ليست عنوان مقالات لاتين Improved extreme wind speed estimation for wind engineering applications Improved oxidation resistance of conducting polychloroprene composites

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Improved extreme wind speed estimation for wind engineering applications

2

Improved Facial Action Unit Recognition using Local and Global Face Features

3

Improved fairness algorithms for rings with spatial reuse

4

Improved fallows: effects of species interaction on growth and productivity in monoculture and mixed stands

5

Improved Fast Integer Sorting in Linear Space

6

Improved fast neutron spectroscopy via detector segmentation

7

Improved fast neutron spectroscopy via detector segmentation

8

Improved fast photoresponse from Al doped ZnO nanowires network decorated with Au nanoparticles

9

Improved Fastness Properties of some Novel Triarylmethane Dyes on ‎Acrylic Fibres

10

Improved fatigue endurance in Mn-doped Bi3.25La0.75Ti3O12 thin films

11

Improved fatigue life of acrylic bone cements reinforced with zirconia fibers

12

Improved fatigue properties of ultrafine-grained copper under cyclic torsion loading Original Research Article

13

Improved fatty acid detection in micro-algae and aquatic meiofauna species using a direct thermal desorption interface combined with comprehensive gas chromatography–time-of-flight mass spectrometry

14

Improved fault quantification for a plate structure

15

Improved fault recovery for core based trees

16

Improved FE model to simulate interfacial bond-slip behavior in composite beams under cyclic loadings

17

Improved feasible solution algorithms for high breakdown estimation

18

Improved feature extraction and matching in urban environments based on 3D viewpoint normalization

19

Improved feature reduction in input and feature spaces

20

Improved feature selection and classification by the 2-additive fuzzy measure

21

Improved feature selection based on genetic algorithms for real time disruption prediction on JET

22

Improved FEM simulation model for tire–soil interaction

23

Improved ferrocement jacketing for restrengthening of square RC short column

24

Improved ferroelectric polarization of KSrBi2Ta3O12 thin films

25

Improved fiber distribution and mechanical properties of engineered cementitious composites by adjusting the mixing sequence

26

Improved field emission from amorphous carbon nanotubes by surface functionalization with stearic acid Original Research Article

27

Improved field emission from multiwall carbon nanotubes with nano-size defects produced by ultra-low energy ion bombardment Original Research Article

28

Improved field emission properties of carbon nanotubes decorated with Ta layer

29

Improved field emission properties of double-walled carbon nanotubes decorated with Ru nanoparticles Original Research Article

30

Improved field emission property of graphene by laser irradiation

31

Improved field emission stability and uniformity of printed carbon nanotubes prepared using high energy-milled glass frit

32

Improved field oriented control of an LIM having joints in its secondary conductors

33

Improved field-weakening control for IFO induction motor

34

Improved filling rate and enhanced magnetic properties of Fe-filled carbon nanotubes by annealing and magnetic separation

35

Improved film cooling from cylindrical angled holes with triangular tabs: effect of tab orientations

36

Improved film deposition of carbon and carbon nitride materials on patterned substrates by ionized magnetron sputtering

37

Improved filtering parameter determination for the Goldstein radar interferogram filter

38

Improved fingerprint identification with supervised filtering enhancement

39

Improved finite difference calculation of magnetic field effects; inclusion of analytic asymptotics Original Research Article

40

Improved finite element computations of torque in brushless permanent magnet motors

41

Improved finite element method for stochastic problems

42

Improved finite element modelling of a cable-stayed bridge through systematic manual tuning

43

Improved Finite Impulse Response Filters for Enhanced Destriping of Geostationary Satellite Data

44

Improved finite-lattice estimates of the properties of two quantum spin models on the infinite square lattice

45

Improved Finnis–Sinclair potential for bcc vanadium solid

46

Improved fire resistant performance of load bearing cold-formed steel interior and exterior wall systems

47

Improved Fischer–Tropsch synthesis for gasoline over Ru, Ni promoted Co/HZSM-5 catalysts

48

Improved fish species identification by use of lab-on-a-chip technology

49

Improved fitting of PIXE spectra: the Voigt profile and Si(Li) detector modeling

50

Improved fitting of PIXE spectra: the Voigt profile and Si(Li) detector modeling

51

Improved fixed center approximation of the Faddeev equations for the image system with image

52

Improved fixed parameter tractable algorithms for two “edge” problems: MAXCUT and MAXDAG

53

Improved flame retardant properties of epoxy resin by fluorinated MMT/MWCNT additives

54

Improved flame retardant properties of epoxy resin by fluorinated MMT/MWCNT additives

55

Improved Flexibility and Scalability by Interpreting Story Diagrams

56

Improved flexibility of thermally stable poly-lactic acid (PLA)

57

Improved flexural fatigue resistance of PVA fiber-reinforced concrete subjected to freezing and thawing cycles

58

Improved flexural–torsional stability analysis of thin-walled composite beam and exact stiffness matrix

59

Improved flexural–torsional stability analysis of thin-walled composite beam and exact stiffness matrix

60

Improved Florence model and optimization of two-component armor against single impact or two impacts

61

Improved flow- and pressure model for cone crushers

62

Improved flow pattern map for accurate prediction of the heat transfer coefficients during condensation of R-134a in smooth horizontal tubes and within the low-mass flux range

63

Improved flow through bridge waterways by entrance rounding

64

Improved flow through bridge waterways by entrance rounding

65

Improved flowability and compactibility of spherically agglomerated crystals of ascorbic acid for direct tableting designed by spherical crystallization process

66

Improved fluorescence peak integration in the Tekran 2537 for applications with sub-optimal sample loadings

67

Improved fluorescence signal with tapered polymer optical fibers under side-illumination

68

Improved Fluorescent PCR-Based Assay for Sizing CGG Repeats at the FRAXA Locus

69

Improved flux estimation and stator-resistance adaptation scheme for sensorless control of induction motor

70

Improved flux pattern by third harmonic injection for multiphase induction machines using neural network

71

Improved flux pinning through Ce additions in melt textured YBa2Cu3O7−δ

72

Improved flux pinning through Ce additions in melt textured YBa2Cu3O7−δ

73

Improved focusing capability for inelastic X-ray spectrometer at 3-ID of the APS: A combination of toroidal and Kirkpatrick-Baez (KB) mirrors

74

Improved focusing capability for inelastic X-ray spectrometer at 3-ID of the APS: A combination of toroidal and Kirkpatrick-Baez (KB) mirrors

75

Improved Forecasting of Short Term Electricity Demand by using of Integrated Data Preparation and Input Selection Methods

76

Improved forest biomass estimates using ALOS AVNIR-2 texture indices

77

Improved forest change detection with terrain illumination corrected Landsat images

78

IMPROVED FORMULA FOR PROMPT FISSION NEUTRON SPECTRUM

79

Improved formulation for spatial stability and free vibration of thin-walled tapered beams and space frames

80

Improved formulation of electron kinetic theory approach for laser ultra-short-pulse heating

81

Improved formulation of liposome-encapsulated hemoglobin with an anionic non-phospholipid

82

Improved Formulation of One-Step Approach Suitable for Initially Non-Flat Configurations and Forward Simulation Original Research Article

83

Improved formulation of W\O\W multiple emulsion for insulin encapsulation. Influence of Tthe chemical structure of insulin

84

Improved formulation, branch-and-cut and tabu search heuristic for single loop material flow system design

85

Improved Formulations of Shape Factors for the Freezing and Thawing Time Prediction of Foods

86

Improved FPT algorithm for feedback vertex set problem in bipartite tournament

87

Improved fracture toughness of boride coating developed with a diffusion annealing process

88

Improved fracture toughness of carbon fiber composite functionalized with multi walled carbon nanotubes Original Research Article

89

Improved fracture toughness of immiscible polypropylene/ethylene-co-vinyl acetate blends with multiwalled carbon nanotubes

90

Improved framework for particle swarm optimization: Swarm intelligence with diversity-guided random walking

91

Improved framework for the maintenance of the JET intershot analysis chain

92

Improved free chlorine amperometric sensor chip for drinking water applications Original Research Article

93

Improved free-interface substructures representation method

94

Improved free-standing GaN Schottky diode characteristics using chemical mechanical polishing

95

Improved Frequency Regulation in Microgrids using Metaheuristic Algorithms

96

Improved frequency selective filters

97

Improved fructan accumulation in perennial ryegrass transformed with the onion fructosyltransferase genes 1-SST and 6G-FFT

98

Improved fuel utilization in microfluidic fuel cells: A computational study

99

Improved full-vectorial beam propagation method with high accuracy for arbitrary optical waveguides

100

Improved Function and Maturation of Dendritic Cells Stimulated by Recombinant pp65 Protein: In vitro Design

101

Improved Functional Causal Likelihood-Based Causal Discovery Method for Diabetes Risk Factors

102

Improved functional mapping of the human amygdala using a standard functional magnetic resonance imaging sequence with simple modifications

103

Improved functional perturbation method for reliability analysis of randomly heterogeneous beams

104

Improved functional properties of trypsin modified by monosubstituted amino-β-cyclodextrins

105

Improved Functional Recovery of Ischemic Rat Hearts due to Singlet Oxygen Scavengers Histidine and Carnosine

106

Improved functional reserve of hypertrophied contra lateral liver after portal vein ligation in rats

107

Improved Functional Status and Quality of Life in Prohibitive Surgical Risk Patients With Degenerative Mitral Regurgitation After Transcatheter Mitral Valve Repair

108

Improved functional viual acuity after punctal occluion in dry eye patient

109

Improved functionality and control in the isomerization of a calix[4]arene-capped azobenzene

110

Improved functionalization and recovery of carboxylated carbon nanotubes using the acoustic cavitation approach

111

Improved functionalization of electrospun PLLA/gelatin scaffold by alternate soaking method for bone tissue engineering

112

Improved fuzzy clustering algorithm using adaptive particle swarm optimization for nonlinear system modeling and identification

113

Improved fuzzy control design for nonlinear Markovian-jump systems with incomplete transition descriptions

114

Improved fuzzy neural networks for solving relational equations

115

Improved fuzzy partitions for fuzzy regression models Original Research Article

116

Improved fuzzy sliding-mode control for a linear servo motor system

117

IMPROVED GA AND PSO CULLED HYBRID ALGORITHM FOR ANTENNA ARRAY PATTERN SYNTHESIS

118

Improved Gabor Filtering Application in the Identification of Handwriting

119

Improved Gagliardo–Nirenberg–Sobolev inequalities on manifolds with positive curvature

120

Improved Gamma-Heating Calculational Methods for Fast Reactors and Their Validation for Plutonium-Burning Configurations

121

Improved gas chromatographic–mass spectrometric determination of the N-methylcarbamoyl adduct at the N-terminal valine of globin, a metabolic product of the solvent N,N-dimethylformamide

122

Improved gas chromatography-flame ionization detector analytical method for the analysis of epoxy fatty acids

123

Improved gas chromatography–tandem mass spectrometry determination of pesticide residues making use of atmospheric pressure chemical ionization

124

Improved gas resource calculation using modified material balance for overpressure gas reservoirs

125

Improved gas sensing and dielectric properties of Fe doped hydroxyapatite thick films: Effect of molar concentrations

126

Improved gas sensing of electrospun carbon fibers based on pore structure, conductivity and surface modification Original Research Article

127

Improved gas sensing performances in SPR sensors by transducers activation

128

Improved gauge actions on anisotropic lattices I. Study of fundamental parameters in the weak coupling limit Original Research Article

129

Improved Gauss-Seidel projection method for micromagnetics simulations

130

Improved GC method for the determination of the active principles of Catha edulis

131

Improved GC/MS methods for measuring hourly PAH and nitro-PAH concentrations in urban particulate matter

132

Improved gelatinase a selectivity by novel zinc binding groups containing galardin derivatives

133

Improved gelling properties of whey protein isolate by addition of xanthan gum

134

Improved gene expression pattern using Epstein–Barr virus (EBV)-based plasmid and cationic emulsion

135

Improved gene transfer efficiency of a DNA-lipid-apatite composite layer by controlling the layer molecular composition

136

Improved general scaling factors and systematic tests of the SAC method for estimating correlation energies of molecules

137

Improved generalization of MCE parameter estimation with application to speech recognition

138

Improved generalized Atkin algorithm for computing square roots in finite fields

139

Improved generalized quasilinearization (GQL) method Original Research Article

140

IMPROVED GENERATION QUALITY OF A WIND DRIVEN INDUCTION GENERATOR CONNECTED TO GRID USING ARTIFICIAL NEURAL NETWORK

141

Improved generator coordinate Hartree–Fock method: application to first-row atoms

142

Improved Generic Object Retrieval In Large Scale Databases By SURF Descriptor

143

Improved genetic algorithm for design optimization of truss structures with sizing, shape and topology variables

144

Improved genetic algorithm for multidisciplinary optimization of composite laminates

145

Improved Genetic Algorithm for Power Economic Dispatch of Units With Valve-Point Effects and Multiple Fuels

146

Improved genetic algorithm for solving multiobjective solid transportation problem with fuzzy numbers

147

Improved genetic algorithm for the permutation flowshop scheduling problem

148

Improved genetic algorithm for VLSI floorplan design with non-slicing structure

149

Improved Genetic Algorithms for Deterministic Optimization and Optimization under Uncertainty. Part I. Algorithms Development

150

Improved Genetic Algorithms for Deterministic Optimization and Optimization under Uncertainty. Part II. Solvent Selection under Uncertainty

151

Improved geopolymerization of bottom ash by incorporating fly ash and using waste gypsum as additive

152

Improved Germline Transmission in Chicken Chimeras Produced by Transplantation of Gonadal Primordial Germ Cells into Recipient Embryos

153

Improved GFP gene transfection mediated by polyamidoamine dendrimer-functionalized multi-walled carbon nanotubes with high biocompatibility

154

Improved g-level calculations for coil planet centrifuges

155

Improved global convergence probability using multiple independent optimizations

156

Improved global exponential stability criteria of cellular neural networks with time-varying delays

157

Improved global robust exponential stability criteria for interval neural networks with time-varying delays

158

Improved global robust stability criterion for delayed neural networks

159

Improved global simulations of gross primary product based on a new definition of water stress factor and a separate treatment of C3 and C4 plants

160

Improved global simulations of gross primary product based on a new definition of water stress factor and a separate treatment of C3 and C4 plants

161

Improved global α-optical model potential at low energies Original Research Article

162

Improved global α-optical model potentials at low energies Original Research Article

163

Improved global–local simulated annealing formulation for solving non-smooth engineering optimization problems

164

Improved glucosamine and N-acetylglucosamine production by an engineered Escherichia coli via step-wise regulation of dissolved oxygen level

165

Improved glucose and IL-6 by aerobic training despite no change in insulin and insulin resistance in obese women

166

Improved glucose electrochemical biosensor by appropriate immobilization of nano-ZnO

167

Improved glucuronide hydrolysis in the determination of urinary 1-hydroxypyrene

168

Improved Glycaemic Control with Insulin Glargine as Part of a Basal-bolus Regimen in T2DM Patients Inadequately Controlled on Premixed Therapy

169

Improved glycemic control induces regression of left ventricular mass in patients with type 1 diabetes mellitus

170

IMPROVED GOATS MILK AND MEAT PRODUCTION FEEDING GUAR HAY IN MARGINAL RAINFED AREAS OF POTHWAR REGION OF PAKISTAN

171

Improved gold and silver extraction from a refractory antimony ore by pretreatment with alkaline sulphide leach

172

Improved Gō-like Models Demonstrate the Robustness of Protein Folding Mechanisms Towards Non-native Interactions

173

Improved GPS travelling wave fault locator for power cables by using wavelet analysis

174

Improved Graft Mesenchymal Stem Cell Survival in Ischemic Heart With a Hypoxia-Regulated Heme Oxygenase-1 Vector Original Research Article

175

Improved graphene growth in UHV: Pit-free surfaces by selective Si etching of SiC(0001)–Si with atomic hydrogen

176

Improved graphitization and electrical conductivity of suspended carbon nanofibers derived from carbon nanotube/polyacrylonitrile composites by directed electrospinning Original Research Article

177

Improved gravitational grain size separation method

178

Improved gravitational search algorithm for parameter identification of water turbine regulation system

179

Improved green properties of gelcast alumina through multiple synergistic interaction of polysaccharides

180

Improved Green’s function measurement for hybridization expansion quantum Monte Carlo Original Research Article

181

Improved Grey predictor rolling models for wind power prediction

182

Improved GRG method for the optimal synthesis of linkages in function generation problems

183

Improved grounded-capacitor SRCO using only a single PFTFN

184

Improved groundwater vulnerability mapping for the karstic chalk aquifer of south east England

185

Improved Group Search Optimization Algorithm for Multi- Objective Optimal Reactive Power Dispatch

186

Improved group search optimization method for solving CHPED in large scale power systems

187

Improved growth and essential oil yield and quality in Foeniculum vulgare mill on mycorrhizal inoculation supplemented with P-fertilizer

188

Improved growth and nutrition status in children with methylmalonic or propionic acidemia fed an elemental medical food

189

Improved growth of GaN layers on ultra thin silicon nitride/Si (1 1 1) by RF-MBE

190

Improved growth of Ge quantum dots in Ge/Si stacked layers by pre-intermixing treatments

191

Improved growth of lipoprotein lipase deficient kittens by feeding a low-fat, highly digestible diet

192

Improved growth of salinity-stressed soybean after inoculation with salt pre-treated mycorrhizal fungi

193

Improved growth with bioabsorbable sutures in both high- and low-pressure zones

194

Improved growth, productivity and quality of tomato (Solanum lycopersicum L.) plants through application of shikimic acid

195

Improved GUT and SUSY breaking by the same field Original Research Article

196

Improved gyratory crushing operation by the assessment of liner wear and mantle profile redesign

197

Improved H2 production rate by hydrolysis of Ammonia Borane using quaternary alloy catalysts

198

Improved H2 sensing properties of Co-doped SnO2 nanofibers

199

Improved H2-sensing performance of nanocluster-based highly porous tungsten oxide films operating at moderate temperature

200

Improved Haar and Walsh functions over triangular domains

201

Improved haemocompatibility of cysteine-modified polymers via endogenous nitric oxide

202

Improved haemorrheological properties by Ginkgo biloba extract (Egb 761) in type 2 diabetes mellitus complicated with retinopathy

203

Improved Halbach sensor for NMR scanning of drill cores

204

Improved Hamiltonian for Minkowski Yang-Mills theory Original Research Article

205

Improved Hand Hygiene Compliance through “I Save Lives with Clean Hands” Campaign

206

Improved hardness and corrosion resistance of iron by Ti/TiN multilayer coating and plasma nitriding duplex treatment

207

Improved hardness and hierarchic influences on wear in submicron sintered alumina

208

Improved hardness and hierarchic influences on wear in submicron sintered alumina

209

Improved hardness and oxidation resistance for CrAlN hard coatings with Y addition by magnetron co-sputtering

210

Improved hard-thermal-loop effective action for hot QED and QCD Original Research Article

211

Improved Hardy inequalities in the Grushin plane

212

Improved harmony search algorithms for sizing optimization of truss structures

213

Improved HBT linearity with a "post-distortion"-type collector linearizer

214

Improved Healing of Colonic Anastomosis with Allotransplantation of Axillary Skin Fibroblasts in Rats

215

Improved health and growth of fish fed mannan oligosaccharides: Potential mode of action

216

Improved Health-Related Quality of Life and Functional Status After Surgical Ventricular Restoration

217

Improved health-relevant functionality in dark germinated Mucuna pruriens sprouts by elicitation with peptide and phytochemical elicitors

218

Improved heat stability by whey protein–surfactant interaction

219

Improved heat storage rate for an automobile coolant waste heat recovery system using phase-change material in a fin–tube heat exchanger

220

Improved heating-element configurations for a tunnel oven

221

Improved heavy quark potential at finite temperature from anti-de Sitter supergravity

222

Improved hemocompatibility of poly(ethylene terephthalate) modified with various thiol-containing groups

223

Improved Hemodynamics and Outcome After Modified Norwood Operation on the Beating Heart

224

Improved Hessian approximation with modified secant equations for symmetric rank-one method

225

Improved heterogenized catalysts for selective propylene oligomerization to 2,3-dimethylbutenes prepared by oxidative addition of polymer-anchored β-dithioacetylacetonate ligands to nickel(0) complexes Original Research Article

226

Improved heteronuclear decoupling in REDOR with the use of TPPM

227

Improved heteronuclear decoupling schemes for solid-state magic angle spinning NMR by direct spectral optimization

228

Improved heuristic methods for multiple stage production planning

229

Improved heuristics for sequencing cutting patterns

230

Improved heuristics for the early/tardy scheduling problem with no idle time

231

Improved heuristics for the n-job single-machine weighted tardiness problem

232

Improved heuristics for the traveling purchaser problem

233

Improved HF propagation and system performance predictions under ionospherically extreme conditions Original Research Article

234

Improved Hidden Markov Model training for multiple sequence alignment by a particle swarm optimization—evolutionary algorithm hybrid

235

Improved hidden Markov models in the wavelet-domain

236

Improved Higgs mass stability bound in the standard model and implications for supersymmetry

237

Improved high cycle fatigue properties of a new magnesium alloy

238

Improved high performance liquid chromatographic method for determination of carotenoids in the microalga Chlorella pyrenoidosa

239

Improved high performance liquid chromatographic separation of anthocyanin compounds from grapes using a novel mixed-mode ion-exchange reversed-phase column

240

Improved high power Li-ion batteries with Li2RuO3 addition: A fast charging and fast cycling study

241

Improved high Q value of 0.5LaAlO3-0.5SrTiO3 microwave dielectric ceramics at low sintering temperature

242

Improved high Q value of CaTiO3–Ca(Mg1/3Nb2/3)O3 solid solution with near zero temperature coefficient of resonant frequency

243

Improved high q value of MgTiO3-CaTiO3 microwave dielectric ceramics at low sintering temperature

244

Improved high recovery brackish water desalination process based on fluidized bed air stripping Original Research Article

245

Improved high resistivity ZnS films on HgCdTe for passivation of infrared devices

246

Improved high temperature properties of SiC-ceramics sintered with Lu2O3-containing additives

247

Improved high temperature stability of NH3-SCR catalysts based on rare earth vanadates supported on TiO2single bondWO3single bondSiO2

248

Improved high temperature stability of organic solar cells using a phosphine oxide type cathode modification layer

249

Improved high thermal stability of pullulanase from a newly isolated thermophilic Bacillus sp. AN-7

250

Improved highly sensitive method for determination of nicotine and cotinine in human plasma by high-performance liquid chromatography

251

Improved High-Order Analysis of Linear Vibrations of a Thick Sandwich Panel with an Electro-Rheological Core by Using Exponential Shear Deformation Theory

252

Improved high-performance liquid chromatographic analysis of terazosin in human plasma

253

Improved high-performance liquid chromatographic detection of paclitaxel in patientʹs plasma using solid-phase extraction, and semi-micro-bore C18 separation and UV detection

254

Improved high-performance liquid chromatographic method for the combined analysis of phospholipase, lipoxygenase and cyclooxygenase activities

255

Improved high-performance liquid chromatographic method for the pharmacokinetic studies of a novel iron chelator, CP502, in rats

256

Improved high-performance liquid chromatographic method in the analysis of adenovirus particles

257

Improved high-performance liquid chromatographic method to estimate aminosugars and its application to glycosaminoglycan determination in plasma and serum

258

Improved high-Q microwave dielectric material using B2O3-doped MgNb2O6 ceramics

259

Improved high-Q microwave dielectric resonator using CuO-doped MgNb2O6 ceramics

260

Improved high-Q microwave dielectric resonator using ZnO and WO3-doped Zr0.8Sn0.2TiO4 ceramics

261

Improved high-T/sub c/ superconductor sampler circuits using Josephson transmission line buffers

262

Improved High-Throughput Sequencing of the Human Oral Microbiome: From Illumina to PacBio

263

Improved high-throughput sunflower and cotton genomic DNA extraction and PCR fidelity

264

Improved Hilbert moment thermal QCD sum rules for Bs meson and stability with respect to moment parameter

265

Improved Histochemical Test for In Situ Detection of Hydrogen Peroxide in Cells Undergoing Oxidative Burst or Lignification

266

Improved Hiyama cross-coupling reactions using HOMSi® reagents: a novel application of a palladacycle

267

Improved Hoeffding-style performance guarantees for accurate classifier

268

Improved Hoeffding-style performance guarantees for accurate classifiers

269

Improved Hoeffding-style performance guarantees for accurate classifiers

270

Improved hollow-core photonic crystal fiber design for delivery of nanosecond pulses in laser micromachining applications

271

Improved holographic Yang–Mills at finite temperature: Comparison with data Original Research Article

272

Improved homogeneity of microcrystalline absorber layer in thin-film silicon tandem solar cells

273

Improved homopolymer separation to enable the application of 1H NMR and HPLC for the determination of the reaction parameters of the graft copolymerization of acrylic acid onto starch Original Research Article

274

Improved homotopy perturbation method for solving Fredholm type integro-differential equations

275

Improved hormonal and oxidative changes by Royal Jelly in the rat model of PCOS: An experimental study

276

IMPROVED HORTICULTURAL PRACTICES AGAINST LEAF WILTING, ROOT ROT AND NUTRIENT UPTAKE INMANGO (Mangiferaindica L.)

277

Improved HPLC method for analysis of 1-hydroxypyrene in human urine specimens of cigarette smokers

278

Improved HPLC method for the simultaneous determination of allantoin, uric acid and creatinine in cattle urine

279

Improved HPLC method for the simultaneous determination of tramadol and O-desmethyltramadol in human plasma

280

Improved HPLC methodology for food control – furfurals and patulin as markers of quality

281

Improved HPLC methodology for monitoring thiopurine metabolites in patients on thiopurine therapy

282

Improved human oocyte development after vitrification: a comparison of thawing methods

283

Improved HVAC operation to preserve a church organ

284

Improved hybrid approach to transient stability assessment

285

Improved hybrid MMSE detection for turbo-trellis-coded modulation-assisted multi-user OFDM systems

286

Improved hybrid simulated annealing algorithm for navigation scheduling for the two dams of the Three Gorges Project

287

Improved hydrate equilibrium measurements in ternary gas and black oil systems

288

Improved hydrocarbons analysis of heavy petroleum fractions by high temperature comprehensive two-dimensional gas chromatography

289

Improved hydrodynamic equations for the accurate prediction of diffusivities in supercritical carbon dioxide

290

Improved hydrodynamic permeability and antifouling properties of poly(vinylidene fluoride) membranes using polydopamine nanoparticles as additives

291

Improved hydrogen cycling kinetics of nano-structured magnesium/transition metal multilayer thin films

292

Improved hydrogen desorption in lithium alanate by addition of SWCNT–metallic catalyst composite

293

Improved hydrogen desorption properties of ammonia borane by Ni-modified metal-organic frameworks

294

Improved hydrogen evolution activities under visible light irradiation over NaTaO3 codoped with lanthanum and chromium

295

Improved hydrogen gas production in electrohydrolysis of vinegar fermentation wastewater by scrap aluminum and salt addition

296

Improved hydrogen generation from alkaline NaBH4 solution using cobalt catalysts supported on modified activated carbon

297

Improved hydrogen generation from alkaline solution using carbon-supported as catalysts

298

Improved hydrogen generation from formic acid

299

Improved hydrogen production by coupled systems of hydrogenase negative photosynthetic bacteria and fermentative bacteria in reverse micelles

300

Improved hydrogen production by uptake hydrogenase deficient mutant strain of Rhodobacter sphaeroides O.U.001

301

Improved hydrogen production from water splitting using TiO2–ZnO mixed oxides photocatalysts

302

Improved hydrogen production of the downstream bioreactor by coupling single chamber microbial fuel cells between series-connected photosynthetic biohydrogen reactors

303

Improved hydrogen production under microaerophilic conditions by overexpression of polyphosphate kinase in Enterobacter aerogenes

304

Improved hydrogen production via thermophilic fermentation of corn stover by microwave-assisted acid pretreatment

305

Improved hydrogen sensing characteristics of a Pt/SiO2/GaN Schottky diode

306

Improved hydrogen sorption performance of NbF5-catalysed NaAlH4

307

Improved hydrogen sorption/desorption capacity of exfoliated NiCl2-graphite intercalation compound effected by thermal treatment

308

Improved hydrogen storage behaviours of nanocrystalline and amorphous Mg2Ni-type alloy by Mn substitution for Ni

309

Improved hydrogen storage capacity through hydrolysis of solid NaBH4 catalyzed with cobalt boride

310

Improved hydrogen storage in the modified metal-organic frameworks by hydrogen spillover effect

311

Improved hydrogen storage performance of defected carbon nanotubes with Pd spillover catalysts dispersed using supercritical CO2 fluid

312

Improved hydrogen storage performance of Li–Mg–N–H materials by optimizing composition and adding single-walled carbon nanotubes

313

Improved hydrogen storage performance of Mg(NH2)2/LiH mixture by addition of carbon nanostructured materials

314

Improved hydrogen storage performance of MgH2–NaAlH4 composite by addition of TiF3

315

Improved hydrogen storage performance of the LiNH2–MgH2–LiBH4 system by addition of ZrCo hydride

316

Improved hydrogen storage properties in Mg-based thin films by tailoring structures

317

Improved hydrogen storage properties of LiBH4 by mechanical milling with various carbon additives

318

Improved hydrogen storage properties of LiBH4 doped Li–N–H system

319

Improved hydrogen storage properties of Mg-based nanocomposite by addition of LaNi5 nanoparticles

320

Improved hydrogen storage reversibility of LiBH4 destabilized by Y(BH4)3 and YH3

321

Improved hydrogenolysis (C–S, C–M) function with basic supported hydrodesulfurization catalysts

322

Improved hydrogen-sensing performance of a Pd/GaN Schottky diode with a surface plasma treatment approach

323

Improved hydrogen-sensitive properties of MISiC Schottky sensor with thin NO-grown oxynitride as gate insulator

324

Improved hydrolysis properties of Mg3RE hydrides alloyed with Ni

325

Improved hydrophilic interaction chromatography method for the identification and quantification of glucosinolates

326

Improved Hydrophilicity of Membrane by Ethylenediaminetetraacetic Acid Modification

327

Improved hydrophilicity of zinc oxide-incorporated layer-by-layer polyelectrolyte film fabricated by dip coating method

328

Improved hydrophobicity of inorganic–organic hybrid mesoporous silica with cage-like pores

329

Improved Hydrosolar Roof for buildings’ air conditioning

330

Improved hydrothermal stability of niobia-supported Pd catalysts Original Research Article

331

Improved ID-based security framework for ad hoc network

332

Improved identification and autotuning of PI controllers for MIMO processes by relay techniques

333

Improved identification of coronary artery disease in patients with left bundle branch block by use of dobutamine stress echocardiography and comparison with myocardial perfusion tomography

334

Improved identification of Hammerstein plants using new CPSO and IPSO algorithms

335

Improved identification of metabolites in complex mixtures using HSQC NMR spectroscopy Original Research Article

336

Improved Identification of Patients With Coronary Artery Disease by the Use of New Lipid and Lipoprotein Biomarkers

337

Improved identification of squeeze-film damper models for aeroengine vibration analysis

338

Improved identification of sulfidic soil materials by a modified incubation method

339

Improved identification of volcanic features using Landsat 7 ETM+

340

Improved IEEE802.11 PCF performance using silence detection and cyclic shift on stations polling

341

Improved image contrast with mangafodipir trisodium (MnDPDP) during MR-guided percutaneous cryosurgery of the liver

342

Improved image decoding over noisy channels using minimum mean-squared estimation and a Markov mesh

343

Improved image quality in abdominal computed tomography reconstructed with a novel Deep Learning Image Reconstruction technique – initial clinical experience

344

Improved image quality in digital mammography with image processing

345

Improved Image Quality of Coronary CT Angiography Using Automatic Motion Correction

346

Improved imaging in delicate situations

347

Improved imaging of secondary phases in solids by energy-filtering TEM

348

Improved imaging of secondary phases in solids by energy-filtering TEM

349

Improved immobilization of biomolecules to quinone-rich polydopamine for efficient surface functionalization

350

Improved immobilized carbon dioxide capture sorbents

351

Improved Immune Function with Donor B-cell Infusion after Semi-Allogeneic Bone Marrow Transplantation in Mice

352

Improved Immune Functions with Administration of a Low-Fat Diet in a Burn Animal Model

353

Improved immuno double labelling for cell and structural biology

354

Improved Immunogenicity of Tetanus Toxoid by Brucella abortus S19 LPS Adjuvant

355

Improved immunogold labeling of epoxy sections by the use of propylene oxide as additional agent in dehydration, infiltration and embedding

356

Improved immunological detection of Spongospora subterranea

357

Improved Impact Toughness of 13Cr Martensitic Stainless Steel Hardened by Laser

358

Improved implementation and robustness study of the X-FEM for stress analysis around cracks

359

Improved implementation of the extended finite element method for stress analysis around cracks

360

Improved implicit integrators for transient impact problems - geometric admissibility within the conserving framework

361

Improved implicit integrators for transient impact problems––dynamic frictional dissipation within an admissible conserving framework Original Research Article

362

Improved in ovulo embryo culture for stenospermocarpic grapes (Vitis vinifera L.)

363

Improved in silico prediction of carcinogenic potency (TD50) and the risk specific dose (RSD) adjusted Threshold of Toxicological Concern (TTC) for genotoxic chemicals and pharmaceutical impurities

364

Improved in situ calibration technique for ITER ex-vessel neutron yield monitor

365

Improved in vitro and in vivo biocompatibility of dual plasma modified titanium alloy

366

Improved in vitro corrosion resistance of a NiTi alloy by high current pulsed electron beam treatment

367

Improved in vitro detection of hemolysin BL from Bacillus cereus

368

Improved in vitro propagation of Curcuma caesia, a valuable medicinal plant

369

Improved in vivo human carotid artery wall T2⁎ estimation

370

Improved in vitro rooting and acclimatization of Jatropha curcas plantlets

371

Improved Incompressible Smoothed Particle Hydrodynamics method for simulating flow around bluff bodies

372

Improved incorporation and stabilisation of β-carotene in hydrocolloids using glycerol

373

Improved indicators of cell membrane potential that use fluorescence resonance energy transfer Original Research Article

374

Improved indicators of water use performance and productivity for sustainable water conservation and saving

375

Improved indoor thermal comfort during defrost with a novel reverse-cycle defrosting method for air source heat pumps

376

Improved induced matchings in sparse graphs Original Research Article

377

Improved induction technique for electric charge measuring

378

Improved industrial water management through membrane processes — the case of a large thermo-electric power plant Original Research Article

379

IMPROVED INFEASIBLE-INTERIOR-POINT ALGORITHM FOR LINEAR COMPLEMENTARITY PROBLEMS

380

Improved inference for a linear mixed-effects model when the subpopulation effects are clustered

381

Improved inference in nonparametric regression using Lk-smoothing splines

382

Improved inference in the evaluation of mutual fund performance using panel bootstrap methods

383

Improved inference in the evaluation of mutual fund performance using panel bootstrap methods

384

Improved Inference of Mutation Rates: I. An Integral Representation for the Luria–Delbrück Distribution

385

Improved Inference of Mutation Rates: II. Generalization of the Luria–Delbrück Distribution for Realistic Cell-Cycle Time Distributions

386

Improved inference on a scalar fixed effect of interest in nonlinear mixed-effects models

387

Improved inference on a scalar fixed effect of interest in nonlinear mixedeffects models

388

Improved information on electron screening in (7)Li(p,(alpha))(alpha) using the Trojan-horse method

389

Improved infrared and visible emission spectra of the H3 and D3 molecules

390

Improved infrared spectrophotometer for point-of-care patient 13C-urea breath testing in the primary care setting

391

Improved inhomogeneous Strichartz estimates for the Schrِdinger equation

392

Improved in-hospital mortality in women undergoing coronary artery bypass grafting

393

Improved initial density dependence of the viscosity and a corresponding states function for high pressures

394

Improved initial discharge capacity of nanostructured Ni-Co spinel ferrite as anode material in lithium ion batteries

395

Improved injectability and in vitro degradation of a calcium phosphate cement containing poly(lactide-co-glycolide) microspheres

396

Improved innovation through the integration of Quality Gates into the Enterprise and Product Lifecycle Roadmaps

397

Improved input parameters for diffusion models of skin absorption

398

Improved Insert Geometry for Reducing Tank-Wall Losses in Pad-Mounted Transformers

399

Improved instantaneous frequency estimation using an adaptive short-time Fourier transform

400

Improved instrumental sensitivity for Cd determination in aqueous solutions using Wavelength Dispersive X-ray Fluorescence Spectrometry, Rh-target tube instrumentation

401

Improved instrumental sensitivity for Cd determination in aqueous solutions using Wavelength Dispersive X-ray Fluorescence Spectrometry, Rh-target tube instrumentation

402

Improved instrumental variables and generalized method of moments estimators

403

Improved Insulin Resistance with Clearance of Chronic Hepatitis C, Genotype 4

404

Improved integral formulations for fast 3-D method-of-momentssolvers

405

Improved integral inequalities in n independent variables

406

Improved integro-modal approach with pressure distribution assessment and the use of overlapped cavities

407

Improved interatomic potential for stressed Si, O mixed systems

408

IMPROVED INTERCEPTION OF COMBINED SEWAGE IN THE TRONDHEIM-H0VRINGEN WASTEWATER SYSTEM

409

IMPROVED INTERCEPTION OF COMBINED SEWAGE IN THE TRONDHEIM-H0VRINGEN WASTEWATER SYSTEM

410

Improved interfacial adhesion in carbon fiber/polyether sulfone composites through an organic solvent-free polyamic acid sizing

411

Improved interfacial adhesion in PBO fiber/bismaleimide composite with oxygen plasma plus aging and humid resistance properties

412

Improved interfacial and electrical properties of atomic layer deposition HfO2 films on Ge with La2O3 passivation

413

Improved interfacial mechanical properties of Al2O3-13wt%TiO2 plasma-sprayed coatings derived from nanocrystalline powders Original Research Article

414

Improved interframe registration based nonuniformity correction for focal plane arrays

415

Improved interior point method for OPF problems

416

Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibers Original Research Article

417

Improved intermediate asymptotics for the heat equation

418

Improved intermolecular water potential from global geometry optimization of small water clusters using local MP2 Original Research Article

419

Improved interpolation of meteorological forcings for hydrologic applications in a Swiss Alpine region

420

Improved interpretation of in-diffusion measurements with confined swelling clays

421

Improved interpretation of solar wind ion measurements via high-resolution magnetic field data Original Research Article

422

Improved Interstage Mortality With the Modified Norwood Procedure: A Meta-Analysis

423

Improved inter-tube coupling in CNT bundles through carbon ion irradiation Original Research Article

424

Improved interval estimation for the two-parameter Birnbaum–Saunders distribution

425

Improved intraocular bioavailability of ganciclovir by mucoadhesive polymer based ocular microspheres: development and simulation process in Wistar rats

426

Improved intrapartum surveillance with PR interval analysis of the fetal electrocardiogram: A randomized trial showing a reduction in fetal blood sampling

427

Improved invariant set estimation for general-scale families

428

Improved inventory models with service level and lead time

429

Improved inverse halftoning using vector and texture-lookup table-based learning approach

430

Improved iodometric method for simultaneous determination of non-stoichiometric oxygen and total copper content in YBCO superconductors

431

Improved ion guide for heavy-ion fusion–evaporation reactions

432

Improved ion guide for heavy-ion fusion–evaporation reactions

433

Improved ionic conductivity in NdGdZr2O7: Influence of Sc3+ substitution

434

Improved ionic conductivity of nitrile rubber/ionic liquid composites

435

Improved ionic conductivity of nitrile rubber/Li(CF3SO2)2N composites by adding imidazolium-type zwitterion

436

Improved iron solubility in carrot juice fermented by homo- and hetero-fermentative lactic acid bacteria Original Research Article

437

Improved irrigation water demand forecasting using a soft-computing hybrid model

438

Improved isolation and detection of pathogenic Vibrio parahaemolyticus from seafood using a new enrichment broth

439

Improved isolation of glucuronan from algae and the production of glucuronic acid oligosaccharides using a glucuronan lyase Original Research Article

440

Improved isospin dependent quantum molecular dynamics model and its application to fusion reactions near Coulomb barrier Original Research Article

441

Improved Itchy Quality of Life Following Topical Application of Sweet Almond Oil in Patients with Uremic Pruritus: A Randomized, Controlled Trial

442

Improved iterative olefination approach to oligosaccharide mimics: stereoselective synthesis of β-(1→6)-d-galactopentaose methylene isostere

443

Improved iterative olefination approach to oligosaccharide mimics: stereoselective synthesis of β-(1→6)-d-galactopentaose methylene isostere

444

Improved iterative olefination approach to oligosaccharide mimics: stereoselective synthesis of β-(1→6)-d-galactopentaose methylene isostere

445

Improved J and COD estimation by GE/EPRI method in elastic to fully plastic transition zone

446

Improved Jacobi matrix method for the numerical solution of Fredholm integro-differential-difference equations

447

Improved Jacobi-function method with symbolic computation to construct new double-periodic solutions for the generalized Ito system

448

Improved Jacobin elliptic function method and its applications

449

Improved Jsc in CIGS thin film solar cells using a transparent conducting ZnO:B window layer

450

Improved Kaplan-Meier Estimator in Survival Analysis Based on Partially Rank-Ordered Set Samples

451

Improved kernel fisher discriminant analysis for fault diagnosis

452

Improved kernel principal component analysis for fault detection

453

Improved kHz-SLR tracking techniques and orbit quality analysis for LEO missions Original Research Article

454

Improved kinetic data from analysis of complex hydrocarbon mixtures by using SIMCA Original Research Article

455

Improved kinetic model for water splitting thermochemical cycles using Nickel Ferrite

456

Improved kinetic modeling of the early generation of CO2 from the Boom Clay kerogen. Implications for simulation of CO2 production upon disposal of high activity nuclear waste

457

Improved kinetics-based gold cyanide extraction with mixture of LIX79+TOPO utilizing hollow fiber membrane contactors

458

Improved King’s methods with optimal order of convergence based on rational approximations

459

Improved K-Means Algorithm for Capacitated Clustering Problem

460

Improved K-Means Algorithm for Identification MR Brain Image Tumor

461

Improved k-nearest neighbor classification

462

Improved Knock Detection Method Based on New Time-Frequency Analysis In Spark Ignition Turbocharged Engine

463

Improved knowledge management through first-order logic in engineering design ontologies

464

Improved K-value correlation for UAE crude oil components at high pressures using PVT laboratory data☆

465

Improved K-values correlation for UAE crude oil components at low pressures using PVT laboratory data

466

Improved k–ε model and wall function formulation for the RANS simulation of ABL flows

467

Improved k–ε two-equation turbulence model for canopy flow

468

Improved l1-SPIRiT using 3D walsh transform-based sparsity basis

469

Improved L2-stabilization theory to compute resonances under multichannel conditions

470

Improved label propagation algorithms with node attribute and link strength for community detection

471

Improved labeling technique and radiochemical purity determination of 99mTc-N-acetylcysteine

472

Improved land cover and emission factors for modeling biogenic volatile organic compounds emissions from Hong Kong

473

Improved land surface emissivities over agricultural areas using ASTER NDVI

474

Improved language modelling through better language model evaluation measures

475

Improved Laplacian Smoothing of Noisy Surface Meshes

476

Improved large mesoporous ordered molecular sieves—Stabilization and acid/base functionalization

477

Improved large optical cavity design for 10.6 μm (Al)GaAs quantum cascade lasers

478

Improved large-scale production of vitamin B12 by Pseudomonas denitrificans with betaine feeding

479

Improved large-scale synthesis of phenylisoserine and the taxol C-13 side chain

480

Improved large-signal performance of paralleled DC-DC converters current sharing

481

Improved Laser Beams-Based Security Fence to Protect Borders

482

Improved Late Cretaceous and early Cenozoic Paleomagnetic apparent polar wander path for the Pacific plate

483

Improved latex agglutination test for detection of antibodies in serum and cerebrospinal fluid of Trypanosoma brucei gambiense infected patients

484

Improved LDSE processing for the avoidance of overplating yielding 19.2% efficiency on commercial grade crystalline Si solar cell

485

Improved lead alloys for lead/acid positive grids in electric-vehicle applications

486

Improved leakage current and ferromagnetic properties in magnetic field annealed BiFeO3-based ceramics

487

Improved learning of I2C distance and accelerating the neighborhood search for image classification

488

Improved Lebesgue constants on the triangle

489

Improved lectin-mediated immobilization of human red blood cells in superporous agarose beads

490

Improved left atrial transport and function with orthotopic heart transplantation by bicaval and pulmonary venous anastomoses

491

Improved left ventricular endocardial border delineation and opacification with OPTISON (FS069), new echocardiographic contrast agent : Results of phase III multicenter trial

492

Improved Left Ventricular Function After Chronic Left Ventricular Unloading

493

Improved left ventricular function after thiamine supplementation in patients with congestive heart failure receiving long-term furosemide therapy,

494

Improved legume tree fallows and tillage effects on structural stability and infiltration rates of a kaolinitic sandy soil from central Zimbabwe

495

Improved Level Balancing with Diode-Clamped Multi-Level Inverter Configuration Based on Multi-Winding Transformer

496

Improved LIBS limit of detection of Be, Mg, Si, Mn, Fe and Cu in aluminum alloy samples using a portable Echelle spectrometer with ICCD camera

497

Improved lifetime in organic solar cells using a bilayer cathode of organic interlayer/Al

498

Improved lifetime of microchannel-plate PMTs

499

Improved lifetime of microchannel-plate PMTs

500

Improved light absorption in thin-film silicon solar cells by integration of silver nanoparticles

501

Improved light extraction efficiency with angle independent electroluminescence spectrum in nano-phosphor coated white organic light emitting diodes

502

Improved light output power of InGaN/GaN MQW LEDs by lower temperature p-GaN rough surface

503

Improved light scattering and surface plasmon tuning in amorphous silicon solar cells by double-walled carbon nanotubes

504

Improved light transitions from scintillators to new photocathode windows

505

Improved light transitions from scintillators to new photocathode windows

506

Improved light trapping in thin-film silicon solar cells via alternated n-type silicon oxide reflectors

507

Improved light yield of lead tungstate scintillators

508

Improved light yield of lead tungstate scintillators

509

Improved light-load efficiency for synchronous rectifier voltage regulator module

510

Improved lignocellulose conversion to biofuels with thermophilic bacteria and thermostable enzymes

511

Improved likelihood ratio and score tests on concentration parameters of von Mises–Fisher distributions

512

Improved likelihood ratio tests for cointegration rank in the VAR model

513

Improved likelihood ratio tests for cointegration rank in the VAR model

514

Improved likelihood ratio tests on the von Mises–Fisher distribution

515

Improved likelihood-based inference for the MA(1) model

516

Improved likelihood-based inference for the stationary AR(2) model

517

Improved limit on the branching ratio of μ−→e+ conversion on titanium

518

Improved limit on the electron capture decay branch of 176Lu

519

Improved limits for natural α radioactivity of tungsten with a CaWO4 scintillating bolometer

520

Improved Lindstedt–Poincaré method for the solution of nonlinear problems

521

Improved linear interpolation method for the estimation of snow-covered area from optical data

522

Improved linear multi-step methods for stochastic ordinary differential equations

523

Improved linear systolic algorithms for substring statistics

524

Improved liposome immunomigration strip assay for alachlor determination

525

Improved liquid chromatographic method for determination of carotenoids in Taiwanese mango (Mangifera indica L.)

526

Improved liquid chromatographic method for mitoxantrone quantification in mouse plasma and tissues to study the pharmacokinetics of a liposome entrapped mitoxantrone formulation

527

Improved liquid chromatographic method for the analysis of photosynthetic pigments of higher plants

528

Improved liquid chromatographic method with pulsed electrochemical detection for the analysis of gentamicin

529

Improved liquid chromatographic method with pulsed electrochemical detection for the analysis of kanamycin

530

Improved liquid chromatography tandem mass spectrometry method for the determination of phenolic compounds in virgin olive oil

531

Improved liquid chromatography–mass spectrometry performance in quantitative analysis using a nanosplitter interface

532

Improved liquid chromatography—Online radioactivity detection for metabolite profiling

533

Improved liquid chromatography–tandem mass spectrometry method for the analysis of eptifibatide in human plasma

534

Improved liquid-chromatography tandem mass spectrometry method for the determination of the bioactive dipeptides, carnosine and anserine: Application to analysis in chicken broth

535

Improved liquid–liquid–liquid microextraction method and its application to analysis of four phenolic compounds in water samples

536

Improved lithium capacity of defective V2O5 materials

537

Improved lithium manganese oxide spinel/graphite Li-ion cells for high-power applications

538

Improved lithium-ion transport in NASICON-type lithium titanium phosphate by calcium and iron doping

539

Improved Liu estimator in a linear regression model

540

Improved LMI representations for the analysis and the design of continuous-time systems with polytopic type uncertainty

541

Improved load-frequency control with capacitive energy storage

542

Improved local control of invasive bladder cancer by concurrent cisplatin and preoperative or definitive radiation: CM Coppin, MK Gospodarowicz, K James, IF Tannock, B Zee, J Carson, J Pater, LD Sullivan for the National Cancer Institute of Canada Clinica

543

Improved local convergence analysis of inexact Gauss–Newton like methods under the majorant condition in Banach spaces

544

Improved local search algorithms for the rectangle packing problem with general spatial costs

545

Improved localization of a “hot spot” in the lungs for an array of four HPGe detectors—the simultaneous use of two gamma energies

546

Improved localization of a “hot spot” in the lungs for an array of four HPGe detectors—the simultaneous use of two gamma energies

547

Improved logarithmic-geometric mean inequality and its application

548

Improved Long Ureteral Reconstruction with Ileum By Longitudinal Clipping and Mucosal Stripping: an Animal Study

549

Improved Long Ureteral Reconstruction with Ileum By Longitudinal Clipping and Mucosal Stripping: an Animal Study

550

Improved Long-range Order of Silicious MCM-41 by Gradual Heating of Synthesis Gel

551

Improved long-term survival associated with stent deployment during percutaneous coronary interventions: Results from a registry of 3399 patients

552

Improved long-term survival seen after lung volume reduction surgery compared to continued medical therapy for emphysema

553

Improved loquat (Eriobotrya japonica Lindl.) cultivars: Variation of phenolics and antioxidative potential

554

Improved Los Alamos model applied to the neutron induced fission of 235U and 237Np

555

Improved Los Alamos model applied to the neutron induced fission of 239Pu and 240Pu and to the spontaneous fission of Pu isotopes

556

Improved loss calculations at an ATM multiplexer

557

Improved low energy electron projection in-line holograms reconstruction: application to the holograms of a tungsten tip

558

Improved low temperature removal of NOX from lean-burn exhaust via adsorption on TiO2-modified Ag–alumina Original Research Article

559

Improved Low Voltage - Ride Through (LVRT) ‎Performance of an Active Distribution Grid by ‎Providing a Bidirectional Converter to Control DC ‎Bus Voltage Ripple

560

Improved Low Voltage Ride-Through Capability of DFIG with ESO Controller under Unbalanced Network Conditions

561

Improved Low Voltage Ride-through Capability of PV Connected to the Unbalanced Main Grid

562

Improved lower bound for the vertex connectivity of image-cages Original Research Article

563

Improved lower bound on the number of balanced symmetric functions over GF(p)

564

Improved lower bound on the Shannon capacity of C7

565

Improved Lower Bounds for Learning from Noisy Examples: An Information-Theoretic Approach

566

Improved lower bounds for the capacitated lot sizing problem with setup times

567

Improved lower bounds for the link length of rectilinear spanning paths in grids

568

Improved low-lying energy levels determined from solar coronal forbidden and spin-forbidden lines in the 500–1500 Å range

569

Improved low-order models for heat conduction problems

570

Improved low-temperature hydrogen generation from NH3BH3 and TiO2 composites pretreated with water

571

Improved low-temperature performance of lithium-ion cells with quaternary carbonate-based electrolytes

572

Improved luminance and luminous efficiency of AC plasma display panel

573

Improved luminescence of Y2MoO6:Eu3+ by doping Li+ ions for light-emitting diode applications

574

Improved luminescence properties of pulsed laser deposited Y3(Al,Ga)5O12:Tb thin films by post deposition annealing

575

Improved luminescent efficiency of a red organic dye with modified molecular structure

576

Improved luminescent properties of red-emitting Ca0.54Sr0.16Eu0.08Gd0.12(MoO4)0.2(WO4)0.8 phosphor for LED application by charge compensation

577

Improved luminosity model and albedo for Saturn

578

Improved luminous transmittance and diminished yellow color in VO2 energy efficient smart thin films by Zn doping

579

Improved lumped analysis of transient heat conduction in a nuclear fuel rod

580

Improved lumped models for asymmetric cooling of a long slab by heat convection

581

Improved lumped models for combined convective and radiative cooling of a wall

582

Improved lumped models for transient combined convective and radiative cooling of multi-layer composite slabs

583

Improved lumped models for transient radiative cooling of a spherical body

584

Improved lumped parameter formulation for simplified LWR thermohydraulic analysis

585

Improved lumped-differential formulations in hyperbolic heat conduction

586

Improved lung function by urokinase infusion in canine lung transplantation using non-heart-beating donors

587

Improved Machinability in Hard Milling and Strategies for Steel Development

588

Improved magnetic coordinate representation for ideal ballooning stability calculations with the COBRA code Original Research Article

589

Improved magnetic properties of Cr3+ doped SrFe12O19 synthesized via microwave hydrothermal route

590

Improved magnetic trapped field in thin-wall YBCO single-domain samples by high-pressure oxygen annealing

591

Improved magnetization transfer in solid-state NMR with fast magic angle spinning

592

Improved magnetoelectricity by uniaxial magnetic field pressed and sintered composites in BaTiO3 (x)–BaFe12O19 (1 − x) system (x = 0.8, 0.6)

593

Improved magnetotransport in LCMO-Polymer (PPS) composite

594

Improved Maintenance Strategy for Reciprocating Compressor Based on Reliability and Safety

595

Improved maize cultivated area estimation over a large scale combining MODIS–EVI time series data and crop phenological information

596

Improved MALDI-MS Analysis of Oligonucleotides through the Use of Fucose as a Matrix Additive

597

Improved management of asthma

598

IMPROVED MANAGEMENT OF MALAGASY EUCALYPTUS GRANDIS SEED ORCHARDS USING MICROSATELLITES AND PATERNITY ASSIGNMENT

599

Improved management of Vertisols in the semiarid tropics for increased productivity and soil carbon sequestration

600

Improved maneuverability of power plants for better grid stability

601

Improved manufacturing method and mechanical performances of carbon fiber reinforced lattice-core sandwich cylinder

602

Improved many-to-one sweeping

603

Improved Mapping Algorithms Performance in NoCs Design Based on Cellular Learning Automata

604

Improved market segmentation by fuzzifying crisp clusters: A case study of the energy market in Spain

605

Improved marketing decision making in a customer churn prediction context using generalized additive models

606

Improved mass constraints in the MSSM from vacuum stability

607

Improved mass transfer using a pore former in cathode catalyst layer in the direct methanol fuel cell

608

Improved materials characterisation through the application of geometry reconstruction to quasi-static and high-strain-rate tension tests

609

Improved Mathematical Model for Helicopter Flight Dynamics Applications

610

Improved mathematical model for mass transfer in fractured reservoirs during the gas injection process

611

Improved matrix inversion in image plane parallel MRI

612

Improved matrix pair undecidability results

613

Improved matrix reasoning is limited to training on tasks with a visuospatial component

614

Improved maximum entropy analysis with an extended search space

615

Improved maximum frequency estimation with application to instantaneous mean frequency estimation of surface electromyography

616

Improved maximum likelihood estimation of parameters in the Maxwell distribution

617

Improved Maximum Likelihood Frequency Offset Estimation Based on Likelihood Metric Design

618

Improved measurement characteristics in collimation testing using Lau interferometry and Fourier fringe analysis technique

619

IMPROVED MEASUREMENT METHODS FOR RAILWAY ROLLING NOISE

620

Improved measurement of Asteroid (4) Vesta’s rotational axis orientation

621

Improved measurement of formaldehyde in water-soluble polymers by high-performance liquid chromatography coupled with post-column reaction detection

622

Improved Measurement of Pressure Gradients in Aortic Coarctation by Magnetic Resonance Imaging

623

Improved measurement of the lifetime of the τ lepton

624

Improved measurement of the probability for gluon splitting into bb̄ in Z0 decays

625

Improved measurement technique for the characterization of organic and inorganic phase change materials using the T-history method

626

Improved measurements for better decision on heat recovery solutions with heat pumps

627

Improved measurements of ICRF antenna coupling at ASDEX Upgrade and comparison with the ICRF coupling code TOPICA

628

Improved measurements of Na+ fluxes in plants using calixarene-based microelectrodes

629

Improved measurements of the drop size distribution of a freezing drizzle event

630

Improved Mechanical and Electrochemical Properties of Artificial Graphite Anode Using Water-Based Binders in Lithium-Ion Batteries

631

Improved mechanical and functional properties of elastomer/graphite nanocomposites prepared by latex compounding Original Research Article

632

Improved mechanical and swelling behavior of the composite hydrogels prepared by ionic monomer and acid-activated Laponite

633

Improved mechanical and tribological properties of tin–bronze journal bearing materials with newly developed tribaloy alloy additive

634

Improved mechanical behavior of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions

635

Improved mechanical behavior of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions

636

Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg–Zn–Ca alloys through Pd-alloying

637

Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg–Zn–Ca alloys through Pd-alloying

638

Improved mechanical performance of solution-processed MWCNT/Ag nanoparticle composite films with oxygen-pressure-controlled annealing Original Research Article

639

Improved mechanical performance: Shear behaviour of strain-hardening cement-based composites (SHCC)

640

Improved mechanical properties and hydrophilicity of electrospun nanofiber membranes for filtration applications by dopamine modification

641

Improved Mechanical Properties and Thermal Stability of Sm-Co High Temperature Magnets Resulting From Surface Modifications Original Research Article

642

Improved mechanical properties in cast Al–Si alloys by combined alloying of Fe and Cu

643

Improved Mechanical Properties in Nb2O5/V2O5 Doped Spinel Ferrites

644

Improved mechanical properties of AZ31 magnesium alloy plates by pre-rolling followed by warm compression

645

Improved mechanical properties of bulk glassy alloys containing spherical pores

646

Improved mechanical properties of carbon nanotube/polymer composites through the use of carboxyl-epoxide functional group linkages

647

Improved mechanical properties of CFRP laminates at elevated temperatures and freeze–thaw cycling

648

Improved mechanical properties of Cu matrix composites reinforced with β-Si3N4 whiskers

649

Improved mechanical properties of epoxy reinforced by low content nanodiamond powder

650

Improved mechanical properties of hydroxyapatite whisker-reinforced poly(l-lactic acid) scaffold by surface modification of hydroxyapatite

651

Improved mechanical properties of hydroxyapatite/poly(ɛ-caprolactone) scaffolds by surface modification of hydroxyapatite

652

Improved mechanical properties of retorted carrots by ultrasonic pre-treatments

653

Improved mechanical properties of retorted carrots by ultrasonic pre-treatments

654

Improved mechanical properties of SnO2:F thin film by structural modification Review Article

655

Improved mechanical properties of solution-cast silicone film reinforced with electrospun polyurethane nanofiber containing carbon nanotubes

656

Improved mechanical properties of Ti–15V–3Cr–3Sn–3Al alloy by electron beam welding process plus heat treatments and its microstructure evolution

657

Improved mechanical property and biocompatibility of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) for blood vessel tissue engineering by blending with poly(propylene carbonate)

658

Improved mechanical property and internal friction of pure Mg processed by ECAP

659

Improved Mechanical Reliability of the HeartMate XVE Left Ventricular Assist System

660

Improved mechanical strength and electrical conductivity of organogels containing carbon nanotubes Original Research Article

661

Improved mechanistic foam simulation with foam catastrophe theory

662

Improved medium for isolatin Rhizobium meliloti from soil

663

Improved medium for isolatin Rhizobium meliloti from soil

664

Improved membrane and electrode assemblies for proton exchange membrane fuel cells

665

Improved membrane fluidity of ionic polysaccharide bead-supported phospholipid bilayer membrane systems

666

Improved membrane structures for seawater desalination by studying the influence of sublayers Original Research Article

667

Improved merit order and augmented Lagrange Hopfield network for short term hydrothermal scheduling

668

Improved merit order and augmented Lagrange Hopfield network for unit commitment

669

Improved metabolic control reduces the number of postprandial apolipoprotein B-48-containing particles in Type 2 diabetes

670

Improved metal affinity of chelating adsorbents through graft polymerization

671

Improved metal cutting performance with bias-modulated textured Ti0.50Al0.50N multilayers

672

Improved Metal-Support Interaction in Pt/CeO2/SiO2 Catalysts after Zinc Addition

673

Improved metastability bounds on the Standard Model Higgs mass

674

Improved methane dehydrocondensation reaction on HMCM-22 and HZSM-5 supported rhenium and molybdenum catalysts Original Research Article

675

Improved methane fermentation of chicken manure via ammonia removal by biogas recycle

676

Improved methane storage capacities by sorption on wet active carbons Original Research Article

677

Improved methanol oxidation activity and stability of well-mixed PtRu catalysts synthesized by electroless plating method with addition of chelate ligands Original Research Article

678

Improved method “grid translation” for mapping environmental pollutants using a two-dimensional CAT scanning system

679

Improved method for absolute thermal contrast evaluation using Source Distribution Image (SDI)

680

Improved Method for Analysis of Airborne Asbestos Fibers Using Phase Contrast Microscopy and FTIR Spectrometry

681

Improved method for analyzing estrogens in water by liquid chromatography–electrospray mass spectrometry

682

Improved method for assaying maize plant resistance to maize rough dwarf disease by artificial inoculation and real-time RT-PCR

683

Improved method for carbohydrate-deficient transferrin determination in human serum by capillary zone electrophoresis

684

Improved method for comparing abundance data for soil zoological field studies

685

Improved Method for Detecting Fluorescent-Labeled Glycoprotein on Sodium Dodecyl Sulfate–Polyacrylamide Gel

686

Improved method for detecting the effect of gluinos in four-jet events at LEP

687

Improved method for detecting the effect of gluinos in four-jet events at LEP

688

Improved Method for Determining Food Protein Degree of Hydrolysis

689

Improved method for determining inversion layer mobility of electrons in trench MOSFETs

690

Improved Method for Direct Coronary Grafting Without CPB via Anterolateral Small Thoracotomy

691

Improved method for direct DNA sequencing of the human lipoprotein lipase gene using an auto DNA sequencer

692

Improved Method for Direct Haplotyping at the Vitamin D Receptor Gene Locus

693

Improved method for direct high-performance liquid chromatography assay of angiotensin-converting enzyme-catalyzed reactions

694

Improved method for evaluating antenna performance in mobile environment with consideration of polarization and phase

695

Improved method for extraction of aroma compounds in aged brandies and aqueous alcoholic wood extracts using ultrasound

696

Improved method for extraction of aroma compounds in aged brandies and aqueous alcoholic wood extracts using ultrasound Original Research Article

697

Improved method for fatty acid analysis in herbage based on direct transesterification followed by solid-phase extraction

698

Improved method for HgI2 crystal growth and detector fabrication

699

Improved method for HgI2 crystal growth and detector fabrication

700

Improved method for identifying and quantifying olive oil phenolic compounds and their metabolites in human plasma by microelution solid-phase extraction plate and liquid chromatography–tandem mass spectrometry

701

Improved method for kinetic parameters estimation of non-isothermal reaction: Application to residuum thermolysis

702

Improved method for measurement of human plasma xanthine oxidoreductase activity

703

Improved method for measuring the first-order hyperpolarizability of organic NLO materials in solution by using the hyper-Rayleigh scattering technique

704

Improved Method for Measuring Wheat Flour Dough Pressure-Sensitive Adhesiveness.

705

Improved method for optimum choice of free parameter in orthogonal approximations

706

Improved method for plasma malondialdehyde measurement by high-performance liquid chromatography using methyl malondialdehyde as an internal standard

707

Improved method for prediction of heavy metal recoveries from soil using high intensity magnetic separation (HIMS)

708

Improved method for prediction of rain attenuation in terrestrial links

709

Improved method for preparation of anhydrous silica by microwave irradiation with spectroscopic characterization and toxicity assay

710

Improved method for rapid determination of vitamin A in small samples of breast milk by high-performance liquid chromatography

711

Improved method for reliable predicting enthalpy of fusion of energetic compounds

712

IMPROVED METHOD FOR SELECTING SCALE FACTORS AND MODEL MATERIALS FOR SCALE MODELLING OF OUTDOOR SOUND PROPAGATION

713

Improved method for severe thermal shocks testing of ceramics by water quenching

714

Improved method for shipboard determination of iron in seawater by flow injection analysis Original Research Article

715

Improved method for simultaneous determination of l-arginine and its mono- and dimethylated metabolites in biological samples by high-performance liquid chromatography

716

Improved method for the conversion of pinacolboronic esters into trifluoroborate salts: facile synthesis of chiral secondary and tertiary trifluoroborates

717

Improved method for the determination of biogenic amines and polyamines in vegetable products by ion-pair high-performance liquid chromatography

718

Improved method for the determination of cyclic guanosine monophosphate (cGMP) in human plasma by LC–MS/MS

719

Improved Method for the Determination of Cypermethrin in Sarawak Soils

720

Improved method for the determination of kynurenic acid in rat plasma by column-switching HPLC with post-column fluorescence detection Original Research Article

721

Improved method for the determination of trace perchlorate in ground and drinking waters by ion chromatography

722

Improved method for the determination of zinc pyrithione in environmental water samples incorporating on-line extraction and preconcentration coupled with liquid chromatography atmospheric pressure chemical ionisation mass spectrometry

723

Improved method for the immunological detection of malondialdehyde-modified low-density lipoproteins in human serum

724

Improved method for the immunological detection of malondialdehyde-modified low-density lipoproteins in human serum Original Research Article

725

Improved method for the in vitro assessment of antioxidant activity of plant extracts by headspace solid-phase microextraction and gas chromatography–electron capture detection

726

Improved method for the measurement of large neutral amino acids in biological matrices

727

Improved method for the routine determination of acetylcholine and choline in brain microdialysate using a horseradish peroxidase column as the immobilized enzyme reactor

728

Improved method for the simultaneous determination of aflatoxins, ochratoxin A and Fusarium toxins in cereals and derived products by liquid chromatography–tandem mass spectrometry after multi-toxin immunoaffinity clean up

729

Improved method for the simultaneous determination of whey proteins, caseins and para-κ-casein in milk and dairy products by capillary electrophoresis

730

Improved method for the synthesis of (E)-cyclic-β-alkoxyacrylates under mild conditions

731

Improved method generating a free-form surface using integral equations Original Research Article

732

Improved method of an unusual conversion of aliphatic amines into alcohols

733

Improved method of bench solarization for the control of soilborne diseases in basil

734

Improved method of estimating deflection in prestressed steel I-beams

735

Improved method of estimating deflection in prestressed steel I-beams

736

Improved method of making soil monoliths using an acrylic bonding agent and proline auger

737

Improved method of measurement for tritiated water standardization by internal gas proportional counting

738

Improved method of sea level forecasting at Venice (Northern Adriatic Sea)

739

Improved method of the MALDI-TOF analysis of DNA with nanodot sample target plate

740

Improved method to demonstrate the structural integrity of high density fuel storage racks

741

Improved method to demonstrate the structural integrity of high density fuel storage racks Original Research Article

742

Improved Method to Increase AES System Speed

743

Improved method to measure aldehyde adducts to N-terminal valine in hemoglobin using 5-hydroxymethylfurfural and 2,5-furandialdehyde as model compounds

744

Improved method to quantitatively determine powerful odorant volatile thiols in wine by headspace solid-phase microextraction after derivatization

745

Improved methodologies for simulating unitary air conditioners at off-design conditions

746

Improved methodologies for synthesis of prenylated xanthones by microwave irradiation and combination of heterogeneous catalysis (K10 clay) with microwave irradiation

747

Improved methodologies for the calculation of critical eigenvalues in small signal stability analysis

748

Improved methodologies for the design of maneuver for stability and control simulations

749

Improved methodology for endurance time analysis: From time to seismic hazard return period

750

Improved methodology for generation of axial flux shapes in digital core protection systems

751

Improved methodology for the characterisation of transgenic Bt-11 maize cultivars using RP-HPLC profiles of albumin, globulin, prolamin, and glutelin protein fractions and chemometric analysis

752

Improved Methods for Approximating Node Weighted Steiner Trees and Connected Dominating Sets

753

Improved methods for bandwidth selection when estimating ROC curves

754

Improved methods for determination of rotational symmetries in macromolecules

755

Improved methods for determination of rotational symmetries in macromolecules

756

Improved methods for determining the concentration of 6-thioguanine nucleotides and 6-methylmercaptopurine nucleotides in blood

757

Improved methods for divisible load distribution on k-dimensional meshes using pipelined communications

758

Improved methods for elemental analysis of atmospheric aerosols for evaluating human health impacts of aerosols in East Asia

759

Improved methods for isolating and validating indigenous biomarkers in Precambrian rocks

760

Improved methods for mapped grids: Applied to highly excited vibrational states of diatomic molecules

761

Improved methods for selective dissolution of Mn oxides: applications for studying trace element associations

762

Improved methods for the extraction and analysis of isoflavones from soy-containing foods and nutritional supplements by reversed-phase high-performance liquid chromatography and liquid chromatography–mass spectrometry

763

Improved methods for the stereoselective synthesis of mannoheptosyl donors and their glycosides: toward the synthesis of the trisaccharide repeating unit of the Campylobacter jejuni RM1221 capsular polysaccharide

764

Improved methods for the synthesis and isolation of imidazolium based ionic salts

765

Improved methods for urinary atrazine mercapturate analysis—Assessment of an enzyme-linked immunosorbent assay (ELISA) and a novel liquid chromatography–mass spectrometry (LC–MS) method utilizing online solid phase extraction (SPE) Original Research Artic

766

Improved methods of assembly sequence determination for automatic assembly systems

767

Improved methods of measurement and analysis of conversion electron and β-particle spectra

768

Improved MEUF removal of naphthenic acids from produced water

769

Improved microcrystalline silicon TFTs

770

Improved micro-flame detection method for gas chromatography

771

Improved micro-flame detection method for gas chromatography Original Research Article

772

Improved microfluidic chip-based sequential-injection trapped-droplet array liquid–liquid extraction system for determination of aluminium

773

Improved microhardness and wear resistance of the as-deposited electroless Ni–P coating

774

Improved micromachined column design and fluidic interconnects for programmed high-temperature gas chromatography separations

775

Improved microstructural features in screen printed NdBCO thick films on YSZ substrates

776

Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming

777

Improved microstructure of cement-based composites through the addition of rock wool particles

778

Improved microwave dielectric properties of B2O3-doped Nd(Co1/2Ti1/2)O3 ceramics with near zero temperature coefficient of resonant frequency

779

Improved microwave dielectric properties of Nd(Mg0.5Sn0.5)O3 ceramics by substituting Mg2+ with Zn2+

780

Improved microwave digestion procedure for inductively coupled plasma mass spectrometric determinations of inorganic bromide residues in foodstuffs fumigated with methyl bromide

781

Improved microwave digestion procedure for inductively coupled plasma mass spectrometric determinations of inorganic bromide residues in foodstuffs fumigated with methyl bromide Original Research Article

782

Improved microwave steam distillation apparatus for isolation of essential oils: Comparison with conventional steam distillation

783

Improved microwave-assisted wet digestion procedures for accurate Se determination in fish and shellfish by flow injection-hydride generation-atomic absorption spectrometry Original Research Article

784

Improved milk fouling simulation in a helical triple tube heat exchanger

785

Improved MILP models for two-machine flowshop with batch processing machines

786

Improved minima-hopping. TIP4P water clusters, with

787

Improved minimal augmentation procedure for the direct computation of critical points Original Research Article

788

Improved minimax estimation of powers of the variance of a multivariate normal distribution under the entropy loss function

789

IMPROVED MIRROR SOURCE METHOD IN ROOMACOUSTICS

790

Improved mixed model for longitudinal data analysis using shrinkage method

791

Improved MLPG_R method for simulating 2D interaction between violent waves and elastic structures

792

Improved mobility of the copper phthalocyanine thin-film transistor

793

Improved modal characterization of the constitutive parameters in multilayered plates

794

Improved Mode II delamination fracture toughness of composite materials by selective placement of protein-surface treated CNT

795

Improved model for calculating the coefficient of performance of a Peltier module

796

Improved model for improving the inter-instrument agreement of spectrocolorimeters Original Research Article

797

Improved model for mercury emission, transport and deposition

798

Improved model for plate-end shear of CFRP strengthened RC beams

799

Improved model for real-time substructuring testing system

800

Improved model for solute transport in heterogeneous porous media

801

Improved model for the analysis of air fluorescence induced by electrons

802

Improved model for the analysis of air fluorescence induced by electrons

803

Improved model for the analysis of back corona in pulse energised electrostatic precipitators

804

Improved model of a ball bearing for the simulation of vibration signals due to faults during run-up

805

Improved model of multicomponent adsorption in reversed-phase liquid chromatography

806

Improved model prediction and RMPC design for LPV systems with bounded parameter changes

807

Improved model reduction and tuning of fractional-order controllers for analytical rule extraction with genetic programming

808

Improved model selection criteria for SETAR time series models

809

Improved model to determine turbine and compressor boundary conditions with the method of characteristics

810

Improved model to determine turbine and compressor boundary conditions with the method of characteristics

811

Improved modeling and solution methods for the multi-resource routing problem

812

Improved modeling by coupling imperfect models

813

Improved Modeling Capabilites with Reduced-Order Integration

814

Improved modeling of chamber transport for heavy-ion fusion

815

Improved modeling of chamber transport for heavy-ion fusion

816

Improved modeling of chamber transport for heavy-ion fusion

817

Improved modeling of clinical data with kernel methods

818

Improved modeling of flows down inclined planes

819

Improved modeling of microchannel plate response to hard X-rays

820

Improved modeling of microchannel plate response to hard X-rays

821

Improved Modeling of Side-Chain–Base Interactions and Plasticity in Protein–DNA Interface Design

822

Improved modeling of the effect of R-ratio on crack growth rate

823

Improved modelling of detachment and neutral-dominated regimes using the SOLPS B2–Eirene code

824

Improved modelling of downburst outflows for wind engineering applications using a cooling source approach

825

Improved modelling of ship SO2 emissions—a fuel-based approach

826

Improved modelling of the loading spectra using a mixture model approach

827

Improved modelling of the Messinian Salinity Crisis and conceptual implications

828

Improved modelling of the neutron spectrum for the ASP accelerator

829

Improved modelling of vapour-liquid equilibria up to the critical region. Application to the CO2CH4N2 system

830

Improved model-order reduction by using spacial information in moments

831

Improved models for fractal colloidal agglomeration: computationally efficient algorithms

832

Improved models for the prediction of activity coefficients in nearly athermal mixtures Part II. A theoretically-based GE-model based on the van der Waals partition function

833

Improved models of the piezomagnetic field for the 2011 Mw 9.0 Tohoku-oki earthquake

834

Improved models to predict gas–water relative permeability in fractures and porous media

835

Improved modification direction methods

836

Improved modification of the single-switch AC-AC converter for induction heating applications

837

Improved modular synthesis of thieno[3,2-b]pyrroles and thieno[2,3-b]pyrroles

838

Improved modules for the blanket of RTO/RC ITER

839

Improved moisture resistance of SrS:Eu2+ phosphors with nanoscale SiO2 coating

840

Improved moisture resistance of SrSO4:Sm3+ phosphors coated with SiO2

841

Improved molten carbonate fuel cell performance via reinforced thin anode

842

Improved molten salt synthesis (MSS) for SnO2 nanorods and nanotwins

843

Improved moment estimates for invariant measures of semilinear diffusions in Hilbert spaces and applications

844

Improved Moment Strength Prediction of Composite Steel Plate Girders in Positive Bending

845

Improved monitoring of batch processes by incorporating external information

846

Improved monitoring of HABs using autonomous underwater vehicles (AUV)

847

Improved monitoring of surface ozone by joint assimilation of geostationary satellite observations of ozone and CO

848

Improved monitoring of vegetation dynamics at very high latitudes: A new method using MODIS NDVI

849

Improved monochromatic loose cycle partitions in hypergraphs

850

Improved monodispersity of size selected aerosol particles with a new charging and selection scheme for tandem DMA setup

851

Improved Montgomery modular inverse algorithm

852

Improved mood states with lamotrigine in patients with epilepsy

853

Improved Morphological Method in Motion Detection

854

Improved Morphological, Structural, and Optical Features of ErxCuNiO3 {x= 0, 0.5, 0.7, 0.9}

855

Improved morphology of plated lithium in poly(vinylidene fluoride) based electrolyte

856

Improved motion information-based infrared dim target tracking algorithms

857

Improved mould-level control in a continuous steel casting line

858

Improved MPEG-4 still texture image coding under noisy environment

859

Improved MR image reconstruction from sparsely sampled scans based on neural networks

860

Improved MR imaging for patients with metallic implants☆

861

Improved multi-ant-colony algorithm for solving multi-objective vehicle routing problems

862

Improved Multibody Dynamics for Investigating Energy Dissipation in Train Collisions Based on Scaling Laws

863

Improved multi-camera smart tra system for resilient citiesc surveillance

864

Improved Multicomponent Multiphase Lattice Boltzmann Model for Physical Foaming Simulation

865

Improved multi-level electronic structure methods (MLSEn + d) for atomization energies and reaction energy barriers

866

Improved multi-level Newton solvers for fully coupled multi-physics problems

867

Improved multilevel security with latent semantic indexing

868

Improved Multi-Mode anomalous transport module for tokamak plasmas Original Research Article

869

Improved multiple test procedures for discrete distributions: New ideas and analytical review

870

Improved multiquadric approximation for partial differential equations

871

Improved multiquadric method for elliptic partial differential equations via PDE collocation on the boundary

872

Improved multislice calculations for including higher-order Laue zones effects

873

Improved multislice calculations for including higher-order Laue zones effects

874

Improved multitasking following prefrontal tDCS

875

Improved multivariable quantitative feedback design for tracking error specifications

876

Improved Multivariate Prediction in a General Linear Model with an Unknown Error Covariance Matrix

877

Improved Multivariate Prediction under a General Linear Model

878

Improved Mutasynthetic Approaches for the Production of Modified Aminocoumarin Antibiotics Original Research Article

879

Improved MVT pruning method for MC-EZBC

880

Improved myocardial contrast with second harmonic transient ultrasound response imaging in humans using intravenous perfluorocarbon-exposed sonicated dextrose albumin

881

Improved myocardial ischemia/reperfusion injury in mice lacking tumor necrosis factor-α

882

Improved myocardial performance during repetitive exercise testing: The role of extracellular superoxide dismutase activity in a model of exercise-induced myocardial preconditioning

883

Improved Myocardial Tolerance to Ischaemia in the Diabetic Rabbit

884

Improved N2 fixation in 2,4-D treated wheat roots associated with Azospirillum lipoferum: Studies of colonization using reporter genes

885

Improved N2 fixation in 2,4-D treated wheat roots associated with Azospirillum lipoferum: Studies of colonization using reporter genes

886

Improved NARP-HPLC method for separating triglycerides of palm olein and its solid fractions obtained at low temperature storage

887

Improved NARX-ANFIS Network structure with Genetic Algorithm to optimizing Cash Flow of ATM Model

888

Improved native UV laser induced fluorescence detection for single cell analysis in poly(dimethylsiloxane) microfluidic devices

889

Improved n-butanol production by solvent tolerant Clostridium beijerinckii

890

Improved near surface characterization of shallow arsenic distribution by SIMS depth profiling

891

Improved near surface soil characterizations using a multilayer soil resistivity model

892

Improved near-infrared methane band models and k-distribution parameters from 2000 to 9500 cm−1 and implications for interpretation of outer planet spectra

893

Improved near-term Earth rotation predictions using atmospheric angular momentum analysis and forecasts

894

Improved neighbor detection algorithm for AODV routing protocol

895

Improved neighbor list algorithm in molecular simulations using cell decomposition and data sorting method Original Research Article

896

Improved network resilience of wireless mesh networks using MPLS and Fast Re-Routing techniques

897

Improved Neural Network and the Pontryagin s minimum Principle for Solve Fuzzy Optimal Control ‎Problems‎

898

Improved neural-aided sliding mode controller for autolanding under actuator failures and severe winds

899

Improved neural-network model predicts dewpoint pressure of retrograde gases

900

Improved neurohormonal markers of ventricular function after restoring sinus rhythm by the Maze procedure

901

Improved neuromagnetic detection of fetal and neonatal auditory evoked responses

902

Improved neuron MOS-transistor structures for integrated neural network circuits

903

Improved new qualitative results on stochastic delay differential equations of second order

904

Improved Newton method for optimal power flow problem

905

Improved Newton’s method with exact line searches to solve quadratic matrix equation

906

Improved Newton’s method without direct function evaluations

907

Improved NH3, C2H5OH, and CH3COCH3 sensing properties of SnO2 nanofibers by adding block copolymer P123

908

Improved Nickel-Catalyzed Cross-Coupling Reaction Conditions between ortho-Substituted Aryl Iodides/Nonaflates and Alkylzinc Iodides in Solution and in the Solid-Phase

909

Improved Nitrations Using Metal Nitrate–Sulfuric Acid Systems

910

Improved NMR chemical shifts in density functional theory

911

Improved noble gas polarization production for porous and granular media studies using narrowed-line VBG laser sources

912

Improved nodal expansion method for solving neutron diffusion equation in cylindrical geometry Original Research Article

913

Improved Noise Reduction in Audio Signals Using Spectral Resolution Enhancement With Time-Domain Signal Extrapolation

914

Improved Noninvasive Assessment of Coronary Artery Bypass Grafts With 64-Slice Computed Tomographic Angiography in an Unselected Patient Population Original Research Article

915

Improved nonisotopic PCR-SSCP for screening of p53 mutations

916

Improved non-linear behaviour of ZnO-based varistor thick films prepared by tape casting and screen printing

917

Improved Nonlinear Equation Method for Numerical Prediction of Jominy End-Quench Curves Original Research Article

918

IMPROVED NONLINEAR HETEROGENEOUS MODEL FOR WASTEWATER TREATMENT

919

Improved nonlinear plastic hinge analysis of space frame structures

920

Improved Nonnegative Estimation of Variance Components in Balanced Multivariate Mixed Models

921

Improved normal-phase and reversed-phase gradient high-performance liquid chromatography procedures for the analysis of retinoids and carotenoids in human serum, plant and animal tissues

922

Improved NOx reduction over the staged Ag/Al2O3 catalyst system Original Research Article

923

Improved NSGA-II Multi-objective Genetic Algorithm Based on Hybridization-encouraged Mechanism

924

Improved n-Si/oxide junctions for environmentally safe solar energy conversion

925

Improved null-collision technique in the direct simulation Monte Carlo method: Application to vibrational relaxation of nitrogen

926

Improved numerical evaluation of the radial groundwater flow equation

927

Improved numerical integration for locking treatment in isogeometric structural elements, Part I: Beams

928

Improved numerical method for the Traction Boundary Integral Equation by application of Stokesʹ theorem

929

Improved numerical prediction of ash formation and deposition using a novel developed char fragmentation model

930

Improved numerical simulation of aerosol deposition in an idealized mouth–throat

931

Improved numerical simulations of incompressible flows based on viscous/inviscid interaction procedures

932

Improved numerical solver for Kansaʹs method based on affine space decomposition

933

IMPROVED NUTRIENT INTAKE IN OLDER OBESE ADULTS UNDERGOING A STRUCTURED DIET AND EXERCISE INTENTIONAL WEIGHT LOSS PROGRAM

934

Improved O2 sensing performance by modifying P–P ligand in [Cu(N–N)(P–P)] complex

935

Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics

936

Improved o-chlorobenzoylformate bioreduction by stabilizing aldo-keto reductase YtbE with additives

937

Improved Ocular Bioavailability of Moxifloxacin HCl using PLGA Nanoparticles: Fabrication, Characterization, In-vitro and In-vivo Evaluation

938

Improved Odor Sensitivity in Attention-Deficit/Hyperactivity Disorder

939

Improved of color properties on Sardinella lemuru oil during adsorbent refining using magnesol xl

940

Improved oil recovery by adsorption–desorption in chemical flooding

941

IMPROVED OIL RECOVERY BY APPLICATION OF ULTRASONIC STIMULATED WATERFLOODING

942

Improved oil recovery by application of vibro-energy to waterflooded sandstones

943

Improved oil recovery using alkaline solutions in limestone medium

944

Improved one-band self-consistent effective mass methods for hole quantization in pMOSFET

945

Improved one-delayed-group neutron kinetic model for small reactivity states

946

Improved open circuit voltage of the photovoltaic device using ferrocene as a donor material

947

Improved open-circuit voltage and efficiency in organic solar cells using a phosphine oxide based interlayer material

948

Improved operating lifetime of phosphorescent OLED by novel anode coating

949

Improved operation of power transformer protection using artificial neural network

950

Improved operational efficiency through elimination of waste and redundancy

951

Improved operations through manpower management in the oil sector

952

Improved optical and structural properties of ZnO thin films by rapid thermal annealing

953

Improved optical limiting in dispersible carbon nanotubes and their metal oxide hybrids Original Research Article

954

IMPROVED OPTICAL PROBE FOR MEASURING PHYTOPLANKTON SUSPENSION CONCENTRATIONS BASED ON OPTICAL FLUORESENSCE AND ABSORPTION

955

Improved optical properties of CdS quantum dots by ligand exchange

956

Improved optical response and photocatalysis for N-doped titanium oxide (TiO2) films prepared by oxidation of TiN

957

Improved optical transmittance of Al-doped ZnO thin films by use of ZnO nanorods

958

Improved optimality checkpoint for decision making by using the sub-triangular form

959

Improved optimisation approach to the robust H/sub 2//H/sub /spl infin// control problem for linear systems

960

Improved optimisation method using genetic algorithms for mass transit signalling block-layout design

961

Improved optimisation of excitation sequences in speech and audio coders

962

Improved optimization of polycyclic aromatic hydrocarbons (PAHs) mixtures resolution in reversed-phase high-performance liquid chromatography by using factorial design and response surface methodology

963

Improved optimization of soft-partition-weighted-sum filters and their application to image restoration

964

Improved Optimization Process for Nonlinear Model Predictive Control of PMSM

965

Improved optimization strategies for autofocusing motion compensation in MRI via the analysis of image metric maps

966

Improved Optimization Strategies for Generating Practical Water-Usage and -Treatment Network Structures

967

Improved OR education through the use of spreadsheet models

968

Improved oral bioavailability of core–shell structured beads by redispersion of the shell-forming nanoparticles: Preparation, characterization and in vivo studies

969

Improved oral delivery of clonazepam through liquisolid powder compact formulations: In-vitro and ex-vivo characterization

970

Improved oral delivery of valsartan from maltodextrin based proniosome powders

971

Improved orbit predictions using two-line elements Original Research Article

972

Improved orbital parameters of accreting millisecond pulsar SAX J1808.4-3658 Original Research Article

973

Improved organic optocouplers based on a deep blue fluorescent OLED and an optimized bilayer heterojunction photosensor

974

Improved orientation estimation for texture planes using multiple vanishing points

975

Improved orthodontic stainless steel wires coated with inorganic fullerene-like nanoparticles of WS2 impregnated in electroless nickel–phosphorous film

976

Improved orthogonal array based simulated annealing for design optimization

977

Improved orthokinetic coagulation model for fractal colloids: Aggregation and breakup

978

Improved oscillator strengths and wavelengths for Os I and Ir I, and new results on early r-process nucleosynthesis

979

Improved osseointegration in ion implantation-treated dental implants

980

Improved osteoblast cell affinity on plasma-modified 3-D extruded PCL scaffolds

981

Improved osteogenic differentiation of human marrow stromal cells cultured on ion-induced chemically structured poly-ε-caprolactone

982

Improved outcome after acute coronary syndromes with an intensive versus standard lipid-lowering regimen: results from the Pravastatin or Atorvastatin Evaluation and Infection Therapy–Thrombolysis in Myocardial Infarction 22 (PROVE IT–TIMI 22) trial

983

Improved outcome by identification of high-risk nonocclusive mesenteric ischemia, aggressive reexploration, and delayed anastomosis

984

Improved outcome for children with acute lymphoblastic leukemia after risk-adjusted intensive therapy : A single-institution experience

985

Improved outcome of children with acute myeloid leukemia treated on 2 consecutive protocols

986

Improved outcome with organs from carbon monoxide poisoned donors for intrathoracic transplantation

987

Improved Outcomes After Aortic Valve Surgery for Chronic Aortic Regurgitation With Severe Left Ventricular Dysfunction Original Research Article

988

Improved Outcomes for Cardiac Arrest in Children: Share the Baton With the Bystander

989

Improved outcomes for women undergoing contemporary percutaneous coronary intervention: A report from the national heart, lung, and blood institute dynamic registry

990

Improved outcomes in patients with acute allergic syndromes who are treated with combined H1 and H2 antagonists

991

Improved outcomes in peripartum cardiomyopathy with contemporary

992

Improved Outcomes of Pediatric Dilated Cardiomyopathy and Heart Transplantation

993

Improved outcomes of pediatric dilated cardiomyopathy with utilization of heart transplantation Original Research Article

994

Improved outcomes with an implantable left ventricular assist system: a multicenter study

995

Improved outcomes with early vocal fold medialization for vocal fold paralysis after thoracic surgery

996

Improved outcomes with the Prolene Hernia System mesh compared with the time-honored Lichtenstein onlay mesh repair for inguinal hernia repair

997

Improved outcoupling of light in organic light emitting devices, utilizing a holographic DFB-structure

998

Improved Overshoot Estimation in Pole Placements and Its Application in Observer-Based Stabilization for Switched Systems

999

Improved oxidation resistance of a nanocrystalline chromite-coated ferritic stainless steel

1000

Improved oxidation resistance of conducting polychloroprene composites

بازگشت