<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Development of a micro thermal sensor for real-time monitoring of lubricating oil concentration
2
Development of a micro-array-type electron multiplier
3
Development of a micro-array-type electron multiplier
4
Development of a micro-balance system for dust and water vapour detection in the Mars atmosphere Original Research Article
5
Development of a microbial bioassay for chlorinated and brominated hydrocarbons
6
Development of a microbial fermentation process for detoxification of gossypol in cottonseed meal
7
Development of a microbial process for the recovery of petroleum oil from depleted reservoirs at 91–96 °C
8
Development of a microbioreactor with ecto-nucleoside triphosphate diphosphohydrolase 2 (NTPDase2) immobilized on a polyacrylamide-coated capillary at the outlet
9
Development of a microcalorimeter array for wide energy band X-ray astronomy
10
Development of a microcalorimeter array for wide energy band X-ray astronomy
11
Development of a microcapillary column for detecting targeted messenger RNA molecules
12
Development of A Microchamber Array for Picoliter PCR
13
Development of a microchannel based pasteurizer for energy efficient processing of liquids
14
Development of a microchannel evaporator model for a CO2 air-conditioning system
15
Development of a microchannel reactor concerning steam reforming of methanol
16
Development of a micro-cogeneration laboratory and testing of a natural gas CHP unit based on PEM fuel cells
17
Development of a microconductometric biosniffer for detection of trimethylamine
18
Development of a microcontroller-based, photovoltaic maximum power point tracking control system
19
Development of a micro-drilling burr-control chart for PCB drilling
20
Development of a microelectrode array sensing platform for combination electrochemical and spectrochemical aqueous ion testing
21
Development of a Microemulsion High Performance Liquid Chromatography (MELC) Method for Determination of Salbutamol in Metered-Dose Inhalers (MDIS)
22
Development of a microfabricated electrochemical-cantilever hybrid platform
23
Development of a microfabricated impinger for on-chip gas phase sampling Original Research Article
24
Development of a microfilter separation system coupled with a high dose of powdered activated carbon for advanced water treatment Original Research Article
25
Development of a micro-flame ionization detector using a diffusion flame
26
Development of a microfluidic biosensor for detection of environmental mycobacteria
27
Development of a microfluidic biosensor for detection of environmental mycobacteria
28
Development of a micro-forming system for micro-punching process of micro-hole arrays in brass foil
29
Development of a micro-indentation model simulating different mechanical responses of the fibre/matrix interface
30
Development of a micromachined hazardous gas sensor array
31
Development of a micro-manipulation system having a two-fingered micro-hand
32
Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures
33
Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings
34
Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings
35
Development of a micrometeorological model for the estimation of methane flux from paddy fields: Validation with standard direct measurements
36
Development of a micro-planar Ag/AgCl quasi-reference electrode with long-term stability for an amperometric glucose sensor Original Research Article
37
Development of a microporous membrane liquid–liquid extractor for organophosphate esters in human blood plasma: identification of triphenyl phosphate and octyl diphenyl phosphate in donor plasma
38
Development of a micropulverized extraction method for rapid toxicological analysis of methamphetamine in hair
39
Development of a micro-punching machine and study on the influence of vibration machining in micro-EDM
40
Development of a microreactor for the production of hydrogen from ammonia
41
Development of a microreactor-based parallel catalyst analysis system for synthesis gas conversion
42
Development of a Microscale Cell Culture Analog To Probe Naphthalene Toxicity
43
Development of a microscopic activity-based framework for analyzing the potential impacts of transportation control measures on vehicle emissions
44
Development of a micro-spectrometer system for process control application
45
Development of a microtitre plate method for determination of phenol utilization, biofilm formation and respiratory activity by environmental bacterial isolates
46
Development of a microwave assisted extraction method for the analysis of 2,4,6-trichloroanisole in cork stoppers by SIDA–SBSE–GC–MS Original Research Article
47
Development of a microwave-assisted digestion method using ICP-OES to measure metals in gum deposits of internal combustion engines
48
Development of a microwave-assisted extraction for the analysis of phenolic compounds from Rosmarinus officinalis Original Research Article
49
Development of a microwave-enhanced isotopic labelling procedure based on the Eschweiler–Clarke methylation reaction
50
Development of a microwave-type densimeter for slush hydrogen Original Research Article
51
Development of a micro-X-ray fluorescence system based on polycapillary X-ray optics for non-destructive analysis of archaeological objects
52
Development of a micro-X-ray fluorescence system based on polycapillary X-ray optics for non-destructive analysis of archaeological objects
53
Development of a mid-Holocene estuarine basin, Rhine–Meuse mouth area, offshore The Netherlands
54
Development of a mild mercaptoethanol extraction method for determination of mercury species in biological samples by HPLC–ICP-MS
55
Development of a mild method for the extraction of anthraquinones from their aluminum complexes in madder lakes prior to HPLC analysis
56
Development of a Millisecond Pulse-Heating Apparatus
57
Development of a miniature analytical system in a lab-on-valve for determination of trace copper by bead injection spectroscopy
58
Development of a miniature cryogenic fluid circuit and a cryogenic micropump Original Research Article
59
Development of a miniature double-pass cylindrical mirror electron energy analyzer (DPCMA), and its application to Auger photoelectron coincidence spectroscopy (APECS)
60
Development of a miniature STM holder for study of electronic conductance of metal nanowires in UHV–TEM
61
Development of a miniaturized diffusive gradients in thin films (DGT) device Original Research Article
62
Development of a miniaturized polymer electrolyte membrane fuel cell with silicon separators
63
Development of a mini-biogas digester for lighting in India
64
Development of a mini-channel evaporator model using R1234yf as working fluid
65
Development of a Minimally Invasive and Non-invasive Lipolysis Laser System for Effective Fat Reduction
66
Development of a Minimally Invasive Technique for Coronary Revascularization in a Porcine Model
67
Development of a Minimum Data Set (MDS) for C-Section Anesthesia Information Management System (AIMS)
68
Development of a Minimum Data Set (MDS) for dental implants registry
69
development of a minimum data set for drug module of computerized physician order entry system
70
Development of a mix design method for SCC based on the rheological characteristics of paste
71
Development of a mixed film lubrication model in cold rolling
72
Development of a mixed integer programming model for technology development strategy and its application to IGCC technologies
73
Development of a mixed solvent system for the efficient resolution of (R, S)-2-octanol catalyzed by magnetite-immobilized lipase
74
Development of a mixed-mode solid phase extraction method and further gas chromatography mass spectrometry for the analysis of 3-alkyl-2-methoxypyrazines in wine
75
Development of a Mixture Supply System for Machining with Minimal Quantity Lubrication
76
DEVELOPMENT OF A MOBILE APPLICATION FOR CHILDREN’S READING SKILL: LITERASI LINUS (LiLIN) MOBILE APP
77
Development of a mobile fused deposition modeling system with enhanced manufacturing flexibility
78
DEVELOPMENT OF A MOBILE MACHINE FOR PICKING PRICKLY PEAR FRUIT
79
Development of a mobile safety monitoring system for construction sites
80
Development of a mobile system based on laser-induced breakdown spectroscopy and dedicated to in situ analysis of polluted soils
81
Development of a mobile system based on laser-induced breakdown spectroscopy and dedicated to in situ analysis of polluted soils
82
Development of a mobile tracer correlation method for assessment of air emissions from landfills and other area sources
83
Development of a mobile water maker, a sustainable way to produce safe drinking water in developing countries Original Research Article
84
Development of a Mode III fatigue test method and a peel test method for tire specimens
85
Development of a Model and Sensor Based Smart Irrigation System
86
Development of a model based scoring system for diagnosis of canine disseminated intravascular coagulation with independent assessment of sensitivity and specificity
87
Development of a model compatible with solar assisted cylindrical energy storage tank and variation of stored energy with time for different phase change materials
88
Development of a model describing the effect of temperature, water activity and (gel) structure on growth and ochratoxin A production by Aspergillus carbonarius in vitro and evaluation in food matrices of different viscosity Original Research Article
89
Development of a model for assessment of biomaterial encrustation in the upper urinary tract
90
DEVELOPMENT OF A MODEL FOR DETECTION AND ESTIMATION OF DEPTH OF SHALLOW BURIED NON-METALLIC LANDMINE AT MICROWAVE X-BAND FREQUENCY
91
Development of a model for environmental risk assessment of growth promoters
92
Development of a model for environmental risk assessment of growth promoters
93
Development of a Model for Estimation of Sunshine Hour Data for Different Regions of Uganda
94
Development of a model for high precursor conversion efficiency pulsed-pressure chemical vapor deposition (PP-CVD) processing
95
Development of a model for ice core dating based on grain elongation
96
Development of a model for laparoscopic cholecystectomy video assisted training. A randomized study
97
Development of a Model for Locating Hubs in a Competitive Environment under Uncertainty: A Robust Optimization Approach
98
Development of a model for membrane filtration of long and flexible macromolecules: Application to predict dextran and linear DNA rejections in ultrafiltration
99
Development of a model for predicting trihalomethanes propagation in water distribution systems
100
Development of a model for radon concentration in indoor air Original Research Article
101
Development of a model for reactive emissions from industrial stacks
102
Development of a Model for Rural Tourism Supply Chain Management: A Case Study of Touristic Villages of Central Mazandaran, Iran
103
Development of a model for serpentine quantification in nickel laterite minerals by infrared spectroscopy
104
Development of a model for the analysis of human behavior in a smart home environment
105
Development of a model for the estimation of photosynthetically active radiation from geostationary satellite data in a tropical environment
106
Development of a model for the lean NOx catalytic reaction with hydrocarbon adsorption and desorption
107
Development of a model for the rational design of molecular imprinted polymer: Computational approach for combined molecular dynamics/quantum mechanics calculations Original Research Article
108
Development of a model for the sintering of PZT multilayer ceramics and their dielectric properties
109
Development of a model for thermoeconomic design and operation optimization of a PEM fuel cell system
110
Development of a Model for Training and Evaluation of Laparoscopic Skills
111
Development of a model of tissue with potentially malignant disorders (PMD) in the hamster cheek pouch to explore the long-term potential therapeutic and/or toxic effects of different therapeutic modalities
112
Development of a model system for touristic hunting revenue collection and allocation
113
Development of a model system to study fuel autoxidation in supercritical media: decomposition kinetics of 2,2′-azobis(isobutyronitrile) in supercritical carbon dioxide
114
Development of a model to calculate asbestos fiber from damaged asbestos slates depending on the degree of damage
115
Development of a model to describe the compositional growth and dietary lysine requirements of pigs fed ractopamine
116
Development of a model to reproduce observed suspended sediment distributions in the southern North Sea using Principal Component Analysis and Multiple Linear Regression
117
Development of a model whipped cream: Effects of emulsion droplet liquid/solid character and added hydrocolloid
118
Development of a model-based netsourcing decision support system using a five-stage methodology
119
Development of a modeling approach to predict ash formation during co-firing of coal and biomass
120
Development of a modelling framework in response to new European energy-efficiency regulatory obligations: The Irish experience
121
Development of a Modern Curriculum in Software Engineering at Master Level across Countries
122
Development of a modified baited trap for detection of schistosome cercariae using natural oils rich in polyunsaturated fatty acids in Sudan
123
Development of a Modified Bromley Methodology for the estimation of ionic media effects on solution equilibria: Part 5. The chemical model of boric acid in aqueous solution at 25 °C and comparison with arsenious acid
124
Development of a modified Bromley methodology for the estimation of ionic media effects on solution equilibria: Part 6. The chemical model of phosphoric acid in aqueous solution at 25 °C and comparison with arsenic acid
125
Development of a Modified Bromleyʹs Methodology (MBM) for the estimation of ionic media effects on solution equilibria Part 1. Calculation of the interaction parameters in the molar and molal scales at 25°C
126
Development of a Modified Bromleyʹs Methodology (MBM) for the estimation of ionic media effects on solution equilibria. Part 2. Correlation of the molar and molal interaction parameters with the charge and crystal radii of the ions
127
Development of a Modified Bromleyʹs Methodology for the estimation of ionic media effects on solution equilibria: Part 3. Application to the construction of thermodynamic models
128
Development of a Modified Bromleyʹs Methodology for the estimation of ionic media effects on solution equilibria: Part 4. The chemical model of Fe(III) with the halide ligands in aqueous solution at 25°C
129
Development of a modified concrete rheometer to measure the rheological behavior of conventional and self-consolidating concretes
130
Development of a modified CVD coating process for the enhancement of the high temperature oxidation resistance of Cr2O3 and Al2O3 forming alloys
131
Development of a modified CVD coating process for the enhancement of the high temperature oxidation resistance of Cr2O3 and Al2O3 forming alloys
132
Development of a modified dry curing process for beef
133
Development of a modified electrode with amine-functionalized TiO2/multi-walled carbon nanotubes nanocomposite for electrochemical sensing of the atypical neuroleptic drug olanzapine
134
Development of a Modified Friedewald’s Formula to Calculate Low-Density Lipoprotein in an Iranian Population
135
Development of a modified sum-peak method for activity determination of some gamma emitters
136
Development of a modified sum-peak method for activity determination of some gamma emitters
137
Development of a modified vermireactor for efficient vermicomposting: a laboratory study
138
Development of a modified wiggler for higher harmonic lasing of a free-electron laser
139
Development of a modified-release hydrophilic matrix system of a plant extract based on co-spray-dried powders
140
Development of a MODIS tree cover validation data set for Western Province, Zambia
141
Development of a modular CdTe detector plane for gamma-ray burst detection below 100 keV Original Research Article
142
Development of a modular nodal method for solving three dimensional spherical harmonic equations
143
Development of a molecular detection and differentiation system for ochratoxin A producing Penicillium species and its application to analyse the occurrence of Penicillium nordicum in cured meats
144
Development of a molecular dynamics potential for Si–H systems and its application to CVD reaction processes
145
Development of a Molecular Kinetic Model and Tuning of its Required Kinetic Parameters for Thermal Cracking
146
Development of a molecular kinetic scheme for methane partial oxidation over a Rh/α-Al2O3 catalyst
147
Development of a molecular method for the rapid discrimination of red seaweeds used for agar production
148
Development of a molecularly imprinted polymer based solid-phase extraction of local anaesthetics from human plasma
149
Development of a molecularly imprinted polymer based solid-phase extraction of local anaesthetics from human plasma Original Research Article
150
Development of a molecularly imprinted polymer for pyridoxine using an ion-pair as template Original Research Article
151
Development of a molecularly imprinted polymer for selective extraction followed by liquid chromatographic determination of sitagliptin in rat plasma and urine
152
Development of a molecularly imprinted polymer for the analysis of avermectin Original Research Article
153
Development of a momentum determined electron beam in the 1–45 GeV range
154
Development of a momentum determined electron beam in the 1–45 GeV range
155
Development of a monitoring system for a PV solar plant
156
Development of a monitoring tape for ammonia gas in air by fluorescence detection
157
Development of a monitoring tape for nitrogen dioxide in air
158
Development of a Monoclonal Antibody for the Detection and Quantification of Predation on Slugs within the Arion hortensis agg. (Mollusca: Pulmonata)
159
Development of a monoclonal antibody specific to granulocytes and its application for variation of granulocytes in scallop Chlamys farreri after acute viral necrobiotic virus (AVNV) infection
160
Development of a monoclonal antibody-based competitive ELISA for detection of β-conglycinin, an allergen from soybean
161
Development of a monoclonal antibody-based competitive enzyme linked-immunosorbent assay (c-ELISA) for quantification of silver carp parvalbumin
162
Development of a monoclonal antibody-based enzyme-linked immunosorbent assay for detection of the furaltadone metabolite, AMOZ, in fortified shrimp samples
163
Development of a monoclonal antibody-based enzyme-linked immunosorbent assay for the analysis of the new fungicide 2-allylphenol in strawberry fruits
164
Development of a monoclonal antibody-based indirect competitive immunosorbent assay for 4(5)-Methylimidazole detection in caramels
165
Development of a monoclonal antibody-based sandwich-type enzyme-linked immunosorbent assay (ELISA) for detection of abrin in food samples
166
Development of a monoclonal blocking ELISA for the detection of antibody to Mycoplasma bovis in dairy cattle and comparison to detection by PCR
167
Development of a monoclonal blocking ELISA for the detection of antibody to Mycoplasma bovis in dairy cattle and comparison to detection by PCR
168
Development of a Monocyte Activation Test for Evaluating Recombinant Hepatitis B Vaccine: A Novel Approach for Pyrogen Assessment
169
Development of a monocyte/macrophage-like cell line, RTS11, from rainbow trout spleen
170
Development of a monolithic silica extraction tip for the analysis of proteins
171
Development of a Monte Carlo based aggregate model for residential electric water heater loads
172
Development of a More Effective Mosquito Trapping Box for Vector Control
173
Development of a more efficient emulsion liquid membrane system with a dilute polymer solution for extraction of penicillin G
174
Development of a more realistic upper bound solution for the three-dimensional problems in the forward extrusion process
175
Development of a more realistic upper bound solution for the three-dimensional problems in the forward extrusion process
176
Development of a morphological texture in relation with the crystallographic texture during sintering of strontium hexaferrites
177
Development of a movable synchrotron-radiation mask for the Photon Factory Advanced Ring (PF-AR)
178
Development of a movable synchrotron-radiation mask for the Photon Factory Advanced Ring (PF-AR)
179
DEVELOPMENT OF A MOWER FOR GRASS HARVESTING
180
Development of a MSW classification system for the evaluation of mechanical properties
181
Development of a multi-agent-based distributed simulation platform for semiconductor manufacturing
182
Development of a multianalyte method based on micro-matrix-solid-phase dispersion for the analysis of fragrance allergens and preservatives in personal care products
183
Development of a multicenter peripheral arterial interventional database: The PVD-QI2
184
Development of a multi-channel exploratory battery for psychophysiological assessment: the Stress Profile
185
Development of a multichannel Fourier-transform spectrometer to measure weak chemiluminescence: Application to the emission of singlet-oxygen dimol in the decomposition of hydrogen peroxide with gallic acid and K3[Fe(CN)6]
186
Development of a multichannel integrated interferometer immunosensor
187
Development of a Multichannel Microfluidic Analysis System Employing Affinity Capillary Electrophoresis for Immunoassay
188
Development of a multichannel monolith large-scale enzymatic membrane and application in an immobilized enzymatic membrane reactor
189
Development of a multi-channel waveform sampling ASIC for animal PET with DOI information
190
Development of a multi-channel waveform sampling ASIC for animal PET with DOI information
191
Development of a multi-class method for the quantification of veterinary drug residues in feedingstuffs by liquid chromatography-tandem mass spectrometry
192
Development of a multi-classification neural network model to determine the microbial growth/no growth interface
193
Development of a multi-component aqueous NiO, CuO, and Co3O4 suspension for use in suspension plasma spraying of SOFC anode layers
194
Development of a multi-component chemically reactive detection conjugate for the determination of Hg(II) in water samples Original Research Article
195
Development of a multi-component chemically reactive detection conjugate for the determination of Hg(II) in water samples Original Research Article
196
Development of a multi-component fiber-reinforced composite implant for load-sharing conditions
197
DEVELOPMENT OF A MULTI-CRITERIA AND MULTI-PARAMETRIC OPTIMIZATION TOOL FOR THE CUTTING CONDITIONS OF TURNING PROCESS
198
Development of a multicriteria tool for optimizing the renovation of buildings
199
Development of a Multidimensional HighPerformance Liquid Chromatography (HPLC) Separation for Bayer Humic Substances
200
Development of a multidimensional measure of fibromyalgia symptomatology: The comprehensive rating scale for fibromyalgia symptomatology
201
Development of a multidimensional measure of tobacco dependence in adolescence
202
Development of a multi-dimensional thermal-hydraulic system code, MARS 1.3.1
203
Development of a multi-electrode extrapolation chamber as a prototype of a primary standard for the realization of the unit of the absorbed dose to water for beta brachytherapy sources
204
Development of a multi-electrode extrapolation chamber as a prototype of a primary standard for the realization of the unit of the absorbed dose to water for beta brachytherapy sources
205
Development of a Multi-Epitope Recombinant Protein for the Diagnosis of Human Visceral Leishmaniasis
206
Development of a multi-factor model for predicting the effects of ambient ozone on the biomass of white clover
207
Development of a multi-fibre unit cell for use in modelling of fatigue of unidirectional composites
208
Development of a multi-Fourier-transform interferometer: fundamentals
209
Development of a multi-frequency laser for use in MALDI-TOFMS
210
Development of a multifunction module for the neutron electric dipole moment experiment at PSI
211
Development of a multifunction module for the neutron electric dipole moment experiment at PSI
212
Development of a multi-function software decision support tool for the promotion of the safe reuse of treated urban wastewater Original Research Article
213
Development of a multifunctional membrane for chromatic warning and enhanced adsorptive removal of heavy metal ions: Application to cadmium
214
Development of a multifunctional particle spectrometer for space radiation imaging
215
Development of a multifunctional particle spectrometer for space radiation imaging
216
Development of a Multi-GeV spectrometer for laser–plasma experiment at FLAME
217
Development of a Multi-GeV spectrometer for laser–plasma experiment at FLAME
218
Development of a multi-grid-type microstrip gas chamber for synchrotron radiation applications and spallation neutron sources
219
Development of a multi-grid-type microstrip gas chamber for synchrotron radiation applications and spallation neutron sources
220
Development of a multilayer anode for solid oxide fuel cells
221
Development of a multi-layer diffusion couple to study fission product transport in β-SiC
222
Development of a multi-layered micro-reactor coated with Pt–Co/Al2O3 catalyst for preferential oxidation of CO
223
Development of a multilocus variable number of tandem repeat typing method for Oenococcus oeni Original Research Article
224
Development of a multilocus variable-number of tandem repeat typing method for Listeria monocytogenes serotype 4b strains
225
Development of a multi-mechanistic, dual-porosity, dual-permeability, numerical flow model for coalbed methane reservoirs
226
Development of a multimetric index based on benthic macroinvertebrates for downstream Jajrud River in Tehran province, Iran
227
Development of a multimetric index based on benthic macroinvertebrates for the assessment of natural wetlands in Southwest Ethiopia
228
Development of a multimetric index based on macroinvertebrates for drainage ditch networks in agricultural areas
229
Development of a multi-microphone calibrator
230
Development of a multi-nozzle drop-on-demand system for multi-material dispensing
231
Development of a Multi-nutrient Data Quality Evaluation System
232
Development of a Multi-nutrient Data Quality Evaluation System
233
Development of a multi-objective coagulation system for long-term fouling control in dead-end ultrafiltration
234
Development of a multi-objective optimization algorithm using surrogate models for coastal aquifer management
235
Development of a multiobjective optimization procedure for reducing edge delamination stresses in composite plates
236
Development of A Multi-objective Robust Probabilistic Programming Mathematical Model Using Improved ε - Constrained Method in Gas Distribution Network Projects Implementation
237
Development of a multiparametric analyser based on ISFET sensors applied to process control in the wine industry
238
Development of a multiparametric system based on solid-state microsensors for monitoring a nuclear waste repository
239
Development of a multi-pass facility for equal-channel angular pressing to high total strains
240
Development of a multi-pass facility for equal-channel angular pressing to high total strains
241
Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables
242
Development of a multi-pixel photon sensor with single-photon sensitivity
243
Development of a multi-pixel photon sensor with single-photon sensitivity
244
Development of a Multiple Coil Magneto-Rheological Smart Damper to Improve the Seismic Resilience of Building Structures
245
Development of a multiple criteria based decision support system for environmental assessment of recycling measures in the iron and steel making industry
246
Development of a multiple layer vacuum insulation chip
247
Development of a multiple objective planning theory and system for sustainable air quality monitoring networks
248
Development of a multiple primer RAPD assay as a tool for phylogenetic analysis in Listeria spp. strains isolated from milkproduct associated epidemics, sporadic cases of listeriosis and dairy environments
249
Development of a Multiple-Class High-Resolution Gas Chromatographic Relative Retention Time Model for Halogenated Environmental Contaminants
250
Development of a multiple-item scale for measuring customer satisfaction in travel agencies services
251
Development of a multiplex and semi-nested PCR assay for detection of Yersinia enterocolitica and Aeromonas hydrophila in raw milk Original Research Article
252
Development of a multiplex assay for the detection of antibodies to Borrelia burgdorferi in horses and its validation using Bayesian and conventional statistical methods
253
Development of a multiplex assay for the detection of antibodies to Borrelia burgdorferi in horses and its validation using Bayesian and conventional statistical methods
254
Development of a multiplex MethyLight assay for the detection of multigene methylation in human colorectal cancer
255
Development of a multiplex PCR method for testing six GM soybean events
256
Development of a multiplex polymerase chain reaction assay for differentiation of field strain isolates and vaccine strains S19 and RB51 of Brucella in Iran
257
Development of a Multiplex Polymerase Chain Reaction for Differential Diagnosis of Canary Pox Virus
258
Development of a multiplex qPCR method for simultaneous quantification in dry-cured ham of an antifungal-peptide Penicillium chrysogenum strain used as protective culture and aflatoxin-producing moulds
259
Development of a multiplex real time PCR to detect thermophilic lactic acid bacteria in natural whey starters
260
Development of a multiplex real-time PCR assay for identification of members of the Anopheles gambiae species complex
261
Development of a multiplex real-time PCR method for pathogenic Vibrio parahaemolyticus detection (tdh+ and trh+)
262
Development of a multiplex real-time PCR method for simultaneous detection of Vibrio parahaemolyticus, Listeria monocytogenes and Salmonella spp. in raw shrimp
263
Development of a multiplex real-time PCR to quantify aflatoxin, ochratoxin A and patulin producing molds in foods
264
Development of a Multiplex RT-PCR Assay for Detection of the Causal Agents of Citrus Tristeza and Cachexia Diseases with Coamplification of Plant mRNA as an Internal Control
265
Development of a multiplex UPLC-MRM MS method for quantification of human membrane transport proteins OATP1B1, OATP1B3 and OATP2B1 in in vitro systems and tissues Original Research Article
266
Development of a multiplexed Luminex assay for simultaneous detection of enteric viruses in cattle
267
Development of a multiplexed PCR assay combined with propidium monoazide treatment for rapid and accurate detection and identification of three viable Salmonella enterica serovars
268
Development of a multi-preservative method based on solid-phase microextraction–gas chromatography–tandem mass spectrometry for cosmetic analysis
269
Development of a multipurpose fruit and vegetable processor for a manned mission to Mars Original Research Article
270
Development of a multipurpose tile body: Phase and microstructural development
271
Development of a multi-residue analytical method, based on liquid chromatography–tandem mass spectrometry, for the simultaneous determination of 46 micro-contaminants in aqueous samples
272
Development of a multi-residue analytical methodology based on liquid chromatography–tandem mass spectrometry (LC–MS/MS) for screening and trace level determination of pharmaceuticals in surface and wastewaters
273
Development of a multiresidue method for analysis of pesticides in sediments based on isotope dilution and liquid chromatography-electrospray–tandem mass spectrometry
274
Development of a multiresidue method for analyzing herbicide and fungicide residues in bovine milk based on solid-phase extraction and liquid chromatography–tandem mass spectrometry
275
Development of a multi-residue method for fast screening and confirmation of 20 prohibited veterinary drugs in feedstuffs by liquid chromatography tandem mass spectrometry
276
Development of a multiresidue method for the determination of endocrine disrupters in fish fillet using gas chromatography–triple quadrupole tandem mass spectrometry
277
Development of a multi-residue method for the determination of organic micropollutants in water, sediment and mussels using gas chromatography–tandem mass spectrometry
278
Development of a multi-residue method for the determination of pesticides in cereals and dry animal feed using gas chromatography–tandem quadrupole mass spectrometry: II. Improvement and extension to new analytes
279
Development of a multi-residue method using acetonitrile-based extraction followed by liquid chromatography–tandem mass spectrometry for the analysis of steroids and veterinary and human drugs at trace levels in soil
280
Development of a multi-residue screening method for the determination of pesticides in cereals and dry animal feed using gas chromatography–triple quadrupole tandem mass spectrometry
281
Development of a multi-resolution framework for NUBS
282
Development of a multi-scale finite element model of the osteoporotic lumbar vertebral body for the investigation of apparent level vertebra mechanics and micro-level trabecular mechanics
283
Development of a multi-spectral vision system for the detection of defects on apples Original Research Article
284
Development of a multi-stage cloud water collector Part 1: Design and field performance evaluation
285
Development of a multi-stage cloud water collector Part 2: Numerical and experimental calibration
286
Development of a multistaged foam fractionation column
287
Development of a multitechnology field-programmable gate array suitable for photonic information processing
288
Development of a multi-temporal Kalman filter approach to geostationary active fire detection & fire radiative power (FRP) estimation
289
Development of a multi-tiered approach to the in vitro prescreening of clay-based enterosorbents
290
Development of a multi-tiered business model for value chain analysis for mobile nutrition counseling online system
291
Development of a multivariate regression model for overall satisfaction in public buildings based on field studies in Beijing and Shanghai
292
Development of a multi-vendor software to size and select TEC
293
Development of a mutant of Trichoderma citrinoviride for enhanced production of cellulases
294
Development of a myricetin/hydroxypropyl-β-cyclodextrin inclusion complex: Preparation, characterization, and evaluation
295
Development of a Nanocluster-Based Platform for Determination of Sofosbuvir
296
Development of a nano-electrospray MSn method for the analysis of serotonin and related compounds in urine using a LTQ-orbitrap mass spectrometer
297
Development of a Nano-ELISA system for the rapid and sensitive detection of H9N2 avian influenza
298
Development of a nano-liquid chromatography on chip tandem mass spectrometry method for high-sensitivity hepcidin quantitation
299
Development of a nano–micro carrier system for sustained pulmonary delivery of clarithromycin
300
Development of a nanoprecipitation method for the entrapment of a very water soluble drug into Eudragit RL nanoparticles
301
Development of a nanosecond time-resolved Brewster angle microscope to observe phase change at an interface
302
Development of a nanostructure microstructure in the Al–Ni system using the electrospark deposition process
303
Development of a nanostructured lipid carrier formulation for increasing photo-stability and water solubility of Phenylethyl Resorcinol
304
Development of a narrow size-distribution aerosol generator
305
Development of a NASICON-based amperometric carbon dioxide sensor
306
Development of a National Consensus Minimum Data Set for the Diagnosis and Treatment of Oral Cancer: Towards Precision Management
307
Development of a National Guide for Designing the Structure of Makeshift Hospital: With Focus on Pandemics
308
Development of a National Mega Research Project on the Integrated Watershed Management for Iran
309
Development of a national methane emission inventory for domestic livestock in Saudi Arabia
310
Development of a natural gas reaction mechanism for engine simulations based on rapid compression machine experiments using a multi-objective optimisation strategy
311
Development of a Natural Preservative System in Fluticasone Propionate Nasal Spray Formulation Using Eucalyptus globulus Essential Oil
312
Development of a navigation and control system for an autonomous outdoor vehicle in a steel plant
313
Development of a Nb-free TiAl-based intermetallics with a low-temperature superplasticity
314
Development of a needle-type biosensor for intravascular glucose monitoring
315
Development of a Need-Oriented Steam Turbine Cycle Simulation Toolbox
316
Development of a negligible depletion-solid phase microextraction method to determine the free concentration of chlorpromazine in aqueous samples containing albumin
317
Development of a nested-PCR assay for the detection of cryptosporidium parvum in finished water
318
Development of a network-based power quality diagnosis system
319
Development of a neural fuzzy system for advanced prediction of dew point pressure in gas condensate reservoirs
320
Development of a neural network model for a cold rolling process
321
Development of a neural network model to update forest distribution data for managed alpine stands
322
Development of a neural network model to update forest distribution data for managed alpine stands
323
Development of a neural network-based fault diagnostic system for solar thermal applications
324
Development of a Neuro-Fuzzy approach for treating multimodal distributions and spurious clusters
325
Development of a neurotoxic equivalence scheme of relative potency for assessing the risk of PCB mixtures
326
Development of a neutron absorption tracer technique for evaluation of fluid dynamics in coal liquefaction reactors
327
Development of a neutron detector with a GEM
328
Development of a neutron detector with a GEM
329
Development of a Neutron Radiography System based on a 10 MeV Electron Linac
330
Development of a neutron time-of-flight source at the ELBE accelerator
331
Development of a neutron time-of-flight source at the ELBE accelerator
332
Development of a neutron tomography system using a low flux reactor
333
Development of a neutron tomography system using a low flux reactor
334
Development of a neutron-imaging detector based on pulse–height correlation between two superconducting tunnel junctions on a Li2B4O7 crystal
335
Development of a neutron-imaging detector based on pulse–height correlation between two superconducting tunnel junctions on a Li2B4O7 crystal
336
Development of a new “flow-through” sample cup for the vertical micro-furnace pyrolyzer to reduce undesirable secondary reactions and band broadening of resulting pyrolyzates
337
Development of a new abrasion tester based on planetary motion
338
Development of a new academic digital library: a study of usage data of a core medical electronic journal collection
339
Development of a new aerosol phase extraction method for metal determination through inductively coupled plasma atomic emission spectrometry
340
Development of a new airlift-driven raceway reactor for algal cultivation
341
Development of a New Alpha Function for the Peng–Robinson Equation of State: Comparative Study of Alpha Function Models for Pure Gases (Natural Gas Components) and Water-Gas Systems
342
Development of a new analytical approach based on cellulose membrane and chelator for differentiation of labile and inert metal species in aquatic systems Original Research Article
343
Development of a new analytical method for online simultaneous qualitative determination of aluminium (free aluminium ion, aluminium-fluoride complexes) by HPLC-FAAS
344
Development of a new analytical method for the determination of fumonisins B1 and B2 in food products based on high performance liquid chromatography and fluorimetric detection with post-column derivatization
345
Development of a new analytical method for the determination of sulfites in fresh meats and shrimps by ion-exchange chromatography with conductivity detection Original Research Article
346
Development of a new apparatus for contamination measurement of overhead transmission line insulators
347
Development of a new apparatus for ultrasonic vibration-assisted glass hot embossing process
348
Development of a new approach for deterministic supply chain network design
349
DEVELOPMENT OF A NEW APPROACH FOR HIGH-QUALITY QUADRUPLING FREQUENCY OPTICAL MILLIMETER-WAVE SIGNAL GENERATION WITHOUT OPTICAL FILTER
350
Development of a new approach for microbial decontamination of water using modified Fentonʹs reaction
351
Development of a New Approach to Earthquake Prediction: Load/Unload Response Ratio (LURR) Theory
352
Development of a New Aqueous Process for Nuclear Fuel Reprocessing: Hot Tests on the Recovery of U and Pu from a Nitric Acid Solution of Spent LWR Fuel
353
Development of a new assessment system for the applicability of digital projects in the oil and gas sector
354
Development of a new atropine sulfate bulk acoustic wave sensor based on a molecularly imprinted electrosynthesized copolymer of aniline with o-phenylenediamine Original Research Article
355
Development of a New Backward Directional Coupler Based on Perforated Substrates
356
Development of a new Bi–Di correlation for solids drying
357
Development of a new biochemical assay for assessing toxicity in invertebrate and fish sperm
358
Development of a new biodiesel that integrates glycerol, by using CaO as heterogeneous catalyst, in the partial methanolysis of sunflower oil
359
Development of a new bioethanol feedstock – Anaerobically digested fiber from confined dairy operations using different digestion configurations
360
Development of a new biomimetic sensor based on an FeIIIFeII complex for the determination of phenolic compounds
361
Development of a new biomonitoring method to detect the abnormal activity of Daphnia magna using automated Grid Counter device
362
Development of a new biosensor based on functionalized SBA-15 modified screen-printed graphite electrode as a nano-reactor for Gquadruplex recognition
363
Development of a new Biot number and lag factor correlation for drying applications
364
Development of a new biotic index to assess freshwater pollution
365
Development of a new bulk optode membrane for the determination of mercury(II) Original Research Article
366
Development of a new burr-free hydro-mechanical punching
367
Development of a new calcium phosphate cement that contains sodium calcium phosphate
368
Development of a new chemically modified carbon paste electrode for selective determination of urinary and serum oxalate concentration
369
Development of a new chromium reducing antioxidant capacity (CHROMAC) assay for plants and fruits
370
Development of a new class of (1S,3R,4R)-2-azabicyclo[2.2.1]heptane-oxazoline ligands and their application in asymmetric transfer hydrogenation
371
Development of a new class of C1-symmetric bisphosphine ligands for rhodium-catalyzed asymmetric hydrogenation
372
Development of a new class of photochromic peptides by using diarylethene-based non-natural amino acids
373
Development of a new class of potential antiatherosclerosis agents: NO-donor antioxidants
374
Development of a new clay supported polyethylenimine composite for CO2 capture
375
Development of a new cleaner production process for producing chromic oxide from chromite ore
376
Development of a new clean-up tandem assay column for the detection of ochratoxin A in roasted coffee Original Research Article
377
Development of a new coal washability index
378
Development of a new column switching method for simultaneous speciation of selenometabolites and selenoproteins in human serum
379
Development of a new combinatorial mask for addressable ternary phase diagramming: application to rare earth doped phosphors
380
Development of a new compositional model with multi-component sorption isotherm and slip flow in tight gas reservoirs
381
Development of a new compound method to extract the five parameters of PV modules
382
Development of a new concept solar-biomass cogeneration system
383
Development of a new consumable-free thermal modulator for comprehensive two-dimensional gas chromatography
384
Development of A New Correlation for Estimating Pressure Gradient of Oil- Water Two Phase Flow in A Horizontal Pipe
385
Development of a new Cr(VI)-biosorbent from agricultural biowaste
386
Development of a new creep testing equipment to obtain long-term deformation parameters of salt
387
Development of a new cyano-bonded column for high-performance liquid chromatography
388
Development of a new damper to reduce resonant vibrations in lightweight steel joist floors
389
Development of a new decay heat removal system for a high temperature gas-cooled reactor
390
Development of a new design of hip protectors using finite element analysis and mechanical tests
391
Development of a new design of valve-regulated lead–acid battery (new Model YT4B) for motorcycle use
392
Development of a new detection system for monitoring high-level tritiated water
393
Development of a new detector and DAQ systems for iBIX
394
Development of a new detector and DAQ systems for iBIX
395
Development of a new device to control oblique waves in transitional boundary layers
396
Development of a new device to perform torsional ultrasonic fatigue testing
397
Development of a new diagnostic method for galactosemia by high-performance anion-exchange chromatography with pulsed amperometric detection
398
Development of a new diagnostic protocol using a neuro-dynamical tool
399
Development of a new discharge control system for JT-60 with a unix workstation and a VME-bus system
400
Development of a new dispersive liquid–liquid microextraction method in a narrow-bore tube for preconcentration of triazole pesticides from aqueous samples Original Research Article
401
Development of a new DNA chip microarray by hydrophobic interaction
402
Development of a New DNA Chip Microarray Using RFSA Method
403
Development of a new DNA extraction protocol for PFGE typing of Mycobacterium tuberculosis complex
404
Development of a new durability index for compacted shale
405
Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process
406
Development of a new dynamometer for measuring grip strength applied on a cylindrical handle
407
Development of a new ecological concrete with CO2 emissions below zero
408
Development of a new electrochemical catalyst with an electrochemically assisted regeneration ability for H2 production at low temperatures
409
Development of a new electrochemical hydride generator with tungsten wire cathode for the determination of As and Sb by atomic fluorescence spectrometry
410
Development of a new electrochemical sensor based on modified carbon paste electrode for simultaneous determination of norepinephrine and acetaminophen in real samples
411
Development of A New Electrochemical Sensor based on Zr-MOF/MIP for Sensitive Diclofenac Determination
412
Development of a new electrodeposition method for Pu-determination in environmental samples
413
Development of a new electronic neutron imaging system
414
Development of a new electronic neutron imaging system
415
Development of a new electroplating solution for electrodeposition of Au–Co alloys
416
Development of a new empirical non-cubic equation of state
417
Development of a New Epitope Immunogenic Structure Based on the Coronavirus Membrane Glycoprotein M Using Immunoinformatics Tools
418
Development of a new EPR spin trap, DOD-8C (N-[4-dodecyloxy-2-(7′-carboxyhept-1′-yloxy)benzylidene]-N-tert-butylamine N-oxide), for the trapping of lipid radicals at a predetermined depth within biological membranes
419
Development of a new equation and validation of earlier resting energy expenditure predicting equations in adults living in Tehran
420
Development of a new equation of state for mixed salt and mixed solvent systems, and application to vapour–liquid and solid (hydrate)–vapour–liquid equilibrium calculations
421
Development of a New Experimental Technique for Dynamic Fracture Toughness Measurement of Rocks using drop Weight Test
422
Development of a new external heat exchanger for a circulating fluidized bed boiler
423
Development of a new fast shower maximum detector based on microchannel plates photomultipliers (MCP-PMT) as an active element
424
Development of a new fast shower maximum detector based on microchannel plates photomultipliers (MCP-PMT) as an active element
425
Development of a new FIA-potentiometric sensor for dopamine based on EVA-copper(II) ions
426
Development of a new finite element for composite delamination analysis
427
Development of a new finite element for plate and shell analysis by application of generalized approach to patch test
428
Development of a new first level trigger for the surface array in the Pierre Auger Observatory based on the CycloneTM Altera FPGA
429
Development of a new first level trigger for the surface array in the Pierre Auger Observatory based on the CycloneTM Altera FPGA
430
Development of a new flat stationary evacuated CPC-collector for process heat applications
431
Development of a new fluorescent probe for transition metal cations based upon fluorescence resonance energy transfer
432
Development of a new fluorescent probe for transition metal cations based upon fluorescence resonance energy transfer Original Research Article
433
Development of a new fluorescent sensor based on a triazolo-thiadiazin derivative immobilized in polyvinyl chloride membrane for sensitive detection of lead(II) ions
434
Development of a New Fluoride Colorimetric Sensor Based on Anti-aggregation of Modified Silver Nanoparticles
435
Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tertbutyl-1,3-benzexazole) for nickel(II) ions
436
Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions Original Research Article
437
Development of a new form for the alpha function of the Redlich–Kwong cubic equation of state
438
Development of a new fracture test to identify the critical energy release rate: The Tensile Flexure test on Notched Specimen
439
Development of a new frame finite element for crash analysis, using a mixed variational principle and rotations as independent variables
440
Development of a New Framework for Health Assessment in Patients with by using miRNA-197 in Adults Coronary Artery Disease
441
Development of a new free wake model considering a blade–vane interaction for a low noise axial fan planform optimization
442
Development of a new frequency weighting filter for the assessment of grinder exposure to wrist-transmitted vibration
443
Development of a new fusion power monitor based on activation of flowing water
444
Development of a new gas absorption chiller heater—advanced utilization of waste heat from gas-driven co-generation systems for air-conditioning
445
Development of a new gas chromatography–mass spectrometry (GC–MS) methodology for the evaluation of 5α-reductase activity
446
Development of a new gas sensor for binary mixtures based on the permselectivity of polymeric membranes Application to carbon dioxide/methane and carbon dioxide/helium mixtures
447
Development of a new gas sensor for binary mixtures based on the permselectivity of polymeric membranes. Application to oxygen/nitrogen mixture
448
Development of a new gas sensor for binary mixtures based on the permselectivity of polymeric membranes: Application to carbon dioxide/methane and carbon dioxide/helium mixtures Original Research Article
449
Development of a New Gas-Inducing Turbine Family: The Partially Shrouded Turbine
450
Development of a new generalized correlation to characterize physical properties of pure components and petroleum fractions
451
Development of a new generation of amorphous hard coatings based on the Si–B–C–N–O system for applications in extreme conditions
452
Development of a new generation of filament wound composite pressure cylinders
453
Development of a new generation of micropattern gaseous detectors for high energy physics, astrophysics and environmental applications
454
Development of a new generation of micropattern gaseous detectors for high energy physics, astrophysics and environmental applications
455
Development of a new generation of optical slope measuring profiler
456
Development of a new generation of optical slope measuring profiler
457
Development of a new graded-porosity FeAl alloy by elemental reactive synthesis Original Research Article
458
Development of a new high performance liquid chromatography method for measurement of coenzyme Q10 in healthy blood plasma
459
Development of a new high performance low pressure chromatographic system using a multisyringe burette coupled to a chromatographic monolithic column
460
Development of a new high porosity ceramic membrane for the treatment of bilge water Original Research Article
461
Development of a new high-performance liquid chromatography method with diode array and electrospray ionization-mass spectrometry detection for the metabolite fingerprinting of bioactive compounds in Humulus lupulus L.
462
Development of a new hollow-fiber module for large ultrafiltration plants Original Research Article
463
Development of a new homogenous photo-Fenton process using Fe(III)-EDDS complexes
464
Development of a new hybrid plasma torch for materials processing
465
Development of a new hybrid technique for estimating of relative uplift force in gravity dams based on whale optimization algorithm
466
Development of A new Hydraulic Relationship for Submerged Slide Gates
467
Development of a new hydraulic servo cylinder with mechanical feedback
468
Development of a new hydrocarbon index for oil-in-water
469
Development of a new hydrodemetallization catalyst for deep desulfurization of atmospheric residue and the effect of reaction temperature on catalyst deactivation
470
Development of a New Immunochromatographic Assay Using Gold Nanoparticles for Screening of IgA Deficiency
471
Development of a new immunotoxin from part of the scorpion venom for the treatment of breast cancer
472
Development of a new in vitro method to evaluate the photoprotective sunscreen activity of plant extracts against high UV-B radiation
473
Development of a new in vitro model of elastic fiber assembly in human pigmented epithelial cells
474
Development of a new index for the assessment of hydromorphological alterations of the Mediterranean rocky shore
475
Development of a new index to assess river regime impacts after dam construction
476
Development of a New Indirect ELISA Method for Detection of Anti-Tuberculosis Antibodies in Human Serum
477
Development of a new inexpensive green thermoplastic composite and evaluation of its physico-mechanical and wear properties
478
Development of a new integrated method for generation of IDF curves based on three scenarios of climatic changes
479
Development of a new integrated surrogate safety measure for applying in intelligent vehicle systems
480
Development of a New Interferometric Measurement System for Determining the Main Characteristics of Gauge Blocks
481
Development of a new ion-selective field-effect transistor sensor for anionic surfactants: Application to potentiometric titrations Original Research Article
482
Development of a new jet mill for very fine mineral grinding
483
Development of a new laboratory evaporation measurement device as decision support for evaporation-optimized building
484
Development of a new lapping method for high precision ball screw (1st report)-feasibility study of a prototyped lapping tool for automatic lapping process
485
Development of a new lapping method for high precision ball screw (2nd report): Design and experimental study of an automatic lapping machine with in-process torque monitoring system
486
Development of a new lean burning combustor with fuel film evaporation for a micro gas turbine
487
Development of a new lean lubrication system for near dry machining process
488
Development of a new linker for the solid-phase synthesis of N-hydroxylated and N-methylated secondary amines
489
Development of a new LOPAP instrument for the detection of O3 in the atmosphere
490
Development of a new low-cost procedure for wind farm maintenance with a view to decrease soil pollution
491
Development of a new low-temperature methanol synthesis process
492
Development of a new magnesium alloy ZW21
493
Development of a new management strategy for the control of root-knot nematodes (Meloidogyne spp) in organic vegetable production
494
Development of a new masters program for occupational physicians in Flanders
495
Development of a new mathematical model for inactivation of Escherichia coli O157:H7 and Staphylococcus aureus by high hydrostatic pressure in carrot juice and peptone water Original Research Article
496
Development of a new mechanism to change velocity in a helical swimmer robot at low Reynolds number
497
Development of a new meshless — point weighted least-squares (PWLS) method for computational mechanics
498
Development of a New Method Based on Chiral Ligand-Exchange Chromatography for the Enantioseparation of Propranolol
499
Development of a New Method for Analysis of Oil Mists
500
Development of a new method for determination of aluminum (Al) in Jordanian foods and drinks: Solid phase extraction and adsorption of Al3+-d-mannitol on carbon nanotubes
501
Development of a new method for determination of aluminum (Al) in Jordanian foods and drinks: Solid phase extraction and adsorption of Al3+-d-mannitol on carbon nanotubes
502
Development of a new method for determination of exopolysaccharide quantity in fermented milk products and its application in technology of kefir production
503
Development of a new method for determination of total haem protein in fish muscle
504
Development of a new method for evaluating cyclone efficiency
505
Development of a new method for evaluating vortex length in reversed flow cyclone separators
506
Development of a new method for fast measurement of water sorption isotherms in the high humidity range Validation on gelatine gel Original Research Article
507
Development of a new method for sperm RNA purification in the chicken
508
Development of a new method for sulfide determination by vapor generator–inductively coupled plasma–mass spectrometry
509
Development of a new method for sulfide determination by vapor generator–inductively coupled plasma–mass spectrometry
510
Development of a new method for the determination of nitrosamines by micellar electrokinetic capillary chromatography
511
Development of a new method for the enantiomer specific determination of HBCD using an ion trap mass spectrometer Original Research Article
512
Development of a new method for the noninvasive measurement of deep body temperature without a heater
513
Development of a New Method in Exergy Analysis of a CSP Plant
514
Development of a New Method of Sensitivity Matrix for Image Reconstruction in Electric Charge Tomography System Using Finite Element Method
515
Development of a new method to estimate the regional and local contributions to black carbon
516
development of a new methodology for lincomycin.hci (lino.hci) determination using phosphomolybdic acid (pma) as a reagent and isnag-fluorimeter instrument via cfia
517
Development of a new methodology to integrate ELV treatment limits into requirements for metal automotive part design
518
Development of a new methodology to obtain the characteristic pump curves that minimize the total cost at pumping stations
519
Development of a new micro reaction sampler for pyrolysis-GC/MS system facilitating on-line analytical chemolysis of intractable condensation polymers
520
Development of a new micro reaction sampler for pyrolysis-GC/MS system facilitating on-line analytical chemolysis of intractable condensation polymers
521
Development of a new microextraction method based on a dynamic single drop in a narrow-bore tube: Application in extraction and preconcentration of some organic pollutants in well water and grape juice samples
522
Development of a new microextraction method based on elevated temperature dispersive liquid–liquid microextraction for determination of triazole pesticides residues in honey by gas chromatography-nitrogen phosphorus detection
523
Development of a new micromixer based on split/recombination for mass production and its application to soap free emulsifier
524
Development of a New Microreactor Based on Annular Microsegments for Fine Particle Production
525
Development of a new minimum avoidance system for a behavior-based mobile robot
526
Development of a New Mining Intrinsically Safe DC Electrical Prospecting Apparatus
527
Development of a new model for biodiesel viscosity prediction based on the principle of corresponding state
528
Development of a new model of actinic enteritis in rats using a cobalt-60 open source and a protection device as a collimator
529
Development of a New Model to Estimate the Technical Quality of Sugar Beet in the Semi – Arid Climate
530
Development of a new model to predict gas viscosity using artificial neural networks
531
Development of a new model to predict indoor daylighting: Integration in CODYRUN software and validation
532
Development of a new moisture transfer (Bi–Re) correlation for food drying applications
533
Development of a new molecular dynamics method for tribochemical reaction and its application to formation dynamics of MoS2 tribofilm
534
Development of a new monoclonal antibody based direct competitive enzyme-linked immunosorbent assay for detection of brevetoxins in food samples
535
Development of a new monoclonal antibody to ovine chimeric IgE and its detection of systemic and local IgE antibody responses to the intestinal nematode Trichostrongylus colubriformis
536
Development of a new monoclonal antibody to ovine chimeric IgE and its detection of systemic and local IgE antibody responses to the intestinal nematode Trichostrongylus colubriformis
537
Development of a new Monte Carlo simulation system on positron behavior in matter
538
Development of a new multi-grid-type microstrip gas chamber
539
Development of a new multi-grid-type microstrip gas chamber
540
Development of a new multiple sampling trawl with autonomous opening/closing net control system for sampling juvenile pelagic fish
541
Development of a new multi-residue laser diode thermal desorption atmospheric pressure chemical ionization tandem mass spectrometry method for the detection and quantification of pesticides and pharmaceuticals in wastewater samples Original Research Artic
542
Development of a new neuropsychological test battery
543
Development of a new neutron monitor using a boron-loaded organic liquid scintillation detector
544
Development of a new neutron monitor using a boron-loaded organic liquid scintillation detector
545
Development of a new niobium-based alloy for vascular stent applications
546
Development of a new non-destructive testing technique for quantitative evaluations of delamination defects in concrete structures based on phase delay measurement using lock-in thermography
547
Development of a new nonlinear numerical material model for woven composite materials accounting for permanent deformation and damage
548
Development of a new oat-based probiotic drink
549
Development of a new off-line test procedure for low voltage rotating machines fed by adjustable speed drives (ASD)
550
Development of a new on-line mass spectrometer to study the reactivity of soluble organic compounds in the aqueous phase under tropospheric conditions: Application to OH-oxidation of N-methylpyrrolidone
551
Development of a new on-line synchronous generator simulator using personal computer for excitation system studies
552
Development of a new on-line system for the sequential speciation and determination of chromium species in various samples using a combination of chelating and ion exchange resins
553
Development of a new organic composite coating for enhancing corrosion resistance of 55% Al–Zn alloy coated steel sheet
554
Development of a new oxidation stability test method for lubricating oils using high-pressure differential scanning calorimetry
555
Development of a new peel-stopper for sandwich structures
556
Development of a new photo-detector readout technique for PET and CT imaging
557
Development of a new photo-detector readout technique for PET and CT imaging
558
Development of a new photoinitiation system for dental light-cure composite resins
559
Development of a new photomultiplier tube with high sensitivity for a wavelength-shifter fiber readout
560
Development of a new photomultiplier tube with high sensitivity for a wavelength-shifter fiber readout
561
Development of a new photopolymerizable membrane for monochloroacetate sensitive potentiometric sensors Original Research Article
562
Development of a new pH-swing CO2 mineralization process with a recyclable reaction solution
563
Development of a new pilot scale production of high grade oil palm plywood: Effect of pressing pressure
564
Development of a new plasticizer for poly(ethylene oxide)-based polymer electrolyte and the investigation of their ion-pair dissociation effect
565
Development of a new polymer membrane — PVB/PVDF blended membrane
566
Development of a new porous metal support of metallic dense membrane for hydrogen separation
567
Development of a new precision internal machining process using an alternating magnetic field
568
Development of a new predictive modelling technique to find with confidence equivalence zone and design space of chromatographic analytical methods
569
Development of a new procedure for precise determination of viral aerosol lethal dose (ALD50) for birds
570
Development of a new procedure for the experimental determination of the Forming Limit Curves
571
Development of a new process in high functioning ceramic core without shape deformation
572
Development of a new protein labeling strategy, oxidation labeling. part 1: Preliminary evaluation and synthesis of tautomycin containing a metal coordinating unit
573
Development of a new protocol for the isolation and quantification of Arcobacter species from poultry products
574
Development of a new proximate analysis based correlation to predict calorific value of coal
575
Development of a New Psychometric Assessment Tool for Predicting Hepatitis B Virus Infection in Pregnant Women
576
Development of a new quadratic shell element considering the normal stress in the thickness direction for simulating sheet metal forming
577
Development of a new quadrilateral thin plate element using area coordinates Original Research Article
578
Development of a new qualification method for photocatalytically active surfaces based on a solid state luminescent dye
579
Development of a new quality fair access best value performance indicator (BVPI) for recycling services
580
Development of a new quantification method for a fire PSA
581
Development of a new quantification method for a fire PSA
582
Development of a new quantification method using partial volume effect correction for individual energy peaks in 111In-pentetreotide SPECT/CT
583
Development of a new QuEChERS method based on dry ice for the determination of 168 pesticides in paprika using tandem mass spectrometry
584
Development of a new radiation detector utilizing carbon nanotube as anode
585
Development of a new radiation detector utilizing CNTs as anodes
586
Development of a new radioligand for cholecystokinin receptor subtype 2 scintigraphy: From molecular modeling to in vivo evaluation Original Research Article
587
Development of a new rapid characterization method of hobʹs wear resistance in gear manufacturing—Application to the evaluation of various cutting edge preparations in high speed dry gear hobbing
588
Development of a new rapid method to measure erosion rates in laboratory and pilot plant cyclones
589
Development of a new reflectance technique to investigate the mechanism of emulsification Original Research Article
590
Development of a new rotary demister
591
Development of a New RP-UPLC Method for the Determination of Rabeprazole Sodium in Pharmaceutical Formulation and Application in Dissolution Studies
592
Development of a new sample pretreatment procedure based on pressurized liquid extraction for the determination of fluoroquinolone residues in table eggs
593
Development of a new sample pre-treatment procedure based on pressurized liquid extraction for the determination of metals in edible seaweed Original Research Article
594
Development of a new self-awareness of falls risk measure (SAFRM)
595
Development of a new semi analytical model for prediction of bubble point pressure of crude oils
596
Development of a New Sensitive Electrochemical Sensor for Dapsone Detection using a Cobalt Metal-Organic Framework/Molecularly Imprinted Polymer Nanostructures
597
Development of a new sequential block finding strategy for detection of conserved sequences in riboswitches
598
Development of a new sequential injection in-line cloud point extraction system for flame atomic absorption spectrometric determination of manganese in food samples
599
Development of a new series of polyamine-type polymeric surfactants used for emulsion liquid membranes
600
Development of a new simulation model of spin coating process and its application to optimize the 450 mm wafer coating process
601
Development of a new skeletal mechanism for n-decane oxidation under engine-relevant conditions based on a decoupling methodology
602
Development of a new software for adaptive crack growth simulations in 3D structures
603
Development of a New Software to Transmit the Audio Signals without Server-Based
604
Development of a new solar thermal engine system for circulating water for aeration
605
Development of a new spray/wall interaction model
606
Development of a new structural prepreg: characterisation of handling, drape and tack properties
607
Development of a new styrene copolymer membrane for recycling of polyester fibre dyeing effluent
608
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics
609
Development of a New SWOT-MCDM Model to Create Marketing and Financial Strategies in Conditions of Uncertainty (Case Study of Iralco Company)
610
Development of a new synthesized adsorbent for refrigeration and air conditioning applications
611
Development of a new system for improving blastability by using the Fuzzy Delphi AHP method
612
Development of a new technique to predict reverse osmosis fouling
613
DEVELOPMENT OF A NEW TECHNOLOGY FOR ELECTRO/IMPULSE HARDENING OF TOOL STEELS
614
Development of a new technology for the production of microcapsules based in atomization processes
615
Development of a new technology of deformable mirror for ultra intense laser applications
616
Development of a new technology of deformable mirror for ultra intense laser applications
617
Development of a new technology product evaluation model for assessing commercialization opportunities using Delphi method and fuzzy AHP approach
618
Development of a new temperature measuring system for gas–liquid flow in spraying field
619
Development of a new ternary photoluminescence enhancement system of Eu–N-(2-hydroxy-1-naphthaldehyde)-1,8-diaminonaphthalene–1,10-phenanthroline for trace determination of Eu3+
620
Development of a new test system to determine penetration of multi-walled carbon nanotubes through filtering facepiece respirators
621
Development of a new tissue-equivalent material applied to optimizing surgical accuracy
622
Development of a new tool for the selection of pervaporation membranes for the separation of fusel oils from ethanol/water mixtures
623
Development of a new total reflection X‐ray fluorescence instrument using polycapillary X‐ray lens
624
Development of a new traceable areal surface texture measuring instrument
625
Development of a new traceless aniline linker for combinatorial solid-phase parallel synthesis of rod-shaped liquid crystals with an azomethine linkage
626
Development of a new traceless aniline linker for solid-phase synthesis of azomethines. Application to parallel synthesis of a rod-shaped liquid crystalline library
627
Development of a New Truss Quadratic Quadrilateral Macro-Element
628
Development of a new two-dimensional position-sensitive detection based on resistive charge division and using CdTe detectors for a high-resolution semiconductor-based PET scanning
629
Development of a new two-dimensional position-sensitive detection based on resistive charge division and using CdTe detectors for a high-resolution semiconductor-based PET scanning
630
Development of a New Two-Phase Fluid Atomizer Nozzle in Pilot Scale for Fluid Catalytic Cracking Process
631
Development of a new type of electric off-road vehicle powered by microwaves transmitted through air
632
Development of a new type of imaging plate for neutron detection
633
Development of a new type of imaging plate for neutron detection
634
Development of a new type of SiGe thin strain relaxed buffer based on the incorporation of a carbon-containing layer
635
Development of a new type of thermogravimetric analyser with a mini-tapered fluidized bed. Effect of fluidization of particles on the stability of the system
636
Development of a new ultrafine grained dual phase steel and examination of the effect of grain size on tensile deformation behavior
637
Development of a new ultraporous polymer as support in organic synthesis
638
Development of a New Variable Remote Center Compliance (VRCC)With Modified Elastomer Shear Pad (ESP) for Robot Assembly
639
Development of a new variable repetitive group sampling plan based on EWMA yield index
640
Development of a new-type suspension spring for rally cars
641
Development of a nickel–polymer composite by using friendly environmental polymeric surfactant
642
Development of a niobium clad PEM fuel cell bipolar plate material
643
Development of a NMLFPE (non-monochromatic lightwave Fabry-Perot etalon) for smart structure sensor applications
644
Development of a NMLFPE (non-monochromatic lightwave Fabry-Perot etalon) for smart structure sensor applications
645
Development of a NO2 scrubber for accurate sampling of ambient levels of terpenes
646
Development of a nodal effective load model considering transmission system element unavailabilities
647
Development of a Noise Prediction Model Based on Advanced Fuzzy Approaches in Typical Industrial Workrooms
648
Development of a noise sources classification system based on new method for feature selection
649
Development of a non lethal sampling method to monitor immune response and disease progression in salmonid fish
650
Development of a non-adiabatic two-coil spin flipper for a polarised thermal neutron diffractometer with a 3He spin filter
651
Development of a non-adiabatic two-coil spin flipper for a polarised thermal neutron diffractometer with a 3He spin filter
652
Development of a non-chromatographic method for the speciation analysis of inorganic antimony in mushroom samples by hydride generation atomic fluorescence spectrometry
653
Development of a non-chromatographic method for the speciation analysis of inorganic antimony in mushroom samples by hydride generation atomic fluorescence spectrometry
654
Development of a non-commercial sugar-free barbecue sauce
655
Development of a non-competitive immunoassay for cortisol and its application to the analysis of saliva Original Research Article
656
Development of a non-competitive immunoassay for monitoring DDT, its metabolites and analogues in water samples
657
Development of a non-competitive immunoassay for monitoring DDT, its metabolites and analogues in water samples Original Research Article
658
Development of a non-denaturing 2D gel electrophoresis protocol for screening in vivo uranium-protein targets in Procambarus clarkii with laser ablation ICP MS followed by protein identification by HPLC–Orbitrap MS
659
Development of a non-derivatization high-performance liquid chromatography method with resonance Rayleigh scattering detection for the detection of sisomicin in rat serum
660
Development of a non-destructive neutron radiography technique to measure the three-dimensional soot deposition profiles in diesel engine exhaust systems
661
Development of a non-destructive salt and moisture measurement method in salmon (Salmo salar) fillets using impedance technology
662
Development of a non-destructive testing technique using ultrasonic wave for evaluation of irradiation embrittlement in nuclear materials
663
Development of a non-ideal plasma target for non-linear beam–plasma interaction experiments
664
Development of a non-ideal plasma target for non-linear beam–plasma interaction experiments
665
Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting: Effect of the process parameters
666
Development of a Non-Invasive Bio-Acoustics Measurement System for Assessing Articular Cartilage Knee Joint Problem
667
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method
668
Development of a non-labeled immunosensor for the herbicide trifluralin via optical waveguide lightmode spectroscopic detection Original Research Article
669
Development of a Non-linear Levels Model and its Application to Bora-driven Circulation on the Adriatic Shelf
670
Development of a nonlinear near-wall turbulence model for turbulent flow and heat transfer
671
Development of a non-linear triangular prism solid-shell element using ANS and EAS techniques
672
Development of a Non-Radial Network Model to Evaluate the Performance of a Multi-Stage Sustainable Supply Chain
673
Development of a Non-radioactive Dot-blot Hybridisation Assay for the Detection of Pelargonium Flower Break Virus and Pelargonium line Pattern Virus
674
Development of a non-radioactive endpoint in a modified local lymph node assay
675
Development of a non-reflecting boundary condition for multidimensional nonlinear duct acoustic computation
676
Development of a non-supervised and automatic method for detecting land cover changes in urban areas by using radar and optic data
677
Development of a non-triangular separation region for improving the performance of a three-zone simulated moving bed chromatography for binary separation with linear isotherms
678
Development of a non-uniform-current model for predicting transient thermal behavior of thermoelectric coolers
679
Development of a novel 2-stage entrained flow coal dry powder gasifier
680
Development of a novel 32P-postlabeling method for the analysis of 3′-azido-3′-deoxythymidine
681
Development of a novel 5-DOF controlled maglev local actuator for high-speed electrical discharge machining
682
Development of a novel 6351 Al–(Al4SiC4+SiC) hybrid composite with enhanced mechanical properties
683
Development of a novel albumin-binding prodrug that is cleaved by urokinase-type-plasminogen activator (uPA)
684
Development of a novel alkaline zinc–iron plating bath containing sorbitol and the chemical, physical and morphological characterization of the Zn–Fe films
685
Development of a novel aluminum-free glass ionomer cement based on magnesium/strontium-silicate glasses
686
Development of a novel amide-silica stationary phase for the reversed-phase HPLC separation of different classes of phytohormones
687
Development of a novel amperometric glucose biosensor based on copolymer of pyrrole-PAMAM dendrimers
688
Development of a novel analytical method for determination of chondroitin sulfate using an in-capillary enzyme reaction
689
Development of a Novel and Efficient HCDC Process for heterologous production of Ambystoma Mexicanum Epidermal Lipoxygenase (AmbLOXe) in E. coli
690
Development of a novel and specialized cultivation method for isolating Helicobacter pullorum from chicken meat
691
Development of a Novel Anti-Adhesive Vaccine Against Pseudomonas aeruginosa Targeting the C-terminal Disulfide Loop of the Pilin Protein
692
Development of a novel antimicrobial film based on chitosan with LAE (ethyl-Nα-dodecanoyl-l-arginate) and its application to fresh chicken
693
Development of a Novel Anti-Obesity Compound with Inhibiting Properties on the Lipid Accumulation in 3T3-L1 Adipocytes
694
Development of a novel approach for secondary modelling in predictive microbiology: incorporation of microbiological knowledge in black box polynomial modelling
695
Development of a novel approach to determine heating pattern using computer vision and chemical marker (M-2) yield Original Research Article
696
Development of a novel approach, the epigenome-based outlier approach, to identify tumor-suppressor genes silenced by aberrant DNA methylation
697
Development of a novel articulator that reproduced jaw movement with six-degree-of-freedom
698
Development of a Novel Basket Impeller Dualflow Tray Catalytic Distillation Reactor
699
Development of a novel binder system for manufacture of ceramic heart valve prostheses
700
Development of a novel binderless diamond grinding wheel for machining IC chips for failure analysis
701
Development of a novel bioassay for evaluating of the infectivity and between generation transmission effects of entomopathogenic fungi Beauvaria bassiana (Balsamo) Vuilleminon on population of Sawtoo
702
DEVELOPMENT OF A NOVEL BIOBEVERAGE – BIOFEVITA
703
Development of a novel biosensor based on a conducting polymer
704
Development of a novel candidate subunit vaccine against Grass carp reovirus Guangdong strain (GCRV-GD108)
705
Development of a novel cascading TPV and TE power generation system
706
Development of a novel catalytic burner for natural gas combustion for gas stove and cooking plate applications
707
Development of a novel catalytic distillation column
708
Development of a novel cathodic plasma/electrolytic deposition technique part 1: Production of titanium dioxide coatings
709
Development of a novel cathodic plasma/electrolytic deposition technique: Part 2: Physico-chemical analysis of the plasma discharge
710
Development of a novel chemical water shut-off method for fractured reservoirs: Laboratory development and verification through core flow experiments
711
Development of a novel chemiluminescent probe, 4-(5ʹ,6ʹ-Dimethoxybenzothiazolyl) phthalhydrazide
712
Development of a novel chromosome dissection chip for chromosomal analysis with nanometer size
713
Development of a novel chromosome dissection chip for chromosomal analysis with nanometer size
714
Development of a novel collagen–GAG nanofibrous scaffold via electrospinning
715
Development of a novel colorimetric indicator label for monitoring freshness of intermediate-moisture dessert spoilage
716
Development of a novel colorimetric indicator pad for detecting aldehydes
717
Development of a Novel Combined Catalyst and Sorbent for Hydrocarbon Reforming
718
Development of a novel combustion synthesis method for synthesizing of ceramic oxide powders
719
Development of a novel common-rail type Dimethyl ether (DME) injector
720
Development of a novel composite aluminum anode
721
Development of a novel computational tool for optimizing the operation of fuel cells systems: Application for phosphoric acid fuel cells
722
Development of a novel decal transfer process for fabrication of high-performance and reliable membrane electrode assemblies for PEMFCs
723
Development of a novel dental shade determination application
724
Development of a novel device for applying uniform doses of electron beam irradiation on carcasses
725
Development of a novel direction-position sensing fast neutron detector using tensioned metastable fluids
726
Development of a novel direction-position sensing fast neutron detector using tensioned metastable fluids
727
Development of a novel DNA detection system for real-time detection of DNA hybridization
728
Development of a novel DNA detection system for real-time detection of DNA hybridization
729
DEVELOPMENT OF A NOVEL DRUG-COATED STENT USING CURCUMIN AS ANTIPROLIFERATIVE DRUG
730
Development of a Novel Echocardiography Ramp Test for Speed Optimization and Diagnosis of Device Thrombosis in Continuous-Flow Left Ventricular Assist Devices: The Columbia Ramp Study
731
Development of a novel economical device to improve post-harvest processing practices on small farms
732
Development of a novel electric field-assisted modified hydrodynamic cavitation system for disintegration of waste activated sludge
733
Development of a novel electric field-assisted modified hydrodynamic cavitation system for disintegration of waste activated sludge
734
Development of a novel electrochemical cell for slab optical waveguide spectroscopy for in situ observation of methylene blue and anions on an electrode/electrolyte interface
735
Development of a novel electrokinetically driven microfluidic immunoassay for the detection of Helicobacter pylori Original Research Article
736
Development of a novel electrophoresis-UV grafting technique to modify PES UF membranes used for NOM removal
737
Development of a novel ELISA for human insulin using monoclonal antibodies produced in serum-free cell culture medium
738
Development of a novel enzyme/semiconductor nanoparticles system for biosensor application
739
Development of a novel epitaxial-layer segmentation method for optoelectronic device fabrication
740
Development of a novel europium(III) complex-based luminescence probe for time-resolved luminescence imaging of the nitric oxide production in neuron cells
741
Development of a Novel Floating In-situ Gelling System for Stomach Specific Drug Delivery of the Narrow Absorption Window Drug Baclofen
742
Development of a novel flow injection liquid–liquid microextraction method for the on-line separation and preconcentration for determination of zinc(II) using 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane as a sensitive and selective
743
Development of a novel fluidized bed ash cooler for circulating fluidized bed boilers: Experimental study and application
744
Development of a novel fluorescent probe for fluorescence correlation spectroscopic detection of kinase inhibitors
745
Development of a novel fluorescent sensor to detect a specific range of pH
746
Development of a novel fluorescent tag O-2-[aminoethyl]fluorescein for the electrophoretic separation of oligosaccharides Original Research Article
747
Development of a novel fluorimetric bulk optode membrane based on meso-tetrakis(2-hydroxynaphthyl) porphyrin (MTHNP) for highly sensitive and selective monitoring of trace amounts of Hg2 + ions
748
Development of a novel gas sensor based on oxide thick films
749
Development of A Novel Gene Expression System for Secretory Production of Heterologous Proteins via the General Secretory (Sec) Pathway in Corynebacterium glutamicum
750
Development of a novel gene transfer system for Cajanus cajan and expression of a monocot arginine decarboxylase cDNA in transformed cell lines
751
Development of a Novel Growth Model Based on the Central Limit Theorem for the Determination of Beef Spoilage
752
Development of a Novel Hapten for Radioimmunoassay of the Lignan, Enterolactone in Plasma (Serum). Total Synthesis of (±)-trans-5-Carboxymethoxyenterolactone and Several Analogues
753
Development of a novel high optical quality ZnO thin films by PLD for III–V opto-electronic devices
754
Development of a novel high performance filtration system — Application for various hardly filterable materials
755
Development of a novel high performance filtration system — Optimization of operating conditions
756
Development of a novel high speed (electron-mobility) epi-n-ZnO thin films by L-MBE for III–V opto-electronic devices
757
Development of a novel high volume band compression injector for the analysis of complex samples like toxaphene pesticide
758
Development of a Novel Human Single Chain Antibody Against EGFRVIII Antigen by Phage Display Technology
759
Development of a novel hybrid aluminum-based composite with enhanced properties
760
Development of a novel hydrate-based refrigeration system: A preliminary overview
761
Development of a novel hydrophobic/hydrophilic double micro porous layer for use in a cathode gas diffusion layer in PEMFC
762
Development of a novel inherently stabilised honeycomb-type membrane module Original Research Article
763
Development of a Novel Inhibitory Chimeric Anti-HER2 Monoclonal Antibody
764
Development of a novel integrated continuous reactor system for biocatalytic production of biodiesel
765
Development of a novel ion energy analyser to measure the energy distribution function f(v∩, v|) of end-loss ions from FRC plasmas
766
Development of a novel ionic support and its application in the ionic liquid phase assisted synthesis of a potent antithrombotic
767
Development of a novel ketoprofen transdermal patch: Effect of almond oil as penetration enhancers on in-vitro and ex-vivo penetration of ketoprofen through rabbit skin
768
Development of a novel label-free amperometric immunosensor for the detection of okadaic acid Original Research Article
769
Development of a novel label-free amperometric immunosensor for the detection of okadaic acid Original Research Article
770
Development of a novel lateral force-sensing microindentation technique for determination of interfacial bond strength Original Research Article
771
Development of a novel LC/MS method to quantitate cellular stearoyl-CoA desaturase activity Original Research Article
772
Development of a novel LC–MS/MS method for the determination of letosteine in human plasma and its application on pharmacokinetic studies
773
Development of a novel liquid chromatography — Evaporative light scattering detection method for bacitracins and applications to quality control of pharmaceuticals Original Research Article
774
Development of a novel live vaccine delivering enterotoxigenic Escherichia coli fimbrial antigens to prevent post-weaning diarrhea in piglets
775
Development of a novel live vaccine delivering enterotoxigenic Escherichia coli fimbrial antigens to prevent post-weaning diarrhea in piglets
776
Development of a Novel Lot-sizing Model with Variable Lead Time in Supply Chain Environment
777
Development of a novel lot-sizing model with variable lead time in supply chain environment
778
Development of a novel low-flow ion source/sampling cone geometry for inductively coupled plasma mass spectrometry and application in hyphenated techniques
779
Development of a novel low-flow ion source/sampling cone geometry for inductively coupled plasma mass spectrometry and application in hyphenated techniques
780
Development of a novel macrostructured cathode for large-area neutron detectors based on the 10B-containing solid converter
781
Development of a novel macrostructured cathode for large-area neutron detectors based on the 10B-containing solid converter
782
Development of a novel magnesium–copper based composite with improved mechanical properties
783
Development of a novel market forecasting tool and its application to hydrogen energy production in Scotland
784
Development of a novel meshless Local Kriging (LoKriging) method for structural dynamic analysis Original Research Article
785
Development of a novel meso-scale vapor compression refrigeration system (mVCRS)
786
Development of a novel method based on liquid chromatography–evaporative light scattering detection for the direct determination of streptomycin and dihydrostreptomycin in raw materials, pharmaceutical formulations, culture media and plasma
787
Development of a novel method combining HPLC fingerprint and multi-ingredients quantitative analysis for quality evaluation of traditional chinese medicine preparation
788
Development of a novel method for Copper sorption: An application of Taguchi Method
789
Development of a novel method for detecting the integrity of aseptic paperboard laminate packages containing aluminium foil
790
Development of a novel method for hot-pressure extraction of protein from chicken bone and the effect of enzymatic hydrolysis on the extracts
791
Development of a novel method for isolating and detecting Cryptosporidium parvum from lean and fat beef carcass surfaces Original Research Article
792
Development of a novel method for mechanical plating using ultrasonic vibrations
793
Development of a novel method for monitoring the antioxidative effect of ascorbic acid in rat blood
794
Development of a novel method for screening of estrogenic compounds using nano-sized bacterial magnetic particles displaying estrogen receptor Original Research Article
795
Development of a novel method for surgical implant design optimization through noninvasive assessment of local bone properties
796
Development of a Novel Method in TRMC for a Binary Gas Flow Inside a Rotating Cylinder
797
Development of a novel method of tube bending using finite element simulation
798
Development of a novel method to measure the film thickness of cured can coatings Original Research Article
799
Development of a novel method to prepare Fe- and Al-doped TiO2 from wastewater
800
Development of a novel methodology for indoor emission source identification
801
Development of a Novel Methodology To Validate Optimal Sterilization Conditions for Maximizing the Texture Quality of White Beans in Glass Jars
802
Development of a Novel Methodology To Validate Optimal Sterilization Conditions for Maximizing the Texture Quality of White Beans in Glass Jars
803
Development of a novel microarray methodology for the study of SNPs in the promoter region of the TNF-α gene—Their association with obstructive pulmonary disease in Greek patients
804
Development of a novel micro-assay for evaluation of peroxyl radical scavenger capacity: Application to carotenoids and structure–activity relationship
805
Development of a novel microextraction by packed sorbent-based approach followed by ultrahigh pressure liquid chromatography as a powerful technique for quantification phenolic constituents of biological interest in wines
806
Development of a Novel Modular and Agile Face Machining Technology
807
Development of a novel mouse osteoclast culture system including cells of mandibular body and erupting teet h
808
Development of a novel multi-capillary, multi-temperature commercial refrigerator cabinet with common low-pressure receiver
809
Development of a Novel Multi-Epitope Vaccine Candidate against Streptococcus Iniae Infection in Fish: An Immunoinformatics Study
810
Development of a novel multiplex PCR assay for the identification of Salmonella enterica Typhimurium and Enteritidis
811
Development of a novel MWCNTs–triazene-modified carbon paste electrode for potentiometric assessment of Hg(II) in the aquatic environments
812
Development of a Novel Niosomal Formulation for Gabapentin
813
Development of a novel nucleoside analogue with S-type sugar conformation: 2′-deoxy-trans-3′,4′-bridged nucleic acids
814
Development of a novel optimization tool for electron linacs inspired by artificial intelligence techniques in video games
815
Development of a novel optimization tool for electron linacs inspired by artificial intelligence techniques in video games
816
Development of a novel particle size control system for hammer milling
817
Development of a novel phase-field method for local stress-based shape and topology optimization
818
Development of a novel photocatalytic reaction system for oxidative decomposition of volatile organic compounds in water with enhanced aeration
819
Development of a novel pixel-level signal processing chain for fast readout 3D integrated CMOS pixel sensors
820
Development of a novel pixel-level signal processing chain for fast readout 3D integrated CMOS pixel sensors
821
Development of a novel portable-size PEMFC short stack with electrodeposited Pt hydrogen diffusion anodes
822
Development of a novel pressure sensing material based on polypyrrole-coated electrospun poly(vinylidene fluoride) fibers
823
Development of a novel pressure swing adsorption dehydration system for the preservation of dermal tissue
824
Development of a Novel Probiotic Yogurt “PENTOYO” with a Fully Sequenced Lactobacillus pentosus KCA1 and its Survival during Storage at 4°C
825
Development of a novel process for biodiesel production from palm fatty acid distillate (PFAD)
826
Development of a novel pulse wave velocity measurement system: Using dual piezoelectric elements
827
Development of a novel PVC-membrane fluorescent sensor based on N,N′-bis(dansylamidoethyl)-N,N′-bis(2-pyridylmethyl)propylene-diamine as a new fluoroionophore for highly sensitive and selective monitoring of trace amounts of La3+ ions in aqueous solutions
828
Development of a novel pyrolysis-gas chromatography/mass spectrometry method for the analysis of poly(lactic acid) thermal degradation products
829
Development of a novel pyrolysis-gas chromatography/mass spectrometry method for the analysis of poly(lactic acid) thermal degradation products
830
Development of a novel radial cathode flow field for PEMFC
831
Development of a novel reactor for the oxidative degradation of straw
832
Development of a novel refrigeration system for refrigerated trucks incorporating phase change material
833
Development of a novel rhodamine-type fluorescent probe to determine peroxynitrite
834
Development of a novel roving-treatment process employing sequential chelating agent and enzymatic stages, utilising thermal analysis for assessment of fibre and yarn quality
835
Development of a novel Ru-based catalyst system for the selective oxidation of CO in hydrogen rich gas mixtures Original Research Article
836
Development of a novel running buffer for the simultaneous determination of nitrate and nitrite in human serum by capillary zone electrophoresis
837
Development of a novel SCADA system for laboratory testing
838
Development of a novel scintillation-trigger detector for the MTV experiment using aluminum-metallized film tapes
839
Development of a novel scintillation-trigger detector for the MTV experiment using aluminum-metallized film tapes
840
Development of a Novel Scoring System for Comprehensive COVID-19 Patient Evaluation: An Evidence-Based Systematic Review
841
Development of a novel severe plastic deformation method for tubular materials: Tube Channel Pressing (TCP)
842
Development of a novel simulated diesel particulate matter generator system
843
Development of a novel slurry condensation method by applying dispersant instead of flocculant
844
Development of a novel solid-phase extraction element for thermal desorption gas chromatography analysis
845
Development of a novel solids feed system for high pressure gasification
846
Development of a novel sports medicine rotation for emergency medicine residents
847
Development of a novel starch-derived porous silica monolith for enhancing the dissolution rate of poorly water soluble drug
848
Development of a novel statistical model for mandibular kinematics
849
Development of a novel strategy for preconcentration of antibiotic residues in milk and their quantitation by capillary electrophoresis
850
Development of a Novel Super-active Ziegler-Natta Polyethylene Catalyst: Study on Structure, Performance and Application
851
Development of a novel supercritical fluid extraction procedure for lanolin extraction from raw wool Original Research Article
852
Development of a novel synergistic thermosensitive gel for vaginal candidiasis: An in vitro, in vivo evaluation
853
Development of a novel synthetic loaded separator paper for VRLA batteries
854
Development of a novel system for assessing tooth and restoration wear
855
Development of a Novel Temporary Epicardial Pacing Wire With Biodegradable Film
856
Development of a novel terbium(III) chelate-based luminescent probe for highly sensitive time-resolved luminescence detection of hydroxyl radical
857
Development of a novel therapeutic suppressor of brain proinflammatory cytokine up-regulation that attenuates synaptic dysfunction and behavioral deficits
858
Development of a Novel Three-Dimensional Biocompatible Nanofibrous Scaffold for the Expansion and Hepatogenic Differentiation of Human Bone Marrow Mesenchymal Stem Cells
859
Development of a novel three-stage fermentation system converting food waste to hydrogen and methane
860
Development of a novel tool for semiconductor process control
861
Development of a novel two-stage liquid desiccant dehumidification system assisted by CaCl2 solution using exergy analysis method
862
Development of a novel type of composite cathode material for proton-conducting solid oxide fuel cells
863
Development of a novel ultrasound monitoring system for container filling operations
864
Development of a novel ultrasound-assisted headspace liquid-phase microextraction and its application to the analysis of chlorophenols in real aqueous samples
865
Development of a novel ultrasound-assisted surfactant-enhanced emulsification microextraction method and its application to the analysis of eleven polycyclic aromatic hydrocarbons at trace levels in water
866
DEVELOPMENT OF A NOVEL UWB VIVALDI ANTENNA ARRAY USING SIW TECHNOLOGY
867
Development of a novel vibration-based fatigue testing methodology
868
Development of a Novel Whey Beverage by Fermentation with Kefir Granules. Effect of Various Treatments
869
Development of a Novel Wind Turbine Simulator for Wind Energy Conversion Systems Using an Inverter-Controlled Induction Motor
870
Development of a novel, FTIR (Fourier transform infrared spectroscopy) based, yeast bioassay for toxicity testing and stress response study Original Research Article
871
Development of a novel-synthesized Ca-based CO2 sorbent for multicycle operation: Parametric study of sorption
872
Development of a nuclear-thermal coupled calculation code system
873
Development of a nucleation inhibitive coated mold for the rapid solidification of superalloy melt
874
Development of a numeric health care worker risk-assessment scale to evaluate potential for blood-borne pathogen exposures
875
Development of a numerical analysis methodology for the multi-dimensional and multi-phase phenomena of a sodium–water reaction in an SFR steam generator
876
Development of a numerical comparator for protective relaying. I
877
Development of a numerical comparator for protective relaying: Part II
878
Development of a numerical hydraulic model of the Los Azufres steam pipeline network
879
Development of a Numerical Index to Assess the Quality of Websites Design
880
Development of a numerical model for bridge–vehicle interaction and human response to traffic-induced vibration
881
Development of a numerical model for cake layer formation on a membrane Original Research Article
882
Development of a numerical model for natural gas steam reforming and coupling with a furnace model
883
Development of a numerical model for the damage identification on composite plate structures
884
Development of a numerical model for the evaluation of the urban thermal environment
885
Development of a numerical model for the evaluation of the urban thermal environment
886
Development of a numerical model for the fluid dynamic simulation of an ascending flow ripening chamber Original Research Article
887
Development of a numerical model for the simulation of vertical U-tube ground heat exchangers
888
Development of a numerical model to predict heat exchange rates for a ground-source heat pump system
889
Development of a numerical model to simulate the biological inactivation of airborne microorganisms in the presence of ultraviolet light
890
Development of a numerical simulation model for long-range migration of rice planthoppers
891
Development of a numerical simulation system toward comprehensive assessments of urban warming countermeasures including their impacts upon the urban buildingsʹ energy-demands
892
Development of a nurse-led sedation service for paediatric magnetic resonance imaging
893
Development of a nurse-led tranexamic acid administration protocol for trauma patients in rural South Africa
894
Development of a nursing practice based competency model for the Flemish master of nursing and obstetrics degree
895
Development of a nutrient database and distributions for use in a probabilistic risk–benefit analysis of human seafood consumption
896
Development of a nutrient database and distributions for use in a probabilistic risk–benefit analysis of human seafood consumption
897
Development of a nutritional screening or assessment tool using a multivariate technique
898
Development of a nutritional strategy for increasing lamb survival in Merino ewes mated in late spring/early summer
899
Development of a one point quadrature shell element for nonlinear applications with contact and anisotropy Original Research Article
900
Development of a One Step Strip Test for the Detection of (Dihydro)streptomycin Residues in Raw Milk
901
Development of a one-dimensional microstrip germanium detector for Compton scattering experiment at SPring-8
902
Development of a one-dimensional microstrip germanium detector for Compton scattering experiment at SPring-8
903
Development of a one-parameter variable source area runoff model for ungauged basins
904
Development of a one-pot method for the homologation of aldehydes to carboxylic acids
905
Development of a one-pot sequential Sonogashira coupling for the synthesis of benzofurans
906
Development of a one-step immunochromatographic strip test for the rapid detection of nevirapine (NVP), a commonly used antiretroviral drug for the treatment of HIV/AIDS
907
Development of a one-step integrated pressurized liquid extraction and cleanup method for determining polycyclic aromatic hydrocarbons in marine sediments
908
Development of a one-step microwave-assisted extraction method for simultaneous determination of organophosphorus pesticides and fungicides in soils by gas chromatography–mass spectrometry
909
Development of a one-step test strip for rapid screening of fumonisins B1, B2 and B3 in maize
910
Development of a package model for process simulation and cost estimation of seawater reverse osmosis desalination plant Original Research Article
911
Development of a packed bed regenerative solution heat exchanger (R-SHX) for a single stage LiBr–H2O vapour absorption refrigeration (VAR) system
912
DEVELOPMENT OF A PACKED PRECOLUMN FOR CAPILLARY GAS CHROMATOGRAPHIC ANALYSIS OF AMINES IN ACIDIC AQUEOUS SOLUTION
913
DEVELOPMENT OF A PACKED PRECOLUMN FOR CAPILLARY GAS CHROMATOGRAPHIC ANALYSIS OF AMINES IN ACIDIC AQUEOUS SOLUTION
914
Development of a padless ultraprecision polishing method using electrorheological fluid
915
Development of a pain assessment tool for the older adults in Korea: The validity and reliability of a Korean version of the geriatric pain measure (GPM-K)
916
Development of a pair of differential H/D isotope-coded derivatization reagents d0/d3-4-(1-methyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenlamine and its application for determination of aldehydes in selected aquatic products by liquid chromatography–tandem
917
Development of a pair potential for Fe–He by lattice inversion
918
Development of a palladium catalyzed addition of boronic acids to alkynyl esters: synthesis of trisubstituted olefins as single isomers
919
Development of a palladium-catalyzed decarboxylative cross-coupling of (2-azaaryl)carboxylates with aryl halides
920
Development of a Papua New Guinean onshore carbonate reservoir: A comparative borehole image (FMI) and petrographic evaluation
921
Development of a paradigm for measuring somatic disturbance in clinical populations with medically unexplained symptoms
922
Development of a parallel demodulation system used for extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors
923
Development of a parallel direct simulation code to investigate reactive flows
924
Development of a parallel implicit solver of fluid modeling equations for gas discharges Original Research Article
925
Development of a parallel plate proportional counter TRD with suppressed sensitivity to ionization
926
Development of a parallel Poissonʹs equation solver with adaptive mesh refinement and its application in field emission prediction Original Research Article
927
Development of a parallel semi-implicit two-dimensional plasma fluid modeling code using finite-volume method Original Research Article
928
Development of a parallel storm surge model
929
Development of a parallelized 3D electrostatic PIC-FEM code and its applications Original Research Article
930
Development of a parametric model and virtual machine to estimate task specific measurement uncertainty for a five-axis multi-sensor coordinate measuring machine
931
Development of a parathion sensor based on molecularly imprinted nano-TiO2 self-assembled film electrode
932
Development of a participatory monitoring and evaluation strategy
933
Development of a participatory tool for the evaluation of Village Animal Health Workers in Cambodia
934
Development of a particle deposition meter
935
Development of a particle size distribution measurement method at high temperature by use of classification during sampling
936
Development of a particulate emulsifier by mechanochemical treatment and application to the liquid-liquid extraction process
937
Development of a passive doas system to retrieve atmospheric pollution columns in the 200 to 355 nm region
938
Development of a passive sampler for gaseous mercury
939
Development of a passive sampling technique for the determination of nitrogen dioxide and sulphur dioxide in ambient air
940
Development of a patent document classification and search platform using a back-propagation network
941
Development of a Patent Retrieval and Analysis Platform – A hybrid approach
942
Development of a pathogen transport model for Irish catchments using SWAT
943
Development of a Pathotype Specific SCAR Marker in Plasmodiophora brassicae
944
Development of a patient-based questionnaire about emotional and social issues related to eating with dentures
945
Development of a patient-based questionnaire about emotional and social issues related to eating with dentures
946
Development of a patient-reported outcome questionnaire for use in adults with moderate-to-severe plaque psoriasis: The Psoriasis Symptoms and Signs Diary
947
Development of a Patient-Specific Finite Element Model for Predicting Implant Failure in Pelvic Ring Fracture Fixation
948
Development of a patient-specific simulation tool to analyse aortic dissections: Assessment of mixed patient-specific flow and pressure boundary conditions
949
Development of a Pavement Overall Deterioration Index (Case Study: Iran)
950
Development of a PC interface board for true color control using an Ar–Kr white-light laser
951
Development of a PC-based Open Architecture Software-CNC System
952
Development of a PCL/gelatin/chitosan/β-TCP electrospun composite for guided bone regeneration
953
Development of a PCR assay for the detection of nifH and nifD genes in indigenous photosynthetic bacteria
954
Development of a PCR Assay for the Molecular Detection of Phytophthora boehmeriae in Infected Cotton
955
Development of a PCR assay for the strain-specific identification of probiotic strain Lactobacillus paracasei IMPC2.1
956
Development of a PCR assay to detect mycoplasma contamination in cord blood hematopoietic stem cells
957
Development of a PCR protocol to detect ochratoxin A producing moulds in food products
958
Development of a PCR protocol to detect patulin producing moulds in food products
959
Development of a PCR test to detect the downy mildew causal agent Plasmopara halstedii in sunflower seeds
960
Development of a PCR-based Assay for the Detection of Plasmodiophora brassicae in Soil
961
Development of a PCR-based assay to detect Shiga toxin-producing Escherichia coli, Listeria monocytogenes, and Salmonella in milk Original Research Article
962
Development of a PCR-based diagnostic test for Spongospora subterranea f.sp. nasturtii, the causal agent of crook root of watercress (Rorippa nasturtium-aquaticum)
963
Development of a PCR-based marker for studying allelic variation of Hd3a in rice and its effect on flowering time
964
Development of a PCR-compatible enrichment medium for Yersinia enterocolitica: amplification precision and dynamic detection range during cultivation
965
Development of a PCR-culture technique for rapid detection of yeast species in vacuum packed ham
966
Development of a PDMS-grafted alumina membrane and its evaluation as solvent resistant nanofiltration membrane
967
Development of a pedestrian bridge with GFRP profiles and fiber reinforced self-compacting concrete deck
968
Development of a peer-to-peer information sharing system using ontologies
969
Development of a PEFC under low humidified conditions
970
DEVELOPMENT OF A PELLET SCALE MODEL FOR TRICKLE BED REACTOR USING CFD TECHNIQUES
971
Development of a PEM fuel cell powered portable field generator for the dismounted soldier
972
Development of a PEM stack and performance analysis including the effects of water content in the membrane and cooling method
973
Development of a penetration test for timber impregnation products for use in old buildings
974
Development of a Penning trap system in Munich
975
Development of a pentaplex PCR assay for the simultaneous detection of Streptococcus thermophilus, Lactobacillus delbrueckii subsp. bulgaricus, L. delbrueckii subsp. lactis, L. helveticus, L. fermentum in whey starter for Grana Padano cheese
976
Development of a pepper pot emittance probe and its application for ECR ion beam studies
977
Development of a pepper pot emittance probe and its application for ECR ion beam studies
978
Development of a Peptide Antibody Specific to Human Glutathione S-Transferase Alpha 4-4 (hGSTA4-4) Reveals Preferential Localization in Human Liver Mitochondria
979
Development of a peptide inhibitor-based cantilever sensor assay for cyclic adenosine monophosphate-dependent protein kinase Original Research Article
980
Development of a peptide mapping procedure to identify and quantify methionine oxidation in recombinant human α1-antitrypsin
981
Development of a Perception Scale on the Use of Webquests
982
Development of a performance test method for PEFC stack
983
Development of a perfusion ion-exchange chromatography method for the separation of soybean proteins and its application to cultivar characterization
984
Development of a perfusion reversed-phase high performance liquid chromatography method for the characterisation of maize products using multivariate analysis
985
Development of a Permanent Device for Fertility Period Detection by Basal Body Temperature and Analysis of the Cervical Mucus Potential of Hydrogen
986
Development of a permeability apparatus for concrete and mortar
987
Development of a Persian Mobile Sales Chatbot based on LLMs and Transformer
988
Development of a personal dosimetry system based on optically stimulated luminescence of α-Al2O3 : C for mixed radiation fields
989
Development of a perturbative approach for Monte Carlo simulations using a hybrid ab initio QM/MM method
990
Development of a PET detector module with Depth of Interaction capability
991
Development of a PET detector module with Depth of Interaction capability
992
Development of a PFM code for evaluating reliability of pressure components subject to transient loading
993
Development of a PFM code for evaluating reliability of pressure components subject to transient loading Original Research Article
994
Development of a Pharmacokinetic/Pharmacodynamic Model for Carvedilol to Predict β1-Blockade in Patients with Congestive Heart Failure
995
Development of a phase counter with real-time fringe jump corrector for heterodyne interferometer on LHD
996
Development of a Phase-Change Model for the Volume-of-Fluid Method in OpenFOAM
997
Development of a phenomenological scaling law for fractal aggregate sintering from molecular dynamics simulation
998
Development of a phenyl membrane chromatography-based process yielding pharmaceutical grade plasmid deoxyribonucleic acid for mammalian cells transfection
999
Development of a Phosphatase-Stable Phosphotyrosyl Mimetic Suitably Protected for the Synthesis of High-Affinity Grb2 SH2 Domain-Binding Ligands
1000
Development of a photobioreactor incorporating Chlorella sp. for removal of CO2 in stack gas
