<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Development of fabrication process for Ag/polydiacetylene (core/shell) hybridized nanocrystals
2
Development of fabrication technologies for advanced breeding functional materials For DEMO reactors
3
Development of fabrication technologies for advanced tritium breeder pebbles by the sol–gel method
4
Development of fabrication technologies for the ITER divertor
5
Development of fabrication technology and investigation of properties of steel-to-bronze joints suggested for ITER HHF components
6
Development of face recognition in an infant gibbon (Hylobates agilis)
7
Development of face recognition in infant chimpanzees (Pan troglodytes)
8
Development of facilitated transport membranes for the separation of olefins from gas streams Original Research Article
9
Development of FARICH-detector for ALICE experiment at CERN
10
Development of FARICH-detector for ALICE experiment at CERN
11
Development of far-infrared FEL with needle photo-RF-gun
12
Development of far-infrared FEL with needle photo-RF-gun
13
Development of Fast Dissolving Sublingual Wafers of Promethazine Hydrochloride
14
Development of fast enantioselective gas-chromatographic analysis using gas-chromatographic method-translation software in routine essential oil analysis (lavender essential oil)
15
Development of fast formation process for synthesizing submicron lead magnesium niobate perovskite powder
16
Development of fast Fourier transform continuous cyclic voltammetry at Au microelectrode in flowing solutions as a novel method for sub-nanomolar monitoring of lidocaine in injection and biological fluids Original Research Article
17
Development of fast Fourier transformations with continuous cyclic voltammetry at an Au microelectrode and its application for the sub nano-molar monitoring of methyl morphine trace amounts
18
Development of fast high-resolution muon drift-tube detectors for high counting rates
19
Development of fast high-resolution muon drift-tube detectors for high counting rates
20
Development of fast neutron profiling method
21
Development of fast neutron profiling method
22
Development of fast one-dimensional X-ray detector for imaging of explosions
23
Development of fast one-dimensional X-ray detector for imaging of explosions
24
Development of fast thermal programs in electrothermal atomic absorption spectrometry using hot injection and removal of the ashing stage for determination of heavy metals in sequential extracts from sediments
25
Development of fast thermal programs in electrothermal atomic absorption spectrometry using hot injection and removal of the ashing stage for determination of heavy metals in sequential extracts from sediments Original Research Article
26
Development of Fat Emulsions
27
Development of fatigue crack growth in real structures
28
DEVELOPMENT OF FATIGUE CRACKING IN AIRCRAFT ENGINE COMPRESSOR DISKS OF TITANIUM ALLOY Ti–6Al–3Mo–2Cr
29
Development of Fatigue Failure Criterion for Hot-Mix Asphalt Based on Dissipated Energy and Stiffness Ratio
30
Development of fatigue lifetime predictive test methods for hip implants: Part I. Test methodology
31
Development of Fatigue Monitoring System for a Hydraulic Excavator
32
Development of fatigue symptoms during simulated driving
33
Development of fatty acid analysis by high-performance liquid chromatography, gas chromatography, and related techniques Review Article
34
Development of FBR measurement of char reactivity to carbon dioxide at elevated temperatures
35
Development of FBR piping bellows joints in Japan Original Research Article
36
Development of fcc-Al nanocrystals in Al–Ni–Gd metallic glasses during continuous heating DSC scan
37
Development of fcc-Al nanoparticles during crystallization of amorphous Al–Ni alloys containing mischmetal: Microstructure and hardness evaluation
38
Development of FCM method to increase clustering accuracy in big data
39
Development of FDA-Approved Antibacterial Metal and Metal Oxide Nanoparticles: An Update
40
Development of Fe2O3–TiO2 mixed oxide incorporated Ni–P coating for electrocatalytic hydrogen evolution reaction
41
Development of Fe3C, SiC and Al4C3 compounds during mechanical alloying
42
Development of feasibility approaches for studying the behavior of passive cooling systems in buildings
43
Development of federal programs and support infrastructure enterprises
44
Development of feed package for layers using low energy agro-industrial by products
45
Development of femoral atherosclerosis in relation to flow disturbances
46
Development of femtosecond photocathode RF gun
47
Development of femtosecond photocathode RF gun
48
Development of Fe–Ni/YSZ–GDC electrocatalysts for application as SOFC anodes: XRD and TPR characterization and evaluation in the ethanol steam reforming reaction
49
Development of fermented instant Chinese noodle using Lactobacillus plantarum Original Research Article
50
Development of Fertilizer Recommendation for Aquatic Taro (Colocasia esculenta) in Grey Terrace Soil
51
Development of fertilizer recommendation for cabbage production in Low Ganges River Floodplain of Bangladesh
52
Development of FET-type CO2 sensor operative at room temperature
53
Development of FFAG accelerators and their applications for intense secondary particle production
54
Development of FFAG accelerators and their applications for intense secondary particle production
55
Development of Fiber Bragg Grating (FBG) as Temperature Sensor Inside Packed-bed Non-thermal Plasma Reactor
56
Development of fiber Bragg grating sensors for monitoring civil infrastructure
57
Development of fiber optic hydrogen sensors for testing nuclear waste repositories
58
Development of Fiber Reinforced SCM for Sustainable Construction
59
Development of fiber-to-fiber connectors for scintillating tile/fiber calorimeters
60
Development of fibre metal laminates for advanced aerospace structures
61
Development of Fibre Metal Laminates: concurrent multi-scale modeling and testing
62
Development of fibre-based soil–cement block with low thermal conductivity
63
Development of fibrinous thrombus analogue for in-vitro abdominal aortic aneurysm studies
64
Development of fibrous preforms for FRP pipe connections
65
Development of field programmable modular wireless sensor network nodes for ambient systems
66
Development of field technique for mass screening of chickpea (Cicer arietinum L.) germ plasm under drought prone environments
67
Development of field-deployable QCL sensor for simultaneous detection of ambient N2O and CO
68
Development of filler wires for welding of reduced activation ferritic martenstic steel for Indiaʹs test blanket module of ITER
69
Development of film sensors based on ZnO nanoparticles for amine gas detection
70
Development of films based on blends of Amaranthus cruentus flour and poly(vinyl alcohol)
71
Development of films based on blends of Amaranthus cruentus flour and poly(vinyl alcohol)
72
Development of films based on blends of gelatin and poly(vinyl alcohol) cross linked with glutaraldehyde
73
Development of films based on quinoa (Chenopodium quinoa, Willdenow) starch
74
Development of film-shaped thermoelectric materials for thermoelectric modules
75
Development of filtered Euler–Euler two-phase model for circulating fluidised bed: High resolution simulation, formulation and a priori analyses
76
Development of financial intermediation and economic growth: The Chinese experience
77
Development of fine-grain size titanium 6Al–4V alloy sheet material for low temperature superplastic forming
78
Development of fine-grained structure and the mechanical properties of nickel-based Superalloy 718
79
Development of fine-grained V–28Cr–2.3Y and V–52Cr–1.8Y alloys with superior mechanical properties
80
Development of finite difference schemes near an inflow boundary
81
Development of fireclay aluminosilicate refractory from lithomargic clay deposits
82
Development of fireside waterwall corrosion correlations using pilot-scale test furnace
83
Development of first photoresponsive prodrug of paclitaxel
84
Development of first wall/blanket structure by hot isostatic pressing (HIP) in the JAERI
85
Development of first-stage co-liquefaction of Chinese coal with waste plastics
86
Development of fish gelatin edible films using extrusion and compression molding Original Research Article
87
Development of fish mercury concentrations in Finnish reservoirs from 1979 to 1994
88
Development of fission micro-chambers for nuclear waste incineration studies
89
Development of fission micro-chambers for nuclear waste incineration studies
90
Development of fixed-abrasive tool with spiral groove for decreasing the loading
91
Development of Fixture Devices for Thin and Compliant Workpieces
92
Development of flat plate collector with plastic transparent insulation and low-cost overheating protection system
93
Development of flat plate rechargeable alkaline manganese dioxide–zinc cells
94
Development of flat-sheet membranes for C1–C4 alcohols dehydration via pervaporation from sulfonated polyphenylsulfone (sPPSU)
95
Development of flaw evaluation guideline for FBR components Original Research Article
96
Development of flax/carbon fibre hybrid composites for enhanced properties
97
Development of flexible arrays for in vivo neuronal recording and stimulation
98
Development of flexible arrays for in vivo neuronal recording and stimulation
99
Development of flexible organo-saponite films and their transparency at high temperature
100
DEVELOPMENT OF FLEXIBLE PAVEMENT DESIGN TOOL BASED ON JABATAN KERJA RAYA (JKR)’S REVISED GUIDELINE
101
Development of flexural capacity of a FRP prestressed beam with vertically distributed tendons
102
Development of Floating Tablets of Metformin HCl by Thermoplastic Granulation. Part II: In Vitro Evaluation of the Combined Effect of Acacia Gum/HPMC on Biopharmaceutical Performances
103
Development of Floating-Mucoadhesive Microsphere for Site Specific Release of Metronidazole
104
Development of floral organ identity: stories from the MADS house
105
Development of Flow Cytometry-Fluorescent In Situ Hybridization (Flow-FISH) Method for Detection of PML/RARa Chromosomal Translocation in Acute Promyelocytic Leukemia Cell Line
106
Development of flow field design of polymer electrolyte membrane fuel cell using in-situ impedance spectroscopy
107
Development of flow injection potentiometric methods for the off-line and on-line determination of fluoride to monitor the biodegradation of a monofluorophenol in two bioreactors
108
Development of flow injection spectrophotometric methods for the determination of free available chlorine and total available chlorine: comparative study Original Research Article
109
Development of flow-induced vibration evaluation methodology for large-diameter piping with elbow in Japan sodium-cooled fast reactor
110
Development of Fluency, Accuracy, and Complexity in Productive Skills of EFL learners across Gender and Proficiency: A Chaos Complexity Approach
111
Development of fluidized bed combustion—An overview of trends, performance and cost
112
Development of fluidized bed gasifier with triple-beds and dual circulation
113
Development of fluidized bed reactors for silicon production
114
Development of Fluorescein-Labelled Antisera for Rapid Detection of Rabbit Haemorrhagic Disease Virus
115
Development of fluorescence imaging-based assay for screening cardioprotective compounds from medicinal plants Original Research Article
116
Development of fluorescence-emitting antibody labeling substance by near-infrared ray excitation
117
Development of fluorescent FeIII sensor based on chalcone
118
Development of fluorescent polymerization-based signal amplification for sensitive and non-enzymatic biodetection in antibody microarrays
119
Development of fluorinated low temperature glassy carbon films for solid-phase microextraction
120
Development of fluorinated, monolithic columns for improved chromatographic separations of fluorous-tagged analytes
121
Development of fluorination methods using continuous-flow microreactors
122
Development of fluorocarbon rubber for backup seals of sodium cooled fast breeder reactor
123
Development of fly ash based geopolymer precast concrete elements
124
Development of fly ash-based automotive brake lining
125
Development of flying type head/slider for optical recording technology
126
Development of FM steels diffusion bonding technologies for blanket manufacturing applications
127
Development of foamy virus vectors for the genetic correction of beta-thalassemia
128
Development of focal choroidal excavation in non-neovascular age related macular degeneration with pachy-choroid features
129
Development of focusing undulators on the basis of side magnet arrays
130
Development of food composition database management systems: the New Zealand experience
131
Development of food variety in children
132
Development of food-grade filled hydrogels for oral delivery of lipophilic active ingredients: pH-triggered release
133
Development of foraging behaviour in the Eurasian dipper, Cinclus cinclus, from fledging until dispersal
134
Development of forced flow cooled current leads for fusion magnets Original Research Article
135
Development of forging process design to close internal voids
136
Development of formaldehyde sensing element using porous glass impregnated with Schiffʹs reagent
137
Development of formaldehyde sensing element using porous glass impregnated with β-diketone
138
Development of formulations for meat pickle
139
Development of forward models for hand localization and movement control in 6- to 10-year-old children
140
Development of Forward-wave Directional Couplers Loaded by Periodic Shunt Shorted Stubs
141
Development of fouling communities on vertical structures in the Baltic Sea
142
Development of fouling control strategies pertinent to nanofiltration membranes Original Research Article
143
Development of fourier-reynolds correlations for cooling parameters
144
Development of Four-Node Membrane Element Containing Central Circular Hole
145
Development of FPGA based power flow monitoring system in a microgrid
146
Development of fractal geometry in a one-dimensional gravitational system
147
Development of fractal kinetic theory for enzyme-catalysed reactions and implications for the design of biochemical pathways
148
Development of fracture facets from a crack loaded in mode I+III: Solution and application of a model 2D problem
149
Development of Fracture Toughness Requirements for Weld Metals in Seismic Applications
150
Development of Fragility Curves for Brick Infill Walls in Steel Frames
151
Development of fragility curves of bridges retrofitted by column jacketing
152
Development of fragmentation models for solid fuel combustion and gasification as subroutines for inclusion in CFD codes
153
Development of framework for realization and classification of static and dynamic energy efficiency measures
154
Development of framework for sustainable Lean implementation: an ISM approach
155
Development of freeform fabrication method for Ti–Al–Ni intermetallics
156
Development of freezing–thawing processes of foundation soils surrounding the China–Russia Crude Oil Pipeline in the permafrost areas under a warming climate
157
Development of friction force model for mineral oil basestock containing palm olein and antiwear additive
158
Development of friendship network among young scientists in an international Summer School
159
Development of front end electronics for PHENIX RICH
160
Development of front end electronics for PHENIX RICH
161
Development of frontal electroencephalogram (EEG) and heart rate (ECG) responses to affective musical stimuli during the first 12 months of post-natal life
162
Development of front-end ASICs for imaging neuronal activity in live tissue
163
Development of front-end ASICs for imaging neuronal activity in live tissue
164
Development of front-end electronics and TDC LSI for the ATLAS MDT
165
Development of front-end electronics and TDC LSI for the ATLAS MDT
166
Development of front-end electronics for mini-strip RPC readout
167
Development of front-end electronics for mini-strip RPC readout
168
Development of front-end electronics for the luminosity detector at ILC
169
Development of front-end electronics for the luminosity detector at ILC
170
Development of FRP Short-Span Deployable Bridge-Experimental Results
171
DEVELOPMENT OF FRUIT SCIENCE IN LATVIA
172
Development of fruiting bodies of large tree type of Gremmeniella abietina var. abietina and timing of infection on Scots pine inn northern Finland
173
DEVELOPMENT OF FUEL ADDITIVES TO ENHANCE THE PERFORMANCES OF FOUR-CYLINDER SPARK-IGNITION ENGINE
174
Development of fuel cell bipolar plates from graphite filled wet-lay thermoplastic composite materials
175
Development of fuel-cell-powered electric bicycle
176
Development of fuel-model interfaces: Characterization of Pd containing UO2 thin films
177
Development of fuel-model interfaces: Investigations by XPS, TEM, SEM and AFM
178
Development of functional biointerfaces by surface modification of polydimethylsiloxane with bioactive chlorogenic acid
179
Development of functional bread containing nanoencapsulated omega-3 fatty acids Original Research Article
180
Development of functional dentin incisors after a partial resection of the odontogenic organ of rat incisors
181
Development of functional devices using hot spot in GdBa2Cu3O7−δ-based composite ceramics
182
Development of functional electrical stimulators utilizing cochlear implant technology
183
Development of functional mesoporous microparticles for controlled drug delivery
184
Development of Functional Sausages: A Comparative Study of the Impact of Four Dietary Fibers on the Physico-Chemical Properties of Mortadella Sausages
185
Development of functional sportswear for controlling moisture and odor prepared by atmospheric pressure nonthermal plasma graft polymerization induced by RF glow discharge
186
Development of functional surface by nano-plastic forming
187
Development of functionalized Fe–Al–Cr alloy fibers as innovative catalytic oxidation devices
188
Development of functionalized single walled carbon nanotubes based triacylglycerol acylhydrolases
189
Development of functionalized superparamagnetic iron oxide nanoparticles for interaction with human cancer cells
190
Development of functionalized terbium fluorescent nanoparticles for antibody labeling and time-resolved fluoroimmunoassay application
191
Development of functionalized zeolite membrane and its potential role as reactor combined separator for para-xylene production from xylene isomers
192
Development of functionalized zeolite membrane and its potential role as reactor combined separator for para-xylene production from xylene isomers
193
Development of Functionally Graded Materials by Ultrasonic Consolidation
194
Development of functionally graded plasma-facing materials
195
Development of functionally-graded cementitious panel against high-velocity small projectile impact
196
Development of fungal mycelia as skin substitutes: Effects on wound healing and fibroblast
197
Development of fungi below ground in association with plants growing in disturbed and undisturbed soils
198
Development of fungi below ground in association with plants growing in disturbed and undisturbed soils
199
DEVELOPMENT OF FUSARIUM EAR ROT DISEASE OF MAIZE IN THREE DIFFERENT GEOGRAPHIC LOCATIONS
200
Development of Fusarium Wilt-resistant Genotypes in Safflower (Carthamus tinctorius)
201
Development of fusion fuel cycle technology at the Tritium Laboratory Karlsruhe: the experiment CAPRICE
202
Development of fuzzy image and image control charts using α-cuts
203
Development of Fuzzy Logic Based Differentiation Algorithm and Fast Line-scan Imaging System for Chicken Inspection
204
Development of Fuzzy Logic Controller for Packed Bed Reactor
205
Development of Fuzzy Multi Criteria Decision by Generalized Trapezoidal Pair-Wise Comparison Matrices
206
Development of fuzzy process accuracy index for decision making problems
207
Development of fuzzy process control charts and fuzzy unnatural pattern analyses
208
Development of fuzzy process control charts and fuzzy unnatural pattern analyses
209
Development of fuzzy state controller and its application to a hydraulic position servo
210
Development of Ga-67 Maltolate Complex as an Imaging Agent
211
Development of GaAs-CCDs for X-ray detection
212
Development of GaAs-CCDs for X-ray detection
213
Development of GAGG depth-of-interaction (DOI) block detectors based on pulse shape analysis
214
Development of GAGG depth-of-interaction (DOI) block detectors based on pulse shape analysis
215
Development of gallium incorporated mesoporous silica catalysts for the selective removal of BTX Original Research Article
216
Development of gallium-nitride-based light-emitting diodes (LEDs) and laser diodes for energy-efficient lighting and displays Original Research Article
217
Development of galloping endurance design for extra large 6-conductor bundle spacers by the experience of the full scale 500 kV test line
218
Development of gamma-ray emitting test sources for portal monitors
219
Development of GaN photocathodes for UV detectors
220
Development of GaN photocathodes for UV detectors
221
Development of ganglioneuroma following successful treatment for orbital rhabdomyosarcoma
222
Development of gap junctional channels and intercellular communication in rat liver during ontogenesis
223
Development of gas avalanche photodetector operating at cryogenic temperature
224
Development of gas avalanche photodetector operating at cryogenic temperature
225
Development of Gas Chromatographic Method with ElectronCapture Detector for Determination of Some PCDDs inWheat and Rice Grain Matrix
226
Development of gas chromatography–mass spectrometry following headspace single-drop microextraction and simultaneous derivatization for fast determination of short-chain aliphatic amines in water samples
227
Development of gas chromatography–mass spectrometry following headspace single-drop microextraction and simultaneous derivatization for fast determination of the diabetes biomarker, acetone in human blood samples Original Research Article
228
Development of gas chromatography–mass spectrometry following microwave distillation and simultaneous headspace single-drop microextraction for fast determination of volatile fraction in Chinese herb
229
Development of gas cooled reactors and experimental setup of high temperature helium loop for in-pile operation
230
Development of gas diffusion electrodes for low relative humidity proton exchange membrane fuel cells
231
Development of gas electron multiplier foils with a laser etching technique
232
Development of gas electron multiplier foils with a laser etching technique
233
Development of gas entrainment mitigation devices for PFBR hot pool
234
Development of gas phase bioreactors for the removal of nitrogen oxides from synthetic flue gas streams
235
Development of gas sensors coatings by polyaniline using pressurized fluid
236
Development of gaseous PMT with micropattern gas detector
237
Development of gaseous PMT with micropattern gas detector
238
Development of gaseous tracking devices for the search of WIMPs
239
Development of gaseous tracking devices for the search of WIMPs
240
Development of gas-separation membrane-assisted lead-acid battery
241
Development of gas–solid direct contact heat exchanger by use of axial flow cyclone
242
Development of Gastric Cancer and Its Prevention
243
Development of gastric emptying in premature infants: Use of the 13C-octanoic acid breath test
244
Development of Gastroenterology and Hepatology in Iran: Part II-Advances in Research and Therapeutic Modalities
245
Development of Gastroenterology and Hepatology in Iran: Part I-Training Programs and the Iranian Association of Gastroenterology and Hepatology
246
Development of gating membranes that are sensitive to the concentration of ethanol
247
Development of GC–MS/MS method with programmable temperature vaporization large volume injection for monitoring of 17β-estradiol and 2-methoxyestradiol in plasma Original Research Article
248
Development of Ge/NbSi detectors for EDELWEISS-II with identification of near-surface events
249
Development of Ge/NbSi detectors for EDELWEISS-II with identification of near-surface events
250
Development of Gel Structured Electrorheological Fluids and their Application for the Precision Clamping Mechanism of Aerostatic Sliders
251
Development of gelatin nanoparticles with biotinylated EGF conjugation for lung cancer targeting
252
Development of gelling properties of inulin by microfluidization
253
Development of GEM tracking detector for intermediate-energy nuclear experiments
254
Development of GEM tracking detector for intermediate-energy nuclear experiments
255
Development of Gender-Specific Equations for Estimating Body Weight and Height Based on Anthropometric Measurements in Adults from Shiraz, Iran
256
Development of generalized (rate dependent) availability
257
Development of Generalized Feed Forward Network for Predicting Annual Flood (Depth) of a Tropical River
258
Development of general-purpose software to analyze the steady state of power generation systems
259
Development of generic creep–fatigue life prediction models
260
Development of generic soil profiles and soil data development for SSI analyses
261
Development of genetic algorithm-based optimization module in WHAT system for hydrograph analysis and model application
262
Development of Genetic Circuitry Exhibiting Toggle Switch or Oscillatory Behavior in Escherichia coli
263
Development of genetic fuzzy logic controllers for complex production systems
264
Development of Genome-Wide DNA Polymorphism Database for Map-Based Cloning of Rice Genes
265
Development of Genre-Based Student Worksheet for Vocational School Students
266
Development of Geometallurgical Indices for Semi-Autogenous Grinding at Sarcheshmeh Porphyry Copper Mine
267
Development of geometrically exact new shell elements based on general curvilinear co-ordinates
268
Development of geotechnical microzonation model for Yenisehir (Bursa, Turkey) located at a seismically active region
269
Development of geothermal energy utilization in Turkey: a review
270
Development of GEQUAC as a new group contribution method for strongly non-ideal mixtures
271
Development of germanium gallium sulphide glass fibres for the 1.31 μm praseodymium-doped fibre amplifier
272
Development of giant drops and high-reflectivity cores in Hawaiian clouds: numerical simulations using a kinematic model with detailed microphysics
273
Development of ginger based ready-to-eat appetizers by response surface methodology
274
Development of GIS- and GPS-Based Intelligent Network-Level Road Maintenance and Rehabilitation System
275
Development of GIS fault location system using pressure wave sensors
276
Development of glacial-valley cross sections under conditions of spatially variable resistance to erosion
277
Development of Glass Ceramics Made From Ferrous Tailings and Slag in China Original Research Article
278
Development of Glass Fiber Reinforced Polymer Composite Bridge Deck
279
Development of Glass Fiber Reinforced Polymer Composite Bridge Deck
280
Development of glass fiber, wollastonite reinforced polypropylene hybrid composite: Mechanical properties and morphology
281
Development of glass resistive plate chambers for INO experiment
282
Development of glass resistive plate chambers for INO experiment
283
Development of glass–ceramic scaffolds for bone tissue engineering: Characterisation, proliferation of human osteoblasts and nodule formation
284
Development of glass-ceramics by sintering and crystallization of fine powders of calcium-magnesium-aluminosilicate glass
285
Development of glass-ceramics from boron containing waste and meat bone ash combinations with addition of waste glass
286
Development of glasses for the vitrification of high level liquid waste (HLLW) in a joule heated ceramic melter
287
Development of glass-ionomer cement systems
288
Development of Global Consensus Sequence and Analysis of Highly Conserved Domains of the HCV NS5B Protein
289
Development of Global Identity in the Social Studies Classroom
290
Development of global scale multimedia contaminant fate model: Incorporating paddy field compartment
291
Development of glucose amperometric biosensor based on a novel attractive enzyme immobilization matrix: Amino derivative of thiacalix[4]arene Original Research Article
292
Development of glucosidase agar for the confirmation of water-borne Enterococcus
293
Development of glue-type potentials for the Al–Pb system: phase diagram calculation Original Research Article
294
Development of Glutathione Synthesis and γ-Glutamyltranspeptidase Activities in Tissues from Newborn Infants
295
Development of Gluten Extensibility Measurement Using Tensile Test
296
Development of Gluten Free Bulgur-like Product from Lentil (Lens culinaris) and Investigation of Its Physical-Functional Properties
297
Development of gluten-free bread using tartary buckwheat and chia flour rich in flavonoids and omega-3 fatty acids as ingredients
298
Development of gluten-free flat bread using hydrocolloids: Xanthan and CMC
299
Development of glycerol/O2 biofuel cell
300
Development of glycerol-utilizing Escherichia coli strain for the production of bioethanol
301
Development of goat pâté prepared with ‘variety meat
302
Development of gold induced surface plasmon enhanced CIGS absorption layer on polyimide substrate
303
Development of Gold Modified Disposable Pencil Graphite Electrode for the Electrochemical Investigation of Acetaminophen Present in Pharmaceutical formulations and Biological samples
304
Development of gold nanoparticles-lateral flow test as a novel field diagnostic assay for detecting foot-and-mouth disease and lumpy skin disease viruses
305
Development of goldfish macrophages in vitro
306
Development of gold–silica composite nanoparticle substrates for perchlorate detection by surface-enhanced Raman spectroscopy Original Research Article
307
Development of good modelling practice for physiologically based pharmacokinetic models for use in risk assessment: The first steps
308
Development of gradient elution retention model in ion chromatography by using radial basis function artificial neural networks
309
Development of gradient thermal barrier coatings and their hot-fatigue behavior
310
Development of Graft union Formation and Histological Observations in Cactus Influenced by Benzyladenine, Grafting Method and Rootstock
311
Development of grain structure during friction stir welding of pure titanium Original Research Article
312
Development of grain threshers based on ergonomic design criteria
313
DEVELOPMENT OF GRAPHIC SYMBOLS BASED ON TROPICAL PLANT IMAGES IN DECORATIVE TILES PRODUCTION
314
Development of Graphical Analytical Models for Digital Signal Processing System Structures
315
Development of graphite structure with heat treatment in a carbon sheet derived from cellulose nanofibrils of plant origin
316
Development of graphite-poly(tetrafluoroethylene) composite electrodes Voltammetric determination of the herbicides thiram and disulfiram
317
Development of Great Lakes shoreline management plans by Ontario conservation authorities
318
Development of green campus in China
319
Development of green engineered cementitious composites using iron ore tailings as aggregates
320
Development of Green Method for Trace Determination of Bendiocarb in Real Samples Using Emerson Reaction
321
Development of Green Product Processes in Textile Industry Using Mathematical Modeling and NSGA-II Metaheuristic Algorithm: A Case Study in Oyaz Industrial Group
322
Development of green ultra-high performance fiber reinforced concrete containing ultrafine palm oil fuel ash
323
Development of Greenhouse Inoculation Procedures for Evaluation of Partial Resistance to Cercospora zeae-maydis in Maize Inbreds
324
Development of grid connection requirements for wind power generators in India
325
Development of group II borohydrides as hydrogen storage materials
326
Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel
327
Development of grouts for consolidation of old renders
328
Development of Growth Media for Bacillus amyloliquefaciens subsp. plantarum, a Poultry Probiotic Candidate
329
Development of Guidance and Counseling Service Modules in the Social Field based on WASAKA Values to Increase Students Social Responsibility Awareness at SMA Negeri 6 Banjarmasin
330
Development of guided bone regeneration membrane composed of β-tricalcium phosphate and poly ( -lactide-co-glycolide-co- -caprolactone) composites
331
development of guided inquiry-based accounting learning module to improve students’ learning outcomes in state vocational high school 1 karanganyar
332
Development of guidelines for ammonia in estuarine and marine water systems
333
Development of guidelines for improving the effectiveness of environmental assessment
334
Development of guidelines on best practices for the slaughter of animals in Cyprus
335
Development of guidelines on pathology laboratory practice
336
Development of gullies and sediment fans in last-glacial areas on the example of the Suwałki Lakeland (NE Poland)
337
Development of gullies and sediment production in the black soil region of northeastern China
338
Development of gut endocrine cells
339
Development of gut-homing receptors on circulating B cells during infancy
340
Development of gyrotrons with 2 MW output power
341
Development of habitat models for Nephtys species (Polychaeta: Nephtyidae) in the German Bight (North Sea)
342
Development of HACCP Procedure for the Production of Full Fat Soy Flour
343
Development of hafnium based high-k materials—A review
344
Development of half-cells with sulfonated Pt/Vulcan catalyst for PEM fuel cells
345
Development of half-titanocene catalysts for synthesis of cyclic olefin copolymers
346
Development of HAM tool for building envelope analysis
347
Development of handedness: Comparison of questionnaire and performance-based measures of preference
348
Development of handheld SAW vapor sensors for explosives and CW agents
349
Development of Haraz Road geotourism as a key to increasing tourism industry and promoting geoconservation
350
Development of hard intermetallic coatings on austenitic stainless steel by hot dipping in an Al–Si alloy
351
Development of hard water sensor using fluorescence resonance energy transfer
352
Development of hard X-ray photoelectron spectroscopy at BL29XU in SPring-8
353
Development of hard X-ray photoelectron spectroscopy at BL29XU in SPring-8
354
Development of hard X-ray polarimeter for γ-ray bursts Original Research Article
355
Development of hard/soft ferrite nanocomposite for enhanced microwave absorption
356
Development of hardness homogeneity and superplastic behavior in an aluminum–copper eutectic alloy processed by high-pressure torsion
357
DEVELOPMENT OF HARDNESS IN A Fe- BASED NANO-COMPOSITE ALLOY
358
Development of hardware system using temperature and vibration maintenance models integration concepts for conventional machines monitoring: a case study
359
Development of harvester ant colonies alters soil chemistry
360
Development of harvester ant colonies alters soil chemistry
361
DEVELOPMENT OF HASH TABLE BASED WEB-READY DATA MINING ENGINE
362
Development of Hazard Analysis by Critical Control Points (HACCP) Procedures to Control Organic Chemical Hazards in the Agricultural Production of Raw Food Commodities
363
Development of HCCI natural gas engines
364
Development of Headspace Solid-Phase Microextraction Method for the Analysis of Pesticide Residues in Fruit and Vegetable Samples using OFAT Design
365
Development of headspace solid-phase microextraction with on-fiber derivatization for determination of hexanal and heptanal in human blood
366
Development of headspace solid-phase microextraction/attenuated total reflection infrared chemical sensing method for the determination of volatile organic compounds in aqueous solutions
367
Development of headspace solid-phase microextraction/attenuated total reflection infrared chemical sensing method for the determination of volatile organic compounds in aqueous solutions Original Research Article
368
Development of headspace solid-phase microextraction–gas chromatography method for the determination of solvent residues in edible oils and pharmaceuticals
369
Development of headspace solid-phase microextraction-gas chromatography–mass spectrometry methodology for analysis of terpenoids in Madeira wines Review Article
370
Development of Health Parameter Model for Risk Prediction of CVD Using SVM
371
Development of Health Research Structures Over the Last 25 Years: Main Achievements and Challenges
372
Development of healthcare chips checking life-style-related diseases
373
Development of healthy eating habits early in life. Review of recent evidence and selected guidelines
374
Development of Heart Failure Following Pace Maker Implantation in a Patient With Congenital Heart Block
375
Development of Heartbeat Based Biometric System Using Wavelet Transform
376
Development of heart-cutting multidimensional gas chromatography coupled to time of flight mass spectrometry for silicon speciation at trace levels in gasoline samples
377
Development of heat sink device by using topology optimization
378
DEVELOPMENT OF HEAT TREATMENT PROCESS THROUGH MICROSTRUCTURAL CONTROL IN 2017 ALUMINUM ALLOY FOR AEROSPACE APPLICATION
379
Development of heat-treatment process for a P/M superalloy for turbine blades
380
Development of heavy duty hybrid carbon–phenolic hemispherical bearings
381
Development of heavy metal biosorbent derived from waste brewing yeast
382
Development of heavy oil hydrocracking catalysts using amorphous silica-alumina and zeolites as catalyst supports Original Research Article
383
Development of Hemileia vastatrix in Coffee Plants With Genetic or Induced Resistance
384
Development of Henoch_Schoenlein Vasculitis Following Ranitidine Administration in a Geriatric Patient
385
Development of Henri Fayol’s Principles of Management on the Implementation of Governance in the Banking Industry in Indonesia
386
Development of hepatic CYP1A and blood vitellogenin in eel (Anguilla anguilla) for use as biomarkers in the Thames Estuary, UK
387
Development of heterogeneous base catalysts for biodiesel production
388
Development of heterogeneous nano-zeolite catalyzing Fenton-like oxidation processes for metalworking fluid wastewater treatment: A comparison with conventional methods
389
Development of Hg-electroplated-iridium based microelectrode arrays for heavy metal traces analysis Original Research Article
390
Development of hierarchy theory for digraphs using concentration theory based on a new type of Lorenz curve
391
Development of High Accuracy Classifier for the Speaker Recognition System
392
Development of high bandwidth powered resonance tube actuators with feedback control
393
Development of high capacity all-solid-state lithium battery using quasi-solid-state electrolyte containing tetraglyme–Li-TFSA equimolar complexes
394
Development of high capacity, high rate lithium ion batteries utilizing metal fiber conductive additives
395
Development of high carbide dissolution/low carbon loss Cr3C2–NiCr coatings by shrouded plasma spraying
396
Development of high chromium ferritic steels strengthened by intermetallic phases
397
Development of high concentrated aqueous silver nanofluid and inkjet printing on ceramic substrates
398
Development of high current negative ion source
399
Development of high data readout rate pixel module and detector hybridization at Fermilab
400
Development of high data readout rate pixel module and detector hybridization at Fermilab
401
Development of high data readout rate pixel module and detector hybridization at Fermilab
402
Development of high density and high efficiency machines
403
Development of high dielectric constant epitaxial oxides on silicon by molecular beam epitaxy
404
Development of high drug loaded pellets by Design of Experiment and population balance model calculation
405
Development of high efficiency large area silicon thin film modules using VHF-PECVD
406
Development of high efficiency nanofilters made of nanofibers
407
Development of high efficiency nanofilters made of nanofibers
408
Development of high efficiency p–i–n amorphous silicon solar cells with the p-μc-Si:H/p-a-SiC:H double window layer
409
Development of high efficiency Stirling-type pulse tube cryocoolers Original Research Article
410
Development of high energy density Li-ion batteries based on LiNi1−x−yCoxAlyO2
411
Development of high energy density small flat spiral cells and battery pack based on lithium/carbon monofluoride (Li/CFx)
412
Development of high field Tokamak with force-balanced coil
413
Development of high flux polyethersulfone hollow fiber ultrafiltration membranes from a low critical solution temperature dope via hypochlorite treatment
414
Development of high frequency tungsten inert gas welding method
415
Development of high gradient IH linac
416
Development of high gradient IH linac
417
Development of high gradient zinc oxide nonlinear resistors and their application to surge arresters
418
Development of high intensity CDC combustor for gas turbine engines
419
Development of high intensity laser-electron photon beams up to 2.9 GeV at the SPring-8 LEPS beamline
420
Development of high intensity laser-electron photon beams up to 2.9 GeV at the SPring-8 LEPS beamline
421
Development of high intensity linear accelerator for heavy ion inertial fusion driver
422
Development of high intensity linear accelerator for heavy ion inertial fusion driver
423
Development of high magnetic field superconducting magnet technology and applications in China
424
Development of high performance Avalanche Photodiodes and dedicated analog systems for HXI/SGD detectors onboard the Astro-H mission
425
Development of high performance Avalanche Photodiodes and dedicated analog systems for HXI/SGD detectors onboard the Astro-H mission
426
Development of high performance carbon composite catalyst for oxygen reduction reaction in PEM Proton Exchange Membrane fuel cells
427
Development of high performance cast stainless steels for ITER shield module applications
428
Development of high performance catalysts for CO oxidation using data-based modeling
429
Development of high performance CFRP shell structures for the pixel detector in the ATLAS experiment at CERN
430
Development of high performance CFRP shell structures for the pixel detector in the ATLAS experiment at CERN
431
Development of high performance charged ligands to control protein transport through charge-modified ultrafiltration membranes
432
Development of high performance concrete using silica fume at relatively high water–binder ratios
433
Development of High Performance Culture and Its Effects to The Firm Success
434
Development of high performance electroless Ni–P–HNT composite coatings
435
Development of high performance liquid chromatographic methods for the determination of cyadox and its metabolites in plasma and tissues of chicken
436
Development of high performance liquid chromatography method for buspirone in rabbit serum: Application to pharmacokinetic study Original Research Article
437
Development of high performance liquid chromatography method for lacidipine in rabbit serum: Application to pharmacokinetic study Original Research Article
438
Development of high performance liquid chromatography with immobilized enzyme onto magnetic nanospheres for screening enzyme inhibitor
439
Development of high performance liquid chromatography/electrospray ionization mass spectrometry for assay of ginkgolic acid (15:1) in rat plasma and its application to pharmacokinetics study
440
Development of high performance magnesium nano-composites using nano-Al2O3 as reinforcement
441
Development of high performance magnesium nano-composites using nano-Al2O3 as reinforcement
442
Development of high performance nano-porous polyethersulfone ultrafiltration membranes with hydrophilic surface and superior antifouling properties
443
Development of high performance of Co/Fe/N/CNT nanocatalyst for oxygen reduction in microbial fuel cells
444
Development of high performance powder metallurgy steels by high-energy milling
445
Development of high performance PPVs: implications of the polymer-microstructure
446
Development of high performances concrete based on the addition of grinded dune sand and limestone rock using the mixture design modelling approach
447
Development of high power laser and relevant technology in India
448
Development of high power long-pulse RF transmitter for ICRF heating in fusion researches and cyclotron accelerator
449
Development of high power VRLA batteries using novel materials and processes
450
Development of high power window prototypes for ECH&CD launchers
451
Development of high precision joints in particle accelerator components performed by vacuum brazing
452
Development of high precision Rb–Sr phlogopite and biotite geochronology; an alternative to 40Ar/39Ar tri-octahedral mica dating
453
Development of high pressure gaseous hydrogen storage technologies
454
Development of high pretensioned and intensive supporting system and its application in coal mine roadways
455
Development of high protonic conductors based on amorphous mesoporous alumina
456
Development of high purity large forgings for nuclear power plants
457
Development of high refractive ZnS/PVP/PDMAA hydrogel nanocomposites for artificial cornea implants
458
Development of High Resolution Melting Analysis as a Diagnos-tic Tool for Molecular Detection of Toxoplasma Infection in Pregnant Women and HIV Positive Cases
459
Development of high sensitive LiNaSO4:Cu,Mg phosphor for TLdosimetry
460
Development of high sensitivity ethanol gas sensor based on Co-doped SnO2 nanoparticles by microwave irradiation technique
461
Development of high sensitivity potentiometric NOx sensor and its application to breath analysis
462
Development of high sensitivity radon detectors
463
Development of high sensitivity radon detectors
464
Development of high sensitivity X-and λ-ray personal dosimeter using photostimulated luminescent detector
465
Development of high solid content aqueous 3Y-TZP suspensions for direct inkjet printing using a thermal inkjet printer
466
Development of high spatial resolution Auger microscope as applied to semiconductor analysis
467
Development of high spatial resolution X-ray CT system at BL47XU in SPring-8
468
Development of high spatial resolution X-ray CT system at BL47XU in SPring-8
469
Development of high spectral resolution CdZnTe pixel detectors for astronomical hard X-ray telescopes
470
Development of high spectral resolution CdZnTe pixel detectors for astronomical hard X-ray telescopes
471
Development of high speed multichannel scalar using line memories
472
Development of high speed multichannel scalar using line memories
473
Development of high speed slurry flow finishing of the inner wall of stainless steel capillary: Polishing and gas flow characteristics of various size of capillaries
474
Development of high speed steel sintered using concentrated solar energy
475
Development of high strength Al–Mg–Si AA6061 alloy through cold rolling and ageing
476
Development of high strength and ductile ultra fine grained dual phase steel with nano sized carbide precipitates in a V–Nb microalloyed steel
477
Development of high strength and strongly cube textured Ni-4.5% W/Ni-15% Cr composite substrate for coated conductor application Original Research Article
478
Development of high strength ductile hypereutectoid steel by cyclic heat treatment process
479
Development of high strength ferritic steel for interconnect application in SOFCs
480
Development of high strength flowable mortar with hybrid fiber
481
Development of high strength hydroxyapatite by solid-state-sintering process
482
Development of high strength, high conductivity copper by friction stir processing
483
Development of high strength, high ductility and high creep resistant iron aluminide
484
Development of high temperature calorimeter: heat capacity measurement by direct heating pulse calorimetry Original Research Article
485
Development of high temperature comprehensive two-dimensional liquid chromatography hyphenated with infrared and light scattering detectors for characterization of chemical composition and molecular weight heterogeneities in polyolefin copolymers
486
Development of high temperature phase-change-material storages
487
Development of high temperature superconducting power cable prototype system
488
Development of high temperature targets at IRIS facility Original Research Article
489
Development of high thermal conductivity Al–Si/C/VGCF composites with C/VGCF foam
490
Development of high throughput evaluation for photocatalyst thin-film
491
Development of high throughput microfluidic cell culture chip for perfusion 3-dimensional cell culture-based chemosensitivity assay
492
Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties
493
Development of high voltage power supply for the KSTAR 170 GHz ECH and CD system
494
Development of high volume fly ash cements for use in concrete construction
495
Development of high water-content cutting fluids with a new concept: Fire prevention and environmental protection
496
DEVELOPMENT OF HIGH YIELDING MILLET VARIETY “SARGODHA BAJRA-2011” RELEASED FOR GENERAL CULTIVATION IN PUNJAB PROVINCE OF PAKISTAN
497
Development of high Zr-containing Ti-based alloys with low Youngʹs modulus for use in removable implants
498
Development of high-activity 252Cf sources for neutron brachytherapy,
499
Development of high-capacity nickel-metal hydride batteries using superlattice hydrogen-absorbing alloys
500
Development of high-current 4H-SiC ACCUFET
501
Development of high-density plasma reactor for high-performance processing and future prospects
502
Development of High-Density Polyethylene /Orange Peels Particulate Bio-Composite
503
Development of high-density RF plasma and application to PVD
504
Development of high-efficiency CIGS integrated submodules using in-line deposition technology
505
Development of high-efficiency modeling technique for weld-bonded steel joints in vehicle structures—Part I: Static experiments and simulations
506
Development of high-efficiency passive counters (HEPC) for the verification of large LEU samples
507
Development of high-efficiency passive counters (HEPC) for the verification of large LEU samples
508
Development of high-efficiency thin-film Si solar cells using zone-melting recrystallization
509
Development of high-energy resolution inverse photoemission technique
510
Development of high-frame-rate neutron radiography and quantitative measurement method for multiphase flow research Original Research Article
511
Development of highly accurate interpolation methodfor mesh-free flow simulations III. Analysis of accuracy and stability
512
Development of highly active SO3H-modified hybrid mesoporous catalyst
513
Development of highly conductive and transparent copper doped zinc oxide thin films via 2-methoxyethanol modified sol–gel dip-coating technique
514
Development of highly conductive nanodomains in poly(3-hexylthiophene) films studied by conductive atomic force microscopy
515
Development of highly creep resistant magnesium alloys
516
Development of highly effective supported nickel catalysts for pre-reforming of liquefied petroleum gas under low steam to carbon molar ratios
517
Development of highly efficient proton recoil counter telescope for absolute measurement of neutron fluences in quasi-monoenergetic neutron calibration fields of high energy
518
Development of highly efficient proton recoil counter telescope for absolute measurement of neutron fluences in quasi-monoenergetic neutron calibration fields of high energy
519
Development of highly efficient thin film silicon solar cells on texture-etched zinc oxide-coated glass substrates
520
Development of highly enantioselective new Lewis basic N-formamide organocatalysts for hydrosilylation of imines with an unprecedented substrate profile
521
Development of Highly Fluorescent Detection Reagents for the Construction of Ultrasensitive Immunoassays
522
Development of highly graphitizable C/VGCF porous foams
523
Development of highly microporous activated carbon from the alcoholic beverage industry organic by-products
524
Development of highly non-cylindrical folds around rigid ellipsoidal inclusions in bulk simple shear regimes: natural examples and experimental modelling
525
Development of highly oriented polymer crystals from row assemblies
526
Development of highly porous microparticles from poly(ether imide) prepared by a spraying/coagulation process
527
Development of highly porous scaffolds based on bioactive silicates for dental tissue engineering
528
Development of highly pure α-helical lipoglycopeptides as self-adjuvanting vaccines
529
Development of highly reactive mono-(meth)acrylates as reactive diluents for dimethacrylate-based dental resin systems
530
Development of highly reliable control systems for the gas-insulated switchgear
531
Development of highly selective and sensitive probes for hydrogen peroxide
532
Development of highly sensitive bioluminescent enzyme immunoassay with ultra-wide measurable range for thyroid-stimulating hormone using firefly luciferase
533
Development of highly sensitive bioluminescent enzyme immunoassay with ultra-wide measurable range for thyroid-stimulating hormone using firefly luciferase Original Research Article
534
Development of highly sensitive BOD sensor and its evaluation using preozonation Original Research Article
535
Development of highly sensitive chemiluminescence enzyme immunoassay based on the anti-recombinant HC subunit of botulinum neurotoxin type A monoclonal antibodies Original Research Article
536
Development of highly sensitive extractive spectrophotometric determination of nickel(II) in medicinal leaves, soil, industrial effluents and standard alloy samples using pyridoxal-4-phenyl-3-thiosemicarbazone
537
Development of highly sensitive nitrogen dioxide monitoring device and its application to wide-area ubiquitous network
538
Development of highly sensitive passive sampler for nitrogen dioxide using porous polyethylene membrane filter as turbulence limiting diffuser
539
Development of highly stable nickel catalyst for methane-steam reaction under low steam to carbon ratio Original Research Article
540
Development of highly stable organic electroluminescent devices with a doped co-host emitter system
541
Development of highly-transparent protein/starch-based bioplastics
542
Development of high-mobility tracked vehicles for over snow operations
543
Development of high-order manifold method
544
Development of High-Order Taylor–Galerkin Schemes for LES
545
Development of high-performance A356/nano-Al2O3 composites
546
Development of high-performance concrete having high resistance to chloride penetration Original Research Article
547
Development of high-performance liquid chromatographic fingerprint for the quality control of Rheum tanguticum Maxim. ex Balf.
548
Development of high-performance liquid chromatographic fingerprints for distinguishing Chinese Angelica from related umbelliferae herbs
549
Development of High-Performance Liquid Chromatographic Method for Vitamin D3 Analysis in Pharmaceutical Preparation
550
Development of high-performance liquid chromatography and nonaqueous capillary electrophoresis methods for the separation of calixarene derivatives Original Research Article
551
Development of high-performance planar borohydride fuel cell modules for portable applications
552
Development of high-performance polysulfone/poly(4-vinylpyridine) composite hollow fibers for CO2/CH4 separation Original Research Article
553
Development of high-performance silver-based gas-diffusion electrodes for chlor-alkali electrolysis with oxygen depolarized cathodes
554
Development of High-Performance Soft Robotic Fish by Numerical Coupling Analysis
555
Development of high-performance solar LED lighting system
556
Development of high-power density Li ion cell and module
557
Development of high-power electrodes for a liquid-feed direct methanol fuel cell
558
Development of High-Power Electromagnetic (HPEM) Standards
559
Development of high-power heating for large helical device
560
Development of high-precision micro-coordinate measuring machine: Multi-probe measurement system for measuring yaw and straightness motion error of XY linear stage
561
Development of high-productivity, strong cation-exchange adsorbers for protein capture by graft polymerization from membranes with different pore sizes
562
Development of high-Q superconducting resonators for use as kinetic inductance detectors Original Research Article
563
Development of high-Q superconducting resonators for use as kinetic inductance sensing elements
564
Development of high-Q superconducting resonators for use as kinetic inductance sensing elements
565
Development of high-radiation-sensitive polymer gel for magnetic resonance imaging in three-dimensional dosimetry
566
Development of high-rate anaerobic ammonium-oxidizing (anammox) biofilm reactors
567
Development of high-rate MRPCs for high resolution time-of-flight systems
568
Development of high-rate MRPCs for high resolution time-of-flight systems
569
Development of high-rate timing RPCs
570
Development of high-rate timing RPCs
571
Development of high-reflectivity neutron supermirrors using an ion beam sputtering technique
572
Development of high-reflectivity neutron supermirrors using an ion beam sputtering technique
573
Development of high-resolution high frame-rate neutron radiography
574
Development of high-resolution high frame-rate neutron radiography
575
Development of high-resolution real-time sub-ppb ethane spectroscopy and some pilot studies in life science
576
Development of high-resolution vacuum crystal spectrometer in a compact helical system and large helical device
577
Development of High-Sensitivity Ion Trap Ion Mobility Spectrometry Time-of-Flight Techniques: A High-Throughput Nano-LC-IMS-TOF Separation of Peptides Arising from a Drosophila Protein Extract
578
Development of high-speed Imaging Plate detector
579
Development of high-speed Imaging Plate detector
580
Development of high-speed railway vehicle derailment simulation – Part I: A new wheel/rail contact method using the vehicle/rail coupled model
581
Development of high-speed railway vehicle derailment simulation – Part II: Exploring the derailment mechanism
582
Development of high-speed superplastic Al alloy by the MA process using Al foil
583
Development of high-strength, economical self-consolidating concrete
584
DEVELOPMENT OF HIGH-TEMPERATURE STOVES WITH A LONG SERVICE LIFE
585
Development of high-temperature superconducting transformers for railway applications
586
Development of high-throughput combinatorial terahertz time-domain spectrometer and its application to ternary composition-spread film
587
Development of high-throughput liquid chromatography injected ion mobility quadrupole time-of-flight techniques for analysis of complex peptide mixtures
588
Development of high-throughput, polarization-maintaining, near-field probes
589
Development of high-viscosity, two-paste bioactive bone cements
590
Development of high-κ HoTiO3 sensing membrane for pH detection and glucose biosensing
591
Development of Hindi-Punjabi Parallel Corpus Using Existing Hindi-Punjabi Machine Translation System and Using Sentence Alignments
592
Development of HoBCO tapes fabricated by ISD process
593
Development of hollow anode penning ion source for laboratory application
594
Development of hollow anode penning ion source for laboratory application
595
Development of hollow fiber membrane systems for nitrogen generation from combustion exhaust gas: Part I. Effects of module configurations
596
Development of hollow fiber membrane systems for nitrogen generation from combustion exhaust gas: Part II: Full-scale module test and membrane stability
597
Development of hollow fiber membranes for CO2 separation
598
Development of hollow fiber membranes for water and salt recovery from highly concentrated brine via direct contact membrane distillation and crystallization
599
Development of Holonic Information Coordination Systems With Failure-Recovery Considerations
600
Development of Homogeneous Liquid-Liquid Microextraction via Flotation Assistance Method for Determination of Benzene, Toluene, Xylene and Styrene in Water Samples
601
Development of homogeneous phase-modulation fluoroimmunoassay for 2,4-dichlorophenoxyacetic acid Original Research Article
602
Development of honeycomb type orifices for flow zoning in PFBR
603
Development of Hospital Information Systems: User Participation and Factors Affecting It
604
Development of hot corrosion resistant coatings for gas turbines burning biomass and waste derived fuel gases
605
Development of Hot Dip Galvanized Steel Strip and Its Application in Automobile Industry Original Research Article
606
Development of hot dry rock technology at the Hijiori test site
607
Development of hot rolled steel sheet with 600 MPa UTS for automotive wheel application
608
Development of hot rolling practices for lithographic sheet using a thermo-mechanical and microstructural model of a reversing hot finishing mill
609
Development of hot-rolled dual-phase weathering steel Cu–P–Cr–Ni–Mo
610
Development of hourly probabilistic utility NOx emission inventories using time series techniques: Part II—multivariate approach
611
Development of hourly probabilistic utility NOx emission inventories using time series techniques: Part I—univariate approach
612
Development of HPC for PC dome of NPR Kaiga
613
Development of HPC for PC dome of NPR Kaiga
614
Development of HPDs for applications in physics and medical imaging
615
Development of HPDs for applications in physics and medical imaging
616
Development of HPDs with an 18-mm-diameter GaAsP photocathode for the MAGIC-II
617
Development of HPDs with an 18-mm-diameter GaAsP photocathode for the MAGIC-II
618
Development of HPLC and UV spectrophotometric methods for the determination of ascorbic acid using hydroxypropyl-β-cyclodextrin and triethanolamine as photostabilizing agents Original Research Article
619
Development of HPLC Fingerprint Analysis of Traditional Diabetes Herbal Jamu Diabetes Plant Materials
620
Development of HPLC method by UV-VIS detection for the quantification of phenolic acids in different Ocimum sanctum Linn. extracts
621
Development of HPLC method for Cyclopia subternata phenolic compound analysis and application to other Cyclopia spp.
622
Development of HPLC method for Cyclopia subternata phenolic compound analysis and application to other Cyclopia spp.
623
DEVELOPMENT OF HPLC METHOD FOR THE DETERMINATION OF GASTRODIN AND PARA-HYDROXYBENZYL ALCOHOL IN TALL GASTRODIA TUBER ON THE POLYGLYCOL-C8 COLUMN
624
Development of HPMA copolymer–anticancer conjugates: Clinical experience and lessons learnt
625
Development of HPTLC analysis to evaluation of Rosmarinic and Caffeic acids in Salvia aegyptiaca extract and analysis of its antioxidant activities
626
Development of HTGR-coated particle fuel technology in Korea Original Research Article
627
Development of HT-PEFC stacks in the kW range
628
Development of Huff curves for Peninsular Malaysia
629
Development of human anxiety
630
Development of human brain functions
631
Development of human dermal epithelial cell-based bioassay for the dioxins Original Research Article
632
Development of human EEG posterior alpha rhythms
633
Development of human IgE biosensor using Sezawa-mode SAW devices
634
Development of Human Recombinant Antibodies Against ROR1 Tumor Antigen
635
Development of Human Sources Competence is the Necessity of Organizational Processes Development
636
Development of human–human hybridoma from anti-Her-2 peptide–producing B cells in immunized NOG mouse
637
Development Of Human-Robot Interaction System (HRIS) Using Autonomous Programmable Humanoid Robot And Motion Sensing Input Device
638
Development of humidity correction algorithm for surface acoustic wave sensors. Part 2. Mathematical model for water and nitrobenzene co-adsorption on aminopropyltriethoxysilane coated surface acoustic wave sensors
639
Development of humidity sensors based on nanostructured carbon films
640
Development of hurricane resistant traffic signal structures
641
Development of hyaluronic acid-based scaffolds for brain tissue engineering
642
Development of hybrid artificial liver support system using spheroid culture and application to warm ischemic liver failure in dog and pig as a preclinical test
643
Development of Hybrid Assembly Workplaces
644
Development of hybrid boundary node method in two-dimensional elasticity
645
Development of hybrid electrical air-cushion tracked vehicle for swamp peat
646
Development of hybrid electrodeposition/slurry diffusion aluminide coatings on Ni-based superalloy with enhanced hot corrosion resistance
647
Development of hybrid electrodialysis-reverse osmosis domestic desalination unit for high recovery of product water Original Research Article
648
Development of hybrid elution systems for efficient purification of stilbenoids using centrifugal partition chromatography coupled to mass spectrometry
649
Development of hybrid fuzzy regression-based metamodeling technique for optimization of sheet metal forming problems
650
Development of hybrid low-pressure MSGC neutron detectors
651
Development of hybrid low-pressure MSGC neutron detectors
652
Development of hybrid materials based on hydroxyethylmethacrylate as supports for improving cell adhesion and proliferation
653
Development of hybrid materials consisting of SiO2 microparticles embedded in phenolic-formaldehydic resin polymer matrices
654
Development of hybrid membrane bioreactor for tannery effluent treatment Original Research Article
655
Development of hybrid method for the prediction of underwater propeller noise
656
Development of hybrid Mg/Al2O3 composites with improved properties using microwave assisted rapid sintering route
657
Development of hybrid model and optimization of surface roughness in electric discharge machining using artificial neural networks and genetic algorithm
658
Development of hybrid optimisation method for Artificial Intelligence based bridge deterioration model — Feasibility study
659
Development of hybrid photodetectors using single-crystal III–V photocathodes
660
Development of hybrid photodetectors using single-crystal III–V photocathodes
661
Development of hybrid photovoltaic-fuel cell system for stand-alone application
662
Development of hybrid polypropylene-steel fibre-reinforced concrete
663
Development of hybrid powered hydraulic construction machinery
664
Development of hybrid predictive models and optimization techniques for machining operations
665
Development of hybrid pulse plasma coating system
666
Development of hybrid robot for construction works with pneumatic actuator
667
Development of hybrid solar-assisted cooling/heating system
668
Development of Hydrate Formation Phase Envelope: An Experimental Approach in One of the Iranian Gas
669
DEVELOPMENT OF HYDRAULIC PULL- METER TO COMPATIBLE WITH MONOTERING DATA INSTRUMENT
670
Development of hydro potential in Republic Srpska
671
Development of hydrocarbon adsorbents, oxygen storage materials for three-way catalysts and NOx storage-reduction catalyst
672
Development of hydrogel implants for urinary incontinence treatment
673
Development of hydrogel microstructures on single-walled carbon nanotube films
674
Development of hydrogen absorption–desorption experimental test bench for hydrogen storage material
675
Development of hydrogen peroxide biosensor based on in situ covalent immobilization of horseradish peroxidase by one-pot polysaccharide-incorporated sol–gel process
676
Development of hydrogen storage for fuel cell generators II: utilization of calcium hydride and lithium hydride
677
Development of hydrogen-selective CAU-1 MOF membranes for hydrogen purification by ‘dual-metal-source’ approach
678
Development of hydrogen-storage alloys of Mg– system by reactive mechanical grinding
679
Development of hydrologically optimal land formation practice for gully erosion susceptible ustifluvent soil
680
Development of hydrologically optimal land formation practice for gully erosion susceptible ustifluvent soil
681
Development of hydro-pedotransfer functions to predict capillary rise and actual evapotranspiration for grassland sites
682
Development of hydrophilic barrier layer on nanofibrous substrate as composite membrane via a facile route
683
Development of hydrophilic fluorogenic derivatization reagents for thiols: 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole
684
Development of hydrophilic nanocarriers for the charged form of the local anesthetic articaine
685
Development of hydropower energy in Turkey: The case of اoruh river basin
686
Development of hydrothermally stable sol–gel derived La2O3-doped Ga2O3–Al2O3 composite mesoporous membrane
687
Development of hydroxyapatite derived from Indian coral
688
Development of hydroxyapatite/calcium silicate composites addressed to the design of load-bearing bone scaffolds
689
Development of hyperbranched polymers with non-covalent interactions for extraction and determination of aflatoxins in cereal samples Original Research Article
690
Development of hyperpolarized noble gas MRI
691
Development of hyperpolarized noble gas MRI
692
Development of hyperspectral imaging technique for the detection of apple surface defects and contaminations Original Research Article
693
Development of hypertension: implications for primary prevention
694
Development of hypothetical components for milk process simulation using a commercial process simulator Original Research Article
695
Development of ICRF wall conditioning technique on divertor-type tokamaks ASDEX Upgrade and JET
696
Development of ideas about food and nutrition from preschool to university
697
Development of Identification Tools to Facilitate Maximal Detection of Patients Admitted with Heart Failure.
698
Development of Identity: Gender Makes a Difference
699
Development of IgA nephropathy-like glomerulonephritis associated with Wiskott–Aldrich syndrome protein deficiency
700
Development of IgY-Based Sandwich ELISA as a Robust Tool for Rapid Detection and Discrimination of Toxigenic Vibrio cholerae
701
Development of IIoT based parts replenishment system for MSME
702
Development of image composite ceramics for high-power millimeter-wave applications Original Research Article
703
Development of Imaging and Liquid Biomarker Analysis for Breast Cancer Screening: A Review
704
Development of imaging energy analyzer using multipole Wien filter
705
Development of imaging microstrip gas chambers and measurement of the polarization of X-rays
706
Development of imaging microstrip gas chambers and measurement of the polarization of X-rays
707
Development of imaging techniques for fast neutron radiography in Japan
708
Development of imaging techniques for fast neutron radiography in Japan
709
Development of imidazolium-type alkaline anion exchange membranes for fuel cell application
710
Development of immobilization technique for liver microsomes
711
Development of immobilized cellulase through functionalized gold nano-particles for glucose production by continuous hydrolysis of waste bamboo chopsticks
712
Development of immobilized enzyme reactors based on human recombinant cytochrome P450 enzymes for phase I drug metabolism studies
713
Development of immobilized lysozyme based active film Original Research Article
714
Development of immobilized membrane-based affinity columns for use in the online characterization of membrane bound proteins and for targeted affinity isolations Original Research Article
715
Development of immunity in rainbow trout (Oncorhynchus mykiss, Walbaum) to Aeromonas hydrophila after the dietary application of garlic
716
Development of immunoaffinity columns for pyraclostrobin extraction from fruit juices and analysis by liquid chromatography with UV detection
717
Development of immunoassays for the analysis of chlorpyrifos and its major metabolite 3,5,6-trichloro-2-pyridinol in the aquatic environment
718
Development of immunochips for the detection of dengue viral antigens Original Research Article
719
Development of Immunochromatographic Strip Tests for Selective and Quantitative Detection of Melamine
720
Development of immunocompetence of broiler chickens
721
Development of immunocompetence of broiler chickens
722
Development of immunohistochemistry and enzyme-linked immunosorbent assays for the detection of circulating antibodies against Enteromyxum scophthalmi (Myxozoa) in turbot (Scophthalmus maximus L.)
723
Development of immunohistochemistry services for cancer care in western Kenya: Implications for low- and middle-income countries
724
Development of Immunologic Assays to Measure Response in Horses Vaccinated with Xenogeneic Plasmid DNA Encoding Human Tyrosinase
725
Development of impact acoustic detection and density separations methods for production of high quality processed beans Original Research Article
726
Development of Impactful Scenarios for Smart Village Approaches on the Sustainability of Peri-Urban Settlements of the Metropolis of Tehran (Case Study: Villages of Islamshahr County)
727
Development of impedimetric and optical calcium biosensor by using modified gold electrode with porcine S100A12 protein
728
Development of implant movement checker for determining dental implant stability
729
Development of imposex and accumulation of butyltin in the tropical muricid Thais distinguenda transplanted to a TBT contaminated site
730
Development of Impregnated Agglomerate Pelletization (IAP) process for fabrication of (Th,U)O2 mixed oxide pellets
731
Development of imprinted materials for the selective extraction of nitroaromatic explosives
732
Development of improved advice for farmers and advisers
733
Development of Improved Methods for Protein Separation and Identification
734
Development of improved nanosilver-based antibacterial textiles via synthesis of versatile chemically modified cotton fabrics
735
Development of improved natural frequency equations for continuous span steel I-girder bridges
736
Development of improved polypropylene adhesive bonding by abrasion and atmospheric plasma surface modifications
737
Development of improved powder for bonded permanent magnets
738
Development of improved tRNAs for in vitro biosynthesis of proteins containing unnatural amino acids Original Research Article
739
Development of In Silico Analysis and Molecular Dynamics Simulation on L67P and D76Y Mutants of the Human Superoxide Dismutase 1(hSOD1) Related to Amyotrophic Lateral Sclerosis
740
Development of in situ a.c. impedance measurement system under constant-current conditions and its application to galvanostatic discharge of electrolytic manganese dioxide in alkaline solution
741
Development of in situ and ex situ seed baiting techniques to detect mycorrhizal fungi from terrestrial orchid habitats
742
Development of in situ Brillouin spectroscopy at high pressure and high temperature with synchrotron radiation and infrared laser heating system: Application to the Earthʹs deep interior
743
Development of in situ cleaning techniques for diagnostic mirrors in ITER
744
Development of in situ diagnostics and tools handled by a light multipurpose carrier for tokamak in-vessel interventions
745
Development of in situ external reflection spectroscopy technique for adsorbed films
746
Development of in situ ion selective sensors for dissolution Original Research Article
747
Development of in situ soft X-ray absorption spectroscopic technique under high temperature and controlled atmosphere
748
Development of in situ sulfur four-isotope analysis with multiple Faraday cup detectors by SIMS and application to pyrite grains in a Paleoproterozoic glaciogenic sandstone
749
Development of in situ thermosensitive drug vehicles for glaucoma therapy
750
Development of in situ, at-wavelength metrology for soft X-ray nano-focusing
751
Development of in situ, at-wavelength metrology for soft X-ray nano-focusing
752
Development of in vitro derived bovine embryos following pronuclear transplantation and in vitro culture
753
Development of in vitro embryo production systems for red deer (Cervus elaphus): Part 1. Effect of epithelial oviductal monolayers and heparin on in vitro sperm motility and penetration of in vitro matured oocytes
754
Development of in vitro embryo production systems for red deer (Cervus elaphus): Part 2. The timing of in vitro nuclear oocyte maturation
755
Development of in vitro embryo production systems for red deer (Cervus elaphus): Part 3. In vitro fertilisation using sheep serum as a capacitating agent and the subsequent birth of calves
756
Development of in vitro matured and fertilized bovine embryos cocultured with bovine oviductal epithelial cells obtained from oviducts ipsilateral to cystic follicles
757
Development of in vitro screening system for assessment of antifilarial activity of compounds
758
Development of in vitro tooth staining model and usage of catalysts to elevate the effectiveness of tooth bleaching
759
Development of in VitroMethods for Toxicity Testing of Workplace Air Contaminants
760
Development of in vivo μCT evaluation of neovascularisation in tissue engineered bone constructs
761
Development of inclusion complex of brinzolamide with hydroxypropyl-β-cyclodextrin
762
Development of Indian passenger transport
763
Development of indications for cardiac resynchronisation therapy in the implantable cardioverter defibrillator population
764
Development of indicators for assessment of the environmental impact of livestock farming in Ireland using the Agri-environmental Footprint Index
765
Development of Indigenous Resilience Scale for Rescue 1122 Workers
766
Development of indirect competitive immunoassay for highly sensitive determination of ractopamine in pork liver samples based on surface plasmon resonance sensor
767
Development of Indirect Immunofluorescence Technique for the Identification of MRC5 Working Seed Cell
768
Development of Indirect Spectrophotometric Method forQuantification ofCephalexin in Pure Form and CommercialFormulation Using Complexation Reaction
769
Development of indirect-competitive quartz crystal microbalance immunosensor for C-reactive protein
770
Development of Individual Learners: Perspective on the Uncertain Future Contribution of E-Learning
771
Development of indoor work environmental air quality index for a dyeing and printing industry
772
Development of inductance simulation system for deflection yoke
773
Development of inductance simulation system for deflection yoke
774
Development of Inductively Coupled Plasma Atomic Emission Spectrometry for Palladium and Rhodium Determination in Platinum-Based Alloy
775
Development of Industrial-Medium-Required Elimination of the 2,3-Butanediol Fermentation Pathway To Maintain Ethanol Yield in an Ethanologenic Strain of Klebsiella oxytoca
776
Development of infants’ attention to faces during the first year
777
Development of inflammation after application of mustard oil or glutamate to the rat temporomandibular joint
778
Development of Inflammatory Bowel Diseases Registry Software
779
Development of Information and decisions management Software for educational council minutes of Medical Sciences Universities
780
Development Of Information Security Awareness Scale
781
Development of Information Technology in the Field of Dermatology
782
Development of Informative System of Autism Spectrum Disorders Registry in Iran: A Brief Report
783
Development of infrared electroabsorption spectroscopy for liquids
784
Development of infrared radiation pyrometer with optical fibers—Two-color pyrometer with non-contact fiber coupler
785
Development of Infrastructural Linkages between Pakistan and Central Asia
786
Development of In-House Head Computed Tomography Dose Index Phantoms Based on Polyester-Resin Materials
787
Development of injectable biocomposites from hyaluronic acid and bioactive glass nano-particles obtained from different sol–gel routes
788
Development of injectable organic/inorganic colloidal composite gels made of self-assembling gelatin nanospheres and calcium phosphate nanocrystals
789
Development of injectable, resorbable drug-releasing copolymer scaffolds for minimally invasive sustained ophthalmic therapeutics
790
Development of in-lab energy-filtered X-ray photoemission electron microscope using air-core-coil-type multipole Wien filter
791
Development of innervation in primary incisors in the foetal period
792
Development of innovative and efficient hydraulic fracturing numerical simulation model and parametric studies in unconventional naturally fractured reservoirs
793
Development of innovative coating technology for pipeline operation crossing the permafrost terrain
794
Development of innovative computer software to facilitate the setup and computation of water quality index
795
Development of innovative micro-pattern gaseous detectors with resistive electrodes and first results of their applications
796
Development of innovative micro-pattern gaseous detectors with resistive electrodes and first results of their applications
797
Development of innovative systems
798
Development of innovative technologies to decrease the environmental burdens associated with using chitin as a biomass resource: Mechanochemical grinding and enzymatic degradation
799
Development of inorganic scintillators
800
Development of inorganic scintillators
801
Development of input output relationships for self-healing Al2O3/SiC ceramic composites with Y2O3 additive using design of experiments
802
Development of in-situ composite surface on mild steel by laser surface alloying with silicon and its remelting
803
Development of in-situ surface area analysis for detonators
804
Development of instructional strategy of computer application software for group instruction
805
Development of instrumentation for simultaneous analysis of total non-methane organic carbon and volatile organic compounds in ambient air
806
Development of insulating coatings for liquid metal blankets
807
Development of insulation structure and enhancement of insulation reliability of 500 kV DC GIS
808
Development of insulation technology with Cyanate Ester resins for ITER TF coils
809
Development of Insulin Resistance through Induction of miRNA-135 in C2C12 Cells
810
Development of integral equation solution for 3D eddy current distribution in a conducting body
811
Development of Integrally Skinned Asymmetric Polyaniline Hollow Fibers for Membrane Applications
812
Development of integrated approach to manage the fusarial wilt of banana
813
Development of Integrated Catalytic Membrane-Based Unit for Biofuel Production
814
Development of integrated chemiluminescence flow sensor for the determination of adrenaline and isoprenaline Original Research Article
815
Development of integrated design methodology for various types of product — service systems
816
Development of Integrated Library System: A Case Study of TRAMPIL Foundation ‘s Learning Center
817
Development of Integrated Monitoring System for Re-Electric Vehicle
818
Development of Integrated Neural Network Model for Identification of Fake Reviews in E-Commerce Using Multidomain Datasets
819
Development of Integrated Planar Chloride Ion-Selective Electrode and Ag/AgCl Reference Electrode based on Chitosan/Cellulose Acetate Membrane for Blood Serum Analysis
820
Development of integrated reformer systems for syngas production
821
Development of Integrated Sediment Rating Curves Using ANNs
822
Development of Integrated Sediment Rating Curves Using ANNs
823
Development of integrated subcriticality-monitoring system for ADS and experimental verification by using STACY
824
Development of integrated subcriticality-monitoring system for ADS and experimental verification by using STACY
825
Development of integrated water reuse strategies Original Research Article
826
Development of integrated ΔE–E silicon detector telescope using silicon planar technology
827
Development of integrated ΔE–E silicon detector telescope using silicon planar technology
828
Development of Intellectual System for Data De-Duplication and Distribution in Cloud Storage
829
Development of Intelligence: Current Research and Theories
830
Development of intelligent position control system using optimal design techniqueT
831
Development of intelligent reusable learning objects for web-based education systems
832
Development of intelligent systems for well drilling and petroleum production
833
Development of intelligent tutoring systems using knowledge structures
834
Development of intense high-energy noble gas ion beams from in-terminal ion injector of tandem accelerator using an ECR ion source
835
Development of intense high-energy noble gas ion beams from in-terminal ion injector of tandem accelerator using an ECR ion source
836
Development of Intensified Technologies of Vanadium-Bearing Titanomagnetite Smelting Original Research Article
837
Development of inter- and intragranular stresses during switching of ferroelectric polycrystals
838
Development of interactional discourse markers: Insights from Turkish childrenʹs and adults’ oral narratives
839
DEVELOPMENT OF INTERACTIVE MULTIMEDIA COURSEWARE (E-CRAFT) FOR CRAFT EDUCATION
840
Development of Interactive Multimedia in Learning Islamic Education
841
Development of Intercity Mode Choice Models for Saudi Arabia
842
Development of interconnect materials for solid oxide fuel cells
843
Development of interconnect materials for solid oxide fuel cells
844
Development of Intercultural Competence in Language Learners: the State of Art
845
Development of interdigitated arrays coated with functional polyaniline/MWCNT for electrochemical biodetection: Application for human papilloma virus
846
Development of interface-induced out-of-plane magnetic anisotropy in Ni/Fe/Ni trilayers
847
Development of interface-induced out-of-plane magnetic anisotropy in Ni/Fe/Ni trilayers
848
Development of interference filters based on multilayer porous silicon structures
849
Development of intergranular thermal residual stresses in beryllium during cooling from processing temperatures Original Research Article
850
Development of interlocking mechanism for shear transfer in composite floor
851
Development of intermediate-temperature solid oxide fuel cells for direct utilization of hydrocarbon fuels
852
DEVELOPMENT OF INTERMITTENT DROUGHT STRESS TOLERANT COMMON BEAN GENOTYPES IN UGANDA
853
Development of intermolecular additive free Pauson–Khand reactions for estrone E-ring extension using microwaves
854
Development of internal cavities in platinum-aluminide coatings during cyclic oxidation
855
Development of internal circulation two-platen IMM for thermoplastic polymer
856
Development of internal jet targets for high-luminosity experiments
857
Development of internal strains in textured Zircaloy-2 during uni-axial deformation
858
Development of internal-antenna-driven large-area RF plasma sources using multiple low-inductance antenna units
859
Development of internal-antenna-driven large-volume RF plasma sources for plasma-based ion implantation
860
Development of international risk analysis standards
861
DEVELOPMENT OF INTERNATIONAL TERRORISM AND THE PHENOMENON OF RELIGIOUSLY MOTIVATED TERROR
862
Development of Internet-Based Instrumentation for the Study of Hall Effect
863
Development of Interpersonal Difficulties Scale for University Students
864
Development of interpretation keys for environmental product declarations
865
Development of intestinal bifidobacteria and lactobacilli in breast-fed neonates
866
Development of intimal thickening in superficial temporal arteries in patients with Moyamoya disease
867
Development of intraepithelial T lymphocytes in the intestine of irradiated SCID mice by adult liver hematopoietic stem cells from normal mice
868
Development of intraformational (Oligocene–Miocene) faults in the northern North Sea: influence of remote stresses and doming of Fennoscandia
869
Development of intraosseous infusion of the distal phalanx to access the foot lamellar circulation in the standing, conscious horse
870
Development of intuitions about the controllability of different mental states
871
Development of invar joint for hydrogen transfer line in JSNS
872
DEVELOPMENT OF INVERSE CIRCADIAN BLOOD PRESSURE PATTERN IN TRANSGENIC HYPERTENSIVE TGR(mREN2)27 RATS
873
Development of inverse natural convective fluid and its thermo-hydrodynamic characteristic
874
Development of ion chambers for the measurement of low energy synchrotron radiation
875
Development of ion chambers for the measurement of low energy synchrotron radiation
876
Development of ion imprinted technique for designing nickel ion selective membrane
877
Development of ion irradiation system for in situ observation of ion irradiated semiconductor surfaces by ultra high vacuum scanning tunneling microscope
878
Development of ion transportation, extraction and neutralization systems for atomic beam resonance method
879
Development of ionomer membranes for fuel cells
880
Development of ionoselective electrochemical sensors by using the sol–gel process
881
Development of ionoselective electrochemical sensors by using the sol–gel process Original Research Article
882
Development of ion-sensitive field-effect transistor-based sensors for benzylphosphonic acids and thiophenols using molecularly imprinted TiO2 films
883
Development of ion-sensitive field-effect transistor-based sensors for benzylphosphonic acids and thiophenols using molecularly imprinted TiO2 films Original Research Article
884
Development of IR systems: New direction
885
Development of Iran’s Electricity Transmission Capacity, Based on Forecasting the Demand Trend Using the System Dynamics Approach
886
Development of Iranian Pistachio Knowledge Management Model Based on Knowledge Management for Development (KM4D) Model
887
Development of Ir-based and Rh-based catalyst electrodes for PEM fuel cell applications
888
Development of IR-Based Short-Range Communication Techniques for Swarm Robot Applications
889
Development of iridium TES by pulsed laser deposition with a Nd:YAG laser
890
Development of iridium TES by pulsed laser deposition with a Nd:YAG laser
891
Development of iridium-catalyzed asymmetric hydrogenation: New catalysts, new substrate scope
892
Development of iron and steel into eco-material
893
Development of iron oxide and titania treated fly ash based ceramic and its bioactivity
894
Development of iron oxide sorbents for Hg0 removal from coal derived fuel gas: Sulfidation characteristics of iron oxide sorbents and activity for COS formation during Hg0 removal
895
Development of iron-based sorbents for Hg0 removal from coal derived fuel gas: Effect of hydrogen chloride
896
Development of irradiation strategies for 3D-laser forming
897
Development of irradiation strategies for free curve laser forming
898
Development of Irrigation Water Quality Index for Wadi Araba Basin, Southern Jordan
899
Development of Islamic Historiography in Malay Archipelago
900
Development of isoerodent maps for Nigeria from daily rainfall amount
901
Development of Isogenic Restorer Line in Extra Long Staple Cotton Variety Suvin
902
Development of isometric force and force control in children
903
Development of iso-octane fuel processor system for fuel cell applications
904
Development of isotope dilution-liquid chromatography tandem mass spectrometry for the accurate determination of fluoroquinolones in animal meat products: Optimization of chromatographic separation for eliminating matrix effects on isotope ratio measureme
905
Development of isotope dilution-liquid chromatography/mass spectrometry combined with standard addition techniques for the accurate determination of tocopherols in infant formula Original Research Article
906
Development of isotropic site–site potential for exchange repulsion energy based on ab initio calculation. I. Closed shell system
907
Development of IT in Japan amid financial difficulties
908
Development of IT-consulting in the system of foreign economic activity of agriculture in the region
909
Development of ITER diagnostic window assemblies
910
Development of ITER divertor Thomson scattering support structure design on the basis of engineering analyses
911
Development of ITER Divertor Vertical Target with Annular Flow Concept - I: Thermal-Hydraulic Characteristics of Annular Swirl Tube
912
Development of ITER Divertor Vertical Target with Annular Flow Concept - II: Development of Brazing Technique for CFC/CuCrZr Joint and Heating Test of Large-Scale Mock-Up
913
Development of ITER sector assembly tools and mock-up
914
Development of ITER tritium transport package
915
Development of ITER-CS model coil terminal assembling by using indium wires
916
Development of IT-SOFC unit cells with anode-supported thin electrolytes via tape casting and co-firing
917
Development of IVF Children,
918
Development of jets, outflows and HH objects
919
Development of joint-controlled rock basins in Bohus granite, SW Sweden
920
Development of JOS-2 human thermoregulation model with detailed vascular system
921
DEVELOPMENT OF JOURNALISM ETHICS:A COMPARATIVE ANALYSIS OF CODES OF ETHICS IN NIGERIA, UNITED KINGDOM, UNITED STATES OF AMERICA, INDIA AND RUSSIA
922
Development of JSNS target vessel diagnosis system using laser Doppler method
923
Development of kaolinite supported ferric oxalate heterogeneous catalyst for degradation of 4-nitrophenol in photo-Fenton process
924
Development of KEPCO equivalent systems for the KEPCO enhanced power system simulator
925
Development of keratin–chitosan–gelatin composite scaffold for soft tissue engineering
926
Development of kerosene fuel processing system for PEFC
927
Development of key fusion technologies at JET
928
Development of key ITER relevant technologies on the Tore Supra tokamak
929
Development of kin bias among rhesus monkeys: maternal transmission or individual learning?
930
Development of kinematics tests for the evaluation of lumbar proprioception and equilibration
931
Development of kinetic analysis system in pump–probe measurement based on femtosecond chromium: forsterite laser and its application to S1–S0 relaxation dynamics of azulene
932
Development of kinetic model for the reaction between SO2/NO and coal fly ash/CaO/CaSO4 sorbent
933
Development of knowledge-based engineering module for diagnosis of defects in casting and interpretation of defects by nondestructive testing
934
Development of KOH activated high surface area carbon and its application to drinking water purification Original Research Article
935
Development of Korean hydrogen fueling station codes through risk analysis
936
Development of Korean red wines using Vitis labrusca varieties: instrumental and sensory characterization
937
Development of KSTAR in-vessel components and heating systems
938
Development of l-3-aminotyrosine suitably protected for the synthesis of a novel nonphosphorylated hexapeptide with low-nanomolar Grb2-SH2 domain-binding affinity
939
Development of La0.6Sr0.4Co0.2Fe0.8O3−δ cathode with an improved stability via La0.8Sr0.2MnO3-film impregnation
940
Development of label-free optical diagnosis for sensitive detection of influenza virus with genetically engineered fusion protein
941
Development of Lake Ladoga ecosystem models: modeling of the phytoplankton succession in the eutrophication process. I
942
Development of Lake Ladoga ecosystem models: modeling of the phytoplankton succession in the eutrophication process. I
943
Development of Landscape Potential of Beypazarı
944
Development of land-use regression models for metals associated with airborne particulate matter in a North American city
945
Development of Language and Social Skills in Hearing-impaired Children With and Without Rehabilitation
946
Development of language in Rett syndrome
947
Development of lanthanum ferrite SOFC cathodes
948
Development of lanthanum nickelate as a cathode for use in intermediate temperature solid oxide fuel cells
949
Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review
950
Development of large area and of position-sensitive timing RPCs
951
Development of large area and of position-sensitive timing RPCs
952
Development of large area gamma-ray camera with GSO(Ce) scintillator arrays and PSPMTs
953
Development of large area gamma-ray camera with GSO(Ce) scintillator arrays and PSPMTs
954
Development of large area integrated silicon tracking elements for the LHC luminosity upgrade
955
Development of large area integrated silicon tracking elements for the LHC luminosity upgrade
956
Development of large area photovoltaic dye cells at 3GSolar
957
Development of large format Si(Li) detectors for the GAPS dark matter experiment
958
Development of large format Si(Li) detectors for the GAPS dark matter experiment
959
Development of large linear silicon drift detectors for the STAR experiment at RHIC
960
Development of large linear silicon drift detectors for the STAR experiment at RHIC
961
Development of large RF driven negative ion sources for neutral beam injection
962
Development of large size dye-sensitized solar cell modules with high temperature durability
963
Development of large size Micromegas detector for the upgrade of the ATLAS Muon system
964
Development of large size Micromegas detector for the upgrade of the ATLAS Muon system
965
Development of large steelmaking slag blocks using a new carbonation process
966
Development of large volume organic scintillators for use in the MASCO telescope
967
Development of large volume organic scintillators for use in the MASCO telescope
968
Development of large-area CIGS modules
969
Development of large-area land cover and forest change indicators using multi-sensor Landsat imagery: Application to the Humber River Basin, Canada
970
Development of large-area, reverse-type APD-arrays for high-resolution medical imaging
971
Development of large-area, reverse-type APD-arrays for high-resolution medical imaging
972
Development of large-capacity gas-insulated transformer
973
Development of large-scale applications in organic solvent nanofiltration and pervaporation for chemical and refining processes
974
Development of large-scale hydrogen liquefaction processes from 1898 to 2009
975
Development of large-volume, high-resolution tracking detectors based on capillaries filled with liquid scintillator
976
Development of laser deposited multilayer zone plate structures for soft X-ray radiation
977
Development of laser lock-in thermography for plasma facing component surface characterisation
978
Development of laser photoelectron spectroscopy based on resonantly enhanced multiphoton ionization
979
Development of laser-based diagnostics for surface characterisation of wall components in fusion devices
980
Development of laser-driven quasi-monoenergetic proton beam line for radiobiology
981
Development of laser-driven quasi-monoenergetic proton beam line for radiobiology
982
Development of laser-fired contacts for amorphous silicon layers obtained by Hot-Wire CVD
983
Development of Laser-Induced Capillary Wave Method for Viscosity Measurement Using Pulsed Carbon Dioxide Laser
984
Development of latent fingermarks by electrochemical deposition of nickel on brass surfaces
985
Development of lateral flow immunoassay system based on superparamagnetic nanobeads as labels for rapid quantitative detection of cardiac troponin I
986
Development of Latrodectus Envenomation Severity Score (LESS); a Severity Index for Widow Spider Bite: Initial Step
987
Development of lattice inversion modified embedded atom method and its applications
988
Development of lattice preferred orientation in clinoamphiboles deformed under low-pressure metamorphic conditions. A SEM/EBSD study of metabasites from the Aracena metamorphic belt (SW Spain)
989
Development of lauroyl sulfated chitosan for enhancing hemocompatibility of chitosan
990
Development of layer-by-layer assembled carbon nanofiber-filled coatings to reduce polyurethane foam flammability
991
Development of LC/MS/MS Methods for Cocktail Dosed Caco-2 Samples Using Atmospheric Pressure Photoionization and Electrospray Ionization
992
Development of LCIA characterisation factors for land use impacts on biodiversity
993
Development of LC–MS determination method and back-propagation ANN pharmacokinetic model of corynoxeine in rat
994
Development of Leadership Competencies among Food and Nutrition Scientists: A Road to Greatness
995
Development of leadership skills: Experience and timing
996
Development of Lead-Free Materials for Radiation Shielding in Medical Settings: A Review
997
Development of lead-free silver ink for front contact metallization
998
Development of leaf shape
999
Development of Lean Implementation Framework for Indonesian Batik Small and Medium-Sized Enterprises
1000
Development of Learning Design for Mathematics Manipulatives Learning based on E-learning and Character Building
