<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Experimental studies of solubility of elemental sulphur in supercritical carbon dioxide
2
Experimental studies of sound absorption by church pews
3
Experimental studies of space-charge waves and resistive-wall instability in space-charge-dominated electron beams
4
Experimental studies of spent fuel burn-up in WWR-SM reactor
5
Experimental studies of stress–diffusion coupling in semi-dilute polymer solutions. I. ‘Viscoelastic length’ and viscoelastic effects on early stage spinodal decomposition
6
Experimental studies of the aspiration efficiencies of blunt aerosol samplers at large angles to the wind
7
Experimental studies of the characteristics of dry band arcing on ADSS fiber optic cables
8
Experimental studies of the cratering process in porous ice targets Original Research Article
9
Experimental studies of the deuteron-induced activation cross-sections on natAg
10
Experimental studies of the dilepton emission from nucleon–nucleon interactions below pion production threshold Original Research Article
11
Experimental studies of the dilepton emission from nucleon–nucleon interactions below pion production threshold Original Research Article
12
Experimental studies of the effect of functional spacers to annular flow in subchannels of a BWR fuel element Original Research Article
13
Experimental studies of the effect of the ortho/para ratio on the neutronic performance of a liquid hydrogen moderator for a pulsed neutron source
14
Experimental studies of the effect of the ortho/para ratio on the neutronic performance of a liquid hydrogen moderator for a pulsed neutron source
15
Experimental studies of the effects of buffered particle dampers attached to a multi-degree-of-freedom system under dynamic loads
16
Experimental Studies of the Efficiency of the Collectors of Combined Solar-Fuel Convective Drying Plants
17
Experimental Studies of the Evaporation of Pure Liquid Droplets in a Single-Axis Non-Resonant Levitator
18
Experimental studies of the fibrous filters coupled with external electrical field
19
Experimental studies of the firefly chamber
20
Experimental studies of the firefly chamber
21
Experimental studies of the fluid dynamics in the separation zone in dissolved air flotation
22
Experimental studies of the higher Landau levels in the 2D electron system
23
Experimental studies of the interactions between anaerobically corroding iron and bentonite
24
Experimental studies of the JET NBI neutraliser plasma
25
Experimental studies of the microangioarchitecture of tumors using synchrotron radiation at SPring-8
26
Experimental studies of the microangioarchitecture of tumors using synchrotron radiation at SPring-8
27
Experimental studies of the noise properties of a deep submicron CMOS process
28
Experimental studies of the noise properties of a deep submicron CMOS process
29
Experimental studies of the P – T –H2O near-liquidus phase relations of basaltic andesite from North Sister Volcano, High Oregon Cascades: constraints on lower-crustal mineral assemblages
30
Experimental studies of the performance of adsorbed natural gas storage system during discharge
31
Experimental studies of the phase separation mechanism in Ti-15at%A1
32
Experimental studies of the phase separation mechanism in Ti-15at%A1
33
Experimental studies of the Pygmy Dipole Resonance
34
Experimental studies of the Pygmy Dipole Resonance
35
Experimental studies of the shear behavior and strength of LiteSteel beams with stiffened web openings
36
Experimental studies of the shear behaviour and strength of lipped channel beams with web openings
37
Experimental studies of the size effect affected microscale plastic deformation in micro upsetting process
38
Experimental Studies of the Stressed and Deformed State of Silicon Photoconverters
39
Experimental studies of the tooth wear resistance with different profiles in single screw compressor
40
Experimental Studies of Thermal Efficiency of a Solar Collector with an Aluminum Alloy Flat-Corrugated Beam-Absorbing Panel
41
Experimental Studies of Thermal Performance Enhancement of Flat Plate Collectors Using Nanofluids
42
Experimental studies of thermal resistance in a vapor chamber heat spreader
43
Experimental studies of thin-ply laminated composites
44
Experimental studies of three dimensional fuzzy logic power system stabilizer on damping of low-frequency global mode of oscillation
45
Experimental studies of traditions and underlying transmission processes in chimpanzees
46
Experimental studies of ultrafine particles in streets and the relationship to traffic
47
Experimental studies of uncertainties associated with chromatographic techniques
48
EXPERIMENTAL STUDIES OF UPCUTTING-SHEAR OPERATION
49
Experimental studies of using wireless energy transmission for powering embedded sensor nodes
50
Experimental studies of water crystallization in porous media
51
Experimental studies of water entrance in axisymmetric bodies with a negative pressure gradient
52
Experimental Studies of Wave Transmission through Single Perforated Sheets and Upright Perforated Wave Filters
53
Experimental studies of wave-particle interactions in space using particle correlators: Results and future developments Original Research Article
54
Experimental Studies of Wide Flange Beam to Square Concrete-Filled Tube Column Joints with Stiffening Plates Around the Column
55
Experimental studies of Zn and Pb induced high temperature corrosion of two commercial boiler steels
56
Experimental studies of η production at CELSIUS Original Research Article
57
Experimental studies of π+π− and K+K− production in two-photon collisions Original Research Article
58
Experimental studies on a DI diesel engine fueled with bioethanol-diesel emulsions
59
Experimental studies on a high performance compact loop heat pipe with a square flat evaporator
60
Experimental studies on a mixture of HFC-32/125/161 as an alternative refrigerant to HCFC-22 in the presence of polyol ester
61
Experimental studies on a new bioactive material: HAIonomer cements
62
Experimental studies on a novel roof pond configuration for the cooling of buildings
63
Experimental studies on a novel swirling fluidized-bed combustor using an annular spiral air distributor
64
Experimental studies on a solar still coupled with a flat-plate collector and a single basin still
65
Experimental studies on absorption heat transformer coupled distillation system
66
Experimental studies on air-assisted impinging jet atomization
67
Experimental studies on air-cooled NH3–H2O based modified gax absorption cooling system
68
Experimental studies on an ammonia ejector refrigeration system
69
Experimental studies on annoyance caused by noises from trams and buses
70
Experimental studies on biodegradable and swelling characteristics of natural fibers composites
71
Experimental studies on bursting pressure of thin-walled flow formed pressure vessels
72
Experimental studies on CHF characteristics of nano-fluids at pool boiling
73
Experimental studies on CO2 based single and two-phase natural circulation loops
74
Experimental studies on cofiring of coal and biomass blends in India
75
Experimental studies on comparison of microwave curing and thermal curing of epoxy resins used for alternative mould materials
76
Experimental studies on compressible leading-edge vortices
77
EXPERIMENTAL STUDIES ON CONGO RED ADSORPTION BY TEA WASTE IN THE PRESENCE OF SILICA AND Fe2O3 NANOPARTICLES
78
Experimental studies on cotton stalk combustion in a fluidized bed
79
Experimental studies on cracking processes and failure in marble under dynamic loading
80
Experimental studies on critical heat flux in vertical tight 37-rod bundles using freon-12
81
Experimental studies on desalination system for ocean thermal energy utilisation Original Research Article
82
Experimental studies on deuteron-induced activation reactions in IFMIF accelerator structural elements
83
Experimental studies on distributions of granule size, binder content and porosity in batch drum granulation: Inferences on process modelling requirements and process sensitivities
84
Experimental studies on drying of Zingiber officinale, Curcuma longa l. and Tinospora cordifolia in solar-biomass hybrid drier
85
Experimental studies on dynamic plastic buckling of circular cylindrical shells under axial impact
86
Experimental studies on dynamic process of energy recovery device for RO desalination plants Original Research Article
87
Experimental studies on dynamics of methane–air premixed flame in meso-scale diverging channels
88
Experimental studies on effect of guide vane shape on performance of impulse turbine for wave energy conversion
89
Experimental Studies on Ettringite-Induced Heaving in Soils
90
Experimental studies on excitation functions of the proton-induced activation reactions on silver
91
Experimental studies on excitation functions of the proton-induced activation reactions on yttrium
92
Experimental studies on fire-induced buoyant smoke temperature distribution along tunnel ceiling
93
Experimental studies on flame stabilization in a three step rearward facing configuration based micro channel combustor
94
Experimental studies on flow and pyrolysis of coal with solid heat carrier in a modified rotating cone reactor
95
Experimental studies on fracture characterisation and energy absorption of GFRP composite box structures
96
EXPERIMENTAL STUDIES ON GAS-PHASE NUCLEATION AND THE EFFECT OF SEED PARTICLES ON HOMOGENEOUS NUCLEATION SUPPRESSION
97
EXPERIMENTAL STUDIES ON GAS-PHASE NUCLEATION AND THE EFFECT OF SEED PARTICLES ON HOMOGENEOUS NUCLEATION SUPPRESSION
98
Experimental studies on grinding forces and force ratio of the unsteady-state grinding technique
99
Experimental studies on heat and mass transfer characteristics for R134a–DMF bubble absorber
100
Experimental studies on heat and mass transfer in a packed bed of burnt clay impregnated with CaCl2 liquid desiccant and exploring the use of gas side resistance model
101
Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid under turbulent flow with spiraled rod inserts
102
Experimental studies on heat transfer and friction factor characteristics of forced circulation solar water heater system fitted with helical twisted tapes
103
Experimental studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with helical screw-tape inserts
104
Experimental studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with regularly spaced helical screw-tape inserts
105
Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of twisted tapes
106
Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heating system fitted with regularly spaced twisted tape with rod and spacer
107
Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with helical screw-tape inserts
108
Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with regularly spaced helical screw-tape inserts
109
Experimental studies on heat transfer and thermal performance characteristics of thermosyphon solar water heating system with helical and Left–Right twisted tapes
110
Experimental studies on heat transfer in the flat-plate collector of a solar pump
111
EXPERIMENTAL STUDIES ON HEAT TRANSFER OF ALUMINA /WATER NANOFLUID IN A SHELL AND TUBE HEAT EXCHANGER WITH WIRE COIL INSERT
112
Experimental studies on hemi cylindrical walk-in type solar tunnel dryer for grape drying
113
Experimental studies on HFC based two-stage half effect vapour absorption cooling system
114
Experimental studies on homogeneous charge CI engine fueled with LPG using DEE as an ignition enhancer
115
Experimental studies on hydrogen generation by methane autothermal reforming over nickel-based catalyst
116
Experimental studies on hydrogenation of anthraquinone derivative in a microreactor
117
Experimental studies on hygroscopic CsOH and CsI and inert Ag aerosol behavior in LWR containment conditions
118
Experimental studies on ignimbrite and the effect of lichens and capillarity on the deterioration of Seljuk Gravestones
119
Experimental studies on indigenous hydrocarbon-degrading and hydrogen-producing bacteria in an oilfield for microbial restoration of natural gas deposits with CO2 sequestration
120
Experimental studies on interactions between a freely propagating flame and single obstacles in a rectangular confinement
121
Experimental studies on kaonic atoms at DAΦNE Original Research Article
122
Experimental studies on low-temperature pyrolysis of municipal household garbage—temperature influence on pyrolysis product distribution
123
Experimental studies on LWR containment aerosol behaviour at VICTORIA facility
124
Experimental studies on measurements of mass attenuation coefficients of boric acid at different concentration
125
Experimental studies on mechanical properties of cellular structures using Nomex® honeycomb cores
126
Experimental studies on molar distribution of CO/CO2 and CO/H2 along the length of downdraft wood gasifier
127
Experimental studies on multiple-model predictive control for automated regulation of hemodynamic variables
128
Experimental studies on municipal solid waste pyrolysis in a laboratory-scale rotary kiln
129
EXPERIMENTAL STUDIES ON MUSHROOM AND POLLEN DRYING
130
EXPERIMENTAL STUDIES ON MUSHROOM AND POLLEN DRYING
131
Experimental studies on myocardial protection with intermittent cross-clamp fibrillation: additive effect of the sodium-hydrogen exchanger inhibitor, cariporide
132
Experimental studies on Nafion® 112 single PEM-FCs exposed to freezing conditions
133
Experimental studies on natural smoke filling in atrium due to a shop fire
134
Experimental studies on neutronic performance of various cold-neutron moderators for the pulsed neutron sources
135
Experimental studies on neutronic performance of various cold-neutron moderators for the pulsed neutron sources
136
Experimental studies on NiSO4 by thermal analysis and calorimetry
137
Experimental studies on nonlinear seismic control of a steel–concrete hybrid structure using MR dampers
138
Experimental studies on optimal operating conditions for different flow field designs of PEM fuel cells
139
Experimental studies on orifice behavior and two-phase flow in flash chamber Original Research Article
140
Experimental studies on ozone and secondary aerosol formation in combustion
141
Experimental studies on particle impaction and bounce: effects of substrate design and material
142
Experimental studies on phase separation in critical microemulsion and micellar systems
143
Experimental studies on power system stability of a superconducting generator with high response excitation
144
Experimental studies on pressure drop characteristics of cryogenic cross-counter flow coiled finned tube heat exchangers Original Research Article
145
EXPERIMENTAL STUDIES ON PRESSURE drop CHARACTERIZATION OF CURVED TUBE SECTIONS IN LAMINAR FLOW REGIME
146
Experimental studies on producer gas generation from wood waste in a downdraft biomass gasifier
147
Experimental studies on pyrolysis of Datong coal with solid heat carrier in a fixed bed
148
Experimental studies on rewetting of hot vertical annular channel
149
Experimental studies on rewetting of hot vertical annular channel Original Research Article
150
Experimental studies on salt expansion for coarse grain soil under constant temperature
151
Experimental Studies on Savonius-type Vertical Axis Turbine for Low Marine Current Velocity
152
Experimental Studies on Seismic Behavior of Steel Pile-to-Pile-Cap Connections
153
Experimental studies on self-propagating combustion synthesis of niobium nitride
154
Experimental studies on shear failure of freeze-bonds in saline ice: Part I. Set-up, failure mode and freeze-bond strength
155
Experimental studies on shear failure of freeze-bonds in saline ice:: Part II: Ice–ice friction after failure and failure energy
156
Experimental studies on shear lag of box girders
157
Experimental studies on simultaneous removal of CO2 and SO2 in a polypropylene hollow fiber membrane contactor
158
Experimental studies on single-phase flow and heat transfer in a narrow rectangular channel
159
Experimental studies on sound and vibration of a two-tone Chinese Peace Bell
160
Experimental studies on stability and viscoplastic modeling of colloidal gas aphron (CGA) based drilling fluids
161
Experimental studies on stiffened plates under in-plane load and lateral pressure
162
Experimental studies on strength and ductility of CFRP jacketed reinforced concrete beam-column joints
163
Experimental Studies on Suppression of Combustion Instability with the Addition of Helium
164
Experimental studies on syngas catalytic combustion on Pt/Al2O3 in a microreactor
165
Experimental studies on temperature rise within a hydrogen cylinder during refueling
166
Experimental studies on the adhesion strength of a polymer-metal bond depending on the contact zone geometry
167
Experimental studies on the angular distribution of scintillation light from small BGO crystals
168
Experimental studies on the angular distribution of scintillation light from small BGO crystals
169
Experimental studies on the behavior of carbon-containing molecules in the boundary plasma
170
Experimental studies on the burning of coated and uncoated micro and nano-sized aluminium particles
171
Experimental studies on the characteristics of evaporative heat transfer and pressure drop of CO2/propane mixtures in horizontal and vertical smooth and micro-fin tubes
172
Experimental studies on the combustion characteristics and performance of a direct injection engine fueled with biodiesel/diesel blends
173
Experimental studies on the combustion characteristics of alternative jet fuels
174
Experimental Studies on the Conical Cap tray Performance
175
Experimental studies on the dehumidifier and regenerator of a liquid desiccant cooling system
176
Experimental studies on the deposition to crops of radioactive gases released from gas cooled reactors. Part 1. Carbonyl sulphide-35
177
Experimental studies on the deposition to crops of radioactive gases released from gas-cooled reactors — III. Carbon-14 dioxide
178
Experimental studies on the deposition to crops of radioactive gases released from gas-cooled reactors —II. Hydrogen sulphide-35
179
Experimental studies on the desorption of adsorbed proteins from liquid interfaces
180
Experimental studies on the desorption of adsorbed sodium poly(acrylic acid) from crude kaolin particles
181
Experimental Studies on the Drag Reduction and Lift Enhancement of a Delta Wing
182
Experimental studies on the dual continuous flow pattern in oil–water flows
183
Experimental studies on the dynamic tensile behavior of Ti–6Al–2Sn–2Zr–3Mo–1Cr–2Nb–Si alloy with Widmanstatten microstructure at elevated temperatures
184
Experimental studies on the effect of different metallic substrates on marine biofouling
185
Experimental studies on the effect of injection timing in a SI engine using dual injection of n-butanol and gasoline in the intake port
186
Experimental studies on the effect of osteotomy technique on the bone regeneration in distraction osteogenesis
187
Experimental studies on the effect of size and shape of holes on damage and microstructure of high hardness armour steel plates under ballistic impact
188
Experimental studies on the effect of water contaminants in convective boiling heat transfer
189
Experimental studies on the effects of fracture on the P and S wave velocity propagation in sedimentary rock (“Calcarenite del Salento”)
190
Experimental Studies on the Effects of Process Parameters on Granule Properties in a Conical High Shear Granulator
191
Experimental studies on the effects of reduction in gear tooth stiffness and lubricant film thickness in a spur geared system
192
Experimental studies on the effects of the “Conversion of Cropland to Grassland Program” on the water budget and evapotranspiration in a semi-arid steppe in Inner Mongolia, China
193
Experimental studies on the efficacy and side-effects of intraperitoneal vaccination of Atlantic salmon (Salmo salarL.) against furunculosis
194
Experimental studies on the evaporative heat transfer and pressure drop of CO2 and CO2/propane mixtures flowing upward in smooth and micro-fin tubes with outer diameter of 5 mm for an inclination angle of 45°
195
Experimental studies on the evaporative heat transfer and pressure drop of CO2 in smooth and micro-fin tubes of the diameters of 5 and 9.52 mm
196
Experimental studies on the evolution of antimony-resistant phenotype during the in vitro life cycle of Leishmania infantum: implications for the spread of chemoresistance in endemic areas
197
Experimental studies on the feeding and reproduction of Calanoides patagoniensis (Copepoda, Calanoid) in a southern upwelling ecosystem of the Humboldt Current
198
Experimental studies on the heating performance and emission characteristics of a W-shaped regenerative radiant tube burner
199
Experimental studies on the heterogeneous reaction of NO3 radicals with suspended carbaryl particles
200
Experimental studies on the hydrogen isotope recovery using low-pressure palladium membrane diffuser
201
Experimental studies on the indoor electrical floor heating system with carbon black mortar slabs
202
Experimental studies on the interaction among cracks, notches and interfaces of bonded polymers
203
Experimental studies on the interfacial shear-transfer mechanism in discontinuous glass-fibre composites
204
Experimental Studies on the Mechanical Behaviour of two Thermal Cracked Marbles
205
Experimental studies on the microstructure and hardness of laser-treated steel specimens
206
Experimental studies on the mobility of lanthanides accompanying alteration of andesite by acidic hot spring water
207
Experimental studies on the neutron emission spectrum and activation cross-section for 40 MeV deuterons in IFMIF accelerator structural elements
208
Experimental studies on the neutron emission spectrum and induced radioactivity of the 7Li(d,n) reaction in the 20–40 MeV region
209
Experimental studies on the non-linear oscillations of imperfect circular disks spinning near critical speed
210
Experimental studies on the plasma-chemical synthesis of a catalyst for natural gas reforming Original Research Article
211
Experimental studies on the possible influences of composition changes of pore water on the stability conditions of methane hydrate in marine sediments
212
Experimental studies on the pressure drop across the various components of a PHWR fuel channel
213
Experimental studies on the proton-induced activation reactions of molybdenum in the energy range 22–67 MeV
214
Experimental studies on the punch shear characterization of satin weave graphite/epoxy composites at room and elevated temperatures
215
Experimental studies on the punch shear characterization of satin weave graphite/epoxy composites at room and elevated temperatures
216
Experimental studies on the pyrolysis of humins from the acid-catalysed dehydration of C6-sugars
217
Experimental studies on the pyrolysis of humins from the acid-catalysed dehydration of C6-sugars
218
Experimental Studies on the Quasi-Static Axial Crushing Behavior of Foam-Filled Steel Extrusion Tubes
219
Experimental studies on the quasi-static axial crushing of steel columns filled with aluminium foam
220
Experimental Studies on the Rheological and Hydraulic Performance of Palm Based Hydraulic Fluid
221
Experimental studies on the ring opening polymerization of p-dioxanone using an Al(OiPr)3-monosaccharide initiator system
222
Experimental studies on the ripped-rock revetment embankment in permafrost regions of the Qinghai–Tibet railroad
223
Experimental studies on the shear behaviour and strength of LiteSteel beams
224
Experimental studies on the stable carbon isotope biogeochemistry of acetate in lake sediments
225
Experimental studies on the submicron particle impactor
226
Experimental studies on the temperature fluctuations in deformed thermoplastics with defects
227
Experimental studies on the three-dimensional effects of opposed-flow flame spread over thin solid materials
228
Experimental studies on the use of a phase change material for cooling mobile phones
229
Experimental studies on the use of mobile cylinders for measurement of flow through rectangular channels
230
Experimental studies on the use of MOV in transformer windings inner protection
231
Experimental Studies on the Use of Nanofluid and Glass Cover Cooling on the Performance of Hemispherical Solar Still: Energy and Exergy Approach
232
Experimental studies on the viscosity of TiO2 and Al2O3 nanoparticles suspended in a mixture of ethylene glycol and water for high temperature applications
233
Experimental studies on the yield behavior of ductile and brittle aluminum foams
234
Experimental studies on thermal conductivity of blends of ethylene glycol-water-based TiO2 nanofluids
235
Experimental studies on three potassium-rich ultramafic rocks from Damodar Valley, East India
236
Experimental studies on time-dependent size distributions of smoke particles of standard test fires
237
Experimental studies on transient features of natural convection in particles suspensions
238
Experimental studies on treatment of distillery effluent by liquid membrane extraction
239
Experimental studies on two-phase flow patterns aboard the Mir space station
240
Experimental studies on vacancy induced ferromagnetism in undoped TiO2
241
Experimental studies on wind influence on hydrogen release from low pressure pipelines
242
Experimental studies on yield behavior of steel under rapid heating
243
Experimental studies simulating potential phosphorus release from municipal sewage sludge deposits
244
Experimental studies the burning process of gelled unsymmetrical dimethylhydrazine droplets under oxidant convective conditions
245
Experimental studies using a low-energy RI beam separator at CNS Original Research Article
246
Experimental Studies With a Generalized Neuron-Based Power System Stabilizer
247
Experimental studies with power system stabilizers on a physical model of a multimachine power system
248
Experimental studies with simple neuro-controller based excitation controller
249
Experimental Studies, Response Surface Methodology and Molecular Modeling for Optimization and Mechanism Analysis of Methylene Blue Dye Removal by Different Clays
250
Experimental Study & Modeling of Surface Roughness in Turning of Hardened AISI 4340 Steel Using Coated Carbide Inserted
251
Experimental Study (FT IR and FT Raman), Computed Vibrational Frequency Analysis and Computed IR Intensity and Raman Activity Analysis on 2, 6-Lutidine: HF and DFT Calculations
252
Experimental Study 0f Drag Reduction Phenomena in the Horizontal Tube with Nano SiO2 by Neural Network - Genetic Algorithm
253
Experimental study about erosion in salt gradient solar pond
254
Experimental study about hydrogen isotopes storage on titanium bed
255
Experimental study about the agglomeration behavior in slurry prepared by adding excess polyelectrolyte dispersant
256
Experimental study about the effects of disc chipper settings on the distribution of wood chip size
257
Experimental study aiming to enhance the surface finish of fused deposition modeled parts
258
Experimental study and ab initio molecular orbital calculation on the photolysis of n-butyrophenone included within the alkali metal cation-exchanged ZSM-5 zeolite
259
Experimental Study and Adsorption Modeling of COD Reduction by Activated Carbon for Wastewater Treatment of Oil Refinery
260
Experimental study and analysis of breakdown characteristics of long air gaps with short tail lightning impulse
261
Experimental study and analysis of mechanical properties of frozen rabbit aorta by fracture mechanics approach
262
Experimental study and analysis of RC beams strengthened with CFRP laminates under sustaining load
263
Experimental study and analysis of the purge gas pressure drop across the pebble beds for the fusion HCPB blanket
264
Experimental study and analysis on driving wheels’ performance for planetary exploration rovers moving in deformable soil
265
Experimental study and analytical formulation of mechanical behavior of concrete
266
Experimental study and analytical model for pore structure of hydrated cement paste
267
Experimental study and analytical model of the cavitation ring region with small diameter ultrasonic horn
268
Experimental study and analytical model of the cavitation ring region with small diameter ultrasonic horn
269
Experimental study and analytical reconstruction of precessing vortex in a tangential swirler
270
Experimental study and application of mechanical properties for the interface between cobblestone aggregate and mortar in concrete
271
Experimental study and application of tannin foam for profile modification in cyclic steam stimulated well
272
Experimental study and application on profile control using high-temperature foam
273
Experimental study and asymptotic analysis of horizontally forced forward smoldering combustion
274
Experimental Study and CFD Modeling of the Ohmic Heating Process in a Static Two-Phase Biosolid – Liquid System
275
Experimental study and CFD simulation of wall effects on heat transfer of an extrudate multi-lobe particle
276
Experimental study and characterization of metal hydride containers
277
Experimental study and chemical analysis of n-heptane homogeneous charge compression ignition combustion with port injection of reaction inhibitors
278
Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile members
279
Experimental Study and Comparative Analysis of Transients of Induction Motor with Soft Starter Startup
280
Experimental Study and Comparison of a Few Lean (gasoline-natural gas) Dual Fuels Based on Safe Optimum Spark Advance
281
EXPERIMENTAL STUDY AND COMPUTATIONAL MODELLING OF GAS FIRED PULSE COMBUSTION
282
Experimental study and computer-aided prediction of percentage of water absorption of geopolymers produced by waste fly ash and rice husk bark ash
283
Experimental study and configurational-coordinate model for photo-induced effects in amorphous As2Se3 films
284
Experimental study and constitutive modelling of the passive mechanical properties of the ovine infrarenal vena cava tissue
285
Experimental study and constitutive modelling of the passive mechanical properties of the porcine carotid artery and its relation to histological analysis: Implications in animal cardiovascular device trials
286
Experimental Study and Correlation for Mass Transfer Coefficient in the Pilot Plant Multistage Column with the Presence of Molybdenum
287
Experimental study and detailed kinetic modeling of the effect of exhaust gas on fuel combustion: mutual sensitization of the oxidation of nitric oxide and methane over extended temperature and pressure ranges
288
Experimental Study and Economical Analysis of a Cascade Solar still Integrated with an Evacuated Tube and a Conventional Flat Plate Solar Collectors
289
Experimental study and evaluation of latent heat storage in phase change materials wallboards
290
Experimental study and exergetic analysis of a CPC-type solar water heater system using higher-temperature circulation in winter
291
Experimental study and FEM analysis of redundant strains in flow forming of tubes
292
Experimental study and finite element analysis of simple X- and T-branch tube hydroforming processes
293
Experimental study and finite element analysis of simple X- and T-branch tube hydroforming processes
294
Experimental study and finite element analysis of simple X- and T-branch tube hydroforming processes
295
Experimental study and finite element analysis of the elastic instability of composite lattice structures for aeronautic applications
296
Experimental study and finite element modelling of Japanese “Nuki” joints — Part one: Initial stress states subjected to different wedge configurations
297
Experimental study and finite element modelling of Japanese “Nuki” joints — Part one: Initial stress states subjected to different wedge configurations
298
Experimental study and finite element modelling of Japanese “Nuki” joints — Part two: Racking resistance subjected to different wedge configurations
299
Experimental study and finite element modelling of Japanese “Nuki” joints — Part two: Racking resistance subjected to different wedge configurations
300
Experimental Study and Finite Element Simulation of Residual Stress in Welded Sections of Steel P91 Pipes with Multi-pass Welding
301
Experimental study and FLUKA simulations of a prototype micromegas chamber in a mixed neutron and photon radiation field
302
Experimental study and FLUKA simulations of a prototype micromegas chamber in a mixed neutron and photon radiation field
303
Experimental Study and Identification of a Dynamic Deformation Model of Dry Clay at Strain Rates up to 2500 s^-1
304
Experimental Study and Kinetic Calculation on Migration of γ/α Interface Boundary During High Temperature Aging for 2205 Duplex Stainless Steel Original Research Article
305
Experimental study and kinetic modeling of kerosene thermal cracking
306
Experimental study and kinetic modeling of kerosene thermal cracking
307
Experimental study and large eddy simulation for the turbulent flow around four cylinders in an in-line square configuration
308
Experimental study and large eddy simulation of turbulent flow around tube bundles composed of wavy and circular cylinders
309
Experimental study and mathematical model for soya bean drying in thin layer
310
Experimental study and mathematical model of nanoparticle transport in porous media
311
Experimental Study and Mathematical Modeling of the Osmotic Drying Process
312
Experimental study and mathematical modeling of thin layer drying of rhubarb (Rheum ribes L.)
313
Experimental Study and Modeling by the Complete Factorial Plan of the Elimination of Textile Dye by Electrocoagulation Using Aluminum from Recycled Cans
314
Experimental study and modeling of a high-temperature solar chemical reactor for hydrogen production from methane cracking
315
Experimental study and modeling of an Organic Rankine Cycle using scroll expander
316
Experimental study and modeling of basic dye sorption by diatomaceous clay
317
Experimental study and modeling of cooling ceiling systems using steady-state analysis
318
Experimental study and modeling of dodecane ignition in a diesel engine
319
Experimental study and modeling of effective NaCl diffusion coefficients values during Emmental cheese brining Original Research Article
320
Experimental study and modeling of fluidized bed coating and agglomeration
321
Experimental Study and Modeling of Friction Stir Welding Process of Aluminum 1100 Alloys, using Artificial Neural Network with Taguchi Method
322
Experimental Study and Modeling of Gravity Drainage during WAG Process in Fractured Carbonate Rocks
323
Experimental study and modeling of impedance of the her on porous Ni electrodes
324
Experimental study and modeling of laser plasma ion implantation for WSex/57Fe interface modification
325
Experimental Study and Modeling of Mass Transfer Flux of CO2 Absorption with Amine Solution in Bubble Column
326
Experimental study and modeling of nisin diffusion in agarose gels Original Research Article
327
EXPERIMENTAL STUDY AND MODELING OF REINFORCED CONCRETE BEAMS STRENGTHENED BY POST-TENSIONED EXTERNAL REINFORCING BARS
328
Experimental study and modeling of residence time distribution in impinging stream reactor with GDB model
329
Experimental study and modeling of static electrification in power transformers
330
Experimental Study and Modeling of Supercritical Extraction of Nicotine from Tabacco Leaves
331
Experimental study and modeling of the effect of mixed size abrasive grits on surface topology and removal rate in wafer lapping
332
Experimental study and modeling of the influence of mixed electrolytes on adsorption of macromolecules on a hydrophobic resin
333
Experimental study and modeling of the salt effect on phase equilibria for binary hydroxylic liquid systems Original Research Article
334
Experimental study and modeling of the sorption of uranium(VI) onto olivine-rock
335
Experimental study and modeling of the transfer of zinc in a low reactive sand column in the presence of acetate
336
Experimental study and modeling on liquid dispersion in external-loop airlift slurry reactors
337
Experimental study and modelization of reverse osmosis with salt solutes in an unstirred batch cell
338
Experimental study and modelling of adsorption and desorption isotherms of prickly pear peel (Opuntia ficus indica) Original Research Article
339
Experimental study and modelling of Cr (VI) removal from wastewater using Lemna minor
340
Experimental study and modelling of gelatin production from bone powder: elaboration of an overall kinetic scheme for the acid process
341
Experimental study and modelling of granite-distilled water interactions at 180°C and 14 bars
342
Experimental study and modelling of heat transfer during condensation of pure fluid and binary mixture on a bundle of horizontal finned tubes
343
Experimental study and modelling of isotherms of sorption of humid natural phosphate
344
Experimental study and modelling of lead solubility as a function of pH in mixtures of ground waters and cement waters
345
Experimental study and modelling of mass transfer during simultaneous absorption of SO2 and NO2 with chemical reaction
346
Experimental study and modelling of methane adsorption and diffusion in shale
347
Experimental study and modelling of saturation molality of NaCl in quaternary aqueous electrolyte solutions at various temperatures Original Research Article
348
Experimental study and modelling of short fatigue crack growth in aluminium alloy Al7010-T7451 under random loading
349
Experimental study and modelling of the crystallization of a water droplet
350
Experimental study and modelling of the ice crystal morphology of model standard ice cream. Part I: Direct characterization method and experimental data Original Research Article
351
Experimental study and modelling of the ice crystal morphology of model standard ice cream. Part II: Heat transfer data and texture modelling Original Research Article
352
Experimental study and modelling of the residence time distribution in a scraped surface heat exchanger during sorbet freezing Original Research Article
353
Experimental study and modelling of thermal runaway: Application to dichromate catalysed hydrogen peroxide decomposition
354
Experimental study and modelling of volumetric properties, viscosities and refractive indices of binary liquid mixtures benzene + PEG 200/PEG 400 and toluene + PEG 200/PEG 400
355
Experimental study and modelling using the ERAS-Model of the excess molar volume of acetonitrile–alkanol mixtures at different temperatures and atmospheric pressure
356
Experimental study and Monte Carlo modeling of the Cherenkov effect
357
Experimental study and Monte Carlo modeling of the Cherenkov effect
358
Experimental study and neural network modeling of sugarcane bagasse pretreatment with H2SO4 and O3 for cellulosic material conversion to sugar
359
Experimental study and nuclear model calculations on the 192Os(p,n)192Ir reaction: Comparison of reactor and cyclotron production of the therapeutic radionuclide 192Ir
360
Experimental study and numerical analysis of a composite bridge structure
361
Experimental study and numerical analysis of thermocompressors with annular regenerators
362
Experimental study and numerical analysis on electromagnetic force of direct action solenoid valve Original Research Article
363
Experimental study and numerical investigation of particle penetration and deposition in 90° bent ventilation ducts
364
Experimental Study and Numerical Modeling of CO2 Bio-Fixation in a Continues Photobioreactor
365
Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack
366
Experimental study and numerical modelling of a dielectric barrier discharge in hybrid air–dielectric insulation
367
Experimental study and numerical modelling of the irradiation damage recovery in zirconium alloys
368
Experimental study and numerical modelling of the nickel oxide coating on the Ni(111) surface
369
Experimental study and numerical modelling of VHB 4910 polymer
370
Experimental study and numerical prediction of tensile strength properties and failure modes of hollow spheres filled syntactic foams
371
Experimental study and numerical simulation for a storehouse fire accident
372
Experimental study and numerical simulation of a solar still using an external condenser
373
Experimental study and numerical simulation of active vibration control of a highly flexible beam using piezoelectric intelligent material
374
Experimental Study and Numerical Simulation of Cutting and Tearing of Silicone Rubber using Extended Finite Element Method
375
Experimental study and numerical simulation of evacuation from a dormitory
376
Experimental study and numerical simulation of pipe-on-pipe impact
377
Experimental study and numerical simulation of preform or sheet exposed to infrared radiative heating
378
Experimental Study and Numerical Simulation of Sediment Transport in a Shallow Reservoir
379
Experimental Study and Numerical Simulation of Sediment Transport in a Shallow Reservoir
380
Experimental study and numerical simulation of the damage mode of a square reinforced concrete slab under close-in explosion
381
Experimental study and numerical simulation of the large-scale testing of polymeric composite journal bearings: Three-dimensional and dynamic modeling
382
Experimental study and numerical simulation of the pressure distribution on the die surface during upsetting
383
Experimental study and numerical simulation of three dimensional two-phase impinging jet flow using anisotropic turbulence model
384
Experimental study and numerical simulation on the formation of microstructure in cementitious materials at early age
385
Experimental study and optimization of the agglomeration of acerola powder in a conical fluid bed
386
Experimental study and particle population modeling of coating in a jet-fluidized bed
387
Experimental study and PC-SAFT simulations of sorption equilibria in polystyrene
388
Experimental study and performance analysis of a thermoelectric cooling and heating system driven by a photovoltaic/thermal system in summer and winter operation modes
389
Experimental study and phase equilibrium modeling of systems containing acid gas and glycol
390
Experimental study and predictions of an induced draft ceramic tile packing cooling tower
391
Experimental study and predictions of pressure losses of fluids modeled as Herschel–Bulkley in concentric and eccentric annuli in laminar, transitional and turbulent flows
392
Experimental study and process parameters analysis on the vacuum cooling of iceberg lettuce
393
Experimental study and process simulation of n-butyl acetate produced by transesterification in a catalytic distillation column
394
Experimental study and simulation of a hydraulic engine mount with fully coupled fluid–structure interaction finite element analysis model
395
Experimental study and simulation of a vertical section mullite-ternary eutectic (985 °C) in the SiO2–Al2O3–K2O system
396
Experimental Study and Simulation of Different EOR Techniques in a Non-Fractured Carbonate Core from an Iranian Offshore Oil Reservoir
397
Experimental study and simulation of plastic deformation of zirconia-based ceramics in a pulsed electric current apparatus Original Research Article
398
Experimental study and simulation of syngas generation from methane in the Pulsed Compression Reactor
399
Experimental study and simulation of vibrated fluidized bed drying
400
Experimental study and simulation on the formation of two-dimensional particle arrangements
401
Experimental study and simulations on two different avalanche modes in trench power MOSFETs
402
EXPERIMENTAL STUDY AND SPICE SIMULATION OF CMOS INVERTERS LATCH-UP EFFECTS DUE TO HIGH POWER MICROWAVE INTERFERENCE
403
Experimental Study and steady state stability analysis of CLL-T Series Parallel Resonant Converter with Fuzzy controller using State Space Analysis
404
Experimental study and steady-state simulation of biogeochemical processes in laboratory columns with aquifer material
405
Experimental study and strength formulation of soil-based controlled low-strength material containing stainless steel reducing slag
406
Experimental study and stress analysis of rock bolt anchorage performance
407
Experimental study and techno-economical evaluation of Khangiran sour natural gas condensate desulfurization process
408
Experimental study and theoretical analysis of local heat transfer distribution between smooth flat surface and impinging air jet from a circular straight pipe nozzle
409
Experimental study and theoretical analysis on die soldering in aluminum die casting
410
Experimental study and theoretical analysis on slender concrete-filled CFRP–PVC tubular columns
411
Experimental study and thermal analysis of a Gamma type Stirling engine for multi-objective optimization
412
Experimental study and thermodynamic assessment of ternary Mg–Zn–Ce phase relations focused on Mg-rich alloys
413
Experimental study and thermodynamic assessment of the Ag–Ti system
414
Experimental study and thermodynamic assessment of the Ag–Ti system
415
Experimental study and thermodynamic assessment of the Al–Fe rich side of the Al–Zn–Fe system at 300 and 550 ° C
416
Experimental study and thermodynamic assessment of the Cu–Fe–Ti system
417
Experimental study and thermodynamic assessment of the Cu–Ni–Ti system
418
Experimental study and thermodynamic assessment of the erbium–hydrogen binary system
419
Experimental study and thermodynamic assessment of the Zn-Fe-Ni system
420
Experimental study and thermodynamic assessment of the Zn-Fe-Ni system
421
Experimental study and thermodynamic calculation of Al–Mg–Sr phase equilibria
422
Experimental study and thermodynamic calculation of Au–Bi–Sb system phase equilibria Original Research Article
423
Experimental study and thermodynamic calculation of Bi–Cu–Sb system phase equilibria
424
Experimental study and thermodynamic calculations of phase relations in the Fe–C system at high pressure
425
Experimental study and thermodynamic modelling of the ternary Al–Ta–Ti system
426
Experimental study and thermodynamic modelling of the ZrO2–LaO1.5 system
427
Experimental study and thermodynamic modelling of the ZrO2–LaO1.5 system
428
Experimental study and thermodynamic optimization of the CaO–NiO, MgO–NiO and NiO–SiO2 systems
429
Experimental study and thermodynamic re-assessment of the binary Al–Ta system
430
Experimental study and thermodynamic re-assessment of the binary Fe–Ta system
431
Experimental study and thermodynamic re-assessment of the Ni–Zr system
432
Experimental study and thermodynamic re-assessment of the Ni–Zr system
433
Experimental study and thermodynamic remodeling of the Bi–Cu–Ni system
434
Experimental study and thermodynamical modelling of the solubilities of SO2, H2S and CO2 in N-dodecylimidazole and 1,1′-[oxybis(2,1-ethanediyloxy-2,1-ethanediyl)]bis(imidazole): An evaluation of their potential application in the separation of acidic gase
435
Experimental Study and Three-Dimensional Numerical Flow Simulation in a Centrifugal Pump when Handling Viscous Fluids
436
Experimental study and three-dimensional simulation of premixed hydrogen/air flame propagation in a closed duct
437
Experimental Study and wake Characteristics Comparison of a Car Model in Steady and Unsteady Flow
438
Experimental Study based Graphene Oxide Nanoplatelets Nanofluid Used in Domestic Application on the Performance of DASCs with Indirect Circulation Systems
439
Experimental study by pyrometry of Portevin–Le Châtelier plastic instabilities—Type A to type B transition
440
Experimental study conducted on a liquid-filled combined conical tank model
441
Experimental study for an intraoperative probe for 18F imaging with a silicon pixel detector
442
Experimental study for an intraoperative probe for 18F imaging with a silicon pixel detector
443
Experimental study for control of sound transmission through double glazed window using optimally tuned Helmholtz resonators
444
Experimental study for dimethyl ether production from biomass gasification and simulation on dimethyl ether production
445
Experimental study for growth potential of unicellular alga Chlorella pyrenoidosa on dairy waste water: An integrated approach for treatment and biofuel production
446
Experimental study for increasing productivity of Boletus edulis s.l. in Italy
447
Experimental Study for Investigating the Mechanism of Heat Transfer Near the Critical Heat Flux in Nucleate Pool Boiling
448
Experimental study for liquid phase selective hydrogenation of furfuryl alcohol to tetrahydrofurfuryl alcohol on supported Ni catalysts
449
Experimental study for measuring the decay branching ratio for nuclear excitation by electron transition in 189Os
450
Experimental study for noble gas release and exchange under high-speed frictional melting
451
Experimental Study for Protection of Piers Against Local Scour Using Slots
452
Experimental Study for Protection of Piers Against Local Scour Using Slots
453
Experimental study for sensorless broken bar detection in induction motors
454
Experimental Study for Strength Capacity of Cold-Formed Steel Joists Connections with Consideration of Various Bolts Arrangements
455
Experimental study for the comparison of classifier combination methods
456
Experimental study for the compressible behavior of warm and ice-rich frozen soil under the embankment of Qinghai–Tibet Railroad
457
Experimental study for the evaluation of creep in concrete through thermal measurements
458
Experimental study for the improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure
459
Experimental study for the improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure
460
Experimental study for thermal conductivity structure of lunar surface regolith: Effect of compressional stress
461
Experimental study of 2,4,6-Trichlorophenol and pentachlorophenol solubilities in aqueous solutions: derivation of a speciation-based Chlorophenol solubility model
462
Experimental study of 210Po release from 17Li83Pb eutectic
463
Experimental Study of 3D Pump-Intake Flows with and without Cross Flow
464
Experimental Study of 3D Pump-Intake Flows with and without Cross Flow
465
Experimental study of a 3D dry granular medium submitted to horizontal shaking
466
Experimental study of a basin type solar still with internal and external reflectors in winter Original Research Article
467
Experimental study of a burner with high temperature heat recovery system for TPV applications
468
Experimental study of a circular concrete column reinforced with a composite tube
469
Experimental study of a closed loop vertical ground source heat pump system
470
Experimental study of a cocurrent upfiow packed bed bubble column reactor: pressure drop, holdup and interfacial area
471
Experimental study of a commercial circulated fluidized bed coal gasifier
472
Experimental study of a compact PCM solar collector
473
Experimental study of a composite wood–concrete beam with the INSA–Hilti new flexible shear connector
474
Experimental study of a counter flow regenerative evaporative cooler with finned channels
475
Experimental study of a crystal positron source
476
Experimental study of a domestic thermoelectric cogeneration system
477
Experimental study of a double exposure solar cooker with finned cooking vessel
478
Experimental Study of a Double Glazed Solar Air Collector
479
Experimental study of a dynamic filtration system with overlapping ceramic membranes and non-permeating disks rotating at independent speeds
480
Experimental study of a finned tubes impact gas-solid separator for CFB boilers
481
Experimental Study of a Flash-lamp Pumped Passively Q-Switched Nd:YAG Laser Using Cr^4+:YAG Saturable Absorber
482
Experimental study of a fuel cell power train for road transport application
483
Experimental Study of a Gas Engine-driven Heat Pump System for Space Heating and Cooling
484
Experimental study of a ground-coupled heat pump combined with thermal solar collectors
485
Experimental study of a hand-drawn cart for measuring the bridge frequencies
486
Experimental study of a heat pump system with flash-tank coupled with scroll compressor
487
Experimental study of a high power and high efficiency CW diode-side-pumped Nd:YAG laser
488
Experimental Study of a High Speed Micro Waterwheel
489
Experimental study of a high-current FEM with a broadband microwave system
490
Experimental study of a high-current FEM with a broadband microwave system
491
Experimental study of a high-power CW side-pumped Nd:YAG laser
492
Experimental Study of a Horizontal Jet in a Wavy Environment
493
Experimental study of a hybrid photocatalytic hydrogen production reactor for Cu–Cl cycle
494
Experimental study of a Kiglapait marginal rock and implications for trace element partitioning in layered intrusions
495
Experimental study of a liquid Xenon PET prototype module
496
Experimental study of a liquid Xenon PET prototype module
497
Experimental study of a low pressure stoichiometric premixed methane, methane/ethane, methane/ethane/propane and synthetic natural gas flames
498
Experimental study of a low temperature heat driven re-heat two-stage adsorption chiller
499
Experimental study of a low-alkali tholeiite at 1–5 kbar: optimal condition for the crystallization of high-An plagioclase in hydrous arc tholeiite
500
Experimental study of a mechanically ventilated double-skin façade with venetian sun-shading device: A full-scale investigation in controlled environment
501
Experimental study of a metal hydride vessel based on a finned spiral heat exchanger
502
Experimental study of a multiple-effect humidification solar desalination technique Original Research Article
503
Experimental Study of a Nanoparticle Virtual Impactor
504
Experimental study of a new corona-based unipolar aerosol charger
505
Experimental study of a new furan-2-ylmethylene-hydrazide as a corrosion inhibitor in acidic media
506
Experimental study of a new kind of superconducting inductor
507
Experimental study of a non-isothermal wall jet issued by a displacement ventilation system
508
Experimental study of a novel CaCl2/expanded graphite-NH3 adsorption refrigerator
509
Experimental study of a novel capacity control algorithm for a multi-evaporator air conditioning system
510
Experimental study of a novel neuro-fuzzy system for on-line handwritten UNIPEN digit recognition
511
Experimental study of a novel portable solar still by utilizing the heatpipe and thermoelectric module Original Research Article
512
Experimental Study of a Pack of Supercapacitors Used in Electric Vehicles
513
Experimental study of a photovoltaic solar-assisted heat-pump/heat-pipe system
514
Experimental study of a pickup truck near wake
515
Experimental study of a plat-flame micro combustor burning DME for thermoelectric power generation
516
Experimental study of a potential weakening effect in spheres with thin hard coatings
517
Experimental study of a proximity focusing Cherenkov counter prototype for the AMS experiment
518
Experimental study of a proximity focusing Cherenkov counter prototype for the AMS experiment
519
Experimental study of a pseudo-preconsolidation pressure in frozen soils
520
Experimental study of a roof solar collector towards the natural ventilation of new houses
521
Experimental study of a semiconductor laser diode having a Mach–Zehnder interferometer in the cavity
522
Experimental study of a series-connected two-evaporator refrigerating system with propane (R-290) as the refrigerant
523
Experimental study of a simple reinforced concrete beam temporarily strengthened by SMA wires followed by permanent strengthening with CFRP plates
524
Experimental study of a simple reinforced concrete beam temporarily strengthened by SMA wires followed by permanent strengthening with CFRP plates
525
Experimental study of a single tube high RF power amplifier for ICRF heating system
526
Experimental study of a single-cylinder engine fueled with natural gas–hydrogen mixtures
527
Experimental Study of a Soft-Switched Isolated Bidirectional AC–DC Converter Without Auxiliary Circuit
528
Experimental study of a solar desalination system based on humidification–dehumidification process Original Research Article
529
Experimental study of a solar still with sponge cubes in basin
530
Experimental study of a solid adsorption cooling system using flat-tube heat exchangers as adsorption bed
531
Experimental study of a solidified activated carbon-methanol adsorption ice maker
532
Experimental Study of a Square Foundation with Connected and NonConnected Piled Raft Foundation Under Eccentrically Loaded
533
Experimental study of a static system based on a magneto-thermal coupling in ferrofluids
534
Experimental Study of a Tanker Ship Squat in Shallow Water
535
Experimental Study of a Thermal Plume Evolving in a Confined Environment: Application to Fires Problems
536
Experimental Study of a Thermal Plume Evolving in a Confined Environment: Application to Fires Problems
537
Experimental study of a thermochemical compressor for an absorption/compression hybrid cycle
538
Experimental study of a thermo-chemical refrigerator using the barium chloride–ammonia reaction
539
Experimental study of a thermochromic material based optical fiber sensor for monitoring the temperature of the water in several applications
540
Experimental study of a thermoelectrically-driven liquid chiller in terms of COP and cooling down period
541
Experimental study of a three-effect plate evaporator: seawater tests in La Spezia Original Research Article
542
Experimental study of a transformer with superconducting elements for fault current limitation and energy redistribution Original Research Article
543
Experimental study of a tubeless convex type solar collector
544
Experimental study of a turbulent boundary layer flow over a windbreak of semi-circular section
545
Experimental Study of a Two-Phase Thermosyphon Loop in Conditions of High Fluidic and Thermal Loads
546
Experimental study of a two-phase two-component critical flow in a converging-diverging nozzle
547
Experimental study of a two-stage adsorption freezing machine driven by low temperature heat source
548
Experimental study of a woven fiberglass composite delamination under impact shock
549
Experimental study of a zero water consumption wet FGD system
550
Experimental study of abrasive process
551
Experimental study of accelerated leaching on hollow cylinders of mortar
552
Experimental study of acetone removal by packed-bed dielectric barrier discharge reactor
553
Experimental study of acidity-consuming processes in mining waste rock: some influences of mineralogy and particle size
554
Experimental study of acoustic agglomeration of coal-fired fly ash particles at low frequencies
555
Experimental Study of Active Vibration Control of Planar 3-RRR Flexible Parallel Robots Mechanism
556
Experimental study of adsorption chiller driven by variable heat source
557
Experimental study of advanced cogeneration system with ammonia–water mixture cycles at bottoming
558
Experimental study of aerodynamic damping in arrays of vibrating cantilevers
559
Experimental study of aerogel Cherenkov detectors for particle identification
560
Experimental study of aerogel Cherenkov detectors for particle identification
561
Experimental study of aerosol reentrainment from flashing pool during controlled filtered venting of the containment after a severe core melt accident
562
Experimental study of air entrainment mode with natural ventilation using shafts in road tunnel fires
563
Experimental study of air flow by natural convection in a closed cavity: Application in a domestic refrigerator Original Research Article
564
Experimental study of air gap and direct contact membrane distillation configurations: application to geothermal and seawater desalination Original Research Article
565
Experimental study of air injection effect on a surface to prevent ice formation
566
Experimental study of air leakage from cracks in reinforced concrete walls Original Research Article
567
Experimental study of air natural convection on metallic foam-sintered plate
568
Experimental study of air squeeze effect on high-frequency friction contact
569
Experimental Study of Air-Cooled Parallel Plate Fin Heat Sinks with and without Circular Pin Fins between the Plate Fins
570
Experimental study of airflow and particle characteristics of a 300-mm POUP/LPU minienvironment system
571
Experimental Study of Airfoil Aerodynamic Behavior under Oscillating Motion in Ground Effect
572
Experimental study of air–water countercurrent annular flow under post-flooding conditions
573
Experimental study of air–water flow in downward sloping pipes
574
Experimental study of air–water two-phase flow in an 8 × 8 rod bundle under pool condition for one-dimensional drift-flux analysis
575
Experimental study of aluminum particle flame evolution in normal and micro-gravity
576
Experimental study of aluminum–fluoride complexation in near-neutral and alkaline solutions to 300 °C
577
Experimental study of aluminum-induced crystallization of amorphous silicon thin films
578
Experimental study of ammonia removal from water by membrane distillation (MD): The comparison of three configurations
579
Experimental study of ammonia removal from water by modified direct contact membrane distillation Original Research Article
580
Experimental study of amorphous silicate formation
581
Experimental study of amplitude and phase detection limits in electron holography
582
Experimental study of amplitude and phase detection limits in electron holography
583
Experimental study of amplitude asymmetry effects in perpendicular recording
584
Experimental Study of an Acoustically Excited Plane Jet at Low Reynolds Numbers
585
Experimental study of an air conditioning system to control a greenhouse microclimate
586
Experimental study of an air-source heat pump for simultaneous heating and cooling – Part 1: Basic concepts and performance verification
587
Experimental study of an air-source heat pump for simultaneous heating and cooling – Part 2: Dynamic behaviour and two-phase thermosiphon defrosting technique
588
Experimental study of an Al2O3/WC–Co nanocomposite based on a failure analysis of hammer bit
589
Experimental Study of an All-Steel Two-Segment Core Buckling Restrained Brace
590
Experimental study of an ammonia-water absorption chiller
591
Experimental study of an ammonia–water bubble absorber using a plate heat exchanger for absorption refrigeration machines
592
Experimental study of an auto-controlled automobile air conditioning system with an externally-controlled variable displacement compressor
593
Experimental study of an automotive Diesel engine efficiency when running under stoichiometric conditions
594
Experimental study of an energy efficient hybrid system for surface drying
595
Experimental study of an impinging jet with different swirl rates
596
Experimental study of an improved air source heat pump
597
Experimental study of an innovative solar water desalination system utilizing a passive vacuum technique
598
Experimental study of an integrated basin solar still with a sandy heat reservoir Original Research Article
599
EXPERIMENTAL STUDY OF ANTIMONY INDUCED RENAL TOXICITY IN RABBITS
600
Experimental Study of Application of Nano-Filtration Membrane Bioreactor (NF-MBR) for Hospital Wastewater Treatment in Iran
601
Experimental study of applying colloidal nano Silica in improving sand-silt mixtures
602
Experimental Study of Applying Natural Zeolite as A Partial Alternative for Cement in SelfCompacting Concrete (SCC)
603
Experimental study of ash formation during pulverized coal combustion in O2/CO2 mixtures
604
Experimental study of asphaltene precipitation prediction during gas injection to oil reservoirs by interfacial tension measurement
605
Experimental study of asphaltic concrete dynamic properties as an impervious core in embankment dams
606
Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube
607
Experimental study of back-draft in a compartment with openings of different geometries
608
Experimental Study of Baffle Angle Effect On Heat Transfer Effectiveness Of The Shell and Tube Heat Exchanger Using Helical Baffle
609
Experimental study of basin-type, multiple-effect, diffusion-coupled solar still Original Research Article
610
Experimental study of beam hardening artifacts in photon counting breast computed tomography
611
Experimental study of beam hardening artifacts in photon counting breast computed tomography
612
Experimental study of beam–slab substructures subjected to a penultimate-internal column loss
613
Experimental Study of Bearing Capacity of Granular Soils, Reinforced with Innovative Grid-Anchor System
614
Experimental Study of Bed Load Transport through Emergent Vegetation
615
Experimental study of Bed Pattern around the Cylindrical Pile under Broken Waves
616
Experimental Study of Behaviour of Reactive Powder Concrete Strengthening by NSM-CFRP Corbels
617
Experimental study of bifurcation and chaos in the buck-boost converter
618
Experimental study of bioaccumulation and effects of the herbicide isoproturon on freshwater rooted macrophytes (Elodea densa and Ludwigia natans)
619
Experimental study of biogas combustion in an HCCI engine for power generation with high indicated efficiency and ultra-low NOx emissions
620
Experimental study of biological mechanism in treating of fracture by chinese herbal medicine
621
Experimental study of biporous wicks for high heat flux applications
622
Experimental study of bluff-body stabilized LPG–H2 jet diffusion flame with preheated reactant
623
Experimental study of body charging in combustion products with soot particles
624
Experimental study of boiling incipience in a closed loop vertical annular thermosiphon
625
Experimental study of bolted connections using light gauge channel sections and packing plates at the joints
626
Experimental study of bond of NSM-FRP reinforcement
627
Experimental Study of Bowed-twisted Stators in an Axial Transonic Fan Stage
628
Experimental Study of Breaching of an Earthen Dam using a Fuse Plug Model
629
Experimental Study of Brightness Surface Temperature Angular Variations of Maritime Pine (Pinus pinaster) Stands
630
Experimental study of bubble formation at metal porous spargers: Effect of liquid properties and sparger characteristics on the initial bubble size distribution
631
Experimental study of bubble growth in Stromboli basalt melts at 1 atm
632
Experimental study of bubble injection in a turbulent boundary layer
633
Experimental study of bubble size distribution in a liquid column exposed to a rotating magnetic field
634
Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading
635
Experimental study of buoyancy-driven flow in open-cell aluminium foam heat sinks
636
Experimental study of burning rate in hydrocarbon pool fires
637
Experimental study of burr formation and tool chipping in the face milling of stainless steel
638
Experimental study of cadmium interaction with periphytic biofilms
639
Experimental study of cake formation on heat treated and membrane coated needle felts in a pilot scale pulse jet bag filter using optical in-situ cake height measurement
640
Experimental Study of Calcination-Carbonation Process for the Production of Precipitated Calcium Carbonate
641
Experimental study of cancellous bone under large strains and a constitutive probabilistic model
642
Experimental study of cancellous bone under large strains and a constitutive probabilistic model
643
Experimental study of capillary pumped loop for integrated power in gravity field
644
Experimental study of capillary-assisted evaporators
645
Experimental study of capillary-assisted water evaporators for vapour-absorption systems
646
Experimental Study of Carbon Dioxide Absorption in Diethyl Ethanolamine (DEEA) in the Presence of Titanium Dioxide (TiO2)
647
Experimental study of carbon fiber reinforced plastic with embedded optical fibers
648
Experimental study of carbon materials behavior under high temperature and VUV radiation: Application to Solar Probe+ heat shield
649
Experimental study of carbon monoxide for woods under spontaneous ignition condition
650
Experimental study of catalytic CO oxidation over CuO/Al2O3 deposited on metal sheets
651
Experimental Study of Cavitation and Hydraulic Flip Effects on Liquid Jet Characteristics into Crossflows
652
Experimental Study of Cavitation and Hydraulic Flip Effects on Liquid Jet Characteristics into Crossflows
653
Experimental study of cavitation damage on hydrogen-terminated and oxygen-terminated diamond film surfaces
654
Experimental study of cell pattern formation induced by internal heat sources in a horizontal fluid layer
655
Experimental study of cellular instability and extinction of non-premixed opposed-flow tubular flames
656
Experimental study of cellular shedding vortices behind a tapered circular cylinder
657
Experimental study of cement grout: Rheological behavior and sedimentation
658
Experimental Study of Cerium Oxide Nanoparticles (CeNP) Against Malathion Induced Lung Oxidative Toxic Stress in Rats
659
Experimental study of CFRP components subjected to dynamic crash loads
660
Experimental study of CFRP fluid-filled tubes subjected to high-velocity impact
661
Experimental study of CFRP-prestressed high-strength concrete bridge beams
662
Experimental study of chaos synchronization in the Belousov–Zhabotinsky chemical system
663
Experimental study of chaotic advection regime in a twisted duct flow
664
Experimental study of char thermal deactivation
665
Experimental study of characteristic curves of centrifugal pumps working as turbines in different specific speeds
666
Experimental Study of Charging Efficiencies and Losses of Submicron Aerosol Particles in a Cylindrical Tri-Axial Charger
667
Experimental Study of Chemical Absorption of CO2 in a Bench-Scale Spray Dryer Absorber
668
Experimental study of chemical conversion of methanol and ethylene glycol in a film boiling reactor
669
Experimental Study of Chemical De-scaling-I: Effect of Acid Concentration
670
Experimental study of chemical kinetics and simulation of 5-O-caffeoylquinic acid oxidation during manufacturing of mate (Ilex Paraguariensis)
671
Experimental study of chemical treatment of coal fly ash to reduce the mobility of priority trace elements
672
Experimental study of chilled water by using aluminum (Al) Nanofluid
673
Experimental study of Cl solubility in hydrous alkaline melts: constraints on the theoretical maximum amount of Cl in trachytic and phonolitic melts
674
Experimental study of clinopyroxenite partial melting and the origin of ultra-calcic melt inclusions
675
Experimental Study of CO2 Absorption in Potassium Carbonate Solution Promoted by Triethylenetetramine
676
Experimental study of CO2 hydrate formation kinetics with and without kinetic and thermodynamic promoters
677
Experimental Study of Coal Gasification Coupling with Natural Gas Autothermal Re-Forming for Synthesis Gas Production
678
Experimental study of coal liberation: Electrical disintegration versus roll-crusher comminution
679
Experimental Study of Coal Topping Process in a Downer Reactor
680
Experimental Study of Coating in a Bottom Sprayed Fluidized Bed
681
Experimental study of collision between a free–free beam and a simply supported beam
682
Experimental study of combustion and emission characteristics of ethanol fuelled port injected homogeneous charge compression ignition (HCCI) combustion engine
683
Experimental study of combustion in a double-layer burner packed with alumina pellets of different diameters
684
Experimental study of combustion in a spark ignition engine operating with producer gas from various biomass feedstocks
685
Experimental study of combustion of hydrogen–syngas/methane fuel mixtures in a porous burner
686
Experimental study of commercial size proton exchange membrane fuel cell performance
687
Experimental study of compact FEL with micro wiggler and electrostatic accelerator
688
Experimental study of compact FEL with micro wiggler and electrostatic accelerator
689
EXPERIMENTAL STUDY OF COMPOSITE STRUCTURES IN AUTOMOTIVE APPLICATIONS
690
Experimental study of compressibility, roughness and rarefaction influences on microchannel flow
691
Experimental study of compressive strength, permeability and impact testing in geopolymer concrete based on Blast furnace slag
692
Experimental study of concentration polarization in a crossflow reverse osmosis system using Digital Holographic Interferometry Original Research Article
693
Experimental study of concrete abrasion due to ice friction — Part I: Set-up, ice abrasion vs. material properties and exposure conditions
694
Experimental study of concrete abrasion due to ice friction — Part II: Statistical representation of abrasion rates and simple, linear models for estimation
695
Experimental Study of Concrete Subjected to Explosive Loading
696
Experimental study of condensation heat transfer of R-134a flow in corrugated tubes with different inclinations
697
Experimental study of conjugate heat transfer within a bottom heated vertical concentric cylindrical enclosure
698
Experimental study of constructal distributor for flow equidistribution in a mini crossflow heat exchanger (MCHE)
699
Experimental study of contaminant mixing through the buried river junctions
700
Experimental Study of Control of Human Body Electrostatic Discharge (ESD) Using Passive and Active Guard Electrodes
701
Experimental study of convection and radiation interaction in a headlight model using pressure variation
702
Experimental study of convective condensation in an inclined smooth tube. Part I: Inclination effect on flow pattern and heat transfer coefficient
703
Experimental study of convective condensation in an inclined smooth tube. Part II: Inclination effect on pressure drops and void fractions
704
Experimental study of convective heat transfer and pressure drop of TiO2/water nanofluid
705
Experimental study of convective heat transfer coefficient of MgO nanofluid in a cylindrical microchannel heat sink
706
Experimental study of convective heat transfer from in-line cam shaped tube bank in crossflow
707
Experimental study of convective heat transfer from the surface of a gyratory lantern
708
Experimental study of convective heat transfer from windows with Venetian blinds
709
EXPERIMENTAL STUDY OF CONVECTIVE HEAT TRANSFER INSTABILITIES IN TRANSIENT RESPONSE ALONG A COUNTERCURRENT HEAT EXCHANGER
710
Experimental study of cooling effects of a passive evaporative cooling wall constructed of porous ceramics with high water soaking-up ability
711
Experimental Study of Corner Stall in a Linear Compressor Cascade
712
Experimental study of corrosion behavior for burnished aluminum alloy by EWF, EBSD, EIS and Raman spectra
713
Experimental study of corrosion fatigue behaviour of welded steel structures
714
Experimental study of corrosion of two stainless steels during the oxidative bacterial dissolution of pyrite using mass loss and electrochemical techniques
715
Experimental study of cosmonuclear physics at J-PARC Original Research Article
716
Experimental study of coupled vibration in a finite periodic dual-layered structure with transverse connection
717
Experimental study of CPC type ICS solar systems
718
Experimental study of cracking methane by Ni/SiO2 catalyst
719
Experimental study of critical heat flux enhancement during forced convective flow boiling of nanofluid on a short heated surface
720
Experimental study of crosswind effects on the performance of small cylindrical natural draft dry cooling towers
721
Experimental study of crushed aggregate shape
722
Experimental study of cryogen spray properties for application in dermatologic laser surgery
723
Experimental study of Cu isotope fractionation during the reaction of aqueous Cu(II) with Fe(II) sulphides at temperatures between 40 and 200 °C
724
Experimental study of current-dependent grounding resistance of rod electrode
725
Experimental Study of Cyclic Seismic Behavior of Steel Moment Connections Reinforced with Ribs
726
Experimental study of debris head loss through a pressurized water reactor recirculation sump screen after LOCA
727
Experimental study of deep drawability of hot rolled IF steel
728
Experimental study of delayed feedback control for a flexible plate
729
Experimental study of DEMO helium cooled divertor target mock-ups to estimate their thermal and pumping efficiencies
730
Experimental study of density-driven convection effects on CO2 dissolution rate in formation water for geological storage
731
Experimental study of desalination using direct contact membrane distillation: a new approach to flux enhancement
732
Experimental study of detritiation system catalyst poisoning
733
Experimental study of difference between streaming current and electroosmosis in single fused silica capillaries
734
Experimental study of different carbon dust growth mechanisms
735
Experimental study of diffusion flame oscillations and empirical correlations
736
Experimental study of diffusion welding/bonding of titanium to copper
737
Experimental study of directional aperture-coupled large-offset patch antenna with OS and BGP
738
experimental study of discharge coefficient of combination labyrinth weirs
739
Experimental study of discharge rate fluctuations in a silo with different hopper geometries
740
Experimental Study of Discriminative Adaptive Training and MLLR for Automatic Pronunciation Evaluation
741
Experimental study of disk vibration reduction via stacked disks
742
Experimental study of dislocation mobility in a Ti–6Al–4V alloy Original Research Article
743
Experimental study of distiller with heat pipe utilizing waste heat from a portable electric generator Original Research Article
744
Experimental study of distribution of energy during EDM process for utilization in thermal models
745
Experimental study of DOC, nutrients and metals release from forest floors developed under beech (Fagus sylvatica L.) on a Cambisol and a Podzol
746
Experimental study of domestic sewage treatment with a metal membrane bioreactor Original Research Article
747
Experimental study of drag reduction by a polymeric additive in slug two-phase flow of crude oil and air in horizontal pipes
748
Experimental study of drag-reduction mechanism for a dilute surfactant solution flow
749
Experimental study of drilling composite materials with step-core drill
750
Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up
751
Experimental study of drilling sub-10 mm holes in thin metal foils with femtosecond laser pulses
752
Experimental study of drop impacts and spreading on epicarps: Effect of fluid properties Original Research Article
753
Experimental study of drop-interface coalescence in the presence of polymer stabilisers
754
Experimental study of droplet temperature in a two-phase heptane/air V-flame
755
Experimental Study of Droplet Transport Time between Nozzles and Target
756
Experimental study of dropwise condensation on plasma-ion implanted stainless steel tubes
757
Experimental study of dry deposition of dust on the glass surface
758
Experimental study of dry reforming of biogas in a tubular anode-supported solid oxide fuel cell
759
Experimental study of drying kinetics by forced convection of aromatic plants
760
Experimental study of dual fuel engine performance using variable LPG composition and engine parameters
761
EXPERIMENTAL STUDY OF DUCTILITY ADEQUACY ON INTERIOR WALL-SLAB JOINT SUBJECTED TO LATERAL CYCLIC LOADING
762
Experimental study of dye removal from industrial wastewater by membrane technologies of reverse osmosis and nanofiltration
763
Experimental study of dynamic and noise produced by a gearing excited by a multi-harmonic excitation
764
Experimental study of dynamic barite sag in oil-based drilling fluids using a modified rotational viscometer and a flow loop
765
Experimental study of dynamic behaviors and routes to chaos in DC–DC boost converters
766
Experimental study of dynamic compressive properties of fibre reinforced concrete material with different fibres
767
Experimental study of dynamic crushing of thin plates stiffened by stamping with V-grooves
768
Experimental study of dynamic post-buckling characteristics of columns under fluid–solid slamming
769
Experimental Study of Dynamic Propagation of Local Snap-through in Single-layer Braced Domes
770
Experimental study of early-age behavior of high performance concrete deck slabs under different curing methods
771
Experimental study of effect of an inner thermal curtain in evaporative cooling system of a cascade greenhouse
772
Experimental Study of Effect of Glass Fibres on Properties of Concrete Containing Micro-silica and Limestone Powder
773
Experimental study of effect of laser machining process of CO2 on electrical conductivity and magnetic properties of PMMA/MWCNT composite
774
Experimental study of effective efficiency in a ceramic coated diesel engine
775
Experimental Study of Effective Parameters in Production of Carbamazepine Nanoparticles
776
Experimental Study of Effective Parameters on Honing Process of Cast Iron Cylinder
777
Experimental Study of Effects of Fly Ash On the Mechanical Properties of Hybrid Fiber Reinforced Cementitious Composite
778
Experimental Study of Effects of GO-SiO2-TiO2–SDS Hybrid Nanofluids on Interfacial Tension by Du Noüy Ring Method
779
Experimental study of efficiency of natural oxide layers for reduction of tritium permeation through Eurofer 97
780
EXPERIMENTAL STUDY OF EFFICIENT WIRELESS POWER TRANSFER SYSTEM INTEGRATING WITH HIGHLY SUB-WAVELENGTH METAMATERIALS
781
Experimental study of EHD conduction pumping at the meso- and micro-scale
782
Experimental study of electrical resistivity and flow stress of stainless steel 316L in electroplastic deformation
783
Experimental study of electrohydrodynamic pumping through conduction phenomenon
784
Experimental study of electromagnetic properties of the muon neutrino in neutrino-electron scattering
785
Experimental Study of Electro-Mechanical Dual Acting Pulley Continuously Variable Transmission Ratio Calibration
786
Experimental study of Electro-Plastic Effect on Advanced High Strength Steels
787
Experimental study of electroplastic effect on stainless steel wire 304L
788
Experimental study of electroplastic effect on stainless steel wire 304L
789
Experimental Study of Electrostatic Capture Mechanisms in Commercial Electret Filters
790
Experimental study of electrostatic precipitator performance and comparison with existing theoretical prediction models
791
Experimental study of ELID grinding based on the active control of oxide layer
792
Experimental study of ELNES at grain boundaries in alumina: intergranular radiation damage effects on Al-L23 and O-K edges
793
Experimental study of ELNES at grain boundaries in alumina: intergranular radiation damage effects on Al-L23 and O-K edges
794
EXPERIMENTAL STUDY OF ENERGY DISSIPATION OVER STEPPED GABION SPILLWAYS WITH LOW HEIGHTS
795
Experimental Study of Energy Efficiency of a Single Microtube
796
Experimental study of entrainment phenomenon in a trapped vortex combustor
797
Experimental study of environmental tobacco smoke particles under actual indoor environment
798
Experimental study of epoxy repairing of cracks in concrete
799
Experimental study of ethylene counterflow diffusion flames perturbed by trace amounts of jet fuel and jet fuel surrogates under incipiently sooting conditions
800
Experimental study of evaporating water–ethanol mixture sessile drop: influence of concentration
801
Experimental study of evaporation and isotopic mass fractionation of potassium in silicate melts
802
Experimental Study of Evaporation from Saline Tailings
803
Experimental study of evaporation heat transfer characteristics of refrigerants R-134a and R-407C in horizontal small tubes
804
Experimental study of evaporation pressure drop characteristics of refrigerants R-134a and R-407C in horizontal small tubes
805
Experimental Study of Evolution of Aqueous SiO2 in the Mineral Water in Basalt Beds of Jingyu County, China
806
Experimental study of excitation functions for the deuteron induced reactions 64Zn(d,2p)64Cu and 64Zn(d,αn)61Cu using the stacked-foil technique
807
Experimental study of externally prestressed segmental beam under torsion
808
Experimental study of extinction and its quantification in laminar and turbulent counterflow CH4–N2/O2–N2 nonpremixed flames
809
Experimental study of extinction of nonadiabatic counterflow premixed flames
810
Experimental study of extreme thrust on a tidal stream rotor due to turbulent flow and with opposing waves
811
Experimental study of failure and failure progression in T-stiffened skins
812
Experimental study of falling film evaporation heat transfer outside horizontal tubes Original Research Article
813
Experimental study of fast electron propagation in compressed matter
814
Experimental study of fast electron propagation in compressed matter
815
Experimental study of fatigue crack growth behaviour in adhesively reinforced steel structures
816
Experimental Study of Fe-Mg Exchange Reaction Between Orthopyroxene and Sapphirine and its Calibration as a Geothermometer
817
Experimental study of fibers in stabilizing and reinforcing asphalt binder
818
Experimental study of filling capacity of self-compacting concrete and its influence on the properties of rock-filled concrete
819
Experimental study of film flow and heat/mass transfer in LiBr–H2O solution flowing over a cooled horizontal tube
820
Experimental study of film media used for evaporative pre-cooling of air
821
EXPERIMENTAL STUDY OF FILTER CAKE FORMATION ON DIFFERENT FILTER MEDIA
822
Experimental study of filter clogging with monodisperse PSL particles
823
Experimental study of filterability behavior of model extracellular polymeric substance solutions in dead-end membrane filtration Original Research Article
824
Experimental study of filtration efficiency of nanoparticles below 20 nm at elevated temperatures
825
Experimental study of filtration system performance of natural gas in urban transmission and distribution network: A case study on the city of Kerman, Iran
826
Experimental study of fine particles removal in the desulfurated scrubbed flue gas
827
Experimental Study of Fire Retardant Coating
828
Experimental study of fire tube boilers performance for public heating
829
Experimental study of fixed-vane revolving vane compressor
830
Experimental study of flammability limits of oxy-methane mixture and calculation based on thermal theory
831
Experimental study of flash atomization of binary hydrocarbon liquids
832
Experimental study of flash evaporation of a water film
833
Experimental study of flat light-scattering substrates in thin-film silicon solar cells
834
Experimental study of flax FRP tube encased coir fibre reinforced concrete composite column
835
Experimental study of flow and heat transfer characteristics of natural convection in an enclosure with horizontal parallel heated plates
836
Experimental study of flow and heat transfer in rib-roughened rectangular channels
837
Experimental study of flow boiling heat transfer and dryout characteristics at low mass flux in helically-coiled tubes
838
Experimental study of flow boiling of FC-72 in parallel minichannels under sub-atmospheric pressure
839
Experimental Study of Flow Control on Bluff Body using Piezoelectric Actuators
840
Experimental Study of Flow Control on Bluff Body using Piezoelectric Actuators
841
Experimental Study of Flow in a Vortex Drop Shaft
842
EXPERIMENTAL STUDY OF FLOW PAST A LOW-RISE BUILDING
843
Experimental study of flow pattern and heat transfer associated with a bubble sliding on downward facing inclined surfaces
844
Experimental study of flow patterns in deoiling hydrocyclone
845
Experimental study of flow-induced crystallization in the blends of isotactic polypropylene and poly(ethylene-co-octene)
846
Experimental study of fluid flow and heat transfer characteristics in the square channel with a perforation baffle
847
Experimental study of fluid flow in horizontal and deviated wells during the artificial gas lift process
848
Experimental study of fluid flow in the entrance of a sinusoidal channel
849
Experimental study of fluid transport processes in the matrix system of the European organic-rich shales: I. Scandinavian Alum Shale
850
Experimental study of fly ash precipitation in a model electrostatic precipitator with discharge electrodes of different design
851
Experimental Study of Foam Flooding in Low Permeability Sandstones: Effects of Rock Permeability and Microscopic Heterogeneity
852
Experimental study of foam flow in horizontal pipes: Two flow regimes and its implications
853
Experimental study of forced and free convective heat transfer in the thermal entry region of horizontal concentric annuli
854
Experimental study of forced circulation evaporator in zero discharge desalination process Original Research Article
855
Experimental study of forced convection from helical coiled tubes with different parameters
856
Experimental study of forced convection heat transfer from a cam shaped tube in cross flows
857
Experimental study of forced convection in asymmetrically heated sintered porous channels with/without periodic baffles
858
Experimental study of forced convective boiling for non-azeotropic refrigerant mixtures R-22/R-124 in horizontal smooth tube
859
Experimental study of forced convective heat transfer from a vertical tube conveying dilute Ag/DI water nanofluids in a cross flow of air
860
Experimental study of forced convective heat transfer in a different arranged corrugated channel
861
Experimental study of forced convective heat transfer of nanofluids in a microchannel
862
Experimental Study of Forced Heat Convection through a Vertical Porous Annuli
863
Experimental study of forming and tightening processes with thread forming screws
864
Experimental study of fracture behavior of magnesium single crystals
865
Experimental study of fracture toughness and energy in composite materials
866
Experimental study of free convection from a pair of vertical arrays of horizontal cylinders at very low Rayleigh numbers
867
Experimental study of free convective heat transfer in a direction-sensitive open cavity
868
Experimental study of friction and heat transfer characteristics in narrow rectangular channel
869
Experimental study of friction in sheet metal forming
870
Experimental study of friction reducer flows in microfracture
871
Experimental study of frost accumulation on fan-supplied tube-fin evaporators
872
Experimental study of FRP confined concrete cylinders
873
Experimental study of FRP tube encased concrete cylinders exposed to fire
874
Experimental study of FRP-strengthened RC bridge girders subjected to fatigue loading
875
Experimental study of fruit temperature dynamics within apple tree crowns
876
Experimental study of fuel decomposition and hydrocarbon growth processes for cyclohexane and related compounds in nonpremixed flames
877
Experimental study of fuel decomposition and hydrocarbon growth processes for practical fuel components: heptanes
878
Experimental Study of Fuel Regression Rate in a HTPB/N2O Hybrid Rocket Motor
879
Experimental study of fuel stratification for HCCI high load extension
880
Experimental study of gas and liquid permeability of a mortar
881
Experimental study of gas diffusion in cement paste
882
Experimental study of gas humidification with injectors for automotive PEM fuel cell systems
883
Experimental study of gas hydrate formation and destabilisation using a novel high-pressure apparatus
884
Experimental study of gas production from hydrate dissociation with continuous injection mode using a three-dimensional quiescent reactor
885
Experimental study of gas/solid system mechanics of binary mixture of particles differing in size and/or density by one order of magnitude
886
Experimental study of gas-dynamically induced nanoparticle synthesis by use of adapted sampling probes
887
Experimental study of gaseous and particulate contaminants distribution in an aircraft cabin
888
Experimental study of gaseous effluent and solid conversion in a fluidized bed hydrolysis reactor for hydrogen production
889
Experimental Study of gas–liquid two-phase flow affected by wall surface wettability
890
Experimental study of gear rattle excited by a multi-harmonic excitation
891
Experimental study of geotextile as plinth beam in a pile group-supported modeled building frame
892
Experimental study of geotextile\ʹs drainage and filteration propertis under different hydraulic gradients and confining pressures
893
Experimental Study of Germanium Dry Machining with Various Rake Angles and Different Feed Rates of Tool
894
Experimental study of glass-fiber mat thermoplastic material impact properties and lightweight automobile body analysis
895
Experimental Study of Glow Discharge Plasma Properties at the middle Distance between Anode and Cathode for Aluminum Electrodes
896
Experimental study of graded bandgap Cu(InGa)(SeS)2 thin films grown on glass/molybdenum substrates by selenization and sulphidation
897
Experimental study of granular bed filtration of ultrafine particles emitted by a thermal spraying process
898
Experimental study of graphite particle deposition upstream of a forward-facing step
899
Experimental study of grease flow in pipelines: wall slip and air entrainment effects
900
Experimental study of hadron properties in the nuclear medium Original Research Article
901
Experimental Study of Heat and Mass Transfer for Liquid Film Evaporation along a Vertical Plate Covered With a Porous Layer
902
Experimental Study of Heat and Mass Transfer on an Absorber with Several Enhancement Tubes
903
Experimental Study of Heat and Mass Transfer on an Absorber with Several Enhancement Tubes
904
Experimental study of heat regimes on a dry, partially or completely wetted and liquid filled catalyst particle
905
Experimental study of heat transfer additive influence on the absorption chiller performance
906
Experimental study of heat transfer and air flow in a refrigerated display cabinet Original Research Article
907
Experimental study of heat transfer and flow friction insolar air heaters with and without selective absorbers
908
Experimental study of heat transfer and fluid flow in longitudinal rectangular-fin array located in different orientations in fluid flow
909
Experimental study of heat transfer and pressure drop in micro-channel based heat sinks with tip clearance
910
Experimental study of heat transfer and thermal performance with longitudinal fins of solar air heater
911
Experimental Study of Heat Transfer Augmentation Characteristics of a Tube Affected by Geometric Parameters of Coiled Spring Inserts
912
Experimental study of heat transfer by natural convection in a closed cavity: application in a domestic refrigerator Original Research Article
913
Experimental study of heat transfer characteristic on jet impingement cooling with film extraction flow
914
Experimental study of heat transfer characteristics for a refrigerator by using reverse heat loss method
915
Experimental study of heat transfer characteristics of nanofluid nucleate and film boiling on horizontal flat plate
916
Experimental study of heat transfer characteristics of supercritical CO2 fluid in collectors of solar Rankine cycle system
917
Experimental study of heat transfer coefficient on hot steel plate during water jet impingement cooling
918
Experimental study of heat transfer coefficients in ITER vacuum vessel cooling channels
919
EXPERIMENTAL STUDY OF HEAT TRANSFER DURING FILM CONDENSATION IN TRANSIENT CONDITIONS IN A VERTICAL SMOOTH TUBE
920
Experimental study of heat transfer enhancement in a drag-reducing two-dimensional channel flow
921
Experimental study of heat transfer enhancement in a flat-plate solar water collector with wire-coil inserts
922
Experimental Study of Heat Transfer Enhancement in a Heated Tube Caused by Wire-Coil and Rings
923
Experimental study of heat transfer enhancement in an asymmetrically heated rectangular duct with perforated baffles
924
Experimental study of heat transfer enhancement in electrohydrodynamic conduction pumping of liquid film using flush electrodes
925
Experimental study of heat transfer enhancement using water/ethylene glycol based nanofluids as a new coolant for car radiators
926
Experimental study of heat transfer enhancement with wire coil inserts in laminar-transition-turbulent regimes at different Prandtl numbers
927
Experimental study of heat transfer in oscillating flow
928
Experimental study of heat transfer in pulsating turbulent flow in a pipe
929
Experimental study of heat transfer intensification by using a novel combined shelf in food refrigerated display cabinets (Experimental study of a novel cabinets)
930
Experimental study of heat transfer of buried finned pipe for ground source heat pump applications
931
Experimental study of heat transfer performance in a flattened AGHP
932
Experimental Study of Heat Transfer Rate in a Shell and Tube Heat Exchanger with Air Bubble Injection (TECHNICAL NOTE)
933
Experimental study of heavy oil underground aquathermolysis using catalyst and ultrasonic
934
Experimental study of high electric current effects in carbon/epoxy composites
935
Experimental study of high frequency stochastic resonance in Chua circuits
936
Experimental study of high-density gas–solids flow in a new coupled circulating fluidized bed
937
Experimental study of high-energy resolution lead/scintillating fiber calorimetry in the 600–1200 MeV energy region
938
Experimental study of high-energy resolution lead/scintillating fiber calorimetry in the 600–1200 MeV energy region
939
Experimental study of high-power pulse side-pumped Nd:YAG laser
940
Experimental study of high-power, saturated amplification in a sheet-beam, small-period-wiggler FEL (with applications to magnetic fusion research)
941
Experimental study of high-power, saturated amplification in a sheet-beam, small-period-wiggler FEL (with applications to magnetic fusion research)
942
Experimental study of high-pressure turbulent premixed flames
943
Experimental study of high-temperature foam for acid diversion
944
Experimental study of high-velocity impact and fracture of ice
945
Experimental Study of Homogenizing Tahina by Using Common Food Additives
946
Experimental Study of Horizontal Barrier Formation by Colloidal Silica
947
Experimental study of hot air dehydration of Sultana grapes Original Research Article
948
Experimental study of hot deformation behavior in API X65 steel
949
Experimental study of human-induced dynamic forces due to jumping on a perceptibly moving structure
950
Experimental study of humic acid adsorption onto bacteria and Al-oxide mineral surfaces
951
Experimental study of hybrid composite beams
952
Experimental study of hybrid composite cylinders
953
Experimental study of hybrid FRP reinforced concrete beams
954
Experimental study of hydraulic engine mounts using multiple inertia tracks and orifices: Narrow and broad band tuning concepts
955
Experimental Study of Hydraulic Flow of Circular Piano-Key Inlet in Shaft Spillways
956
Experimental study of hydraulic fracturing for shale by stimulated reservoir volume
957
Experimental study of hydraulic-sediment properties on deltaic sedimentation in reservoirs
958
Experimental study of hydrocarbon hydrogenation and dehydrogenation reactions in silicon microfabricated reactors of two different geometries
959
Experimental study of hydrocarbon mixtures to replace HFC-134a in a domestic refrigerator
960
EXPERIMENTAL STUDY OF HYDROCARBON R290 IN WATER COOLER REFRIGERATION SYSTEM
961
Experimental study of hydrocarbon structure effects on the composition of its pyrolysis products
962
Experimental study of hydrocarbon structure effects on the composition of its pyrolysis products
963
Experimental study of hydrodynamic characteristics of improved sieve tray with push valves
964
Experimental study of hydrodynamics in a flat ohmic cell—impact on fouling by dairy products Original Research Article
965
Experimental Study of Hydrogen and Methane Permeation through Asymmetric PEI Membranes
966
Experimental study of hydrogen embrittlement on AISI 304 stainless steels and Rayleigh wave characterization
967
Experimental study of hydrogen fluoride adsorption on sodium fluoride
968
Experimental study of hydrogen production and soot particulate matter emissions from methane rich-combustion in inert porous media
969
Experimental study of hydrogen production from reforming of methane and ammonia assisted by Laval nozzle arc discharge
970
Experimental study of hydrogen release accidents in a vehicle garage
971
Experimental study of hydrogen releases in the passenger compartment of a Piaggio Porter
972
Experimental study of hydrogen storage with reaction heat recovery using metal hydride in a totalized hydrogen energy utilization system
973
Experimental study of hydrogen, carbon dioxide and nitrogen permeation through a microporous silica membrane
974
Experimental study of hydrogen-rich/oxygen-rich gas–gas injectors
975
Experimental study of hydronic panels system and its environment
976
Experimental study of hydrothermal flames formation using a tubular injector in a refrigerated reaction chamber. Influence of the operational and geometrical parameters
977
Experimental study of hydrothermal flames initiation using different static mixer configurations
978
Experimental study of hydroxyalkyl peroxy radicals from OH-initiated reactions of isoprene
979
Experimental study of ice accretion on circular cylinders at moderate low temperatures
980
Experimental study of ice slurry performance in a standard fan coil
981
Experimental Study of IFTReduction in Fracture Carbonate Reservoir by Triton X-100
982
Experimental study of ignited unsteady hydrogen jets into air
983
Experimental study of ignited unsteady hydrogen releases from a high pressure reservoir
984
Experimental study of ignition of magnesium powder by electrostatic discharge
985
Experimental study of ILU preconditioners for indefinite matrices
986
Experimental study of immediate and time-dependent deflections of GFRP reinforced concrete beams
987
Experimental study of impact resistance in multi-walled carbon nanotube reinforced epoxy
988
Experimental study of impingement spray cooling for high power devices
989
Experimental study of impinging heat transfer along rib-roughened walls by using transient liquid crystal technique
990
Experimental study of improved two step synthesis for DME production
991
Experimental study of indentation fracture toughness in HVOF sprayed hardmetal coatings
992
Experimental study of indoor air quality, energy saving and analysis of ventilation norms in climatised areas
993
Experimental study of induced polarization relaxation time spectra of shaly sands
994
Experimental Study of Inducing Compressive Stress by Anti-welding Heating Treatment in a Thin Plate Weldment with Variant Temperatures
995
Experimental study of industrial gas turbine flames including quantification of pressure influence on flow field, fuel/air premixing and flame shape
996
Experimental study of industrial scale fullerene production by combustion synthesis Original Research Article
997
Experimental study of inelastic buckling strength and stiffness requirements for longitudinally stiffened panels
998
Experimental study of infrared nanosecond laser ablation of silicon: The multi-pulse enhancement effect
999
Experimental study of infrared-convective drying of hydrous ferrous sulphate
1000
Experimental study of initial strengths and hygrothermal degradation of adhesive joints between thin aluminum and steel substrates
