<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Fabrication of planarised conductively patterned diamond for bio-applications
2
Fabrication of planar-type SOFC single cells by a novel vacuum dip-coating method and co-firing/infiltration techniques
3
Fabrication of plant protein microspheres for encapsulation, stabilization and in vitro release of multiple anti-tuberculosis drugs
4
Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold
5
Fabrication of Platelet-Rich Fibrin-Coated Polycaprolactone/Hydroxyapatite (PCL-HA/PRF) 3D Printed Scaffolds for Bone Tissue Engineering
6
Fabrication of platinum coated nanoporous gold film electrode: A nanostructured ultra low-platinum loading electrocatalyst for hydrogen evolution reaction
7
Fabrication of platinum coating on continuous porous SiC–Si3N4 composites by the electroless deposition process
8
Fabrication of platinum nanoparticles in aqueous solution and solid phase using amphiphilic PB-b-PEO copolymer nanoreactors
9
Fabrication of platinum particles by intense, femtosecond laser pulse irradiation of aqueous solution
10
Fabrication of PLGA scaffolds using soft lithography and microsyringe deposition
11
Fabrication of PLGA/MWNTs composite electrospun fibrous scaffolds for improved myogenic differentiation of C2C12 cells
12
Fabrication of PLGA-Collagen Hybrid Sponge
13
Fabrication of polar CoO(1 1 1) thin films on Pt(1 1 1)
14
Fabrication of poly (ECTFE) membranes via thermally induced phase separation
15
Fabrication of Poly (Vinyl Alcohol)/Gelatin Biomimetic Electrospun Nanofibrous Composites and Its Bioactivity Assessment for Bone Tissue Engineering
16
Fabrication of poly(1-vinylimidazole)/mordenite grafting membrane with high pervaporation performance for the dehydration of acetic acid
17
Fabrication of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) microstructures using soft lithography for scaffold applications
18
Fabrication of poly(amide-imide)-polyethersulfone dual layer hollow fiber membranes applied in forward osmosis by combined polyelectrolyte cross-linking and depositions Original Research Article
19
Fabrication of poly(dimethylsiloxane) microfluidic system based on masters directly printed with an office laser printer
20
Fabrication of poly(ether sulfone)/poly(zinc acrylate) ultrafiltration membrane with anti-biofouling properties
21
Fabrication of poly(methyl methacrylate) colloidal monolayer on chemically modified silicon surface and hemispherical platinum nanoshell
22
Fabrication of poly(phosphoester) nerve guides by immersion precipitation and the control of porosity
23
Fabrication of poly(propylene fumarate)-based orthopaedic implants by photo-crosslinking through transparent silicone molds
24
Fabrication of poly(toluidine blue O)/carbon nanotube composite nanowires and its stable low-potential detection of NADH
25
Fabrication of Poly(urethane urea)-based Scaffolds for Bone Tissue Engineering by a Combined Strategy of Using Compression Moulding and Particulate Leaching Methods
26
Fabrication of poly(vinyl alcohol)–apatite hybrids through biomimetic process
27
Fabrication of poly(vinyl alcohol)s (PVAs) nanotubes through the fusion of nanocapsules composed of PVAs multilayer films
28
Fabrication of poly(vinylidene fluoride-co-hexafluropropylene) (PVDF-HFP) asymmetric microporous hollow fiber membranes
29
Fabrication of poly-3-hexylthiophene/polyethylene oxide nanofibers using electrospinning
30
Fabrication of polyacrylonitrile/CuS composite nanofibers and their recycled application in catalysis for dye degradation
31
Fabrication of polyamide thin-film nano-composite (PA-TFN) membrane with hydrophilized ordered mesoporous carbon (H-OMC) for water purifications
32
Fabrication of polyaniline with hierarchical structures in alkaline solution
33
Fabrication of polyaniline/carbon nanotube composite modified electrode and its electrocatalytic property to the reduction of nitrite Original Research Article
34
Fabrication of polyaniline/poly(ethylene oxide)/non-covalently functionalized graphene nanofibers via electrospinning
35
Fabrication of polyaniline/poly(ethylene oxide)/non-covalently functionalized graphene nanofibers via electrospinning
36
Fabrication of polyaniline/silver nanoparticles/multi-walled carbon nanotubes composites for flexible microelectronic circuits
37
Fabrication of polyaniline/silver nanoparticles/multi-walled carbon nanotubes composites for flexible microelectronic circuits
38
Fabrication of polyaniline/titanium dioxide composite nanofibers for gas sensing application
39
Fabrication of Polyaniline/Titanium Dioxide Nanocomposite Anode for Potential Use in Escherichia coli Inoculated Fuel Cell
40
Fabrication of polybenzimidazole (PBI) nanofiltration hollow fiber membranes for removal of chromate
41
Fabrication of Polycaprolactone and Polylactic Acid Shapeless Scaffolds via Fused Deposition Modelling Technology
42
Fabrication of polycaprolactone nanofibrous scaffolds by facile phase separation approach
43
Fabrication of polycarbosilane-derived SiC bulk ceramics by carbothermic reduction: Effect of green density on crystallinity of pyrolyzed compacts
44
Fabrication of polycondensed multilayer thin films by a self-assembly method
45
Fabrication of polycrystalline (Y0.7Gd0.3)2O3:Eu3+ ceramics: The influence of initial pressure and sintering temperature on its morphology and photoluminescence activity
46
Fabrication of polydimethylsiloxane (PDMS) pulsating heat pipe
47
Fabrication of poly-DL-lactide/polyethylene glycol scaffolds using the gas foaming technique
48
Fabrication of polyester microchannels and their applications to capillary electrophoresis
49
Fabrication of polyetherimide microporous membrane using supercritical CO2 technology and its application for affinity membrane matrix
50
Fabrication of polyethersulfone (PES) membranes with nano-porous surface using potassium perchlorate (KClO4) as an additive in the casting solution Original Research Article
51
Fabrication of polyethersulfone-mesoporous silica nanocomposite ultrafiltration membranes with antifouling properties
52
Fabrication of polyethylene glycol/polyvinylidene fluoride core/shell nanofibers via melt electrospinning and their characteristics
53
Fabrication of polyethylene microporous membranes using triethylolpropane tris(2-ethylhexanoate) as a novel diluent by a thermally induced phase separation process
54
Fabrication of polyimide nanotubes and carbon nanotubes containing magnetic iron oxide in confinement
55
Fabrication of polyindene and polyindole nanostructures
56
Fabrication of polymer antireflective coatings by self-assembly of supramolecular block copolymer
57
Fabrication of Polymer Crystals/Ag Nanocomposite by Intercalation
58
Fabrication of polymer derived ceramic parts by selective laser curing
59
Fabrication of polymer electrolyte membrane fuel cell MEAs utilizing inkjet print technology
60
Fabrication of polymer film heat transfer elements for energy efficient multi-effect distillation Original Research Article
61
Fabrication of polymer light emitting diodes with ITO/PVK:TPP/Alq3/AI structure
62
Fabrication of polymer microsphere particle standards containing trace explosives using an oil/water emulsion solvent extraction piezoelectric printing process
63
Fabrication of polymer SAW sensor array to classify chemical warfare agents
64
Fabrication of polymer SAW sensor array to classify chemical warfare agents
65
Fabrication of Polymer/Inorganic Nanoparticles Composite Films Based on TCoordinative Bonds
66
Fabrication of polymer/layered silicate intercalated nanofibrous mats and their bacterial inhibition activity
67
Fabrication of Polymer/Selective-Flake Nanocomposite Membranes and Their Use in Gas Separation
68
Fabrication of Polymeric Chitosan-g-P (ITA-co-AM) Nanocomposite Using Copolymerization and Application to Removal Metformin Drug from Aqueous Solution
69
Fabrication of polymeric microparticles for drug delivery by soft lithography
70
Fabrication of polymeric nanocapsules from curcumin-loaded nanoemulsion templates by self-assembly
71
Fabrication of polymeric nanocapsules from curcumin-loaded nanoemulsion templates by self-assembly
72
Fabrication of polymeric particles composed of two-dimensionally self-assembled nanoparticles by use of a microporous film as a template
73
Fabrication of polymeric PVDF/PDDA ultrathin films on quartz crystal microbalance
74
Fabrication of polymeric surfaces with similar contact angles but dissimilar contact angle hysteresis
75
Fabrication of polymeric thin films by a self-assembly method
76
Fabrication of polymer–platinum(II) complex nanomicelle from mPEG–g-α,β-poly [(N-amino acidyl)-dl-aspartamide] and cis-dichlorodiammine platinum(II) and its cytotoxicity
77
Fabrication of polymer-SiO2 nanocomposite optical fibers with a new method
78
Fabrication of polymer-supported nanosized hydrous manganese dioxide (HMO) for enhanced lead removal from waters Original Research Article
79
Fabrication of polyphenylsulfone/polyetherimide blend membranes for ultrafiltration applications: The effects of blending ratio on membrane properties and humic acid removal performance
80
Fabrication of polypropylene/carbon nanotubes composites via a sequential process of (rotating solid-state mixing)-plus-(melt extrusion)
81
Fabrication of Polypyrrole Hollow Y-junction and Capsule Using Azo-dye Templates
82
Fabrication of polypyrrole/graphene oxide nanocomposites by liquid/liquid interfacial polymerization and evaluation of their optical, electrical and electrochemical properties
83
Fabrication of polypyrrole–phenylalanine nano-films with NH3 gas sensitivity
84
Fabrication of polypyrrole–phenylalanine nano-films with NH3 gas sensitivity
85
Fabrication of polystyrene hollow pellet with high Z microparticles on inner surface for measurement of temperature and density in ICF plasma
86
Fabrication of polystyrene hollow spheres in W/O/W multiple emulsions
87
Fabrication of polysulfone ultrafiltration membranes of a density gradient cross section with good anti-pressure stability and relatively high water flux Original Research Article
88
Fabrication of polythionine/NPAu/MWNTs modified electrode for simultaneous determination of adenine and guanine in DNA
89
Fabrication of polyurethane and polyurethane based composite fibres by the electrospinning technique for soft tissue engineering of cardiovascular system
90
Fabrication of polyvinyl alcohol-graphene nanosheet nanocomposite loading of omega-3 fatty acids for ceramic engineering
91
Fabrication of polyvinyl chloride ultrafiltration membranes with stable antifouling property by exploring the pore formation and surface modification capabilities of polyvinyl formal
92
Fabrication of polyvinylidene difluoride nano-hybrid dialysis membranes using functionalized multiwall carbon nanotube for polyethylene glycol (hydrophilic additive) retention
93
Fabrication of polyvinylidene fluoride (PVDF) nanofiber membranes by electro-spinning for direct contact membrane distillation
94
Fabrication of pore size controllable polymeric composite membrane using phase change material
95
Fabrication of pore-gradient Al2O3–ZrO2 sintered bodies by fibrous monolithic process
96
Fabrication of porous alumina ceramics from powder mixtures with sol–gel derived nanometer alumina: Effect of mixing method
97
Fabrication of porous anisotropic silicon nitride by using partial sinter-forging technique
98
Fabrication of porous anisotropic silicon nitride by using partial sinter-forging technique
99
Fabrication of porous anisotropic silicon nitride by using partial sinter-forging technique
100
Fabrication of porous Ba(Ti,Sb)O3 ceramics and electrical properties
101
Fabrication of porous Ba(Ti,Sb)O3 ceramics and electrical properties
102
Fabrication of porous BaSnO3 hollow architectures using BaCO3@SnO2 core–shell nanorods as precursors
103
Fabrication of Porous Biologic Hydroxyapatite Scaffold Reinforced with Polymer Coating for Bone Tissue Engineering Candidate
104
Fabrication of porous biopolymer substrates for cell growth by UV laser: The role of pulse duration
105
Fabrication of porous calcium phosphates
106
Fabrication of porous carbon micropillars using a block copolymer as porogen Original Research Article
107
Fabrication of porous carbon monoliths with a graphitic framework Original Research Article
108
Fabrication of porous chitosan films impregnated with silver nanoparticles: A facile approach for superior antibacterial application
109
Fabrication of porous chitosan scaffold in order to improve biocompatibility Original Research Article
110
Fabrication of porous chitosan scaffolds for soft tissue engineering using dense gas CO2
111
Fabrication of porous components for molten carbonate fuel cell
112
Fabrication of porous Co–Ni–P catalysts by electrodeposition and their catalytic characteristics for the generation of hydrogen from an alkaline NaBH4 solution
113
Fabrication of porous copper by unidirectional solidification under hydrogen and its properties
114
Fabrication of porous CuO nanoplate-films by oxidation-assisted dealloying method
115
Fabrication of porous flaky electromagnetic particles by electroless plating of CoNiP on diatomite
116
Fabrication of porous gelatin scaffolds for tissue engineering
117
Fabrication of Porous Hydroxyapatite for Bone Graft Substitutes via Gas Technique
118
Fabrication of porous hydroxyapatite scaffold via polyethylene glycol-polyvinyl alcohol hydrogel state
119
Fabrication of Porous Hydroxyapatite-Gelatin Composite Scaffolds for Bone Tissue Engineering
120
Fabrication of porous magnesium spinel with directional pores by unidirectional solidification
121
Fabrication of porous microspheres and network arrays of Zn–Al hydrotalcite-like compounds on Al substrate via facile hydrothermal method
122
Fabrication of porous nanostructured TiO2 particles by an aerosol templating method
123
Fabrication of porous nanostructured TiO2 particles by an aerosol templating method
124
Fabrication of porous Ni3S2/Ni nanostructured electrode and its application in lithium ion battery
125
Fabrication of porous NiTi shape memory alloy for hard tissue implants by combustion synthesis
126
Fabrication of porous NiTi shape memory alloy for hard tissue implants by combustion synthesis
127
Fabrication of porous NiTi-shape memory alloy objects by partially hydrided titanium powder for biomedical applications
128
Fabrication of porous PCL/elastin composite scaffolds for tissue engineering applications
129
Fabrication of porous platelike LiFePO4/C cathode materials via hydrothermal process
130
Fabrication of porous polymeric nanocomposite membranes with enhanced anti-fouling properties: Effect of casting composition
131
Fabrication of porous polysaccharide-based scaffolds using a combined freeze-drying/cross-linking process
132
Fabrication of Porous Segments Using Ti-6Al-4V Chips for Orthopaedic Applications
133
Fabrication of porous SiC ceramics having pores shaped with Si grain templates
134
Fabrication of porous SiCy (core)/C (shell) fibres using a hybrid precursor of polycarbosilane and pitch
135
Fabrication of porous silicon carbide ceramics with high porosity and high strength
136
Fabrication of porous SiO2/C composite from rice husks
137
Fabrication of porous spinel (MgAl2O4) from porous alumina using a template method
138
Fabrication of porous TiO2 nanofiber and its photocatalytic activity
139
Fabrication of porous titanium dioxide fibers and their photocatalytic activity for hydrogen evolution
140
Fabrication of porous titanium scaffold with controlled porous structure and net-shape using magnesium as spacer
141
Fabrication of porous titanium scaffolds by stack sintering of microporous titanium spheres produced with centrifugal granulation technology
142
Fabrication of porous ultra-short single-walled carbon nanotube nanocomposite scaffolds for bone tissue engineering
143
Fabrication of Porous ZnO Thin Films via Ammonium Hydroxide: Effects of Etching Time and Oxidizer on Surface Morphology and Surface Roughness
144
Fabrication of porous ZrO2 hollow sphere and its adsorption performance to Congo red in water
145
Fabrication of porphyrin–titanium oxide–fullerene assemblies on an ITO electrode and their photocurrent responses
146
Fabrication of Potassium Ion-selective Membrane Electrode as Immobilized Liquid based on Dibenzo-18- Crown-6 (DB18C6) as Ionophore
147
FABRICATION OF POTENTIAL MACROMOLECULAR PRODRUGS OF ASPIRIN AND DICLOFENAC WITH DEXTRAN
148
Fabrication of PP-g-PEGMA-g-heparin and its hemocompatibility: From protein adsorption to anticoagulant tendency
149
Fabrication of pressureless sintered dense β-SiAlON via a reaction-bonding route with ZrO2 addition
150
Fabrication of printed memory device having zinc-oxide active nano-layer and investigation of resistive switching
151
Fabrication of protective over layer for enhanced thermal stability of zinc oxide based TCO films
152
Fabrication of protective tantalum carbide coatings on carbon fibers using a molten salt method
153
Fabrication of protein G LB film for immunoglobulin G immobilization
154
Fabrication of protein-anchoring surface by modification of Sio2 with liposomal bilayer
155
Fabrication of protein-resistant blend based on PVDF-HFP and amphiphilic brush copolymer made from PMMA and PEGMA
156
Fabrication of protein-stabilized nanoemulsions using a combined homogenization and amphiphilic solvent dissolution/evaporation approach
157
Fabrication of protonic conductors with nano-structured surface by porous alumina membrane mask
158
Fabrication of prototype ICRF antenna for KSTAR and first RF test
159
Fabrication of prototype imaging arrays for SCUBA-2
160
Fabrication of prototype imaging arrays for SCUBA-2
161
Fabrication of Prussian Blue modified ultramicroelectrode for GOD imaging using scanning electrochemical microscopy
162
Fabrication of pseudo-ceramide-based lipid microparticles for recovery of skin barrier function
163
Fabrication of pseudo-spin-valves and 100 nm sized periodic elements for magnetic memory application
164
Fabrication of pseudo-spin-valves and 100 nm sized periodic elements for magnetic memory application
165
Fabrication of PSZ–Ti composites by spark plasma sintering and their mechanical properties
166
Fabrication of Pt nanoparticles decorated PPy–MWNTs composites and their electrocatalytic activity for methanol oxidation
167
Fabrication of Pt nanoparticles on ethylene diamine functionalized graphene for formic acid electrooxidation
168
Fabrication of Pt/polypyrrole hybrid hollow microspheres and their application in electrochemical biosensing towards hydrogen peroxide
169
Fabrication of Pt–Cu/RGO hybrids and their electrochemical performance for the oxidation of methanol and formic acid in acid media Original Research Article
170
Fabrication of p-type Li-doped ZnO films by pulsed laser deposition
171
Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions
172
Fabrication of p-type SnO2 films via pulsed laser deposition method by using Sb as dopant
173
Fabrication of p-type ZnMgO codoped with Al and N using dc reactive magnetron sputtering
174
Fabrication of p-type ZnMgO films via pulsed laser deposition method by using Li as dopant source
175
Fabrication of p-type ZnO nanowires based heterojunction diode
176
Fabrication of pulsed-laser deposited V2O5 thin films for electrochromic devices
177
Fabrication of pulsed-laser deposited V–W–Nd mixed-oxide films
178
Fabrication of pure Al/Mg–Li alloy clad plate and its mechanical properties
179
Fabrication of pure SiC ceramic foams using SiO2 as a foaming agent via high-temperature recrystallization
180
Fabrication of pure silica films for planar optical waveguides using colloidal suspensions
181
Fabrication of pure starch fibers by electrospinning
182
Fabrication of PVA/graphene oxide/TiO2 composite nanofibers through electrospinning and interface sol–gel reaction: Effect of graphene oxide on PVA nanofibers and growth of TiO2
183
Fabrication of PVDF hollow fiber membranes: Effects of low-concentration Pluronic and spinning conditions
184
Fabrication of PVDF/PVA microtubules by coaxial electrospinning
185
Fabrication of quantum dot transistors incorporating a single self-assembled quantum dot
186
Fabrication of quantum dot–lectin conjugates as novel fluorescent probes for microscopic and flow cytometric identification of leukemia cells from normal lymphocytes
187
Fabrication of quantum well microcantilever photon detectors
188
Fabrication of quantum well microcantilever photon detectors
189
Fabrication of quantum well microcantilever photon detectors
190
Fabrication of quantum well photonic integrated circuits using laser processing
191
Fabrication of quercetin and curcumin bionanovesicles for the prevention and rapid regeneration of full-thickness skin defects on mice
192
Fabrication of quercetin nanoparticles by anti-solvent precipitation method for enhanced dissolution
193
Fabrication of radar absorbing structure (RAS) using GFR-nano composite and spring-back compensation of hybrid composite RAS shells
194
Fabrication of reaction-bonded SiC ceramics by slip casting of SiC/C suspension
195
Fabrication of reagentless glucose biosensors: A comparison of mono-enzyme GOD and bienzyme GOD–HRP systems
196
Fabrication of reduction-degradable micelle based on disulfide-linked graft copolymer-camptothecin conjugate for enhancing solubility and stability of camptothecin
197
Fabrication of reflective holographic gratings with polyurethane acrylate (PUA)
198
Fabrication of refractory metal based metallic glasses
199
Fabrication of regioregular poly(3-hexylthiophene) field-effect transistors by dip-coating
200
Fabrication of resonant-tunneling diodes by Sb surfactant modified growth of Si films on CaF/sub 2//Si
201
Fabrication of resonant-tunneling diodes by Sb surfactant modified growth of Si films on CaF/sub 2//Si
202
Fabrication of reusable sensor for detection of Cu^2+ in an aqueous solution using a self-assembled monolayer with surface plasmon resonance spectroscopy
203
Fabrication of reverse osmosis membrane via low temperature plasma polymerization
204
Fabrication of rigid media tube filter bound with aluminum borate using Al2O3–B2O3–MgO frit for filtration of molten aluminum
205
Fabrication of Rosuvastatin-Incorporated Polycaprolactone -Gelatin Scaffold for Bone Repair: A Preliminary In Vitro Study
206
Fabrication of Ru(bpy)32+-titanate nanotube nanocomposite and its application as sensitive solid-state electrochemiluminescence sensor material Original Research Article
207
Fabrication of Saddle-Shaped Surfaces by Flame Forming Process
208
Fabrication of Sb2O3 nanobelt bundles via a facile ultrasound-assisted room temperature liquid phase chemical route and evaluation of their optical properties
209
Fabrication of Sb-doped p-type ZnO thin films by pulsed laser deposition
210
Fabrication of scandia-stabilized zirconia electrolyte with a porous and dense composite layer for solid oxide fuel cells
211
Fabrication of Schottky barrier diodes using H2O2-treated non-polar ZnO image substrates
212
Fabrication of SDBS intercalated-reduced graphene oxide/polypyrrole nanocomposites for supercapacitors
213
Fabrication of SDBS intercalated-reduced graphene oxide/polypyrrole nanocomposites for supercapacitors
214
Fabrication of seamless calandria tubes by cold pilgering route using 3-pass and 2-pass schedules
215
Fabrication of selenium-deposited and chitosan-coated titania nanotubes with anticancer and antibacterial properties
216
Fabrication of Self-Apodized Short-Length Fiber Bragg Gratings
217
Fabrication of self-assembled oligophenylethynylenethiol monolayer for electrochemical glucose biosensor
218
Fabrication of self-assembled oligophenylethynylenethiol monolayer for electrochemical glucose biosensor
219
Fabrication of self-assembled ultrathin photochromic films containing mixed-addenda polyoxometalates H5[PMo10V2O40] and 1,10-decanediamine
220
Fabrication of self-binding noble metal/flexible graphene composite paper Original Research Article
221
Fabrication of self-defined gated field emission devices on silicon substrates using PECVD-grown carbon nano-tubes Original Research Article
222
Fabrication of self-encapsulated nickel microchannels and nickel nanowalls by reactive ion etching
223
Fabrication of self-lubricating coating on aluminum and its frictional behaviour
224
Fabrication of self-masked InP nanopillars by electron cyclotron resonance ion etching
225
Fabrication of self-ordered nanohole arrays on Si by localized anodization and subsequent chemical etching
226
Fabrication of self-organised Ge dots using self-patterned SiGe template layer
227
Fabrication of self-organised Ge dots using self-patterned SiGe template layer
228
Fabrication of semiconducting graphene oxide/polyaniline composite particles and their electrorheological response under an applied electric field Original Research Article
229
Fabrication of semiconducting polyaniline/nano-silica nanocomposite particles and their enhanced electrorheological and dielectric characteristics
230
Fabrication of semi-conductive ceramics by combination of gelcasting and reduction sintering
231
Fabrication of SERS substrate using nanoporous anodic alumina template decorated by silver nanoparticles
232
Fabrication of seven cells in single tubular solid oxide fuel cell using multi-pass extrusion process
233
Fabrication of shape controlled Fe3O4 nanostructure
234
Fabrication of shape memory alloys using the plasma skull push–pull process
235
Fabrication of shape-controlled hematite particles and growth of gold nanoshells
236
Fabrication of shish–kebab structured poly(ε-caprolactone) electrospun nanofibers that mimic collagen fibrils: Effect of solvents and matrigel functionalization
237
Fabrication of short and straight carbon nanotubes by chemical vapor deposition
238
Fabrication of short C fiber-reinforced SiC composites by spark plasma sintering
239
Fabrication of short carbon fiber preforms coated with pyrocarbon/SiC for liquid metal infiltration
240
Fabrication of short carbon fibre reinforced SiC multilayer composites by tape casting
241
Fabrication of short-fiber-reinforced SiC composites by polycarbosilane infiltration
242
Fabrication of Si nanocrystals in an amorphous SiC matrix by magnetron sputtering
243
Fabrication of Si/SiGe quantum point contacts by electron-beam lithography and shallow wet-chemical etching
244
Fabrication of Si3N4 reticulated porous ceramics reinforced by needle-like β-Si3N4
245
Fabrication of Si3N4-based composite containing needle-like TiN synthesized using NH3 nitridation of TiO2 nanofiber
246
Fabrication of Si3N4–SiBC composite ceramic and its excellent electromagnetic properties
247
Fabrication of Si3N4–SiC nano-composite ceramics through temperature-induced gelation and liquid phase sintering
248
Fabrication of Si–Ag “wire-cap” nanostructures for metal-enhanced fluorescence
249
Fabrication of SiC by carbothermal-reduction reactions of diatomaceous earth
250
Fabrication of SiC fiber reinforced SiC composite by chemical vapor infiltration for excellent mechanical properties Original Research Article
251
Fabrication of SiC lateral super junction diodes with multiple stacking p- and n-layers
252
Fabrication of SiC/SiC composites by means of in situ crystallization of SiC fibers
253
Fabrication of SiCf/SiC composites by SITE-P process
254
Fabrication of SiCN–Sc2Si2O7 coatings on C/SiC composites at low temperatures
255
Fabrication of SiCw reinforced ZrB2-based ceramics
256
Fabrication of SiGe bulk crystals with uniform composition as substrates for Si-based heterostructures
257
Fabrication of SiGe rings and holes on Si(0 0 1) by flash annealing
258
Fabrication of SiGe-on-insulator by rapid thermal annealing of Ge on Si-on-insulator substrate
259
Fabrication of silica coated Al2O3 nanoparticles via a fast and facile route utilizing microwave irradiation
260
Fabrication of silica core–conductive polymer polypyrrole shell composite particles and polypyrrole capsule on monodispersed silica templates
261
Fabrication of silica monolithic columns with ordered meso/macropore structure
262
Fabrication of silica nano wires on the internal perimeter of narrow bore fused silicia tubing by non-isothermal etching
263
Fabrication of silica nanoparticles and hollow spheres using ionic liquid microemulsion droplets as templates
264
Fabrication of silica nanoparticles on the surface of functionalized multi-walled carbon nanotubes Original Research Article
265
Fabrication of silica-on-titania and titania-on-silica nanoparticle assemblies
266
Fabrication of silicide materials and their composites by reaction sintering
267
Fabrication of silicide materials and their composites by reaction sintering
268
Fabrication of silicon bolometers with bulk micromachining technology
269
Fabrication of silicon bolometers with bulk micromachining technology
270
Fabrication of silicon carbide fiber-reinforced silicon carbide composite by hot-pressing
271
Fabrication of silicon carbide reinforced aluminum matrix nanocomposites and characterization of its mechanical properties using non-destructive technique
272
Fabrication of silicon carbide whiskers and whisker-containing composite coatings without using a metallic catalyst
273
Fabrication of silicon nanopillars using self-organized gold–chromium mask
274
Fabrication of silicon nanopillars using self-organized gold–chromium mask
275
Fabrication of silicon nanowire arrays based solar cell with improved performance
276
Fabrication of silicon nanowire networks for biological sensing
277
Fabrication of silicon nanowire structures based on proximity effects of electron-beam lithography
278
Fabrication of silicon nitride fiber–PMMA composite through free radical polymerization in batch
279
Fabrication of silicon on lattice-engineered substrate (SOLES) as a platform for monolithic integration of CMOS and optoelectronic devices
280
Fabrication of silicon oxide microneedles from macroporous silicon
281
Fabrication of Silicon Oxide Nanodot Arrays by Scanning Probe Lithography
282
Fabrication of silicon PIN diode as proton energy detector
283
Fabrication of silicon pyramid/nanowire binary structure with superhydrophobicity
284
Fabrication of silicon solar cells with rear pinhole contacts
285
Fabrication of silicone oil microcapsules with silica shell by miniemulsion method
286
Fabrication of silicone oral splints for severe burn microstomia in children
287
Fabrication of silk fibroin coated ZnSe : Mn2+ quantum dots under -radiation and their magnetic properties
288
Fabrication of Silk Scaffold Containing Simvastatin-Loaded Silk Fibroin Nanoparticles for Regenerating Bone Defects
289
Fabrication of silk sericin/alginate microparticles by electrohydrodynamic spraying technique for the controlled release of silk sericin
290
Fabrication of Silver doped Buckypaper and Investigation of its Properties
291
Fabrication of silver hollow microspheres by sodium hydroxide in glycerol solution
292
Fabrication of silver nanocomposites by thiol-end capped ABC triblock copolymer and investigation of their Inhibitory effect against bacteria and yeast in vitro
293
Fabrication of silver nanoparticles deposited on boehmite sol for surface enhanced Raman scattering
294
Fabrication of silver nanoparticles in poly (N-isopropylacrylamide-co-allylacetic acid) microgels for catalytic reduction of nitroarenes
295
Fabrication of silver nanoparticles ring templated by plasmid DNA
296
Fabrication of silver nanoparticles/polyaniline composite thin films using Layer-by-Layer self-assembly technique for ammonia sensing
297
Fabrication of silver nanoparticles–polypyrrole composite modified electrode for electrocatalytic oxidation of hydrazine
298
Fabrication of silver nanoparticles–polypyrrole composite modified electrode for electrocatalytic oxidation of hydrazine
299
Fabrication of silver nanotubes using functionalized silica rod as templates
300
Fabrication of Silver Oxide and Nickel Oxide Nanoparticles by Green Synthesis Method Using Malva Sylvestris Plant Extract
301
Fabrication of silver-coated silicon nanowire arrays for surface-enhanced Raman scattering by galvanic displacement processes
302
Fabrication of simulated plate fuel elements: Defining role of out-of-plane residual shear stress
303
Fabrication of single crystalline Bi-2212 whiskers from Ga added Bi2Sr2Ca2Cu3Ox composition and their thermal, structural, electrical and magnetic properties
304
Fabrication of Single Crystalline Neodymium Oxide Nanowires under Mild Conditions
305
Fabrication of Single Layer SiO2 and Si3N4 as Antireflection Coating on Silicon Solar Cell Using Silvaco Software
306
Fabrication of single optical centres in diamond—a review
307
Fabrication of single phase CuO nanowires and effect of electric field on their growth and investigation of their photocatalytic properties
308
Fabrication of single-crystalline insulator/Si/insulator double-barrier nanostructure using cooperative vapor–solid-phase epitaxy
309
Fabrication of single-phase superparamagnetic iron oxide nanoparticles from factory waste soil
310
Fabrication of single-wall carbon nanotubes within the channels of a mesoporous material by catalyst-supported chemical vapor deposition Original Research Article
311
Fabrication of single-walled carbon nanotube Schottky diode with gold contacts modified by asymmetric thiolate molecules Original Research Article
312
Fabrication of single-walled carbon nanotube three-dimensional networks inside the pores of a porous silicon structure Original Research Article
313
Fabrication of single-walled carbon nanotubes dotted with Au nanocrystals: Potential DNA delivery nanocarriers Original Research Article
314
Fabrication of single-walled carbon nanotubes from multi-walled carbon nanotubes and carbon fibers
315
Fabrication of sintered steel wire mesh and its compressive properties
316
Fabrication of SiNWs/PEDOT:PSS Heterojunction Solar Cells
317
Fabrication of SiO2 nano-dots by block copolymer lithography and liquid phase deposition
318
Fabrication of SiO2@Ag@SiO2 core–shell microspheres and thermal stability investigation
319
Fabrication of SiO2-doped Ba0.85Sr0.15TiO3 glass–ceramic films and the measurement of their pyroelectric coefficient
320
Fabrication of size controllable YVO4 nanoparticles via microemulsion-mediated synthetic process
321
Fabrication of size-controllable hollow nano-spheres based on polyimides composites
322
Fabrication of size-tunable antireflective nanopillar array using hybrid nano-patterning lithography
323
Fabrication of size-tunable, periodic Si nanohole arrays by plasma modified nanosphere lithography and anisotropic wet etching
324
Fabrication of slippery liquid-infused porous surface based on carbon fiber with enhanced corrosion inhibition property
325
Fabrication of Sm- and Mn-doped lead titanate ceramic powder and ceramics by sol–gel methods
326
Fabrication of Sm0.5Sr0.5CoO3−δ−Sm0.1Ce0.9O2−δ cathodes for solid oxide fuel cells using combustion CVD
327
Fabrication of Sm2+-doped macroporous aluminosilicate glasses with high alumina content
328
Fabrication of small l-threonine capped nickel nanoparticles and their catalytic application Original Research Article
329
Fabrication of small mock-ups reflecting the design features of the ITER semi-prototype
330
Fabrication of small models of large cylinders with extensive welding for buckling experiments
331
Fabrication of smart COC chips: Advantages of N-vinylpyrrolidone (NVP) monomer over other hydrophilic monomers
332
Fabrication of smooth facets of InP by selective sidewall epitaxy using CBE
333
Fabrication of smooth β-SiC surfaces by reactive ion etching using a graphite electrode
334
Fabrication of smooth β-SiC surfaces by reactive ion etching using a graphite electrode
335
Fabrication of Sn/SnO2 composite powder for anode of lithium ion battery by aerosol flame deposition
336
Fabrication of Sn/SnO2 composite powder for anode of lithium ion battery by aerosol flame deposition
337
Fabrication of Sn4+ doped Ba(Mg1/3Ta2/3)O3 transparent ceramics by a solid state reaction method
338
Fabrication of Sn-doped zinc phosphate glass using a platinum crucible
339
Fabrication of SnO2 and SiO2 nanoparticle-embedded carbon nanofiber composites via co-electrospinning
340
Fabrication of SnO2–ZnO nanocomposite sensor for selective sensing of trimethylamine and the freshness of fishes
341
Fabrication of Sn–Se compounds on a gold electrode by electrochemical atomic layer epitaxy
342
Fabrication of soft gold microelectrode arrays as probes for scanning electrochemical microscopy
343
Fabrication of Soft Magnetic Fe-based Nanoalloy
344
Fabrication of SOI structure with AlN film as buried insulator by Ion-Cut process
345
Fabrication of solar light induced Fe-TiO2 immobilized on glass-fiber and application for phenol photocatalytic degradation
346
Fabrication of solid aluminum electrolytic capacitors utilizing conductive polyaniline solutions
347
Fabrication of solid lipid microcapsules containing ascorbic acid using a microfluidic technique
348
Fabrication of solid oxide fuel cell based on doped ceria electrolyte by one-step sintering at 800 °C
349
Fabrication of solid oxide fuel cell supported on specially performed ferrite-based perovskite cathode
350
Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition
351
Fabrication of solid-state fuel cell based on DNA film
352
Fabrication of solution-processed amorphous indium zinc oxide thin-film transistors at low temperatures using deep-UV irradiation under wet conditions
353
Fabrication of sonicated chitosan nanofiber mat with enlarged porosity for use as hemostatic materials
354
Fabrication of specimens of metamorphic magnetite crystals for field ion microscopy and atom probe microanalysis
355
Fabrication of specimens of metamorphic magnetite crystals for field ion microscopy and atom probe microanalysis
356
Fabrication of specimens of metamorphic magnetite crystals for field ion microscopy and atom probe microanalysis
357
Fabrication of spherically hierarchical structures with ZnO nanowires synthesized on Au and SiO2 microspheres
358
Fabrication of spintronic material Cd1−x Mnx Te using stack deposition
359
Fabrication of Spiral Stent with Superelastic/ Shape Memory Nitinol Alloy for Femoral Vessel
360
Fabrication of spray-formed hypereutectic Al–25Si alloy and its deformation behavior
361
Fabrication of spray-printed organic non-volatile memory devices for low cost electronic applications
362
Fabrication of Sr- and Co-doped lanthanum chromite interconnectors for SOFC
363
Fabrication of SrMO3 (M = Ce and Zr) thin films and SrCeO3SrZrO3 superlattices by laser ablation
364
Fabrication of SrRuO3 powders and thin films by metalorganic decomposition
365
Fabrication of stable Al2O3 slurries and dense green bodies using soft-energy milling process
366
Fabrication of stable low voltage organic bistable memory device
367
Fabrication of stable metal nanowire showing conductance quantization in solution
368
Fabrication of stable network-like gold nanostructures in solution and their assessment as efficient NIR-SERS platforms for organic pollutants detection
369
Fabrication of stable polydiacetylene vesicles with 2,4-akyl-diacetylenic acid
370
Fabrication of stable, transparent and superhydrophobic nanocomposite films with polystyrene functionalized carbon nanotubes
371
Fabrication of stainless steel and aluminum fibers by PDME method
372
Fabrication of stainless steel bipolar plates for fuel cells using dynamic loads for the stamping process and performance evaluation of a single cell
373
Fabrication of starch-based microparticles by an emulsification-crosslinking method Original Research Article
374
Fabrication of starch-based nanospheres to stabilize pickering emulsion
375
Fabrication of star-shaped, thermo-sensitive poly(N-isopropylacrylamide)–cholic acid–poly(ɛ-caprolactone) copolymers and their self-assembled micelles as drug carriers
376
Fabrication of steel matrix composites locally reinforced with different ratios of TiC/TiB2 particulates using SHS reactions of Ni–Ti–B4C and Ni–Ti–B4C–C systems during casting
377
Fabrication of strain-balanced Si0.73Ge0.27/Si-distributed Bragg reflectors on Si substrates for optical device applications
378
Fabrication of structure-controlled hydroxyapatite/zirconia composite
379
Fabrication of structured vanadium catalyst for SO2 conversion Original Research Article
380
Fabrication of structures with tunable morphologies and sizes by soft molding
381
Fabrication of SU-8 based microchip electrophoresis with integrated electrochemical detection for neurotransmitters
382
Fabrication of sub-10 nm planar nanotips for transport experiments of biomolecules
383
Fabrication of sub-100 nm IDT SAW devices on insulating, semiconducting and conductive substrates
384
Fabrication of sub-micrometric metallic hollow-core structures by laser interference lithography
385
Fabrication of submicron alumina ceramics by pulse electric current sintering using M2+ (M = Mg, Ca, Ni)-doped alumina nanopowders
386
Fabrication of submicron Cu2O hollow spheres in an O/W/O multiple emulsions
387
Fabrication of submicron magnetic oxide antidot arrays by combining nanosphere lithography with sputtering technology
388
Fabrication of submicron-scale manganese–nickel tips for spin-polarized STM studies
389
Fabrication of substrates with various wettabilities for DNA molecular combing
390
Fabrication of subwavelength structure for improvement in light-extraction efficiency of light-emitting devices using a self-assembled pattern of block copolymer
391
Fabrication of sub-wavelength surface ripples and in-volume nanostructures by fs-laser induced selective etching
392
Fabrication of succinic acid-γ-Fe2O3 nano core–shells
393
Fabrication of Sulfapyridine Electrochemical Sensor Amplified with CuO/SWCNTs as High Performance Electroanalytical Tool in Real Sample Analysis
394
Fabrication of sulfonated poly(ether ether ketone ketone) membranes with high proton conductivity
395
Fabrication of superconducting transition edge sensor based on Mo and Au bilayers
396
Fabrication of superconducting transition edge sensor based on Mo and Au bilayers
397
Fabrication of superhydrophilic and antireflective silica coatings on poly(methyl methacrylate) substrates
398
Fabrication of superhydrophilic Cu2O and CuO membranes
399
Fabrication of superhydrophilic membrane filters using spherical glass particles obtained by ultrasonic spray pyrolysis
400
Fabrication of superhydrophobic aluminium alloy surface with excellent corrosion resistance by a facile and environment-friendly method
401
Fabrication of superhydrophobic and conductive surface based on carbon nanotubes
402
Fabrication of superhydrophobic and oleophobic sol–gel nanocomposite coating
403
Fabrication of superhydrophobic and superoleophilic textiles for oil–water separation
404
Fabrication of superhydrophobic binary nanoparticles/PMMA composite coating with reversible switching of adhesion and anticorrosive property
405
Fabrication of superhydrophobic coating via a facile and versatile method based on nanoparticle aggregates
406
Fabrication of superhydrophobic copper surface with ultra-low water roll angle
407
Fabrication of superhydrophobic cotton fabrics by silica hydrosol and hydrophobization
408
Fabrication of superhydrophobic cotton textiles for water–oil separation based on drop-coating route
409
Fabrication of superhydrophobic Cu surfaces with tunable regular micro and random nano-scale structures by hybrid laser texture and chemical etching
410
Fabrication of super-hydrophobic film from PMMA with intrinsic water contact angle below 90°
411
Fabrication of superhydrophobic hybrids from multiwalled carbon nanotubes and poly(vinylidene fluoride)
412
Fabrication of superhydrophobic magnesium alloy through the oxidation of hydrogen peroxide
413
Fabrication of superhydrophobic polyaniline films with rapidly switchable wettability
414
Fabrication of superhydrophobic polyurethane/MoS2 nanocomposite coatings with wear-resistance
415
Fabrication of superhydrophobic polyurethane/organoclay nano-structured composites from cyclomethicone-in-water emulsions
416
Fabrication of superhydrophobic silica-based surfaces with high transmittance by using tetraethoxysilane precursor and different polymeric species
417
Fabrication of superhydrophobic spherical-like α-FeOOH films on the wood surface by a hydrothermal method
418
Fabrication of super-hydrophobic surface on copper surface by polymer plating
419
Fabrication of superhydrophobic surface with hierarchical multi-scale structure on copper foil
420
Fabrication of superhydrophobic surfaces based on ZnO–PDMS nanocomposite coatings and study of its wetting behaviour
421
Fabrication of super-hydrophobic surfaces for enhanced stone protection
422
Fabrication of superhydrophobic surfaces on aluminum
423
Fabrication of super-hydrophobic surfaces on aluminum alloy substrates
424
Fabrication of superhydrophobic surfaces on engineering material surfaces with stearic acid
425
Fabrication of superhydrophobic surfaces on zinc substrates
426
Fabrication of superhydrophobic surfaces on zinc substrates and their application as effective corrosion barriers
427
Fabrication of superhydrophobic surfaces via CaCO3 mineralization mediated by poly(glutamic acid)
428
Fabrication of superhydrophobic surfaces with controlled topography and chemistry
429
Fabrication of superhydrophobic surfaces with non-aligned alkyl-modified multi-wall carbon nanotubes Original Research Article
430
Fabrication of superhydrophobic surfaces with perfluorooctanoic acid modified TiO2/polystyrene nanocomposites coating
431
Fabrication of superhydrophobic surfaces with poly(furfuryl alcohol)/multi-walled carbon nanotubes composites
432
Fabrication of superhydrophobic TiO2 surface with cactus-like structure by a facile hydrothermal approach
433
Fabrication of superhydrophobic vanadium pentoxide nanowires surface by chemical modification
434
Fabrication of superhydrophobic wood surface by a sol–gel process
435
Fabrication of superhydrophobic wood surfaces via a solution-immersion process
436
Fabrication of superhydrophobic ZnO/Zn surface with nanowires and nanobelts structures using novel plasma assisted thermal vapor deposition
437
Fabrication of superhydrophobic/superoleophilic cotton for application in the field of water/oil separation
438
Fabrication of superhydrophobicity on cotton fabric by sol–gel
439
Fabrication of super-macroporous nanocomposites by deposition of carbon nanotubes onto polymer cryogels
440
Fabrication of superporous agarose beads for protein adsorption: Effect of CaCO3 granules content
441
Fabrication of super-repellent cotton textiles with rapid reversible wettability switching of diverse liquids
442
Fabrication of supported Ca-doped lanthanum niobate electrolyte layer and NiO containing anode functional layer by electrophoretic deposition
443
Fabrication of Surface Bumps on a Capsule to Simulate Fill Tube Mass Defects
444
Fabrication of surface crystallized glasses with α-Zn3B2O6 and their optical property
445
Fabrication of surface self-lubricating composites of aluminum alloy
446
Fabrication of surface-confined ferrocene-appended cyclodextrins on gold electrode
447
Fabrication of surface-enhanced Raman scattering sensors to detect antibiotic residues in muscle foods using gold nanoparticles
448
Fabrication of surface-patterned and free-standing ZnO nanobowls
449
Fabrication of suspended carbon microstructures by e-beam writer and pyrolysis Original Research Article
450
Fabrication of switchable protein resistant and adhesive multilayer membranes
451
Fabrication of Ta/Ta-oxide/Ta trilayer Josephson junctions
452
Fabrication of Ta/Ta-oxide/Ta trilayer Josephson junctions
453
Fabrication of Ta/Ta-oxide/Ta trilayer Josephson junctions
454
Fabrication of Tamarindus indica seeds extract loaded-cream for photo-aged skin: Visioscan® studies
455
Fabrication of temperature-responsive ZrO2 tubular membranes, grafted with poly (N-isopropylacrylamide) brush chains, for protein removal and easy cleaning
456
Fabrication of ternary CNT/PPy/KxMnO2 composite nanowires for electrocatalytic applications
457
Fabrication of textured Ag substrate for YBCO coated conductor
458
Fabrication of textured alumina by orienting template particles during electrophoretic deposition
459
Fabrication of textured bismuth titanate by templated grain growth using aqueous tape casting
460
Fabrication of textured ferroelectric ceramics by magnetic alignment via gelcasting
461
Fabrication of textured KNNT ceramics by reactive template grain growth using NN templates
462
Fabrication of textured SnO2:F thin films by spray pyrolysis
463
Fabrication of textured Sr2Na0.9K0.1Nb5O15 ceramics: Anisotropy in structures and electrical properties
464
Fabrication of the aligned and patterned carbon nanotube field emitters using the anodic aluminum oxide nano-template on a Si wafer
465
Fabrication of the carbon paper by wet-laying of ozone-treated carbon fibers with hydrophilic functional groups Original Research Article
466
Fabrication of the CN co-doped rod-like TiO2 photocatalyst with visible-light responsive photocatalytic activity
467
Fabrication of the Cu2O/polyvinyl pyrrolidone-graphene modified glassy carbon-rotating disk electrode and its application for sensitive detection of herbicide paraquat
468
Fabrication of the Cu-Zn Multilayer and Cu-Zn Alloy by Accumulative Roll Bonding (ARB) with an Emphasis on the Wear Behavior
469
Fabrication of the Cu-Zn Multilayer and Cu-Zn Alloy by Accumulative Roll Bonding (ARB) with an Emphasis on the Wear Behavior
470
Fabrication of the HgBa2Ca2Cu3O8+x phase by the ampoule method
471
Fabrication of the hollow SnO2 nanoparticles contained spheres as extreme ultraviolet (EUV) target
472
Fabrication of the hydrogen resistive ferroelectric film of the (Pb0.72La0.28)Ti0.93O3/Pb(Zr0.52Ti0.48)O3/(Pb0.72La0.28)Ti0.93O3 heterostructure by a pulsed laser deposition method
473
Fabrication of the hydrogen-evolving photocatalyst with mesoporous structure
474
Fabrication of the KSTAR vacuum vessel and ports
475
Fabrication of the large area thin-film solid oxide fuel cells
476
Fabrication of the nanogapped gold nanoparticles film for direct electrical detection of DNA and EcoRI endonuclease
477
Fabrication of the nanometer Al2O3/Cu composite by internal oxidation
478
Fabrication of the new structure high toughness PP/HA-PP sandwich nano-composites by rolling process
479
Fabrication of the ordered FeS2 (pyrite) nanowire arrays in anodic aluminum oxide
480
Fabrication of the Ordered Nanocells of Anodic Aluminum Oxide and the Generation of Zn-Mn Ferrite Phase within Them
481
Fabrication of the periodic nanopillar arrays by heat-induced deformation of 2D polymer colloidal monolayer
482
Fabrication of the planar coils for WENDELSTEIN 7-X
483
Fabrication of the SCUBA-2 detector arrays
484
Fabrication of the SCUBA-2 detector arrays
485
Fabrication of the silver structure through two-photon excitation by femtosecond laser
486
Fabrication of the similar porous alumina silicon template for soft UV nanoimprint lithography
487
Fabrication of the stable adduct CdS/CTAB/Clay with sandwich-like nanostructures
488
Fabrication of the superconducting coils for Wendelstein 7-X
489
Fabrication of the superhydrophobic surface on aluminum alloy by anodizing and polymeric coating
490
Fabrication of the supersaturated solid solution of carbon in copper by mechanical alloying
491
Fabrication of the ultrafine-grained ferrite with good resistance to grain growth and evaluation of its tensile properties
492
Fabrication of the uniform CdTe quantum dot array on GaAs substrate utilizing nanoporous alumina masks
493
Fabrication of the uniform CdTe quantum dot array on GaAs substrate utilizing nanoporous alumina masks
494
Fabrication of the wing and vertical target dummy armour prototypes of the ITER divertor
495
Fabrication of the ZnO thin films using wet-chemical etching processes on application for organic light emitting diode (OLED) devices
496
Fabrication of thermal barrier coatings onto polyimide matrix composites via air plasma spray process
497
Fabrication of thermally conductive composite with surface modified boron nitride by epoxy wetting method
498
Fabrication of thermochromic composite using monodispersed VO2 coated SiO2 nanoparticles prepared by modified chemical solution deposition
499
Fabrication of thermoelectric gas sensors on micro-hotplates
500
Fabrication of thermoplastic ductile films of chitin butyrate/poly(ɛ-caprolactone) blends and their cytocompatibility
501
Fabrication of thermoplastic polyester elastomer/layered zinc hydroxide nitrate nanocomposites with enhanced thermal, mechanical and combustion properties
502
Fabrication of thermo-responsive hydrogels from star-shaped copolymer with a biocompatible β-cyclodextrin core
503
Fabrication of thermo-responsive nano-valve by grafting-to in melt of poly(N-isopropylacrylamide) onto nanoporous silicon nitride membranes
504
Fabrication of thick W coatings by atmospheric plasma spraying and their transient high heat loading performance
505
Fabrication of thin and dense nano-crystalline membranes on porous substrates
506
Fabrication of thin electrolytes for second-generation solid oxide fuel cells
507
Fabrication of thin film composite poly(amide)-carbon-nanotube supported membranes for enhanced performance in osmotically driven desalination systems
508
Fabrication of thin film electrodes for all solid state rechargeable lithium batteries
509
Fabrication of thin film nanocrystalline silicon solar cell with low light-induced degradation
510
Fabrication of thin film nanocrystalline TiO2 solar cells using ruthenium complexes with carboxyl and sulfonyl groups
511
Fabrication of thin film silicon solar cells on plastic substrate by very high frequency PECVD
512
Fabrication of thin film TiO2 nanotube arrays on Co–28Cr–6Mo alloy by anodization
513
Fabrication of thin foils of binary Ni–Al γ/γ′ two-phase alloys by cold rolling
514
Fabrication of thin scintillator foils
515
Fabrication of thin scintillator foils
516
Fabrication of thin self-supporting platinum targets using evaporation techniques
517
Fabrication of thin self-supporting platinum targets using evaporation techniques
518
Fabrication of thin-film electrochemical sensors from single-walled carbon nanotubes by vacuum filtration Original Research Article
519
Fabrication of thin-film gadolinia-doped ceria (GDC) interdiffusion barrier layers for intermediate-temperature solid oxide fuel cells (IT-SOFCs) by chemical solution deposition (CSD)
520
Fabrication of thin-film lithium batteries with 5-V-class LiCoMnO4 cathodes
521
Fabrication of thin-film nanofibrous composite membranes by interfacial polymerization using ionic liquids as additives
522
Fabrication of thin-walled 316L stainless steel seamless pipes by extrusion technology
523
Fabrication of three dimensional polymeric scaffolds with spherical pores
524
Fabrication of three-dimensional ceramic photonic crystals and their electromagnetic properties
525
Fabrication of three-dimensional dendrite-like CeO2 crystallites via simple template-free solution route Original Research Article
526
Fabrication of three-dimensional GaAs–AlGaAS heterostructures for improving carrier injection efficiency in quantum-wire FETs
527
Fabrication of three-dimensional inter-connective porous ceramics via ceramic green machining and bonding
528
Fabrication of three-dimensional MoS2-graphene hybrid monoliths and their catalytic performance for hydrodesulfurization
529
Fabrication of three-dimensional nanoporous nickel films with tunable nanoporosity and their excellent electrocatalytic activities for hydrogen evolution reaction
530
Fabrication of three-dimensional network of ZnO tetratpods and its response to ethanol
531
Fabrication of three-dimensional ordered macroporous titanium oxide by the liquid-phase deposition method using colloidal template
532
Fabrication of three-dimensional photonic crystals with two-beam holographic lithography
533
Fabrication of three-dimensional poly(ε-caprolactone) scaffolds with hierarchical pore structures for tissue engineering
534
Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro
535
Fabrication of three-dimensional porous graphene–manganese dioxide composites as electrode materials for supercapacitors
536
Fabrication of three-dimensional substrates for Li microbatteries on Si
537
Fabrication of three-dimensionally close-packed aggregate of particles under mechanical vibration
538
Fabrication of three-dimensionally ordered macroporous Ta2O5 films through aqueous organic gel process
539
Fabrication of Ti/cluster diamond/TiC in situ composites
540
Fabrication of Ti/polymer biocomposites for load-bearing implant applications
541
Fabrication of Ti2AlC-Ti3AlC2-Ti3SiC2 composite by spark plasma sintering (SPS) method from elemental powders
542
Fabrication of Ti3SiC2-based ceramic matrix composites by a powder-free SHS technique
543
Fabrication of TiAl alloys by MA-PDS process and the mechanical properties
544
Fabrication of Ti–Al coatings by mechanical alloying method
545
Fabrication of TiAl components by means of hot forging and machining
546
Fabrication of TiAl3 coating on TiAl-based alloy by Al electrodeposition from dimethylsulfone bath and subsequent annealing
547
Fabrication of TiB2 and TiB2–TiC particulates reinforced magnesium matrix composites
548
Fabrication of TiB2 and TiB2–TiC particulates reinforced magnesium matrix composites
549
Fabrication of TiB2 reinforced Al3Ti composite layer on Ti substrate by reactive-pulsed electric current sintering
550
Fabrication of TiB2 reinforced Al3Ti composite layer on Ti substrate by reactive-pulsed electric current sintering
551
Fabrication of TiB2-Fe-Al Cermet Alloys Synthesized by Pulsed Current Process
552
Fabrication of TiC and TiB2 locally reinforced steel matrix composites using a Fe–Ti–B4C–C system by an SHS-casting route
553
Fabrication of TiC Particulate Reinforced Ni-50Fe Super Alloy Matrix Composite Powder by Mechanical Alloying
554
Fabrication of TiCp/Mg composites by powder metallurgy
555
Fabrication of TiCp/Ti–6Al–4V surface composite via friction stir processing (FSP): Process optimization, particle dispersion-refinement behavior and hardening mechanism
556
Fabrication of Ti–Cu–Al coatings with amorphous microstructure on Ti–6Al–4 V alloy substrate via high-energy mechanical alloying method
557
Fabrication of TiN nanorods by electrospinning and their electrochemical properties
558
Fabrication of tin oxide film by sol–gel method for photovoltaic solar cell system
559
Fabrication of TiN reinforced aluminium metal matrix composites through a powder metallurgical route
560
Fabrication of TiN reinforced aluminium metal matrix composites through a powder metallurgical route
561
Fabrication of TiN reinforced aluminium metal matrix composites through a powder metallurgical route
562
Fabrication of Ti-nanowires in sapphire single crystals
563
Fabrication of TiNi Powder by Mechanical Alloying and Shape Memory Characteristics of the Sintered Alloy
564
Fabrication of Ti–O/Ti–N duplex coatings on biomedical titanium alloys by metal plasma immersion ion implantation and reactive plasma nitriding/oxidation
565
Fabrication of TiO2 film with different morphologies on Ni anode and application in photoassisted water electrolysis
566
Fabrication of TiO2 hollow fibers with surface nanostructure
567
Fabrication of TiO2 Nanoparticles Carbon Paste Electrode Bulk-Modified with Novel Hydroquinone for Determination of Ascorbic Acid
568
Fabrication of TiO2 nanoparticles/surfactant polymer complex film on glassy carbon electrode and its application to sensing trace dopamine
569
Fabrication of TiO2 nanorod array/semiconductor nanocrystal hybrid structure for photovoltaic applications
570
Fabrication of TiO2 porous thin films using peg templates and chemistry of the process
571
Fabrication of TiO2 Tubules by Template Synthesis and Hydrolysis with Water Vapor
572
Fabrication of TiO2 μ-donuts by sol–gel spin coating using a polymer mask
573
Fabrication of TiO2/Pt core–shell particles by electroless metal plating
574
Fabrication of TiO2/SiO2 multilayer film structure by the sol–gel process with efficient thermal treatment methods
575
Fabrication of TiO2/ZnO composite nanofibers by electrospinning and their photocatalytic property
576
Fabrication of TiO2/γ-CD films for nitro aromatic compounds and its sensing application via cyclic surface-polarization impedance (cSPI) spectroscopy
577
Fabrication of TiO2/γ-CD films for nitro aromatic compounds and its sensing application via cyclic surface-polarization impedance (cSPI) spectroscopy
578
Fabrication of TiO2-coated magnetic nanoparticles on functionalized multi-walled carbon nanotubes and their photocatalytic activity
579
Fabrication of TiO2–ZrO2 coating on continuously porous SiC–Si3N4 composites
580
Fabrication of titania coatings on stainless steel via laser-induced deposition of colloidal titanium oxide from sol–gel suspension
581
Fabrication of titania dense layers by electrophoretic deposition in aqueous media
582
Fabrication of titania/hydroxyapatite composite granules for photo-catalyst
583
Fabrication of titanium bipolar plates by rubber forming and performance of single cell using TiN-coated titanium bipolar plates
584
Fabrication of titanium carbide film on bearing steel by plasma immersion ion implantation and deposition
585
Fabrication of titanium dioxide ceramics by laser sintering green layers prepared via aerosol assisted spray deposition
586
Fabrication of Titanium Dioxide Nanofiber Composite and Using in Modified Carbon Paste Electrode for Determination of Tryptophan in the Presence of Penicillamine and Folic acid
587
Fabrication of titanium dioxide nanofibers containing hydroxyapatite nanoparticles
588
Fabrication of titanium oxide nanotube arrays by anodic oxidation
589
Fabrication of titanium parts by massive diffusion bonding
590
Fabrication of transition edge sensor X-ray microcalorimeters for Constellation-X
591
Fabrication of transition edge sensor X-ray microcalorimeters for Constellation-X
592
Fabrication of transition metal nitride field emitters
593
Fabrication of transition metal sulfides nanocrystallites via an ethylenediamine-assisted route
594
Fabrication of translucent alumina ceramics from pre-sintered bodies infiltrated with sintering additive precursor solutions
595
Fabrication of transmutation fuels and targets: the ECRIX and CAMIX-COCHIX experience
596
Fabrication of transparent AlN ceramics
597
Fabrication of transparent alumina (Al2O3) nanofibers by electrospinning
598
Fabrication of transparent borate glasses containing β-BaB2O4 by incorporation method
599
Fabrication of transparent borate glasses containing β-BaB2O4 by incorporation method
600
Fabrication of transparent ceramics through melt solidification of near eutectic compositions in HfO2–Al2O3–GdAlO3 system
601
Fabrication of transparent conducting ATO films using the ATO sintered targets by pulsed laser deposition
602
Fabrication of transparent conductive carbon nanotubes/polyurethane-urea composite films by solvent evaporation-induced self-assembly (EISA)
603
Fabrication of transparent electro-optic (K0.5Na0.5)1−xLixNb1−xBixO3 lead-free ceramics
604
Fabrication of transparent La2Hf2O7 ceramics from combustion synthesized powders
605
Fabrication of transparent LaAlO3/t-ZrO2 nanoceramics through controlled amorphous crystallization
606
Fabrication of transparent lead lanthanum scandium niobate ceramics by two-stage atmosphere sintering
607
Fabrication of transparent neodymium-doped yttrium aluminum garnet ceramics by high solid loading suspensions
608
Fabrication of transparent p–n junction diode based on oxide semiconductors deposited by RF magnetron sputtering
609
Fabrication of Transparent Polycrystalline Yttria Ceramics by Combination of SPS and HIP
610
Fabrication of transparent SiO2 glass by pressureless sintering and spark plasma sintering
611
Fabrication of transparent superhydrophobic silica-based film on a glass substrate
612
Fabrication of transparent superhydrophobic surface on thermoplastic polymer using laser beam machining and compression molding for mass production
613
Fabrication of transparent Y2O3 ceramics via aqueous gelcasting
614
Fabrication of transparent Yb,Cr:YAG ceramics by a solid-state reaction method
615
Fabrication of transparent yttria by HIP and the glass-encapsulation method
616
Fabrication of transparent, flexible conducing graphene thin films via soft transfer printing method
617
Fabrication of transparent–colorless Nb2O5 nanocrystal layers and their photocatalytic evaluation using organosilane thin films
618
Fabrication of triazinedithiol functional polymeric nanofilm by potentiostatic polymerization on aluminum surface Review Article
619
Fabrication of triblock ABA type peptide dendrimer based on glutamic acid dimethyl ester and PEG as a potential nano drug delivery agent
620
Fabrication of tridoped p-ZnO thin film and homojunction by RF magnetron sputtering
621
Fabrication of tubular electrolytes for solid oxide fuel cells using strontium- and magnesium-doped LaGaO3 materials
622
Fabrication of tubular NiO/YSZ anode-support of solid oxide fuel cell by gelcasting
623
Fabrication of tubular tissue constructs by centrifugal casting of cells suspended in an in situ crosslinkable hyaluronan-gelatin hydrogel
624
Fabrication of tunable colloid crystals from amine-terminated polyamidoamine dendrimers
625
Fabrication of tunable micropatterned substrates for cell patterning via microcontact printing of polydopamine with poly(ethylene imine)-grafted copolymers
626
Fabrication of tunable microreactor with enzyme modified magnetic nanoparticles for microfluidic electrochemical detection of glucose Original Research Article
627
Fabrication of Tunable Superhydrophobic Surfaces by Nanosphere Lithography
628
Fabrication of tungsten microelectrodes using pulsed electrochemical machining
629
Fabrication of tungsten oxide microfibers with photocatalytic activity by electrospunning from PVA/H3PW12O40 gel
630
Fabrication of tungsten-based metallic glasses by low purity industrial raw materials
631
Fabrication of tunnel junctions for direct detector arrays with single-electron transistor readout using electronbeam lithography
632
Fabrication of tunnel junctions on thick X-ray absorbing substrates of Nb and Ta
633
Fabrication of tunnel junctions on thick X-ray absorbing substrates of Nb and Ta
634
Fabrication of two- and three-dimensional model catalyst systems with monodispersed platinum nanoparticles as active metal building blocks
635
Fabrication of two biomimetic superhydrophobic polymeric surfaces
636
Fabrication of two domain Cu2O(0 1 1) films on MgO(0 0 1) by pulsed laser deposition
637
Fabrication of two supramolecular self-assemblies of Mn(II)-dicarboxylates with trans-4,4′-azobispyridine: Analysis of H-bonding interactions with Hirshfeld surfaces and DFT calculations
638
Fabrication of two-dimensional infrared photonic crystals by deep reactive ion etching on Si wafers and their optical properties
639
Fabrication of two-dimensional in-plane gate transistors by focused ion beam doping
640
Fabrication of Two-Dimensional J-Aggregates on Au(lll) Covered with Self-Assembled Cysteamine Monolayer
641
Fabrication of two-dimensional lattices by using photosensitive sol–gel and four-beam laser interference
642
Fabrication of two-dimensional n- and p-type in-plane gate transistors from the same p-doped GaAs/In0.1Ga0.9As/Al0.33Ga0.67As heterostructure
643
Fabrication of two-dimensional periodic relief grating of tethered polystyrene on silicon surface as solvent sensors
644
Fabrication of Two-Dimensional Photonic Crystals with Controlled Defects by Use of Multiple Exposures and Direct Write
645
Fabrication of two-dimensional p–n junctions formed by compensation doping of p-modulation doped GaAs/InyGa1−yAs/AlxGa1−x As heterostructures
646
Fabrication of TZ-3Y20A/Mo multilayer composites by particle sedimentation method
647
FABRICATION OF ULTRA LOW VOLUME (ULV) PESTICIDE SPRAYER TEST BENCH
648
Fabrication of Ultra Precision Optics by Numerically Controlled Local Wet Etching
649
Fabrication of ultra-clean copper surface to minimize field emission dark currents
650
Fabrication of ultra-clean copper surface to minimize field emission dark currents
651
Fabrication of ultra-clean copper surface to minimize field emission dark currents
652
Fabrication of ultrafine edible emulsions: Comparison of high-energy and low-energy homogenization methods
653
Fabrication of ultra-fine grained and dispersion-strengthened titanium materials by spark plasma sintering
654
Fabrication of ultrafine hollow Ni and Ni/Fe fibers and their dispersion characteristics in the epoxy matrix
655
Fabrication of ultrafine mullite powders
656
Fabrication of ultrafine powder from eri silk through attritor and jet milling
657
Fabrication of ultrafine tungsten-based alloy powders by novel soda reduction process
658
Fabrication of ultrafine-grained alumina ceramics by two different fast sintering methods
659
Fabrication of ultrafine-grained Mg–3Al–1Zn magnesium alloy sheets using a continuous high-ratio differential speed rolling technique
660
Fabrication of ultrahydrophobic poly(lauryl acrylate) brushes on silicon wafer via surface-initiated atom transfer radical polymerization
661
Fabrication of ultra-low radioactivity detector holders for Edelweiss-II
662
Fabrication of ultra-low radioactivity detector holders for Edelweiss-II
663
Fabrication of ultrathin graphene oxide-coated membrane with hydrophilic properties for arsenate removal from water
664
Fabrication of ultrathin polyelectrolyte fibers and their controlled release properties
665
Fabrication of ultrathin silicon dioxide layers in room temperature by ultrahigh vacuum plasma oxidation
666
Fabrication of ultrathin silicon dioxide layers in ultra high vacuum
667
Fabrication of undoped-TiO2 nanostructure-based NO2 high temperature gas sensor using low frequency AC electrophoretic deposition method
668
Fabrication of unidirectional porous TiAl–Mn intermetallic compounds by reactive sintering using extruded powder mixtures
669
Fabrication of uniform Au silicide islands on the Si(1 1 1)-(7 × 7) substrate
670
Fabrication of uniform porous alumina materials by radio frequency (RF) magnetron sputtering
671
Fabrication of uniform SnO2–SiO2–Pt composite nanofibres via co-electrospinning
672
Fabrication of uniform ZrC coating layer for the coated fuel particle of the very high temperature reactor
673
Fabrication of uniformly dispersed Ag nanoparticles loaded TiO2 nanotube arrays for enhancing photoelectrochemical and photocatalytic performances under visible light irradiation
674
Fabrication of unusually stable amorphous calcium carbonate in an ethanol medium
675
Fabrication of uranium oxycarbide kernels and compacts for HTR fuel
676
Fabrication of UV/ TiO2 nanotubes / Pd system by electrochemical anodization for furfural photocatalytic degradation
677
Fabrication of UV-crosslinked chitosan scaffolds with conjugation of RGD peptides for bone tissue engineering
678
Fabrication of UV-curable polyurethane acrylate composites containing surface-modified boron nitride for underwater sonar encapsulant application
679
Fabrication of uv-opaque and visible-transparent composite film
680
Fabrication of V2O3/C core–shell structured composite and VC nanobelts by the thermal treatment of VO2/C composite
681
Fabrication of vacuum-evaporated SnS/CdS heterojunction for PV applications
682
Fabrication of vapor and gas sensors using films of aligned CNx nanotubes
683
Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process
684
Fabrication of various electrical resistances producing Zn nanowires and subsequent oxidation fabricating ZnO nanowires in PAA template by periodic and pulsed electrochemical deposition
685
Fabrication of various electroless Ni–P alloy/multiwalled carbon nanotube composite films on an acrylonitrile butadiene styrene resin
686
Fabrication of various tip-size AFM probes for evaluating single-molecular retraction force between actin and anti-actin
687
Fabrication of various tip-size AFM probes for evaluating single-molecular retraction force between actin and anti-actin
688
Fabrication of versatile nanoporous templates with high aspect ratios by incorporation of Si-containing block copolymer into the lithographic bilayer system
689
Fabrication of vertically aligned CuInSe2 nanorod arrays by template-assisted mechanical approach
690
Fabrication of vertically aligned single-walled carbon nanotubes in atmospheric pressure non-thermal plasma CVD Original Research Article
691
Fabrication of very high quantum efficiency planar InGaAs PIN photodiodes through prebake process
692
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique
693
Fabrication of viscous and paste-like materials by controlled heteroaggregation of oppositely charged lipid droplets
694
Fabrication of visible-light-responsive titanium dioxide layer on titanium using anodic oxidization in nitric acid
695
Fabrication of W/FMS joint mock-ups using a hot isostatic pressing
696
Fabrication of W–20 wt.%Cu alloys by powder injection molding
697
Fabrication of wafer scale, aligned sub-25 nm nanowire and nanowire templates using planar edge defined alternate layer process
698
Fabrication of water-dispersible and biocompatible red fluorescent organic nanoparticles via PEGylation of aggregate induced emission enhancement dye and their cell imaging applications
699
Fabrication of waveguides in Yb:YCOB crystal by MeV oxygen ion implantation
700
Fabrication of wavelength-tunable butt-coupled sampled grating DBR lasers using planar buried heterostructure
701
Fabrication of WC/Fe composite coating by centrifugal casting plus in-situ synthesis techniques
702
Fabrication of WC–Co cermets by laser engineered net shaping
703
Fabrication of WC–Co coatings by cold spray deposition
704
Fabrication of W–Cu composite by resistance sintering under ultra-high pressure
705
Fabrication of W–Cu functionally graded materials with high density by particle size adjustment and solid state hot press
706
Fabrication of W–Cu/CeO2 composites with excellent electric conductivity and high strength prepared from copper-coated tungsten and Ceria powders
707
Fabrication of wedge-shape tool via electrochemical micromachining with diamond-like carbon coating
708
Fabrication of well ordered Zn nanorod arrays by ion irradiation method at room temperature and effect on crystal orientations
709
Fabrication of well-aligned CdS nanotubes by CVD-template method
710
Fabrication of well-controlled porous foams of graphene oxide modified poly(propylene-carbonate) using supercritical carbon dioxide and its potential tissue engineering applications
711
Fabrication of well-crystallized mesoporous ZrO2 thin films via Pluronic P123 templated sol–gel route
712
Fabrication of well-defined individual dislocations in SiGe as a novel one-dimensional system
713
Fabrication of well-defined PLGA scaffolds using novel microembossing and carbon dioxide bonding
714
Fabrication of well-defined superparamagnetic rattle-type Fe3O4@polyaniline hollow microspheres with large cavity
715
Fabrication of well-dispersed, multiwalled carbon nanotubes-reinforced aluminum matrix composites
716
Fabrication of well-ordered molecular device arrays
717
Fabrication of whey protein–pectin conjugate particles through laccase-induced gelation of microemulsified nanodroplets
718
Fabrication of white organic light emitting diode using PHF doped with rubrene
719
Fabrication of wide-gap Cu(In1−xGax)Se2 thin film solar cells: a study on the correlation of cell performance with highly resistive i-ZnO layer thickness
720
Fabrication of winding model of high-T/sub c/ superconducting transformer for railway rolling stock
721
Fabrication of Window Saddles for NIF Cryogenic Hohlraums
722
Fabrication of WO3 nanodot-based microsensors highly sensitive to hydrogen
723
Fabrication of WO3 nanotube sensors and their gas sensing properties
724
Fabrication of wood-like porous silicon carbide ceramics without templates
725
Fabrication of xenogeneic bone-derived hydroxyapatite thin film by aerosol deposition method
726
Fabrication of X-ray compatible microfluidic platforms for protein crystallization
727
Fabrication of X-ray mirrors for synchrotron applications
728
Fabrication of X-ray mirrors for synchrotron applications
729
Fabrication of Y3Al5O12-Al2O3 eutectic materials having ultra fine microstructure
730
Fabrication of YAG mono-dispersed particles with a novel combination method employing supercritical water process
731
Fabrication of YAG transparent ceramics by two-step sintering
732
Fabrication of YAG–SiC nanocomposites by spark plasma sintering
733
Fabrication of YBa2Cu3O7−x film by metalorganic deposition method using trifluoroacetates and its process conditions Original Research Article
734
Fabrication of Y-Ba-Cu-O films on surface-oxidation epitaxy (SOE) processed substrates
735
Fabrication of YBCO multi-layer wiring with a polished PBCO insulator
736
Fabrication of Y-doped barium cerium zirconate thin films by electrostatic spray deposition technique for protonic ceramic fuel cell application
737
Fabrication of yttria-stabilized-zirconia coatings using electrophoretic deposition: Effects of agglomerate size distribution on particle packing
738
Fabrication of yttria-stabilized-zirconia thick coatings via slurry process with pressure infiltration
739
Fabrication of yttrium oxide and erbium oxide coatings by PVD methods
740
Fabrication of yttrium-stabilized a-SiAlON powders with rod-like crystals by combustion synthesis
741
Fabrication of Y-type zeolite films by electrophoretic deposition
742
Fabrication of zeolite L thin films with different orientations using anisotropic growth of seed crystals by secondary growth method
743
Fabrication of zero-thermal-expansion ZrSiO4/Y2W3O12 sintered body
744
Fabrication of zinc coatings on alumina balls from zinc powder by mechanical coating technique and the process analysis
745
Fabrication of Zinc incorporated Magnetic Iron Oxide Nanoparticles for Photocatalytic Degradation of Methylene Blue
746
Fabrication of zinc oxide nanoneedles on conductive textile for harvesting piezoelectric potential
747
Fabrication of zinc oxide nanorods modified activated carbon cloth electrode for desalination of brackish water using capacitive deionization approach Original Research Article
748
Fabrication of zinc oxide nanostructures on gold-coated silicon substrate by thermal chemical reactions vapor transport deposition in air
749
Fabrication of zinc oxide/poly(styrene) grafted nanocomposite latex and its dispersion
750
Fabrication of zirconia- and ceria-based thin-wall tubes by thermoplastic extrusion
751
Fabrication of zirconia-toughened alumina parts by powder injection molding process: Optimized processing parameters
752
Fabrication of zirconium carbide nanofibers by electrospinning
753
Fabrication of zirconium oxide coatings on stainless steel by a combined laser/sol–gel technique
754
Fabrication of Zirconium oxide- Hydroxyapatite nanocomposite for green preparation of m-phenylenediamine
755
Fabrication of zirconium silicide intermetallic compounds with 16H-type crystal structure
756
Fabrication of zirconium silicide intermetallic compounds with 16H-type crystal structure
757
Fabrication of ZK60 magnesium alloy thin sheets with improved ductility by cold rolling and annealing treatment
758
Fabrication of Zn containing apatite cement and its initial evaluation using human osteoblastic cells
759
Fabrication of Zn/Cd–Se micro heterostructures by electrochemical deposition in the pores of polycarbonate track-etch membranes and their characterization
760
Fabrication of Zn1-XCuXO nanoparticles and investigation of their effect on the thermal conductivity of nanofluids
761
Fabrication of Zn-Ni Alloy Coatings from Acid Chloride Bath and its Corrosion Performance
762
Fabrication of ZnO and its enhancement of charge injection and transport in hybrid organic/inorganic light emitting devices
763
Fabrication of ZnO micro- and nano-structures by electrodeposition using nanoporous and lithography defined templates
764
Fabrication of ZnO nanocomposites by picosecond laser ablation of zinc in tetrahydrofuran solution of thermoplastic polyurethane
765
Fabrication of ZnO nanocrystals dispersed in glass films for low-temperature optical studies
766
Fabrication of ZnO nanodisks from structural transformation of ZnO nanorods through natural oxidation and their emission characteristics
767
Fabrication of ZnO nanoparticles based sensitive methanol sensor and efficient photocatalyst
768
Fabrication of ZnO nanoparticles by pulsed laser ablation in aqueous media and pH-dependent particle size: An approach to study the mechanism of enhanced green photoluminescence
769
Fabrication of ZnO nanoparticles by solutioncombustion method for the photocatalytic degradation of organic dye
770
Fabrication of ZnO nanorods using metal nanoparticles as growth nuclei
771
Fabrication of ZnO nanostructures of various dimensions using patterned substrates
772
Fabrication of ZnO nanostructures sensitized with CdS quantum dots for photovoltaic application using a convenient solution method
773
Fabrication of ZnO nanowires and nanorods
774
Fabrication of ZnO nanowires through thermal heating of metallic Zn by solar energy
775
Fabrication of ZnO thin film-nanowires hybrid homojunction on silicon substrate
776
Fabrication of ZnO thin films by the photochemical deposition method
777
Fabrication of ZnO/Al2O3 core–shell nanostructures and crystalline Al2O3 nanotube
778
Fabrication of ZnO/CuO Hybrid Nanocomposite for Photocatalytic Degradation of Brilliant Cresyl Blue (BCB) Dye in Aqueous Solutions
779
Fabrication of ZnO/CuS core/shell nanoarrays for inorganic–organic heterojunction solar cells
780
Fabrication of ZnO/SrTiO3 nanoarrays and its photoelectrochemical performances
781
Fabrication of ZnO:Mn nanoparticles with organic shell in a highly alkaline aqueous environment
782
Fabrication of ZnS/ZnO hierarchical nanostructures by two-step vapor phase method
783
Fabrication of ZnWO4:Sm3+, Bi3+, Li+ with tunable white light-emitting properties for W-LEDs
784
Fabrication of zonal thiol-functionalized silica nanofibers for removal of heavy metal ions from wastewater
785
Fabrication of Zr- and Cu-base bulk metallic glass/Cu surface composites by high-energy electron-beam irradiation
786
Fabrication of Zr and Zr–N surface alloying layers and hardness improvement of Ti–6Al–4V alloy by plasma surface alloying technique
787
Fabrication of ZrO2/AISI316L functionally graded materials for joint prostheses
788
Fabrication of ZrO2–NiCr functionally graded material by powder metallurgy
789
Fabrication of α-Fe2O3 hexagonal disc/SnO2 nanoparticle semiconductor nanoheterostructures and its properties
790
Fabrication of β-BaB2O4 layers on (0 0 1) Sr2+-doped α-BaB2O4 by vapor transport equilibration (VTE)
791
Fabrication of β-FeSi2/Si composite films for photovoltaic applications by using scanning annealing
792
Fabrication of β-Si3N4 whiskers by combustion synthesis with MgSiN2 as additives
793
Fabrication of β-Si3N4 whiskers from a GPSed-RBSN sponge using 6Y2O3–2MgO additives
794
Fabrication of β-sialon powder from kaolin
795
Fabrication of κ-carrageenan fibers by wet spinning: Addition of ι-carrageenan
796
Fabrication of a vermifiltration unit for wastewater recycling and performance of vermifiltered water (vermiaqua) on onion (Allium cepa)
797
Fabrication on porous alumina tube by centrifugal molding
798
Fabrication optimization of acrylonitrile butadiene styrene (ABS)/polyvinylpyrrolidone (PVP) nanofiltration membrane using response surface methodology Original Research Article
799
Fabrication parameters and NO2 sensitivity of reactively RF-sputtered In2O3 thin films
800
Fabrication process and electrical properties of BaTiO3/Ni nanocomposites
801
Fabrication process and system for neutron refractive optics
802
Fabrication process and system for neutron refractive optics
803
Fabrication process of carbon nanotube/light metal matrix composites by squeeze casting
804
Fabrication process optimization for improved mechanical properties of Al 7075/SiCp metal matrix composites
805
Fabrication process responsible for fundamentally improving Silicon X-ray microcalorimeter arrays
806
Fabrication process responsible for fundamentally improving Silicon X-ray microcalorimeter arrays
807
Fabrication process suitability ranking for micro-electro-mechanical systems using a fuzzy inference system
808
Fabrication process validation for a double-sided silicon pixel detector
809
Fabrication process validation for a double-sided silicon pixel detector
810
Fabrication processing condition for dense sintered La0.6AE0.4MnO3 perovskites synthesized by the coprecipitation method (AE=Ca and Sr)
811
Fabrication Research
812
Fabrication results of full scale mock-up for ITER VV port in Korea
813
Fabrication scheduling on a single machine with due date constraints
814
Fabrication Smart pH Bionanocomposite Film Based on Biocompatible Polymer and Roslle Calyx Extract/Nano-Zinc Oxide for Monitoring Rainbow Trout Fillets
815
Fabrication strategy for amphiphilic microcapsules with narrow size distribution by premix membrane emulsification
816
Fabrication stresses inducing cracking of a mould made of copper
817
Fabrication study of polysulfone hollow-fiber microfiltration membranes: Optimal dope viscosity for nucleation and growth
818
Fabrication study on the cooling module of the ITER neutral beam duct liner
819
Fabrication techniques and material properties of dielectric MgO thin films—A status review
820
FABRICATION TECHNIQUES AND MICROSTRUCTURE CLASSIFICATIONS OF ZIRCONIA
821
Fabrication techniques for colymer/Si optical waveguide
822
Fabrication technologies for oxide–oxide ceramic matrix composites based on electrophoretic deposition
823
Fabrication technology and material characterization of carbon fibre reinforced magnesium
824
Fabrication technology for a series of cylindrical thin-wall cavity targets
825
Fabrication technology for a series of cylindrical thin-wall cavity targets
826
Fabrication technology of SiGe hetero-structures and their properties
827
Fabrication temperature sensing by using ZnO Nanoparticles
828
Fabrication using a levitation melting method of V–4Cr–4Ti–Si–Al–Y alloys and their mechanical properties
829
Fabrication variables affecting the structure and properties of supported carbon molecular sieve membranes for hydrogen separation
830
Fabrication, and Effect of Reflux time on Structural Properties of Pure and Al-Doped TiO2 Nano-rod
831
Fabrication, assembly and tests of a MEMS-based safe, arm and fire device Original Research Article
832
Fabrication, assembly, and characterization of molecular electronic components
833
Fabrication, assembly, and testing of RF MEMS capacitive switches using flexible printed circuit technology
834
Fabrication, biological effects, and medical applications of calcium phosphate nanoceramics
835
Fabrication, biomolecular binding, in vitro drug release behavior of sugar-installed nanoparticles from star poly(ɛ-caprolactone)/glycopolymer biohybrid with a dendrimer core
836
Fabrication, characterisation and application of (8 mol% Y2O3) ZrO2 thin film on Na3Zr2Si2PO12 substrate for sensing CO2 gas
837
Fabrication, characterization and antibacterial properties of Ag2O QDs in molecular sieve matrix synthesized from rice husk silica at room temperature
838
Fabrication, characterization and antimicrobial activities of thymol-loaded zein nanoparticles stabilized by sodium caseinate–chitosan hydrochloride double layers
839
Fabrication, characterization and application in electromagnetic wave absorption of flower-like ZnO/Fe3O4 nanocomposites
840
Fabrication, characterization and application of graphite ring ultramicroelectrodes for kinetic studies of fuel cell reactions under high mass-transport rates
841
Fabrication, Characterization and Application of NiSO4 Modified Carbon Paste Electrode for the Detection of 2-Thiouracil in Biological Fluids
842
Fabrication, characterization and application of nitrogen-containing carbon nanospheres obtained by pyrolysis of lignosulfonate/poly(2-ethylaniline)
843
Fabrication, characterization and application of pectin degrading Fe3O4–SiO2 nanobiocatalyst
844
Fabrication, Characterization and Application of Poly (L-Cystine)/multi Walled Carbon Nanotubes Modified Glassy Carbon Electrode towards the Simultaneous Determination of Dopamine in presence of Uric Acid and Folic Acid
845
Fabrication, characterization and applications of novel nanoheater structures
846
Fabrication, characterization and conductivity of organic–inorganic hybrid Langmuir–Blodgett films based on polyquinoline and rare earth-substituted heteropolymolybdate
847
Fabrication, Characterization and Development of a Modified Poly(Bromocresol Purple/Multiwalled Carbon Nanotubes) Carbon Paste Electrode for the Determination of Sulfanilic acid
848
Fabrication, characterization and electrochemistry of organic–inorganic multilayer films containing polyoxometalate and polyviologen via layer-by-layer self-assembly
849
Fabrication, characterization and evaluation of anti-cancer and antibacterial properties of nanosystems containing Hedera Helix aqueous extracts
850
Fabrication, characterization and evaluation of bioceramic hollow microspheres used as microcarriers for 3-D bone tissue formation in rotating bioreactors
851
Fabrication, characterization and growth mechanism of heterostructured zinc oxide nanostructures via solution method
852
Fabrication, characterization and in vitro biocompatibility evaluation of porous Ta–Nb alloy for bone tissue engineering
853
Fabrication, characterization and in vitro drug release behavior of electrospun PLGA/chitosan nanofibrous scaffold
854
Fabrication, characterization and in-vitro evaluation of nanostructured zirconia/hydroxyapatite composite film on zirconium
855
Fabrication, characterization and lipase digestibility of food-grade nanoemulsions
856
Fabrication, characterization and magnetic behaviour of alumina-doped zinc ferrite nano-particles
857
Fabrication, characterization and magnetic behaviour of alumina-doped zinc ferrite nano-particles
858
Fabrication, characterization and mechanical properties of hybrid composites of copper using the nanoparticulates of SiC and carbon nanotubes
859
Fabrication, characterization and microwave properties of polyurethane nanocomposites reinforced with iron oxide and barium titanate nanoparticles Original Research Article
860
Fabrication, characterization and modeling of single-crystal thin film calorimeter sensors
861
Fabrication, characterization and modification of nanodimensional silica hybrid multilayered materials
862
Fabrication, Characterization and Osteoblast Response of Cobalt-Based Alloy/Nano Bioactive Glass Composites
863
Fabrication, characterization and photocatalytic activity of cubic-like ZnMn2O4
864
Fabrication, characterization and photocatalytic properties of Ag/AgI/BiOI heteronanostructures supported on rectorite via a cation-exchange method
865
Fabrication, characterization and photoelectrochemical properties of Fe2O3 modified TiO2 nanotube arrays
866
Fabrication, characterization and preliminary testing of all-inorganic ultrafiltration membranes composed entirely of a naturally occurring sepiolite clay mineral
867
Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers
868
Fabrication, characterization and property evaluation of mixed carbide fuels for a test Fast Breeder Reactor
869
Fabrication, characterization and Raman study of TiO2 nanowire arrays prepared by anodic oxidative hydrolysis of TiCl3
870
Fabrication, characterization and sensing properties of Cu(II) ion imprinted sol–gel thin film on QCM
871
Fabrication, characterization and some applications of graded chiral zigzag shaped nano-sculptured silver thin films
872
Fabrication, characterization and wear corrosion testing of bioactive hydroxyapatite/nano-TiO2 composite coatings on anodic Ti–6Al–4V substrate for biomedical applications
873
Fabrication, characterization, and application in nanoenergetic materials of uncracked nano porous silicon thick films
874
Fabrication, characterization, and biological applications of TiO2 nanoparticles coated by chitosan
875
Fabrication, characterization, and biological assessment of multilayered DNA-coatings for biomaterial purposes
876
Fabrication, characterization, and cytotoxicity evaluation of cranberry procyanidins-zein nanoparticles
877
Fabrication, characterization, and dynamic behavior of polyester/TiO2 nanocomposites
878
Fabrication, characterization, and dynamic behavior of polyester/TiO2 nanocomposites
879
Fabrication, characterization, and electrical conductivity properties of Pr6O11 nanoparticles
880
Fabrication, characterization, and evaluation of the cytotoxicity of platinum–rhodium nanocomposite materials for use in ammonia treatment
881
Fabrication, characterization, and magnetic behavior of porous ZnFe2O4 hollow microspheres
882
Fabrication, characterization, and magnetic properties of copper ferrite nanoparticles prepared by a simple, thermal-treatment method
883
Fabrication, characterization, and measurement of some physicochemical properties of ZnO nanofluids
884
Fabrication, characterization, and mechanism of vertically aligned titanium nitride nanowires
885
Fabrication, characterization, and microscopic imaging of Fe2O3- modified electrospun nanofibers
886
Fabrication, characterization, and optimization of a novel copperincorporated chitosan/gelatin-based scaffold for bone tissue engineering applications
887
Fabrication, characterization, and photocatalytic degradation of malachite green by CuO nanocatalyst
888
Fabrication, characterization, cathodoluminescence, and field-emission properties of silica (SiO2) nanostructures
889
Fabrication, characterization, exchange coupling and magnetic behavior of CoFe2O4/CoFe2 nanocomposite nanofibers
890
Fabrication, Characterization, Regeneration and Application of Nanomagnetic Fe3O4@Fish Scale as a Bio-adsorbent for Removal of Methylene Blue
891
Fabrication, characterization, transportation of ions and antibacterial potential of polystyrene based Cu3 (PO4)2/Ni3 (PO4)2 composite membrane
892
Fabrication, fouling and foulant analyses of asymmetric polysulfone (PSF) ultrafiltration membrane fouled with natural organic matter (NOM) source waters
893
Fabrication, growth mechanism and antibacterial activity of ZnO micro-spheres prepared via solution process
894
Fabrication, in vitro degradation and the release behaviours of poly(dl-lactide-co-glycolide) nanospheres containing ascorbic acid
895
Fabrication, Injection, and Tracking of Fast Ignition Targets: Status and Future Prospects
896
Fabrication, magnetism and high frequency application of exchange-coupled Fe65Co35±2–SiO1.7±0.2 granular films
897
Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds
898
Fabrication, mechanical testing and application of high-pressure glass microreactor chips
899
Fabrication, microstructure and compressive behavior of ZC63 Mg–microballoon foam composites
900
Fabrication, microstructure and critical current density of pure and Cu doped MgB2 thick films on Cu, Ni and stainless steel substrates by short-time in-situ reaction
901
Fabrication, microstructure and electrical conductivity of V2O5 ceramics
902
Fabrication, microstructure and mechanical behavior of SiCw-B4C–Si composite
903
Fabrication, microstructure and mechanical properties of Al2O3/Ni nanocomposites by a chemical method
904
Fabrication, microstructure and mechanical properties of novel bulk binderless (Ti0.8Zr0.2)C carbides prepared by mechanical alloying and spark plasma sintering
905
Fabrication, microstructure and mechanical properties of novel cemented hard alloy obtained by mechanical alloying and hot-pressing sintering
906
Fabrication, microstructure and properties of a YSZ electrolyte for SOFCs
907
Fabrication, microstructure and properties of Fe–TiC ceramic–metal composites
908
Fabrication, microstructure and tribological behavior of pulsed laser deposited a-CNx/TiN multilayer films
909
Fabrication, microstructure, and mechanical properties of high strength cobalt sub-micron structures
910
Fabrication, microstructure, and mechanical properties of tin nanostructures
911
Fabrication, microstructure, mechanical and transporting properties of BaZrO3-particles-dispersed YBa2Cu3O7−δ mixed conduction composites
912
Fabrication, modelling and evaluation of microstructured materials in a digital framework
913
Fabrication, morphology and mechanical properties of Ti and metastable Ti-based alloy foams for biomedical applications
914
Fabrication, morphology and optical properties of GaN nanorods by ammoniating Ga2O3/Nb films
915
Fabrication, morphology, and photoluminescence properties of GaN nanowires and nanorods by ammoniating Ga2O3/V films on Si(1 1 1)
916
Fabrication, nanomechanical characterization, and cytocompatibility of gold-reinforced chitosan bio-nanocomposites
917
Fabrication, optical transmittance, and hardness of IR-transparent ceramics made from nanophase yttria
918
Fabrication, properties and application of porous metals with directional pores
919
Fabrication, properties and applications of bulk glassy alloys in late transition metal-based systems
920
Fabrication, properties and bioapplications of cellulose/collagen hydrolysate composite films
921
Fabrication, properties and usage of single-crystalline YAG fibres
922
Fabrication, properties, and cytocompatibility of ZrC film on electropolished NiTi shape memory alloy
923
Fabrication, sintering and electrical properties of cobalt oxide doped Gd0.1Ce0.9O2 − δ
924
Fabrication, stability and efficacy of dual-component antimicrobial nanoemulsions: Essential oil (thyme oil) and cationic surfactant (lauric arginate)
925
Fabrication, structural and electrical characterization of VO2 nanowires
926
Fabrication, structural characterization and sensing properties of polydiacetylene nanofibers templated from anodized aluminum oxide
927
Fabrication, structural characterization and the photoluminescence properties of ZnO nanoneedle arrays
928
Fabrication, structure and luminescence properties of polycrystalline Tb3+-doped Lu2SiO5 films by Pechini sol–gel method
929
Fabrication, structure and magnetic properties of fluoroperovskite KMnF3 nanostructures
930
Fabrication, structure and mechanical properties of indium nanopillars Original Research Article
931
Fabrication, structure, and enhanced photocatalytic properties of hierarchical CeO2 nanostructures/TiO2 nanofibers heterostructures
932
Fabrication, structure, and photocatalytic activities of boron-doped ZnO nanorods hydrothermally grown on CVD diamond film
933
Fabrication, structure, mechanical and thermal properties of zirconia-based ceramic nanocomposites
934
Fabrication, study of optical properties and structure of most stable (CdP2)n nanoclusters
935
Fabrication, temperature stability and characteristics of Pb(ZrxTiy)O3–Pb(Zn1/3Nb2/3)O3–Pb(Ni1/3Nb2/3)O3 piezoelectric ceramics bimorph
936
Fabrication, test and performance of very large X-ray CCDs designed for astrophysical applications
937
Fabrication, test and performance of very large X-ray CCDs designed for astrophysical applications
938
Fabrication, Testing and Analysis of Composite Lattice Panels Under Three-Point Bending Load
939
Fabrication, testing and analysis of composite sandwich beams
940
Fabrication, thermal and electrical properties of polyphenylene sulphide/copper composites
941
Fabrication, thermal expansions, and mechanical properties of carbon/aluminum composites based on wood templates
942
Fabrication, thermal stability and mechanical properties of novel composite hardmetals obtained by solid-state reaction and hot-pressing sintering
943
Fabrication, thermal stability and microhardness of sputtered Ni–P–W coating
944
Fabrication: crime in research
945
Fabrications and electrochemical properties of fluorine-modified spinel LiMn2O4 for lithium ion batteries
946
Fabrications and evaluations of hydrogen permeation on Al2O3/CeO2/graphene (ACG) composites membrane by Hot Press Sintering (HPS)
947
Fabrications and properties of composite solid-state electrolytes
948
Fabrications and structural characterization of ultra-fine carbon fibres by electrospinning of polymer blends
949
Fabrications of Metallic Oxide Doped Polystyrene Shells via Emulsion Techniques
950
Fabrications of potential imaging probes based on a β-alkyl substituted porphyrin with a terpyridine external coordination site
951
Fabrications of some kinds of 2-D frameworks consisting of nanosized polyoxomolybdate anion [Mo36O112(H2O)16]8− via condensation processes
952
Fabrications of Spindt-type cathodes with aligned carbon nanotube emitters
953
Fabrications of zinc-releasing biocement combining zinc calcium phosphate to calcium phosphate cement
954
Fabrication–structure–properties relations of nano-sized NiO incorporated PZT ceramics
955
Fabric-based Tsai–Wu yield criteria for vertebral trabecular bone in stress and strain space
956
Fabric-drying process in domestic dryers
957
Fabric-drying process in domestic dryers
958
Fabrics of migmatites and the relationships between partial melting and deformation in high-grade transpressional shear zones: The Espinho Branco anatexite (Borborema Province, NE Brazil)
959
Fabrics of pre- and syntectonic granite plutons and chronology of shear zones in the Eastern Borborema Province, NE Brazil
960
Fabrics produced mimetically during static metamorphism in retrogressed eclogites from the Zermatt-Saas zone, Western Italian Alps
961
Fabry Disease (A Kind of Lysosomal Storage Disease)
962
Fabry disease mimicking multiple sclerosis
963
Fabry disease: D313Y is an (alpha)-galactosidase A sequence variant that causes pseudodeficient activity in plasma
964
Fabry’s Disease — A comprehensive review on pathogenesis, diagnosis and treatment
965
Fabry’s Disease Cardiomyopathy: Echocardiographic Detection of Endomyocardial Glycosphingolipid Compartmentalization Original Research Article
966
Fabry-Perot cavity in the field of a gravitational wave
967
Fabry–Perot fiber-optic immunosensor based on suspended layer-by-layer (chitosan/polystyrene sulfonate) membrane
968
Fabry–Perot interference, Kondo effect and Coulomb blockade in carbon nanotubes
969
Fabry-Perot interferometer using curved plates
970
Fabryʹs disease
971
Fabryʹs disease—an important risk factor for stroke
972
Fabulous art deco furniture
973
Fabulous MESs and C/Cs: an overview of semiconductor fab automation systems
974
Fac and mer dppe-substituted Fischer carbene complexes of chromium: X-ray, DFT and electrochemical study
975
fac-/mer-[RuCl3(NO)(P–N)] (P–N = [o-(N,N-dimethylamino)phenyl]diphenylphosphine): Synthesis, characterization and DFT calculations
976
Fac¸ade solar collectors
977
fac-Acetato-bis(pyrazole) complexes: A systematic study on intra- and intermolecular hydrogen bonds
978
fac-Acetonitriletricarbonyl(dimethylcarbamodithioato-κ2S,S′)rhenium(I): crystal structure and Hirshfeld surface analysis
979
Facade design optimization for naturally ventilated residential buildings in Singapore
980
Façade design recommendations towards visual compatibility of infill buildings with the Qajar architecture of the cities of Mazandaran province
981
Façade noise abatement prediction: New spectrum adaptation terms measured in field in different road and railway traffic conditions
982
Façade seismic failure simulation of an old Cathedral in Colima, Mexico by 3D Limit Analysis and nonlinear Finite Element Method
983
Facade staining arising from design features
984
Façades and summer performance of buildings
985
Facades of Suffering: Clientsʹ Photo Stories About Mental Illness
986
Face 2-Colourable Triangular Embeddings of Complete Graphs
987
Face alive
988
Face alive icon
989
Face and eyes localization algorithm in thermal images for temperature measurement of the inner canthus of the eyes
990
Face and facial expression memory in temporal lobe epilepsy patients: preliminary results
991
Face and facial expression recognition using local directional feature structure
992
Face and location processing in children with early unilateral brain injury
993
Face and neck lift:The subcutaneous approach
994
Face and neck reconstruction using ‘Super-thin flaps’ and supraclavicular flaps—A reply
995
Face and object imagery in congenital prosopagnosia: A case series
996
Face and palmprint pixel level fusion and Kernel DCV-RBF classifier for small sample biometric recognition
997
Face and politeness in pharmacist-physician interaction
998
Face and politeness: new (insights) for old (concepts)
999
Face Animation Parameter Extraction in Real Video Environment
1000
Face as mouse through visual face tracking
