<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Application of Taguchi method to determine the optimal water depth and glass cooling rate in solar stills
2
Application of Taguchi Method to Investigate the Effects of Process Factors on the Production of Industrial Piroxicam Polymorphs and Optimization of Dissolution Rate of Powder
3
Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3
4
Application of Taguchi Methodology in adsorption of Malachite Green dye using chemically enhanced Bambusa Tulda (Indian Timber Bamboo)
5
Application of Taguchi methods to DEM calibration of bonded agglomerates
6
Application of Taguchi optimization technique in determining aluminum to brass friction stir welding parameters
7
Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin-shell part
8
Application of Taguchi technique to investigation of geometry and position of V-ring indenter in fine-blanking process
9
Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites
10
Application of Taguchi techniques to study friction and wear properties of MoS2 coatings deposited on laser textured surface
11
Application of Taguchi’s Design of Experiment in Performance Analysis of Destination Sequence Distance Vector (DSDV) Routing Protocol in Mobile Ad Hoc Networks
12
Application of Taguchi’s experimental design method for optimization of Acid Red 18 removal by electrochemical oxidation process
13
Application of Taguchi’s methods to investigate some factors affecting microporosity formation in A360 aluminium alloy casting
14
APPLICATION OF TAGUCHIʹS OPTIMIZATION METHOD AND SELF-ADAPTIVE DIFFERENTIAL EVOLUTION TO THE SYNTHESIS OF LINEAR ANTENNA ARRAYS
15
Application of tailor-made membranes in a multi-stage process for the purification of sweeteners from Stevia rebaudiana Original Research Article
16
Application of Talc Formulations of Pseudomonas fluorescens Migula and Trichoderma viride Pers. ex S.F. Gray Decrease the Sheath Blight Disease and Enhance the Plant Growth and Yield in Rice
17
Application of Tandem Cascade to Design of Fan Stator with Supersonic Inflow
18
Application of tandem column solid phase extraction and flame atomic absorption spectrometry for the determination of inorganic and organically bound forms of iron in wine
19
Application of tandem Ugi reaction/ring-closing metathesis in multicomponent synthesis of unsaturated nine-membered lactams
20
Application of tartarate derived bidentate bioxazolines in enantioselective addition of terminal alkynes to imines
21
Application of Task Complexity Along +/- single Task Dimension and its Effect on Fluency in Writing Performance of Iranian EFL Learners
22
Application of taste sensing system for characterisation of enzymatic hydrolysates from shrimp processing by-products
23
Application of Tau Approach for Solving Integro-Differential Equations with a Weakly Singular Kernel
24
Application of Taylor transformation to nonlinear predictive control problem
25
Application of Taylor transformation to optimize rectangular fins with variable thermal parameters
26
APPLICATION OF TAYLOR TRANSFORMATION TO THE THERMAL STRESSES IN ISOTROPIC ANNULAR FINS
27
Application of TDA technique to estimate the hydrocarbon saturation using MRIL Data: A Case study for a Southern Iranian Oilfield
28
Application of T-DNA insertional mutagenesis for improving cellulase production in the filamentous fungus Trichoderma reesei
29
Application of TDR Technology to Water Content Monitoring of Capillary Barriers Made of Pulp and Paper Residues
30
Application of TDR Technology to Water Content Monitoring of Capillary Barriers Made of Pulp and Paper Residues
31
Application of TDR to water level measurement
32
Application of TDS technique to developed reservoirs
33
Application of TDS technique to developed reservoirs
34
APPLICATION OF TECHNIQUES ASSISTING THE COMMUNICATION WITH DEMENTIA PATIENTS BY STUDENTS – SOCIAL WORK
35
Application of Technology and Science of Intellectual Property Rights in the Papua Traditional Culture Perspective
36
application of technology in educating nursing students during covid-19: a systematic review
37
Application of telluric-telluric profiling combined with magnetotelluric and self-potential methods to geothermal exploration in the Fujian Province, China
38
Application of temperature fuzzy controller in an indirect resistance furnace
39
Application of Temperature Inference Method Based on Soft Sensor Technique to Plate Production Process Original Research Article
40
Application of temperature modified titanate nanotubes for removal of an azo dye from water in a hybrid photocatalysis-MD process
41
Application of Temperature Parallel Simulated Annealing to Loading Pattern Optimizations of Pressurized Water Reactors
42
Application of temperature rising elution fractionation in polyolefins
43
Application of temperature-controlled attenuated total reflectance-mid-infrared (ATR-MIR) spectroscopy for rapid estimation of butter adulteration
44
Application of temperature-induced phase partition of proteins for the detection of smoked paprika adulteration by free zone capillary electrophoresis (FZCE)
45
Application of temperature-programmed oxidation, multinuclear MAS NMR and DRIFT spectroscopy to the surface characterization of modified silica nanoparticles
46
Application of temperature-programmed reduction to the characterization of anionic clays
47
Application of temporal temperature gradient gel electrophoresis for characterisation of fungal endophyte communities of Salix caprea L. in a heavy metal polluted soil Original Research Article
48
Application of tephrochronology to the timing and correlation of palaeoceanographic events recorded in Holocene and Late Glacial shelf sediments off North Iceland
49
Application of ternary diagrams in the design of methanation systems
50
Application of TERRA/MODIS images, TM images and weather data to assess the effect of cold damage on rice yield
51
Application of test reactions to study micromixing in the rotor-stator mixer (test reactions for rotor-stator mixer)
52
Application of tests of goodness of fit in determining the probability density function for spacing of steel sets in tunnel support system
53
Application of tetracyclic polyprenoids as indicators of input from fresh-brackish water environments
54
Application of tetramer technology in studies on autoimmune diseases
55
Application of tetraoxadiaza-crown ether derivatives as chiral selector modifiers in capillary electrophoresis
56
Application of Text Mining to Extract Hotel Attributes and Construct Perceptual Map of Five Star Hotels from Online Review: Study of Jakarta and Singapore Five-Star Hotels
57
Application of Text Summarization techniques to the Geographical Information Retrieval task
58
Application of Texture Analysis Method for Classification of Benign and Malignant Thyroid Nodules in Ultrasound Images
59
Application of Texture Analysis Method for Classification of Benign and Malignant Thyroid Nodules in Ultrasound Images
60
Application of texture image analysis for the classification of bovine meat
61
Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y Original Research Article
62
Application of TG-DTA to study of Ancient Potteries from Kaveripakkam, Vellore district, Tamilnadu, India
63
Application of TG–DTA to the study of Amynteon lignites, northern Greece
64
Application of TG–DTG analysis and centrifugal separation in the investigation of less combustible constituents in coals
65
Application of TG-FTIR to study SO2 evolved during the thermal decomposition of coal-derived pyrite
66
Application of TG–FTIR to the determination of organic oxygen and its speciation in the Argonne premium coal samples
67
Application of TG-FTIR to the determination of oxygen content of coals
68
Application of thallium(I) as an internal standard redox process in voltammetric measurements
69
Application of Thau Observer for Fault Detection of Micro Parallel Plate Capacitor Subjected to Nonlinear Electrostatic Force
70
APPLICATION OF THE "EQUIVALENT CABLE BUNDLE METHOD" FOR MODELING CROSSTALK OF COMPLEX CABLE BUNDLES WITHIN UNIFORM STRUCTURE WITH ARBITRARY CROSS-SECTION
71
Application of the .G0 G /-expansion method to (3 C1)-dimensional nonlinear evolution equations
72
Application of the `double spikeʹ technique to Pb-isotope geochronology
73
Application of the ‘waste to water’ concept to Sharm El Sheikh through a CFD simulation Original Research Article
74
Application of the “Hybrid Approach” to Chronic Total Occlusions in Patients With Previous Coronary Artery Bypass Graft Surgery (from a Contemporary Multicenter US Registry)
75
Application of the “MBWC” two-dimensional position readout technique to a multiwire proportional counter
76
Application of the “threshold of toxicological concern” to derive tolerable concentrations of “non-relevant metabolites” formed from plant protection products in ground and drinking water
77
Application of the “trimethyl lock”1 to Ganciclovir, a pro-prodrug with increased oral bioavailability
78
Application of the “VARICOL” process to the separation of the isomers of the SB-553261 racemate
79
Application of the 1,2-Dihydroxybenzene-3,5-Disulfonic Acid for Separation and Preconcentration of Trace Iron and Determination by Eight Order Derivative Spectrophotometry
80
Application of the 15N technique to determine the contributions of nitrification and denitrification to the flux of nitrous oxide from aerated pig slurry
81
Application of the 29Si NMR 2D INEPT spin-flip J-resolved technique to the structural analysis of trimethylsilylated glycosides
82
Application of the 2-D constant strain assumption to FEM elements consisting of an arbitrary number of nodes
83
Application of the 3-D boundary element method to delaminated composite structures
84
Application of the 6-aminoquinolyl-N-hydroxysccinimidyl carbamate (AQC) reagent to the RP-HPLC determination of amino acids in infant foods
85
Application of the accelerated failure time model to lung cancer data
86
Application of the accident consequence analysis in the emergency system design of an SI cycle hydrogen production plant
87
Application of the accurate mass and time tag approach in studies of the human blood lipidome
88
Application of the acoustic emission technique to characterise liquid transfer in a porous ceramic during drying
89
Application of the adaptive cross approximation technique for the coupled BE-FE solution of symmetric electromagnetic problems
90
APPLICATION OF THE ADAPTIVE MATRIX FILTER TO INVERSE HEAT CONDUCTION PROBLEMS
91
Application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sobol Approaches for Modeling and Sensitivity Analysis of the Biosorption of Triglyceride from the Blood Serum
92
Application of the addition of triorganozincates to N-(tert-butanesulfinyl)imines to the enantioselective synthesis of α-amino acids
93
Application of the ADM1 model to advanced anaerobic digestion
94
Application of the Adomian decomposition method for the Fokker–Planck equation
95
Application of the adsorption effect of optical fibres for the determination of critical micelle concentration
96
Application of the airflow control by electro-hydrodynamic actuator
97
Application of the AMBUR R package for spatio-temporal analysis of shoreline change: Jekyll Island, Georgia, USA
98
Application of the Analytic Hierarchy Process (AHP) in Multi- Criteria Analysis of the Selection of Cranes
99
Application of the analytic hierarchy process (AHP) in multi-criteria analysis of the selection of intelligent building systems
100
Application of the analytic hierarchy process in agriculture in developing countries
101
Application of the analytic hierarchy process to compare alternatives for the long-term management of surplus mercury
102
Application of the Analytic Hierarchy Process to irrigation project improvement: Part I. Impacts of irrigation project internal processes on crop yields
103
Application of the Analytic Hierarchy Process to irrigation project improvement: Part II. How professionals evaluate an irrigation project for its improvement
104
Application of the analytical hierarchy process (AHP) for landslide susceptibility mapping: A case study from the Tinau watershed, west Nepal
105
Application of the analytical hierarchy process in the selection of desalination plants Original Research Article
106
Application of the analytical hierarchy process to establish health care waste management systems that minimise infection risks in developing countries
107
Application of the Anderko–Pitzer EoS to the calculation of thermodynamical properties of systems involved in the supercritical water oxidation process
108
Application of the ANOVA-PCA method to stability studies of reference materials Original Research Article
109
Application of the Ant Colony Search Algorithm to Reactive Power Pricing in an Open Electricity Market
110
Application of the antibunching in dye fluorescence: measuringthe excitation rates in solution Original Research Article
111
Application of the Antipodal Grasp Theorem to Cable-Driven Robots
112
Application of the aqueous two-phase systems of ethylene and propylene oxide copolymer-maltodextrin for protein purification
113
Application of the arbitrarily primed polymerase chain reaction for the detection of DNA damage
114
Application of the Arbitrary Lagrangian Eulerian formulation to the numerical simulation of cold roll forming process
115
Application of the arc-length method for the stability analysis of solid unreinforced masonry walls under lateral loads
116
Application of the arc-length method in nonlinear frequency response
117
Application of the area under the curve of carboplatin in predicting toxicity and efficacy
118
Application of the Armstrong friction model to study dynamic transient response in Tworkpiece–fixture systems
119
Application of the Arrhenius equation to solid state kinetics: can this be justified?
120
Application of the assay of aflatoxins by liquid chromatography with fluorescence detection in food analysis
121
Application of the asymmetric aminohydroxylation reaction for the syntheses of HIV-protease inhibitor, hydroxyethylene dipeptide isostere and γ-amino acid derivative
122
Application of the Australian river bioassessment system (AUSRIVAS) in the Brantas River, East Java, Indonesia
123
Application of the authigenic 10Be/9Be dating method to continental sediments: Reconstruction of the Mio-Pleistocene sedimentary sequence in the early hominid fossiliferous areas of the northern Chad Basin
124
APPLICATION OF THE AUTO- AND CROSS-POWER SPECTRA TO HYDRO- AND AEROACOUSTICS
125
Application of the average field method to the prediction of stable shapes of coherent precipitates under uniaxial stresses
126
Application of the average field method to the prediction of stable shapes of coherent precipitates under uniaxial stresses
127
Application of the Avrami Theory for Wax Crystallisation of Synthetic Crude Oil
128
Application of the Avrami, Tobin, Malkin, and Urbanovici–Segal macrokinetic models to isothermal crystallization of syndiotactic polypropylene
129
Application of the aza-Wittig reaction to the synthesis of pyrazinothienotriazolopyrimidinones: a new tetracyclic ring system
130
Application of the background-field method to the electroweak standard model Original Research Article
131
Application of the Baheʹs pseudolattice theory to water–1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) mixtures at 298.15 K: Part II. Acidity scales
132
Application of the Baheʹs pseudolattice-theory to water—1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) mixtures at 298.15 K: Part I. Autoprotolysis constants
133
Application of the ballistic plasmatron of superadiabatic compression for surface treatment
134
Application of the ball-spine algorithm to design an axial-flow comprssor blade
135
Application of the Barker lattice theory to modeling of thermodynamic properties of PbO–B2O3–SiO2 melts
136
Application of the Base Isolation Systems to a Reinforced Concrete Building and Cost Analysis
137
Application of the bayer immuno I AFP and HCG-ER assays in a multi-centre maternal serum screening program
138
Application of the Bayesian calibration methodology for the parameter estimation in CoupModel
139
Application of the Beck model to stock markets: Value-at-Risk and portfolio risk assessment
140
Application of the Bellman and Zadeh's principle for identifying the fuzzy decision in a network with intermediate storage
141
Application of the BEM for numerical modelling of continuous casting
142
Application of the BEM in biopotential problems
143
Application of the BEM to chromium electroplating simulation and to identification of experimental polarisation laws
144
Application of the BHQ benzannulation reaction to the synthesis of benzo-fused coumarins
145
Application of the bilinear compression function to calorimetry
146
Application of the bilinear compression function to calorimetry
147
Application of the biomarker responses in scallop (Chlamys farreri) to assess metals and PAHs pollution in Jiaozhou Bay, China
148
Application of the biorefinery concept to produce l-lactic acid from the soybean vinasse at laboratory and pilot scale
149
Application of the biotin–dUTP chromosome labelling technique to study the role of 5-bromo-2′-deoxyuridine in the formation of UV-induced sister chromatid exchanges in CHO cells
150
Application of the bispectrum for detection of small nonlinearities excited sinusoidally
151
Application of the blackbody radiation source for characteristics measurement of submillimeter low-temperature direct detectors
152
Application of the blackbody radiation source for characteristics measurement of submillimeter low-temperature direct detectors
153
Application of the block backward differential formula for numerical solution of Volterra integro-differential equations
154
Application of the boundary element method for the numerical modelling of the solidification of cylindrical and spherical castings
155
Application of the boundary element method to rubber-like elasticity
156
Application of the boundary integral equation method to the coupled bending-torsional vibrations of elastic beams
157
Application of the boundary-domain element method to the pre/post-buckling problem of von Kármán plates
158
Application of the boundary-domain integral equation in elastic inclusion problems
159
Application of the boundary-layer theory to the analysis of composite shells of revolution
160
Application of the Box-Behnken Design for Optimizing Biodiesel Output from Castor Oil: Analysis and Characterization
161
Application of the Box–Behnken design to the optimization of process parameters in foam cup molding
162
Application of the Box-Wilson experimental design method for the spherical oil agglomeration of coal
163
Application of the bridgehead fragments for the design of conformationally restricted melatonin analogues
164
Application of the broad-spectrum bacteriocin enterocin AS-48 to inhibit Bacillus coagulans in canned fruit and vegetable foods
165
Application of the BTEM family of algorithms to reconstruct individual UV–Vis spectra from multi-component mixtures
166
Application of the Building Environmental Performance Model (BEPM) in Hong Kong
167
Application of the bulk properties of a silicone PSA to peeling
168
Application of the C4.5 classifier to building an expert system for ion chromatography
169
Application of the Callaway theory to analysis of thermal transport by phonons in ceramic and biomorphic composites
170
Application of the CALPHAD approach to Mg-alloys design
171
Application of the CALPHAD approach to Mg-alloys design
172
Application of the CALPHAD method to predict the thermal conductivity in dielectric and semiconductor crystals
173
Application of the CAMEL process simulator to the dynamic simulation of gas turbines
174
Application of the Campbell–Magaard theorem to higher-dimensional physics
175
Application of the can technique and radon gas analyzer for radon exhalation measurements
176
Application of the CARLIT index along a biogeographical gradient in the Alboran Sea (European Coast)
177
Application of the Catalytic Friedel-Crafts Acylation Reaction and Regioselectivity Correlations
178
Application of the cause–consequence diagram method to static systems
179
Application of the cause–consequence diagram method to static systems
180
Application of the cavity model to lossy power-return plane structures in printed circuit boards
181
Application of the CBM-CFS3 model to estimate Italyʹs forest carbon budget, 1995–2020
182
Application of the CBM-CFS3 model to estimate Italyʹs forest carbon budget, 1995–2020
183
Application of the CBSM method for selected ternary and pseudo-ternary L + L systems, and novel criterion for extractants capability
184
Application of the CEN (European Committee for Standardization) small punch creep testing code of practice to a representative repair welded P91 pipe
185
Application of the Central Encryption System in the Dynamic Secret Sharing Scheme (II)
186
Application of the Central Limit Theorem in microbial risk assessment: High number of servings reduces the Coefficient of Variation of food-borne burden-of-illness
187
APPLICATION OF THE CENTRE MANIFOLD THEORY IN NON-LINEAR AEROELASTICITY
188
Application of the Cercignani–Lampis scattering kernel to calculations of rarefied gas flows. I. Plane flow between two parallel plates
189
Application of the Cercignani–Lampis scattering kernel to calculations of rarefied gas flows. II. Slip and jump coefficients
190
Application of the Cercignani–Lampis scattering kernel to calculations of rarefied gas flows. III. Poiseuille flow and thermal creep through a long tube
191
Application of the Characteristic Bisection Method for locating and computing periodic orbits in molecular systems Original Research Article
192
Application of the characteristic root index model to the estimation of N-octanol/water partition coefficients. polychlorinated biphenyls
193
Application of the charged polymeric materials as additional permselective membranes for improvement of the performance characteristics of urea-sensitive ENFETs 2. Urea determination in blood serum
194
Application of the Chebyshev polynomial in solving Fredholm integral equations
195
Application of the Chebyshev pseudospectral method to van der Waals fluids
196
Application of the chemical vapor infiltration and reaction (CVI-R) technique for the preparation of highly porous biomorphic SiC ceramics derived from paper
197
Application of the chemical vapor-etching in polycrystalline silicon solar cells
198
Application of the chemiluminescence systems to evaluate the role of Fcγ and complement receptors in stimulating the oxidative burst in neutrophils
199
Application of the Cheng-Finnie method to the calculation of stress intensity factors in thin-walled pipes with long axial cracks with allowance for geometric nonlinearity
200
Application of the chiral base desymmetrisation of imides to the synthesis of the alkaloid jamtine and the antidepressant paroxetine
201
Application of the chromatographic retention index system for the estimation of the calibration constants of permeation passive samplers with polydimethylsiloxane membranes
202
Application of the CIE test cases to assess the accuracy of lighting computer programs
203
Application of the cluster variation method to ε-Fe2N1-z and ζ-Fe2N: ordering of interstitial atoms Original Research Article
204
Application of the cluster/site approximation to fcc phases in Ni-Al-Cr system
205
Application of the cluster/site approximation to fcc phases in Ni–Al–Cr system Original Research Article
206
Application of the cluster/site approximation to fcc phases in the Ni–Al–Cr–Re system Original Research Article
207
Application of the cluster/site approximation to the calculation of coherent interphase boundary energies
208
Application of the cluster/site approximation to the calculation of coherent interphase boundary energies Original Research Article
209
Application of the cluster/site approximation to the calculation of multicomponent alloy phase diagrams
210
Application of the cluster/site approximation to the calculation of multicomponent alloy phase diagrams Original Research Article
211
Application of the cluster-site approximation (CSA) model to the f.c.c. phase in the Ni–Al system Original Research Article
212
Application of the CN Intermediate-term Earthquake Prediction Algorithm to the Area of the Southern External Dinarides
213
Application of the coastal and marine ecological classification standard using satellite-derived and modeled data products for pelagic habitats in the Northern Gulf of Mexico
214
Application of the cohesive model for predicting the residual strength of a large scale fuselage structure with a two-bay crack
215
Application of the cohesive zone model for the evaluation of stiffness losses in a rotor with a transverse breathing crack
216
Application of the Cole-Hopf transformation for finding the analytical solutions of the dynamics of a gravitating system of spherical gas-dust cloud
217
APPLICATION OF THE COLLOCATION METHOD IN THREE DIMENSIONS TO A MODEL SEMICONDUCTOR PROBLEM
218
Application of the colloidal stability of TiO2 particles for recovery and reuse in solar photocatalysis
219
Application of the colorimetric method to chloride diffusion evaluation in concrete structures
220
Application of the combined nonlinear-condensation transformation to problems in statistical analysis and theoretical physics Original Research Article
221
Application of the combined RWG basis functions to the MFIE for the scattering analysis of small sharp-edged objects
222
Application of the comet and micronucleus assays to butterfish (Pholis gunnellus) erythrocytes from the Firth of Forth, Scotland
223
Application of the competing risks analysis to fracture toughness of silicon-killed C-Mn plate steels
224
Application of the complete multiple reciprocity method for 3D impedance extraction with multiple frequency points
225
Application of the complex network method in solid-state sintering
226
Application of the complex step method to chemistry-transport modeling
227
Application of the componential method for ecological footprint calculation of a Chinese university campus
228
Application of the computational method for predicting NOx reduction within large scale coal-fired boiler
229
Application of the computational theory of perceptions to human gait pattern recognition
230
Application of the computer code TOUGH2 to the simulation of supercritical conditions in geothermal systems
231
Application of the concept of acoustic influence coefficients for the optimization of a vehicle roof
232
Application of the Concept of Defamiliarization in Translation Studies: Case Studies of the Translation of Film Titles
233
Application of the concept of evolving structure tensors to the modeling of initial and induced anisotropy at large deformation
234
Application of the concept of traceability to the management of nuclear data
235
Application of the concept synthetic lethality toward anticancer therapy: A promise fulfilled?
236
Application of the concepts of fracture mechanics to the failure of conductive cracks in piezoelectric ceramics
237
Application of the conductimetry to the study of the transformation of KCl and Na2SO4 into K2SO4 between 5 and 30 °C
238
Application of the constant stoichiometry grouping concept to the Raman spectra of Pb(PO3)2-TeO2 glasses
239
Application of the constrained finite strip method for the buckling design of cold-formed steel columns and beams via the direct strength method
240
Application of the Constrained Interpolation Profile (CIP) scheme to two-dimensional single-phase hydrothermal reservoir simulations
241
Application of the Continuity Equation and Valve Resistance to the Evaluation of St. Jude Medical Prosthetic Aortic Valve Dysfunction
242
Application of the continuous variation method to cooperative interactions: mechanism of Fe(II)–ferrozine chelation and conditions leading to anomalous binding ratios Original Research Article
243
Application of the continuous wavelet transform on the free vibrations of a steel–concrete composite railway bridge
244
Application of the control methods for radiant floor cooling system in residential buildings
245
Application of the controllable series compensator in damping power system oscillations
246
Application of the core-shell-type granulation process for the preparation of compression molding granules containing fibrous material and powders
247
Application of the correlation theory of thermal regime and thermal radio emission for atmosphere
248
Application of the correlation-crystal-field delta-function model in analyses of Pr3+(4f2) energy-level structures in crystalline hosts Original Research Article
249
Application of the Cosford cross-coupling protocol for the stereoselective synthesis of (R)-(+)-goniothalamin, (R)-(+)-kavain and (S)-(+)-7,8-dihydrokavain
250
Application of the cos-Fourier expansion to data transformation between different latitude–longitude grids
251
Application of the COSMO-SAC-BP Solvation Model to Predictions of Normal Boiling Temperatures for Environmentally Significant Substances
252
Application of the coupled channels approach to the intermediate coupling description of photodisintegration of 1d2s-shell nuclei Original Research Article
253
Application of the coupled MIKE SHE/MIKE 11 modelling system to a lowland wet grassland in southeast England
254
Application of the coupled model to the Somme river basin
255
Application of the covering function method in quantum hydrodynamics for two-dimensional scattering problems
256
Application of the CPA equation of state to glycol/hydrocarbons liquid–liquid equilibria
257
Application of the CPA equation of state to organic acids
258
Application of the CPA equation of state to reservoir fluids in presence of water and polar chemicals
259
Application of the Cplex-isoelectronic theory to electrocyclisations, sigmatropic rearrangements, cheletropic reactions and antiaromaticity: Consistent with Santilliʹs hadronic chemistry
260
Application of the crack compliance method to long axial cracks in pipes with allowance for geometrical nonlinearity and shape imperfections (dents)
261
Application of the Cramer rule in the solution of sparse systems of linear algebraic equations
262
Application of the cross entropy method to the GLVQ algorithm
263
Application of the Cubic-Plus-Association (CPA) Equation of State to Complex Mixtures with Aromatic Hydrocarbons
264
Application of the Cubic-Plus-Association (CPA) Equation of State to Cross-Associating Systems
265
Application of the cubic-plus-association (CPA) equation of state to model the fluid phase behaviour of binary mixtures of water and tetrahydrofuran
266
Application of the Cubic-Plus-Association Equation of State to Mixtures with Polar Chemicals and High Pressures
267
Application of the cybernetic approach to price-dependent demand response for underground mining enterprise electricity consumption
268
Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility
269
Application of the cyclic phase transformation concept for investigating growth kinetics of solid-state partitioning phase transformations
270
Application of the cyclic semi-integral voltammetry and cyclic semi-differential voltammetry to the determination of the reduction mechanism of a Ni–porphyrin
271
Application of the Danckwerts method in a bubble column: Effects of surfactants on mass transfer coefficient and interfacial area
272
Application of the Dang-Van criterion for life determination under uniaxial random tension–compression with different mean values
273
Application of the Davidon-Fletcher-Powell algorithm to the resolution of multicomponent mixtures using UV-vis spectrophotometry
274
Application of the DDM and fracture mechanics model on the simulation of rock breakage by mechanical tools
275
Application of the decomposition method to identify the distributed parameters of an elliptical equation
276
Application of the decomposition technique for forecasting the load of a large electric power network
277
Application of the deletion/substitution/addition algorithm to selecting land use regression models for interpolating air pollution measurements in California
278
Application of the denaturing gradient gel electrophoresis (DGGE) technique as an efficient diagnostic tool for ciliate communities in soil
279
Application of the density functional method to study phase transitions in an associating Lennard-Jones fluid adsorbed in energetically heterogeneous slit-like pores
280
Application of the density functional theory derived orbital-free embedding potential to calculate the splitting energies of lanthanide cations in chloroelpasolite crystals
281
Application of the design of experiments procedure to the behaviour of adhesively bonded joints with plastically deformable adherends to enable further understanding of strain rate sensitivity
282
Application of the detrended fluctuation analysis (DFA) method for describing cloud breaking
283
Application of the deuterium tracing method for the estimation of tree sap flow and stand transpiration of a beech forest (Fagus silvatica L.) in a mountainous Mediterranean region
284
Application of the DFT-based embedding scheme using an explicit functional of the kinetic energy to determine the spin density of Mg+ embedded in Ne and Ar matrices
285
Application of the dibromohydroxyphenylfluorone–molybdenum(VI) complex to the sensitive spectrophotometric determination of protein Original Research Article
286
Application of the Difference Gaussian Rules to Solution of Hyperbolic Problems
287
Application of the Difference Gaussian Rules to Solution of Hyperbolic Problems: II. Global Expansion
288
Application of the different boundary elements to spur gears Original Research Article
289
Application of the differential colorimetry and polyphenolic profile to the evaluation of the chromatic quality of Tempranillo red wines elaborated in warm climate. Influence of the presence of oak wood chips during fermentation
290
Application of the differential equations method for identifying communities in sparse networks Original Research Article
291
Application of the differential impedance analysis for investigation of electroceramics
292
Application of the differential transformation method for the solution of the hyperchaotic Rِssler system
293
Application of the differential transformation method to the solution of a damped system with high nonlinearity Original Research Article
294
Application of the Diffusion–Collision Model to the Folding of Three-helix Bundle Proteins
295
Application of the digital moiré method in fracture analysis of a cracked rubber sheet
296
APPLICATION OF THE DIRECT COMPLEX STIFFNESS METHOD TO ENGINE MOUNTS
297
Application of the direct Lyapunov method to improve damping of power swings by control of UPFC
298
Application of the direct quadrature method of moments to polydisperse gas–solid fluidized beds
299
Application of the discontinuity factor theory to accelerate routine rod worth calculations for modular HTRs Original Research Article
300
Application of the discontinuous spectral Galerkin method to groundwater flow
301
Application of the discrete element method for modeling of rock crack propagation and coalescence in the step-path failure mechanism
302
Application of the Discrete Element Method to crack propagation and crack branching in a vitreous dense biopolymer material
303
Application of the Discrete Element Method to crack propagation and crack branching in a vitreous dense biopolymer material
304
Application of the discrete Fourier transform to solving the Cauchy integral equation
305
Application of the dissipated energy criterion to predict fatigue crack growth of Type 304 stainless steel following a tensile overload
306
Application of the distance function to nonmarket valuation of environmental goods and services: An illustrative example
307
Application of the distinct element method and the extended finite element method in modelling cracks and coalescence in brittle materials
308
Application of the distributed activation energy model to the kinetic study of pyrolysis of the fresh water algae Chlorococcum humicola
309
Application of the distributed database (Data-Free-Way) on the analysis of mechanical properties in neutron irradiated 316 stainless steel
310
Application of the distributed dislocation technique for calculating cyclic crack tip plasticity effects
311
Application of the distribution of citations among publications in scientometric evaluations
312
Application of the DLVO theory for particle deposition problems
313
Application of the DNDC model to predict emissions of N2O from Irish agriculture
314
Application of the double intramolecular hetero-Michael addition (DIHMA) approach in spiroketal synthesis: total synthesis of (±)-(4S*,6S*)-4-hydroxy-1,7-dioxaspiro[5.5]undecane, a Dacus oleae olive fly pheromone
315
Application of the double Laplace Adomian decomposition method for solving linear singular one dimensional thermo-elasticity coupled system
316
Application of the Dozier retrieval to wildfire characterization: a sensitivity analysis
317
Application of the DRBEM to model ablation characteristics of a thrust vector control vane
318
Application of the DRS chip for fast waveform digitizing
319
Application of the DRS chip for fast waveform digitizing
320
Application of the DSC model for nonlinear analysis of reinforced concrete frames
321
Application of the DSC-Element method to flexural vibration of skew plates with continuous and discontinuous boundaries
322
Application of the DTC control in the photovoltaic pumping system
323
Application of the dual reciprocity boundary integral equation technique to solve the nonlinear Klein–Gordon equation Original Research Article
324
Application of the dual-CGPS concept to monitoring vertical land movements at tide gauges
325
Application of the dual-kinetic-balance sets in the relativistic many-body problem of atomic structure Original Research Article
326
Application of the Dubois-model using experimental synthetic aperture radar data for the determination of soil moisture and surface roughness
327
Application of the Duplex Reactor—An Unusual and Forgotten Technique to Reduce Short Circuit Duty
328
Application of the duplex TiN coatings to improve the tribological properties of Electro Hydrostatic Actuator pump parts
329
Application of the Dynamic Cone Penetrometer (DCP) for determination of the engineering parameters of sandy soils
330
Application of the dynamic Wilhelmy plate to identification of slippage at a liquid-liquid-solid three-phase line of contact
331
Application of the dynamical flexural resonance technique to industrial materials characterisation
332
Application of the dynamical flexural resonance technique to industrial materials characterisation
333
Application of the EBSD technique for the characterisation of deformation zones in metal cutting
334
Application of the edge of chaos domain of the Zhabotinskii CNN to explore insights to hydrothermal deposit-forming processes
335
Application of the effective potentials technique for investigation of two-dimensional electron mirrors with curvilinear axial trajectory
336
Application of the effective potentials technique for investigation of two-dimensional electron mirrors with curvilinear axial trajectory
337
Application of the EGEM model to predict ephemeral gully erosion in Sicily, Italy
338
APPLICATION OF THE ELASTIC BOUNDARY INDUCED BY SHEAR HISTORY ON SATURATED COHESIVE SOIL
339
Application of the electrochemical machining technique for the characterization of zinc coatings
340
Application of the electrodeposited multilayers amorphous wires in magnetometric sensors
341
Application of the electromeniscus phenomenon to carbon nanotube erection and surface modification
342
Application of the electron channeling contrast imaging technique to the study of dislocations associated with cracks in bulk specimens
343
Application of the electron channeling contrast imaging technique to the study of dislocations associated with cracks in bulk specimens
344
Application of the electron energy loss fine structure technique to the investigation of the Al Ag binary system
345
Application of the electron-counting method to low-Z elemental analysis
346
Application of the electron-counting method to low-Z elemental analysis
347
Application of the electronic nose for uremia diagnosis
348
Application of the electrostatic mean value theorem to electrostatic sensor electrodes
349
Application of the element free Galerkin method to the simulation of plane strain rolling
350
Application of the element-free Galerkin meshless method to 3-D fracture mechanics problems
351
Application of the Elevation and Residual Static Correction methods on a selected Seismic data of West Luhais area in the South of Iraq
352
Application of the elliptic conditional moment closure model to a two-dimensional nonpremixed methanol bluff-body flame
353
Application of the EM algorithm for the multitarget/multisensor tracking problem
354
Application of the emission inventory model TEAM: Uncertainties in dioxin emission estimates for central Europe
355
Application of the EMIT 2000 Tacrolimus assay on the Abbott Architect c8000 high volume clinical chemistry analyzer
356
Application of the empirical mode decomposition and wavelet transform to seismic reflection frequency attenuation analysis
357
Application of the EN 1788 European standard for the control of saffron, pepper and blends
358
APPLICATION OF THE END POINT POLYMERASE CHAIN REACTION METHOD TO THE DETECTION OF CERTAIN MILK-BORNE BACTERIA
359
Application of the endochronic theory of plasticity for life prediction with asymmetric axial cyclic straining of AISI 304 stainless steel
360
Application of the endurance time method in seismic analysis of concrete gravity dams
361
Application of the energy balance method to a nonlinear oscillator arising in the microelectromechanical system (MEMS)
362
Application of the energy flow method to vibration control of buildings with multiple tuned liquid dampers
363
Application of the energy release rate approach for delamination growth in Glare
364
Application of the Englert–Schwinger model to the equation of state and the fullerene molecule
365
APPLICATION OF THE ENVELOPE AND WAVELET TRANSFORM ANALYSES FOR THE DIAGNOSIS OF INCIPIENT FAULTS IN BALL BEARINGS
366
Application of the environmental isotope δ18O to study water flow in unsaturated soils planted with different crops: Case study of a weighable lysimeter from the research field in Neuherberg, Germany
367
Application of the Eötvos and Guggenheim empirical rules for predicting the density and surface tension of ionic liquids analogues
368
Application of the equilibrium theory to ternary moving bed configurations (4+4, 5+4, 8 and 9 zones): II. Langmuir case
369
Application of the equivalency factor concept to the phototoxicity and –genotoxicity of furocoumarin mixtures
370
Application of the ERAS model to HE and VE of 1-alkanol + 1-alkene and 1-alkanol + 1-alkyne mixtures
371
Application of the ERAS-Model to binary mixtures of diethylamine and s-butylamine with acetonitrile in the temperature range (288.15–303.15) K
372
Application of the ERICA Integrated Approach to the Drigg coastal sand dunes
373
Application of the EROSION 3D model to the CATSOP watershed, The Netherlands
374
Application of the error propagation theory in estimates of static formation temperatures in geothermal and petroleum boreholes
375
Application of the essential work of fracture concept to nanostructured polymer materials
376
Application of the essential work of fracture method in ranking the performance in service of high-density polyethylene resins employed in pressure pipes
377
Application of the European flaw assessment procedure SINTAP to thin wall structures subjected to biaxial and mixed mode loadings
378
Application of the European flaw assessment procedure SINTAP to thin wall structures: Analytical assessment levels
379
Application of the European reference soil set (EUROSOILS) to a HPLC-screening method for the estimation of soil adsorption coefficients of organic compounds
380
Application of the european SINTAP procedure to the failure analysis of a broken forklift
381
Application of the evaporative light scattering detector to analytical problems in polymer science
382
Application of the exact muffin-tin orbitals theory: the spherical cell approximation
383
Application of the Exact Operational Matrices Based on the Bernstein Polynomials
384
Application of the exact operational matrices for solving the Emden-Fowler equations, arising in Astrophysics
385
Application of the exergetic cost theory to the LiBr/H2O vapour absorption system
386
Application of the exergy concept in the petroleum refining and petrochemical industry
387
Application of the exergy index as ecological indicator of organically enrichment areas in the Mar Menor lagoon (south-eastern Spain)
388
Application of the -expansion method for the complex KdV equation
389
Application of the experiment design method to the study of the performance of the electrochlorination cells Original Research Article
390
Application of the experimental design of experiments (DoE) for the determination of organotin compounds in water samples using HS-SPME and GC–MS/MS
391
Application of the Exp-function method for solving the combined KdV-mKdV and Gardner-KP equations
392
Application of the explosive method for creating nitrogen layers
393
Application of the extended Brenner potential to the Si(111)7×7:H system I: cluster calculations
394
Application of the extended Brenner potential to the Si(111)7×7:H system: II: periodic calculations
395
Application of the Extended Corresponding States Method to the Calculation of the Ammonia–Water Mixture Thermodynamic Surface
396
Application of the extended Kalman filter to a lysine hydrochlorination process
397
Application of the extended Kantorovich method to the bending of clamped cylindrical panels
398
Application of the Extended Langmuir model to surface tension data of binary liquid mixtures
399
Application of the extended P + Q Q force model to N ~ Z f p shell nuclei
400
Application of the extended P+QQ force model to N≈Z fp shell nuclei Original Research Article
401
Application of the extended pairing model to heavy isotopes
402
Application of the Extended Planned Behavior Theory to Predict COVID-19 Preventive Behaviors
403
Application of the extended RSA models in studies of particle deposition at partially covered surfaces
404
Application of the extended solvation theory to study the interaction of β-CD with interpolymer of PEO and PAA
405
Application of the extraction induced by emulsion breaking for the determination of chromium and manganese in edible oils by electrothermal atomic absorption spectrometry
406
Application of the extraction induced by emulsion breaking for the determination of Cu, Fe and Mn in used lubricating oils by flame atomic absorption spectrometry
407
Application of the extreme learning machine algorithm for the prediction of monthly Effective Drought Index in eastern Australia
408
Application of the Extreme Learning Machine for Modeling the Bead Geometry in Gas Metal Arc Welding Process
409
Application of the factor method to maintenance decision support for stone cladding
410
Application of the factor method to the estimation of the service life of natural stone cladding
411
Application of the factorial design of experiments to biodiesel production from lard
412
Application of the factorization method to the characterization of weak inclusions in electrical impedance tomography
413
Application of the Faddeev-Jackiw formalism to the gauged WZW model
414
Application of the Falcon Concentrator for fine coal cleaning
415
Application of the Fast Controlled Precipitation method to assess the scale-forming ability of raw river waters Original Research Article
416
Application of the fast fourier transform to interpret geoelectric anomalies: Preliminary results
417
Application of the Fast Gauss Transform to Option Pricing
418
Application of the fast multipole method for the evaluation of magnetostatic fields in micromagnetic computations
419
Application of the fast multipole method to hybrid finite element–boundary element models
420
Application of the fault tree analysis for assessment of power system reliability
421
Application of the fault tree analysis for assessment of power system reliability
422
Application of the FCM-based neuro-fuzzy inference system and genetic algorithm-polynomial neural network approaches to modelling the thermal conductivity of alumina–water nanofluids
423
Application of the feature selection method to discriminate digitized wheat varieties
424
Application of the feature-detection rule to the Negative Selection Algorithm
425
Application of the FEM for the prediction of the surface layer characteristics after shot peening
426
Application of the FEM with adaptivity for electromagnetic inverse medium scattering problems
427
Application of the Fenton process to the dissolution and mineralization of ion exchange resins
428
Application of the ferroelectric materials to ULSI memories
429
Application of the FETI method to ASCI problems - scalability results on 1000 processors and discussion of highly heterogeneous problems
430
Application of the Feynman–Kac path integral method in finding excited states of quantum systems Original Research Article
431
Application of the Feynman-Kac path integral method in finding the ground state of quantum systems Original Research Article
432
Application of the field emitter array to the vacuum measurements
433
Application of the field method to the non-linear theory of vibrations
434
Application of the field theoretic method of Bohm and Pines to the determination of the activity coefficients of strong 1:1 electrolytes
435
Application of the fields of objects formed on the basis of unit tensor objects to describe the tensile and compression failure stresses of pine wood in the principal orthotropy plane
436
Application of the final state Auger parameter imperfect screening model for the Si L VV spectrum of porous silicon
437
Application of the finite element method for localized failure analysis in dynamic loading
438
Application of the finite element method in self-consistent relativistic mean field calculations Original Research Article
439
Application of the finite element method in the tensileshear test of adhesive technology
440
Application of the finite element method in the tensile-shear test of adhesive technology
441
Application of the finite element method to gravity data case study: Western Turkey
442
Application of the Finite Element Method to mixed-mode cyclic crack propagation calculations in specimens
443
Application of the finite element method to predict microstructure evolution in the hot forging of steel
444
Application of the finite element method to predict the crashworthy response of a metallic helicopter under floor structure onto water
445
Application of the finite volume method and unstructured meshes to linear elasticity
446
Application of the finite volume method to the radial conduction model of the CATHENA code
447
Application of the finite-element method to improve the quasi-exact reinforcement theory of fibrous polymeric composites
448
Application of the finite-element method to the vibration of a rectangular plate with elastic support at the boundary
449
Application of the first combustion model to spray combustion
450
Application of the first combustion model to spray combustion
451
Application of the flash method for the thermal characterisation of woven carbon fibre laminates
452
Application of the flexibility influence function method in the dynamic analysis of composite beams
453
Application of the flow field flow fractionation (FFFF) to the characterization of aquatic humic colloids: evaluation and optimization of the method
454
Application of the flowsheet simulation concept to fluidized bed reactor modeling. Part I: Development of a fluidized bed reactor simulation module
455
Application of the flowsheet simulation concept to fluidized bed reactor modeling. Part II—Application to the selective oxidation of n-butane to maleic anhydride in a riser/regenerator system
456
Application of the fold plication method for unilateral lung volume reduction in pulmonary emphysema
457
Application of the Force Balance Model and Fractal Scaling Analysis for Size Estimation of the Complex-Agglomerates in a Conical Fluidized Bed
458
Application of the forest–soil–water model (PnET-BGC/CHESS) to the Lysina catchment, Czech Republic
459
Application of the forest–soil–water model (PnET-BGC/CHESS) to the Lysina catchment, Czech Republic
460
Application of the forming limit stress diagram to forming limit prediction for the multi-step forming of auto panels
461
Application of the forsol model to the spruce site at Solling, Germany
462
Application of the forsol model to the spruce site at Solling, Germany
463
Application of the four-component Ugi condensation for the preparation of sulfated glycoconjugate libraries
464
Application of the fractional differential transform method to fractional-order integro-differential equations with nonlocal boundary conditions
465
Application of the Fractional Statistical Theory of Adsorption (FSTA) to Adsorption of Linear and Flexible k-mers on Two-Dimensional Surfaces
466
Application of the fragment molecular orbital method for determination of atomic charges on polypeptides
467
Application of the fragment molecular orbital method for determination of atomic charges on polypeptides. II. Towards an improvement of force fields used for classical molecular dynamics simulations
468
Application of the Freshness Quality Index (K Value) for Fresh Fish to Canned Sardines from Northwestern Mexico
469
Application of the Freundlich adsorption isotherm in the characterization of molecularly imprinted polymers
470
Application of the Freundlich adsorption isotherm in the characterization of molecularly imprinted polymers Original Research Article
471
Application of the frozen Gaussian approximation to the photodissociation of CO2
472
Application of the fulcrum axis to estimate the central scapular axis
473
Application of the full factorial design to optimization of base-catalyzed sunflower oil ethanolysis
474
Application of the full spectrum correlated-k distribution approach to modeling non-gray radiation in combustion gases
475
Application of the fully automatic 3D hp adaptive code to orthotropic heat transfer in structurally graded material properties
476
Application of the fundamental solutions by Ganowicz in a static analysis of Reissner’s plates by the boundary element method
477
Application of the fuzzy ART/MAP and MinMax/MAP neural network models to radiographic image classification
478
Application of the fuzzy ARTMAP neural network model to medical pattern classification tasks
479
Application of the fuzzy inference system to evaluate the quality of air textured warp yarn
480
Application of the fuzzy–stochastic methodology to appraising the firm value as a European call option
481
Application of the G′/G-expansion method for nonlinear diffusion equations with nonlinear source
482
Application of the Galerkin-FEM and the improved four-pole parameter method to predict acoustic performance of expansion chambers
483
Application of the GALI method to localization dynamics in nonlinear systems
484
Application of the gas production technique to feed evaluation systems for ruminants
485
Application of the Gauss theorem to the study of silicic calderas: The calderas of La Primavera, Los Azufres, and Los Humeros (Mexico)
486
Application of the GCA-EoS model to the supercritical processing of fatty oil derivatives Original Research Article
487
Application of the general method of Lyapunov functionals construction for difference Volterra equations
488
Application of the general microstructural model to erosion phenomena — mechanisms for the chemical–hydrodynamic conversion of bentonite to a pumpable slurry in conjunction with retrieval
489
Application of the general rate model and the generalized Maxwell–Stefan equation to the study of the mass transfer kinetics of a pair of enantiomers
490
Application of the General Stability Index method to assess the quality of butter lettuce during postharvest storage using a multi-quality indices analysis Original Research Article
491
Application of the general stability index method to predict quality deterioration in bighead carp (Aristichthys nobilis) heads during storage at different temperatures Original Research Article
492
Application of the generalised SAFT-VR approach for long-ranged square-well potentials to model the phase behaviour of real fluids
493
Application of the generalized differential quadrature rule to initial–boundary-value problems
494
Application of the generalized finite difference method to solve the advection–diffusion equation
495
Application of the generalized mean value function to the statistical detection of water in decane by near-infrared spectroscopy
496
Application of the generalized Pareto distribution to extreme value analysis in wind engineering
497
Application of the generalized Pareto distribution to extreme value analysis in wind engineering
498
Application of the generalized perturbation-based stochastic boundary element method to the elastostatics
499
Application of the generalized Polynomial Chaos expansion to the simulation of an internal combustion engine with uncertainties
500
Application of the generalized-α method to the time integration of the cable dynamics equations Original Research Article
501
Application of the genetic algorithm and downhill simplex methods (Nelder–Mead methods) in the search for the optimum chiller configuration
502
Application of the genetic algorithm and simulated annealing to LC filter tuning
503
Application of the genetic algorithm in modeling RF on-chip inductors
504
Application of the Genetic Algorithm to Calculate the Interaction Parameters for Multiphase and Multicomponent Systems
505
Application of the geometric technique of calculating syzygies to Rees algebras
506
Application of the Geostationary Ocean Color Imager (GOCI) to mapping the temporal dynamics of coastal water turbidity
507
Application of the Gillette model for windblown dust at Owens Lake, CA
508
Application of the glass slab optical waveguide to the spectrophotometric determination of the iron (II)—1, 10-phenanthroline complex by flow analysis
509
Application of the Global Positioning System to the measurement of overhead power transmission conductor sag
510
Application of the Godunov Type Corrective Smoothed Particle Method to Impulsive Load Studies
511
Application of the Gompertz Method for Evaluating Survival Gains in Patients Receiving Cardiac Resynchronization Therapy
512
Application of the Gould–Jacobs reaction to 4-amino-2,1,3-benzoselenadiazole
513
Application of the GRAAL model to leaching experiments with SON68 nuclear glass in initially pure water
514
Application of the grade-recovery curve in the batch flotation of Polish copper ore
515
Application of the graph theory and matrix methods to contractor ranking
516
Application of the Green functions to the problem of the thermally induced vibration of a beam
517
Application of the Grounded Theory Method to Identify and Analyze the Factors Affecting Successful Marketing of Iranian Organic Agricultural Products
518
Application of the group contribution concept to Kihara potential for estimating thermodynamic and transport properties: Part VI. Heavy globular molecules (SF6, MoF6, WF6, UF6, C(CH3)4, Si(CH3)4)
519
Application of the GRP scheme to open channel flow equations
520
Application of the GTN Model in Ductile Fracture Prediction of 7075-T651 Aluminum Alloy
521
Application of the Guggenheim, Anderson and De Boer model to correlate water activity and moisture content during osmotic dehydration of apples
522
Application of the GV-MSA model to the electrolyte solutions containing mixed salts and mixed solvents
523
Application of the harmonic balance method to a nonlinear oscillator typified by a mass attached to a stretched wire
524
Application of the harmonic balance method to ground moling machines operating in periodic regimes
525
Application of the harmony search algorithm to calculate the interaction parameters in liquid–liquid phase equilibrium modeling
526
Application of the Hartley transform for interpretation of gravity anomalies in the Shamakhy–Gobustan and Absheron oil- and gas-bearing regions, Azerbaijan
527
Application of the Hartman–Schijve equation to represent Mode I and Mode II fatigue delamination growth in composites
528
APPLICATION OF THE HBMO APPROACH TO PREDICT THE TOTAL SEDIMENT DISCHARGE
529
Application of the headspace CO2 method (ISO 14 593) to the assessment of the ultimate biodegradability of surfactants: results of a calibration exercise
530
Application of the health belief model and social cognitive theory for osteoporosis preventive nutritional behaviors in a sample of Iranian women
531
Application of the Health Belief Model for Investigation of Couples' Attitude toward Sexual Health
532
Application of the Health Belief Model in Breast Self-Examination by Iranian Female University Students
533
Application of the Health Belief Model in Promotion of Self-Care in Heart Failure Patients
534
Application of the Health Promotion Model to Predict Breakfast Consumption Among Adolescent Girls: A Structural Equation Modeling Approach
535
Application of the health promotion model to predict stages of exercise behaviour in Iranian adolescents
536
Application of the HeapSim model to the heap bioleaching of the Pueblo Viejo ore deposit
537
Application of the heat equation to the calculation of temperature rises from pulsed microwave exposure
538
Application of the Heck reaction in the synthesis of truncated naphthoic acid retinoids
539
Application of the Hereditary Theory of Strength in Predicting the Fatigue Failure of Composites
540
Application of the hexokinase-glucose-6-phosphate dehydrogenase enzymatic assay for measurement of glucose in amended soil
541
Application of the hexokinase-glucose-6-phosphate dehydrogenase enzymatic assay for measurement of glucose in amended soil
542
Application of the HGPT methodology of reactor operation problems with a nodal mixed method
543
Application of the high performance computing techniques of parflow simulator to model groundwater flow at Azraq basin
544
Application of the High Risk Model of Threat Perception to Medical Illness and Service Utilization in a Family Practice.
545
Application of the high-performance liquid chromatography method with coulometric detection for determination of vitamin B6 in human plasma and serum
546
Application of the high-spin isomer beams to the secondary fusion reaction and the measurement of g-factor Original Research Article
547
Application of the high-temperature Kelvin probe for in situ monitoring of the charge transfer at the oxygen/zirconia interface. Oxygen chemisorption isobar Original Research Article
548
Application of the holographic carrier fringe and FFT technique for deformation measurement
549
Application of the Homotopy Analysis Method to Fractional Order Gas Dynamics Equation
550
Application of the homotopy analysis method to the Poisson–Boltzmann equation for semiconductor devices
551
Application of the homotopy perturbation method for the solution of inverse heat conduction problem
552
Application of the homotopy perturbation method to Zakharov Kuznetsov equations
553
Application of the Hot Spotting Method for the Straightening of a Large Turbine Rotor
554
Application of the HOTWAXS detector for imaging at higher X-ray energies (10–30 keV)
555
Application of the HOTWAXS detector for imaging at higher X-ray energies (10–30 keV)
556
Application of the Hough Transform for Seed Row Localisation using Machine Vision
557
Application of the HPLC-screening method for the determination of the adsorption coefficient on sewage sludges
558
Application of the H-point standard addition method to the speciation of Fe(II) and Fe(III) with chromogenic mixed reagents
559
Application of the Human Factors Analysis and Classification System Methodology to the Cardiovascular Surgery Operating Room
560
Application of the hybrid complexation-ultrafiltration process for removal of metal ions from galvanic wastewater
561
Application of the Hybrid Finite Element Mixing Cell method to an abandoned coalfield in Belgium
562
Application of the hybrid genetic-simplex algorithm for deconvolution of electrochemical responses in SDLSV method
563
APPLICATION OF THE HYBRID HARMONY SEARCH WITH SUPPORT VECTOR MACHINE FOR IDENTIFICATION AND CALSSIFICATION OF DAMAGED ZONE AROUND UNDERGROUND SPACES
564
Application of the Hybridized Discontinuous Galerkin Method for Solving One-Dimensional Coupled Burgers Equations
565
Application of the hydrogen microprint and the microautoradiography techniques to a duplex stainless steel
566
Application of the Hydrogen-Permeation Method to the Study of Carbide Precipitation Kinetics in a Low-Carbon Martensite
567
Application of the hydrologic visibility concept to estimate rainfall measurement quality of two planned weather radars
568
Application of the hydrophile–lipophile balance concept to the classification of demulsifiers and bituminous froth and its components
569
Application of the IEAF-2001 activation data library to activation analyses of the IFMIF high flux test module
570
Application of the Image Processing Method and the Beer-Lambert Law for Assessing Sea Water Intrusion in Rivers
571
Application of the impedance coupling method and the equivalent rotor model in rotordynamics
572
APPLICATION OF THE IMPROVED FINITE ELEMENT-FAST MULTIPOLE METHOD ON LARGE SCATTERING PROBLEMS
573
APPLICATION OF THE IMPROVED MATRIX TYPE FDTD METHOD FOR ACTIVE ANTENNA ANALYSIS
574
Application of the improved regression method to derive ΔGf0 of non-stoichiometric clay minerals and their correlations with compositional parameters
575
Application of the incomplete Cholesky factorization preconditioned Krylov subspace method to the vector finite element method for 3-D electromagnetic scattering problems Original Research Article
576
Application of the index of marsh bird community integrity to coastal wetlands of Georgian Bay and Lake Ontario, Canada
577
Application of the induced generalized averaging hybrid aggregation operators using interval-valued Pythagorean fuzzy environment
578
Application of the induction plasma to the synthesis of two dimensional steam methane reforming Ni/Al2O3 catalyst
579
Application of the infinite matrix theory to the solvability of a system of differential equations
580
Application of the information theory to the description of the phosphorus compounds reduction at a sewage treatment plant
581
Application of the Inhomogeneous Sample Model in Piezoelectric Photothermal Spectroscopy of Zn1-x BexTe and Cd1-xMnxTe Mixed Crystals
582
Application of the injection modeling approach to power flow analysis for systems with unified power flow controller
583
Application of the integral bifurcation method for solving modified Camassa–Holm and Degasperis–Procesi equations Original Research Article
584
Application of the integrated framework for the plant layout evaluation problem
585
Application of the integrated reliability analysis system (IRAS)
586
Application of the integrated safety analysis code system (ISAS) for ITER
587
Application of the integrated safety assessment methodology to the protection of electric systems
588
Application of the Integrated TH-PA Method to the Westinghouse AP600 Design
589
Application of the integro-moment method to steady-state two-dimensional rarefied gas flows subject to boundary induced discontinuities
590
Application of the interfacial indentation test for adhesion toughness determination
591
Application of the interference standard method for the determination of sulfur, manganese and iron in foods by inductively coupled plasma mass spectrometry Original Research Article
592
Application of the interleaved comb chopper to time-of-flight electron spectrometry
593
Application of the intermediate Hamiltonian valence-universal coupled-cluster method to atomic systems with one valence electron
594
Application of the internal friction method to studying microstructural effects in fusion materials
595
Application of the internal time operators for the Renyi map
596
Application of the interphase power controller technology for transmission line power flow control
597
Application of the intramolecular aza-Wittig reaction to the synthesis of pyrido[2,3-d]pyrimidines
598
Application of the intramolecular PIFA-mediated amidation of alkynes to the synthesis of substituted indolizidinones
599
Application of the intuitive k-NN Estimator for prediction of the Marshall Test (ASTM D1559) results for asphalt mixtures
600
Application of the inundation area—lake level rating curves constructed from the SRTM DEM to retrieving lake levels from satellite measured inundation areas
601
Application of the invariant subspace method in conjunction with the fractional Sumudu’s transform to a nonlinear conformable timefractional dispersive equation of the fifth order
602
APPLICATION OF THE INVASIVE WEED OPTIMIZATION TECHNIQUE FOR ANTENNA CONFIGURATIONS
603
Application of the inverse elasticity problem to identify irregular interfacial configurations
604
Application of the inverse Kirkendall model of radiation-induced segregation to ferritic–martensitic alloys
605
Application of the inverse method to the estimation of heat flux and temperature on the external surface in laminar pipe flow
606
Application of the ionless tripod polisher to the preparation of YBCO superconducting multilayer and bulk ceramics thin films
607
Application of the ionless tripod polisher to the preparation of YBCO superconducting multilayer and bulk ceramics thin films
608
Application of the IPCC model to a Brazilian landfill: First results
609
Application of the Irrigation Land Environmental Evaluation Tool for flood irrigation management and evaluation of water use
610
Application of the ISM EoS for polymer melts
611
Application of the ISM EoS for polymer solutions and blends
612
Application of the ISO 13472-1 in situ technique for measuring the acoustic absorption coefficient of grass and artificial turf surfaces
613
Application of the isopycnic kinetic plot method for elucidating the potential of sub-2 µm and core–shell particles in SFC
614
Application of the iterative solution method with Schur complement reduction to mixed finite elements based in a tetrahedral discretization
615
Application of the IWA ADM1 model to simulate anaerobic co-digestion of organic waste with waste activated sludge in mesophilic condition
616
Application of the J matrix method for describing the (e, 3e) reaction in the helium atom
617
Application of the Jameson Cell technology for algae and phosphorus removal from maturation ponds
618
Application of the Josephson effect to voltage metrology
619
Application of the Just-In-Time Approach to a Third-Generation Port
620
Application of the J-walking formalism to the test particle method: adsorption isotherms for atomic monolayers
621
Application of the k– turbulence model to the high Reynolds number skimming flow field of an urban street canyon
622
Application of the Kalman-Bucy filter in the stochastic differential equations for the modeling of rl circuit
623
Application of the Kamlet and Taft model in solvent extraction chemistry of metals Original Research Article
624
Application of the KD Concept to the Study of Trace Metal Removal and Desorption During Estuarine Mixing
625
Application of the killer-tree heuristic and the lambda-search method to lines of action
626
Application of the Kincaid-Cohen method to a binary gas-liquid system
627
Application of the Kineros2 rainfall–runoff model to an arid catchment in Oman
628
Application of the Kirkwood–Buff formalism to CH3(CH2)n−1OH + polyether mixtures for n = 1, 2, 3
629
Application of the Kocks–Mecking model to tensile deformation of an austenitic 25Cr–19Ni steel Original Research Article
630
Application of the kohonen neural network in coastal water management: methodological development for the assessment and prediction of water quality
631
Application of the Kolmogorov–Zurbenko filter and the decoupled direct 3D method for the dynamic evaluation of a regional air quality model
632
Application of the Kramers Kronig relations to locally resolved impedance data of polymer electrolyte fuel cells
633
Application of the Krylov–Bogoliubov–Mitropolsky method to weakly damped strongly non-linear planar Hamiltonian systems
634
Application of the Kudryashov method and the functional variable method for the complex KdV equation
635
Application of the k–ω turbulence model for a wind-induced vibration study of 2D bluff bodies
636
Application of the Lamel model for simulating cold rolling texture in molybdenum sheet Original Research Article
637
Application of the landscape development intensity (LDI) index in wetland mitigation banking
638
Application of the landscape development intensity (LDI) index in wetland mitigation banking
639
APPLICATION OF THE LAPLACE ADOMIAN DECOMPOSITION AND IMPLICIT METHODS FOR SOLVING BURGERS EQUATION
640
Application of the Laplace decomposition method for solving linear and nonlinear fractional diffusion–wave equations
641
Application of the Laplace transform dual reciprocity boundary element method in the modelling of laser heat treatments
642
Application of the large angle convergent beam electron diffraction technique to the characterisation of martensitic phases in Cu–Zn–Al alloys
643
Application of the large angle convergent beam electron diffraction technique to the characterisation of martensitic phases in Cu–Zn–Al alloys
644
Application of the laser ablation for conservation of historical paper documents
645
Application of the laser pyrolysis to the synthesis of SiC, TiC and ZrC pre-ceramics nanopowders
646
Application of the lattice Boltzmann method combined with large-eddy simulations to turbulent convective heat transfer
647
Application of the lattice Boltzmann method for solving the energy equation of a 2-D transient conduction–radiation problem
648
Application of the lattice Boltzmann method to two-phase Rayleigh–Benard convection with a deformable interface
649
Application of the Lattice-Boltzmann method to the modeling of population blob dynamics in 2D porous domains
650
Application of the LBET class adsorption models to analyze influence of production process conditions on the obtained microporous structure of activated carbons
651
Application of the LBET class adsorption models to the analysis of microporous structure of the active carbons produced from biomass by chemical activation with the use of potassium carbonate
652
Application of the LBET class models with the original fluid state model to an analysis of single, double and triple carbon dioxide, methane and nitrogen adsorption isotherms
653
Application of the Le Chatelier principle on gas reactions
654
Application of the least squares algorithm to the observer design for linear time-varying systems
655
Application of the least trimmed squares technique to prototype-based clustering
656
Application of the Leray–Schauder alternative to nonlinear singular operator equations Original Research Article
657
APPLICATION OF THE LES METHOD TO THE OSCILLATING FLOW PAST A CIRCULAR CYLINDER
658
Application of the level set method for multi-phase flow computation in fusion engineering
659
Application of the level set method to the finite element solution of two-phase flows
660
Application of the level set method to the simulation of resin transfer molding
661
Application of the level-set method to the analysis of an evolving microstructure
662
Application of the LICON methodology to a low-alloy ferritic steel
663
Application of the Lie Symmetry Analysis for Scond-order Fractional Differential Equations
664
Application of the Life Cycle Assessment methodology to agricultural production: an example of sugar beet production with different forms of nitrogen fertilisers
665
Application of the lifting wavelet to rough surfaces
666
Application of the Limit of Truncated Isotonic Regression in Optimization Subject to Isotonic and Bounding Constraints
667
Application of the linear isotherm regularity to selected fluid systems
668
Application of the linear principle for the strongly-correlated variables: Calculations of differences between spectra
669
Application of the linear/exponential hybrid force field scaling scheme to the bond length alternation modes of polyacetylene
670
Application of the Lippmann electrocapillary equation to adsorption potential shift at the air/solution interface – Analysis for undissociated n-decanoic acid
671
Application of the littoral cell concept to managing a protected atoll: Palmyra Atoll National Wildlife Refuge
672
Application of the load flow and random flow models for the analysis of power transmission networks
673
Application of the load flow and random flow models for the analysis of power transmission networks
674
Application of the local fracture stress model on the cleavage fracture of the reactor pressure vessel steels in the transition temperature region
675
Application of the local strain approach on a rolling point contact model
676
Application of the local-to-global approach to the study of infilled frame structures under seismic loading
677
Application of the local-to-global approach to the study of infilled frame structures under seismic loading Original Research Article
678
Application of the log-normal and normal distributions to stormwater quality parameters
679
Application of the long chain diol index (LDI) paleothermometer to the early Pleistocene (MIS 96)
680
Application of the low frequency Raman modes for size determination of gold nanoclusters in gold-based catalytic beds
681
Application of the low vacuum scanning electron microscope to the study of biomaterials and mammalian cells
682
Application of the luciferase cell culture bioassay for the detection of refined petroleum products
683
Application of the luminescence single-aliquot technique for dose estimation in the Marmara Sea
684
Application of the luminol chemiluminescence reaction for the determination of nine corticosteroids Original Research Article
685
Application of the lumped mass technique in dynamic analysis of a flexible L-shaped structure under moving loads
686
Application of the Lux-Fluoro test as bioassay for combined genotoxicity and cytotoxicity measurements by means of recombinant Salmonella typhimurium TA1535 cells
687
Application of the Lux-Fluoro test as bioassay for combined genotoxicity and cytotoxicity measurements by means of recombinant Salmonella typhimurium TA1535 cells Original Research Article
688
Application of the Lyapunov exponent to detect noise-induced chaos in oscillating microbial cultures
689
Application of the magic model to the Norway spruce stand at Solling, Germany
690
Application of the magic model to the Norway spruce stand at Solling, Germany
691
Application of the Mandarin Chinese Version of the Voice Handicap Index
692
Application of the Marginal Beta-Binomial Model in Estimation the Overall Odds of Obesity Among Iranian Adults: Meta-Analysis Method
693
Application of the mass transfer model for describing nonequilibrium transport of HOCs through natural geosorbents
694
Application of the master curve to inhomogeneous ferritic/martensitic steel
695
Application of the material force method to isotropic continuum damage
696
Application of the material force method to thermo-hyperelasticity Original Research Article
697
Application of the material point method in the modeling of arching effects behind retaining walls with active movements
698
APPLICATION OF THE MATHEMATICAL THEORY OF EXPERIMENT TO THE PROBLEM OF MEASURING NONUNIFORM RESIDUAL STRESSES BY THE HOLE DRILLING METHOD
699
APPLICATION OF THE MATHEMATICAL THEORY OF EXPERIMENT TO THE PROBLEM OF MEASURING RESIDUAL MECHANICAL STRESSES INDUCED BY DRILLING
700
APPLICATION OF THE MATHEMATICAL THEORY OF EXPERIMENT TO THE PROBLEM OF MEASURING RESIDUAL MECHANICAL STRESSES INDUCED BY DRILLING
701
Application of the maximal entropy production principle to rapid solidification: A multi-phase-field model Original Research Article
702
Application of the maximal entropy production principle to rapid solidification: A sharp interface model Original Research Article
703
Application of the maximum driving force concept for solid-state partitioning phase transformations in multi-component systems Original Research Article
704
Application of the maximum entropy method in texture analysis
705
Application of the maximum entropy method to absorption kinetic rate processes Original Research Article
706
Application of the McMurry coupling reaction in the synthesis of tri- and tetra-arylethylene analogues as potential cancer chemotherapeutic agents Original Research Article
707
Application of the Medipix2 technology to space radiation dosimetry and hadron therapy beam monitoring
708
Application of the Medipix2 technology to space radiation dosimetry and hadron therapy beam monitoring
709
Application of the Medium Covariance Functions to Travel-time Tomography
710
Application of the membrane biological reactor system for combined sanitary and industrial wastewater treatment
711
Application of the meshless Galerkin boundary node method to potential problems with mixed boundary conditions
712
Application of the metabolic enthalpy change in studies of soil microbial activity
713
Application of the method of acoustic emission to the evaluation of the influence of mechanical cycling on the kinetics of fracture and the crack-growth resistance of A3 structural steel
714
Application of the Method of Base Diagrams for the Prediction of Long-Term Strength in Notched Specimen Tests
715
Application of the method of characteristics to crystallizer simulation and comparison with finite difference for controller performance evaluation
716
Application of the method of continued fractions to electron scattering by polyatomic molecules Original Research Article
717
Application of the method of fundamental solutions and radial basis functions for inverse heat source problem in case of steady-state
718
Application of the method of fundamental solutions and radial basis functions for inverse transient heat source problem Original Research Article
719
Application of the method of fundamental solutions for designing the optimal shape in heat transfer
720
Application of the method of images in the problems of transition radiation in a dihedral angle
721
Application of the method of lines to unsteady compressible Euler equations
722
Application of the method of multiple scales for nonlinear vibration analysis of mechanical systems with dry and lubricated clearance joints
723
Application of the method of simplest equation for obtaining exact traveling-wave solutions for two classes of model PDEs from ecology and population dynamics
724
Application of the method of temporal moments to interpret solute transport with sorption and degradation
725
Application of the methodology to estimate the energy-ecologic efficiency of fluidized bed boilers
726
Application of the methods of fourier optics for quantitative analysis of the evolution of structural states of metals under conditions of cyclic loading
727
Application of the Methylated Markers (Spectrin Beta and DEAD-Box Protein) for Definitive Differentiation Between Fresh and Aged Semen by evaluating Their Role in Identifying Semen From Mixed Body Fluids
728
Application of the MFS to inverse obstacle scattering problems
729
Application of the microboudin method to palaeodifferential stress analysis of deformed impure marbles from Syros, Greece: Implications for grain-size and calcite-twin palaeopiezometers
730
Application of the microelectrode technique to the kinetic study of lithium deposition/dissolution and alloying in organic solutions
731
Application of the micro-genetic algorithm to the design of spatial filters with frequency-selective surfaces embedded in dielectric media
732
Application of the Microtox® test and pollution indices to the study of water toxicity in the Albufera Natural Park (Valencia, Spain)
733
Application of the Milan System for Reporting Salivary Gland Cytology: A Prospective Study
734
Application of the Miller cycle to reduce NOx emissions from petrol engines
735
Application of the Miller cycle to reduce NOx emissions from petrol engines
736
Application of the Minimax Control Chartfor multivariate manufacturing process
737
Application of the minimum transport velocity model for drag-reducing polymers
738
Application of the Min-Projection and the Model PredictiveStrategies for Current Control of Three-Phase Grid- Connected Converters: A Comparative Study
739
Application of the mixed approximation to the solution of two-dimensional problems of the theory of small elastoplastic strains using the finite element method
740
Application of the mixed finite-element method to rotor blade modal reduction
741
Application of the model fiwald to the Solling spruce site
742
Application of the model fiwald to the Solling spruce site
743
Application of the model forsum to the Solling spruce site
744
Application of the model forsum to the Solling spruce site
745
Application of the model niccce to the Solling spruce site
746
Application of the model niccce to the Solling spruce site
747
Application of the model nucsam to the Solling spruce site
748
Application of the model nucsam to the Solling spruce site
749
Application of the modeling method to the calculation of the probability of hitting a stationary target during the fire action of a tank squad in defense
750
Application of the modelling power approach to variable subset selection for GA-PLS QSAR models Original Research Article
751
Application of the Modern Taylor Series Method to a multi-torsion chain
752
Application of the Modified Biochar from Sewage Sludge for Removal of Pb(II) from Aqueous Solution: Kinetics, Equilibrium and Thermodynamic Studies
753
Application of the modified damage index method to timber beams
754
Application of the modified damage index method to timber beams
755
Application of the modified feed formulation to optimize economic and environmental criteria in beef cattle fattening systems with food by-products
756
Application of the modified infinite element method to two-dimensional transient acoustic radiation
757
Application of the modified linear isotherm regularity equation of state to long chain amines and esters
758
Application of the Modified Log-Wake Law in Open-Channels
759
Application of the modified quasichemical model to solutions with strong short-range ordering
760
Application of the modified Tobin’s q to an uncertain energy-saving project with the real options concept
761
Application of the modified water-only cyclone for cleaning fine coals in a Turkish washery, and comparison of its performance results with those of spiral and flotation
762
Application of the MoDrY model for the estimation of potato yielding
763
Application of the modulated temperature differential scanning calorimetry technique for the determination of the specific heat of copper nanofluids
764
Application of the Mohid-2D model to a mesotidal temperate coastal lagoon
765
Application of the molecular mechanics method to simulation of buckling of single-walled carbon nanotubes
766
Application of the moment scheme of the finite element method to the solution of problems with initial stresses in the incremental elasticity theory
767
Application of the Monkman–Grant law to the creep fracture of nodular cast irons with various matrix compositions and structures
768
Application of the mono/multilayer and adsorption potential theories to coal methane adsorption isotherms at elevated temperature and pressure Original Research Article
769
Application of the monoliths in DeNOx catalysis
770
Application of the Monte Carlo method to develop a model to estimate the internal contamination of pipes in a nuclear reactor
771
Application of the Monte Carlo method to develop a model to estimate the internal contamination of pipes in a nuclear reactor
772
Application of the Monte Carlo Method to Prediction of Dispersibility of Graphene in Various Solvents
773
Application of the MSA to the modeling of the activity coefficients of individual ions
774
Application of the multi-agent approach in production planning ، modelli
775
Application of the Multicenter Automatic Defibrillator Implantation Trial II Risk Score in a Nontrial Setting
776
Application of the multi-criteria decision method ELECTRE III for the Weapon selection
777
Application of the Multi-Current Transient Hot-Wire Technique for Absolute Measurements of the Thermal Conductivity of Glycols
778
Application of the multigroup CN method to the calculation of the albedo of a semi-infinite medium
779
Application of the multi-laminate sub-loading surface model in the simulation of a pipe-jacking operation
780
Application of the Multilayer Analysis to Contaminant Transport along Porous Media Flow with Variable Coefficients and two-input Sources
781
Application of the multi-level current reinjection concept to HVDC transmission
782
Application of the multi-level time-harmonic fast multipole BEM to 3-D visco-elastodynamics
783
Application of the Multiplicative-Additive Model in the Bone Marrow Transplantation Survival Data Including Competing Risks
784
Application of the multispecimen palaeointensity method to Pleistocene lava flows from the Trans-Mexican Volcanic Belt
785
Application of the multistage homotopy perturbation method to some dynamical systems
786
Application of the multistage homotopy-perturbation method to solve a class of hyperchaotic systems
787
Application of the multivariate spectral weather generator to the contiguous United States
788
Application of the NASA Scatterometer (NSCAT) for Determining the Daily Frozen and Nonfrozen Landscape of Alaska
789
Application of the NASA/JSC Whipple shield ballistic limit equations to dual-wall targets under hypervelocity impact
790
Application of the natural element method to finite deformation inelastic problems in isotropic and fiber-reinforced biological soft tissues Original Research Article
791
Application of the needle algorithm for exploratory analysis and resolution of HPLC-DAD data
792
Application of the needle penetration test to a calcarenite, Maastricht, the Netherlands
793
Application of the Neganov–Luke effect to low-threshold light detectors
794
Application of the Neganov–Luke effect to low-threshold light detectors
795
Application of the negative staining technique to both aqueous and organic solvent solutions of polymer particles
796
Application of the negative-dimension approach to massless scalar box integrals Original Research Article
797
Application of the Nernst–Planck approach to model the electrodialytic recovery of disodium itaconate
798
Application of the nested grid STEM to an early summer acid rain in South Korea
799
Application of the network simulation method to study the electrical response of ion-exchange membrane systems to pulsed electric fields Original Research Article
800
Application of the Neural Decision Tree approach for prediction of petroleum production
801
Application of the neural network method in optimization of the drawing process of hemispherical parts made from metal sheets
802
Application of the new C18 speedisks™ to the analysis of polychlorinated dibenzo-p-dioxins and dibenzofurans in water and effluent samples
803
Application of the new extended (G /G) -expansion method to find exact solutions for nonlinear partial differential equation
804
Application of the new MultiTrans SP3 radiation transport code in BNCT dose planning
805
Application of the new perturbation method to predict densities of single electrolyte aqueous solutions
806
Application of the new solution ACTIDisc® on secondary effluent reclamation in Castellón de la Plana Original Research Article
807
Application of the new vanishing interfacial tension technique to evaluate miscibility conditions for the Terra Nova Offshore Project
808
Application of the Newton Method for Calculating the Axisymmetric Thermoelastoplastic State of Flexible Laminar Branched Shells Using the Shear Model
809
APPLICATION OF THE NEWTON METHOD TO IMPROVE THE ACCURACY OF TOA ESTIMATION WITH THE BEAMFORMING ALGORITHM AND THE MUSIC ALGORITHM
810
Application of the NMR-tomography technique for groundwater investigations in Equatorial Africa: a case-history in Guinea
811
Application of the noising method to the travelling salesman problem
812
Application of the nonlocal Darcy law to the propagation of nonlinear thermoelastic waves in fluid saturated porous media
813
Application of the Non-Orthogonal Laguerre-L² Basis to the Calculation of Electron-Helium Scattering at Intermediate Energy
814
Application of the non-outranked sorting genetic algorithm to public project portfolio selection
815
Application of the non-primitive MSA-based models in predicting the activity and the osmotic coefficients of aqueous electrolyte solutions
816
Application of the Norm Estimates for Univalence of Analytic Functions
817
Application of the normal form of vector fields to predict interarea separation in power systems
818
Application of the normalization method for the determination of J–R curves
819
Application of the normalization method for the determination of J–R curves
820
Application of the normalization method for the determination of J–R curves
821
Application of the novel nonlinear grey Bernoulli model for forecasting unemployment rate
822
Application of the np+mP modeling approach for simulating secondary organic particulate matter formation from α-pinene oxidation
823
Application of the NRL tight-binding method to the heavy elements Pb and Po Original Research Article
824
Application of the number-theoretic method to the study on chromatographic retention
825
Application of the numerical manifold method to model progressive failure in rock slopes
826
Application of the OECD 301F respirometric test for the biodegradability assessment of various potential endocrine disrupting chemicals
827
Application of the O-lattice theory for the reconstruction of the high-angle near 90° tilt Si(1 1 0)/(0 0 1) boundary created by wafer bonding Original Research Article
828
Application of the One-Stop Cardiac CT Scan on 256-Row Wide Detector Revolution CT in Myocardial Ischemia of Aortic Valve Degeneration Diagnosis
829
Application of the One-Third rule in hydrocarbon and crude oil systems
830
Application of the open path FTIR with COL1SB to measurements of ozone and VOCs in the urban area
831
Application of the optical method for determining of the RMS roughness of porous glass surfaces
832
Application of the Optimal Homotopy Asymptotic Method to squeezing flow
833
Application of the optimal power flow model in power system education
834
Application of the oral trail making test to a mixed clinical sample
835
Application of the orbital deletion procedure (ODP) to planar carbocations
836
Application of the orthogonal collocation method to determination of temperature distribution in cylindrical conductors
837
Application of the orthogonality principle to the endochronic and Mrَz models of plasticity
838
Application of the out-of-kilter algorithm to the asymmetric traveling salesman problem
839
Application of the output dependent feature scaling in modeling and prediction of performance of counter flow vortex tube having various nozzles numbers at different inlet pressures of air, oxygen, nitrogen and argon
840
Application of the overlap model to calculating correlated exchange energies
841
Application of the oxidative induction test to depolymerizing systems
842
Application of the Ozawa model to non-isothermal crystallization of poly(ethylene terephthalate)
843
Application of the pairwise energy model to various isotopic variations of the H + H2 reaction Original Research Article
844
Application of the palladium-catalyzed N-arylation of hydrazones to deactivated heteroaryl halides in the synthesis of pyrazoles
845
Application of the parabolic equation method to medical ultrasonics
846
Application of the parabolic spline method (PSM) to a multi-dimensional conservative semi-Lagrangian transport scheme (SLICE)
847
Application of the parameter of defect resistance to the evaluation of the susceptibility of structural steels to brittle fracture
848
Application of the Parametric Regression Model with the Four-Parameter Log-Logistic Distribution for Determining of the Effecting Factors on the Survival Rate of Colorectal Cancer Patients in the Presence of Competi
849
Application of the ParaSight™-F dipstick test for malaria diagnosis in a district control program
850
Application of the particle in cell approach for the simulation of bubbling fluidized beds of Geldart A particles
851
Application of the partition-limited model for plant uptake of organic chemicals from soil and water
852
Application of the patch test to incompatible laminated finite elements
853
Application of the pattern-recognition method for modelling expert estimation of chromatogram quality Original Research Article
854
Application of the penalty function method to generalized convex programs Original Research Article
855
Application of the Perceptual Factors, Enabling and Reinforcing Model on Pap Smaear Screening in Iranian Northern Woman
856
Application of the performance-goal based approach for establishing the SSE site specific response spectrum for new nuclear power plants in South Africa
857
Application of the perturbed chain SAFT equation of state to complex polymer systems using simplified mixing rules
858
Application of the perturbed Lennard–Jones chain equation of state to solute solubility in supercritical carbon dioxide
859
Application of the Perturbed-Chain SAFT equation of state to polar systems
860
Application of the Pfaffian technique to the KR and mNVN equations
861
Application of the phase time and transmission coefficients to the study of transverse elastic waves in quasiperiodic systems with planar defects
862
Application of the Phenomenological Model to Electrophoretic Mobility in Mixed Solvent Electrolyte Systems in Capillary Zone Electrophoresis
863
Application of the phosphoramidate ProTide approach to the antiviral drug ribavirin Original Research Article
864
Application of the photoacoustic method for characterization of natural galena (PbS)
865
Application of the photo-Fenton process to the treatment of wastewaters contaminated with diesel
866
Application of the Pictet–Spengler reaction to aryl amine substrates linked to deactivated aromatic heterosystems
867
Application of the Pictet–Spengler reaction to aryl amine-based substrates having pyrimidine as a π-nucleophile: synthesis of pyrimidoquinolines with structural analogy to benzonaphthyridines present in alkaloids
868
Application of the pinch technique to neutral current amplitudes and the concept of the Z mass
869
Application of the Pisarenko–Lebedev Criterion to the Strength Analysis of High-Pressure Appparatus for the Synthesis of Superhard Materials
870
Application of the Pitzer Method for Modeling Densities of Actinide Solutions in the SCALE Code System
871
Application of the Pitzer model for the estimation of activity coefficients of electrolytes in ion selective membranes
872
Application of the Plackett-Burman statistical design to optimize poly(â-hydroxybutyrate) production by Ralstonia eutropha in batch culture
873
Application of the planningcompass to the nursing curriculum: a tool for health promotion practice
874
Application of the plastein reaction to mycoprotein: I. Plastein synthesis
875
Application of the plastein reaction to mycoprotein: II. Plastein properties
876
Application of the PN method to the matrix form transport equation
877
Application of the PnET-BGC – An integrated biogeochemical model – To assess the surface water ANC recovery in the Adirondack region of New York under three multi-pollutant proposals
878
Application of the point stress criterion to the failure of composite pinned joints
879
Application of the Poisson Boltzmann polyelectrolyte model for analysis of thermal denaturation of DNA in the presence of Na+ and polyamine cations Original Research Article
880
Application of the Poisson–Nernst–Planck equations to the migration test
881
Application of the polyconjugated main chain polymer DPOP-PPV for ultrafast all-optical switching in a nonlinear directional coupler Original Research Article
882
Application of the Polyhedral Conic Functions Method in the Text Classification and Comparative Analysis
883
Application of the polymer chain-of-rotator (PCOR) equation of state and its extension to polymer blends
884
Application of the polymerase chain reaction (PCR) to quantify micro-metastasis in an experimental animal
885
APPLICATION OF THE POLYMERASE CHAIN REACTION TO THE DIAGNOSIS OF SICKLE CELL DISEASE IN IRAN
886
Application of the polynomial chaos approximation to a stochastic parametric vibrations problem
887
Application of the polysilicone fullerene coating for solid-phase microextraction in the determination of semi-volatile compounds
888
Application of the Posicast control method to static shunt compensators
889
Application of the Post-Boiling-Transition Standard to Licensing Analysis
890
Application of the Postconcussive Syndrome Questionnaire with Medical and Psychiatric Outpatients
891
APPLICATION OF THE POTENTIAL FUNCTION METHOD IN PIEZOTHERMOELASTICITY: SOLUTIONS FOR COMPOSITE CIRCULAR PLATES
892
Application of the pothole DAF method to vehicles traversing periodic roadway irregularities
893
Application of the Prandtl–Nadai cell model to a regional scale fault intersection: the Grésigne–Quercy block (SW France)
894
Application of the PRECEDE Model to Understanding Postnatal Depression
895
Application of the Precede-Proceed Model in Promoting Physical Activity for Prevention of Osteoporosis among Women
896
Application of the PRECEDE-PROCEED Planning Model in Designing a Genital Health Program
897
Application of the pressure–state–response framework to perceptions reporting of the state of the New Zealand environment
898
Application of the principal component analysis method in the biodegradation polyurethanes evaluation
899
Application of the principle of congruence to high-pressure phase equilibria of alkanes in supercritical propane
900
Application of the principle of corresponding states to orthobaric densities of organic and inorganic compounds
901
Application of the Principle of Good Faith in Electronic Transactions (ECommerce) by Consumers That Use the Cash on Delivery (COD) Method
902
Application of the principle of maximum entropy production to the analysis of the morphological stability of a growing crystal
903
Application of the principle of minimizing the derivative to the construction of finite-difference schemes for computing discontinuous solutions of gas dynamics
904
Application of the Principle of Responsibilities in the Management of Assets of West Lombok Regency (Lombok City Center (LCC) Case Study)
905
Application of the principles of gas permeability and stochastic particle agitation to predict the pressure loss in slug flow pneumatic conveying systems
906
Application of the process simulation tool NF-PROJECT for efficient process development — optimization of two-stage NF processes for the treatment of spent process water Original Research Article
907
Application of the projection method to determine weights of decision makers for group decision making
908
Application of the PROMETHEE technique to determine depression outlet location and flow direction in DEM
909
Application of the proper orthogonal decomposition to turbulent convective flows in a simulated Czochralski system
910
Application of the Protection Motivation Theory in Predicting Preventive Behaviors from Children's Accidental Falls in Mothers with Children Less than Three Years Old Referred to Health Centers
911
Application of the Protection Motivation Theory to Genetic Testing for Breast Cancer Risk
912
Application of the proximal flow convergence method to calculate the effective regurgitant orifice are in aortic regurgitation
913
Application of the pseudo-excitation method to assessment of walking variability on footbridge vibration
914
Application of the PSO–SVM model for recognition of control chart patterns
915
Application of the Pt–Re–Os isotopic systems to mantle geochemistry and geochronology
916
APPLICATION OF THE PTSD SYMPTOMS SCALE (PSS) FOR IRANIAN PTSD PATIENTS
917
Application of the pulse-shape technique to proton-alpha discrimination in Si-detector arrays
918
Application of the Q-slope classification system for slope stability assessment of the south flank of the Assalouyeh anticline, South Pars Zone
919
Application of the quadrilateral area coordinate method: a new element for laminated composite plate bending problems
920
Application of the quadrilateral area co-ordinate method: a new element for Mindlin-Reissner plate
921
Application of the quantum entropy theoretic methods to homeomorphism problems of operator algebras
922
Application of the quartz crystal microbalance for determination of phenol in solution
923
Application of the quartz crystal microbalance to measurement of the concentration of electrolyte in lead/acid batteries
924
Application of the Queuing Analytic Theory in Emergency Department
925
Application of the QUILF thermobarometer to the peralkaline trachytes and pantellerites of the Eburru volcanic complex, East African Rift, Kenya
926
Application of the Radical Cascade of Acyclic Peptide-Based Precursors into Analogues of Type I (beta)-Turn
927
Application of the Raman technique to measure stress states in individual Si particles in a cast Al–Si alloy Original Research Article
928
Application of The Random Matrix Theory on the Cross-Correlation of Stock Prices
929
Application of the RAPD technique and morphological characteristics in cultivated olives (Olea europaea sativa)
930
Application of the Ratio Derivative Method in Quantitative Analysis of Samples Dyed with Ternary Dye Mixtures
931
Application of the Rayleigh-Ritz variational technique for coronal loop oscillations
932
Application of the RBF meshless method to laminar flame propagation
933
Application of the RBF meshless method to the solution of the radiative transport equation
934
Application of the reaction class transition state theory to the kinetics of hydrogen abstraction reactions of alkanes by atomic chlorine
935
Application of the reaction path method to the reaction: H+CH4→H2+CH3 Original Research Article
936
Application of the reassignment time–frequency method on an acoustic signals backscattered by an air-filled circular cylindrical shell immersed in water
937
Application of the Reciprocity Theorem to Analyze Ultrasound Generated by High-Intensity Surface Heating of Elastic Bodies
938
Application of the reciprocity theorem to scattering of surface waves by a cavity
939
Application of the Recovery Curve Method for evaluation of matrix–fracture interactions
940
Application of the Recursive Subtraction Pulse Shape Analysis algorithm to in-beam HPGe signals
941
Application of the Recursive Subtraction Pulse Shape Analysis algorithm to in-beam HPGe signals
942
Application of the reduced Navier–Stokes methodology to flow stability of Falkner–Skan class flows
943
Application of the redundant servomotor approach to design of path generator with dynamic performance improvement
944
Application of the reference frame theory to the dynamic analysis of a three-phase induction motor fed from a single-phase supply
945
Application of the relaxation element method to some problems of stress–strain calculations of solids on mesolevel
946
Application of the Relevance Vector Machine for Modeling Surface Roughness in WEDM Process for Ti-6Al-4V Titanium Alloy
947
Application of the Relevance Vector Machine for Modeling Surface Roughness in WEDM Process for Ti-6Al-4V Titanium Alloy
948
Application of the relevance vector machine to canal flow prediction in the Sevier River Basin
949
Application of the Remote Sensing Technology in the Line Arrangement of Shallow Artificial Seismic Exploration
950
Application of the replacement method as a novel variable selection strategy in QSAR. 1. Carcinogenic potential
951
Application of the replacement method as novel variable selection in QSPR. 2. Soil sorption coefficients
952
Application of the resistances in series model in ultrafiltration Original Research Article
953
Application of the resonant normal form to high-order nonlinear ODEs using Mathematica
954
Application of the resonant normal form to high-order nonlinear ODEs using Mathematica
955
Application of the response surface methodology (RSM) for optimizing the production of volatile organic compounds (VOCs) by Trichosporon moniliiforme
956
Application of the response surface methodology for optimization of whey protein partitioning in PEG/phosphate aqueous two-phase system
957
Application of the response surface methodology for potassium determination in soils by AAS using the slurry technique
958
Application of the Response Surface Methodology for the Optimization of the Aqueous Enzymatic Extraction of Pistacia Khinjuk Oil
959
Application of the restricted-access precolumn packing material alkyl-diol silica in a column-switching system for the determination of ketoprofen enantiomers in horse plasma
960
Application of the Restriction Landmark Genome Scanning (RLGS) Method for Analysis of Genetic Diversity between Asian and African Sorghum
961
Application of the reverberation-ray matrix to the propagation of elastic waves in a layered solid
962
Application of the Reverse Line Blot Assay for the Molecular Detection of Theileria and Babesia sp. in Sheep and Goat Blood Samples from Pakistan.
963
Application of the reversed-phase liquid chromatographic model to describe the retention behaviour of polydisperse macromolecules in gradient and isocratic liquid chromatography
964
Application of the R-function method to nonlinear vibrations of thin plates of arbitrary shape
965
Application of the rhEGF on burn wounds
966
Application of the Rietveld method to the analysis of anhydrous cement Review Article
967
Application of the rigid finite element method to modelling of free vibrations of a band saw frame
968
Application of the ring-loaded strength (RLS) disc test to monitor the effects of thermal pre-treatments on ore grindability
969
Application of the ring-on-ring test for abrasive wear modeling of rolling undercarriage components in track-type machines
970
Application of the risk assessment paradigm to the induction of allergic contact dermatitis
971
Application of the risk oriented accident analysis methodology (ROAAM) to severe accident management in the AP600 advanced light water reactor
972
Application of the River Styles framework as a basis for river management in New South Wales, Australia
973
Application of the roadbed cooling approach in Qinghai–Tibet railway engineering
974
Application of the Rosin–Rammler and Gates–Gaudin–Schuhmann models to the particle size distribution analysis of agglomerated cork
975
Application of the RothC model to the results of long-term experiments on typical upland soils in northern China
976
Application of the roundtable on sustainable biofuels method to regional differences in nitrous oxide emissions for the rapeseed hydrotreated renewable jet life cycle
977
Application of the ROV method for the selection of cutting fluids
978
Application of the rule extraction method to evaluate seismicity of Iran
979
Application of the rule of shielding in the design of novel fluorinated structural motifs and peptidomimetics
980
Application of the ruling span concept for overhead lines in mountainous terrain
981
Application of the safe model to the Solling spruce site
982
Application of the safe model to the Solling spruce site
983
Application of the SAFES (systematic approach of food engineering systems) methodology to salting, drying and desalting of cod Original Research Article
984
Application of the SAFES (systematic approach to food engineering systems) methodology to roasted coffee process Original Research Article
985
Application of the SAFES (systematic approach to food engineering systems) methodology to strawberry freezing process Original Research Article
986
Application of the SAFES (systematic approach to food engineering systems) methodology to the sorption of water by salted proteins Original Research Article
987
Application of the safety method of the lines of defence for two ITER accidents
988
Application of the SAFT-VR density functional theory to the prediction of the interfacial properties of mixtures of relevance to reservoir engineering
989
Application of the SAFT-VR equation of state to vapor–liquid equilibrium calculations for pure components and binary mixtures using the Sutherland potential
990
Application of the SALI chaos detection method to accelerator mappings
991
Application of the SALI chaos detection method to accelerator mappings
992
Application of the SBAS-DInSAR technique to fault creep: A case study of the Hayward fault, California
993
Application of the scale entropy diffusion model to describe a liquid atomization process
994
Application of the scaling properties of the correlation energy functional to local and gradient-dependent forms
995
Application of the scenario questionnaire of horizontal and vertical individualism and collectivism to the assessment of cultural distance and cultural fit
996
APPLICATION OF THE SCHWARZ-CHRISTOFFEL TRANSFORMATION IN SOLVING TWO-DIMENSIONAL TURBULENT FLOWS IN COMPLEX GEOMETRIES.
997
Application of the Seattle Heart Failure Model in Patients >80 Years of Age Enrolled in a Tertiary Care Heart Failure Clinic
998
Application of the self-heat recuperation technology for energy saving in biomass drying system
999
Application of the self-heat recuperation technology to crude oil distillation
1000
Application of the self-organizing map (SOM) to assess the heavy metal removal performance in experimental constructed wetlands
