ليست عنوان مقالات لاتين Application of spatial multi-criteria analysis to site selection for a local park: A case study in the Bergamo Province, Italy Application of the Leray–Schauder alternative to nonlinear singular operator equations Original Research Article

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Application of spatial multi-criteria analysis to site selection for a local park: A case study in the Bergamo Province, Italy

2

Application of Spatial Structures in Bridges Deck

3

Application of Spatio-temporal Model to Estimate Burden of Diseases, Injuries and Risk Factors in Iran 1990 – 2013

4

Application of sPC-SAFT and group contribution sPC-SAFT to polymer systems—Capabilities and limitations

5

Application of SPCTRAL2 parametric model in estimating spectral solar irradiances over polluted Athens atmosphere

6

Application of special finite elements for determination of the parameters of fracture mechanics of nonlinear elastomers with cracks

7

Application of Special Granular Structures for semi-active damping of lateral beam vibrations

8

Application of species-specific PCR for the identification of dried bonito product (Katsuobushi)

9

Application of species-specific polymerase chain reaction assays to verify the labeling of quail (Coturnix coturnix), pheasant (Phasianus colchicus) and ostrich (Struthio camelus) in pet foods

10

Application of specific exergy to macrophytes as an integrated index of environmental quality for coastal lagoons

11

Application of Specific Monoclonal Antibodies for Characterization of Leishmania spp. Promastigotes Using Indirect Immunofluorescent and Immunoperoxidase Tests

12

Application of Specific Primers and Polymerase Chain Reaction for Identification of Ralstonia Solanacearum Biovar2

13

Application of Spectral Analysis in Mapping Hydrothermal Alteration of the Northwestern Part of the Kerman Cenozoic Magmatic Arc, Iran

14

Application of spectral analysis of daily water level and spring discharge hydrographs data for comparing physical characteristics of karstic aquifers

15

Application of Spectral Analysis of Surface Waves (SASW) Method: Rock Mass Characterization

16

Application of spectral analysis to meteorological and soil solution chemistry data

17

Application of spectral beam finite element with a crack and iterative search technique for damage detection

18

Application of spectral collocation method to a class of nonlinear PDEs

19

Application of Spectral Computed Tomography (CT) Combined with Conventional CT Features in Differentiating Malignant Pulmonary Mass-Like Lesions

20

Application of spectral conjugate gradient methods for solving unconstrained optimization problems

21

Application of spectral decomposition algorithm for mapping water quality in a turbid lake (Lake Kasumigaura, Japan) from Landsat TM data

22

Application of spectral decomposition analysis to in vivo quantification of aluminum by neutron activation analysis

23

Application of spectral decomposition of Greenʹs function to linear inverse problem

24

Application of spectral fluorescence microscopy for the characterization of Athabasca bitumen vacuum bottoms

25

Application of spectral forcing in lattice-Boltzmann simulations of homogeneous turbulence

26

Application of spectral karyotyping to the analysis of the human chromosome complement of interspecies somatic cell hybrids

27

Application of spectral libraries for high-performance liquid chromatography–atmospheric pressure ionisation mass spectrometry to the analysis of pesticide and explosive residues in environmental samples

28

Application of spectral methods for high-frequency financial data to quantifying states of market participants

29

Application of Spectral Mixture Analysis and Image Fusion Techniques for Image Sharpening

30

Application of spectral reflectance to the monitoring of ZnO nanorod growth

31

Application of Spectral Signatures and Colour Ratios to Estimate Chlorophyll in Singaporeʹs Coastal Waters

32

Application of spectrally resolved scanning photoluminescence to assess relaxation processes of InGaAs and InAlAs layers strained in compression and tension

33

Application of spectrally resolved scanning photoluminescence to assess relaxation processes of InGaAs and InAlAs layers strained in compression and tension

34

Application of spectrofluorimetric techniques to the study of marine mucilages in the Adriatic Sea: preliminary results

35

Application of spectrometric nuclear borehole logging for reserves estimation and mine planning at Callide coalfields open-cut mine

36

Application of spectroscopic ellipsometry to probe the environmental and photo-oxidative degradation of poly(p-phenylenevinylene) (PPV)

37

Application of spectroscopic ellipsometry to the investigation of the optical properties of cobalt-nanostructured silica thin layers

38

Application of spectroscopic method to predict sugar content of sugarcane internodes

39

Application of spectroscopic photoemission and low energy electron microscope to high-k gate dielectrics: Relationship between surface morphology and electronic states during Hf-silicide formation

40

Application of spectroscopic techniques for the identification of organic and inorganic constituents of salvadora persica from Saudi Arabia

41

Application of spectroscopic techniques for the study of paper documents: A survey

42

Application of spectroscopic techniques for the study of paper documents: A survey

43

Application of spectroscopic techniques to the study of illuminated manuscripts: A survey

44

Application of spectroscopic techniques to the study of illuminated manuscripts: A survey

45

Application of spectroscopy in herbal metabolomics

46

Application of spectrum-volume fractal modeling for detection of mineralized zones

47

Application of Speed estimation Techniques for Induction Motor Drives and Electric Traction industries and vehicle

48

Application of spent Agaricus subrufescens compost in integrated production of seedlings and plants of tomato

49

Application of spent grains to increase porosity in bricks

50

Application of spherical and cylindrical wrapping algorithms in a musculoskeletal model of the upper limb

51

Application of spherical harmonics derived space rotation invariant indices to the analysis of multiple sclerosis lesionsʹ geometry by MRI

52

Application of Spherical Mesoporous Silica MCM-41 for Adsorption of Dibenzothiophene (A Sulfur Containing Compound) from Model Oil

53

Application of Spherical Statistics to Change Vector Analysis of Landsat Data: Southern Appalachian Spruce–Fir Forests

54

Application of spherical subset simulation method and auxiliary domain method on a benchmark reliability study

55

Application of SPI for Modeling energy consumption in Sarcheshmeh SAG and ball mills

56

Application of SPICE simulation to study WDM and SCM systems using EDFAs with chirping

57

Application of spindle speed variation for chatter suppression in turning

58

Application of spline element for large-amplitude free vibrations of laminated orthotropic straight/curved beams

59

Application of spline to approximate the solution of singularly perturbed boundary-value problems

60

Application of spline wavelet self-convolution in processing capillary electrophoresis overlapped peaks with noise

61

Application of spline wavelet self-convolution in processing capillary electrophoresis overlapped peaks with noise Original Research Article

62

Application of SPR biosensor for medical diagnostics of human hepatitis B virus (hHBV)

63

Application of spray combustion simulation in DI diesel engine

64

Application of Sr isotopes in secondary silicate minerals to paleogroundwater hydrology: An example from K-metasomatized rocks in the western U.S.

65

Application of Sr isotopes to geochemical mapping and provenance analysis: The case of Aichi Prefecture, central Japan

66

Application of SRXRFM to geoscience

67

Application of Srβ-alumina solid electrolyte to a CO2 gas sensor

68

Application of SSH and a macroarray to investigate altered gene expression in Mytilus edulis in response to exposure to benzo[a]pyrene

69

Application of SSIIM numerical model in simulation of local scouring around the aerodynamic bridge pier located in 90 ° bend

70

Application of SSR Markers for Purity Testing of Commercial Hybrid Soybean (Glycine max L.)

71

Application of SSR markers in the construction of Australian barley genetic maps

72

Application of Stability Indicating HPLC Method for Quantitative Determination of Etoricoxib and Paracetamol in Pharmaceutical Dosage Form

73

Application of stabilized biosolids and fly ash mixtures as soil amendments and their impact on free living nematodes and carrot (Daucus carota) yield

74

Application of stable carbon isotope analysis to the detection of 17β-estradiol administration to cattle

75

Application of stable isotope analysis to quantify the retention of eroded carbon in grass filters at the North Appalachian experimental watersheds

76

Application of stable isotope dilution assays based on liquid chromatography–tandem mass spectrometry for the assessment of folate bioavailability

77

Application of Stacked Ensemble Techniques in Head and Neck Squamous Cell Carcinoma Prognostic Feature Subsets

78

Application of staggered undersampling to power quality monitoring

79

Application of standard addition methodology for the determination of banned azo dyes in different leather types Original Research Article

80

Application of standardized mistletoe extracts augment immune response and down regulates metastatic organ colonization in murine models

81

Application of standardized principal component analysis to land-cover characterization using multitemporal AVHRR data

82

Application of Starch Foams Containing Plant Essential Oils to Prevent Mold Growth and Improve Shelf Life of Packaged Bread

83

Application of STATCOMs to wind farms

84

Application of static analyses for state-space reduction to the microcontroller binary code

85

Application of static and dynamic liquid-phase microextraction in the determination of polycyclic aromatic hydrocarbons

86

Application of static headspace gas chromatography for determination of acetaldehyde in beer

87

Application of static headspace gas chromatography for determination of acetaldehyde in beer

88

Application of static liquid-phase microextraction to the analysis of organochlorine pesticides in water

89

Application of static microcoils and WURST pulses for solid-state ultra-wideline NMR spectroscopy of quadrupolar nuclei

90

Application of Static Pressure Change in Estimation of Elastic Parameters of Rabbit's Artery by Doppler Ultrasound

91

Application of static var system auxiliary controllers to improve the transient performance of series compensated long transmission lines

92

Application of statically indeterminate fracture mechanics, SIFM, to a circumferentially cracked cylinder problem

93

Application of statically indeterminate fracture mechanics, SIFM, to a circumferentially cracked cylinder problem Original Research Article

94

Application of statistical experimental design to the optimisation of microextraction by packed sorbent for the analysis of nonsteroidal anti-inflammatory drugs in human urine by ultra-high pressure liquid chromatography

95

Application of statistical experimental designs for the optimization of medium constituents for the production of citric acid from pineapple waste

96

Application of statistical experimental methods to optimize production of poly(γ-glutamic acid) by Bacillus licheniformis CCRC 12826

97

Application of statistical formulas to hydrodynamic torque converter modelling

98

Application of statistical information criteria for optimal fuzzy model construction

99

Application of statistical mechanics to collective motion in biology

100

Application of statistical mechanics to stochastic transport

101

Application of statistical mechanics to the analysis of various physical properties of elastomeric networks — a review

102

Application of statistical mechanics to the wetting of complex liquids

103

Application of statistical method for FBR plant transient computation

104

APPLICATION OF STATISTICAL METHODS IN ANALYSIS OF AGRICULTURE - CORRELATION AND REGRESSION ANALYSIS

105

Application of statistical models in proportioning lightweight self-consolidating concrete with expanded clay aggregates

106

Application of statistical moment method to thermodynamic quantities of metals and alloys

107

Application of statistical moment method to thermodynamic quantities of metals and alloys

108

Application of statistical physics formalism to the modeling of adsorption isotherms of ibuprofen on activated carbon

109

Application of statistical physics methods and conceptsto the study of science & technology systems

110

Application of statistical physics to heartbeat diagnosis

111

Application of statistical physics to impact fragmentation

112

Application of statistical physics to politics

113

Application of statistical physics to the Internet traffics

114

Application of statistical power analysis – How to determine the right sample size in human health, comfort and productivity research

115

Application of statistical process control, sampling, and validation for producing Listeria monocytogenes-free chicken leg quarters processed in steam followed by impingement cooking Original Research Article

116

Application of statistical quality control measures for near-surface geochemical petroleum exploration

117

Application of statistical techniques and artificial neural network to estimate force from sEMG signals

118

Application of statistically based experimental designs for the optimization of exo-polysaccharide production by Cordyceps militaris NG3

119

Application of statistically similar representative volume element in numerical simulations of crash box stamping

120

Application of statistics and machine learning for risk stratification of heritable cardiac arrhythmias

121

Application of Statistics to Evaluate Iranian Analytical Laboratories Proficiency: Case of Aflatoxins in Pistachio

122

Application of steady-state and dynamic modeling for the prediction of the BOD of an aerated lagoon at a pulp and paper mill: Part I. Linear approaches

123

Application of steady-state and dynamic modeling for the prediction of the BOD of an aerated lagoon at a pulp and paper mill: Part II. Nonlinear approaches

124

Application of Steam Enhanced Extraction method on BTEX contaminated soil in a Nigerian petroleum depot and Automobile workshop sites in Ilorin metropolis, Nigeria.

125

Application of steam explosion to the fractionation and rapid vapor-phase alkaline pulping of wheat straw

126

Application of steel fibers in beam–column joints of rigid-framed railway bridges to reduce longitudinal and shear rebars

127

Application of steel fibre concrete for underwater concrete slabs

128

Application of steel thin film electrical resistance sensor for in situ corrosion monitoring

129

Application of Stefan–Maxwell approach to azeotropic separation by membrane distillation

130

Application of stem cell markers in search for neoplastic germ cells in dysgenetic gonads, extragonadal tumours, and in semen of infertile men

131

Application of Stem Cell Technology for Treatment of Diabetes Mellitus: Ethical Considerations

132

Application of Stepwise Discriminant Analysis for the Identification of Salinity Sources of Groundwater

133

Application of step-wise gradient high-performance counter-current chromatography for rapid preparative separation and purification of diterpene components from Pseudolarix kaempferi Gordon

134

Application of stepwise gradients in counter-current chromatography: A rapid and economical strategy for the one-step separation of eight coumarins from Seseli resinosum

135

Application of stereo vision to the study of mixed-mode crack-tip deformations

136

Application of stereocontrolled aldol coupling to synthesis of segments of immunosuppressants FK-506 and rapamycin

137

Application of stereological methods to estimate post-mortem brain surface area using 3 T MRI

138

Application of stereology on microstructure of neodymium-doped yttrium aluminum garnet (Nd:YAG) transparent ceramics

139

Application of Stereology on Neodymium-Doped Yttrium Aluminum Garnet (Nd:YAG) Transparent Ceramics

140

Application of stereology to the statistical description of the spatial distribution of composition and other scalar properties in three dimensional space Original Research Article

141

Application of stereoscopic tracking velocimetry for experimental and numerical investigation of directional solidification

142

Application of Stereovision to the Mechanical Characterisation of Ceramic Refractories Reinforced with Metallic Fibres

143

Application of stir bar sorptive extraction in combination with column liquid chromatography for the determination of polycyclic aromatic hydrocarbons in water samples

144

Application of stir bar sorptive extraction in combination with column liquid chromatography for the determination of polycyclic aromatic hydrocarbons in water samples Original Research Article

145

Application of stir bar sorptive extraction to the determination of polycyclic aromatic hydrocarbons in aqueous samples

146

Application of Stirling cooler to food processing: Feasibility study on butter churning Original Research Article

147

Application of stochastic algorithms for parameter estimation in the liquid–liquid phase equilibrium modeling

148

Application of stochastic filtering for lifetime prediction

149

Application of stochastic filtering for lifetime prediction

150

Application of Stochastic Optimal Control, Game Theory and Information Fusion for Cyber Defense Modelling

151

Application of stochastic parameter optimization to the Sacramento Soil Moisture Accounting model

152

Application of stochastic programming for iron ore quality control

153

Application of Stochastic Programming to Determine Operating Reserves with Considering Wind and Load Uncertainties

154

Application of stochastic resonance in target detection in shallow-water reverberation

155

Application of Stochastic Simulation in Assessing Effect of Particle Morphology on Fracture Characteristics of Sandstone

156

Application of stochastic wave approach to the problem of backscattering from the surfaces of airless cosmic bodies

157

Application of stochastic weighted algorithms to a multidimensional silica particle model

158

Application of stop and play models to the representation of magnetic characteristics of silicon steel sheet

159

APPLICATION OF STORYTELLING ELEMENTS IN LEARNING TECHNIQUES OF ASPERGER SYNDROME CHILDREN

160

Application of strain echocardiography in valvular heart diseases

161

Application of strain gradient elasticity theory for buckling analysis of protein microtubules

162

Application of strain gradient plasticity theory to model Charpy impact energy of functionally graded steels

163

Application of strain gradient plasticity theory to model Charpy impact energy of functionally graded steels using modified stress–strain curve data

164

Application of strain rate potentials with multiple linear transformations to the description of polycrystal plasticity

165

Application of strain–time correspondence as a tool for structural analysis of acrylonitrile–butadiene copolymer nanocomposites with various organoclay loadings

166

Application of strand meshes to complex aerodynamic flow fields

167

Application of strategic fuzzy games to wage increase negotiation and decision problems

168

Application of strategic sample composition to the screening of anti-inflammatory drugs in water samples using solid-phase microextraction

169

Application of strategic sample composition to the screening of anti-inflammatory drugs in water samples using solid-phase microextraction Original Research Article

170

Application of strategies for sanitation management in wastewater treatment plants in order to control/reduce greenhouse gas emissions

171

Application of strength properties determined by nanoindentations to describe the material response in micro- and macro-indentation

172

Application of Stress Diffusers to Beam-to-Column Connection

173

Application of stress intensity to design of anisotropic/isotropic bi-materials with a wedge

174

Application of stripping voltammetry and microelectrodes in vitro biocompatibility and in vivo toxicity tests of AISI 316L corrosion products

175

Application of stripping voltammetry at a static mercury drop electrode for the determination of aluminium and iron in Portland cement

176

Application of Strong Fluctuation Theory to Microwave Emission from Dry Snow

177

Application of strontium doped calcium polyphosphate bioceramic as scaffolds for bone tissue engineering

178

Application of strontium isotopes to understanding the hydrology and paleohydrology of the Altiplano, Bolivia–Peru

179

Application of structural dynamic approach to estimate space variability of primary producers in shallow marine water

180

Application of structural dynamic approach to estimate space variability of primary producers in shallow marine water

181

Application of structural equation modeling to evaluate the intention of shippers to use Internet services in liner shipping

182

Application of Structural Equation Modeling to Scrutinize the Causes of Grape Losses in Production Chain

183

Application of Structural Equations Modeling to Assess Relationship among Emotional Intelligence, General Health and Occupational Accidents

184

Application of structure preserving energy margin sensitivity to determine the effectiveness of shunt and series FACTS devices

185

Application of structured singular value theory for robust stability and control analysis in multimachine power systems. II. Numerical simulations and results

186

Application of Structured Total Least Squares for System Identification and Model Reduction

187

APPLICATION OF STUB LOADED FOLDED STEPPED IMPEDANCE RESONATORS TO DUAL BAND FILTERS

188

Application of subcritical water liquefaction as pretreatment for supercritical water gasification system in domestic wastewater treatment plant

189

Application of subjective global assessment as a screening tool for malnutrition in surgical patients in Vietnam

190

Application of submerged hollow fiber membrane in membrane bioreactors: Filtration principles, operation, and membrane fouling Original Research Article

191

Application of submerged membrane bioreactor for aquaculture effluent reuse Original Research Article

192

Application of subset simulation in reliability estimation of underground pipelines

193

Application of subset simulation methods to reliability benchmark problems

194

Application of subspace projection approaches for reduced-order modeling of electromagnetic systems

195

Application of substituted 2-(trimethylsilyl)ethyl esters to suppress diketopiperazine formation

196

APPLICATION OF SUBSYSTEMS CHANGE RANKING METHODOLOGY IN AIRCRAFT REDESIGN PROCESS

197

Application of successive interference cancellation to the GPS pseudolite nearfar problem

198

Application of successive principles of repair to correct supravalvular aortic stenosis

199

Application of successive projections algorithm for variable selection to determine organic acids of plum vinegar

200

Application of sugar foam to a pyrite-contaminated soil

201

Application of sugaring-out extraction for the determination of sulfonamides in honey by high-performance liquid chromatography with fluorescence detection

202

Application of sulfate reduction for the biological conversion of anglesite (PbSO4) to galena (PbS)

203

Application of sulfonic acid functionalized MCM-41 materials—Selectivity changes in various probe reactions Original Research Article

204

Application of Sulfonic Acid Functionalized Nanoporous Silica (SBA-Pr-SO 3H) in the Green Strecker Reaction under Solvent Free Condition

205

Application of Sulfonic Acid Functionalized Nanoporous Silica (SBA-Pr-SO3H) in the Green One-pot Synthesis of Polyhydroacridine Libraries

206

Application of Sulfonic Acid Functionalized SBA-15 as a Nanoporous Acid Catalyst in Microwave Assisted Synthesis of 2-Aryl Benzoxazoles

207

Application of sulfur microparticles for solid-phase extraction of polycyclic aromatic hydrocarbons from sea water and wastewater samples Original Research Article

208

Application of Sulfur Nanoparticles as a Solid Phase Extraction Sorbent for the Preconcentration of Lead(II) and Palladium(II) in Environmental Samples Prior to Flame Atomic Absorption Spectrometry Determination

209

Application of sulfur ylide mediated epoxidations in the asymmetric synthesis of β-hydroxy-δ-lactones. Synthesis of a mevinic acid analogue and (+)-prelactone B

210

Application of sulfuric acid doped poly (m-aminophenol) as aliphatic alcohol vapor sensor material

211

Application of Sulfur-Modified Magnetic Nanoparticles for Cadmium Removal from Aqueous Solutions

212

Application of Sumudu Transform in Fractional Kinetic Equations

213

Application of Sumudu Transform in Fractional Kinetic Equations

214

Application of Sumudu Transform in Generalized Fractional Reaction–Diffusion Equation

215

APPLICATION OF SUPER ELEMENTS TO FREE VIBRATION ANALYSIS OF LAMINATED STIFFENED PLATES

216

Application of Superabsorbent and Mulch on Some Traits of African Marigold (Tagetes erecta) under Irrigation Intervals

217

Application of superconducting magnetic energy storage unit for damping of subsynchronous oscillations in power systems

218

Application of Superconducting Magnetic Energy Storage unit in multi-machine power systems

219

Application of superconducting quantum interference devices to nuclear magnetic resonance

220

Application of supercritical carbon dioxide (scCO2) for the extraction of glycolipids from Lactobacillus plantarum B-01

221

Application of supercritical carbon dioxide (scCO2) for the extraction of lipopolysaccharides (LPS) from Salmonella enterica subsp. enterica PCM 2266

222

Application of supercritical carbon dioxide for the extraction of alkylresorcinols from rye bran

223

Application of Supercritical Carbon Dioxide in Energetic Materials Processes: A Review

224

Application of supercritical carbon dioxide–co-solvent mixtures for removal of organic material from archeological artifacts for radiocarbon dating

225

Application of supercritical CO2 in lipid extraction – A review Review Article

226

Application of supercritical fluid extraction for fractionation of enantiomers

227

Application of Supercritical Fluid ‎Technology for Preparation of Drug Loaded ‎Solid Lipid Nanoparticles

228

Application of supercritical fluid to preparation of powders of high-molecular weight drugs for inhalation

229

Application of superelastic NiTi wires for mandibular distraction

230

Application of superelastic NiTi wires for mandibular distraction

231

Application of superfluid shock tube facility to experiments of highly transient low-temperature thermo-fluid dynamic phenomena Original Research Article

232

Application of superheated emulsion in neutron spectrometry at 45 MeV electron linac

233

Application of superheated emulsion in neutron spectrometry at 45 MeV electron linac

234

‎Application of superhypergraphs-based domination number in real world

235

Application of superparamagnetic iron oxide to imaging of hepatocellular carcinoma

236

Application of superparamagnetic nanoparticles in purification of plasmid DNA from bacterial cells

237

Application of Support Vector Machine and Gene Expression Programming on Tropospheric ozone Prognosticating for Tehran Metropolitan

238

Application of support vector machine combined with K-nearest neighbors in solar flare and solar proton events forecasting Original Research Article

239

Application of Support Vector Machine method in Hyperspectral mapping of Ophiolite mélanges-a Case study from eastern Iran

240

Application of Support Vector Machine Regression for Predicting Critical Responses of Flexible Pavements

241

Application of support vector machines for fault diagnosis in power transmission system

242

Application of support vector machines in financial time series forecasting

243

Application of support vector machines in scour prediction on grade-control structures

244

Application of support vector machines in scour prediction on grade-control structures

245

Application of support vector machines to b،width reservation in sectored cellular communications

246

Application of support vector machines to corporate credit rating prediction

247

Application of support vector regression in predicting thickness strains in hydro-mechanical deep drawing and comparison with ANN and FEM

248

Application of supported liquid membrane probe for extraction and preconcentration of organotin compounds from environmental water samples

249

Application of supported liquid membrane probe for extraction and preconcentration of organotin compounds from environmental water samples Original Research Article

250

Application of supported liquid membranes containing methyl cholate in cyclohexane for the carrier-mediated transport of sugars Original Research Article

251

Application of support-vector-machine-based method for feature selection and classification of thyroid nodules in ultrasound images

252

Application of suppression subtractive hybridization (SSH) to cloning differentially expressed cDNA in Dunaliella salina (chlorophyta) under hyperosmotic shock

253

Application of surface acoustic waves for optimisation of biocompatibility of carboxymethylated dextran surfaces

254

Application of surface analytical and modification techniques to biomaterial research

255

Application of surface enzyme treatments using laccase and a hydrophobic compound to paper-based media

256

Application of surface impedance concept to inverse problems of reconstructing transient currents

257

Application of surface modifying macromolecules for the preparation of membranes for membrane distillation Original Research Article

258

Application of surface molecular imprinting adsorbent in expanded bed for the adsorption of Ni2+ and adsorption model

259

Application of surface photovoltage technique in photocatalysis studies on modified TiO2 photo-catalysts for photo-reduction of CO2

260

Application of surface plasmon resonance for the detection of carbohydrates, glycoconjugates, and measurement of the carbohydrate-specific interactions: A comparison with conventional analytical techniques. A critical review Review Article

261

Application of surface plasmon resonance sensing to studying elastohydrodynamic lubricant films

262

Application of surface plasmon resonance spectroscopy for adsorption studies of different types of components on poly(dimethylsiloxane) Original Research Article

263

Application of Surface Plasmon Resonance toward Studies of LowMolecular-Weight Antigen–Antibody Binding Interactions

264

Application of surface response analysis to the optimisation of nitric passivation of cp titanium and Ti6Al4V

265

Application of surface response analysis to the optimization of penicillin acylase purification in aqueous two-phase systems

266

Application of surfacederived attributes in determining boundaries of potentialfield sources

267

Application of surfaces of ultimate strength for thin-walled beams

268

Application of surfactant assisted dispersive liquid–liquid microextraction as an efficient sample treatment technique for preconcentration and trace detection of zonisamide and carbamazepine in urine and plasma samples

269

Application of surfactant assisted dispersive liquid–liquid microextraction for sample preparation of chlorophenols in water samples

270

Application of surfactant modified zeolite membrane electrode towards potentiometric determination of perchlorate

271

Application of surfactants and microemulsions to the extraction of pyrene and phenanthrene from soil with three different extraction methods Original Research Article

272

Application of surge arresters for the protection of SF6 substations

273

Application of surrogate based particle swarm optimization to the reliability-based robust design of composite pressure vessels

274

Application of surrogate methods for assessing the bioavailability of PAHs in sediments to a sediment ingesting bivalve

275

Application of survival analysis methods to long-term care insurance

276

Application of Survival Tree Model in Determining Affecting Factors in Breastfeeding Duration

277

Application of sustainability indicators, soil organic matter and electrical conductivity, to resource management in the northern grains region

278

Application of sustainable development concepts to an alluvial mineral extraction project in Lower Caroni River, Venezuela

279

APPLICATION OF SVD NOISE-REDUCTION TECHNIQUE TO PCA BASED RADAR TARGET RECOGNITION

280

Application of SVM and ANN for image retrieval

281

Application of SVM and ANN for intrusion detection

282

Application of SVM for investigation of factors affecting compressive strength and consistency of geopolymer concretes

283

Application of SVM on satellite images to detect hotspots in Jharia coal field region of India Original Research Article

284

Application of SVM to predict membrane protein types

285

Application of SVM-RFE on EEG signals for detecting the most relevant scalp regions linked to affective valence processing

286

Application of Swarm Based Optimization Algorithms for Solving Dynamic Economic Load Dispatch Problem

287

Application of SWAT model to investigate nitrate leaching in Hamadan–Bahar Watershed, Iran

288

Application of SWAT model to simulate nitrate and phosphate leaching from agricultural lands to the rivers

289

Application of sweet sorghum for biodiesel production by heterotrophic microalga Chlorella protothecoides

290

Application of switchable glazing to high-rise residential buildings in Hong Kong

291

Application of switched adaptive system to load forecasting

292

Application of SYBR green real-time PCR assay for specific detection of Salmonella spp. in dairy farm environmental samples

293

Application of symbolic computer algebra in high-level data-flow synthesis

294

Application of symbolic data analysis for structural modification assessment

295

Application of symbolic dynamics to characterize coordinated activity in the context of biological neural networks

296

Application of symbolic mathematics in modelling fire for providing a safe environment

297

Application of symmetric fuzzy linear programming in life cycle assessment

298

Application of symmetric indirect Trefftz method to free vibration problems in 2D

299

Application of symmetrized covariances in space confliction prediction Original Research Article

300

Application of syn-[2.5]Metacyclophane to the Extended Biaryl Structure by Suzuki Coupling Reaction

301

APPLICATION OF SYNCHRONOUS AVERAGING TO VIBRATION MONITORING OF ROLLING ELEMENT BEARINGS

302

Application of synchronous fluorescence scan spectroscopy for size dependent simultaneous analysis of CdTe nanocrystals and their mixtures

303

Application of synchrotron microtomography for pore structure characterization of deteriorated cementitious materials due to leaching

304

Application of synchrotron radiation for the study of nonstoichiometric oxygen-permeable perovskites by means of X-ray diffraction

305

Application of synchrotron radiation for the study of nonstoichiometric oxygen-permeable perovskites by means of X-ray diffraction

306

Application of synchrotron radiation to ablation of frozen acetone targets

307

Application of synchrotron radiation to analyze the precipitation in ODS materials before irradiation in Fe–9%Cr single grain of powder and consolidated Fe–18%Cr

308

Application of synchrotron radiation to in situ characterization of catalysts

309

Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches Original Research Article

310

Application of synchrotron X-ray fluorescent analysis to studies of the records of paleoclimates of Eurasia stored in the sediments of Lake Baikal and Lake Teletskoye

311

Application of synchrotron X-ray fluorescent analysis to studies of the records of paleoclimates of Eurasia stored in the sediments of Lake Baikal and Lake Teletskoye

312

Application of synopsys’ taurus TCAD in developing CMOS fabrication process modules

313

Application of synoptic weather typing to an investigation of nocturnal ozone concentration at a maritime location, New Zealand

314

Application Of Synthesised Zeolite A From Kankara Kaolin For Solar Adsorption Refrigeration

315

Application of Synthesized Nanoscale Zero-Valent Iron in the Treatment ‎of Dye Solution Containing Basic Yellow 28‎‏ ‏

316

APPLICATION OF SYNTHETIC BANDWIDTH APPROACH IN SAR POLAR FORMAT ALGORITHM USING THE DERAMP TECHNIQUE

317

Application of synthetic fluid inclusions to simultaneous temperature–pressure logging in high-temperature (sub- to supercritical) geothermal systems

318

Application of synthetic polymers as adsorbents for the removal of cadmium from aqueous solutions: Batch experimental studies

319

Application of system dynamics and fuzzy logic to forecasting of municipal solid waste Original Research Article

320

Application of System Dynamics in Forecasting: A Systematic Review

321

Application of System Dynamics model as decision making tool in urban planning process toward stabilizing carbon dioxide emissions from cities

322

Application of system identification modelling to solar hybrid systems for predicting radiation, temperature and load

323

Application of system identification techniques to aircraft gas turbine engines

324

Application of System of Rice Intensification (SRI) Methods on Productivity of Jasmine Rice Variety in Southern Iraq

325

Application of systems biology for bioprocess development

326

Application of Systems Modeling Language (SySML) for Cognitive Work Analysis in Systems Engineering Design Process

327

Application of Systems Thinking in Health: Opportunities for Translating Theory into Practice; Comment on “Constraints to Applying Systems Thinking Concepts in Health Systems: A Regional Perspective f

328

APPLICATION OF TABU SEARCH FOR SOLVING THE

329

Application of tabu search in optimal system design and operation of MRT power supply systems

330

Application of tabu search strategy for finding low energy structure of protein

331

Application of Taguchi and regression analysis on surface roughness in machining hardened AISI D2 steel

332

Application of Taguchi approach to optimize friction stir spot welding parameters of polypropylene

333

Application of Taguchi approach to optimize of FSSW parameters on joint properties of dissimilar AA2024-T3 and AA5754-H22 aluminum alloys

334

Application of Taguchi Design and Response Surface Methodology for Improving Conversion of Isoeugenol into Vanillin by Resting Cells of Psychrobacter sp. CSW4

335

Application of Taguchi Design for Optimization of Corrosion Behavior of Amorphous Silica Thin Film Deposited Through Sol-Gel Dipping Technique

336

Application of Taguchi experimental design in optimization of desalination using purified carbon nanotubes as adsorbent

337

Application of Taguchi method in optimization of cervical ring cage

338

Application of Taguchi method in optimization of desalination by vacuum membrane distillation Original Research Article

339

Application of Taguchi Method in Optimization of Shallow PN Junction Formation

340

Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning

341

Application of Taguchi method in the optimization of end milling parameters

342

Application of taguchi method in the optimization of wastewater treatment using spiral-wound reverse osmosis element

343

Application of Taguchi method on optimization of testing parameters for erosion of glass fiber reinforced epoxy composite materials

344

Application of Taguchi method to determine the optimal water depth and glass cooling rate in solar stills

345

Application of Taguchi Method to Investigate the Effects of Process Factors on the Production of Industrial Piroxicam Polymorphs and Optimization of Dissolution Rate of Powder

346

Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3

347

Application of Taguchi Methodology in adsorption of Malachite Green dye using chemically enhanced Bambusa Tulda (Indian Timber Bamboo)

348

Application of Taguchi methods to DEM calibration of bonded agglomerates

349

Application of Taguchi optimization technique in determining aluminum to brass friction stir welding parameters

350

Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin-shell part

351

Application of Taguchi technique to investigation of geometry and position of V-ring indenter in fine-blanking process

352

Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites

353

Application of Taguchi techniques to study friction and wear properties of MoS2 coatings deposited on laser textured surface

354

Application of Taguchi’s Design of Experiment in Performance Analysis of Destination Sequence Distance Vector (DSDV) Routing Protocol in Mobile Ad Hoc Networks

355

Application of Taguchi’s experimental design method for optimization of Acid Red 18 removal by electrochemical oxidation process

356

Application of Taguchi’s methods to investigate some factors affecting microporosity formation in A360 aluminium alloy casting

357

APPLICATION OF TAGUCHIʹS OPTIMIZATION METHOD AND SELF-ADAPTIVE DIFFERENTIAL EVOLUTION TO THE SYNTHESIS OF LINEAR ANTENNA ARRAYS

358

Application of tailor-made membranes in a multi-stage process for the purification of sweeteners from Stevia rebaudiana Original Research Article

359

Application of Talc Formulations of Pseudomonas fluorescens Migula and Trichoderma viride Pers. ex S.F. Gray Decrease the Sheath Blight Disease and Enhance the Plant Growth and Yield in Rice

360

Application of Tandem Cascade to Design of Fan Stator with Supersonic Inflow

361

Application of tandem column solid phase extraction and flame atomic absorption spectrometry for the determination of inorganic and organically bound forms of iron in wine

362

Application of tandem Ugi reaction/ring-closing metathesis in multicomponent synthesis of unsaturated nine-membered lactams

363

Application of tartarate derived bidentate bioxazolines in enantioselective addition of terminal alkynes to imines

364

Application of Task Complexity Along +/- single Task Dimension and its Effect on Fluency in Writing Performance of Iranian EFL Learners

365

Application of taste sensing system for characterisation of enzymatic hydrolysates from shrimp processing by-products

366

Application of Tau Approach for Solving Integro-Differential Equations with a Weakly Singular Kernel

367

Application of Taylor transformation to nonlinear predictive control problem

368

Application of Taylor transformation to optimize rectangular fins with variable thermal parameters

369

APPLICATION OF TAYLOR TRANSFORMATION TO THE THERMAL STRESSES IN ISOTROPIC ANNULAR FINS

370

Application of TDA technique to estimate the hydrocarbon saturation using MRIL Data: A Case study for a Southern Iranian Oilfield

371

Application of T-DNA insertional mutagenesis for improving cellulase production in the filamentous fungus Trichoderma reesei

372

Application of TDR Technology to Water Content Monitoring of Capillary Barriers Made of Pulp and Paper Residues

373

Application of TDR Technology to Water Content Monitoring of Capillary Barriers Made of Pulp and Paper Residues

374

Application of TDR to water level measurement

375

Application of TDS technique to developed reservoirs

376

Application of TDS technique to developed reservoirs

377

APPLICATION OF TECHNIQUES ASSISTING THE COMMUNICATION WITH DEMENTIA PATIENTS BY STUDENTS – SOCIAL WORK

378

Application of Technology and Science of Intellectual Property Rights in the Papua Traditional Culture Perspective

379

application of technology in educating nursing students during covid-19: a systematic review

380

Application of telluric-telluric profiling combined with magnetotelluric and self-potential methods to geothermal exploration in the Fujian Province, China

381

Application of temperature fuzzy controller in an indirect resistance furnace

382

Application of Temperature Inference Method Based on Soft Sensor Technique to Plate Production Process Original Research Article

383

Application of temperature modified titanate nanotubes for removal of an azo dye from water in a hybrid photocatalysis-MD process

384

Application of Temperature Parallel Simulated Annealing to Loading Pattern Optimizations of Pressurized Water Reactors

385

Application of temperature rising elution fractionation in polyolefins

386

Application of temperature-controlled attenuated total reflectance-mid-infrared (ATR-MIR) spectroscopy for rapid estimation of butter adulteration

387

Application of temperature-induced phase partition of proteins for the detection of smoked paprika adulteration by free zone capillary electrophoresis (FZCE)

388

Application of temperature-programmed oxidation, multinuclear MAS NMR and DRIFT spectroscopy to the surface characterization of modified silica nanoparticles

389

Application of temperature-programmed reduction to the characterization of anionic clays

390

Application of temporal temperature gradient gel electrophoresis for characterisation of fungal endophyte communities of Salix caprea L. in a heavy metal polluted soil Original Research Article

391

Application of tephrochronology to the timing and correlation of palaeoceanographic events recorded in Holocene and Late Glacial shelf sediments off North Iceland

392

Application of ternary diagrams in the design of methanation systems

393

Application of TERRA/MODIS images, TM images and weather data to assess the effect of cold damage on rice yield

394

Application of test reactions to study micromixing in the rotor-stator mixer (test reactions for rotor-stator mixer)

395

Application of tests of goodness of fit in determining the probability density function for spacing of steel sets in tunnel support system

396

Application of tetracyclic polyprenoids as indicators of input from fresh-brackish water environments

397

Application of tetramer technology in studies on autoimmune diseases

398

Application of tetraoxadiaza-crown ether derivatives as chiral selector modifiers in capillary electrophoresis

399

Application of Text Mining to Extract Hotel Attributes and Construct Perceptual Map of Five Star Hotels from Online Review: Study of Jakarta and Singapore Five-Star Hotels

400

Application of Text Summarization techniques to the Geographical Information Retrieval task

401

Application of Texture Analysis Method for Classification of Benign and Malignant Thyroid Nodules in Ultrasound Images

402

Application of Texture Analysis Method for Classification of Benign and Malignant Thyroid Nodules in Ultrasound Images

403

Application of texture image analysis for the classification of bovine meat

404

Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y Original Research Article

405

Application of TG-DTA to study of Ancient Potteries from Kaveripakkam, Vellore district, Tamilnadu, India

406

Application of TG–DTA to the study of Amynteon lignites, northern Greece

407

Application of TG–DTG analysis and centrifugal separation in the investigation of less combustible constituents in coals

408

Application of TG-FTIR to study SO2 evolved during the thermal decomposition of coal-derived pyrite

409

Application of TG–FTIR to the determination of organic oxygen and its speciation in the Argonne premium coal samples

410

Application of TG-FTIR to the determination of oxygen content of coals

411

Application of thallium(I) as an internal standard redox process in voltammetric measurements

412

Application of Thau Observer for Fault Detection of Micro Parallel Plate Capacitor Subjected to Nonlinear Electrostatic Force

413

APPLICATION OF THE "EQUIVALENT CABLE BUNDLE METHOD" FOR MODELING CROSSTALK OF COMPLEX CABLE BUNDLES WITHIN UNIFORM STRUCTURE WITH ARBITRARY CROSS-SECTION

414

Application of the .G0 G /-expansion method to (3 C1)-dimensional nonlinear evolution equations

415

Application of the `double spikeʹ technique to Pb-isotope geochronology

416

Application of the ‘waste to water’ concept to Sharm El Sheikh through a CFD simulation Original Research Article

417

Application of the “Hybrid Approach” to Chronic Total Occlusions in Patients With Previous Coronary Artery Bypass Graft Surgery (from a Contemporary Multicenter US Registry)

418

Application of the “MBWC” two-dimensional position readout technique to a multiwire proportional counter

419

Application of the “threshold of toxicological concern” to derive tolerable concentrations of “non-relevant metabolites” formed from plant protection products in ground and drinking water

420

Application of the “trimethyl lock”1 to Ganciclovir, a pro-prodrug with increased oral bioavailability

421

Application of the “VARICOL” process to the separation of the isomers of the SB-553261 racemate

422

Application of the 1,2-Dihydroxybenzene-3,5-Disulfonic Acid for Separation and Preconcentration of Trace Iron and Determination by Eight Order Derivative Spectrophotometry

423

Application of the 15N technique to determine the contributions of nitrification and denitrification to the flux of nitrous oxide from aerated pig slurry

424

Application of the 29Si NMR 2D INEPT spin-flip J-resolved technique to the structural analysis of trimethylsilylated glycosides

425

Application of the 2-D constant strain assumption to FEM elements consisting of an arbitrary number of nodes

426

Application of the 3-D boundary element method to delaminated composite structures

427

Application of the 6-aminoquinolyl-N-hydroxysccinimidyl carbamate (AQC) reagent to the RP-HPLC determination of amino acids in infant foods

428

Application of the accelerated failure time model to lung cancer data

429

Application of the accident consequence analysis in the emergency system design of an SI cycle hydrogen production plant

430

Application of the accurate mass and time tag approach in studies of the human blood lipidome

431

Application of the acoustic emission technique to characterise liquid transfer in a porous ceramic during drying

432

Application of the adaptive cross approximation technique for the coupled BE-FE solution of symmetric electromagnetic problems

433

APPLICATION OF THE ADAPTIVE MATRIX FILTER TO INVERSE HEAT CONDUCTION PROBLEMS

434

Application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sobol Approaches for Modeling and Sensitivity Analysis of the Biosorption of Triglyceride from the Blood Serum

435

Application of the addition of triorganozincates to N-(tert-butanesulfinyl)imines to the enantioselective synthesis of α-amino acids

436

Application of the ADM1 model to advanced anaerobic digestion

437

Application of the Adomian decomposition method for the Fokker–Planck equation

438

Application of the adsorption effect of optical fibres for the determination of critical micelle concentration

439

Application of the airflow control by electro-hydrodynamic actuator

440

Application of the AMBUR R package for spatio-temporal analysis of shoreline change: Jekyll Island, Georgia, USA

441

Application of the Analytic Hierarchy Process (AHP) in Multi- Criteria Analysis of the Selection of Cranes

442

Application of the analytic hierarchy process (AHP) in multi-criteria analysis of the selection of intelligent building systems

443

Application of the analytic hierarchy process in agriculture in developing countries

444

Application of the analytic hierarchy process to compare alternatives for the long-term management of surplus mercury

445

Application of the Analytic Hierarchy Process to irrigation project improvement: Part I. Impacts of irrigation project internal processes on crop yields

446

Application of the Analytic Hierarchy Process to irrigation project improvement: Part II. How professionals evaluate an irrigation project for its improvement

447

Application of the analytical hierarchy process (AHP) for landslide susceptibility mapping: A case study from the Tinau watershed, west Nepal

448

Application of the analytical hierarchy process in the selection of desalination plants Original Research Article

449

Application of the analytical hierarchy process to establish health care waste management systems that minimise infection risks in developing countries

450

Application of the Anderko–Pitzer EoS to the calculation of thermodynamical properties of systems involved in the supercritical water oxidation process

451

Application of the ANOVA-PCA method to stability studies of reference materials Original Research Article

452

Application of the Ant Colony Search Algorithm to Reactive Power Pricing in an Open Electricity Market

453

Application of the antibunching in dye fluorescence: measuringthe excitation rates in solution Original Research Article

454

Application of the Antipodal Grasp Theorem to Cable-Driven Robots

455

Application of the aqueous two-phase systems of ethylene and propylene oxide copolymer-maltodextrin for protein purification

456

Application of the arbitrarily primed polymerase chain reaction for the detection of DNA damage

457

Application of the Arbitrary Lagrangian Eulerian formulation to the numerical simulation of cold roll forming process

458

Application of the arc-length method for the stability analysis of solid unreinforced masonry walls under lateral loads

459

Application of the arc-length method in nonlinear frequency response

460

Application of the area under the curve of carboplatin in predicting toxicity and efficacy

461

Application of the Armstrong friction model to study dynamic transient response in Tworkpiece–fixture systems

462

Application of the Arrhenius equation to solid state kinetics: can this be justified?

463

Application of the assay of aflatoxins by liquid chromatography with fluorescence detection in food analysis

464

Application of the asymmetric aminohydroxylation reaction for the syntheses of HIV-protease inhibitor, hydroxyethylene dipeptide isostere and γ-amino acid derivative

465

Application of the Australian river bioassessment system (AUSRIVAS) in the Brantas River, East Java, Indonesia

466

Application of the authigenic 10Be/9Be dating method to continental sediments: Reconstruction of the Mio-Pleistocene sedimentary sequence in the early hominid fossiliferous areas of the northern Chad Basin

467

APPLICATION OF THE AUTO- AND CROSS-POWER SPECTRA TO HYDRO- AND AEROACOUSTICS

468

Application of the average field method to the prediction of stable shapes of coherent precipitates under uniaxial stresses

469

Application of the average field method to the prediction of stable shapes of coherent precipitates under uniaxial stresses

470

Application of the Avrami Theory for Wax Crystallisation of Synthetic Crude Oil

471

Application of the Avrami, Tobin, Malkin, and Urbanovici–Segal macrokinetic models to isothermal crystallization of syndiotactic polypropylene

472

Application of the aza-Wittig reaction to the synthesis of pyrazinothienotriazolopyrimidinones: a new tetracyclic ring system

473

Application of the background-field method to the electroweak standard model Original Research Article

474

Application of the Baheʹs pseudolattice theory to water–1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) mixtures at 298.15 K: Part II. Acidity scales

475

Application of the Baheʹs pseudolattice-theory to water—1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) mixtures at 298.15 K: Part I. Autoprotolysis constants

476

Application of the ballistic plasmatron of superadiabatic compression for surface treatment

477

Application of the ball-spine algorithm to design an axial-flow comprssor blade

478

Application of the Barker lattice theory to modeling of thermodynamic properties of PbO–B2O3–SiO2 melts

479

Application of the Base Isolation Systems to a Reinforced Concrete Building and Cost Analysis

480

Application of the bayer immuno I AFP and HCG-ER assays in a multi-centre maternal serum screening program

481

Application of the Bayesian calibration methodology for the parameter estimation in CoupModel

482

Application of the Beck model to stock markets: Value-at-Risk and portfolio risk assessment

483

Application of the Bellman and Zadeh's principle for identifying the fuzzy decision in a network with intermediate storage

484

Application of the BEM for numerical modelling of continuous casting

485

Application of the BEM in biopotential problems

486

Application of the BEM to chromium electroplating simulation and to identification of experimental polarisation laws

487

Application of the BHQ benzannulation reaction to the synthesis of benzo-fused coumarins

488

Application of the bilinear compression function to calorimetry

489

Application of the bilinear compression function to calorimetry

490

Application of the biomarker responses in scallop (Chlamys farreri) to assess metals and PAHs pollution in Jiaozhou Bay, China

491

Application of the biorefinery concept to produce l-lactic acid from the soybean vinasse at laboratory and pilot scale

492

Application of the biotin–dUTP chromosome labelling technique to study the role of 5-bromo-2′-deoxyuridine in the formation of UV-induced sister chromatid exchanges in CHO cells

493

Application of the bispectrum for detection of small nonlinearities excited sinusoidally

494

Application of the blackbody radiation source for characteristics measurement of submillimeter low-temperature direct detectors

495

Application of the blackbody radiation source for characteristics measurement of submillimeter low-temperature direct detectors

496

Application of the block backward differential formula for numerical solution of Volterra integro-differential equations

497

Application of the boundary element method for the numerical modelling of the solidification of cylindrical and spherical castings

498

Application of the boundary element method to rubber-like elasticity

499

Application of the boundary integral equation method to the coupled bending-torsional vibrations of elastic beams

500

Application of the boundary-domain element method to the pre/post-buckling problem of von Kármán plates

501

Application of the boundary-domain integral equation in elastic inclusion problems

502

Application of the boundary-layer theory to the analysis of composite shells of revolution

503

Application of the Box-Behnken Design for Optimizing Biodiesel Output from Castor Oil: Analysis and Characterization

504

Application of the Box–Behnken design to the optimization of process parameters in foam cup molding

505

Application of the Box-Wilson experimental design method for the spherical oil agglomeration of coal

506

Application of the bridgehead fragments for the design of conformationally restricted melatonin analogues

507

Application of the broad-spectrum bacteriocin enterocin AS-48 to inhibit Bacillus coagulans in canned fruit and vegetable foods

508

Application of the BTEM family of algorithms to reconstruct individual UV–Vis spectra from multi-component mixtures

509

Application of the Building Environmental Performance Model (BEPM) in Hong Kong

510

Application of the bulk properties of a silicone PSA to peeling

511

Application of the C4.5 classifier to building an expert system for ion chromatography

512

Application of the Callaway theory to analysis of thermal transport by phonons in ceramic and biomorphic composites

513

Application of the CALPHAD approach to Mg-alloys design

514

Application of the CALPHAD approach to Mg-alloys design

515

Application of the CALPHAD method to predict the thermal conductivity in dielectric and semiconductor crystals

516

Application of the CAMEL process simulator to the dynamic simulation of gas turbines

517

Application of the Campbell–Magaard theorem to higher-dimensional physics

518

Application of the can technique and radon gas analyzer for radon exhalation measurements

519

Application of the CARLIT index along a biogeographical gradient in the Alboran Sea (European Coast)

520

Application of the Catalytic Friedel-Crafts Acylation Reaction and Regioselectivity Correlations

521

Application of the cause–consequence diagram method to static systems

522

Application of the cause–consequence diagram method to static systems

523

Application of the cavity model to lossy power-return plane structures in printed circuit boards

524

Application of the CBM-CFS3 model to estimate Italyʹs forest carbon budget, 1995–2020

525

Application of the CBM-CFS3 model to estimate Italyʹs forest carbon budget, 1995–2020

526

Application of the CBSM method for selected ternary and pseudo-ternary L + L systems, and novel criterion for extractants capability

527

Application of the CEN (European Committee for Standardization) small punch creep testing code of practice to a representative repair welded P91 pipe

528

Application of the Central Encryption System in the Dynamic Secret Sharing Scheme (II)

529

Application of the Central Limit Theorem in microbial risk assessment: High number of servings reduces the Coefficient of Variation of food-borne burden-of-illness

530

APPLICATION OF THE CENTRE MANIFOLD THEORY IN NON-LINEAR AEROELASTICITY

531

Application of the Cercignani–Lampis scattering kernel to calculations of rarefied gas flows. I. Plane flow between two parallel plates

532

Application of the Cercignani–Lampis scattering kernel to calculations of rarefied gas flows. II. Slip and jump coefficients

533

Application of the Cercignani–Lampis scattering kernel to calculations of rarefied gas flows. III. Poiseuille flow and thermal creep through a long tube

534

Application of the Characteristic Bisection Method for locating and computing periodic orbits in molecular systems Original Research Article

535

Application of the characteristic root index model to the estimation of N-octanol/water partition coefficients. polychlorinated biphenyls

536

Application of the charged polymeric materials as additional permselective membranes for improvement of the performance characteristics of urea-sensitive ENFETs 2. Urea determination in blood serum

537

Application of the Chebyshev polynomial in solving Fredholm integral equations

538

Application of the Chebyshev pseudospectral method to van der Waals fluids

539

Application of the chemical vapor infiltration and reaction (CVI-R) technique for the preparation of highly porous biomorphic SiC ceramics derived from paper

540

Application of the chemical vapor-etching in polycrystalline silicon solar cells

541

Application of the chemiluminescence systems to evaluate the role of Fcγ and complement receptors in stimulating the oxidative burst in neutrophils

542

Application of the Cheng-Finnie method to the calculation of stress intensity factors in thin-walled pipes with long axial cracks with allowance for geometric nonlinearity

543

Application of the chiral base desymmetrisation of imides to the synthesis of the alkaloid jamtine and the antidepressant paroxetine

544

Application of the chromatographic retention index system for the estimation of the calibration constants of permeation passive samplers with polydimethylsiloxane membranes

545

Application of the CIE test cases to assess the accuracy of lighting computer programs

546

Application of the cluster variation method to ε-Fe2N1-z and ζ-Fe2N: ordering of interstitial atoms Original Research Article

547

Application of the cluster/site approximation to fcc phases in Ni-Al-Cr system

548

Application of the cluster/site approximation to fcc phases in Ni–Al–Cr system Original Research Article

549

Application of the cluster/site approximation to fcc phases in the Ni–Al–Cr–Re system Original Research Article

550

Application of the cluster/site approximation to the calculation of coherent interphase boundary energies

551

Application of the cluster/site approximation to the calculation of coherent interphase boundary energies Original Research Article

552

Application of the cluster/site approximation to the calculation of multicomponent alloy phase diagrams

553

Application of the cluster/site approximation to the calculation of multicomponent alloy phase diagrams Original Research Article

554

Application of the cluster-site approximation (CSA) model to the f.c.c. phase in the Ni–Al system Original Research Article

555

Application of the CN Intermediate-term Earthquake Prediction Algorithm to the Area of the Southern External Dinarides

556

Application of the coastal and marine ecological classification standard using satellite-derived and modeled data products for pelagic habitats in the Northern Gulf of Mexico

557

Application of the cohesive model for predicting the residual strength of a large scale fuselage structure with a two-bay crack

558

Application of the cohesive zone model for the evaluation of stiffness losses in a rotor with a transverse breathing crack

559

Application of the Cole-Hopf transformation for finding the analytical solutions of the dynamics of a gravitating system of spherical gas-dust cloud

560

APPLICATION OF THE COLLOCATION METHOD IN THREE DIMENSIONS TO A MODEL SEMICONDUCTOR PROBLEM

561

Application of the colloidal stability of TiO2 particles for recovery and reuse in solar photocatalysis

562

Application of the colorimetric method to chloride diffusion evaluation in concrete structures

563

Application of the combined nonlinear-condensation transformation to problems in statistical analysis and theoretical physics Original Research Article

564

Application of the combined RWG basis functions to the MFIE for the scattering analysis of small sharp-edged objects

565

Application of the comet and micronucleus assays to butterfish (Pholis gunnellus) erythrocytes from the Firth of Forth, Scotland

566

Application of the competing risks analysis to fracture toughness of silicon-killed C-Mn plate steels

567

Application of the complete multiple reciprocity method for 3D impedance extraction with multiple frequency points

568

Application of the complex network method in solid-state sintering

569

Application of the complex step method to chemistry-transport modeling

570

Application of the componential method for ecological footprint calculation of a Chinese university campus

571

Application of the computational method for predicting NOx reduction within large scale coal-fired boiler

572

Application of the computational theory of perceptions to human gait pattern recognition

573

Application of the computer code TOUGH2 to the simulation of supercritical conditions in geothermal systems

574

Application of the concept of acoustic influence coefficients for the optimization of a vehicle roof

575

Application of the Concept of Defamiliarization in Translation Studies: Case Studies of the Translation of Film Titles

576

Application of the concept of evolving structure tensors to the modeling of initial and induced anisotropy at large deformation

577

Application of the concept of traceability to the management of nuclear data

578

Application of the concept synthetic lethality toward anticancer therapy: A promise fulfilled?

579

Application of the concepts of fracture mechanics to the failure of conductive cracks in piezoelectric ceramics

580

Application of the conductimetry to the study of the transformation of KCl and Na2SO4 into K2SO4 between 5 and 30 °C

581

Application of the constant stoichiometry grouping concept to the Raman spectra of Pb(PO3)2-TeO2 glasses

582

Application of the constrained finite strip method for the buckling design of cold-formed steel columns and beams via the direct strength method

583

Application of the Constrained Interpolation Profile (CIP) scheme to two-dimensional single-phase hydrothermal reservoir simulations

584

Application of the Continuity Equation and Valve Resistance to the Evaluation of St. Jude Medical Prosthetic Aortic Valve Dysfunction

585

Application of the continuous variation method to cooperative interactions: mechanism of Fe(II)–ferrozine chelation and conditions leading to anomalous binding ratios Original Research Article

586

Application of the continuous wavelet transform on the free vibrations of a steel–concrete composite railway bridge

587

Application of the control methods for radiant floor cooling system in residential buildings

588

Application of the controllable series compensator in damping power system oscillations

589

Application of the core-shell-type granulation process for the preparation of compression molding granules containing fibrous material and powders

590

Application of the correlation theory of thermal regime and thermal radio emission for atmosphere

591

Application of the correlation-crystal-field delta-function model in analyses of Pr3+(4f2) energy-level structures in crystalline hosts Original Research Article

592

Application of the Cosford cross-coupling protocol for the stereoselective synthesis of (R)-(+)-goniothalamin, (R)-(+)-kavain and (S)-(+)-7,8-dihydrokavain

593

Application of the cos-Fourier expansion to data transformation between different latitude–longitude grids

594

Application of the COSMO-SAC-BP Solvation Model to Predictions of Normal Boiling Temperatures for Environmentally Significant Substances

595

Application of the coupled channels approach to the intermediate coupling description of photodisintegration of 1d2s-shell nuclei Original Research Article

596

Application of the coupled MIKE SHE/MIKE 11 modelling system to a lowland wet grassland in southeast England

597

Application of the coupled model to the Somme river basin

598

Application of the covering function method in quantum hydrodynamics for two-dimensional scattering problems

599

Application of the CPA equation of state to glycol/hydrocarbons liquid–liquid equilibria

600

Application of the CPA equation of state to organic acids

601

Application of the CPA equation of state to reservoir fluids in presence of water and polar chemicals

602

Application of the Cplex-isoelectronic theory to electrocyclisations, sigmatropic rearrangements, cheletropic reactions and antiaromaticity: Consistent with Santilliʹs hadronic chemistry

603

Application of the crack compliance method to long axial cracks in pipes with allowance for geometrical nonlinearity and shape imperfections (dents)

604

Application of the Cramer rule in the solution of sparse systems of linear algebraic equations

605

Application of the cross entropy method to the GLVQ algorithm

606

Application of the Cubic-Plus-Association (CPA) Equation of State to Complex Mixtures with Aromatic Hydrocarbons

607

Application of the Cubic-Plus-Association (CPA) Equation of State to Cross-Associating Systems

608

Application of the cubic-plus-association (CPA) equation of state to model the fluid phase behaviour of binary mixtures of water and tetrahydrofuran

609

Application of the Cubic-Plus-Association Equation of State to Mixtures with Polar Chemicals and High Pressures

610

Application of the cybernetic approach to price-dependent demand response for underground mining enterprise electricity consumption

611

Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility

612

Application of the cyclic phase transformation concept for investigating growth kinetics of solid-state partitioning phase transformations

613

Application of the cyclic semi-integral voltammetry and cyclic semi-differential voltammetry to the determination of the reduction mechanism of a Ni–porphyrin

614

Application of the Danckwerts method in a bubble column: Effects of surfactants on mass transfer coefficient and interfacial area

615

Application of the Dang-Van criterion for life determination under uniaxial random tension–compression with different mean values

616

Application of the Davidon-Fletcher-Powell algorithm to the resolution of multicomponent mixtures using UV-vis spectrophotometry

617

Application of the DDM and fracture mechanics model on the simulation of rock breakage by mechanical tools

618

Application of the decomposition method to identify the distributed parameters of an elliptical equation

619

Application of the decomposition technique for forecasting the load of a large electric power network

620

Application of the deletion/substitution/addition algorithm to selecting land use regression models for interpolating air pollution measurements in California

621

Application of the denaturing gradient gel electrophoresis (DGGE) technique as an efficient diagnostic tool for ciliate communities in soil

622

Application of the density functional method to study phase transitions in an associating Lennard-Jones fluid adsorbed in energetically heterogeneous slit-like pores

623

Application of the density functional theory derived orbital-free embedding potential to calculate the splitting energies of lanthanide cations in chloroelpasolite crystals

624

Application of the design of experiments procedure to the behaviour of adhesively bonded joints with plastically deformable adherends to enable further understanding of strain rate sensitivity

625

Application of the detrended fluctuation analysis (DFA) method for describing cloud breaking

626

Application of the deuterium tracing method for the estimation of tree sap flow and stand transpiration of a beech forest (Fagus silvatica L.) in a mountainous Mediterranean region

627

Application of the DFT-based embedding scheme using an explicit functional of the kinetic energy to determine the spin density of Mg+ embedded in Ne and Ar matrices

628

Application of the dibromohydroxyphenylfluorone–molybdenum(VI) complex to the sensitive spectrophotometric determination of protein Original Research Article

629

Application of the Difference Gaussian Rules to Solution of Hyperbolic Problems

630

Application of the Difference Gaussian Rules to Solution of Hyperbolic Problems: II. Global Expansion

631

Application of the different boundary elements to spur gears Original Research Article

632

Application of the differential colorimetry and polyphenolic profile to the evaluation of the chromatic quality of Tempranillo red wines elaborated in warm climate. Influence of the presence of oak wood chips during fermentation

633

Application of the differential equations method for identifying communities in sparse networks Original Research Article

634

Application of the differential impedance analysis for investigation of electroceramics

635

Application of the differential transformation method for the solution of the hyperchaotic Rِssler system

636

Application of the differential transformation method to the solution of a damped system with high nonlinearity Original Research Article

637

Application of the Diffusion–Collision Model to the Folding of Three-helix Bundle Proteins

638

Application of the digital moiré method in fracture analysis of a cracked rubber sheet

639

APPLICATION OF THE DIRECT COMPLEX STIFFNESS METHOD TO ENGINE MOUNTS

640

Application of the direct Lyapunov method to improve damping of power swings by control of UPFC

641

Application of the direct quadrature method of moments to polydisperse gas–solid fluidized beds

642

Application of the discontinuity factor theory to accelerate routine rod worth calculations for modular HTRs Original Research Article

643

Application of the discontinuous spectral Galerkin method to groundwater flow

644

Application of the discrete element method for modeling of rock crack propagation and coalescence in the step-path failure mechanism

645

Application of the Discrete Element Method to crack propagation and crack branching in a vitreous dense biopolymer material

646

Application of the Discrete Element Method to crack propagation and crack branching in a vitreous dense biopolymer material

647

Application of the discrete Fourier transform to solving the Cauchy integral equation

648

Application of the dissipated energy criterion to predict fatigue crack growth of Type 304 stainless steel following a tensile overload

649

Application of the distance function to nonmarket valuation of environmental goods and services: An illustrative example

650

Application of the distinct element method and the extended finite element method in modelling cracks and coalescence in brittle materials

651

Application of the distributed activation energy model to the kinetic study of pyrolysis of the fresh water algae Chlorococcum humicola

652

Application of the distributed database (Data-Free-Way) on the analysis of mechanical properties in neutron irradiated 316 stainless steel

653

Application of the distributed dislocation technique for calculating cyclic crack tip plasticity effects

654

Application of the distribution of citations among publications in scientometric evaluations

655

Application of the DLVO theory for particle deposition problems

656

Application of the DNDC model to predict emissions of N2O from Irish agriculture

657

Application of the double intramolecular hetero-Michael addition (DIHMA) approach in spiroketal synthesis: total synthesis of (±)-(4S*,6S*)-4-hydroxy-1,7-dioxaspiro[5.5]undecane, a Dacus oleae olive fly pheromone

658

Application of the double Laplace Adomian decomposition method for solving linear singular one dimensional thermo-elasticity coupled system

659

Application of the Dozier retrieval to wildfire characterization: a sensitivity analysis

660

Application of the DRBEM to model ablation characteristics of a thrust vector control vane

661

Application of the DRS chip for fast waveform digitizing

662

Application of the DRS chip for fast waveform digitizing

663

Application of the DSC model for nonlinear analysis of reinforced concrete frames

664

Application of the DSC-Element method to flexural vibration of skew plates with continuous and discontinuous boundaries

665

Application of the DTC control in the photovoltaic pumping system

666

Application of the dual reciprocity boundary integral equation technique to solve the nonlinear Klein–Gordon equation Original Research Article

667

Application of the dual-CGPS concept to monitoring vertical land movements at tide gauges

668

Application of the dual-kinetic-balance sets in the relativistic many-body problem of atomic structure Original Research Article

669

Application of the Dubois-model using experimental synthetic aperture radar data for the determination of soil moisture and surface roughness

670

Application of the Duplex Reactor—An Unusual and Forgotten Technique to Reduce Short Circuit Duty

671

Application of the duplex TiN coatings to improve the tribological properties of Electro Hydrostatic Actuator pump parts

672

Application of the Dynamic Cone Penetrometer (DCP) for determination of the engineering parameters of sandy soils

673

Application of the dynamic Wilhelmy plate to identification of slippage at a liquid-liquid-solid three-phase line of contact

674

Application of the dynamical flexural resonance technique to industrial materials characterisation

675

Application of the dynamical flexural resonance technique to industrial materials characterisation

676

Application of the EBSD technique for the characterisation of deformation zones in metal cutting

677

Application of the edge of chaos domain of the Zhabotinskii CNN to explore insights to hydrothermal deposit-forming processes

678

Application of the effective potentials technique for investigation of two-dimensional electron mirrors with curvilinear axial trajectory

679

Application of the effective potentials technique for investigation of two-dimensional electron mirrors with curvilinear axial trajectory

680

Application of the EGEM model to predict ephemeral gully erosion in Sicily, Italy

681

APPLICATION OF THE ELASTIC BOUNDARY INDUCED BY SHEAR HISTORY ON SATURATED COHESIVE SOIL

682

Application of the electrochemical machining technique for the characterization of zinc coatings

683

Application of the electrodeposited multilayers amorphous wires in magnetometric sensors

684

Application of the electromeniscus phenomenon to carbon nanotube erection and surface modification

685

Application of the electron channeling contrast imaging technique to the study of dislocations associated with cracks in bulk specimens

686

Application of the electron channeling contrast imaging technique to the study of dislocations associated with cracks in bulk specimens

687

Application of the electron energy loss fine structure technique to the investigation of the Al Ag binary system

688

Application of the electron-counting method to low-Z elemental analysis

689

Application of the electron-counting method to low-Z elemental analysis

690

Application of the electronic nose for uremia diagnosis

691

Application of the electrostatic mean value theorem to electrostatic sensor electrodes

692

Application of the element free Galerkin method to the simulation of plane strain rolling

693

Application of the element-free Galerkin meshless method to 3-D fracture mechanics problems

694

Application of the Elevation and Residual Static Correction methods on a selected Seismic data of West Luhais area in the South of Iraq

695

Application of the elliptic conditional moment closure model to a two-dimensional nonpremixed methanol bluff-body flame

696

Application of the EM algorithm for the multitarget/multisensor tracking problem

697

Application of the emission inventory model TEAM: Uncertainties in dioxin emission estimates for central Europe

698

Application of the EMIT 2000 Tacrolimus assay on the Abbott Architect c8000 high volume clinical chemistry analyzer

699

Application of the empirical mode decomposition and wavelet transform to seismic reflection frequency attenuation analysis

700

Application of the EN 1788 European standard for the control of saffron, pepper and blends

701

APPLICATION OF THE END POINT POLYMERASE CHAIN REACTION METHOD TO THE DETECTION OF CERTAIN MILK-BORNE BACTERIA

702

Application of the endochronic theory of plasticity for life prediction with asymmetric axial cyclic straining of AISI 304 stainless steel

703

Application of the endurance time method in seismic analysis of concrete gravity dams

704

Application of the energy balance method to a nonlinear oscillator arising in the microelectromechanical system (MEMS)

705

Application of the energy flow method to vibration control of buildings with multiple tuned liquid dampers

706

Application of the energy release rate approach for delamination growth in Glare

707

Application of the Englert–Schwinger model to the equation of state and the fullerene molecule

708

APPLICATION OF THE ENVELOPE AND WAVELET TRANSFORM ANALYSES FOR THE DIAGNOSIS OF INCIPIENT FAULTS IN BALL BEARINGS

709

Application of the environmental isotope δ18O to study water flow in unsaturated soils planted with different crops: Case study of a weighable lysimeter from the research field in Neuherberg, Germany

710

Application of the Eötvos and Guggenheim empirical rules for predicting the density and surface tension of ionic liquids analogues

711

Application of the equilibrium theory to ternary moving bed configurations (4+4, 5+4, 8 and 9 zones): II. Langmuir case

712

Application of the equivalency factor concept to the phototoxicity and –genotoxicity of furocoumarin mixtures

713

Application of the ERAS model to HE and VE of 1-alkanol + 1-alkene and 1-alkanol + 1-alkyne mixtures

714

Application of the ERAS-Model to binary mixtures of diethylamine and s-butylamine with acetonitrile in the temperature range (288.15–303.15) K

715

Application of the ERICA Integrated Approach to the Drigg coastal sand dunes

716

Application of the EROSION 3D model to the CATSOP watershed, The Netherlands

717

Application of the error propagation theory in estimates of static formation temperatures in geothermal and petroleum boreholes

718

Application of the essential work of fracture concept to nanostructured polymer materials

719

Application of the essential work of fracture method in ranking the performance in service of high-density polyethylene resins employed in pressure pipes

720

Application of the European flaw assessment procedure SINTAP to thin wall structures subjected to biaxial and mixed mode loadings

721

Application of the European flaw assessment procedure SINTAP to thin wall structures: Analytical assessment levels

722

Application of the European reference soil set (EUROSOILS) to a HPLC-screening method for the estimation of soil adsorption coefficients of organic compounds

723

Application of the european SINTAP procedure to the failure analysis of a broken forklift

724

Application of the evaporative light scattering detector to analytical problems in polymer science

725

Application of the exact muffin-tin orbitals theory: the spherical cell approximation

726

Application of the Exact Operational Matrices Based on the Bernstein Polynomials

727

Application of the exact operational matrices for solving the Emden-Fowler equations, arising in ‎Astrophysics‎

728

Application of the exergetic cost theory to the LiBr/H2O vapour absorption system

729

Application of the exergy concept in the petroleum refining and petrochemical industry

730

Application of the exergy index as ecological indicator of organically enrichment areas in the Mar Menor lagoon (south-eastern Spain)

731

Application of the -expansion method for the complex KdV equation

732

Application of the experiment design method to the study of the performance of the electrochlorination cells Original Research Article

733

Application of the experimental design of experiments (DoE) for the determination of organotin compounds in water samples using HS-SPME and GC–MS/MS

734

Application of the Exp-function method for solving the combined KdV-mKdV and Gardner-KP equations

735

Application of the explosive method for creating nitrogen layers

736

Application of the extended Brenner potential to the Si(111)7×7:H system I: cluster calculations

737

Application of the extended Brenner potential to the Si(111)7×7:H system: II: periodic calculations

738

Application of the Extended Corresponding States Method to the Calculation of the Ammonia–Water Mixture Thermodynamic Surface

739

Application of the extended Kalman filter to a lysine hydrochlorination process

740

Application of the extended Kantorovich method to the bending of clamped cylindrical panels

741

Application of the Extended Langmuir model to surface tension data of binary liquid mixtures

742

Application of the extended P + Q Q force model to N ~ Z f p shell nuclei

743

Application of the extended P+QQ force model to N≈Z fp shell nuclei Original Research Article

744

Application of the extended pairing model to heavy isotopes

745

Application of the Extended Planned Behavior Theory to Predict COVID-19 Preventive Behaviors

746

Application of the extended RSA models in studies of particle deposition at partially covered surfaces

747

Application of the extended solvation theory to study the interaction of β-CD with interpolymer of PEO and PAA

748

Application of the extraction induced by emulsion breaking for the determination of chromium and manganese in edible oils by electrothermal atomic absorption spectrometry

749

Application of the extraction induced by emulsion breaking for the determination of Cu, Fe and Mn in used lubricating oils by flame atomic absorption spectrometry

750

Application of the extreme learning machine algorithm for the prediction of monthly Effective Drought Index in eastern Australia

751

Application of the Extreme Learning Machine for Modeling the Bead Geometry in Gas Metal Arc Welding Process

752

Application of the factor method to maintenance decision support for stone cladding

753

Application of the factor method to the estimation of the service life of natural stone cladding

754

Application of the factorial design of experiments to biodiesel production from lard

755

Application of the factorization method to the characterization of weak inclusions in electrical impedance tomography

756

Application of the Faddeev-Jackiw formalism to the gauged WZW model

757

Application of the Falcon Concentrator for fine coal cleaning

758

Application of the Fast Controlled Precipitation method to assess the scale-forming ability of raw river waters Original Research Article

759

Application of the fast fourier transform to interpret geoelectric anomalies: Preliminary results

760

Application of the Fast Gauss Transform to Option Pricing

761

Application of the fast multipole method for the evaluation of magnetostatic fields in micromagnetic computations

762

Application of the fast multipole method to hybrid finite element–boundary element models

763

Application of the fault tree analysis for assessment of power system reliability

764

Application of the fault tree analysis for assessment of power system reliability

765

Application of the FCM-based neuro-fuzzy inference system and genetic algorithm-polynomial neural network approaches to modelling the thermal conductivity of alumina–water nanofluids

766

Application of the feature selection method to discriminate digitized wheat varieties

767

Application of the feature-detection rule to the Negative Selection Algorithm

768

Application of the FEM for the prediction of the surface layer characteristics after shot peening

769

Application of the FEM with adaptivity for electromagnetic inverse medium scattering problems

770

Application of the Fenton process to the dissolution and mineralization of ion exchange resins

771

Application of the ferroelectric materials to ULSI memories

772

Application of the FETI method to ASCI problems - scalability results on 1000 processors and discussion of highly heterogeneous problems

773

Application of the Feynman–Kac path integral method in finding excited states of quantum systems Original Research Article

774

Application of the Feynman-Kac path integral method in finding the ground state of quantum systems Original Research Article

775

Application of the field emitter array to the vacuum measurements

776

Application of the field method to the non-linear theory of vibrations

777

Application of the field theoretic method of Bohm and Pines to the determination of the activity coefficients of strong 1:1 electrolytes

778

Application of the fields of objects formed on the basis of unit tensor objects to describe the tensile and compression failure stresses of pine wood in the principal orthotropy plane

779

Application of the final state Auger parameter imperfect screening model for the Si L VV spectrum of porous silicon

780

Application of the finite element method for localized failure analysis in dynamic loading

781

Application of the finite element method in self-consistent relativistic mean field calculations Original Research Article

782

Application of the finite element method in the tensileshear test of adhesive technology

783

Application of the finite element method in the tensile-shear test of adhesive technology

784

Application of the finite element method to gravity data case study: Western Turkey

785

Application of the Finite Element Method to mixed-mode cyclic crack propagation calculations in specimens

786

Application of the finite element method to predict microstructure evolution in the hot forging of steel

787

Application of the finite element method to predict the crashworthy response of a metallic helicopter under floor structure onto water

788

Application of the finite volume method and unstructured meshes to linear elasticity

789

Application of the finite volume method to the radial conduction model of the CATHENA code

790

Application of the finite-element method to improve the quasi-exact reinforcement theory of fibrous polymeric composites

791

Application of the finite-element method to the vibration of a rectangular plate with elastic support at the boundary

792

Application of the first combustion model to spray combustion

793

Application of the first combustion model to spray combustion

794

Application of the flash method for the thermal characterisation of woven carbon fibre laminates

795

Application of the flexibility influence function method in the dynamic analysis of composite beams

796

Application of the flow field flow fractionation (FFFF) to the characterization of aquatic humic colloids: evaluation and optimization of the method

797

Application of the flowsheet simulation concept to fluidized bed reactor modeling. Part I: Development of a fluidized bed reactor simulation module

798

Application of the flowsheet simulation concept to fluidized bed reactor modeling. Part II—Application to the selective oxidation of n-butane to maleic anhydride in a riser/regenerator system

799

Application of the fold plication method for unilateral lung volume reduction in pulmonary emphysema

800

Application of the Force Balance Model and Fractal Scaling Analysis for Size Estimation of the Complex-Agglomerates in a Conical Fluidized Bed

801

Application of the forest–soil–water model (PnET-BGC/CHESS) to the Lysina catchment, Czech Republic

802

Application of the forest–soil–water model (PnET-BGC/CHESS) to the Lysina catchment, Czech Republic

803

Application of the forming limit stress diagram to forming limit prediction for the multi-step forming of auto panels

804

Application of the forsol model to the spruce site at Solling, Germany

805

Application of the forsol model to the spruce site at Solling, Germany

806

Application of the four-component Ugi condensation for the preparation of sulfated glycoconjugate libraries

807

Application of the fractional differential transform method to fractional-order integro-differential equations with nonlocal boundary conditions

808

Application of the Fractional Statistical Theory of Adsorption (FSTA) to Adsorption of Linear and Flexible k-mers on Two-Dimensional Surfaces

809

Application of the fragment molecular orbital method for determination of atomic charges on polypeptides

810

Application of the fragment molecular orbital method for determination of atomic charges on polypeptides. II. Towards an improvement of force fields used for classical molecular dynamics simulations

811

Application of the Freshness Quality Index (K Value) for Fresh Fish to Canned Sardines from Northwestern Mexico

812

Application of the Freundlich adsorption isotherm in the characterization of molecularly imprinted polymers

813

Application of the Freundlich adsorption isotherm in the characterization of molecularly imprinted polymers Original Research Article

814

Application of the frozen Gaussian approximation to the photodissociation of CO2

815

Application of the fulcrum axis to estimate the central scapular axis

816

Application of the full factorial design to optimization of base-catalyzed sunflower oil ethanolysis

817

Application of the full spectrum correlated-k distribution approach to modeling non-gray radiation in combustion gases

818

Application of the fully automatic 3D hp adaptive code to orthotropic heat transfer in structurally graded material properties

819

Application of the fundamental solutions by Ganowicz in a static analysis of Reissner’s plates by the boundary element method

820

Application of the fuzzy ART/MAP and MinMax/MAP neural network models to radiographic image classification

821

Application of the fuzzy ARTMAP neural network model to medical pattern classification tasks

822

Application of the fuzzy inference system to evaluate the quality of air textured warp yarn

823

Application of the fuzzy–stochastic methodology to appraising the firm value as a European call option

824

Application of the G′/G-expansion method for nonlinear diffusion equations with nonlinear source

825

Application of the Galerkin-FEM and the improved four-pole parameter method to predict acoustic performance of expansion chambers

826

Application of the GALI method to localization dynamics in nonlinear systems

827

Application of the gas production technique to feed evaluation systems for ruminants

828

Application of the Gauss theorem to the study of silicic calderas: The calderas of La Primavera, Los Azufres, and Los Humeros (Mexico)

829

Application of the GCA-EoS model to the supercritical processing of fatty oil derivatives Original Research Article

830

Application of the general method of Lyapunov functionals construction for difference Volterra equations

831

Application of the general microstructural model to erosion phenomena — mechanisms for the chemical–hydrodynamic conversion of bentonite to a pumpable slurry in conjunction with retrieval

832

Application of the general rate model and the generalized Maxwell–Stefan equation to the study of the mass transfer kinetics of a pair of enantiomers

833

Application of the General Stability Index method to assess the quality of butter lettuce during postharvest storage using a multi-quality indices analysis Original Research Article

834

Application of the general stability index method to predict quality deterioration in bighead carp (Aristichthys nobilis) heads during storage at different temperatures Original Research Article

835

Application of the generalised SAFT-VR approach for long-ranged square-well potentials to model the phase behaviour of real fluids

836

Application of the generalized differential quadrature rule to initial–boundary-value problems

837

Application of the generalized finite difference method to solve the advection–diffusion equation

838

Application of the generalized mean value function to the statistical detection of water in decane by near-infrared spectroscopy

839

Application of the generalized Pareto distribution to extreme value analysis in wind engineering

840

Application of the generalized Pareto distribution to extreme value analysis in wind engineering

841

Application of the generalized perturbation-based stochastic boundary element method to the elastostatics

842

Application of the generalized Polynomial Chaos expansion to the simulation of an internal combustion engine with uncertainties

843

Application of the generalized-α method to the time integration of the cable dynamics equations Original Research Article

844

Application of the genetic algorithm and downhill simplex methods (Nelder–Mead methods) in the search for the optimum chiller configuration

845

Application of the genetic algorithm and simulated annealing to LC filter tuning

846

Application of the genetic algorithm in modeling RF on-chip inductors

847

Application of the Genetic Algorithm to Calculate the Interaction Parameters for Multiphase and Multicomponent Systems

848

Application of the geometric technique of calculating syzygies to Rees algebras

849

Application of the Geostationary Ocean Color Imager (GOCI) to mapping the temporal dynamics of coastal water turbidity

850

Application of the Gillette model for windblown dust at Owens Lake, CA

851

Application of the glass slab optical waveguide to the spectrophotometric determination of the iron (II)—1, 10-phenanthroline complex by flow analysis

852

Application of the Global Positioning System to the measurement of overhead power transmission conductor sag

853

Application of the Godunov Type Corrective Smoothed Particle Method to Impulsive Load Studies

854

Application of the Gompertz Method for Evaluating Survival Gains in Patients Receiving Cardiac Resynchronization Therapy

855

Application of the Gould–Jacobs reaction to 4-amino-2,1,3-benzoselenadiazole

856

Application of the GRAAL model to leaching experiments with SON68 nuclear glass in initially pure water

857

Application of the grade-recovery curve in the batch flotation of Polish copper ore

858

Application of the graph theory and matrix methods to contractor ranking

859

Application of the Green functions to the problem of the thermally induced vibration of a beam

860

Application of the Grounded Theory Method to Identify and Analyze the Factors Affecting Successful Marketing of Iranian Organic Agricultural Products

861

Application of the group contribution concept to Kihara potential for estimating thermodynamic and transport properties: Part VI. Heavy globular molecules (SF6, MoF6, WF6, UF6, C(CH3)4, Si(CH3)4)

862

Application of the GRP scheme to open channel flow equations

863

Application of the GTN Model in Ductile Fracture Prediction of 7075-T651 Aluminum Alloy

864

Application of the Guggenheim, Anderson and De Boer model to correlate water activity and moisture content during osmotic dehydration of apples

865

Application of the GV-MSA model to the electrolyte solutions containing mixed salts and mixed solvents

866

Application of the harmonic balance method to a nonlinear oscillator typified by a mass attached to a stretched wire

867

Application of the harmonic balance method to ground moling machines operating in periodic regimes

868

Application of the harmony search algorithm to calculate the interaction parameters in liquid–liquid phase equilibrium modeling

869

Application of the Hartley transform for interpretation of gravity anomalies in the Shamakhy–Gobustan and Absheron oil- and gas-bearing regions, Azerbaijan

870

Application of the Hartman–Schijve equation to represent Mode I and Mode II fatigue delamination growth in composites

871

APPLICATION OF THE HBMO APPROACH TO PREDICT THE TOTAL SEDIMENT DISCHARGE

872

Application of the headspace CO2 method (ISO 14 593) to the assessment of the ultimate biodegradability of surfactants: results of a calibration exercise

873

Application of the health belief model and social cognitive theory for osteoporosis preventive nutritional behaviors in a sample of Iranian women

874

Application of the Health Belief Model for Investigation of Couples' Attitude toward Sexual Health

875

Application of the Health Belief Model in Breast Self-Examination by Iranian Female University Students

876

Application of the Health Belief Model in Promotion of Self-Care in Heart Failure Patients

877

Application of the Health Promotion Model to Predict Breakfast Consumption Among Adolescent Girls: A Structural Equation Modeling Approach

878

Application of the health promotion model to predict stages of exercise behaviour in Iranian adolescents

879

Application of the HeapSim model to the heap bioleaching of the Pueblo Viejo ore deposit

880

Application of the heat equation to the calculation of temperature rises from pulsed microwave exposure

881

Application of the Heck reaction in the synthesis of truncated naphthoic acid retinoids

882

Application of the Hereditary Theory of Strength in Predicting the Fatigue Failure of Composites

883

Application of the hexokinase-glucose-6-phosphate dehydrogenase enzymatic assay for measurement of glucose in amended soil

884

Application of the hexokinase-glucose-6-phosphate dehydrogenase enzymatic assay for measurement of glucose in amended soil

885

Application of the HGPT methodology of reactor operation problems with a nodal mixed method

886

Application of the high performance computing techniques of parflow simulator to model groundwater flow at Azraq basin

887

Application of the High Risk Model of Threat Perception to Medical Illness and Service Utilization in a Family Practice.

888

Application of the high-performance liquid chromatography method with coulometric detection for determination of vitamin B6 in human plasma and serum

889

Application of the high-spin isomer beams to the secondary fusion reaction and the measurement of g-factor Original Research Article

890

Application of the high-temperature Kelvin probe for in situ monitoring of the charge transfer at the oxygen/zirconia interface. Oxygen chemisorption isobar Original Research Article

891

Application of the holographic carrier fringe and FFT technique for deformation measurement

892

Application of the Homotopy Analysis Method to Fractional Order Gas Dynamics Equation

893

Application of the homotopy analysis method to the Poisson–Boltzmann equation for semiconductor devices

894

Application of the homotopy perturbation method for the solution of inverse heat conduction problem

895

Application of the Homotopy Perturbation Method to Solve Nonlinear Equations Arising in Oscillatory Systems

896

Application of the homotopy perturbation method to Zakharov Kuznetsov equations

897

Application of the Hot Spotting Method for the Straightening of a Large Turbine Rotor

898

Application of the HOTWAXS detector for imaging at higher X-ray energies (10–30 keV)

899

Application of the HOTWAXS detector for imaging at higher X-ray energies (10–30 keV)

900

Application of the Hough Transform for Seed Row Localisation using Machine Vision

901

Application of the HPLC-screening method for the determination of the adsorption coefficient on sewage sludges

902

Application of the H-point standard addition method to the speciation of Fe(II) and Fe(III) with chromogenic mixed reagents

903

Application of the Human Factors Analysis and Classification System Methodology to the Cardiovascular Surgery Operating Room

904

Application of the hybrid complexation-ultrafiltration process for removal of metal ions from galvanic wastewater

905

Application of the Hybrid Finite Element Mixing Cell method to an abandoned coalfield in Belgium

906

Application of the hybrid genetic-simplex algorithm for deconvolution of electrochemical responses in SDLSV method

907

APPLICATION OF THE HYBRID HARMONY SEARCH WITH SUPPORT VECTOR MACHINE FOR IDENTIFICATION AND CALSSIFICATION OF DAMAGED ZONE AROUND UNDERGROUND SPACES

908

Application‎ ‎of the‎ ‎Hybridized Discontinuous Galerkin Method for Solving One-Dimensional Coupled Burgers Equations

909

Application of the hydrogen microprint and the microautoradiography techniques to a duplex stainless steel

910

Application of the Hydrogen-Permeation Method to the Study of Carbide Precipitation Kinetics in a Low-Carbon Martensite

911

Application of the hydrologic visibility concept to estimate rainfall measurement quality of two planned weather radars

912

Application of the hydrophile–lipophile balance concept to the classification of demulsifiers and bituminous froth and its components

913

Application of the IEAF-2001 activation data library to activation analyses of the IFMIF high flux test module

914

Application of the Image Processing Method and the Beer-Lambert Law for Assessing Sea Water Intrusion in Rivers

915

Application of the impedance coupling method and the equivalent rotor model in rotordynamics

916

APPLICATION OF THE IMPROVED FINITE ELEMENT-FAST MULTIPOLE METHOD ON LARGE SCATTERING PROBLEMS

917

APPLICATION OF THE IMPROVED MATRIX TYPE FDTD METHOD FOR ACTIVE ANTENNA ANALYSIS

918

Application of the improved regression method to derive ΔGf0 of non-stoichiometric clay minerals and their correlations with compositional parameters

919

Application of the incomplete Cholesky factorization preconditioned Krylov subspace method to the vector finite element method for 3-D electromagnetic scattering problems Original Research Article

920

Application of the index of marsh bird community integrity to coastal wetlands of Georgian Bay and Lake Ontario, Canada

921

Application of the induced generalized averaging hybrid aggregation operators using interval-valued Pythagorean fuzzy environment

922

Application of the induction plasma to the synthesis of two dimensional steam methane reforming Ni/Al2O3 catalyst

923

Application of the infinite matrix theory to the solvability of a system of differential equations

924

Application of the information theory to the description of the phosphorus compounds reduction at a sewage treatment plant

925

Application of the Inhomogeneous Sample Model in Piezoelectric Photothermal Spectroscopy of Zn1-x BexTe and Cd1-xMnxTe Mixed Crystals

926

Application of the injection modeling approach to power flow analysis for systems with unified power flow controller

927

Application of the integral bifurcation method for solving modified Camassa–Holm and Degasperis–Procesi equations Original Research Article

928

Application of the integrated framework for the plant layout evaluation problem

929

Application of the integrated reliability analysis system (IRAS)

930

Application of the integrated safety analysis code system (ISAS) for ITER

931

Application of the integrated safety assessment methodology to the protection of electric systems

932

Application of the Integrated TH-PA Method to the Westinghouse AP600 Design

933

Application of the integro-moment method to steady-state two-dimensional rarefied gas flows subject to boundary induced discontinuities

934

Application of the interfacial indentation test for adhesion toughness determination

935

Application of the interference standard method for the determination of sulfur, manganese and iron in foods by inductively coupled plasma mass spectrometry Original Research Article

936

Application of the interleaved comb chopper to time-of-flight electron spectrometry

937

Application of the intermediate Hamiltonian valence-universal coupled-cluster method to atomic systems with one valence electron

938

Application of the internal friction method to studying microstructural effects in fusion materials

939

Application of the internal time operators for the Renyi map

940

Application of the interphase power controller technology for transmission line power flow control

941

Application of the intramolecular aza-Wittig reaction to the synthesis of pyrido[2,3-d]pyrimidines

942

Application of the intramolecular PIFA-mediated amidation of alkynes to the synthesis of substituted indolizidinones

943

Application of the intuitive k-NN Estimator for prediction of the Marshall Test (ASTM D1559) results for asphalt mixtures

944

Application of the inundation area—lake level rating curves constructed from the SRTM DEM to retrieving lake levels from satellite measured inundation areas

945

Application of the invariant subspace method in conjunction with the fractional Sumudu’s transform to a nonlinear conformable timefractional dispersive equation of the fifth order

946

APPLICATION OF THE INVASIVE WEED OPTIMIZATION TECHNIQUE FOR ANTENNA CONFIGURATIONS

947

Application of the inverse elasticity problem to identify irregular interfacial configurations

948

Application of the inverse Kirkendall model of radiation-induced segregation to ferritic–martensitic alloys

949

Application of the inverse method to the estimation of heat flux and temperature on the external surface in laminar pipe flow

950

Application of the ionless tripod polisher to the preparation of YBCO superconducting multilayer and bulk ceramics thin films

951

Application of the ionless tripod polisher to the preparation of YBCO superconducting multilayer and bulk ceramics thin films

952

Application of the IPCC model to a Brazilian landfill: First results

953

Application of the Irrigation Land Environmental Evaluation Tool for flood irrigation management and evaluation of water use

954

Application of the ISM EoS for polymer melts

955

Application of the ISM EoS for polymer solutions and blends

956

Application of the ISO 13472-1 in situ technique for measuring the acoustic absorption coefficient of grass and artificial turf surfaces

957

Application of the isopycnic kinetic plot method for elucidating the potential of sub-2 µm and core–shell particles in SFC

958

Application of the iterative solution method with Schur complement reduction to mixed finite elements based in a tetrahedral discretization

959

Application of the IWA ADM1 model to simulate anaerobic co-digestion of organic waste with waste activated sludge in mesophilic condition

960

Application of the J matrix method for describing the (e, 3e) reaction in the helium atom

961

Application of the Jameson Cell technology for algae and phosphorus removal from maturation ponds

962

Application of the Josephson effect to voltage metrology

963

Application of the Just-In-Time Approach to a Third-Generation Port

964

Application of the J-walking formalism to the test particle method: adsorption isotherms for atomic monolayers

965

Application of the k– turbulence model to the high Reynolds number skimming flow field of an urban street canyon

966

Application of the Kalman-Bucy filter in the stochastic differential equations for the modeling of rl circuit

967

Application of the Kamlet and Taft model in solvent extraction chemistry of metals Original Research Article

968

Application of the KD Concept to the Study of Trace Metal Removal and Desorption During Estuarine Mixing

969

Application of the killer-tree heuristic and the lambda-search method to lines of action

970

Application of the Kincaid-Cohen method to a binary gas-liquid system

971

Application of the Kineros2 rainfall–runoff model to an arid catchment in Oman

972

Application of the Kirkwood–Buff formalism to CH3(CH2)n−1OH + polyether mixtures for n = 1, 2, 3

973

Application of the Kocks–Mecking model to tensile deformation of an austenitic 25Cr–19Ni steel Original Research Article

974

Application of the kohonen neural network in coastal water management: methodological development for the assessment and prediction of water quality

975

Application of the Kolmogorov–Zurbenko filter and the decoupled direct 3D method for the dynamic evaluation of a regional air quality model

976

Application of the Kramers Kronig relations to locally resolved impedance data of polymer electrolyte fuel cells

977

Application of the Krylov–Bogoliubov–Mitropolsky method to weakly damped strongly non-linear planar Hamiltonian systems

978

Application of the Kudryashov method and the functional variable method for the complex KdV equation

979

Application of the k–ω turbulence model for a wind-induced vibration study of 2D bluff bodies

980

Application of the Lamel model for simulating cold rolling texture in molybdenum sheet Original Research Article

981

Application of the landscape development intensity (LDI) index in wetland mitigation banking

982

Application of the landscape development intensity (LDI) index in wetland mitigation banking

983

APPLICATION OF THE LAPLACE ADOMIAN DECOMPOSITION AND IMPLICIT METHODS FOR SOLVING BURGERS EQUATION

984

Application of the Laplace decomposition method for solving linear and nonlinear fractional diffusion–wave equations

985

Application of the Laplace transform dual reciprocity boundary element method in the modelling of laser heat treatments

986

Application of the large angle convergent beam electron diffraction technique to the characterisation of martensitic phases in Cu–Zn–Al alloys

987

Application of the large angle convergent beam electron diffraction technique to the characterisation of martensitic phases in Cu–Zn–Al alloys

988

Application of the laser ablation for conservation of historical paper documents

989

Application of the laser pyrolysis to the synthesis of SiC, TiC and ZrC pre-ceramics nanopowders

990

Application of the lattice Boltzmann method combined with large-eddy simulations to turbulent convective heat transfer

991

Application of the lattice Boltzmann method for solving the energy equation of a 2-D transient conduction–radiation problem

992

Application of the lattice Boltzmann method to two-phase Rayleigh–Benard convection with a deformable interface

993

Application of the Lattice-Boltzmann method to the modeling of population blob dynamics in 2D porous domains

994

Application of the LBET class adsorption models to analyze influence of production process conditions on the obtained microporous structure of activated carbons

995

Application of the LBET class adsorption models to the analysis of microporous structure of the active carbons produced from biomass by chemical activation with the use of potassium carbonate

996

Application of the LBET class models with the original fluid state model to an analysis of single, double and triple carbon dioxide, methane and nitrogen adsorption isotherms

997

Application of the Le Chatelier principle on gas reactions

998

Application of the least squares algorithm to the observer design for linear time-varying systems

999

Application of the least trimmed squares technique to prototype-based clustering

1000

Application of the Leray–Schauder alternative to nonlinear singular operator equations Original Research Article

بازگشت