interaction using FE software
975
Analysis of white layers formed in hard turning of AISI 52100 steel
976
Analysis of white layers formed in hard turning of AISI 52100 steel
977
Analysis of white layers formed in hard turning of AISI 52100 steel
978
Analysis of Whole Bacterial Cells by Flow Field-Flow Fractionation and Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry
979
Analysis of whole cell protein profiles of Salmonella serovars isolated from chicken, turkey and sheep faeces by SDS-PAGE
980
Analysis of whole congener mixtures of polybromodiphenyl ethers by gas chromatography–mass spectrometry in both environmental and biological samples at femtogram levels
981
Analysis of wildlife tourism experiences with endangered species: An exploratory study of encounters with giant pandas in Chengdu, China
982
Analysis of Willingness to Pay for Implantable Cardioverter–Defibrillator Therapy
983
Analysis of WiMAX Positioning Using Received- Signal-Strength Method
984
Analysis of wind action on unique structures with application to Seville Fair Gateways
985
Analysis of wind characteristics and potential in the East Mediterranean—the Lesvos case
986
Analysis of wind characteristics in the Maltese Archipelago
987
Analysis of wind farm islanding experiment
988
Analysis of wind flow around a parabolic collector (1) fluid flow
989
Analysis of wind flow around a parabolic collector (2) heat transfer from receiver tube
990
Analysis of wind potential and characteristics in North Aegean, Greece
991
Analysis of wind power generation and prediction using ANN: A case study
992
Analysis of wind power productions by means of an analog model
993
Analysis of wind regimes for energy estimation
994
Analysis of wind speed data and wind energy potential in three selected locations in south-east Nigeria
995
Analysis of Wind Speed Data Based on the New Upper Truncated Inverse Weibull Distribution; A Case Study: Ardabil, Iran
996
Analysis of wind speed distributions: Wind distribution function derived from minimum cross entropy principles as better alternative to Weibull function
997
Analysis of Wind Speed Forecasting Error Effects on Automatic Generation Control Performance
998
Analysis of wind-induced inflow and outflow through a single opening using LES & DES
999
Analysis of wind-induced internal pressure in enclosures
1000
Analysis of wind-induced vibration of fluid–structure interaction system for isolated aqueduct bridge
