ليست عنوان مقالات لاتين Dry atmospheric deposition and diazotrophy as sources of new nitrogen to northwestern Mediterranean oligotrophic surface waters Dual analysis for path integrals and bounds for crack parameter

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Dry atmospheric deposition and diazotrophy as sources of new nitrogen to northwestern Mediterranean oligotrophic surface waters

2

Dry atmospheric deposition rates of metals along a coastal transect in southern California

3

Dry atmospheric fluxes of trace metals (Al, Fe, Mn, Pb, Cd, Zn, Cu) over the Levantine Basin: A refined assessment

4

Dry atmospheric inputs of trace metals at the Mediterranean coast of Israel (SE Mediterranean): sources and fluxes

5

Dry bag isostatic pressing for improved green strength of surrogate nuclear fuel pellets

6

Dry Bean Intake of Women Ages 19-45

7

Dry Bean Production in Zero and Conventional Tillage

8

Dry beneficiation of Slovakian coal

9

Dry beneficiation technology of coal with an air dense-medium fluidized bed

10

Dry boards as load bearing element in the profiled steel sheet dry board floor panel system—structural performance and applications

11

Dry catalyst impregnation in a double cone blender: A computational and experimental analysis

12

Dry catalytic partial oxidation of diesel–fuel distillates into syngas

13

Dry citrate-precursor synthesized nanocrystalline cobalt oxide as highly active catalyst for total oxidation of propane

14

Dry cleaning for metallic contaminants removal as the second cleaning process after the CMP process

15

Dry cleaning of metal surfaces by a vacuum arc

16

Dry climate near the Western Pacific Warm Pool: Pleistocene caliches of the Nansha Islands, South China Sea

17

Dry coastal ecosystems. Ecosystems of the world, volumes 2A and 2B: E. van der Maarel (Editor). Elsevier, Amsterdam, 1993. Vol. 2A: Dfl. 430, ISBN 0-444-87348-1, 600 pp. Vol. 2B: Dfl. 470, ISBN 0-444-87349-X, 664 p

18

Dry coastal ecosystems. Ecosystems of the world, volumes 2A and 2B: E. van der Maarel (Editor). Elsevier, Amsterdam, 1993. Vol. 2A: Dfl. 430, ISBN 0-444-87348-1, 600 pp. Vol. 2B: Dfl. 470, ISBN 0-444-87349-X, 664 p

19

Dry coastal ecosystems. Ecosystems of the world, volumes 2A and 2B: E. van der Maarel (Editor). Elsevier, Amsterdam, 1993. Vol. 2A: Dfl. 430, ISBN 0-444-87348-1, 600 pp. Vol. 2B: Dfl. 470, ISBN 0-444-87349-X, 664 p

20

Dry coastal ecosystems. Ecosystems of the world, volumes 2A and 2B: E. van der Maarel (Editor). Elsevier, Amsterdam, 1993. Vol. 2A: Dfl. 430, ISBN 0-444-87348-1, 600 pp. Vol. 2B: Dfl. 470, ISBN 0-444-87349-X, 664 p

21

Dry coastal ecosystems. Ecosystems of the world, volumes 2A and 2B: E. van der Maarel (Editor). Elsevier, Amsterdam, 1993. Vol. 2A: Dfl. 430, ISBN 0-444-87348-1, 600 pp. Vol. 2B: Dfl. 470, ISBN 0-444-87349-X, 664 p

22

Dry coastal ecosystems. Ecosystems of the world, volumes 2A and 2B: E. van der Maarel (Editor). Elsevier, Amsterdam, 1993. Vol. 2A: Dfl. 430, ISBN 0-444-87348-1, 600 pp. Vol. 2B: Dfl. 470, ISBN 0-444-87349-X, 664 p

23

Dry coating of talc particles with fumed silica: Influence of the silica concentration on the wettability and dispersibility of the composite particles

24

Dry coating polymer powder particles with deagglomerated carbon nanotubes to improve their dispersion in nanocomposites

25

Dry coatings and ecodesign part. 1 — Environmental performances and chemical properties

26

Dry coatings and ecodesign: Part. 2 — Tribological performances

27

Dry cooling towers as condensers for geothermal power plants

28

Dry cooling with night cool storage to enhance solar power plants performance in extreme conditions areas

29

Dry cupping therapy and the wellness management of health travelers

30

Dry cutting performance of partially filtered arc deposited titanium aluminium nitride coatings with various metal nitride base coatings

31

Dry deep drawability of A5052 aluminum alloy sheet with DLC-coating

32

Dry degumming of vegetable oils by membrane filtration Original Research Article

33

Dry dense medium separation of iron ore using a gas–solid fluidized bed

34

Dry densification of carbon nanotube bundles Original Research Article

35

Dry deposition (downward, upward) concentration study of particulates and heavy metals during daytime, nighttime period at the traffic sampling site of Sha-Lu, Taiwan

36

Dry deposition and concentration of marine aerosols in a coastal area, SW Sweden

37

Dry deposition and foliar leaching of mercury and selected trace elements in deciduous forest throughfall

38

Dry deposition and interception of 4–22 μm diameter particles to a lettuce crop

39

Dry deposition and internal circulation of nitrogen, sulphur and base cations to a coniferous forest

40

Dry deposition and particle-size distribution of phosphorus in the marine atmosphere over the northeastern coast of Taiwan

41

Dry deposition and particle-size distributions of polycyclic aromatic hydrocarbons in the ambient air of a petrochemical plant

42

Dry deposition and resuspension of particle-associated metals near a freeway in Los Angeles

43

Dry deposition and soil–air gas exchange of polychlorinated biphenyls (PCBs) in an industrial area

44

Dry deposition calculations for the clean air status and trends network

45

Dry deposition effect of marine aerosol to the building stone of the medieval city of Rhodes, Greece

46

Dry deposition fluxes and atmospheric size distributions of mass, al, and mg measured in southern Lake Michigan during aeolos

47

Dry deposition fluxes and deposition velocities of PAHs at an urban site in Turkey

48

Dry deposition fluxes and velocities of polychlorinated biphenyls (PCBs) associated with particles

49

Dry deposition fluxes of ambient particulate heavy metals in a small city, Korea

50

Dry deposition measured with a water surface sampler: a comparison to modeled results

51

Dry deposition model for atmospheric particles

52

Dry deposition modelling of atmospheric aerosols from a lead smelting industry

53

Dry deposition of 214Pb to conifers

54

Dry deposition of acidic air pollutants to tree leaves, determined by a modified leaf-washing technique

55

Dry deposition of aerosol particles within model spruce canopies

56

Dry deposition of ammonia, nitric acid, ammonium, and nitrate to alpine tundra at Niwot Ridge, Colorado

57

Dry deposition of atmospheric polycyclic aromatic hydrocarbons (PAHs) in the southeast suburb of Beijing, China

58

Dry deposition of electrically charged aerosols

59

Dry deposition of gaseous elemental mercury to plants and soils using mercury stable isotopes in a controlled environment

60

Dry deposition of gaseous oxidized mercury in Western Maryland Original Research Article

61

Dry deposition of gaseous radioiodine and particulate radiocaesium onto leafy vegetables Original Research Article

62

Dry deposition of large, airborne particles onto a surrogate surface

63

Dry Deposition of Nonspherical Particles on Natural and Surrogate Surfaces

64

Dry deposition of ozone on building materials. Chamber measurements and modelling of the time-dependent deposition

65

Dry deposition of particles and canopy exchange: Comparison of wet, bulk and throughfall deposition at five forest sites in Italy

66

Dry deposition of particles in a coastal forest

67

Dry deposition of particles to building surfaces and soiling

68

Dry deposition of particles to wave surfaces: I. Mathematical modeling

69

Dry deposition of particles to wave surfaces: II. Wind tunnel experiments

70

Dry deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in ambient air

71

Dry deposition of polycyclic aromatic hydrocarbons in urban and rural sites of Western Greece

72

Dry deposition of reactive nitrogen to marine environments: recent advances and remaining uncertainties

73

Dry Deposition of SO2 Over Dry Dipterocarp Forest, Thailand

74

Dry deposition of sulfate-containing particulate at the highway intersection, coastal and suburban areas

75

Dry deposition of sulphate and nitrate to polypropylene surfaces in a semi-arid area of India

76

Dry deposition of sulphur dioxide and ammonia on wet surfaces and the surface oxidation kinetics of bisulphite

77

Dry deposition of sulphur over eastern South Africa

78

Dry deposition profile of small particles within a model spruce canopy

79

Dry deposition to forests—On the use of data from clearings

80

Dry deposition to pine of sulphur dioxide and ozone at low concentration

81

Dry deposition velocity of PM2.5 ammonium sulfate particles to a Norway spruce forest on the basis of S- and N-balance estimations

82

Dry deposition velocity of sulfur dioxide over rice paddy in the tropical region

83

Dry deposition washoff and dew on the surfaces of pine foliage on the urban- and mountain-facing sides of Mt. Gokurakuji, western Japan

84

Dry deposition, concentration and gas/particle partitioning of atmospheric carbazole

85

Dry deposition, ionic species measured and source interpretation during seasonal cycle at offshore areas near Taiwan Strait

86

Dry deposition, seasonal variation and source interpretation of ionic species at Abali, Firouzkouh and Varamin, Tehran Province, Iran

87

Dry dilute acid pretreatment by co-currently feeding of corn stover feedstock and dilute acid solution without impregnation

88

Dry dispersion of fine particles in gaseous phase

89

Dry dispersion of plant pulp in concrete and use thereof

90

Dry drainage: A sustainable solution to waterlogging and salinity problems in irrigation areas?

91

Dry elasto-plastic contact of nominally flat surfaces

92

Dry electrical discharge machining of cemented carbide

93

Dry etch characteristics of Al-Nd films for TFT-LCD

94

Dry etch chemistries for TiO2 thin films

95

Dry etching and implantation characteristics of III-N alloys

96

Dry etching and implantation characteristics of III-N alloys

97

Dry etching characteristics and surface reconstruction of Cl/Si(1 1 3)

98

Dry etching characteristics of (Ba0.6,Sr0.4)TiO3 thin films in high density CF4/Ar plasma

99

Dry etching characteristics of GaN for blue/green light-emitting diode fabrication

100

Dry etching characteristics of GaN using Cl2/BCl3 inductively coupled plasmas

101

Dry etching mechanism of copper and magnetic materials with UV illumination

102

Dry etching of AlTiC with CF/sub 4/ and H/sub 2/ for slider fabrication

103

Dry etching of bulk single-crystal ZnO in CH4/H2-based plasma chemistries

104

Dry etching of CuCrO2 thin films

105

Dry etching of ITO by magnetic pole enhanced inductively coupled plasma for display and biosensing devices

106

Dry etching of MgCaO gate dielectric and passivation layers on GaN

107

Dry etching of sapphire substrate for device separation in chlorine-based inductively coupled plasmas

108

Dry etching of surface textured zinc oxide using a remote argon–hydrogen plasma

109

Dry etching of zinc-oxide and indium-zinc-oxide in IBr and BI3 plasma chemistries

110

Dry excimer laser cleaning applied to nuclear decontamination

111

Dry Eye (Keratoconjunctiviti icca), Rheumatoid Arthriti, and jögren’ yndrome

112

Dry eye after laer in itu keratomileui

113

Dry eye after LAIK enhancement by flap lifting

114

Dry Eye after LASIK for Myopia

115

Dry eye disease and depression-anxiety-stress: A hospital-based case control study in Turkey

116

Dry eye disease: A review of diagnostic approaches and treatments

117

Dry eye in diabetic patient

118

Dry eye signs and symptoms in night-time workers

119

Dry Eye Syndrome

120

Dry Eye: an Inflammatory Ocular Disease

121

Dry fabrication process for heterojunction solar cells through in-situ plasma cleaning and passivation

122

Dry farming with soils under natural tephra cover in Lanzarote, Spain

123

Dry feed for Artemia: its effect on performance, physiology, immune responses and bacterial resistance

124

Dry fermented sausages enriched with lycopene from tomato peel

125

Dry fine comminution in a stirred media mill—MaxxMill

126

Dry formation of low-density Nomex™ rejects-based activated carbon fiber composites

127

Dry fractionation process as an important step in current and future lignocellulose biorefineries: A review

128

Dry friction and sliding wear of EPDM rubbers against steel as a function of carbon black content

129

Dry friction and wear characteristics of nickel/carbon nanotube electroless composite deposits

130

Dry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning

131

Dry friction of steel under high pressure in quasi-static conditions

132

Dry friction: modeling and energy flow

133

Dry galloping characteristics and its mechanism of inclined/yawed cables

134

Dry gas cleaning in coal gasification systems for fuel cells using composite sorbents

135

Dry gas cleaning of coexisting SOx and NOx by manganese ore

136

Dry gas cleaning process by adsorption of H2S into activated cokes in gasification of carbon resources

137

Dry gel conversion synthesis of SAPO-34 nanocrystals

138

Dry Granular Flow Modelling Including Erosion and Deposition

139

Dry grinding kinetics of binary mixtures of ceramic raw materials by Bond milling

140

Dry grinding kinetics of colemanite

141

Dry heat stress stability evaluation of casein peptide mixture

142

Dry Hot and Cool Tropical Climate Attenuation models at VHF

143

Dry ice – an eco-friendly alternative for ammonium reduction in leather manufacturing

144

Dry ice blasting as pretreatment of aluminum surfaces to improve the adhesive strength of aluminum bonding joints

145

Dry ice-originated supercritical and liquid carbon dioxide extraction of organic pollutants from environmental samples

146

Dry Joint Stone Masonry Walls Subjected to In-Plane Combined Loading

147

Dry Joint Stone Masonry Walls Subjected to In-Plane Combined Loading

148

Dry kiln scheduling in furniture production

149

Dry kiln scheduling in furniture production

150

Dry laser cleaning of mechanically thin films

151

Dry layer preparation and characterisation of polymer electrolyte fuel cell components

152

Dry Lips as a Possible New Clinical Sign in Diagnosis of Appendicitis in Adults: A Short Report

153

Dry lubricant for cold drawing low-carbon steel wire

154

Dry machining — commercial viability through filtered arc vapour deposited coatings

155

Dry Machining and Minimum Quantity Lubrication

156

Dry machining of aluminum–silicon alloy using polished CVD diamond-coated cutting tools inserts

157

Dry machining of Inconel 718, workpiece surface integrity

158

Dry machining: Machining of the future

159

Dry Magnus separation

160

Dry mass production and leaf area development of field-grown ornamental conifers: measurements and simulation

161

Dry mass production in seedlings of Norway spruce infected by the needle rust Chrysomyxa rhododendri

162

Dry Matter Accumulation and Associated Changes in Biochemical Parameters during Wheat Grain Development

163

Dry matter accumulation and forage quality characteristics of different soybean genotypes

164

Dry Matter Accumulation and Partitioning as Affected by Thinning in a Non-Prolific Maize Hybrid

165

Dry matter accumulation and partitioning in cotton (Gossypium hirsutum L.) as influenced by potassium fertilization

166

Dry Matter Accumulation in Linseed (Linum usitatissimum L.)

167

Dry matter amounts and increment in 21- to 91-year-old common alder and grey alder and some practical implications

168

Dry Matter and Crude Protein Degradability of Mopane Worm (Imbrasia belina) in Rumen of Steers

169

Dry Matter and Essential Oil Yield Changes of Lavandula officinalis under Cowmanure and Vermicompost Application

170

Dry Matter and Leaf Structure in Young Wheat Plants as Affected by Cadmium, Lead, and Nickel

171

Dry Matter and Nitrogen Remobilization of Two Wheat Genotypes under Post - anthesis Water Stress Conditions

172

Dry matter and root colonization of plants by indigenous arbuscular mycorrhizal fungi with physical fractions of dry olive mill residue inoculated with saprophytic fungi

173

Dry Matter Intake and Digestibility in Weast African Dwarf Goats Fed Raw or Processed

174

Dry matter intake and digestibility of temperate pastures supplemented with sorghum grain in wethers and heifers

175

Dry matter intake and eating rate of grass by dairy cows is restricted by internal, but not external water

176

Dry matter intake, in vivo nutrient digestibility and concentration of minerals in the blood and urine of steers fed rice straw treated with wood ash extract

177

Dry Matter Intake, Milk Yield and Milk Fatty Acid Composition of Dairy Cows Fed Raw or Microwave Irradiated Safflower Seed as a Substitution to Cottonseed

178

Dry matter losses in combination with gaseous emissions during the storage of forest residues

179

Dry matter partitioning and physiological responses of Coffea arabica varieties to soil moisture deficit stress at the seedling stage in Southwest Ethiopia

180

Dry matter partitioning and quality of Miscanthus, Panicum, and Saccharum genotypes in Arkansas, USA

181

Dry Matter Partitioning between Plant Organs in Wheat Cultivars Differing in Productivity and Drought Resistance

182

Dry Matter Partitioning in Linseed (Linum usitatissimum L.)

183

Dry Matter Partitioning to Stem at Full Maturity Affects Stem Desiccation and Combine Harvest Maturity in Soybeans

184

Dry Matter Partitioning, Growth Analysis and Water Use Efficiency Response of Oats (Avena sativa L.) to Excessive Nitrogen and Phosphorus Application

185

Dry matter remobilization and yield of durum wheat in Ardabil, Iran as affected by plant density and N fertilization level

186

Dry Matter Yield and Chemical Composition of Sorghum Cultivars with Varying Planting Density and Sowing Date

187

DRY MATTER YIELD AND FORAGE QUALITY OF OAT, BARLEY AND CANOLA MIXTURE

188

Dry matter yield and nutritive value of pea/wheat bi-crops differing in maturity at harvest, pea to wheat ratio and pea variety

189

Dry matter yield, feeding value, and antioxidant activity in Mediterranean chicory (Cichorium intybus L.) germplasm

190

Dry matter yield, forage quality and persistence of tall fescue (Festuca arundinacea) cultivars compared with perennial ryegrass (Lolium perenne) in a subtropical environment

191

Dry mechanochemical synthesis of hydroxyapatites from DCPD and CaO: influence of instrumental parameters on the reaction kinetics

192

DRY METHOD FOR PREPARATION OF INULIN BIOMASS AS A FEEDSTOCK FOR ETHANOL FERMENTATION

193

Dry micro-electro-discharge machining of carbon-nanotube forests using sulphur-hexafluoride Original Research Article

194

Dry milling characteristics of microwave dried maize grains (Zea mays L.) Original Research Article

195

Dry milling of field pea (Pisum sativum L.) groats prior to wet fractionation influences the starch yield and purity

196

Dry Mixing of Wheat Flours: Effect of Particle Properties and Blending Ratio

197

Dry mycelium of Penicillium chrysogenum induces expression of pathogenesis-related protein genes and resistance against wilt diseases in Bt transgenic cotton

198

Dry mycelium of Penicillium chrysogenum protects cotton plants against wilt diseases and increases yield under field conditions

199

Dry needling in patients with chronic heel pain due to plantar fasciitis: A single-blinded randomized clinical trial

200

Dry Needling of Tight Hamstrings in the Treatment of Chronic Low Back Pain

201

Dry Needling Plus Conventional Physiotherapy for Patients With Chronic Nonspecific Neck Pain: A Randomized Clinical Trial

202

Dry particle coating for improving the flowability of cohesive powders

203

Dry particle coating using magnetically assisted impaction coating: modification of surface properties and optimization of system and operating parameters

204

Dry particle high coating of biopowders: An energy approach

205

Dry patch interaction caused by lateral conduction in transition boiling

206

Dry periods on the NE Tibetan Plateau during the late Quaternary

207

Dry photochemical synthesis of hydrotalcite, γ-Al2O3 and TiO2 supported gold nanoparticle catalysts

208

Dry plasma synthesis of graphene oxide–Ag nanocomposites: A simple and green approach

209

Dry powder aerosol drug delivery—Opportunities for colloid and surface scientists

210

Dry powder formulation with α-glycosyltransferase-treated stevia for the effective absorption of hydrophobic bioactive compounds in crude drugs

211

Dry powder inhaler delivery of amorphous drug nanoparticles: Effects of the lactose carrier particle shape and size

212

Dry Powder Precursors of Cubic Liquid Crystalline Nanoparticles (cubosomes)

213

Dry powder preparation of inulin fructotransferase from Arthrobacter aurescens SK 8.001 fermented liquor

214

Dry powders for oral inhalation free of lactose carrier particles

215

Dry pressed ceramic tiles based on fly ash–clay body: Influence of fly ash granulometry and pentasodium triphosphate addition

216

Dry pretreatment of lignocellulose with extremely low steam and water usage for bioethanol production

217

Dry processing of borax by calcination as an alternative to wet methods

218

Dry processing of oats – Application of dry milling Original Research Article

219

Dry processing of silicon solar cells in a large area microwave plasma reactor

220

Dry reaction of indoles with carbonyl compounds on montmorillonite K10 clay: a mild, expedient synthesis of diindolylalkanes and vibrindole A

221

Dry reciprocating sliding wear behaviour of alumina–silicon carbide nanocomposite fabricated by ceramic injection molding

222

Dry reciprocating wear of Al–Si–SiCp composites: A statistical analysis

223

Dry reforming of CH4 over solid solutions of LaNi1−xCoxO3

224

Dry reforming of CH4 with Ni and Rh metal catalysts supported on SiO2 and La2O3 Original Research Article

225

Dry reforming of coke oven gases over activated carbon to produce syngas for methanol synthesis

226

Dry reforming of ethanol for hydrogen production: Thermodynamic investigation

227

Dry reforming of methane has no future for hydrogen production: Comparison with steam reforming at high pressure in standard and membrane reactors

228

Dry reforming of methane in a stagnation-flow reactor using Rh supported on strontium-substituted hexaaluminate Original Research Article

229

Dry reforming of methane in an atmospheric pressure plasma fluidized bed with Ni/γ-Al2O3 catalyst

230

Dry reforming of methane in membrane reactors using Pd and Pd–Ag composite membranes on a NaA zeolite modified porous stainless steel support

231

Dry reforming of methane on Ni–Mg–Al nano-spheroid oxide catalysts prepared by the sol–gel method from hydrotalcite-like precursors

232

Dry reforming of methane over catalysts derived from nickel-containing Mg–Al layered double hydroxides

233

Dry reforming of methane over LaNi1−yByO3±δ (B = Mg, Co) perovskites used as catalyst precursor Original Research Article

234

Dry reforming of methane over LnFe0.7Ni0.3O3−δ perovskites: Influence of Ln nature

235

Dry reforming of methane over Ni perovskite type oxides

236

Dry reforming of methane over nickel catalysts supported on magnesium aluminate spinels Original Research Article

237

Dry reforming of methane over nickel catalysts supported on the cuspidine-like phase Nd4Ga2O9

238

Dry reforming of methane over Pt/PrCeZrO catalyst: Kinetic and mechanistic features by transient studies and their modeling

239

Dry reforming of methane to syngas over La-promoted hydrotalcite clay-derived catalysts

240

Dry reforming of methane to synthesis gas on NiO–MgO nanocrystalline solid solution catalysts

241

Dry Reforming of Methane Using Cold Plasma; Kinetic Model Study

242

Dry reforming of methane using Ni–Ce catalysts supported on a modified mineral clay Original Research Article

243

Dry reforming of methane using Pd-based membrane reactors fabricated from different substrates

244

Dry reforming of methane with CO2 on an electron-activated iron catalytic bed

245

Dry reforming of propane over supported Re catalyst

246

Dry Regenerable Metal Oxide Sorbents for SO2 Removal from Flue Gases. 1. Development and Evaluation of Copper Oxide Sorbents

247

Dry rolling-sliding wear of austempered cast iron

248

Dry sausage fermented by Lactobacillus rhamnosus strains

249

Dry sausage ripening control integration of sensory-related properties

250

Dry season clouds and rainfall in northern Central America: Implications for the Mesoamerican Biological Corridor

251

Dry season herbivore densities around drinking troughs in the Kruger National Park

252

Dry season mapping of savanna forage quality, using the hyperspectral Carnegie Airborne Observatory sensor

253

Dry Season Prevalence of Bovine African Trypanosomosis in parts of Bokkos Local Government Area of Plateau State, Nigeria

254

DRY SEASON REFUGIA OF MALARIA-TRANSMITTING MOSQUITOES IN A DRY SAVANNAH ZONE OF EAST AFRICA

255

Dry season reproductive depression of Anopheles gambiae in the Sahel

256

Dry Season Salinity Changes in Arid Estuaries Fringed by Mangroves and Saltflats

257

Dry season supplementation of goats tethered on range supplemented with cowpea or groundnut residues with or without fresh leucaena leaves

258

Dry season water uptake by two dominant canopy tree species in a tropical seasonal rainforest of Xishuangbanna, SW China

259

Dry season water use patterns underGuiera senegalensisL. shrubs in a tropical savanna

260

Dry self-lubricating composites

261

Dry separation of particulate iron ore using density-segregation in a gas–solid fluidized bed

262

Dry separation of respirable lunar dust: Providing samples for the lunar airborne dust toxicity advisory group

263

Dry sex in Zimbabwe and implications for condom use

264

Dry skin and moisturizers

265

Dry sliding and boundary lubrication performance of a UHMWPE/CNTs nanocomposite coating on steel substrates at elevated temperatures

266

Dry sliding and tribocorrosion behaviour of hot pressed CoCrMo biomedical alloy as compared with the cast CoCrMo and Ti6Al4V alloys

267

Dry Sliding Behavior of Carbon-based Brake Pad Materials

268

Dry sliding behaviour of hydrogenated amorphous carbon (a-C:H) coatings on Ti-6Al-4V

269

Dry Sliding Behaviour Study of Novel Low-metallic Friction Materials by using DoE-Taguchi Method

270

Dry sliding friction and wear behavior of woodceramics/Al–Si composites

271

Dry sliding friction and wear behavior of woodceramics/Al–Si composites

272

Dry sliding friction and wear behavior of woodceramics/Al–Si composites

273

Dry sliding friction and wear behaviour of hardened AISI D2 tool steel with different hardness levels

274

Dry sliding friction and wear characteristics of Fe–C–Cu alloy containing molybdenum di sulphide

275

Dry sliding friction and wear properties of Al–25Zn–3Cu–3Si alloy

276

Dry sliding friction and wear properties of Al2O3 and carbon short fibres reinforced Al–12Si alloy hybrid composites

277

Dry sliding friction and wear properties of B4C particulate-reinforced Al-5083 matrix composites

278

Dry sliding friction and wear properties of metallic glass coating and martensite stainless coating

279

Dry sliding friction and wear properties of zinc-based alloys

280

Dry Sliding Friction and Wear Resistance of SnPb-Solder Affected Copper against Stainless Steel Counter Surface

281

Dry sliding of plasma-sintered iron—The influence of nitriding on wear resistance

282

Dry Sliding Oxidative Wear in Plain Carbon Dual Phase Steel Original Research Article

283

Dry sliding tribological behavior and mechanical properties of Al2024–5 wt.%B4C nanocomposite produced by mechanical milling and hot extrusion

284

Dry sliding tribological behavior of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam

285

Dry sliding tribological behaviors of nanocrystalline Cu–Zn surface layer after annealing in air

286

Dry sliding tribological properties and subsurface structure of nanostructured copper at liquid nitrogen temperature

287

Dry sliding tribological properties of nanostructured copper subjected to dynamic plastic deformation

288

Dry sliding up to 7.5 m/s and 800 °C of thermally sprayed coatings of the TiO2–Cr2O3 system and (Ti,Mo)(C,N)–Ni(Co)

289

Dry sliding wear behavior and corrosion resistance of NiCrBSi coating deposited by activated combustion-high velocity air fuel spray process

290

Dry sliding wear behavior of Al2O3 fiber reinforced aluminum composites

291

Dry sliding wear behavior of Al-based composites fabricated by exothermic dispersion reaction in an Al–ZrO2–C system

292

Dry sliding wear behavior of aluminum based hybrid composites with graphite nanofiber–alumina fiber

293

Dry sliding wear behavior of AM60B magnesium alloy

294

Dry sliding wear behavior of as-cast ZE41A magnesium alloy

295

Dry sliding wear behavior of cast SiC-reinforced Al MMCs

296

Dry sliding wear behavior of cast SiC-reinforced Al MMCs

297

Dry sliding wear behavior of cold sprayed aluminum amorphous/nanocrystalline alloy coatings

298

Dry Sliding Wear Behavior of Composite Materials Fabricated by Powder Metallurgy

299

Dry sliding wear behavior of Fe–28Al and Fe–28Al–10Ti alloys

300

Dry sliding wear behavior of Fe–28Al and Fe–28Al–10Ti alloys

301

Dry sliding wear behavior of Fe3Al alloys prepared by mechanical alloying and plasma activated sintering

302

Dry sliding wear behavior of hot deformed magnesium AZ61 alloy as influenced by the sliding conditions

303

Dry sliding wear behavior of hot extruded Al–Si–Pb alloys in the temperature range 25–200 °C

304

Dry sliding wear behavior of hot extruded ZE41A magnesium alloy

305

Dry sliding wear behavior of hot forged and annealed Cu–Cr–graphite in-situ composites

306

Dry sliding wear behavior of in situ Al–Al4C3 metal matrix composite produced by mechanical alloying technique

307

Dry sliding wear behavior of in situ Cu–TiB2 nanocomposites against medium carbon steel

308

Dry sliding wear behavior of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V substrate

309

Dry sliding wear behavior of low carbon dual phase powder metallurgy steels

310

Dry sliding wear behavior of magnesium alloys

311

Dry sliding wear behavior of Mg2Si/Al composites against automobile friction material

312

Dry sliding wear behavior of SiC/Al2O3 filled jute/epoxy composites

313

Dry sliding wear behavior of SiCP/QE22 magnesium alloy matrix composites

314

Dry sliding wear behavior of stir cast aluminium base short steel fiber reinforced composites

315

Dry sliding wear behavior of TIG welding clad WC composite coatings

316

Dry sliding wear behavior of TiNi alloy processed by equal channel angular extrusion

317

Dry sliding wear behaviors of Al–25Si–2.5Cu–1Mg alloys prepared by powder thixocasting

318

Dry sliding wear behaviors of Al–25Si–2.5Cu–1Mg alloys prepared by powder thixocasting

319

Dry sliding wear behaviors of La2O3–WSi2–MoSi2 composite against alloy steel

320

Dry sliding wear behaviour of a conventional and recycled high pressure die cast magnesium alloys

321

Dry sliding wear behaviour of AA 6351-ZrB2 in situ composite at room temperature

322

Dry sliding wear behaviour of Al(Mg)/Al2O3 interpenetrating composites produced by a pressureless infiltration technique

323

Dry sliding wear behaviour of Al–12Si and Al–12Si–3Cu cast alloys

324

Dry sliding wear behaviour of Al–12Si–4Mg alloy with cerium addition

325

Dry sliding wear behaviour of aluminum syntactic foam

326

Dry sliding wear behaviour of an aluminium alloy–granite particle composite

327

Dry sliding wear behaviour of cast high strength aluminium alloy (Al–Zn–Mg) and hard particle composites

328

Dry sliding wear behaviour of co-continuous ceramic foam/aluminium alloy interpenetrating composites produced by pressureless infiltration

329

Dry sliding wear behaviour of heat treated iron based powder metallurgy steels with 0.3% Graphite + 2% Ni additions

330

Dry sliding wear behaviour of hypereutectic Al–Si piston alloys containing iron-rich intermetallics

331

Dry sliding wear behaviour of in situ Al–TiB2 composites

332

Dry sliding wear behaviour of laser surface melting treated AM60B magnesium alloy

333

Dry sliding wear behaviour of magnesium alloy based hybrid composites in the longitudinal direction

334

Dry sliding wear behaviour of magnesium oxide and zirconium oxide plasma electrolytic oxidation coated magnesium alloy

335

Dry sliding wear behaviour of medium carbon steel against an alumina disk

336

Dry sliding wear behaviour of Mg–10Gd–3Y–0.4Zr alloy

337

Dry sliding wear behaviour of Mg–Si alloys

338

Dry sliding wear behaviour of nickel aluminides coatings produced by self-propagating high-temperature synthesis

339

Dry sliding wear behaviour of organo-modified montmorillonite filled epoxy nanocomposites using Taguchi’s techniques

340

Dry sliding wear behaviour of plasma electrolytic oxidation coated AZ91 cast magnesium alloy

341

Dry sliding wear behaviour of powder metallurgy Al–Mg–Si alloy-MoSi2 composites and the relationship with the microstructure

342

Dry sliding wear behaviour of some wrought, rapidly solidified powder metallurgy aluminium alloys

343

Dry Sliding Wear Behaviour of Talc-Reinforced UHMWPE Composite for Implant Application

344

Dry sliding wear behaviour of ZE41A magnesium alloy

345

Dry sliding wear characteristics of glass–epoxy composite filled with silicon carbide and graphite particles

346

Dry sliding wear characteristics of rheocast Mg–Sn based alloys

347

Dry sliding wear characteristics of some industrial polymers against steel counterface

348

Dry sliding wear in case-hardened niobium microalloyed steels

349

Dry sliding wear in high density Fe–2%Ni based P/M alloys

350

Dry sliding wear maps for AA7010 (Al–Zn–Mg–Cu) aluminium matrix composite

351

Dry sliding wear of Al alloy/SiCp functionally graded composites: Influence of processing conditions

352

Dry sliding wear of Al/Saffil/C hybrid metal matrix composites

353

Dry sliding wear of cryotreated multiple tempered D-3 tool steel

354

Dry sliding wear of Cu–15Ni–8Sn alloy

355

Dry sliding wear of Cu–Be alloys

356

Dry sliding wear of ferrous PM materials

357

Dry sliding wear of fly ash particle reinforced A356 Al composites

358

Dry sliding wear of garnet reinforced zinc/aluminium metal matrix composites

359

Dry sliding wear of gradient AlNi/SiC composites

360

Dry sliding wear of magnetron sputtered TiN/CrN superlattice coatings

361

Dry sliding wear of MAO-coated A356/20 vol.% SiCp composites in the temperature range 25–180 °C

362

Dry sliding wear of nanostructured Fe30Ni20Mn20Al30

363

Dry sliding wear of zirconia-toughened alumina with different metal oxide additives

364

Dry sliding wear properties of high volume fraction SiCp/Cu composites produced by pressureless infiltration

365

Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy

366

Dry sliding wear resistance of low temperature plasma carburised austenitic stainless steel

367

Dry sliding wear response of A413 alloy: Influence of intermetallics and test parameters

368

Dry sliding wear response of some industrial powder coatings

369

Dry Socket following Tooth Extraction in an Iranian Dental Center: Incidence and Risk Factors

370

Dry Socket following Tooth Extraction in an Iranian Dental Center: Incidence and Risk Factors

371

Dry spell analysis and maize yields for two semi-arid locations in east Africa

372

Dry spell characteristics over Canada in a changing climate as simulated by the Canadian RCM

373

Dry spinning yarns from vertically aligned carbon nanotube arrays produced by an improved floating catalyst chemical vapor deposition method Original Research Article

374

Dry stone walls take a dip

375

Dry storage effects on germinability of Scotch thistle (Onopordum acanthium) cypselas

376

Dry taps and what to do about them: A pictorial essay on failed arthrocentesis of the knee

377

Dry three-dimensional bubbles: growth-rate, scaling state and correlations

378

Dry turning of alumina/aluminum composites with CVD diamond coated Co-cemented tungsten carbide tools

379

Dry turning of sintered molybdenum

380

Dry turning of tempered martensitic stainless tool steel using coated cermet and coated carbide tools

381

Dry versus wet aging of beef: Retail cutting yields and consumer palatability evaluations of steaks from US Choice and US Select short loins

382

Dry versus wet aging of beef: Retail cutting yields and consumer sensory attribute evaluations of steaks from ribeyes, strip loins, and top sirloins from two quality grade groups

383

Dry vs soaked wood: Modulating the volatile extractible fraction of oak wood by heat treatments

384

Dry wall chamber issues for the SOMBRERO laser fusion power plant

385

Dry wear and friction behaviour of plasma nitrided Ti–6AL–4 V alloy after explosive shock treatment

386

Dry wear and friction properties of an A356/SiC foam interpenetrating phase composite

387

Dry wear and tribocorrosion mechanisms of pulsed plasma nitrided Ni–Cr alloy

388

Dry Wear Behavior of 42CrMo4 Steel/ZrO2 Composite Prepared by Pressure-Less Infiltration Method

389

Dry wear behaviour and its relation to microstructure of novel 6092 aluminium alloy–Ni3Al powder metallurgy composite

390

Dry wear of NiAl3-reinforced mechanically alloyed aluminium with different microstructure

391

Dry wear properties of A356-SiC particle reinforced MMCs produced by two melting routes

392

Dry weight loss of wood after the inoculation of Scots pine stumps with Phlebiopsis gigantea

393

Dry, high-temperature De-SO2 and De-H2S via treated calcium-based materials

394

Dry? Or not too dry? That is the question

395

Dry-Aging Effects on Palatability of Beef Longissimus Muscle

396

Dry-cast process for synthetic microporous membranes: Physico-chemical analyses through morphological studies

397

Dry-casting: Computer simulation, sensitivity analysis, experimental and phenomenological model studies

398

Dry-cleaning with high-pressure carbon dioxide—the influence of mechanical action on washing-results

399

Dry-cleaning with high-pressure carbon dioxide—the influence of process conditions and various co-solvents (alcohols) on cleaning-results

400

Dry-cured ham flavour: enzymatic generation and process influence

401

Dry-cured ham quality and acceptability as affected by the preservation system used for retail sale

402

Dry-cured ham restructured with fibrin

403

Dry-dispersal and rain-splash of brown (Puccinia recondita f.sp. tritici) and yellow (P. striiformis) rust spores from infected wheat leaves exposed to simulated raindrops

404

Dry-distillation of astatine-211 from irradiated bismuth targets: a time-saving procedure with high recovery yields

405

Dry-fermented chicken sausage produced with inulin and corn oil: Physicochemical, microbiological, and textural characteristics and acceptability during storage

406

Dry-Grind Process for Fuel Ethanol by Continuous Fermentation and Stripping

407

Drying and autogenous shrinkage of pastes and mortars with activated slag cement

408

Drying and Crystallization of Sucrose Solutions in Thin Films at Elevated Temperatures

409

Drying and dying of a subducted slab: Coupled Li and B isotope variations in Western Anatolia Cenozoic Volcanism

410

Drying and heat transfer behavior of banana undergoing combined low-pressure superheated steam and far-infrared radiation drying

411

Drying and Heating Modelling of Granular Flow: Application to the Mix-Asphalt Processes

412

Drying and pyrolysis of wood particles: experiments and simulation

413

Drying and re-cultivation of aerobic granules

414

Drying and rehydration characteristics of water chestnut (Trapa natans) as a function of drying air temperature Original Research Article

415

Drying and rewetting effects on C and N mineralization and microbial activity in surface and subsurface California grassland soils

416

Drying and rewetting effects on C and N mineralization and microbial activity in surface and subsurface California grassland soils

417

Drying and rewetting effects on soil microbial community composition and nutrient leaching

418

Drying and rewetting effects on soil microbial community composition and nutrient leaching

419

Drying and rewetting frequency influences cumulative respiration and its distribution over time in two soils with contrasting management

420

Drying and rewetting frequency influences cumulative respiration and its distribution over time in two soils with contrasting management

421

Drying and rewetting of a loamy sand soil did not increase the turnover of native organic matter, but retarded the decomposition of added 14C-labelled plant material

422

Drying and rewetting of a loamy sand soil did not increase the turnover of native organic matter, but retarded the decomposition of added 14C-labelled plant material

423

Drying and smoking of meat: heat and mass transfer modeling and experimental analysis Original Research Article

424

DRYING AND STERILIZATION OF HIGH MOISTURE ROUGH RICE USING CONDUCTION HEATING ROTARY DRYER

425

Drying and storage of prechilled Douglas fir, Pseudotsuga menziesii, seeds

426

Drying and Wetting Effects on Carbon Dioxide Release from Organic Horizons

427

Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes

428

Drying behavior of hydratable alumina-bonded refractory castables

429

Drying behavior of polymer solution containing two volatile solvents

430

Drying behavior of thin liquid films in a condenser dryer with a solvent-trapping screen

431

Drying behavior of uniform and binary mixture of solids in a batch fluidized bed dryer

432

Drying behaviour of calcium silicate

433

Drying behaviour of droplets of mixed powder suspensions

434

Drying behaviour of green beans Original Research Article

435

Drying behaviour of thick poly(octylthiophene) solutions

436

Drying by desorption: A tool to determine spray drying parameters Original Research Article

437

Drying chamber performance of V-groove forced convective solar dryer Original Research Article

438

Drying characteristics and drying quality of carrot using a two-stage microwave process Original Research Article

439

Drying characteristics and energy requirement for dehydration of chestnuts (Castanea sativa Mill.) Original Research Article

440

Drying characteristics and equilibrium moisture content of steam-treated Douglas fir (Pseudotsuga menziesii L.)

441

Drying characteristics and heat energy requirement of cornelian cherry fruits (Cornus mas L.)

442

Drying characteristics and kinetics of fluidized bed dried potato

443

Drying characteristics and kinetics of okra Original Research Article

444

Drying Characteristics and Physical and Nutritional Properties of Shrimp Meat as Affected by Different Traditional Drying Techniques

445

DRYING CHARACTERISTICS AND QUALITY CHANGES OF MORINGA LEAVES

446

Drying characteristics and quality of banana foam mat Original Research Article

447

DRYING CHARACTERISTICS AND SOME QUALITY ATTRIBUTES OF RASTRINEOBOLA ARGENTEA (OMENA) AND STOLEPHORUS DELICATULUS (KIMARAWALI)

448

Drying characteristics and sorption isotherm of tomato slices Original Research Article

449

DRYING CHARACTERISTICS INVESTIGATION OF BLACK MULBERRY DRIED VIA INFRARED METHOD

450

Drying characteristics of amaranth grain Original Research Article

451

Drying characteristics of banana: theoretical modelling and experimental validation Original Research Article

452

Drying Characteristics of Chili Using Continuous Fluidized-Bed Dryer

453

Drying Characteristics of Cotton Lint in a Recirculating Fixed-Bed Dryer with a Condenser

454

Drying characteristics of dill and parsley leaves Original Research Article

455

Drying characteristics of foamed alphonso mango pulp in a continuous type foam mat dryer Original Research Article

456

Drying Characteristics of Forest Biomass Particles of Pinus radiata

457

Drying characteristics of horse mackerel (Trachurus japonicus) dried in a heat pump dehumidifier Original Research Article

458

Drying characteristics of irradiated apple slices Original Research Article

459

Drying characteristics of kiwifruit during hot air drying Original Research Article

460

Drying characteristics of mango slices using the Refractance Window™ technique Original Research Article

461

Drying characteristics of peppercorns in a rectangular fluidized-bed with triangular wavy walls

462

Drying Characteristics of Powdered Wheat Straw and Its Mathematical Modeling

463

Drying characteristics of sardine fish dried with microwave heating

464

Drying Characteristics of the Solid By-product of Olive Oil Extraction

465

Drying characteristics of thorium fuel corrosion products

466

Drying characteristics of unshelled kernels of candle nuts Original Research Article

467

Drying Characteristics of Willow Chips and Stems

468

Drying characteristics of wood cylinders for conditions pertinent to fixed-bed countercurrent gasification

469

DRYING CONDITIONS for 11 POTENTIAL RAMIN SUBSTITUTES

470

Drying conditions influence on physical properties of recycled paper

471

Drying constant: literature data compilation for foodstuffs Original Research Article

472

Drying control system for spray booth with optimization of fuel consumption

473

Drying curve modelling of blanched carrot cubes under natural convection condition Original Research Article

474

Drying curves and apparent diffusivity of New Zealand chestnut variety ‘1015’ Original Research Article

475

Drying description of cylindrical pieces of bananas in different temperatures using diffusion models Original Research Article

476

Drying dissipative patterns of the colloidal crystals of silica spheres in an dc-electric field

477

Drying dissipative structures of lycopodium spore particles in aqueous dispersion

478

Drying effect of polymer-modified cement for patch-repaired mortar on constraint stress

479

Drying effect on cement paste porosity at early age observed by NMR methods

480

Drying effect on flavonoid composition and antioxidant activity of immature kumquat

481

Drying effects on the antioxidant properties of polysaccharides obtained from Agaricus blazei Murrill

482

Drying effects on the antioxidant properties of tomatoes and ginger

483

Drying Enhancement of Rough Rice by an Electric Field

484

Drying Food Waste Using a Conventional Tray Cabinet Dryer

485

DRYING GARCINIA ATROVIRIDIS USING WASTE HEAT FROM CONDENSER OF A SPLIT ROOM AIR CONDITIONER

486

Drying heat pumps – Part I: System integration

487

Drying heat pumps – Part II: Agro-food, biological and wood products

488

Drying induced stresses estimated on the base of elastic and viscoelastic models

489

DRYING KINETICS AND HEAT FLUX IN THIN-LAYER CONDUCTIVE DRYING

490

Drying Kinetics and Inversion Temperature in a Low-Pressure Superheated Steam-Drying System

491

Drying kinetics and product quality of dried Chempedak Original Research Article

492

Drying kinetics and quality attributes of low-fat banana slices dried at high temperature Original Research Article

493

Drying Kinetics and Quality Characteristics of Saffron Dried with a Heat Pump Assisted Hybrid Photovoltaic-thermal Solar Dryer

494

Drying Kinetics and Quality of Barberry in a Thin Layer Dryer

495

Drying Kinetics and Quality of Barberry in a Thin Layer Dryer

496

Drying kinetics and quality of beetroots dehydrated by combination of convective and vacuum-microwave methods Original Research Article

497

Drying kinetics and quality of coconut dried in a fluidized bed dryer Original Research Article

498

Drying kinetics and quality of Monukka seedless grapes dried in an air-impingement jet dryer

499

Drying kinetics and quality of potato chips undergoing different drying techniques Original Research Article

500

Drying kinetics and quality of vacuum-microwave dehydrated garlic cloves and slices Original Research Article

501

Drying Kinetics and Quality of Whole, Halved, and Pulverized Tiger Nut Tubers (Cyperus esculentus)

502

Drying kinetics and quality parameters of pumpkin slices dehydrated using different methods Original Research Article

503

Drying kinetics and rehydration characteristics of microwave-vacuum and convective hot-air dried mushrooms Original Research Article

504

Drying kinetics and segregation in a two-component anti-adherent coating studied by photoluminescence and Raman spectroscopies

505

Drying kinetics and survival studies of dairy fermentation bacteria in convective air drying environment using single droplet drying Original Research Article

506

Drying kinetics of apple cylinders under combined hot air–microwave dehydration Original Research Article

507

Drying kinetics of black grapes treated with different solutions Original Research Article

508

Drying Kinetics of Coconut Residue in Fluidized Bed

509

Drying kinetics of fresh and osmotically pre-treated papaya (Carica papaya L.) Original Research Article

510

Drying kinetics of grape seeds Original Research Article

511

Drying kinetics of high moisture paddy undergoing vibration-assisted infrared (IR) drying Original Research Article

512

Drying Kinetics of Hydrated and Gelatinized Corn Starches In the Presence of Sucrose and Sodium Chloride

513

Drying Kinetics of Mate Leaves in a Packed Bed Dryer

514

Drying Kinetics of Muscat Grapes in a Solar Drier with Evacuated Tube Collector

515

Drying kinetics of nickeliferous limonitic laterite ores

516

Drying kinetics of olive pomace in a fluidized bed dryer

517

Drying Kinetics of Oyster Mushroom (Pleurotus ostreatus) in a Convective Hot Air Dryer

518

Drying kinetics of plant products: Dependence on chemical composition Original Research Article

519

Drying kinetics of pomegranate arils

520

Drying kinetics of prickly pear fruit (Opuntia ficus indica) Original Research Article

521

Drying kinetics of RDX under atmospheric pressure and vacuum conditions

522

Drying Kinetics of Red Chillies in a Rotary Dryer

523

Drying Kinetics of Red Delicious Apple

524

Drying kinetics of rose hip fruits (Rosa eglanteria L.) Original Research Article

525

Drying kinetics of single porous particles in superheated steam under pressure

526

Drying kinetics of skim milk with 50 wt.% initial solids Original Research Article

527

Drying kinetics of some vegetables Original Research Article

528

Drying kinetics of the individual layer of cocoa beans during heat pump drying Original Research Article

529

Drying kinetics of Üryani plum in a convective hot-air dryer Original Research Article

530

Drying kinetics of white mulberry Original Research Article

531

Drying kinetics using superheated steam and quality attributes of dried pork slices for different thickness, seasoning and fibers distribution Original Research Article

532

Drying Kinetics, Rehydration Characteristics and Sensory Evaluation of Microwave Vacuum and Convective Hot Air Dehydrated Jackfruit Bulbs

533

Drying mechanisms and stress development in aqueous alumina tape casting

534

Drying medium level liquid waste concentrates

535

Drying methods for XPS analysis of PureVisionTM, Focus1 Night&DayTM and conventional hydrogel contact lenses

536

Drying model for cylindrical pasta shapes using desorption isotherms Original Research Article

537

Drying modeling and water diffusivity in beef meat Original Research Article

538

Drying modelling and experimentation of Assam black tea (Camellia sinensis) with producer gas as a fuel

539

Drying modelling of defrosted pork meat under forced convection conditions

540

Drying models for green peas

541

Drying morphologies and related wetting and impregnation behaviours of ‘sodium-alginate/urea’ inkjet printing thickeners

542

Drying of a plasmid containing formulation: chitosan as a protecting agent

543

Drying of a porous medium with multiple open sides using a pore-network model simulation

544

Drying of a porous spherical rock for compressed air energy storage

545

Drying of a white porous limestone monitored by NMR imaging

546

Drying of agar gels using supercritical carbon dioxide

547

Drying of agricultural crops by solar energy Original Research Article

548

Drying of apricots in a rotary column cylindrical dryer (RCCD) supported with solar energy

549

Drying of aqueous green tea extracts using a supercritical fluid spray process

550

Drying of bakerʹs yeast in batch fluidized bed

551

Drying of banana slices using combined low-pressure superheated steam and far-infrared radiation Original Research Article

552

Drying of beans in a pulsed fluid bed dryer: Drying kinetics, fluid-dynamic study and comparisons with conventional fluidization Original Research Article

553

Drying of biomass for second generation synfuel production

554

Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling

555

Drying of cherry tomato by a combination of different dehydration techniques. Comparison of kinetics and other related properties Original Research Article

556

Drying of clay slabs: Experimental determination and prediction by two-dimensional diffusion models

557

Drying of Conidia of Penicillium oxalicum, a Biological Control Agent against Fusarium Wilt of Tomato

558

Drying of copra in a forced convection solar drier

559

Drying of edamames by hot air and vacuum microwave combination Original Research Article

560

Drying of eggplant and selection of a suitable thin layer drying model Original Research Article

561

DRYING OF EGGPLANT SLICES USING MICROWAVE-OVEN

562

Drying of firewood – the effect of harvesting time, tree species and shelter of stacked wood

563

Drying of garlic (Allium sativum) cloves by microwave–hot air combination Original Research Article

564

Drying of garlic slices: Kinetics and nonlinearity measures for selecting the best equilibrium moisture content equation Original Research Article

565

Drying of gelcast ceramic parts via the liquid desiccant method

566

Drying of gelled sugar solutions—water diffusion behavior

567

Drying of granular materials in circulating fluidized beds

568

Drying of Hemp for Long Fibre Production

569

Drying of hot chilli using solar tunnel drier

570

Drying of Matricaria recutita Flowers in Vibrofluidized Bed Dryer: Optimization of Drying Conditions Using Response Surface Methodology

571

Drying of meso- and macroporous gels—Length change and drying dynamics

572

Drying of mint leaves in a solar dryer and under open sun: Modelling, performance analyses

573

Drying of Mint Leaves: Influence of the Process Temperature on Dehydration Parameters, Quality Attributes, and Energy Consumption

574

Drying of oil palm fronds using laboratory and commercial dryers

575

Drying of oil-in-water emulsions on hydrophobic and hydrophilic substrates

576

Drying of orange skin: drying kinetics modelling and functional properties Original Research Article

577

Drying of pear d’Anjou with and without osmotic dehydration Original Research Article

578

Drying of prickly pear cactus cladodes (Opuntia ficus indica) in a forced convection tunnel

579

Drying of red pepper in open sun and greenhouse conditions.: Mathematical modeling and experimental validation Original Research Article

580

Drying of rice crop – a newly progressing entity, its identification, pathogenicity, physiology and developing appropriate control measures

581

Drying of rice crop – a newly progressing entity, its identification, pathogenicity, physiology and developing appropriate control measures

582

Drying of seeds in a superheated steam vacuum fluidized bed Original Research Article

583

Drying of semicrystalline polymers: mathematical modeling and experimental characterization of poly(vinyl alcohol) films

584

Drying of sessile droplets of laponite-based aqueous nanofluids

585

Drying of silica sludge using microwave heating

586

Drying of some Philippine and Indonesian puddled rice soils following surface drainage:: Numerical analysis using a swelling soil flow model

587

Drying of Stevia leaves using laboratory and pilot scale dryers

588

Drying of thermally-weak organic powder in a centrifugal fluidized bed

589

Drying of Tomato in a Photovoltaic and Thermal Solar-Powered Continuous Dryer

590

Drying of Tunisian sardine (Sardinella aurita) experimental study and three-dimensional transfer modeling of drying kinetics Original Research Article

591

Drying of ultrasound pretreated apple and its selected physical properties Original Research Article

592

Drying of Urmia Lake: modeling of level fluctuations

593

Drying of vegetable starch solutions on inert particles: Quality and energy aspects Original Research Article

594

Drying of wet boric acid by microwave heating

595

Drying of yellow pea starch on inert carriers: Drying kinetics, moisture diffusivity, and product quality Original Research Article

596

Drying of yttria stabilized zirconia cast-tapes: Effect of aging time and surfactant addition on cracking behavior

597

Drying performance of a batch type vibration aided infrared dryer

598

Drying Performances and Milling Quality of Rice during Industrial Fluidized Bed Drying of Paddy in Malaysia

599

Drying procedures affect non-structural carbohydrates and other nutritive value attributes in forage samples

600

Drying process of microcrystalline cellulose studied by attenuated total reflection IR spectroscopy with two-dimensional correlation spectroscopy and principal component analysis

601

Drying process of pullulan edible films forming solutions studied by ATR-FTIR with two-dimensional correlation spectroscopy

602

Drying process of sodium alginate films studied by two-dimensional correlation ATR-FTIR spectroscopy

603

Drying process of tobacco leaves by using a fuzzy controller

604

Drying process optimisation in a mixed-flow batch grain dryer

605

Drying Properties and Quality Parameters of Dill Dried with Intermittent and Continuous Microwave-convective Air Treatments

606

Drying Rate and Product Quality Evaluation of Roselle (Hibiscus sabdariffa L.) Calyces Extract Dried with Foaming Agent under Different Temperatures

607

Drying rate control in the middle stage of microwave drying Original Research Article

608

DRYING RATE OF GRAIN MAIZE

609

Drying response and effective stress in a double porosity aggregated soil

610

Drying Rough Rice in a Fluidized Bed Dryer

611

Drying saturated zeolite pellets to assess fluidised bed performance

612

Drying shrinkage studies of wood sand concrete – Effect of different wood treatments

613

Drying stress of yttria-stabilized-zirconia slurry on a metal substrate

614

Drying technologies in food processing

615

Drying trials of thin stillage from the manufacture of rice spirit

616

Drying with superheated steam: maximum drying rate as a linear function of pressure

617

Drying, shrinkage and rehydration characteristics of kiwifruits during hot air and microwave drying Original Research Article

618

Drying, soil surface condition and interrill erosion on two Ontario soils

619

Drying/rewetting cycles mobilize old C from deep soils from a California annual grassland

620

Drying/rewetting cycles mobilize old C from deep soils from a California annual grassland

621

Drying/rewetting cycles of the soil under alternate partial root-zone drying irrigation reduce carbon and nitrogen retention in the soil–plant systems of potato

622

Drying-induced changes in phosphorus status of soils with contrasting soil organic matter contents – Implications for laboratory approaches

623

Drying-induced deformation behaviour of Shirahama sandstone in no loading regime

624

Drying-induced protein and microstructure damages of squid fillets affected moisture distribution and rehydration ability during rehydration Original Research Article

625

Drying-induced reduction in electrical resistivity of carbon black-polyamideimide nanocomposite films

626

Drying–rewetting cycles and γ-irradiation effects on enzyme activities of distinct layers from a Quercus ilex L. litter

627

Drying–rewetting cycles and γ-irradiation effects on enzyme activities of distinct layers from a Quercus ilex L. litter

628

Drying–rewetting events reduce C and N losses from a Norway spruce forest floor

629

Drying–rewetting events reduce C and N losses from a Norway spruce forest floor

630

Drying–wetting approach for 3D finite element sigma coordinate model for estuaries with large tidal flats

631

Dry-jet wet spinning of aromatic polyamic acid fiber using chemical imidization

632

Dryland Climatology, Sharon E. Nicholson. Cambridge University Press, New York (2011), ISBN: 978-0-521-51649-5

633

Dryland field performance of California and Arizona guayule genotypes in south Texas

634

Dryland forestry for sustainable development

635

Dryland forestry. Planning and management : P. F. Ffolliot, K. N. Brooks, H. M. Gregersen and A. L. Lundgren. John Wiley & Sons, New York, USA, 1995. 453 pp. Price: US$95 (hardback). ISBN 0 471 54800 6

636

Dryland geomorphology and interacting processes

637

638

Dryland observation at local and regional scale — Comparison of Landsat TM/ETM+ and NOAA AVHRR time series

639

Dryland plant biomass and soil carbon and nitrogen fractions on transient land as influenced by tillage and crop rotation

640

Dryland plant biomass and soil carbon and nitrogen fractions on transient land as influenced by tillage and crop rotation

641

Dryland salinity in the Upper Kent River catchment of Western Australia: farmer perceptions and practices

642

Dryland soil carbon dynamics under alfalfa and durum-forage cropping sequences

643

Dryland vegetation phenology across an elevation gradient in Arizona, USA, investigated with fused MODIS and Landsat data

644

Dryland winter wheat response to conservation tillage in a continuous cropping system in northwestern Iran

645

Dryland winter wheat response to conservation tillage in a continuous cropping system in northwestern Iran

646

Drylands — Linking landscape processes to sedimentary environments, London, UK. February 2005

647

Dryness of ephemeral lakes and consequences for dust activity: The case of the Hamoun drainage basin, southeastern Iran Original Research Article

648

Dry-off treatment of Assaf sheep: Efficacy as a management tool for improving milk quantity and quality

649

Dryopteris filix-mas (L.) Schott ethanolic leaf extract and fractions exhibited profound anti-inflammatory activity

650

Dry-or-buy decision support for dry kiln scheduling in furniture production

651

Dryout characteristics during flow boiling of R134a in vertical circular minichannels

652

Dry-out CHF correlation for R134a flow boiling in a horizontal helically-coiled tube

653

Dryout temperature–vapor pressure profile of polymeric fiber containing refractory castables

654

DryoutheatfluxexperimentswithdeepheterogeneousparticlebedOriginalResearchArticle

655

Dry-period irrigation and fertilizer application affect water use and yield of spring wheat in semi-arid regions

656

Dry-reagent nucleic acid biosensor based on blue dye doped latex beads and lateral flow strip

657

Dry-rewetting cycles regulate wheat carbon rhizodeposition, stabilization and nitrogen cycling

658

Dry-rewetting cycles regulate wheat carbon rhizodeposition, stabilization and nitrogen cycling

659

Dry-season outbreak of melioidosis in Western Australia

660

Dry-sliding self-lubricating ceramics: CuO doped 3Y-TZP

661

Dry-sliding tribological behavior of Fe–28Al–5Cr/TiC composites

662

Dry-sliding tribological behavior of Fe–Ni alloys

663

Dry-sliding tribological properties of a nano-eutectic Fe1.87C0.13 alloy

664

Dry-sliding tribological properties of ultrafine-grained Ti prepared by severe plastic deformation

665

Dry-sliding tribological properties of ultrafine-grained Ti prepared by severe plastic deformation Original Research Article

666

Dry-sliding wear studies of Fe3Al-ordered intermetallic alloy

667

Dry-sliding wear studies of Fe3Al-ordered intermetallic alloy

668

Dry-sliding wear studies of Fe3Al-ordered intermetallic alloy

669

Drystone retaining walls: Ductile engineering structures with tensile strength

670

Dry-thermophilic anaerobic digestion of organic fraction of the municipal solid waste: Focusing on the inoculum sources

671

Dry-thermophilic anaerobic digestion of simulated organic fraction of Municipal Solid Waste: Process modeling

672

DRY-TO-FLUID FRICTION "CONVERSION" IN SPHERICAL HINGES

673

DRY-TO-FLUID FRICTION "CONVERSION" IN SPHERICAL HINGES

674

Dry-Wall Survival Under IFE Conditions

675

Drywall Thermal Properties Exposed to High Temperatures and Fire Condition

676

Ds decays to η and η′ final states: a phenomenological analysis

677

DS RBAC – Dynamic Sessions in Role Based Access Control

678

DS/AHP method: A mathematical analysis, including an understanding of uncertainty

679

DS/CDMA Multiuser Detection with Evolutionary Algorithms

680

DS/CDMA signature sequences based on PR-QMF banks

681

dS/CFT correspondence in two dimensions

682

DS4NN: Direct training of deep spiking neural networks with single spike-based temporal coding

683

DSA affinity glycoproteome of human liver tissue

684

DSA lifetime measurements and structure of positive-parity bands of 120Xe

685

DSA Preparation of Pt NPs @MIL-53(Fe) and Its Catalytic Behaviors

686

DsbA and DsbC-catalyzed Oxidative Folding of Proteins with Complex Disulfide Bridge Patterns In Vitro and In Vivo

687

DsbL and DsbI Form a Specific Dithiol Oxidase System for Periplasmic Arylsulfate Sulfotransferase in Uropathogenic Escherichia coli

688

DSC “peak temperature” versus “maximum slope temperature” in determining TSSD temperature

689

DSC analysis and evaluation of forces released on deactivation of 0.40-mm (0.016 ) orthodontic thermo-activated NiTi wires: An in vitro study

690

DSC analysis of a simply supported anisotropic rectangular plate

691

DSC analysis of free-edged beams by an iteratively matched boundary method

692

DSC analysis of human plasma in breast cancer patients

693

DSC analysis of isothermal melt-crystallization, glass transition and melting behavior of poly(l-lactide) with different molecular weights

694

DSC ANALYSIS OF RECTANGULAR PLATES WITH NON-UNIFORM BOUNDARY CONDITIONS

695

DSC analysis of the abnormalities of human leg skeletal muscles: A preliminary study

696

DSC Analysis of Thermosetting Polyimides Based on Three Bismaleimide Resin Eutectic Mixtures

697

DSC and DEA studies of underfill curing kinetics

698

DSC and DMTA characterization of ternary blends

699

DSC and DMTA studies of a thermal interface material for packaging high speed microprocessors

700

DSC and DMTA study of annealed cold-drawn PET: a three phase model interpretation

701

DSC and FTIR studies on Gellan and Polyvinyl alcohol (PVA) blend films

702

DSC and NMR relaxation studies of starch–water interactions during gelatinization

703

DSC and Raman studies of the side chain length effect of ubiquinones on the thermotropic phase behavior of liposomes

704

DSC and Raman study on the interaction between polychlorinated biphenyls (PCB) and phospholipid liposomes

705

DSC and TEM analysis of lattice defects governing the mechanical properties of an ECAP-processed magnesium alloy

706

DSC and TGA Measurements of Room Temperature Ionic Liquids (RTILs) Containing Ammonium Alum or Aluminum Nitrate with Amide Compounds

707

DSC and TGA study of the transitions involved in the thermal treatment of binary mixtures of PE and EVA copolymer with a crosslinking agent

708

DSC and TMA studies on freezing and thawing gelation of galactomannan polysaccharide

709

DSC and TMDSC study of melting behaviour of poly(butylene succinate) and poly(ethylene succinate)

710

DSC and XRD studies on crystallization kinetics in AgI-rich glassy and glass-crystalline ionic conductors of the AgI–Ag2O–P2O5 system

711

DSC approach for the investigation of mobile water fractions in aqueous solutions of NaCl and Tris buffer

712

DSC as a tool to assess physiological evolution of apples preserved by edibles coatings

713

DSC Confirmation That Vitrification Is Not Necessary for Stabilization of the Restriction Enzyme EcoRI Dried with Saccharides

714

DSC Confirmation That Vitrification Is Not Necessary for Stabilization of the Restriction Enzyme EcoRI Dried with Saccharides

715

DSC determination of partial ternary phase diagrams of methanol/sodium chloride/water and propylene glycol/sodium chloride/water and their applications for synthesized diagrams

716

DSC evaluations of short-range-order kinetics in Cu–10at.% Al solid solutions as influenced by bound vacancies

717

DSC evaluations of short-range-order kinetics in Cu–10at.% Al solid solutions as influenced by bound vacancies

718

DSC evidence of the interaction and absorption of 3,4-Secoisopimar-4(18),7,15-trien-3-oic acid by biomembrane model

719

DSC examination of intestinal tissue following cold preservation

720

DSC examination of kidney tissue following warm ischemia and reperfusion injury

721

DSC examination of the rotator cuff muscles in rabbits

722

DSC investigation of connective tissues treated by IR-laser radiation

723

DSC investigation of exothermic reactions occurring at elevated temperatures in lithium-ion anodes containing PVDF-based binders

724

DSC investigation of the hindered effect on curing behavior for epoxy–phenol/MMT nanocomposites based on the acidic octadecylamine modifier

725

DSC investigation on WE43 and Elektron 21 Mg alloys

726

DSC kinetic study of the transitions involved in the thermal treatment of polymers. Methodological considerations

727

DSC measurement and prediction of phase diagrams for binary mixtures of energetic materials’ stabilizers

728

DSC measurements on sharks

729

DSC Model for Soil and Interface Including Liquefaction and Prediction of Centrifuge Test

730

DSC monitoring of the cure kinetics of a castor oil-based polyurethane

731

DSC of silver-added indium-tin-oxide (ITO) transparent conductive materials

732

DSC solution for flow in a staggered double lid driven cavity

733

DSC studies of Fusarium solani pisi cutinase: consequences for stability in the presence of surfactants Original Research Article

734

DSC studies on bound water in carboxymethylcellulose–polylysine complexes

735

DSC studies on crystallization mechanisms of tellurite glasses

736

DSC studies on organic melting point temperature standards

737

DSC studies on p-(n-alkyl)-p′-cyanobiphenyl (RCB’s) and p-(n-alkoxy)-p′-cyanobiphenyl (ROCB’s) liquid crystals

738

DSC studies on reactions of the elements with sulfur

739

DSC studies on synthesis of superabsorbent hydrogels

740

DSC studies on the melting crystallization of polyethylenes prepared from alkanes of varying molecular size

741

DSC studies on the transformation kinetics of two separated crystallization peaks of Si12.5Te87.5 chalcogenide glass: An application of the theoretical method developed and isoconversional method

742

DSC studies to evaluate the impact of bio-oil on cold flow properties and oxidation stability of bio-diesel

743

DSC study and computer modelling of the melting process in ice slurry

744

DSC study and phase diagrams calculation of binary systems of paracetamol

745

DSC study of alumina materials — applicability of transient DSC (Tr-DSC) to anodic alumina (AA) and thermoanalytical study of AA

746

DSC study of annealing and phase transformations of C60 and C70 polymerized under pressures in the range 9.5–13 GPa Original Research Article

747

DSC study of biodegradable poly(lactic acid) and poly(hydroxy ester ether) blends

748

DSC study of curing in smokeless briquetting

749

DSC study of mixtures of wheat flour and potato, sweet potato, cassava, and yam starches Original Research Article

750

DSC study of precipitation in an Al–Mg–Mn alloy microalloyed with Cu

751

DSC study of sucrose melting Original Research Article

752

DSC study of the effect of milling conditions on the hydrogen storage properties of boron

753

DSC study of the freezing and thawing behavior of pure water and binary H2O/HNO3 and H2O/HCl systems adsorbed by pyrogenic silica: implications for the atmosphere

754

DSC study of the reverse martensitic transformation behavior in a shape memory alloy pipe-joint

755

DSC study on combustion and pyrolysis behaviors of Turkish crude oils

756

DSC study on hyaluronan drying and hydration

757

DSC study on the effect of dimethysulfoxide (DMSO) and diethylsulfoxide (DESO) on phospholipid liposomes

758

DSC study on the motor protein myosin in fibre system

759

DSC study on the thermal properties of sunflower proteins according to their water content

760

DSC thermo-oxidative stability of red chili oleoresin microencapsulated in blended biopolymers matrices Original Research Article

761

DSC time-domain solution of Maxwell’s equations

762

DSC, as a new method to verify the exact warm and cold ischemic injury during small bowel surgery

763

DSC, dielectric and dynamic mechanical behavior of two- and three-component ordered polyurethanes

764

DSC, DTA and TG studies on structural phase transitions in Tl2ZnCl4

765

Dscam and Neuronal Uniqueness

766

DSCAM Is a Netrin Receptor that Collaborates with DCC in Mediating Turning Responses to Netrin-1

767

Dscam receptors from mollusca: Multiple isoforms are lacking

768

DSC-element method for free vibration analysis of rectangular Mindlin plates

769

DSC-element method for free vibration analysis of rectangular Mindlin plates

770

DSCOKRI: A library of computer programs for downscaling cokriging in support of remote sensing applications

771

DSC-Ritz element method for vibration analysis of rectangular Mindlin plates with mixed edge supports

772

DSC-Ritz method for high-mode frequency analysis of thick shallow shells

773

DSC-Ritz method for the free vibration analysis of Mindlin plates

774

DSD: a generic software package for model-based fault diagnosis in dynamic systems

775

DSD: a generic software package for model-based fault diagnosis in dynamic systems

776

777

DS-DPSO: A dual surrogate approach for intelligent watermarking of bi-tonal document image streams

778

dSED: a database tool for modeling sediment early diagenesis

779

D-serine added to antipsychotics for the treatment of schizophrenia

780

D-serine efficacy as add-on pharmacotherapy to risperidone and olanzapine for treatment-refractory schizophrenia

781

D-Shaped Left Ventricle, Anatomic, and Physiologic Implications

782

D-side: A facility and workforce planning group multi-criteria decision support system for Johnson Space Center

783

D-SIMPLE RINGS AND PRINCIPAL MAXIMAL IDEALS OF THE WEYL ALGEBRA

784

D-SIMS and ToF-SIMS quantitative depth profiles comparison on ultra thin oxynitrides

785

DSISoft—a MATLAB VSP data processing package,

786

DSM bereavement exclusion for major depression and objective cognitive impairment

787

DSM files for safe use of astaxanthin derivative in fish feed

788

DSM for general nonlinear equations

789

DSM Power Plant in India

790

DSM survey in India: Awareness, barriers and implementability

791

dsm.f90: A computer code for the solution of an inverse problem of ground water hydrology by the differential system method

792

DSM-5 mixed specifier for manic episodes: Evaluating the effect of depressive features on severity and treatment outcome using asenapine clinical trial data

793

DSM-5 proposed diagnostic criteria for sexual paraphilias: Tensions between diagnostic validity and forensic utility

794

DSMC modelling of vibrational and chemical kinetics for a reacting gas mixture

795

DSMC prediction of granular temperatures of clusters and dispersed particles in a riser

796

DSMC simulation of gas mixing in T-shape micromixer

797

DSMC simulation of subsonic flow through nanochannels and micro/nano backward-facing steps

798

DSMCast: a scalable approach for DiffServ multicasting

799

DSM-defined anxiety disorders symptoms in South African youths: Their assessment and relationship with perceived parental rearing behaviors

800

DSM-III-R and Eysenck personality measures among patients in a substance abuse programme

801

DSM-III-R and ICD-10 personality disorders and personality dimensions as assessed by the Dutch Short Form of the MMPI: Preliminary results

802

DSM-III-R and ICD-10 personality disorders and their relationship with the big five dimensions of personality

803

DSM-III-R tobacco dependence and quitting during late adolescence

804

DSM-IV 12-month and lifetime major depressive disorder and romantic relationships among African Americans

805

DSM-IV alcohol dependence and drinking in the U.S. population: A risk analysis

806

DSM-IV and dangerous and severe personality disorder—an essay

807

DSM-IV and the taxonomy of roles: How can the taxonomy of roles complement the DSM-IV to create a more holistic diagnostic tool?

808

DSM-IV diagnosis in depressed primary care patients with previous psychiatric ICD-10 bipolar disorder

809

DSM-IV Hypochondriasis in Primary Care

810

DSM-IV major depressive episode in the elderly: The relationship between the number and the type of depressive symptoms and impairment

811

DSM-IV mood-, anxiety- and alcohol use disorders and their comorbidity in the Finnish general population

812

Dsm-iv panic attacks and panic disorder in a community sample of adolescents and young adults: how specific are panic attacks?

813

DSM-IV Personality Disorders in the National Comorbidity Survey Replication

814

DSM-IV primary care version: An opportunity for general hospital and consultation-liaison psychiatrists?

815

DSM-IV psychiatric comorbidity according to symptoms of insomnia: a nationwide sample of Korean adults

816

DSMN: A New Approach for Link Prediction in Multilplex Networks

817

DSM-Oriented Scales and Statistically Based Syndromes for Ages 18 to 59: Linking Taxonomic Paradigms to Facilitate Multitaxonomic Approaches

818

DSM-PLW: Single-pass mining of path traversal patterns over streaming Web click-sequences

819

DSMʹs cautionary guideline to rule out malingering can protect the PTSD data base

820

DSMʹs sunscreens, with micronised TiO2, coenzyme Q-10 & vitamin E

821

DSNAODV: DETECTING SELFISH NODES BASED ON AD HOC ON-DEMAND DISTANCE VECTOR ROUTING PROTOCOL

822

DSNotify – A solution for event detection and link maintenance in dynamic datasets

823

Ds-optimal designs for Kozakʹs tree taper model

824

Ds-optimal experimental plans for robust parameter design

825

DSP- and GPS-based synchronized measurement system of harmonics in wide-area distribution system

826

DSP based inverter control for alternate energy systems

827

DSP for Practicing Engineers: A Case Study in Internet Course Delivery

828

DSP implementation of a PV system with GA-MLP-NN based MPPT controller supplying BLDC motor drive

829

DSP implementation of integrated store-and-forward APRS payload and OBDH subsystems for low-cost small satellite

830

DSP implementation of power measurements according to the IEEE trial-use standard 1459

831

DSP Implementation of the Multiple Reference Frames Theory for the Diagnosis of Stator Faults in a DTC Induction Motor Drive

832

DSP1, a Drosophila HMG protein, is involved in spatiotemporal expression of the homoeotic gene Sex combs reduced

833

DSP-128: Stream Cipher Based On Discrete Log Problem And Polynomial Arithmetic

834

dSPACE based adaptive neuro-fuzzy controller of grid interactive inverter

835

DSPACE Implementation of a Neural SVPWM Technique for a Two Level Voltage Source Inverter

836

837

D-spaces and covering properties

838

D-spaces and thick covers

839

D-spaces, aD-spaces and finite unions

840

DSP-based bottleneck bandwidth estimation

841

DSP-based hierarchical neural network modulation signal classification

842

DSP-based implementation of an ANSI S1.11 acoustic analyzer

843

DSP-based implementation of new random switching technique of inverter control for sensorless vector-controlled induction motor drives

844

DSP-based indirect-current-controlled STATCOM. I. Evaluation of current control techniques

845

DSP-based indirect-current-controlled STATCOM. II. Multifunctional capabilities

846

DSP-based minmax speed sensorless induction motor drive with sliding mode model-following speed controller

847

DSP-based PLL-controlled 50-100 kHz 20 kW high-frequency induction heating system for surface hardening and welding applications

848

DSP-Based Real-Time Implementation of a Hybrid H1 Adaptive Fuzzy Tracking Controller for Servo-Motor Drives

849

DSP-based sliding mode speed control of induction motor using neuro-genetic structure

850

DSP-based synchronous control of dual linear motors via Sugeno type fuzzy neural network compensator

851

DSP-based tension control and data acquisition for paper machine rewind roll drive

852

DSPC based polymeric micelles loaded with Amphotericin B: synthesis, characterization, and in vitro study

853

DSP-controlled, space-vector PWM, current source converter for STATCOM application

854

D-Spectrum and D-Energy of Complements of Iterated Line Graphs of Regular Graphs

855

DSPNexpress: a software package for the efficient solution of deterministic and stochastic Petri nets

856

DSPP effects on in vivo bone mineralization

857

DSPSO–TSA for economic dispatch problem with nonsmooth and noncontinuous cost functions

858

DSRank: A New Hyper-Linked Based Method to Rank Datasets in LOD Cloud

859

dsRNA Binding Properties of RDE-4 and TRBP Reflect Their Distinct Roles in RNAi

860

DSS application at a river basin scale, taking into account water resources exploitation risks and associated costs: The Algarve Region Original Research Article

861

DSS Application to the Development of Water Management Strategies in Ribeiras do Algarve River Basin

862

DSS for computer security incident response applying CBR and collaborative response

863

DSS implementation in the UK retail organisations: a GIS perspective

864

DSS implementation in the UK retail organisations: a GIS perspective

865

DSS tool for the implementation and operation of an umbilical system applying organic fertiliser

866

DSSDSS: a decision support system for dewatering systems selection

867

DSSIM-HR: A FORTRAN 90 program for direct sequential simulation with histogram reproduction

868

DSS-induced acute colitis in C57BL/6 mice is mitigated by sulforaphane pre-treatment

869

DSS-induced colitis increases visceral sensitivity to capsaicin: A new model for post-inflammatory visceral hyperalgesia

870

DSS-large rivers: developing a DSS under changing societal requirements

871

Dst of the Carrington storm of 1859 Original Research Article

872

D-stability analysis for discrete uncertain time-delay systems Original Research Article

873

D-stability and D-stabilization of linear discrete time-delay systems with polytopic uncertainties

874

DSTATCOM allocation in distribution networks considering reconfiguration using differential evolution algorithm

875

DSTATCOM BASED FIVE-LEVEL CASCADE H-BRIDGE MULTILEVEL INVERTER FOR POWER QUALITY IMPROVEMENT

876

D-state configurations in the electromagnetic form factors of the nucleon and the image resonance Original Research Article

877

D-STEM: a modified step method with desirability function concept

878

D-STEM: a modified step method with desirability function concept

879

DSTM: a framework to operationalise and refine a problem solving method modeled in terms of tasks and methods

880

D-string fluid in conifold, I: Topological gauge model Original Research Article

881

D-string fluid in conifold: II. Matrix model for D-droplets on imageand image Original Research Article

882

D-strings in unconventional type I vacuum configurations Original Research Article

883

D-strings on D-manifolds Original Research Article

884

d-Symmetric d-orthogonal polynomials of Brenke type

885

d-symmetry superconductivity due to valence bond correlations

886

DT fusion power production in ELM free H modes in JET

887

DT neutron irradiation experiment for evaluation of tritium recovery from WCCB blanket

888

D-T neutron streaming experiment simulating narrow gaps in ITER equatorial port

889

D-T operation on TFTR

890

DTA and IR absorption spectra of vanadium tellurite glasses

891

DTA and NQR studies of polymorphism in p-chlorofluorobenzene Original Research Article

892

DTA study of preheated kaolinite in the mullite formation region

893

DTA, FTIR and impedance spectroscopy studies on lithium–iron–phosphate glasses with olivine-like local structure

894

DTA, powder XRD and SEM study of manganese-containing borate glasses

895

DTA/TG, IR, EPR and XPS studies of some praseodymium(III) tungstates

896

d-Tagatose derivatives from d-fructose by a facile epimerisation procedure

897

D-tartaric acid: a novel catalyst for green and efficient synthesis of 3,4-dihydropyrimidin-2(1H)-ones by Biginelli reaction under solvent-free conditions

898

DTBB-Catalysed dilithiation of styrene and its methyl-derivatives: introduction of two electrophilic reagents

899

DTBB-catalysed lithiation of 1,2-bis(phenylsulfanyl)ethene: does 1-lithio-2-phenylsulfanylethene really exist?

900

DTBB-catalysed lithiation of 1,7-dihydrodibenzothiepin

901

DTBB-catalysed lithiation of 6-chloro-1-hexene and related systems: synthetically useful temperature-dependent behaviour

902

DT-bottlenecks in serial production lines: theory and application

903

DTC Hybrid Control by Different Methods of Observation with Artificial Intelligence for Induction Machine Drives

904

DTC Hybrid Control by Different methods of Observation with Artificial Intelligence for Induction Machine Drives

905

DTC-SVPWM of an energy storage flywheel associated with a wind turbine based on the DFIM

906

DT-Diaphorase Maintains the Reduced State of Ubiquinones in Lipid Vesicles thereby Promoting their Antioxidant Function

907

DT-diaphorase: a target for new anticancer drugs

908

DTEC-MAC: Diverse Traffic with Guarantee Energy Consumption for MAC in Wireless Body Area Networks

909

D-term challenges for supersymmetric gauged Abelian flavor symmetries

910

D-term inflation

911

D-term inflation at the TeV scale and large internal dimensions

912

D-term inflation in superstring theories Original Research Article

913

D-term inflation in type I string theory

914

D-terms and F-terms from D7-brane fluxes Original Research Article

915

D-terms and supersymmetry breaking from branes Original Research Article

916

DTFC-SVM Motion-Sensorless Control of a PM-Assisted Reluctance Synchronous Machine as Starter-Alternator for Hybrid Electric Vehicles

917

D-theory: field quantization by dimensional reduction of discrete variables Original Research Article

918

DTI at 7 and 3 T: systematic comparison of SNR and its influence on quantitative metrics

919

DTI of trabecular bone marrow

920

DTI Parameter Optimisation for Acquisition at 1.5T: SNR Analysis and Clinical Application

921

DTI views on the provision of encryption services on public networks

922

DTI-based segmentation and quantification of human brain lateral ventricular CSF volumetry and mean diffusivity: Validation, age, gender effects and biophysical implications

923

DTIS: Destination Traffic Based Input Selection Strategy Based on Traffic Pattern for Network-on-Chip Systems

924

DTM extraction of lidar returns via adaptive processing

925

DTM-based morphometry of the Palinuro seamount (Eastern Tyrrhenian Sea): Geomorphological and volcanological implications

926

DTM-BF METHOD FOR THE FLOW AND HEAT TRANSFER OVER A NONLINEARLY STRETCHING SHEET WITH NANOFLUIDS

927

DTMP: Energy Conception Reduction in Body Area Networks Using a Dynamic Traffic Management Protocol

928

DTM-Pade Approximants for MHD Flow with Suction/Blowing

929

DT-MRI denoising and neuronal fiber tracking

930

DTN Bundle Layer over TCP: Retransmission Algorithms in the Presence of Channel Disruptions

931

DTN routing in body sensor networks with dynamic postural partitioning

932

DTNNM: A windows program for strain analysis using the Delaunay triangulation nearest neighbour method

933

D-Topological duals of bicomplex BC-modules l- p-k (BC)

934

DT-optimum designs for model discrimination and parameter estimation

935

DTORH3 2.0: A new version of a computer program for the evaluation of toroidal harmonics Original Research Article

936

D-Tower, NOX, Doetinchem, the Netherlands, 1998-2004 and Son-O-House, Son en Breugel, NOX, the Netherlands, 2000-2004

937

DTP/SiO2:An Efficient And Reusable Heterogeneous Catalyst For synthesis of dihydropyrano[3,2-c]Chromene-3-Carbonitrile Derivatives

938

DTP2 control room operator and remote handing operation designer responsibilities and information available to them

939

D-tracer study of butadiene hydrogenation and tetrahydrothiophen hydrodesulphurisation catalysed by Co9S8

940

D-Transposition of the Great Arteries With an Aortopulmonary Window: A New Corrective Technique

941

D-Transposition of the Great Arteries: The Current Era of the Arterial Switch Operation

942

DTV (COFDM) SFN signal variation field tests in urban environments for portable outdoor reception

943

DTV repeater emission mask analysis

944

DTV standards and transition: A comparative policy analysis

945

DTV: Detection, Tracking and Validation Framework for Unique People Count

946

D-type anticipatory iterative learning control for a class of inhomogeneous heat equations

947

D-type fiber optic sensor used as a refractometer based on total-internal reflection heterodyne interferometry

948

Du bon usage de la honte: Serge Tisseron; éditions Ramsay, Paris 1998, 203 pages

949

Du comportement symbolique des derniers chasseurs Mechta-Afalou dʹAfrique du Nord

950

Du côté de La CharitéIn La Charité sur Loire

951

Du déni de grossesse au néonaticide : hypothèses diagnostiques autour d’un cas

952

Du Fort-Frankel Scheme for the Variable Order Time Fractional Diffusion Equation

953

Du laboratoire vers la clinique : expérience du glioblastome pour moduler la radiosensibilité tumorale

954

Du microcosme évolutif à la théorie générale : les escargots, Steve Gould et l’évolution

955

Du Pont announces new capacity, technology for Teflon

956

Du Pont announces new capacity, technology for Teflon

957

Du Pont’s early policy on the rotation of audit firms

958

Du processus décisionnel en psychiatrie clinique

959

Du quantitatif et du qualitatif dans lʹobservation en psychiatrie

960

Du rattachement des bouffées délirantes chez lʹadolescent aux troubles bipolaires dans leurs variantes psychopathiques

961

Du repérage des premières manifestations des troubles autistiques par les parents à la première prise en chargeFrom the first signs of autism to the initial acceptance of care.

962

Du rire aux larmes: Pathological laughing and crying in patients with traumatic brain injury and treatment with lamotrigine

963

Du rôle des techniques contemporaines sur lʹévolution de la psychiatrie

964

Du Roman-Histoire à l’Enquête Micro-Historique (Etude Sélective de l’œuvre de Patrick Modiano)

965

DU145 human prostate cancer cells express functional receptor activator of NFκB: New insights in the prostate cancer bone metastasis process

966

DUA TERAS, SATU DESTINASI: PELAN REFORMASI STRATEGIK PTV KE ARAH PEMBANGUNAN SEJAGAT

967

Duabanga-like leaves from the Middle Eocene Princeton chert and comparative leaf histology of Lythraceae sensu lato

968

Duadic group algebra codes

969

Duadic sequences of prime lengths Original Research Article

970

Duadic Z4-Codes

971

DUAL ‘REALITIES’ OF CONSERVATION BEHAVIOR: SELF-REPORTS VS OBSERVATIONS OF RE-USE AND RECYCLING BEHAVIOR

972

Dual 5-HT1A agonists and 5-HT re-uptake inhibitors by combination of indole-butyl-amine and chromenonyl-piperazine structural elements in a single molecular entity Original Research Article

973

Dual AC-drive system with a reduced switch count

974

Dual acting antioxidant A1 adenosine receptor agonists

975

Dual acting norepinephrine reuptake inhibitors and 5-HT2A receptor antagonists: Identification, synthesis and activity of novel 4-aminoethyl-3-(phenylsulfonyl)-1H-indoles Original Research Article

976

Dual action antibacterial TiO2 nanotubes incorporated with silver nanoparticles and coated with a quaternary ammonium salt (QAS)

977

Dual Action of ATP Hydrolysis Couples Lid Closure to Substrate Release into the Group II Chaperonin Chamber

978

Dual action of glatiramer acetate (Cop-1) in the treatment of CNS autoimmune and neurodegenerative disorders

979

Dual action of H2O2 on placental hCG secretion: Implications for oxidative stress in preeclampsia

980

Dual activation in a homolytic coupling reaction promoted by an enantioselective dinuclear vanadium(IV) catalyst

981

Dual activation in oxidative coupling of 2-naphthols catalyzed by chiral dinuclear vanadium complexes

982

Dual active material composite cathode structures for Li-ion batteries

983

Dual Active Site in the Endolytic Transglycosylase gp144 of Bacteriophage phiKZ

984

Dual activity of nitroxides as pro- and antioxidants: Catalysis of copper-mediated DNA breakage and H2O2 dismutation

985

Dual Adaptive Adjustment for Customized Garment Pattern

986

Dual adaptive control of chip refiner motor load

987

Dual adaptive control of nonlinear stochastic systems using neural networks

988

Dual adaptive cycles in implementing integrated coastal management

989

Dual addictions, parallel treatments: nicotine replacement therapy for patients receiving methadone treatment in the Islamic Republic of Iran

990

DUAL ADJUNCTIONS BETWEEN ALGEBRAS AND COALGEBRAS

991

Dual affinity method for plasmid DNA purification in aqueous two-phase systems

992

Dual Agency in Hospitals: What Strategies Do Managers and Physicians Apply to Reconcile Dilemmas Between Clinical and Economic Considerations?

993

Dual Agency: A Fresh Perspective to Identify Dilemma Mitigation Strategies – A Response to the Recent Commentaries

994

Dual Aharonov–Casher effect in singlet-exciton systems

995

Dual amperometric biosensor device for analysis of binary mixtures of phenols by multivariate calibration using partial least squares Original Research Article

996

Dual amperometric–potentiometric biosensor detection system for monitoring organophosphorus neurotoxins Original Research Article

997

Dual amplification strategy for the fabrication of highly sensitive amperometric immunosensor based on nanocomposite functionalized interface

998

Dual amplified, sensitive electrochemical detection of pathogenic sequences based on biobarcode labels and functional graphene modified electrode

999

Dual anaerobic co-digestion of sewage sludge and confectionery waste

1000

Dual analysis for path integrals and bounds for crack parameter

بازگشت