<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Biomass and resource allocation patterns within the bulb of the perennial geophyte Haemanthus pubescens L. subsp. pubescens (Amaryllidaceae) in a periodic arid environment of lowland fynbos, South Africa
2
Biomass and Size Composition of the Comb Jelly Mnemiopsis sp. in the North-western Black Sea During Spring 1997 and Summer 1995
3
Biomass and volume yield after 6 years in multiclonal hybrid poplar riparian buffer strips
4
BIOMASS AS A DRIVING FORCE FOR RURAL DEVELOPMENT - MISCANTHUS BEST PRACTICES
5
Biomass as a reburning fuel: a specialized cofiring application
6
Biomass as a Source of Household Energy and Indoor Air Pollution in Nepal
7
Biomass as an energy resource in Castilla y León (Spain)
8
Biomass as an energy source: Thermodynamic constraints on the performance of the conversion process
9
Biomass as energy source in Brazil
10
Biomass assessment and small scale biomass fired electricity generation in the Green Triangle, Australia
11
Biomass assisted microfiltration of chromium(VI) using Bakerʹs yeast by ceramic membrane prepared from low cost raw materials Original Research Article
12
Biomass availability for lignocellulosic ethanol production
13
Biomass availability, energy consumption and biochar production in rural households of Western Kenya
14
Biomass based micro-turbine plant and distribution network stability
15
Biomass briquetting and its perspectives in Brazil
16
Biomass Burner with Flue Gas to Air Heat Exchanger for Rubber Sheet Drying
17
Biomass burning — a review of organic tracers for smoke from incomplete combustion Review Article
18
Biomass burning aerosols in tropical Africa
19
Biomass burning aerosols observed in Eastern Finland during the Russian wildfires in summer 2010 – Part 1: In-situ aerosol characterization
20
Biomass burning aerosols observed in Eastern Finland during the Russian wildfires in summer 2010 – Part 2: Remote sensing
21
Biomass burning and broad-scale land-cover changes in Western Africa
22
Biomass burning and oceanic primary production estimates in the Sulu Sea area over the last 380 kyr and the East Asian monsoon dynamics
23
Biomass burning as the main source of organic aerosol particulate matter in Malaysia during haze episodes
24
Biomass burning contribution to ambient volatile organic compounds (VOCs) in the Chengdu–Chongqing Region (CCR), China
25
Biomass burning contributions to urban aerosols in a coastal Mediterranean City Original Research Article
26
Biomass burning emissions over northern Australia constrained by aerosol measurements: II—Model validation, and impacts on air quality and radiative forcing
27
Biomass burning emissions over northern Australia constrained by aerosol measurements: I—Modelling the distribution of hourly emissions
28
Biomass burning in Indonesia and Papua New Guinea: natural and human induced fire events in the fossil record
29
Biomass burning in Siberia as a source of BrO to the Arctic free troposphere
30
Biomass burning influenced particle characteristics in Northern Territory Australia based on airborne measurements
31
Biomass burning influences on the composition of the remote South Pacific troposphere: analysis based on observations from PEM-Tropics-A
32
Biomass burning signatures in the atmosphere and snow at Summit, Greenland: An event on 5 August 1994
33
Biomass carbon & its prospects in electrochemical energy systems
34
Biomass carbon storage and net primary production in different habitats of Hunshandake Sandland, China
35
Biomass catalytic pyrolysis to produce olefins and aromatics with a physically mixed catalyst
36
BIOMASS CFB GASIFIER CONNECTED TO A 350 MW TH STEAM BOILER FIRED WITH COAL AND NATURAL GAS-THERMIE DEMONSTRATION PROJECT IN LAHTI IN FINLAND
37
BIOMASS CHANGES OF AN ACACIA MANGIUM PLANTATION IN SOUTHERN CHINA
38
Biomass characteristics and ethanol production of yellow poplar (Liriodendron tulipifera) treated with slurry composting and biofiltration liquid as fertilizer
39
Biomass characteristics and simultaneous nitrification–denitrification under long sludge retention time in an integrated reactor treating rural domestic sewage
40
Biomass characteristics in three sequencing batch reactors treating a wastewater containing synthetic organic chemicals
41
Biomass Characterization and Gasifier Design for Agricultural Residues
42
Biomass Characterization and its Use as Solid Fuel for Combustion
43
Biomass characterization by dielectric monitoring of viability and oxygen uptake rate measurements in a novel membrane bioreactor
44
Biomass cofiring at Seward Station
45
Biomass co-firing in a pressurized fluidized bed combustion (PFBC) combined cycle power plant: A techno-environmental assessment based on computational simulations
46
Biomass co-firing potentials for electricity generation in Poland—Matching supply and co-firing opportunities
47
Biomass co-firing trials on a down-fired utility boiler
48
Biomass co-firing under oxy-fuel conditions: A computational fluid dynamics modelling study and experimental validation
49
Biomass cofiring: economics, policy and opportunities
50
Biomass cofiring: the technology, the experience, the combustion consequences
51
Biomass combustion for greenhouse carbon dioxide enrichment
52
Biomass combustion for power generation
53
Biomass combustion in fluidized bed boilers: Potential problems and remedies
54
Biomass combustion research and utilisation in IEA countries
55
Biomass combustion with CO2 capture by chemical looping with oxygen uncoupling (CLOU)
56
Biomass concentration in fluidized bed biological reactors
57
Biomass concentration in PACT process
58
Biomass consumed in anthropogenic vegetation fires: Global patterns and processes
59
Biomass consumption and CO2, CO and main hydrocarbon gas emissions in an Amazonian forest clearing fire
60
Biomass conversion into fuel gas using circulating fluidised bed technology: the concept improvement and modelling discussion
61
Biomass conversion processes
62
Biomass conversion to carbon adsorbents and gas
63
Biomass conversion to diesel via the etherification of furanyl alcohols catalyzed by Amberlyst-15
64
Biomass conversion to energy in India—A critique
65
Biomass conversion to hydrocarbon fuels using the MixAlco™ process at a pilot-plant scale
66
Biomass conversion to liquid fuel by two-stage thermochemical cycle
67
Biomass conversions in subcritical and supercritical water: driving force, phase equilibria, and thermodynamic analysis
68
Biomass Cost Index: Mapping biomass-to-biohydrogen feedstock costs by a new approach
69
Biomass decomposition in near critical water
70
Biomass Demand-Resources Value Targeting
71
Biomass derived ionic liquids: synthesis from natural organic acids, characterization, toxicity, biodegradation and use as solvents for catalytic hydrogenation processes
72
Biomass derived producer gas as a reciprocating engine fuel—an experimental analysis
73
Biomass derived products as modifiers of the rheological properties of coking coals
74
Biomass development and waste wood co-firing
75
Biomass development in slow sand filters
76
Biomass direct chemical looping process: A perspective
77
Biomass direct chemical looping process: Process simulation
78
Biomass Distribution and Pattern of Myctophids in the Oman Sea
79
Biomass Distribution Mapping Using Airborne Digital Video Imagery and Spatial Statistics in a Semi-Arid Environment
80
Biomass downdraft gasifier with internal cyclonic combustion chamber: Design, construction, and experimental results
81
Biomass dynamics of seagrasses and the role of mangrove and seagrass vegetation as different nutrient sources for an intertidal ecosystem
82
Biomass effects on oxygen transfer in membrane bioreactors
83
Biomass effects on stalagmite growth and isotope ratios: A 20th century analogue from Wiltshire, England
84
Biomass energy and the environmental impacts associated with its production and utilization
85
Biomass energy behavior study during pyrolysis process by intraparticle gas sampling
86
Biomass energy behavior study during pyrolysis process by intraparticle gas sampling
87
Biomass energy demand and supply for South and South-East Asia––assessing the resource base
88
Biomass energy flows in Zimbabwe
89
Biomass energy from wood chips: Diesel fuel dependence?
90
Biomass energy in Bangladesh: Current status and prospects
91
Biomass energy in Malaysia: Current state and prospects
92
Biomass energy in organic farming—the potential role of short rotation coppice
93
Biomass energy in Vojvodina: Market conditions, environment and food security
94
Biomass energy in Western Europe to 2050
95
Biomass energy policies and strategies: Harvesting potential in India and Indonesia
96
Biomass energy potential and future prospect in Sudan
97
Biomass energy potential in Thailand
98
Biomass energy potential in Turkey
99
Biomass energy production in agriculture: A weighted goal programming analysis
100
Biomass energy surveying and techno-economic assessment of suitable CHP system installations
101
Biomass energy technologies for rural infrastructure and village power—opportunities and challenges in the context of global climate change concerns
102
Biomass energy transport: Analysis of bioenergy transport chains using life cycle inventory method
103
Biomass energy use at the household level in two villages of bangladesh: assessment of field methods
104
Biomass Energy Use to Reduce Climate Change: A General Equilibrium Analysis for Austria
105
Biomass energy used in a sawmill
106
Biomass energy utilization in rural areas may contribute to alleviating energy crisis and global warming: A case study in a typical agro-village of Shandong, China
107
Biomass energy: Employment generation and its contribution to poverty alleviation
108
Biomass energy: Progress in the European Union
109
Biomass energy: the scale of the potential resource
110
Biomass equations and estimation for Gmelina arborea and Nauclea diderrichii stands in Akure forest reserve
111
Biomass equations for determining fractions of common and grey alders growing on abandoned farmland and some practical implications
112
Biomass equations for determining fractions of European aspen growing on abandoned farmland and some practical implications
113
Biomass equations for determining fractions of pendula and pubescent birches growing on abandoned farmland and some practical implications
114
Biomass equations for hybrid larch growing on farmland
115
Biomass equations for sessile oak (Quercus petraea (Matt.) Liebl.) and hornbeam (Carpinus betulus L.) in aged coppiced forests in southwest Germany
116
Biomass equations for shrub species of Tamaulipan thornscrub of North-eastern Mexico
117
Biomass estimates, characteristics, biochemical methane potential, kinetics and energy flow from Jatropha curcus on dry lands
118
Biomass estimation equations in the Tamaulipan thornscrub of north-eastern Mexico
119
Biomass estimation for native perennial grasses in the plain of Mendoza, Argentina
120
Biomass estimation over a large area based on standwise forest inventory data and ASTER and MODIS satellite data: A possibility to verify carbon inventories
121
Biomass estimation with high resolution satellite images: A case study of Quercus rotundifolia
122
Biomass expansion factors (BEFs) for Scots pine, Norway spruce and birch according to stand age for boreal forests
123
Biomass fast pyrolysis in a fluidized bed reactor under N2, CO2, CO, CH4 and H2 atmospheres
124
Biomass fired hot air gas turbine with fluidized bed combustion
125
Biomass fired small-scale CHP in Sweden and the Baltic States: a case study on the potential of clustered dwellings
126
Biomass fly ash in concrete: Mixture proportioning and mechanical properties
127
Biomass fly ash in concrete: SEM, EDX and ESEM analysis
128
Biomass for energy or materials?: A Western European systems engineering perspective
129
Biomass for energy, food and materials in an industrial society of 10 billion people
130
Biomass for heat or as transportation fuel? A comparison between two model-based studies
131
Biomass for iron ore sintering
132
Biomass for transportation fuels—A cost-effective option for the German energy supply?
133
Biomass from agriculture in small-scale combined heat and power plants – A comparative life cycle assessment
134
Biomass fuel use by the rural households in Chittagong region, Bangladesh
135
Biomass fueling of a SOFC by integrated gasifier: Study of the effect of operating conditions on system performance
136
Biomass fuelled trigeneration system in selected buildings
137
Biomass fuels and forest-management strategies: How do we calculate the greenhouse-gas emissions benefits?
138
BIOMASS GASIFER ELECTRICITY AND STUDY OF WILLINGNESS TO PAY
139
Biomass gasification and in-bed contaminants removal: Performance of iron enriched Olivine and bauxite in a process of steam/O2 gasification
140
Biomass gasification bottom ash as a source of CaO catalyst for biodiesel production via transesterification of palm oil
141
Biomass gasification for decentralized power generation: The Indian perspective
142
Biomass gasification for electricity generation: Review of current technology barriers
143
Biomass gasification for hydrogen production
144
Biomass gasification in a 100 kWth steam-oxygen blown circulating fluidized bed gasifier: Effects of operational conditions on product gas distribution and tar formation
145
Biomass gasification in a circulating fluidized bed
146
Biomass gasification in a downdraft gasifier with a two-stage air supply: Effect of operating conditions on gas quality
147
Biomass gasification in a laboratory-scale AFBG: influence of the location of the feeding point on the fuel-N conversion
148
Biomass gasification in an atmospheric fluidised bed: Tar reduction with experimental iron-based granules from Höganäs AB, Sweden
149
Biomass gasification in an external circulating countercurrent moving bed gasifier
150
Biomass gasification in atmospheric and bubbling fluidized bed: Effect of the type of gasifying agent on the product distribution
151
Biomass gasification in cost-optimized district heating systems—A regional modelling analysis
152
Biomass gasification in district heating systems – The effect of economic energy policies
153
Biomass gasification in near- and super-critical water: Status and prospects
154
Biomass gasification in supercritical water: II. Effect of catalyst
155
Biomass gasification in supercritical water: Part 1. Effect of the nature of biomass
156
Biomass gasification integrated with pyrolysis in a circulating fluidised bed
157
Biomass gasification opportunities in a district heating system
158
Biomass Gasification Process Enhancing using Metal-Organic Frameworks
159
Biomass Gasification Systems and Different Types of Gasifiers, Effective Parameters on Gasification Process Efficiency: An Overview
160
Biomass gasification systems for residential application: An integrated simulation approach
161
Biomass Gasification to Hydrogen and Syngas at Low Temperature: Novel Catalytic System Using Fluidized-Bed Reactor
162
Biomass gasification using capacitively coupled RF plasma technology
163
Biomass gasification: Still promising? A 30-year global overview
164
Biomass gasification—a substitute to fossil fuel for heat application
165
Biomass gasifier based institutional cooking in India: a preliminary financial evaluation
166
Biomass gasifier gas turbine power generating technology
167
Biomass gasifier projects for decentralized power supply in India: A financial evaluation
168
Biomass granular screw feeding: An experimental investigation
169
Biomass growth and activity in a membrane bioreactor with complete sludge retention
170
Biomass growth and element uptake by young trembling aspen in relation to site treatments in Northern Ontario, Canada
171
Biomass Harvesting Guidelines affect downed woody debris retention
172
Biomass Integrated Gasification Combined Cycle for heat and power at ethanol plants
173
Biomass integrated gasification combined cycle with reduced CO2 emissions: Performance analysis and life cycle assessment (LCA)
174
Biomass integrated gasification fuel cell systems–Concept development and experimental results
175
Biomass into chemicals: Conversion of sugars to furan derivatives by catalytic processes Review Article
176
Biomass into chemicals: One pot-base free oxidative esterification of 5-hydroxymethyl-2-furfural into 2,5-dimethylfuroate with gold on nanoparticulated ceria
177
Biomass into chemicals: One-pot two- and three-step synthesis of quinoxalines from biomass-derived glycols and 1,2-dinitrobenzene derivatives using supported gold nanoparticles as catalysts
178
Biomass leachate treatment by reverse osmosis
179
Biomass logistics: Financial & environmental costs. Case study: 2 MW electrical power plants
180
Biomass loss from an anaerobic fluidized bed reactor
181
Biomass losses during harvest and storage of switchgrass
182
Biomass mapping using forest type and structure derived from Landsat TM imagery
183
Biomass market and trade in Norway: Status and future prospects
184
Biomass measurement and monitoring of trees and shrubs in a semi-arid region of central Kenya
185
Biomass monitoring by use of a continuous on-line optical sensor
186
Biomass Nippon Strategy—Why “Biomass Nippon” now?
187
Biomass nutrient profiles of the microalga Porphyridium cruentum
188
Biomass of Antarctic krill in the Scotia Sea in January/February 2000 and its use in revising an estimate of precautionary yield
189
Biomass of Aspergillus Niger: Uses and Applications
190
Biomass of grain sorghum (Sorghum bicolor L. Moench) under variable water regime
191
Biomass of Nematode and Associated Roots: A Determinant of Symptom Production in Root Knot Disease of Rice (Oryza sativa L.)
192
Biomass of Sediment Bacteria by Sedimentation Field-Flow Fractionation
193
Biomass of zooplankton in the eastern Arctic Ocean – A base line study
194
Biomass partitioning and water content relationships at the branch and whole-plant levels and as a function of plant size in Elaeagnus mollis populations in Shanxi, North China
195
BIOMASS PARTITIONING IN CORYMBIA CITRIODORA, EUCALYPTUS CLOEZIANA AND E. DUNNII STOCK PLANTS IN RESPONSE TO TEMPERATURE
196
Biomass partitioning, architecture and turnover of six herbaceous species from habitats with different nutrient supply
197
Biomass partitioning, morphology and water status of four alfalfa genotypes submitted to progressive drought and subsequent recovery
198
Biomass Position for Renewable Energies: Main Ways of Energetic Valorization
199
Biomass position for renewable energies: main ways of energetic valorization
200
Biomass potential in Andalusia, from grapevines, olives, fruit trees and poplar, for providing heating in homes
201
Biomass potentials of miscanthus, willow and poplar: results and policy implications for Eastern Europe, Northern and Central Asia
202
Biomass power cost and optimum plant size in western Canada
203
Biomass power: Exploring the diffusion challenges in Spain
204
Biomass pretreatment strategies via control of rheological behavior of biomass suspensions and reactive twin screw extrusion processing
205
Biomass production and allocation in Jatropha curcas L. seedlings under different levels of drought stress
206
Biomass production and allocation in rice with implications for straw harvesting and utilization
207
Biomass production and bark yield in the plantations of Pteroceltis tatarinowii
208
Biomass production and carbon sequestration potential in poplar plantations with different management patterns
209
Biomass production and detoxification of wastewaters from the olive oil industry by strains of Penicillium isolated from wastewater disposal ponds
210
Biomass production and fatty acid profile of a Scenedesmus rubescens-like microalga
211
BIOMASS PRODUCTION AND FORAGE QUALITY OF HEAD-SMUT DISEASE RESISTANT NAPIER GRASS ACCESSIONS
212
Biomass production and formulation of biocontrol yeast Candida membranifaciens
213
Biomass production and heavy metal content of Rosmarinus officinalis grown on organic waste-amended soil
214
Biomass Production and Lodging Resistance in ‘Leaf Star’, a New Long-Culm Rice Forage Cultivar
215
Biomass production and nitrogen and phosphorus removal by the green alga Neochloris oleoabundans in simulated wastewater and secondary municipal wastewater effluent
216
Biomass production and nutrient concentration of kenaf grown on sewage sludge-amended soil
217
Biomass production and nutrient cycling in Eucalyptus short rotation energy forests in New Zealand.: I: biomass and nutrient accumulation
218
Biomass production and nutrient cycling in Eucalyptus short rotation energy forests in New Zealand: II. Litter fall and nutrient return
219
Biomass production and nutrient recycling through litter from pigeonpea (Cajanus cajan L. Millsp.)
220
Biomass production and nutrients removal by a new microalgae strain Desmodesmus sp. in anaerobic digestion wastewater
221
Biomass production and nutritional levels of berseem (Trifolium alexandrium) grown under elevated CO2
222
Biomass production and nutritional quality of Moringa oleifera as a field crop
223
Biomass production and small-scale testing of freeze-dried lactic acid bacteria starter strains for cassava fermentations
224
Biomass production and soil amelioration in a high density Terminalia arjuna plantation on sodic soils
225
Biomass production and soil nutrients in organic and inorganic fertilized willow biomass production systems
226
Biomass production by novel strains of Yarrowia lipolytica using raw glycerol, derived from biodiesel production
227
BIOMASS PRODUCTION Chlorella vulgaris BUITENZORG USING SERIES OF BUBBLE COLUMN PHOTO BIOREACTOR WITH A PERIODIC ILLUMINATION
228
Biomass production for the removal of heavy metals from aqueous solutions at low pH using growth-decoupled cells of a Citrobacter sp.
229
Biomass production from fermented starch wastewater in photo-bioreactor with internal overflow recirculation
230
Biomass production from glutamate fermentation wastewater by the co-culture of Candida halophila and Rhodotorula glutinis
231
Biomass production from the microalga Phaeodactylum tricornutum: Nutrient stress and chemical composition in exponential fed-batch cultures
232
Biomass production from the U.S. forest and agriculture sectors in support of a renewable electricity standard
233
Biomass production from traditional coppice management in northern Italy
234
Biomass production in an age series of Bambusa bambos plantations
235
Biomass Production in PioneerSpartina anglicaPatches: Evidence for the Importance of Seston Particle Deposition
236
Biomass production in the Central Great Plains USA under various coppice regimes
237
Biomass production of 17 poplar clones in a short-rotation coppice culture on a waste disposal site and its relation to soil characteristics
238
Biomass production of banana plants in the indigenous farming system of the East African Highland: A case study on the Kamachumu Plateau in northwest Tanzania
239
Biomass production of different ecotypes of threegrass species of the semi-arid grasslands of southern Africa
240
Biomass production of four willow clones grown as short rotation coppice on two soil types in Denmark
241
Biomass production of intensively grown poplars in the southernmost part of Sweden: Observations of characters, traits and growth potential
242
Biomass production of papyrus (Cyperus papyrus) in constructed wetland treating low-strength domestic wastewater
243
Biomass production of Salix viminalis in southern Finland and the effect of soil properties and climate conditions on its production and survival
244
Biomass production of Scenedesmus obliquus from mixtures of urban and olive-oil mill wastewaters used as culture medium
245
Biomass production of short-rotation bioenergy hardwood plantations affected by cover crops
246
Biomass production of sugarcane cultivars and early-generation hybrids
247
Biomass production of yeast isolate from salad oil manufacturing wastewater
248
Biomass production potential of grey alder (Alnus incana (L.) Moench.) in Scandinavia and Eastern Europe: A review
249
Biomass production potentials in Central and Eastern Europe under different scenarios
250
Biomass Production System (BPS) plant growth unit Original Research Article
251
Biomass production, water and nitrogen use efficiency in photoperiod-sensitive sorghum in the Texas High Plains
252
Biomass production, water use and photosynthesis of Salix clones grown in a wastewater purification system
253
Biomass productivity and nutrient availability of Cynodon dactylon (L.) Pers. growing on soils of different sodicity stress
254
Biomass productivity and phytoremediation potential of Salix alba and Salix viminalis
255
Biomass productivity and wood energy of Salix species after 2 years growth in SRIC fertilized with wastewater sludge
256
Biomass productivity improvement for eastern cottonwood
257
Biomass properties in association with plant species and assortments I: A synthesis based on literature data of energy properties
258
Biomass properties in association with plant species and assortments. II: A synthesis based on literature data for ash elements
259
Biomass proximate analysis using thermogravimetry
260
Biomass pyrolysis at high temperatures: Prediction of gaseous species yields from an anisotropic particle
261
Biomass pyrolysis experiments in an analytical entrained flow reactor between 1073 K and 1273 K
262
Biomass pyrolysis for power generation — a potential technology
263
Biomass pyrolysis in a circulating fluid bed reactor for the production of fuels and chemicals
264
Biomass pyrolysis in a heated-grid reactor: Visualization of carbon monoxide and formaldehyde using Laser-Induced Fluorescence
265
Biomass pyrolysis in a heated-grid reactor: Visualization of carbon monoxide and formaldehyde using Laser-Induced Fluorescence
266
Biomass pyrolysis kinetics: A comparative critical review with relevant agricultural residue case studies
267
Biomass pyrolysis kinetics: A comparative critical review with relevant agricultural residue case studies
268
Biomass pyrolysis oils for hydrogen production using chemical looping reforming
269
Biomass pyrolysis/gasification for product gas production: the overall investigation of parametric effects
270
Biomass pyrolysis/gasification using three dimensional ordered macroporous (3DOM) Fe2O3 as an oxygen carrier
271
Biomass pyrolysis: Kinetic modelling and experimental validation under high temperature and flash heating rate conditions
272
Biomass pyrolysis: Kinetic modelling and experimental validation under high temperature and flash heating rate conditions
273
Biomass quantification of Andean wetland forages using ERS satellite SAR data for optimizing livestock management
274
Biomass reduction of juvenile birch is more strongly related to stomatal uptake of ozone than to indices based on external exposure
275
Biomass requirements for power production: how to optimise the quality by agricultural management
276
Biomass residues from palm oil mills in Thailand: An overview on quantity and potential usage
277
Biomass resource facilities and biomass conversion processing for fuels and chemicals
278
Biomass resources and their bioenergy potential estimation: A review
279
Biomass resources assessment for power generation: A case study from Haryana state, India
280
Biomass resources for energy in North-Eastern Brazil
281
Biomass resources present in Japan—annual quantities grown, unused and wasted
282
Biomass retention following whole-tree, energy wood harvests in central Maine: Adherence to five state guidelines
283
Biomass round bales infield aggregation logistics scenarios
284
Biomass screw feeding with tapered and extended sections
285
Biomass selection by floods and related timescales. Part 2: Stochastic modeling
286
Biomass selection by floods and related timescales: Part 1. Experimental observations
287
Biomass Size Spectra in Littoral Fishes in Protected and Unprotected Areas in the NW Mediterranean
288
Biomass size spectra of net plankton in the adjacent area near the Yangtze River Estuary in spring
289
Biomass size-spectra of macrobenthic communities in the oxygen minimum zone off Chile
290
Biomass stabilization in the anaerobic digestion of wastewater sludges
291
Biomass steam gasification – an extensive parametric modeling study
292
Biomass steam gasification for production of SNG – Process design and sensitivity analysis
293
Biomass steam gasification in fluidized bed of inert or catalytic particles: Comparison between experimental results and thermodynamic equilibrium predictions
294
Biomass storage for further energy use through biogas production
295
Biomass supply chain design and analysis: Basis, overview, modeling, challenges, and future
296
Biomass supply from alternative cellulosic crops and crop residues: A spatially explicit bioeconomic modeling approach
297
Biomass supply in EU27 from 2010 to 2030
298
Biomass supply schedules for Great Plains delivery points
299
Biomass sustainability and certification
300
Biomass tar recycling and destruction in a CFB gasifier
301
Biomass temperature profile development and its implications under the microwave-assisted pyrolysis condition
302
Biomass to chemicals: Catalytic conversion of glycerol/water mixtures into acrolein, reaction network
303
Biomass to chemicals: Rearrangement of β-pinene epoxide into myrtanal with well-defined single-site substituted molecular sieves as reusable solid Lewis-acid catalysts Original Research Article
304
Biomass to fuel cells state of the art: A review of the most innovative technology solutions
305
Biomass to fuels: A water-free process for biodiesel production with phosphazene catalysts Original Research Article
306
Biomass to hydrogen for the realization of closed cycles of energy resources
307
Biomass to hydrogen via catalytic steam reforming of bio-oil over Ni-supported alumina catalysts
308
Biomass to liquid: A prospective challenge to research and development in 21st century
309
Biomass to methanol via pyrolysis process
310
Biomass to power conversion in a direct carbon fuel cell
311
Biomass toolkit: Modelling for a new age
312
Biomass torrefaction and CO2 capture using mining wastes – A new approach for reducing greenhouse gas emissions of co-firing plants
313
Biomass torrefaction characteristics in inert and oxidative atmospheres at various superficial velocities
314
Biomass torrefaction under different oxygen concentrations and its effect on the composition of the solid by-product
315
Biomass torrefaction under different oxygen concentrations and its effect on the composition of the solid by-product
316
Biomass torrefaction: Modeling of reaction thermochemistry
317
Biomass torrefaction: Modeling of volatile and solid product evolution kinetics
318
Biomass transportation model and optimum plant size for the production of ethanol
319
Biomass upgrading by torrefaction for the production of biofuels: A review
320
Biomass utilisation: A perspective of task X IEA bioenergy agreement 1992–1994
321
Biomass valorisation by staged degasification: A new pyrolysis-based thermochemical conversion option to produce value-added chemicals from lignocellulosic biomass
322
Biomass valorisation by staged degasification: A new pyrolysis-based thermochemical conversion option to produce value-added chemicals from lignocellulosic biomass
323
Biomass waste co-firing with coal applied to the Sines Thermal Power Plant in Portugal
324
Biomass waste-derived activated carbon for the removal of arsenic and manganese ions from aqueous solutions
325
Biomass yield and energy analysis of soybean production in relation to fertilizer-NPK and organic manure
326
Biomass yield and energy balance of a short-rotation poplar coppice with multiple clones on degraded land during 16 years
327
Biomass yield and energy value of some fast-growing multipurpose trees in Nigeria
328
Biomass Yield and Essential Oil Yield Variations in Java Citronella (Cymbopogon winterianus Jowitt.), Intercropped with Food Legumes and Vegetables
329
Biomass yield and nitrogen use efficiency of cellulosic energy crops for ethanol production
330
Biomass yield and nutritional quality of forage species under long-term irrigation with saline-sodic drainage water: Field evaluation
331
Biomass yield and quality of 20 switchgrass populations in southern Iowa, USA
332
Biomass yield and quality of bioenergy crops grown with synthetic and organic fertilizers
333
Biomass yield equations for short rotation black locust plantations in the central Great Plains
334
Biomass yield from an urban landscape
335
Biomass yield from planted mixtures and monocultures of native prairie vegetation across a heterogeneous farm landscape
336
Biomass yield of hybrid varieties of mulberry in a non-moriculture area
337
Biomass yield, energy values, and chemical composition of hybrid poplars in short rotation woody crop production and native perennial grasses in Minnesota, USA
338
Biomass yield, nitrogen response, and nutrient uptake of perennial bioenergy grasses in North Carolina
339
Biomass yields for upland and lowland switchgrass varieties grown in the Mediterranean region
340
Biomass, biochar and hard coal: Data mining application to elemental composition and high heating values prediction
341
Biomass, biochar and hard coal: Data mining application to elemental composition and high heating values prediction
342
Biomass, decomposition and nutrient cycling in a SW Atlantic Sarcocornia perennis marsh
343
Biomass, energy and economic and natural resource differentiation in rural Southern India
344
Biomass, feeding and metabolism of mesozooplankton in the equatorial Pacific along 180°
345
Biomass, grain and energy yield in Cynara cardunculus L. as affected by fertilization, genotype and harvest time
346
Biomass, growth rates and limitation of Equatorial Pacific diatoms
347
Biomass, nutrient and pigment content of beech (Fagus sylvatica) saplings infected with Phytophthora citricola, P. cambivora, P. pseudosyringae and P. undulata
348
Biomass, pyrolysis and combustion
349
Biomass, size structure and depth distributions of the microbial community in the eastern equatorial Pacific
350
Biomass, thermal inertia, and radiative freeze occurrence in leafless forests
351
Biomass, total lipid production, and fatty acid composition of the marine diatom Chaetoceros muelleri in response to different CO2 levels
352
Biomass, vertical distribution and community structure of mesozooplankton in the Sulu Sea and its adjacent waters
353
Biomass-Balance Table for evaluating bioenergy resources
354
Biomass-based energy fuel through biochemical routes: A review
355
Biomass-based hydrogen for oil refining: Integration and performances of two gasification concepts
356
Biomass-based hydrogen production: A review and analysis
357
Biomass-based particles for the formulation of Pickering type emulsions in food and topical applications
358
Biomass-based pyrolytic polygeneration system on cotton stalk pyrolysis: Influence of temperature
359
Biomass-coal co-combustion: opportunity for affordable renewable energy
360
Biomass–density relationships of the seagrass Zostera noltii: A tool for monitoring anthropogenic nutrient disturbance
361
Biomass-derived hierarchical porous CdS/M/TiO2 (M = Au, Ag, pt, pd) ternary heterojunctions for photocatalytic hydrogen evolution
362
Biomass-derived highly porous functional carbon fabricated by using a free-standing template for efficient removal of methylene blue
363
Biomass-derived hydrogen from an air-blown gasifier
364
Biomass-derived, thermally conducting, carbon foams for seasonal thermal storage
365
Biomass-dispersal trade-off and the functional meaning of species diversity
366
Biomass-dispersal trade-off and the functional meaning of species diversity
367
Biomass–Diversity Responses and Spatial Dependencies in Disturbed Tallgrass Prairies
368
Biomasses pyrolysis and combustion kinetics through n-th order parallel reactions
369
Biomass-fired CHP and heat storage system simulations in existing district heating systems
370
Biomass-fired cogeneration systems with CO2 capture and storage
371
Biomass-fired steam power cogeneration system: A theoretical study
372
Biomass-integrated gasification fuel cell systems – Part 1: Definition of systems and technical analysis
373
Biomass-integrated gasification fuel cell systems – Part 2: Economic analysis
374
Biomass-modulated fire dynamics during the Last Glacial–Interglacial Transition at the Central Pyrenees (Spain)
375
Biomass-oil slurry fuels: an investigation into their preparation and formulation
376
Biomass-to-electricity: Analysis and optimization of the complete pathway steam explosion – enzymatic hydrolysis – anaerobic digestion with ICE vs SOFC as biogas users
377
Biomaterial Based Nanocarriers for Delivering Immunomodulatory Agents
378
Biomaterial delivery of morphogens to mimic the natural healing cascade in bone
379
Biomaterial developments for bone tissue engineering
380
Biomaterial film for soluble organic sorption and anti-microbial activity in water environment
381
Biomaterial guides for lymphatic endothelial cell alignment and migration
382
Biomaterial implants mediate autologous stem cell recruitment in mice
383
Biomaterial microarrays: rapid, microscale screening of polymer–cell interaction
384
Biomaterial patches sutured onto the rat stomach induce a set of genes encoding pancreatic enzymes
385
Biomaterial porosity determined by fractal dimensions, succolarity and lacunarity on microcomputed tomographic images
386
Biomaterial regulations for tissue engineering Original Research Article
387
Biomaterial supports for colonic wall defect healing : An experimental study in the rat
388
Biomaterial surface properties modulate in vitro rat calvaria osteoblasts response: Roughness and or chemistry?
389
Biomaterial thin film deposition and characterization by means of MAPLE technique
390
Biomaterial-associated thrombosis: roles of coagulation factors, complement, platelets and leukocytes
391
Biomaterial-induced alterations of human neutrophils under fluid shear stress: scanning electron microscopical study in vitro
392
Biomaterial-mediated delivery of degradative enzymes to improve meniscus integration and repair
393
Biomaterial-mediated retroviral gene transfer using self-assembled monolayers
394
Biomaterial–microvasculature interactions
395
Biomaterials
396
Biomaterials
397
Biomaterials
398
Biomaterials
399
Biomaterials
400
Biomaterials and biotechnology for periodontal tissue regeneration: Recent advances and perspectives
401
Biomaterials and bone mechanotransduction
402
Biomaterials and design in occlusion devices for cardiac defects: A review
403
Biomaterials and implants for orbital floor repair
404
Biomaterials education: a challenge for medicine and industry in the late 1990s
405
Biomaterials education: a challenge for medicine and industry in the late 1990s
406
Biomaterials Electrodes for Degradation of Phenol
407
Biomaterials feel the force
408
Biomaterials for orbital implants and ocular prostheses: Overview and future prospects
409
Biomaterials for stem cell differentiation
410
Biomaterials for the Treatment of Myocardial Infarction Review Article
411
Biomaterials for the Treatment of Myocardial Infarction: A 5-Year Update
412
Biomaterials for tissue engineering and regenerative medicine: Treatment of musculoskeletal injury and disease
413
Biomaterials from blends of fluoropolymers and corn starch—implant and structural aspects
414
Biomaterials in Canada: The first four decades
415
Biomaterials in cardiac tissue engineering: Ten years of research survey
416
Biomaterials in orthopaedic surgery: effects of different hydroxyapatites and demineralized bone matrix on proliferation rate and bone matrix synthesis by human osteoblasts
417
Biomaterials integrated with electronic elements: en route to bioelectronics
418
Biomaterials is this really a field of research?
419
Biomaterials metals and alloys web alert
420
Biomaterials supported CdS nanocrystals
421
Biomaterials used in the posterior segment of the eye
422
Biomaterials with hierarchically defined micro- and nanoscale structure
423
Biomaterials: a forecast for the future
424
Biomaterials: drug delivery systems
425
Biomaterials: surface interactions
426
Biomathematical applications in ruminant nutrition
427
Biomathematics: From Daphnia to Dengue
428
Biomatrix/Polymer Composite Material for Heart Valve Tissue Engineering
429
Biomats, biofilms, and bioglue as preservational agents for arthropod trackways
430
Biome distribution over the last 22,000 yr in China
431
Biome mapping in India using vegetation type map derived using temporal satellite data and environmental parameters
432
Biome mapping in India using vegetation type map derived using temporal satellite data and environmental parameters
433
Biomechanic and histologic analysis of fibroblastic effects of tendon-to-bone healing by transforming growth factor β1 (TGF-β1) in rotator cuff tears
434
Biomechanical adaptation of porcine carotid vascular smooth muscle to hypo and hypertension in vitro
435
Biomechanical adaptations of transtibial amputee sprinting in athletes using dedicated prostheses
436
Biomechanical analyses of paramedics simulating frequently performed strenuous work tasks
437
Biomechanical analyses of whiplash injuries using an experimental model
438
Biomechanical analysis of a novel locking plate with smooth pegs versus a conventional locking plate with threaded screws for proximal humerus fractures
439
Biomechanical analysis of a posterior transfer maneuver on a level surface in individuals with high and low-level spinal cord injuries
440
Biomechanical analysis of ambulatory containment orthoses for perthes disease
441
Biomechanical Analysis of Ankle Force: A Case Study for Instep Kicking
442
Biomechanical analysis of blast-induced traumatic brain injury
443
Biomechanical analysis of bursal-sided partial thickness rotator cuff tears
444
Biomechanical analysis of cages for posterior lumbar interbody fusion
445
Biomechanical Analysis of CNS Gray Matter in Tension and Compression
446
Biomechanical analysis of different types of pedicle screw augmentation: A cadaveric and synthetic bone sample study of instrumented vertebral specimens
447
Biomechanical analysis of differing pedicle screw insertion angles
448
Biomechanical analysis of distal radius fractures using intramedullary Kirschner wires
449
BIOMECHANICAL ANALYSIS OF FEMORAL NECK FRACTURE FIXATION IN SYNTHETIC BONE
450
Biomechanical analysis of gait pattern after anterior cruciate ligament reconstruction
451
Biomechanical Analysis of Grafted and Nongrafted Maxillary Sinus Augmentation in the Atrophic Posterior Maxilla with Three-Dimensional Finite Element Method
452
Biomechanical analysis of isolated type II SLAP lesions and repair
453
Biomechanical analysis of load transmission characteristics of limited carpal fusions used to treat Kienbockʹs disease
454
Biomechanical analysis of long pass in U-19 women football players
455
Biomechanical analysis of Oligochaeta crawling
456
Biomechanical analysis of peak and cumulative spinal loads during simulated patient-handling activities: a substudy of a randomized controlled trial to prevent lift and transfer injury of health care workers
457
Biomechanical analysis of rapid maxillary expansion in the UCLP patient
458
Biomechanical analysis of scapular neck malunion––a simulation study
459
Biomechanical analysis of sit-to-stand movement in normal and obese subjects
460
Biomechanical analysis of sit-to-stand transfer in healthy and paraplegic subjects
461
Biomechanical analysis of stair ambulation in lower limb amputees
462
Biomechanical analysis of stent–oesophagus system
463
Biomechanical analysis of swing-through gait in paraplegic and non-disabled individuals
464
Biomechanical analysis of tendon transfers for massive rotator cuff tears
465
Biomechanical analysis of tension band fixation for olecranon fracture treatment
466
Biomechanical Analysis of the Canine Hind Limb: Calculation of Forces During Three-legged Stance
467
Biomechanical analysis of the dimensions of pilot seats in civil aircraft
468
Biomechanical analysis of the effect of changing patient-handling technique
469
Biomechanical analysis of the effects of implant diameter and bone quality in short implants placed in the atrophic posterior maxilla
470
Biomechanical analysis of the keratoconic cornea
471
Biomechanical analysis of the modified Bristow procedure for anterior shoulder instability: is the bone block necessary?
472
Biomechanical Analysis of the Pelvis Angular Excursion in Sagittal Plane in Response to Asymmetric Leg Loading Tasks in Females with and without Non-specific Chronic Low Back Pain
473
Biomechanical analysis of the Rolled (RLD) leaf phenotype of maize
474
Biomechanical analysis of the shear behaviour adjacent to an axially loaded implant
475
Biomechanical analysis of the stance phase during barefoot and shod running
476
Biomechanical Analysis of Window Configuration of Femur under Different Loading Conditions
477
Biomechanical and anatomical consequences of carpal tunnel release
478
Biomechanical and biochemical characteristics of a human fibroblast-produced and remodeled matrix
479
Biomechanical and biochemical characterization of composite tissue-engineered intervertebral discs
480
Biomechanical and biochemical protective effect of low-level laser therapy for Achilles tendinitis
481
Biomechanical and biochemical weathering of lichen-encrusted granite: textural controls on organic–mineral interactions and deposition of silica-rich layers
482
Biomechanical and computer analysis of radial head prostheses
483
Biomechanical and echocardiographic characterization of flail mitral leaflet due to myxomatous disease: further evidence for early surgical intervention
484
Biomechanical and electromyographic evaluation of ankle foot orthosis and dynamic ankle foot orthosis in spastic cerebral palsy
485
Biomechanical and histological aspects of fracture healing, stimulated with osteogenic protein-1
486
Biomechanical and histological changes in the patellar tendon after in situ freezing : An experimental study in rabbits
487
Biomechanical and histological evaluation of a hydroxyapatite-coated titanium femoral stem fixed with an intramedullary morsellized bone grafting technique: an animal experiment on goats
488
Biomechanical and histological evaluation of abdominal wall compliance with intraperitoneal onlay mesh implants in rabbits: A comparison of six different state-of-the-art meshes
489
Biomechanical and histomorphometric analysis of etched and non-etched resorbable blasting media processed implant surfaces: An experimental study in dogs
490
Biomechanical and histomorphometric investigations on two morphologically differing titanium surfaces with and without fluorohydroxyapatite coating: an experimental study in sheep tibiae
491
Biomechanical and histomorphometric study on the bone–screw interface of bioactive ceramic-coated titanium screws
492
Biomechanical and Histopathological Changes in the Support Structures of Bovine Hooves around the Time of First Calving
493
Biomechanical and metabolic performance of a new orthotic knee joint principle for stance phase safety
494
Biomechanical and microbiological changes in natural hog casings treated with ozone
495
Biomechanical and morphological properties in rat large intestine
496
Biomechanical and perceptual determinants of drawing angles
497
Biomechanical and physiological comparison of conventional webbing and the M83 assault vest
498
Biomechanical and radiological assessment of immediate implants for alveolar ridge preservation
499
BIOMECHANICAL ASPECT OF FELINE DENTAL RESORPTIVE LESIONS FORMATION
500
Biomechanical Aspects of Closing Approaches in Postcarotid Endarterectomy
501
Biomechanical aspects of new techniques in alpine skiing and ski-jumping
502
Biomechanical aspects of plating osteosynthesis of transverse clavicular fracture with and without inferior cortical defect
503
Biomechanical assay of a specially designed insole for plantar fasciitis/heel spur syndrome
504
Biomechanical assessment of brachioradialis pronatorplasty
505
Biomechanical assessment of brachioradialis pronatorplasty
506
Biomechanical Assessment of Cervical Spine with Artificial Disc during Axial Rotation, Flexion and Extension
507
Biomechanical assessment of freeze-dried allograft cortical bone plate graft in canine bone defect model
508
Biomechanical assessment of lifting dynamics, muscle activity and spinal loads while using three different styles of lifting belt
509
Biomechanical assessment of new hand-powered pruning shears
510
Biomechanical assessment of sitting pivot transfer tasks using a newly developed instrumented transfer system among long-term wheelchair users
511
Biomechanical assessment of soft tissue cervical spine disorders and expert opinion in low speed collisions
512
Biomechanical assessment of stability in the metastatic spine following percutaneous vertebroplasty: effects of cement distribution patterns and volume
513
Biomechanical assessment of suture techniques used for tendon repair
514
Biomechanical assessment of suture techniques used for tendon repair
515
Biomechanical assessment of the sitting posture maintenance in patients with stroke
516
Biomechanical Assessment of Three Osteosynthesis Constructs byPeriprosthetic Humerus Fractures
517
Biomechanical assessment of tissue retrieved after in vivo cartilage defect repair: tensile modulus of repair tissue and integration with host cartilage
518
Biomechanical attentions in gait during pregnancy
519
Biomechanical background and clinical observations of rotational malalignment in TKA:: Literature review and consequences
520
Biomechanical Basis of Vascular Tissue Engineering
521
Biomechanical Basis of Vascular Tissue Engineering
522
Biomechanical behavior of atrophic maxillary restorations using the all-on-four concept and long trans-sinus implants: A finite element analysis
523
Biomechanical Behavior of Bioactive Material in Dental Implant: A Three-Dimensional Finite Element Analysis
524
Biomechanical behaviour of bovine temporomandibular articular discs with age
525
Biomechanical behaviour of oesophageal tissues: Material and structural configuration, experimental data and constitutive analysis
526
Biomechanical capabilities influence postural control strategies in the cat hindlimb
527
Biomechanical changes elicited by an anterior cruciate ligament deficiency during steady rate cycling
528
Biomechanical changes in the low back following reduction mammaplasty surgery
529
Biomechanical characteristics investigation on long-term free graft with expanded porcine skin
530
Biomechanical Characteristics of Collagen Fibrils of Human Free Gingival Tissues- Atomic Force Microscope Study
531
Biomechanical characteristics of human trabecular bone
532
Biomechanical characterization and clinical implications of artificially induced crouch walking: Differences between pure iliopsoas, pure hamstrings and combination of iliopsoas and hamstrings contractures
533
Biomechanical characterization and clinical implications of artificially induced toe-walking: Differences between pure soleus, pure gastrocnemius and combination of soleus and gastrocnemius contractures
534
Biomechanical characterization of ascending aortic aneurysm with concomitant bicuspid aortic valve and bovine aortic arch
535
Biomechanical characterization of osseointegration during healing: an experimental in vivo study in the rat
536
Biomechanical characterization of vaginal versus abdominal surgical wound healing in the rabbit
537
Biomechanical comparision of the stable efficacy of two anterior plating systems
538
Biomechanical Comparison Between Bashti Bone Plug Technique and Biodegradable Screw for Fixation of Grafts in Ligament surgery
539
Biomechanical Comparison Between Bashti Bone Plug Technique and Biodegradable Screw for Fixation of Grafts in Ligament surgery
540
Biomechanical comparison between conventional and rapid expansion of skin
541
Biomechanical comparison between fusion of two vertebrae and implantation of an artificial intervertebral disc
542
Biomechanical comparison between lumbar disc arthroplasty and fusion
543
Biomechanical comparison of a proximal humeral locking plate using two methods of head fixation
544
Biomechanical comparison of a unique locking plate versus a standard plate for internal fixation of proximal humerus fractures in a cadaveric model
545
Biomechanical comparison of antirotator compression hip screw and cannulated screw fixations in the femoral neck fractures
546
Biomechanical comparison of different fixations of femur-interlocking-nails
547
Biomechanical comparison of different pin configurations during percutaneous pinning for the treatment of proximal humeral fractures
548
Biomechanical comparison of double-loaded suture anchors using arthroscopic Mason–Allen Stitches versus traditional transosseous suture technique and modified Mason–Allen stitches for rotator cuff repair
549
Biomechanical comparison of extended trochanteric osteotomy and slot osteotomy for femoral component revision in total hip arthroplasty
550
Biomechanical comparison of hard and soft hip protectors, and the influence of soft tissue
551
Biomechanical comparison of headless antegrade screw versus retrograde cortical screw for coronoid fracture fixation
552
Biomechanical comparison of implant retained fixed partial dentures with fiber reinforced composite versus conventional metal frameworks: A 3D FEA study
553
Biomechanical comparison of lesser tuberosity osteotomy versus subscapularis tenotomy in total shoulder arthroplasty
554
BIOMECHANICAL COMPARISON OF MEDIAL VERSUS LATERAL SIDED PLATING IN FEMORAL FRACTURES
555
Biomechanical comparison of median sternotomy closures
556
Biomechanical comparison of metal wire and FiberWire as tension band techniques: an ex vivo study
557
Biomechanical Comparison of Novel Adaptive Swing-Phase Control Mechanical Knee Prostheses with 3R60 and 3R15 in Trans-Femoral Amputees
558
Biomechanical comparison of plating techniques for fractures of the mandibular condyle
559
Biomechanical comparison of pull-out force of unicortical versus bicortical screws in proximal phalanges of the hand: A human cadaveric study
560
Biomechanical comparison of screws and plates for hallux valgus opening-wedge and Ludloff osteotomies
561
Biomechanical comparison of single-row arthroscopic rotator cuff repair technique versus transosseous repair technique
562
Biomechanical comparison of two different periarticular plating systems for stabilization of complex distal humerus fractures
563
Biomechanical comparison of two side plate fixation techniques in an unstable intertrochanteric osteotomy model: Sliding Hip Screw and Percutaneous Compression Plate
564
Biomechanical comparison of two techniques for arthroscopic suprapectoral biceps tenodesis: interference screw versus implant-free intraosseous tendon fixation
565
Biomechanical comparisons of different posterior instrumentation constructs after two-level ALIF: A finite element study
566
Biomechanical consequences of developmental changes in trabecular architecture and mineralization of the pig mandibular condyle
567
Biomechanical consequences of humeral component malpositioning after anatomical total shoulder arthroplasty
568
Biomechanical consideration of total hip arthroplasty following failed fixation of femoral intertrochanteric fractures – A finite element analysis
569
Biomechanical considerations for rehabilitation of the knee
570
Biomechanical considerations of animal models used in tissue engineering of bone
571
Biomechanical design and long-term stability of trees: Morphological and wood traits involved in the balance between weight increase and the gravitropic reaction
572
Biomechanical differences between individuals with chronic ankle instability, copers and healthy controls in the countermovement jump on the force plate
573
Biomechanical differences in landing with and without shoe wear after anterior cruciate ligament reconstruction
574
Biomechanical effect of latissimus dorsi tendon transfer for irreparable massive cuff tear
575
Biomechanical effect of medial cortical support and medial screw support on locking plate fixation in proximal humeral fractures with a medial gap: a finite element analysis
576
Biomechanical effect of mineral heterogeneity in trabecular bone
577
Biomechanical effectiveness of different types of tendon transfers to the shoulder for external rotation
578
Biomechanical effects of a 2 suture-pass medial inter-implant mattress on transosseous-equivalent rotator cuff repair and considerations for a “technical efficiency ratio”
579
Biomechanical effects of daily physical activities on the lower limb
580
Biomechanical effects of humeral neck-shaft angle and subscapularis integrity in reverse total shoulder arthroplasty
581
Biomechanical effects of inflammatory diseases on bone-rheumatoid arthritis as a paradigm
582
Biomechanical effects of intraspecimen variations in tissue modulus for trabecular bone
583
Biomechanical effects of intraspecimen variations in trabecular architecture: a three-dimensional finite element study
584
Biomechanical effects of malposition of tuberosity fragments on the humeral prosthetic reconstruction for four-part proximal humerus fractures
585
Biomechanical Effects of Platform Switching in Two Different Implant Systems: A Three-Dimensional Finite Element Analysis
586
Biomechanical effects of spinal cord compression due to ossification of posterior longitudinal ligament and ligamentum flavum: A finite element analysis
587
Biomechanical effects of titanium implants with full arch bridge rehabilitation on a synthetic model of the human jaw
588
Biomechanical effects, lithological variations, and local pedodiversity in some forest soils of Arkansas
589
Biomechanical evaluation after five and ten millimeter anterior glenohumeral capsulorrhaphy using a novel shoulder model of increased laxity
590
Biomechanical Evaluation and Strength Test of 3D-Printed Foot Orthoses
591
Biomechanical evaluation of a bioresorbable PLA dowel for arthroscopic surgery of the shoulder
592
Biomechanical evaluation of a central rod system in the treatment of scoliosis
593
Biomechanical evaluation of a coracoclavicular and acromioclacicular ligament reconstruction technique utilizing a single continuous intramedullary free tendon graft
594
Biomechanical evaluation of a dynamic pedicle screw fixation device
595
Biomechanical evaluation of a fiber-reinforced composite prosthesis supported by implants with and without a microthread collar design
596
Biomechanical evaluation of a new system to improve screw fixation in osteoporotic bones
597
Biomechanical evaluation of a newly devised model for the elongation-type anterior cruciate ligament injury with partial laceration and permanent elongation
598
Biomechanical evaluation of a novel nucleus pulposus prosthesis in canine cadaveric spines
599
Biomechanical evaluation of a pre-contoured clavicle plate
600
Biomechanical evaluation of a rotator cuff defect model augmented with a bioresorbable scaffold in goats
601
Biomechanical evaluation of assistive devices for transferring residents
602
Biomechanical evaluation of bending strength of spinal pedicle screws, including cylindrical, conical, dual core and double dual core designs using numerical simulations and mechanical tests
603
Biomechanical evaluation of bike power saver
604
biomechanical evaluation of bone quality effect on stresses at bone-implant interface: a finite element study
605
Biomechanical evaluation of braces used for the treatment of epicondylitis
606
Biomechanical Evaluation of Compliance Joint Knee Exoskeleton During Normal Gait
607
Biomechanical evaluation of different designs of glenospheres in the SMR reverse total shoulder prosthesis: Range of motion and risk of scapular notching
608
Biomechanical evaluation of different fixation methods for fracture dislocation involving the proximal tibia
609
Biomechanical evaluation of different internal fixation methods for humerus shaft fractures with medial butterfly fragment
610
Biomechanical evaluation of distal biceps reconstruction with cortical button and interference screw fixation
611
Biomechanical evaluation of external ankle arthrodesis contact area and pressure distribution
612
Biomechanical evaluation of fetal calf skull as a model for testing halo-pin designs for use in children
613
Biomechanical evaluation of four different mattresses
614
Biomechanical evaluation of graft fixation techniques for acromioclavicular joint reconstructions using coracoclavicular tendon grafts
615
Biomechanical evaluation of intra-articular and extra-articular procedures in anterior cruciate ligament reconstruction: A finite element analysis
616
Biomechanical evaluation of locked plating in proximal humeral fractures
617
Biomechanical evaluation of parallel versus orthogonal plate fixation of intra-articular distal humerus fractures
618
Biomechanical evaluation of proximal tibial behavior following unicondylar knee arthroplasty: Modified resected surface with corresponding surgical technique
619
Biomechanical evaluation of rotator cuff repairs in a sheep model: Suture anchors using arthroscopic Mason-Allen stitches compared with transosseous sutures using traditional modified Mason-Allen stitches
620
Biomechanical evaluation of selective dorsal rhizotomy in the reduction of spasticity in children with cerebral palsy: A randomized control trial
621
Biomechanical Evaluation of Spontaneous Repair of Osteochondral Defects in the Rabbit Knee
622
Biomechanical evaluation of subpectoral biceps tenodesis: dual suture anchor versus interference screw fixation
623
Biomechanical Evaluation of Temperature Rising and Applied Force in Controlled Cortical Bone Drilling: An Animal in Vitro Study
624
Biomechanical evaluation of the impact of collared cementless total hip arthroplasty stems on implant subsidence: a cadaveric study in German Shepherd
625
Biomechanical evaluation of the modified double-plating fixation for the distal radius fracture
626
Biomechanical Evaluation of Time as a Golden Measure in the Assessment of Change of Direction Speed Performance
627
Biomechanical evaluation of two commonly used external fixators in the treatment of open subtalar dislocation—A finite element analysis
628
Biomechanical evaluation of two halo pin designs, with, and without, intact periosteum
629
Biomechanical evaluation on tendon reinsertion by comparing trans-osseous suture and suture anchor at different stages of healing: Experimental study on rabbits
630
Biomechanical evidence supporting a differential response to acute ACL injury
631
Biomechanical examination of a commonly used measure of spasticity
632
Biomechanical features of gait waveform data associated with knee osteoarthritis: An application of principal component analysis
633
Biomechanical gait analysis of pigs walking on solid concrete floor
634
Biomechanical Growth Laws for Muscle Tissue
635
Biomechanical implications of angular and torsional deformities in childrenʹs gait
636
Biomechanical implications of knee recurvatum in gait
637
Biomechanical implications of lateral pterygoid contribution to biting and jaw opening in humans
638
Biomechanical implications of the negative heel rocker sole shoe: Gait kinematics and kinetics
639
Biomechanical influences on balance recovery by stepping
640
Biomechanical investigation of ambulatory training in patients with acetabular dysplasia
641
Biomechanical investigation of different internal fixations in medial opening-wedge high tibial osteotomy
642
Biomechanical investigation of pedicle screw–vertebrae complex: a finite element approach using bonded and contact interface conditions
643
Biomechanical investigation of the glenohumeral joint
644
Biomechanical measurements of cortical screw purchase in five types of human and artificial humeri
645
Biomechanical model for appressorial design in Magnaporthe grisea
646
Biomechanical model for the determination of forces on upper-extremity members during standard wheelchair propulsion
647
Biomechanical model for the determination of the forces acting on the finger pulley system
648
Biomechanical model of the human knee evaluated by neuromuscular stimulation
649
Biomechanical model predicting electromyographic activity in three shoulder muscles from 3D kinematics and external forces during cleaning work
650
Biomechanical model study of pelvic belt influence on muscle and ligament forces
651
Biomechanical modeling and optimal control of human posture
652
Biomechanical modeling of hemodynamic factors determining bulging of ventricular aneurysms
653
Biomechanical Modeling of Hip Abduction Exercise Using Optimized Inverse Dynamics
654
Biomechanical modeling of surface wrinkling of soft tissues with growth-dependent mechanical properties
655
Biomechanical modelling of normal pressure hydrocephalus
656
Biomechanical models of hyphal growth in actinomycetes
657
Biomechanical optimization of orthopedic footwear for diabetic patients using in-shoe plantar pressure measurement
658
Biomechanical outcome of proximal femoral nail antirotation is superior to proximal femoral locking compression plate for reverse oblique intertrochanteric fractures: a biomechanical study of intertrochanteric fractures
659
Biomechanical Performance of Menisci under Cyclic Loads
660
Biomechanical performance of subpectoral biceps tenodesis: a comparison of interference screw fixation, cortical button fixation, and interference screw diameter
661
Biomechanical performance of the new BeadEx implant in the treatment of osteoporotic vertebral body compression fractures: Restoration and maintenance of height and stability
662
Biomechanical predictors of retrospective tibial stress fractures in runners
663
Biomechanical properties and large strain deformation of artificial silicone devices with different forms of nanostructured carbon
664
Biomechanical properties in titanium implants with integrated maintenance free shock absorbing elements
665
Biomechanical properties of an advanced new carbon/flax/epoxy composite material for bone plate applications
666
Biomechanical properties of an intact, injured, repaired, and healed femur: An experimental and computational study
667
Biomechanical Properties of Bovine Claw Horn
668
Biomechanical properties of ciprofloxacin loaded bone cement
669
Biomechanical properties of high-toughness double network hydrogels
670
Biomechanical properties of human os calcanei: relationships with bone density and fractal evaluation of bone microarchitecture
671
Biomechanical properties of muscle-tendon unit under high-speed passive stretch
672
Biomechanical properties of nano-TiO2 addition to a medical silicone elastomer: The effect of artificial ageing
673
Biomechanical properties of nano-TiO2 addition to a medical silicone elastomer: The effect of artificial ageing
674
Biomechanical properties of normal tendons, normal palmar aponeuroses, and tissues from patients with Dupuytrenʹs disease subjected to elastase and chondroitinase treatment
675
Biomechanical properties of oesophagus wall under loading
676
Biomechanical properties of skin in vitro for different expansion methods
677
Biomechanical properties of tendons during lower-leg lengthening in dogs using the Ilizarov method
678
Biomechanical properties of the costovertebral joint
679
Biomechanical properties of the crimp grip position in rock climbers
680
Biomechanical properties of the layered oesophagus and its remodelling in experimental type-1 diabetes
681
Biomechanical properties of the mandible, as assessed by bending test, in rats fed a low-quality protein
682
Biomechanical properties of the reproductive shoots of eelgrass
683
Biomechanical properties of the superficial fascial system
684
Biomechanical properties of the triceps surae muscle after limb lengthening
685
Biomechanical properties of thin skin flap after basic fibroblast growth factor (bFGF) administration
686
Biomechanical properties of triceps brachii tendon after in vitro simulation of different posterior surgical approaches
687
Biomechanical pulping of softwood with enzymes and white-rot fungus Physisporinus rivulosus
688
Biomechanical quality of trabecular bone. A new method
689
Biomechanical quantification of projectile penetration using experimental head models can enhance the understanding of civilian ballistic brain injury and advance treatment. Two of the most commonly used handgun projectiles (25-cal, 275 m/s and 9 mm, 395
690
Biomechanical rationale of ossification of the secondary ossification center on apophyseal bony ring fracture: A biomechanical study
691
Biomechanical relevance of glenoid component positioning in the reverse Delta III total shoulder prosthesis
692
Biomechanical Remodeling of the Microenvironment by Stromal Caveolin-1 Favors Tumor Invasion and Metastasis
693
Biomechanical response of a mandible in a patient affected with hemifacial microsomia before and after distraction osteogenesis
694
Biomechanical response of arterial wall to DOCA–salt hypertension in growing and middle-aged rats
695
Biomechanical response of bovine temporomandibular joint disc to prolonged tensile stress
696
Biomechanical response of collagen fascicles to restressing after stress deprivation during culture
697
Biomechanical response of the human mandible to impacts of the chin
698
Biomechanical response of the passive human knee joint under anterior-posterior forces
699
Biomechanical response of the pubic symphysis in lateral pelvic impacts: A finite element study
700
Biomechanical responses due to discitis infection of a juvenile thoracolumbar spine using finite element modeling
701
Biomechanical responses of the intervertebral joints to static and vibrational loading: a finite element study
702
Biomechanical risk factors for occupationally related low back disorders : W. S. Marras, S. A. Lavender, S. E. Leurgans, F. A. Fathallah, S. A. Ferguson, G. Allread, & S. L. Rajulu, Ergonomics, 38(2), 377–410
703
Biomechanical robustness of a new proximal epiphyseal hip replacement to patient variability and surgical uncertainties: A FE study
704
Biomechanical similarities among subscapularis repairs after shoulder arthroplasty
705
Biomechanical simulation of manual lifting using spacetime optimization
706
Biomechanical simulations of forward fall arrests: effects of upper extremity arrest strategy, gender and aging-related declines in muscle strength
707
Biomechanical simulations of scoliotic spine correction due to prone position and anaesthesia prior to surgical instrumentation
708
Biomechanical stability of high tibial opening wedge osteotomy: Internal fixation versus external fixation
709
Biomechanical Stability of Two Different Maxillofacial Screws in a Rabbit Model
710
Biomechanical strain regulates TNFR2 but not TNFR1 in TMJ cells
711
Biomechanical strategies for successful obstacle crossing with the trailing limb in older adults with medial compartment knee osteoarthritis
712
Biomechanical strength of deep-frozen versus lyophilized large cortical allografts
713
Biomechanical stress maps of an artificial femur obtained using a new infrared thermography technique validated by strain gages
714
Biomechanical structure of sprint start and effect of biological feedback methods on sprint start performance
715
Biomechanical studies of the foot — research and clinical applications
716
Biomechanical studies of the remodeling of knee joint tendons and ligaments
717
Biomechanical studies on cervical total disc arthroplasty: A literature review
718
Biomechanical study of a Poly-L-Lactide (PLLA) sternal pin in sternal closure after cardiothoracic surgery
719
Biomechanical study of a prosthetic solution based on an angled abutment: Case of upper lateral incisor
720
Biomechanical study of expandable pedicle screw fixation in severe osteoporotic bone comparing with conventional and cement-augmented pedicle screws
721
Biomechanical study of mandible bone supporting a four-implant retained bridge: Finite element analysis of the influence of bone anisotropy and foodstuff position
722
Biomechanical study of prophylactic internal fixation of the radial osteocutaneous donor site using the sheep tibia model
723
Biomechanical Study of Sternal Closure Using Rigid Fixation Techniques in Human Cadavers
724
Biomechanical study of stress in the fifth metatarsal
725
Biomechanical study of tarsometatarsal joint fusion using finite element analysis
726
Biomechanical study of the edge outgrowth phenomenon of encapsulated chondrocytic isogenous groups in the surface layer of hydrogel scaffolds for cartilage tissue engineering
727
Biomechanical study of the effect of platelet rich plasma on the treatment of medial collateral ligament lesion in rabbits
728
Biomechanical study of the funnel technique applied in thoracic pedicle screw replacement
729
Biomechanical study on femoral neck fracture fixation in relation to bone mineral density
730
Biomechanical study on the effect of twisted human patellar tendon
731
Biomechanical Study Using the Finite Element Method of Internal Fixation in Pauwels Type III Vertical Femoral Neck Fractures
732
Biomechanical testing and degradation analysis of MgCa0.8 alloy screws: A comparative in vivo study in rabbits
733
Biomechanical testing in experimental bone interventions—May the power be with you
734
Biomechanical testing of a new knotless suture anchor compared with established anchors for rotator cuff repair
735
Biomechanical testing of small versus large lesser tuberosity osteotomies: effect on gap formation and ultimate failure load
736
Biomechanical Testing of the Cairo Anterior Spinal Fixation System (CSS)
737
Biomechanical transformation of the gastrocnemius muscle by injection of botulinum toxin a and casting in ambulant children with cerebral palsy
738
Biomechanical transformation of the gastrosoleus muscle by injection of botulinum toxin A in ambulant children with cerebral palsy
739
Biomechanically inspired modelling of pedestrian-induced forces on laterally oscillating structures
740
Biomechanics Analysis for Dominant Leg During Instep Kicking
741
Biomechanics and anatomy of cladode junctions for two Opuntia (Cactaceae) species and their hybrid
742
Biomechanics and anatomy of Lycopersicon esculentum fruit peels and enzyme-treated samples
743
Biomechanics and biophysics of cancer cells
744
Biomechanics and biophysics of cancer cells Original Research Article
745
Biomechanics and electromyography of a cumulative lumbar disorder: response to static flexion
746
Biomechanics and muscle coordination of human walking: Part I: Introduction to concepts, power transfer, dynamics and simulations
747
Biomechanics and muscle coordination of human walking: Part II: Lessons from dynamical simulations and clinical implications
748
Biomechanics and physiology in active manual wheelchair propulsion
749
Biomechanics approaches to studying human diseases
750
BIOMECHANICS DEFORMATION AND STRAIN MEASUREMENTS WITH 3D IMAGE CORRELATION PHOTOGRAMMETRY
751
Biomechanics for Orthodontic Intrusion of Severely Extruded Maxillary Molars for Functional Prosthetic Rehabilitation
752
Biomechanics in the musculoskeletal system : Manohar M. Panjabi, Augustus A. White (Eds.); Harcourt Health Sciences, 2001, pp. 224, price $59.00, ISBN 0-443-06585-3
753
Biomechanics of abdominal aortic aneurysm
754
BIOMECHANICS OF BONE BLOCK GRAFT MODELS OF DIFFERENT GEOMETRY
755
Biomechanics of brain tissue
756
Biomechanics of cell rolling: shear flow, cell-surface adhesion, and cell deformability
757
Biomechanics of cellular solids
758
Biomechanics of coracoacromial arch modification
759
Biomechanics of descending ramps
760
Biomechanics of fall arrest using the upper extremity: age differences
761
Biomechanics of first ray hypermobility: An investigation on joint force during walking using finite element analysis
762
Biomechanics of gait in Charcot-Marie Tooth disease
763
Biomechanics of Gait in the Elderly: A Literature Review
764
Biomechanics of human quadriceps muscles during electrical stimulation
765
Biomechanics of knee ligament healing, repair and reconstruction
766
Biomechanics of knee ligaments: injury, healing, and repair
767
Biomechanics of longitudinal arch support mechanisms in foot orthoses and their effect on plantar aponeurosis strain
768
Biomechanics of manual material handling through simulation: Computational aspects
769
Biomechanics of microscopic appendages: functional shifts caused by changes in speed
770
Biomechanics of open Bankart and coracoid abutment procedures in a human cadaveric shoulder model
771
Biomechanics of orthotic management of gait in spastic diplegia
772
Biomechanics of Plant Roots: estimating Localised Deformation with Particle Image Velocimetry
773
Biomechanics of recumbent cycling in adolescents with cerebral palsy with and without the use of a fixed shank guide
774
Biomechanics of side impact: Injury criteria, aging occupants, and airbag technology
775
Biomechanics of single cortical neurons
776
Biomechanics of single zonal chondrocytes
777
Biomechanics of stairway walking
778
Biomechanics of temporo-parietal skull fracture
779
Biomechanics of tendon injury and repair
780
Biomechanics of the ankle joint and clinical outcomes of total ankle replacement
781
Biomechanics of the brain: A theoretical and numerical study of Biotʹs equations of consolidation theory with deformation-dependent permeability
782
Biomechanics of the cervical spine 4: major injuries
783
Biomechanics of the cervical spine Part 2. Cervical spine soft tissue responses and biomechanical modeling
784
Biomechanics of the cervical spine Part 3: minor injuries
785
Biomechanics of the cervical spine. I: Normal kinematics
786
Biomechanics of the Cricoarytenoid Joint: Three-Dimensional Imaging and Vector Analysis
787
Biomechanics of the Distal Interphalangeal Joint
788
Biomechanics of the double rocker sole shoe: Gait kinematics and kinetics
789
Biomechanics of the foot in rheumatoid arthritis: Identifying abnormal function and the factors associated with localised disease ‘impact’
790
Biomechanics of the foot in rheumatoid arthritis: Identifying abnormal function and the factors that predict disease impact
791
Biomechanics of the heel pad for type 2 diabetic patients
792
Biomechanics of the hindfoot joints in response to degenerative hindfoot arthrodeses
793
Biomechanics of the hip joint capsule —a mathematical model and clinical implications
794
Biomechanics of the knee: methodological considerations in the in vivo kinematic analysis of the tibiofemoral and patellofemoral joint
795
Biomechanics of the lower limb in patients with anterlor knee pain
796
Biomechanics of the musculo-skeletal system : Edited by Benno M. Nigg and Walter Herzog Chichester, U.K., 1994, 578 pp., ISBN: 0-471-944440
797
Biomechanics of the Musculo-Skeletal System 2nd edition.,: Benno M. Nigg and Walter Herzog (Eds.); Wiley, Chichester, UK, 1999, 643 pages, price $60.00, ISBN: 0-471-97818-3
798
Biomechanics of the rabbit knee and ankle: Muscle, ligament, and joint contact force predictions
799
Biomechanics of the stick insect antenna: Damping properties and structural correlates of the cuticle
800
Biomechanics of the upper limb using robotic techniques
801
Biomechanics of traumatic brain injury Original Research Article
802
Biomechanics of vertebral level, geometry, and transcortical tumors in the metastatic spine
803
Biomechanics Strategies for Space Closure in Deep Overbite
804
Biomechanics: principles and applications: D.J. Schneck and J.D. Bronzino (Eds.); CRC Press, Boca Raton, FL, 2002, 300pp., ISBN 0-8493-1492-5
805
Bio-Mechanism Inhibitory Prediction of β-Sitosterol from Kemangi (Ocimum basilicum L.) as an Inhibitor of MurA Enzyme of Oral Bacteria: In vitro and in silico Study
806
Biomediated reinforcement of weathered calcareous stones
807
Bio-mediated synthesis of TiO2 nanoparticles and its photocatalytic effect on aquatic biofilm
808
Biomedic Organizations: An intelligent dynamic architecture for KDD
809
Biomedical academic entrepreneurship through the SBIR program
810
Biomedical active segmentation guided by edge saliency
811
Biomedical Application of a Novel Nanostructured-based Electrochemical Platform for Therapeutic Monitoring of an Antiepileptic Drug; Gabapentin
812
Biomedical applications of a new portable Raman imaging probe
813
Biomedical applications of an imaging silicon pixel array (ISPA) tube
814
Biomedical applications of an imaging silicon pixel array (ISPA) tube
815
Biomedical applications of batteries
816
Biomedical applications of boronic acid polymers
817
Biomedical applications of carboxymethyl chitosans
818
Biomedical applications of chitin and chitosan based nanomaterials—A short review
819
Biomedical applications of chitin hydrogel membranes and scaffolds
820
Biomedical applications of diamond-like carbon (DLC) coatings: A review
821
Biomedical applications of distally controlled magnetic nanoparticles
822
Biomedical applications of functionalised carbon nanotubes
823
Biomedical Applications of Nanotechnology
824
Biomedical applications of polymer-composite materials: a review
825
Biomedical applications of sheep models: from asthma to vaccines
826
Biomedical characteristics of nine year old school children and their relationship with familiar risk factors for obesity and cardiovascular disease
827
Biomedical coatings on magnesium alloys – A review
828
Biomedical databases: protecting privacy and promoting research Original Research Article
829
Biomedical Device-Associated Infections in Surgical-Critical Care Patients
830
Biomedical Discovery with DNA Arrays
831
Biomedical engineering: the career of choice
832
Bio-medical entity extraction using support vector machines
833
Biomedical Ethics Teachings to Postgraduate Doctors
834
Biomedical events extraction using the hidden vector state model
835
Biomedical features of flaxseed against different pathologic situations: A narrative review
836
Biomedical Functions and Biotechnology of Natural and Artificial Polymers (Frontiers in Biomedicine and Biotechnology, Vol. 3): Edited by Manssur Yalpani, ATL Press, Shrewsbury, MA, USA, 1996. ISBN 1-882360-02-8, 296 pp (including index), $225.00 (clothbo
837
Biomedical HIV prevention—and social science
838
Biomedical Image Denoising Based on Hybrid Optimization Algorithm and Sequential Filters
839
Biomedical imaging center in SPring-8
840
Biomedical imaging center in SPring-8
841
Biomedical imaging using hyperpolarized noble gas MRI: Pulse sequence considerations
842
Biomedical imaging using hyperpolarized noble gas MRI: Pulse sequence considerations
843
Biomedical implications of information processing in chemical systems: Non-classical approach to photochemistry of coordination compounds
844
Biomedical innovation at the laboratory, clinical and commercial interface: A new method for mapping research projects, publications and patents in the field of microarrays
845
Biomedical instrumentation based on piezoelectric ceramics
846
Biomedical interventions to prevent HIV infection: evidence, challenges, and way forward
847
Biomedical investigation of CNT based coatings
848
Biomedical investigations on CNx coating
849
Biomedical labs are small worlds with a difference
850
Biomedical micro- and nano-technology
851
Biomedical microdevices and nanotechnology
852
Biomedical microsystems for minimally invasive diagnosis and treatment
853
Biomedical nanotechnology for active drug delivery systems by applying sugar-chain molecular functions
854
Biomedical Potential and Preliminary Phytochemistry of the Brown Seaweed Sargassum wightii Greville ex J. Agardh 1848
855
Biomedical potential of the reactive oxygen species generation and quenching by fullerenes (C60)
856
Biomedical production of implants by additive electro-chemical and physical processes
857
Biomedical properties of saffron and its potential use in cancer therapy and chemoprevention trials
858
Biomedical publication—global profile and trend
859
Biomedical Publications and the Web: Status Report
860
Biomedical publications in an unstable region: the Arab world, 1988–2002
861
Biomedical Publications Profile and Trends in Gulf Cooperation Council Countries
862
Biomedical Relation Extraction Using Distant Supervision
863
Biomedical research with heavy ions at the IMP accelerators Original Research Article
864
Biomedical research: crossing the 1 s Rubicon
865
Biomedical response of tantalum oxide films deposited by DC reactive unbalanced magnetron sputtering
866
Biomedical science and technology in China
867
Biomedical science matters for people—so its impact should be better assessed
868
Biomedical scientistsʹ perception of the social sciences in health research
869
Biomedical Scope of Gold Nanoparticles in Medical Sciences; an Advancement in Cancer Therapy
870
Biomedical sensor using thick film technology for transcutaneous oxygen measurement
871
Biomedical solid waste management in an Indian hospital: a case study
872
Biomedical surface science: Foundations to frontiers
873
Biomedical technology and devices handbook, James Moore, George Zouridakis, eds., CRC Press, 2003.
874
Biomedical Text Categorization Based on Ensemble Pruning and Optimized Topic Modelling
875
Biomedical text summarization to support genetic database curation: using Semantic MEDLINE to create a secondary database of genetic information
876
Bio-medical Topoi—the dominance of space, the recalcitrance of place, and the making of persons
877
Biomedical visual data analysis to build an intelligent diagnostic decision support system in medical genetics
878
Biomedical waste analysis in the rural area of Warananagar-Kodoli, Maharashtra, India
879
Biomedical Waste and COVID-19 in India and the World: Are We Ready?
880
Biomedical waste disposal systems of health facilities in Ethiopia
881
Biomedical waste management in nursing homes and smaller hospitals in Delhi
882
biomedical waste management practices in health centers in chandigarh, india
883
Biomedical waste management practices in health centers in Chandigarh, India
884
Bio-Medical Waste Management Processes and Practices Adopted by select Hospitals in Pune
885
Bio-medical X-ray imaging with spectroscopic pixel detectors
886
Bio-medical X-ray imaging with spectroscopic pixel detectors
887
Biomedical-related special issue
888
Biomedicine
889
Biomedicine and the humanities
890
Biomedicine and the Semantic Web: A Knowledge Model for Visual Phenotype
891
Biomedicine globalized and localized: western medical practices in an outpatient clinic of a Mexican hospital
892
Biomedicines to reduce inflammation but not viral load in chronic HCV – whatʹs the sense?
893
Bio-medicus centrifugal ventricular support for postcardiotomy cardiac failure: A review of 129 cases
894
BioMedNet: singular resource for physicians and scientists
895
Biomembrane Interactions Reveal the Mechanism of Action of Surface-Immobilized Host Defense IDR-1010 Peptide Original Research Article
896
BioMEMS and biomedical nanotechnology
897
BioMEMS for drug delivery
898
BioMEMS in drug delivery
899
BioMen: an information system to herbarium
900
Biome-scale characterisation and differentiation of semi-arid and arid zone soil organic matter compositions using pyrolysis–GC/MS analysis
901
Biometeorology and recreation in east Mediterranean forests
902
Biomethanation of banana peel and pineapple waste
903
Biomethanation of brewery wastewater using an anaerobic upflow blanket filter
904
Biomethanation of poultry litter leachate in UASB reactor coupled with ammonia stripper for enhancement of overall performance
905
Biomethanation of tobacco waste Original Research Article
906
Biomethanation potential of macroalgae Ulva spp. and Gracilaria spp. and in co-digestion with waste activated sludge
907
Biomethanation under psychrophilic conditions: a review
908
Biomethane CNG hybrid: A reduction by more than 80% of the greenhouse gases emissions compared to gasoline
909
Biomethane in the transport sector—An appraisal of the forgotten option
910
Biomethane potential of the POME generated in the palm oil industry in Ghana from 2002 to 2009
911
Biomethane production by anaerobic digestion of organic waste
912
Biomethane production from different crop systems of cereals in Northern Italy
913
Biomethane production from maize and liquid cow manure – Effect of share of maize, post-methanation potential and digestate characteristics
914
Bio-methane via fast pyrolysis of biomass
915
Biomethanization
916
Biomethanization of municipal solid waste in a pilot plant
917
Biomethanization of orange peel waste
918
Biomethanization of waste derived from strawberry processing: advantages of pretreatment
919
Biomethanol production from gasification of non-woody plant in South Africa: Optimum scale and economic performance
920
Biomethylation of Selenium and Tellurium: Microorganisms and Plants
921
Biometric analyses as a tool for the differentiation of two coccolith species of the genus Crepidolithus (Pliensbachian, Lower Jurassic) in the Basque-Cantabrian Basin (Northern Spain)
922
Biometric Analysis of C-shaped Root Canals in Mandibular Second Molars Using Cone-Beam Computed Tomography
923
Biometric Analysis of Hunteria umbellata (K.Schum.) Hallier f and Metformin in the treatment of diabetes
924
Biometric analysis of Pliensbachian-Toarcian (Lower Jurassic) coccoliths of the family Biscutaceae: intra- and interspecific variability versus palaeoenvironmental influence
925
Biometric and eddy covariance-based assessment of decadal carbon sequestration of a temperate Scots pine forest
926
Biometric and eddy-covariance based estimates of annual carbon storage in five eastern North American deciduous forests
927
Biometric and eddy-covariance based estimates of carbon fluxes in an age-sequence of temperate pine forests
928
Biometric and eddy-covariance-based estimates of carbon balance for a warm-temperate mixed forest in Japan
929
Biometric and morphometric approaches on Lower Hettangian dinosaur footprints from the Rodez Strait (Aveyron, France)
930
Biometric and Ultrasonographic Evaluation of the Testis of One-humped Camel (Camelus dromedarius)
931
Biometric Authentication of Fingerprint for Banking Users, Using Stream Cipher Algorithm
932
Biometric Authentication Systems: Religious Ideology and Implications For Human Capital Development
933
Biometric authentication using finger nail plates
934
Biometric based estimates of net primary production (NPP) in a cool-temperate deciduous forest stand beneath a flux tower
935
Biometric borders: Governing mobilities in the war on terror
936
Biometric cryptosystem based on discretized fingerprint texture descriptors
937
Biometric cryptosystem using function based on-line signature recognition
938
Biometric cryptosystems: issues and challenges
939
Biometric dispersion matcher
940
BIOMETRIC IDENTITY CARDS AS A TOOL FOR E-GOVERNANCE IN SULTANATE OF OMAN
941
Biometric Indicators, Testicular Parameters and Semen Characteristics in Peripubertal and Postpubertal Pleven Blackhead Rams
942
Biometric Indices and Condition factors of Pomadasys jubelini (Cuvier, 1830) from Obuama Creek, Nigeria
943
Biometric Indices and Their Relation with Age, Sex and Ethnicity
944
Biometric iris recognition system using a fast and robust iris localization and alignment procedure
945
Biometric parameters of the redline torpedo fish Puntius denisonii Day 1865, an endemic barb in the Western Ghats hotspots of Southern India
946
Biometric perils and patches
947
Biometric recognition using online uppercase handwritten text
948
Biometric relationships in earthworms (Oligochaeta)
949
Biometric Relationships of the Pool Barb Puntius sophore (Hamilton 1822) (Cyprinidae) from Three Major Rivers of Bangladesh
950
Biometric Relationships of Villorita cyprinoides (Gray) from Vembanad Lake, Kerala, India
951
Biometric sample characterization Part I: The influence of the infestation with insects to element concentrations in spruce needles
952
Biometric sample characterization Part II: The relation between the size of needles and concentrations of airborne pollutants
953
Biometric scores fusion based on total error rate minimization
954
Biometric Security for Cell Phones
955
Biometric Signature Verification Using Pen Position, Time, Velocity and Pressure Parameters
956
Biometric Standards — An Overview
957
Biometric standards and methods
958
Biometric System for User Authentication Based On Hough Transform and Neural Network
959
Biometric template selection and update: a case study in fingerprints
960
Biometric Variability of Arabia Goat in Laghouat (Algeria) Using the Mean of the Principal Component Analysis
961
Biometric variation in Phragmites australis affecting convective ventilation and amino acid metabolism
962
Biometric worst-case scenarios for multi-state life insurance policies
963
Biometric, microstructural, and high-resolution trace element studies in Crassostrea gigas of Cantabria (Bay of Biscay, Spain): Anthropogenic and seasonal influences
964
Biometric, nutritional and sensory changes in intensively farmed Murray cod (Maccullochella peelii peelii, Mitchell) following different purging times
965
Biometrical analysis of resistance to stem rust (Puccinia graminis f. sp. tritici) in the winter wheat genotypes
966
Biometrical characters of Artemia from four Iranian regions
967
Biometrical Models Based Assessment of Genotype x Environment Interaction of Regional Cotton Yield Trails
968
BIOMETRICAL, GRAVIMETRICAL AND BIOCHEMICAL DATA IN THREE SUMMER-OLD CTENOPHARYNGODON IDELLA SPECIES
969
Biometrics — A civil liberties and privacy perspective
970
Biometrics and identity management for homeland security applications in Saudi Arabia
971
Biometrics and Turingʹs legacy
972
Biometrics break-ins and band-aids
973
Biometrics in Laminaria digitata: A useful tool to assess biomass, carbon and nitrogen contents
974
Biometrics: security: An end user perspective
975
Biometry and Formula Accuracy With Intraocular Lene Ued for Cataract urgery in Extreme Hyperopia Original Reearch Article
976
Biometry and reproductive biology of Pseudonereis anomala Gravier 1901 (Polychaeta: Nereididae) on the Alexandria coast, Egypt
977
Biometry of Emiliania huxleyi and its biostratigraphic significance in the Eastern North Atlantic Ocean and Western Mediterranean Sea in the last 20 000 years
978
BIOMETRY OF FRUITS AND SEEDS OF Hancornia speciosa Gomes (APOCYNACEAE) IN NATURAL POPULATIONS
979
Biometry of the Late Cretaceous Arkhangelskiella group: ecophenotypes controlled by nutrient flux
980
Biometry, Biometrics, Biostatistics, Bioinformatics, … , Bio-X
981
Biomicrofibrilar composites of high density polyethylene reinforced with curauá fibers: Mechanical, interfacial and morphological properties
982
Biomimetic accumulation of PAHs from soils by triolein-embedded cellulose acetate membranes (TECAMs) to estimate their bioavailability
983
Biomimetic acellular detoxified glutaraldehyde cross-linked bovine pericardium for tissue engineering
984
Biomimetic affinity purification of Candida antarctica lipase B
985
Biomimetic alginate/polyacrylamide porous scaffold supports human mesenchymal stem cell proliferation and chondrogenesis
986
Biomimetic amphiphiles: Biosurfactants
987
Biomimetic and electrolytic calcium phosphate coatings on titanium alloy: physicochemical characteristics and cell attachment
988
Biomimetic apatite coating on biomorphous alumina scaffolds
989
Biomimetic apatite coating on P(EMA-co-HEA)/SiO2 hybrid nanocomposites
990
Biomimetic apatite coatings on micro-arc oxidized titania
991
Biomimetic apatite deposited on microarc oxidized anatase-based ceramic coating
992
Biomimetic apatite formation on a CoCrMo alloy by using wollastonite, bioactive glass or hydroxyapatite
993
Biomimetic apatite formation on calcium phosphate-coated titanium in Dulbecco’s phosphate-buffered saline solution containing CaCl2 with and without fibronectin
994
Biomimetic apatite formation on chemically treated titanium
995
Biomimetic apatite formation on polyethylene photografted with vinyltrimethoxysilane and hydrolyzed
996
Biomimetic apatite induction of P-containing titania formed by micro-arc oxidation before and after hydrothermal treatment
997
Biomimetic apatite induction on Ca-containing titania
998
Biomimetic apatite layers on plasma-sprayed titanium coatings after surface modification
999
Biomimetic apatite sintered at very low temperature by spark plasma sintering: Physico-chemistry and microstructure aspects
1000
Biomimetic apatite-coated porous PVA scaffolds promote the growth of breast cancer cells
