<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Finite element analysis and design of fixed-ended plain channel columns
2
Finite element analysis and design of sandwich panels subject to local buckling effects
3
Finite element analysis and distributed control of laminated composite shells using LQR/IMSC approach
4
Finite element analysis and experimental confirmation of warm hydroforming process for aluminum alloy
5
Finite Element Analysis and Experimental Investigation on the Conventional and Vibration Assisted Drilling
6
Finite Element Analysis and Experimental Study of the Ultrasonic Vibration-assisted Single Point Incremental Forming (UVaSPIF) Process
7
Finite element analysis and experimental study on dynamic properties of a composite beam with viscoelastic damping
8
Finite element analysis and experiments of metal/metal wear in oscillatory contacts
9
Finite element analysis and experiments of milli-part forming of strip bending using grain element
10
Finite element analysis and experiments on a silicon membrane actuated by an epitaxial PZT thin film for localized-mass sensing applications
11
Finite element analysis and fatigue design of a welded construction machinery component using different concepts
12
Finite element analysis and formability of non-isothermal deep drawing of AZ31B sheets
13
Finite Element Analysis and in Vivo Evaluation of En-Masse Retraction of Maxillary Anterior Teeth Using Palatal TADs and a Clear Appliance
14
Finite element analysis and material sensitivity of Peltier thermoelectric cells coolers
15
Finite element analysis and modeling of structure with bolted joints
16
Finite Element analysis and modelling of Active Fibre Composites including damages
17
Finite element analysis and optimization of a mono parabolic leaf spring using CAE software
18
Finite element analysis and optimization of composite wheelchair wheels
19
Finite Element Analysis and Optimization of Egg-box Energy Absorbing Structures
20
Finite element analysis and optimization of equal channel angular pressing for producing ultra-fine grained materials
21
Finite Element Analysis and Optimization of Steel Girders with External Prestressing
22
Finite element analysis and physiologic testing of a novel, inset glenoid fixation technique
23
Finite element analysis and ray tracing modeling of petroleum migration
24
Finite element analysis and redesign of a compressor hub spinner
25
Finite element analysis and simulation of quenching and other heat treatment processes: A bibliography (1976–2001)
26
Finite element analysis and verification of laser marking on eggshell
27
Finite element analysis considering fracture strain of sheath material and die lubricant in extrusion process of Al/Cu clad composites and its experimental investigation
28
Finite element analysis considering fracture strain of sheath material and die lubricant in extrusion process of Al/Cu clad composites and its experimental investigation
29
Finite element analysis considering fracture strain of sheath material and die lubricant in extrusion process of Al/Cu clad composites and its experimental investigation
30
Finite element analysis for a nonlinear diffusion model in image processing Original Research Article
31
Finite element analysis for acoustic characteristics of combustion stabilization devices
32
Finite element analysis for adhesive failure of progressive cavity pump with stator of even thickness
33
Finite element analysis for buckling of two-layer composite beams using Reddy’s higher order beam theory
34
Finite element analysis for bursting failure prediction in bulge forming of a seamed tube
35
Finite Element Analysis for CFST Columns under Blast Loading
36
Finite element analysis for conical indentation unloading of elastoplastic materials with strain hardening Original Research Article
37
Finite element analysis for cooling of a vertical composite plate
38
Finite element analysis for damage monitoring of glass fiber epoxy composites via the piezoelectric method
39
Finite element analysis for deformation behavior of an aluminum alloy composite containing SiC particles and porosities during ECAP
40
Finite element analysis for deformation behavior of an aluminum alloy composite containing SiC particles and porosities during ECAP
41
Finite element analysis for fracture behavior of cracked beam-columns
42
Finite element analysis for grinding and lapping of wire-sawn silicon wafers
43
Finite element analysis for large displacement J-integral test method for Mode I interlaminar fracture in composite materials
44
Finite element analysis for microscale heat equation with Neumann boundary conditions
45
Finite Element Analysis for Oil Palm Fruit Using Open-Ended Coaxial Sensor
46
Finite element analysis for optimal design of foundations due to dynamic loading
47
Finite element analysis for parametrized nonlinear equations around turning points
48
Finite element analysis for short term O-ring relaxation
49
Finite element analysis for steady-state hydride-induced fracture in metals by composite model
50
Finite element analysis for stress concentration and deflection in isotropic, orthotropic and laminated composite plates with central circular hole under transverse static loading
51
Finite element analysis for surface diffusion-controlled shape instabilities of plate-like grains
52
Finite element analysis for the axisymmetric Laplace operator on polygonal domains
53
Finite element analysis for the evaluation of the structural behaviour, of a prosthesis for trans-tibial amputees
54
Finite element analysis for the lamination process of a precision motor core using progressive stacking dies
55
Finite element analysis for the mechanical features of resistance spot welding process
56
Finite element analysis for the semi-solid state forming of aluminium alloy considering induction heating
57
Finite element analysis for the wear of Ti–N coated punch in the piercing process
58
Finite element analysis for uniaxial time-dependent ratcheting of SiCP/6061Al composites at room and high temperatures
59
Finite element analysis in 3-D models of equine cheek teeth
60
Finite element analysis in professional practice Original Research Article
61
Finite element analysis in situ
62
Finite element analysis model to simulate the behavior of luting cements during setting
63
Finite element analysis modeling of ingot refusal conditions during the rolling process
64
Finite Element Analysis of 100 t Hot Metal Ladle in Process of Tipping Original Research Article
65
Finite element analysis of 3D braided composites based on three unit-cells models
66
Finite Element Analysis of 3-D Electromagnetic Field in Bloom Continuous Casting Mold Original Research Article
67
Finite element analysis of a ‘smart’ damper for seismic structural control
68
Finite element analysis of a barb test for thermal barrier coating delamination toughness measurement
69
Finite element analysis of a bone healing model: 1-year follow-up after internal fixation surgery for femoral fracture
70
Finite element analysis of a center crack specimen warm pre-stressed under different modes of loading
71
Finite element analysis of a coating architecture for glass-molding dies
72
Finite element analysis of a compressible dynamic viscoelastic sphere using FFT
73
Finite element analysis of a coupling eigenvalue problem on overlapping domains
74
Finite element analysis of a cylindrical silo shell under unsymmetrical pressure distributions
75
Finite Element Analysis of a Deep-seated Slope Deformation
76
Finite element analysis of a femoral retrograde intramedullary nail subject to gait loading
77
Finite element analysis of a flat plate solar collector
78
Finite element analysis of a four-unit all-ceramic fixed partial denture
79
Finite element analysis of a glass fibre reinforced composite endodontic post
80
Finite element analysis of a new customized composite post system for endodontically treated teeth
81
Finite Element Analysis of a New Specimen for Conducting Fracture Tests under Mixed Mode I/III Loading
82
Finite element analysis of a notch root semi-elliptical crack in single crystal superalloy
83
Finite element analysis of a novel design approach to resisting total hip dislocation
84
Finite element analysis of a novel pin-sleeve system for external fixation of distal limb fractures in horses
85
Finite element analysis of a pilot gas storage in rock cavern under high pressure
86
Finite element analysis of a projection-based stabilization method for the Darcy–Brinkman equations in double-diffusive convection
87
Finite element analysis of a rigid beam to column connection reinforced with channels
88
Finite Element Analysis of a Sandwich Friction Experiment Model of Rocks
89
Finite Element analysis of a shape memory alloy actuator for a micropump
90
Finite element analysis of a single-phase grid-connected induction generator with the Steinmetz connection
91
Finite element analysis of a tailored blanks stamping process
92
Finite element analysis of a thermoplastic elastomer melt flow in the metering region of a single screw extruder
93
Finite element analysis of a total ankle replacement during the stance phase of gait
94
Finite element analysis of advanced multilayer capacitors
95
Finite element analysis of air supported membrane structures Original Research Article
96
Finite element analysis of aircraft tyre – Effect of model complexity on tyre performance characteristics
97
Finite element analysis of AISI 304 steel sheets subjected to dynamic tension: The effects of martensitic transformation and plastic strain development on flow localization
98
Finite element analysis of an adhesively bonded AlCFRP square section under axial oblique loading
99
Finite Element Analysis of an Adhesively Bonded Single Lap Joint
100
Finite element analysis of an array of cylindrical rods or rectangular bars between ground planes
101
FINITE ELEMENT ANALYSIS OF AN ELASTIC BEAM STRUCTURE SUBJECTED TO A MOVING DISTRIBUTED MASS TRAIN
102
Finite element analysis of an inelastic interface in ultrasonic welded metal/fibre-reinforced polymer joints
103
Finite Element Analysis of Anterior Talofibular Ligament under Different Strategies of Landing
104
Finite element analysis of anti-spallation thermal barrier coatings
105
Finite element analysis of arches undergoing large rotations — I: Theoretical comparison
106
Finite element analysis of arches undergoing large rotations — II: Classification
107
Finite element analysis of automotive cushion discs
108
Finite Element Analysis of Automotive Disc Brake and Pad in Frictional Model Contact
109
Finite element analysis of auxetic obstacle deformation and fluid flow in a channel
110
Finite element analysis of auxetic plate deformation
111
Finite element analysis of base isolated buildings subjected to earthquake loads
112
Finite Element Analysis of Beam – Column Joints Reinforced with GFRP Reinforcements
113
Finite element analysis of beam structures based on trigonometric wavelet
114
Finite element analysis of beam-column T-joints of rectangular hollow steel sections strengthened using through-wall bolts
115
Finite element analysis of beam-to-column joints in steel frames under cyclic loading
116
Finite element analysis of bending occurring while cutting with high speed steel lathe cutting tools
117
Finite element analysis of bi-material interface notch crack behaviour
118
Finite element analysis of blood flow characteristics in a Ventricular Assist Device (VAD)
119
Finite element analysis of bolted connections for PFRP composites
120
Finite element analysis of bonded insulated rail joints
121
Finite element analysis of bonded model Class I ‘restorations’ after shrinkage
122
Finite element analysis of broken fiber effects on the performance of active fiber composites
123
Finite element analysis of bubbly flow around an oscillating square-section cylinder
124
Finite Element Analysis of Buckling of Thin Cylindrical Shell Subjected to Uniform External Pressure
125
Finite element analysis of burst pressure of composite hydrogen storage vessels
126
Finite element analysis of carbon nanotube/cement composite with degraded bond strength
127
Finite Element Analysis of Cardiac Myocyte Debonding and Reorientation During Cyclic Substrate Stretch Experiments
128
Finite Element Analysis of Cell Killing Probability in Electroporation with Single Bipolar Electrode
129
Finite element analysis of circumferential crack behavior in cement–femoral prosthesis interface
130
Finite element analysis of closed-cell aluminium foam under quasi-static loading
131
Finite element analysis of CNTs based on nonlocal elasticity and Timoshenko beam theory including thermal effect
132
Finite element analysis of combined heat and mass transfer in hydromagnetic micropolar flow along a stretching sheet
133
Finite element analysis of composite high-pressure hydrogen storage vessels
134
Finite Element Analysis of Composite Natural Gas Storage Vessels
135
Finite element analysis of composite plates with an application to the paper cockling problem
136
Finite element analysis of composite pressure vessels with a load sharing metallic liner
137
Finite element analysis of compressible viscoplasticity using a three-field formulation: Application to metal powder hot compaction Original Research Article
138
Finite element analysis of compressive deformation of bulk metallic glasses Original Research Article
139
Finite Element Analysis of Concrete Beam under Flexural Stresses Using MesoScale Model
140
Finite Element Analysis of Concrete Bridge Slabs Reinforced with Fiber Reinforced Polymer Bars
141
Finite Element Analysis of Concrete Structures Using Plastic Damage Model in 3 D Implementation
142
Finite Element Analysis of Concrete Structures Using Plastic Damage Model in 3 D Implementation
143
Finite element analysis of conjugate natural convection in a square enclosure with a conducting vertical wall Original Research Article
144
Finite element analysis of convection dominated reaction–diffusion problems Original Research Article
145
Finite element analysis of copper–Nb3Sn contact performance under transverse compression
146
Finite element analysis of corner point displacements and stress intensity factors for narrow notches in square sheets and plates
147
Finite element analysis of covered microstents
148
Finite element analysis of crack closure in two-dimensional bodies subjected to heating
149
Finite element analysis of crack perpendicular to bi-material interface: Case of couple ceramic–metal
150
Finite element analysis of crack propagation and fracture mechanical properties of freestanding 8 wt.% Y2O3–ZrO2 coatings
151
Finite element analysis of cracking and delamination of concrete beam due to steel corrosion
152
Finite element analysis of cracks in piezoelectric materials taking into account the permittivity of the crack medium
153
Finite element analysis of cross wedge rolling
154
Finite element analysis of curved steel girders with tubular flanges
155
Finite element analysis of cutting tools prior to fracture in hard turning operations
156
Finite element analysis of cylindrical shells partially buried in elastic foundations
157
Finite element analysis of damage evolution and the prediction of the limiting draw ratio in textured aluminum sheets
158
Finite element analysis of damage evolution in Al/SiC composite laminates under cyclic thermomechanical loadings
159
Finite element analysis of damaged woven fabric composite materials
160
Finite element analysis of damaged woven fabric composite materials
161
Finite element analysis of deep indentation by a spherical indenter
162
Finite element analysis of deepwater conductor bearing capacity to analyze the subsea wellhead stability with consideration of contact interface models between pile and soil
163
Finite element analysis of deformation and fracture of an exploded gas cylinder
164
Finite element analysis of deformation behavior in continuous ECAP process
165
Finite element analysis of deformation behavior of Aluminium–Copper alloys
166
Finite element analysis of deformation behaviour of metals during equal channel multi-angular pressing
167
Finite element analysis of deformation behaviour of metals during equal channel multi-angular pressing
168
Finite element analysis of depth effect on measuring elastic modulus of a core-shell structure for application of instrumented indentation in tooth enamel
169
Finite Element Analysis of Die Geometry and Process Conditions Effects on Equal Channel Angular Extrusion for β-Titanium Alloy Original Research Article
170
Finite element analysis of die wear in hot forging processes
171
Finite Element Analysis of Different Hip Implant Designs along with Femur under Static Loading Conditions
172
Finite element analysis of diffuse instability using an implicitly integrated pressure–density dependent elastoplastic model
173
Finite element analysis of dual hydroforming processes
174
Finite element analysis of dynamic crack propagation using remeshing technique
175
Finite element analysis of dynamic response of wrinkling membranes Original Research Article
176
Finite element analysis of effect of concrete confinement on behavior of shear walls
177
Finite element analysis of effect of precipitate aspect ratio on accommodation energies during solid state transformations
178
Finite element analysis of effect of precipitate aspect ratio on accommodation energies during solid state transformations
179
Finite element analysis of effect of triaxial state of stress on creep cavitation and rupture behaviour of 2.25Cr–1Mo steel
180
Finite element analysis of effect of triaxial state of stress on creep cavitation and rupture behaviour of 2.25Cr–1Mo steel
181
Finite element analysis of effects of parameters on in-plane bending process of strip metal
182
Finite element analysis of elasticplastic solids under Vickers indentation: surface deformation
183
Finite element analysis of elastohydrodynamic circular journal bearing with micropolar lubricants
184
Finite Element Analysis of Elasto-plastic Plate Bending Problems using Transition Rectangular Plate Elements
185
Finite element analysis of electric field around an ice-covered semi-conducting glazed insulator using a form of Kelvin transformation
186
Finite element analysis of electrical machines/motors A bibliography (1994–1996)
187
Finite element analysis of electromagnetic and fluid flow phenomena in rotary electromagnetic stirring of steel
188
Finite element analysis of electromagnetic scattering from a cavity
189
Finite Element Analysis of Elliptical Hollow and Concrete Filled Tube Columns
190
Finite element analysis of end cover separation in RC beams strengthened in flexure with FRP
191
Finite element analysis of equal channel angular pressing of strain rate sensitive metals
192
Finite element analysis of equal channel angular pressing using a round corner die
193
Finite element analysis of equal channel angular pressing using a round corner die
194
Finite element analysis of equine incisor teeth. Part 1: Determination of the material parameters of the periodontal ligament
195
Finite element analysis of equine incisor teeth. Part 2: Investigation of stresses and strain energy densities in the periodontal ligament and surrounding bone during tooth movement
196
Finite element analysis of evaporative cutting with a moving high energy pulsed laser
197
Finite element analysis of expanded polystyrene foam under multiple compressive loading and unloading
198
Finite element analysis of failure response behavior of anchor bolts in concrete Original Research Article
199
Finite element analysis of fatigue crack growth with interspersed mode I and mixed mode overloads
200
Finite Element Analysis of Fault Bend Influence on Stick-Slip Instability along an Intra-Plate Fault
201
Finite element analysis of femoral components paper III – hip joints
202
Finite element analysis of ferrite–austenite diffusion controlled phase transformation
203
Finite element analysis of fibre suspension flows Original Research Article
204
Finite Element Analysis of Finite Strain Elastoplastic Contact-Impact Problems
205
Finite element analysis of fir-tree region in turbine discs
206
Finite element analysis of flexible multibody systems with fuzzy parameters Original Research Article
207
FINITE ELEMENT ANALYSIS OF FLEXURAL VIBRATIONS IN HARD DISK DRIVE SPINDLE SYSTEMS
208
Finite element analysis of flow in a hydraulic pressure valve
209
Finite element analysis of flows in secondary settling tanks
210
Finite Element Analysis of Fluid Flow through a Porous Scaffold in a Perfusion Bioreactor
211
Finite element analysis of fluid—solid interaction in the metering nip of a metering size press Original Research Article
212
Finite element analysis of forces of plane cutting of cortical bone
213
Finite element analysis of forward osmosis process using NaCl solutions
214
Finite element analysis of free edge stresses in non-linear viscoelastic composites under uniaxial extension, bending and twisting loadings
215
Finite element analysis of free vibration and wave propagation in asymmetric composite beams with structural discontinuities
216
Finite element analysis of free-edge stresses in composite laminates under mechanical an thermal loading
217
Finite element analysis of fretting crack propagation
218
Finite element analysis of fretting fatigue behavior of steel wires and crack initiation characteristics
219
Finite element analysis of frictional contact of elastic solids with thin and moderately thick coatings
220
Finite Element Analysis of Frictional Contact Problem During the Process of Metal Working
221
FINITE ELEMENT ANALYSIS OF FRICTIONALLY EXCITED THERMOELASTIC INSTABILITY
222
Finite element analysis of frp strengthened RC beams using ansys
223
Finite Element Analysis of Fully Developed Free Convection Flow Heat and Mass Transfer of a MHD / Micropolar Fluid over a Vertical Channel
224
Finite Element Analysis of Functionally Graded Piezoelectric Beams
225
Finite element analysis of functionally graded nano-scale films
226
Finite element analysis of functionally graded plates under transverse load
227
Finite Element Analysis of Functionally Graded Skew Plates in Thermal Environment based on the New Third-order Shear Deformation Theory
228
Finite element analysis of geometrically non-linear structures using translational variables
229
Finite element analysis of grain-by-grain deformation by crystal plasticity with couple stress Review Article
230
Finite element analysis of GTAW arc under different shielding gases
231
Finite element analysis of head–neck kinematics during motor vehicle accidents: Analysis in multiple planes
232
Finite Element Analysis of Heat Flow and Temperature Distribution Inside Cutting Tool
233
Finite element analysis of heat transfer and mineralization in layered hydrothermal systems with upward throughflow Original Research Article
234
Finite element analysis of high pressure torsion processing
235
Finite element analysis of high strain rate superplastic forming (SPF) of Al–Ti alloys
236
Finite element analysis of hip stem designs
237
Finite element analysis of hoisting rope and fretting wear evolution and fatigue life estimation of steel wires
238
Finite element analysis of hot forging with flow softening by dynamic recrystallization
239
Finite Element Analysis of Human Body Thorax Subjected to the Ballistic Impact of Projectile
240
Finite element analysis of human knee joint in varus-valgus
241
Finite element analysis of hydromagnetic flow and heat transfer of a heat generation fluid over a surface embedded in a non-Darcian porous medium in the presence of chemical reaction
242
Finite element analysis of impact damage response of composite motorcycle safety helmets
243
Finite element analysis of indentation of aluminium foam and sandwich panels with aluminium foam core
244
Finite element analysis of inelastic laminated plates using a global–local formulation with delamination
245
Finite element analysis of ink-tack delamination of paperboard
246
Finite element analysis of interacting Vickers indentations on brittle materials Original Research Article
247
Finite element analysis of interaction of tornados with a low-rise timber building
248
Finite element analysis of interface delamination and buckling in thin film systems by wedge indentation
249
Finite element analysis of interfacial crack behaviour in cemented total hip arthroplasty
250
Finite element analysis of interfacial crack propagation based on local shear, part II—Fracture
251
Finite element analysis of interfacial crack propagation based on local shear, part I—Near tip deformation
252
Finite element analysis of interfacial stresses in FRP–RC hybrid beams
253
Finite element analysis of interlocking mortarless hollow block masonry prism
254
Finite element analysis of internal winding faults in distribution transformers
255
Finite Element Analysis of IPS Empress II Ceramic Bridge Reinforced by Zirconia Bar.
256
Finite element analysis of ISO tank containers
257
Finite element analysis of laminar and turbulent flows using LES and subgrid-scale models
258
Finite element analysis of laminar flow in a vertical channel with fin array
259
Finite element analysis of laminated composite and sandwich shells using higher order zigzag theory
260
Finite element analysis of laminated composite stiffened plates using FSDT and HSDT: A comparative perspective
261
Finite element analysis of laminated composite structures containing distributed piezoelectric actuators and sensors
262
Finite element analysis of laser tube bending process
263
Finite element analysis of laterally loaded fin piles
264
Finite element analysis of lead-free surface mount devices
265
Finite element analysis of limit strains in biaxial stretching of sheet metals allowing for ductile fracture
266
Finite element analysis of limit strains in biaxial stretching of sheet metals allowing for ductile fracture
267
Finite element analysis of limit strains in biaxial stretching of sheet metals allowing for ductile fracture
268
Finite Element Analysis of Load Bearing Capacity of a Reinforced Concrete Frame Subjected to Cyclic Loading
269
Finite element analysis of localization in FCC polycrystalline sheets under plane stress tension
270
Finite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
271
Finite element analysis of low-velocity impact damage in composite laminated plates
272
Finite element analysis of low-velocity impact on composite sandwich plates
273
Finite Element Analysis of Magnetic Field Distribution for 500-kV Power Transmission Systems
274
Finite element analysis of mechanical properties in discontinuously reinforced metal matrix composites with ultrafine micro structure
275
Finite element analysis of mechanical properties in discontinuously reinforced metal matrix composites with ultrafine micro structure
276
Finite element analysis of mechanical properties of 3D five-directional braided composites
277
Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates
278
Finite element analysis of melt spun yarn
279
Finite element analysis of membrane wrinkling
280
Finite element analysis of microimprinting of bulk metallic glasses in supercooled liquid regime
281
Finite element analysis of micro-rolling using grain and grain boundary elements
282
Finite element analysis of microwave heating of potato––transient temperature profiles Original Research Article
283
Finite element analysis of microwave heating of solid products
284
Finite element analysis of moisture distribution and hygrothermal stresses in TSOP IC packages
285
Finite element analysis of moment-rotation relationships for human cervical spine
286
Finite element analysis of multi-hole extrusion of aluminum-alloy tubes
287
Finite element analysis of multi-stage deep drawing process for high-precision rectangular case with extreme aspect ratio
288
Finite element analysis of nanostructures with roughness and scratches
289
Finite element analysis of nanostructures with roughness and scratches
290
Finite element analysis of nanostructures with roughness and scratches
291
Finite element analysis of natural convection flow in a isosceles triangular enclosure due to uniform and non-uniform heating at the side walls
292
Finite element analysis of new composite floors having cold-formed steel and concrete slab
293
Finite element analysis of non linear coupled oscillator
294
Finite element analysis of nondashlinear axisymmetric vibration of orthotropic annular plates
295
Finite element analysis of non-isothermal multiphase geomaterials with application to strain localization simulation
296
Finite Element Analysis of Nonlinear Fully Coupled Thermoelectric Materials
297
Finite element analysis of nonlinear orthotropic hyperelastic membranes
298
Finite element analysis of nonlinear shell structures with uncertain material property
299
Finite element analysis of non-local effects in ductile fracture
300
Finite element analysis of nonsmooth contact Original Research Article
301
Finite element analysis of notched bar skeletal point stresses and dimension changes due to creep
302
Finite element analysis of orifice-compensated multiple hole-entry worn hybrid journal bearing
303
Finite element analysis of out-of-plane compressive properties of a honeycomb structures with hexagonal topology fabricated by the kirigami technique
304
Finite element analysis of oxidation induced metal depletion at oxide–metal interface
305
Finite element analysis of particle motion in steady inspiratory airflow Original Research Article
306
Finite element analysis of partly wrinkled reinforced prestressed membranes
307
Finite element analysis of peak stresses developed during indentation of ceramic coated steels
308
Finite Element Analysis of Permanent Magnet Synchronous Motors Subjected to Symmetrical Voltage Sags
309
Finite element analysis of pharmaceutical tablet compaction using a density dependent material plasticity model
310
Finite Element Analysis of Phase Distribution in Forging of the Two-Phase Ti-6Al-4V Alloy to have a Hip Joint Implant
311
Finite element analysis of piezoceramic components taking into account ferroelectric hysteresis behavior
312
Finite element analysis of piezoelectric actuator with PMN–PT single crystals for nanopositioning
313
Finite element analysis of piezoelectric corner configurations and cracks accounting for different electrical permeabilities
314
Finite element analysis of pin-loaded composite laminates by connecting independently modeled subdomains
315
Finite element analysis of plantar fascia under stretch—The relative contribution of windlass mechanism and Achilles tendon force
316
Finite element analysis of plastic deformation behavior during high pressure torsion processing
317
Finite element analysis of plastic deformation in twist extrusion
318
Finite element analysis of plastic deformation of CP-Ti by multi-pass equal channel angular extrusion at medium hot-working temperature
319
Finite element analysis of plastic failure in heat-affected zone of welded aluminium connections
320
Finite element analysis of plasticity-induced fatigue crack closure: an overview
321
Finite element analysis of polymer composites filled by interphase coated particles
322
Finite element analysis of polymeric membrane and coating formation by solvent evaporation
323
Finite element analysis of poro-elastic consolidation in porous media: Standard and mixed approaches Original Research Article
324
Finite element analysis of postbuckling and delamination of composite laminates using virtual crack closure technique
325
Finite element analysis of post-buckling dynamics in plates. Part II: A non-stationary analysis
326
Finite element analysis of post-buckling dynamics in plates—Part I: An asymptotic approach
327
Finite element analysis of post-weld shift during fiber pigtail of 980 nm pump lasers
328
Finite element analysis of pressure vessel using beam on elastic foundation analysis
329
Finite element analysis of prestressed structural membranes
330
Finite element analysis of projectile size and shape effects on the probabilistic penetration response of high strength fabrics
331
Finite element analysis of pseudoelastic behavior of NiTi shape memory alloy with thin-wall tube under extension-torsion loading
332
Finite Element Analysis of Pulsatile Blood Flow in Elastic Artery
333
Finite element analysis of punch height effect on V-bending angle
334
Finite element analysis of quasistatic crack propagation in brittle media with voids or inclusions
335
Finite Element Analysis of Radiation and Mass Transfer Flow Past Semi- Infinite Moving Vertical Plate with Viscous Dissipation
336
Finite Element Analysis of RC Beams Strengthened with FRP Sheets under Bending
337
Finite Element Analysis of Reinforced Concrete Deep Beams under Fatigue Loading
338
Finite Element Analysis of Reinforced RC Bracket Using CFRP Plates
339
Finite element analysis of residual thermal stress in ceramic-lined composite pipe prepared by centrifugal-SHS
340
Finite element analysis of residual-stress-induced flatness deviation in banded carbon seals
341
Finite element analysis of resonant sloshing response in 2-D baffled tank
342
Finite element analysis of reticulated ceramics under compression Original Research Article
343
Finite element analysis of rotary-die equal channel angular pressing
344
Finite element analysis of rubber extrusion forming process for automobile weather strip
345
Finite element analysis of Saint–Venant torsion problem with exact integration of the elastic–plastic constitutive equations Original Research Article
346
Finite Element Analysis of Seismic Hazard in Post-mining Environments of Closed Underground Hard Rock Mines
347
Finite element analysis of severe deformation in Mg–3Al–1Zn sheets through differential-speed rolling with a high speed ratio
348
Finite element analysis of shear punch testing and experimental validation
349
Finite element analysis of sheet Hydromechanical forming of circular cup
350
Finite Element Analysis of sheet metal bending process to predict the springback
351
Finite element analysis of shot-peening effect on fretting fatigue parameters
352
Finite element analysis of side branch access during bifurcation stenting
353
Finite element analysis of single impacts of angular particles on ductile targets
354
Finite element analysis of single-fiber push-out tests of continuous Al2O3 fiber-reinforced NiAl composites
355
Finite Element Analysis of Single-lap Adhesive Joints with Tapered Adherends
356
Finite element analysis of single-particle impact in abrasive water jet machining
357
Finite element analysis of single-walled carbon nanotubes based on a rod model including in-plane cross-sectional deformation
358
Finite element analysis of sintering deformation using densification data instead of a constitutive law
359
Finite element analysis of slope failure in Ouenza open-pit iron mine, NE Algeria: causes and lessons for stability control
360
Finite Element Analysis of Small-scale Head of Combine Harvester for Harvesting Fine-Grain Products
361
Finite element analysis of smart functionally graded plates
362
Finite Element Analysis of Smart Structures with Piezoelectric Sensors/Actuators Including Debonding
363
Finite element analysis of smooth, folded and multi-shell structures Original Research Article
364
Finite Element Analysis of Soft-lined Mandibular Complete Denture and its Supporting Structures
365
Finite element analysis of solidification using object-oriented and parallel techniques
366
Finite element analysis of springback in bending of aluminium sheets
367
Finite element analysis of springback in L-bending of sheet metal
368
Finite element analysis of spring-back of V-bending sheet metal forming processes
369
Finite Element Analysis of Square RC Columns Confined by Different Configurations of Transverse Reinforcement
370
Finite element analysis of static problems for elastic media with voids
371
Finite element analysis of steel beam to column connections subjected to blast loads
372
Finite element analysis of steel fiber-reinforced concrete (SFRC): validation of experimental tensile capacity of dog-bone specimens
373
Finite element analysis of steel members under cyclic loading
374
Finite element analysis of steel rolling processes
375
Finite element analysis of strain conditions after equal channel angular extrusion
376
Finite element analysis of stress distribution and the effects of geometry in a laser-Tgenerated single-stage ceramic tile grout seal using ANSYS
377
Finite element analysis of stress distribution around short and long implants in mandibular overdenture treatment
378
Finite element analysis of stress distribution in thermal barrier coatings
379
Finite element analysis of stress distribution on bituminous pavement and failure mechanism
380
Finite Element Analysis of Stress in Bone and Abutment-Implant Interface under Static and Cyclic Loadings
381
Finite element analysis of stress in contacting zone of film and substrate
382
Finite element analysis of stresses and deformations occurring in the spent nuclear fuel (SNF) disposal canister deposited in a deep geological repository
383
Finite element analysis of stresses associated with transformations in magnesia partially stabilized zirconia
384
Finite element analysis of stresses associated with transformations in magnesia partially stabilized zirconia
385
Finite element analysis of stresses developed in the blood sac of a left ventricular assist device
386
Finite element analysis of superelastic, large deformation behavior of shape memory alloy helical springs
387
Finite element analysis of tailor-welded blanks
388
Finite element analysis of temperature field, microstructure and residual stress in multi-pass butt-welded 2.25Cr–1Mo steel pipes
389
Finite element analysis of temperature rise in CP–Ti during equal channel angular extrusion
390
Finite element analysis of temperature rise in metal cutting processes
391
Finite element analysis of temperature-induced deflection of vacuum glazing
392
Finite element analysis of tensile testing with emphasis on necking
393
Finite element analysis of textile composite preform stamping
394
Finite element analysis of textured surfaces under reciprocating sliding
395
Finite element analysis of the behaviour of crack emanating from microvoid in cement of reconstructed acetabulum
396
Finite element analysis of the behaviour of microvoids in the cement mantle of cemented hip stem: Static and dynamic analysis
397
Finite element analysis of the cervical spine: a material property sensitivity study
398
Finite element analysis of the cervico-trochanteric stemless femoral prosthesis
399
Finite element analysis of the combined extrusion of semi-solid material and its experimental verification
400
Finite element analysis of the contact forces between a viscoelastic sphere and rigid plane
401
Finite Element Analysis of the Crack Propagation for Solid Materials
402
Finite element analysis of the deep drawing process using variational inequalities
403
Finite element analysis of the deformation of deep veins in the lower limb under external compression
404
Finite element analysis of the dental implant using a topology optimization method
405
Finite element analysis of the dynamic response of clamped sandwich beams subject to shock loading
406
Finite element analysis of the dynamic response of cylindrical panels under traversing loads
407
Finite element analysis of the dynamic response of plates under traversing loads using adaptive meshes
408
Finite element analysis of the effect of back pressure during equal channel angular pressing
409
Finite element analysis of the effect of blanked edge quality upon stretch flanging of AHSS
410
Finite element analysis of the effect of coefficient of friction on the drawability
411
Finite Element Analysis of the Effect of Fin Geometry on Thermal Performance of Heat Sinks in Microelectronics
412
Finite element analysis of the effect of framework materials at the bone–implant interface in the all‑on‑four implant system
413
Finite element analysis of the effect of interfacial roughness and adhesion strength on the local delamination of hard coating under sliding contact
414
Finite element analysis of the effect of meniscal tears and meniscectomies on human knee biomechanics
415
Finite Element Analysis of the Effect of Proximal Contour of Class II Composite Restorations on Stress Distribution
416
Finite element analysis of the effect of sequential cuts and tool–chip friction on residual stresses in a machined layer
417
Finite element analysis of the effect of sequential cuts and tool–chip friction on residual stresses in a machined layer
418
Finite element analysis of the effect of sequential cuts and tool–chip friction on residual stresses in a machined layer
419
Finite element analysis of the effect of silver content for Sn–Ag–Cu alloy compositions on thermal cycling reliability of solder die attach
420
Finite element analysis of the effect of superstructure materials and loading angle on stress distribution around the implant
421
Finite element analysis of the effect of the inner corner angle in equal channel angular pressing
422
Finite element analysis of the effect of volume shrinkage during laser densification
423
Finite element analysis of the effect of volume shrinkage during laser densification Original Research Article
424
Finite element analysis of the effect of welding heat input and layer number on residual stress in repair welds for a stainless steel clad plate
425
Finite element analysis of the effects of comers on residual stresses in protective oxide scales
426
Finite element analysis of the effects of comers on residual stresses in protective oxide scales
427
Finite element analysis of the effects of martensitic phase transformation in TRIP steel sheet forming
428
Finite element analysis of the effects of martensitic phase transformation in TRIP steel sheet forming
429
Finite element analysis of the effects of martensitic phase transformation in TRIP steel sheet forming
430
Finite element analysis of the effects of radial expansion of corroded reinforcement
431
Finite element analysis of the elastic static properties and stability of pretensioned cylindrical reticulated mega-structures
432
Finite element analysis of the fatigue crack growth rate in transformation toughening ceramics
433
Finite element analysis of the fatigue strength of copper power conductors exposed to tension and bending loads
434
Finite element analysis of the formability of an austenitic stainless steel sheet in warm deep drawing
435
Finite element analysis of the free surface effects on the mechanical behavior of thin nickel polycrystals
436
Finite element analysis of the grain size effect on diffusion in polycrystalline materials
437
Finite element analysis of the hydromechanical deep-drawing process of tapered rectangular boxes
438
Finite Element Analysis of the Impact Behavior of Sandwich Panels with Nanocomposite Face sheet (Epoxy/ Fiberglass/Nanosilica)
439
Finite element analysis of the implantation of a balloon-expandable stent in a stenosed artery
440
Finite element analysis of the implanted proximal tibia: a relationship between the initial cancellous bone stresses and implant migration
441
Finite element analysis of the influence of temperature profile on thermoelasticity of multilayered plates
442
Finite element analysis of the influence of tool edge radius on size effect in orthogonal micro-cutting process
443
Finite element analysis of the influence of tool edge radius on size effect in orthogonal micro-cutting process
444
Finite element analysis of the in-plane shear behaviour of masonry panels confined with reinforced grouted cores
445
Finite element analysis of the localised thermal quench of an HTS tape Original Research Article
446
Finite element analysis of the lumbar spine with a new cage using a topology optimization method
447
Finite element analysis of the magnetic tape slitting process
448
Finite element analysis of the mechanical behavior of a scapula implanted with a glenoid prosthesis
449
Finite element analysis of the mechanical properties of cellular aluminium based on micro-computed tomography
450
Finite Element Analysis of the Mechanism of Traumatic Aortic Rupture (TAR)
451
Finite element analysis of the middle ear transfer functions and related pathologies
452
Finite Element Analysis of the Non-Equal Channel Angular Pressing (NECAP) with Different Die Geometries
453
Finite element analysis of the orthogonal metal cutting process
454
Finite element analysis of the penetrations of shear and normal vibrations into the soft tissues in a fingertip
455
Finite element analysis of the piezocone test in cohesive soils using an elastoplastic–viscoplastic model and updated Lagrangian formulation
456
Finite element analysis of the piezoelectric vibrations of quartz plate resonators with higher-order plate theory
457
Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion
458
Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion
459
Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion
460
Finite element analysis of the prestress wire-winding press
461
FINITE ELEMENT ANALYSIS OF THE PSEUDO-ELASTIC BEHAVIOR OF SHAPE MEMORY ALLOY TRUSS AND BEAM
462
Finite element analysis of the residual stress by cold expansion method under the influence of adjacent holes
463
Finite element analysis of the ring rolling process with integrated closed-loop control
464
Finite element analysis of the rolling friction of a viscous particle on a rigid plane
465
Finite element analysis of the spherical mandrelling process of cylindrical holes
466
Finite element analysis of the spine: Towards a framework of verification, validation and sensitivity analysis
467
FINITE ELEMENT ANALYSIS OF THE STABILITY OF STATIC THERMOELASTIC CONTACT
468
Finite element analysis of the superplastic forming of thick sheet using the incremental flow formulation
469
Finite element analysis of the temporomandibular joint during lateral excursions of the mandible
470
Finite element analysis of the tensile properties of 2.5D braided composites
471
Finite element analysis of the thermal residual stresses of SiC particle reinforced aluminum composite
472
Finite element analysis of the three-point bending of sheet metals
473
Finite element analysis of the vibrations of waveguides and periodic structures
474
Finite element analysis of the vibratory characteristics of cylindrical shells conveying fluid Original Research Article
475
Finite element analysis of the wedge delamination test
476
Finite element analysis of thermal conductivity and thermal resistance behaviour of woven fabric
477
Finite element analysis of thermal shock tests of RF connectors
478
Finite element analysis of thermal stress in magnetron sputtered Ti coating
479
Finite element analysis of thermo-debonding mechanism in dental composites
480
Finite element analysis of thermoelastic contact problem in functionally graded axisymmetric brake disks
481
Finite element analysis of thermo-mechanical loaded teeth
482
Finite element analysis of thermo-mechanical stresses in diesel engines cylinder heads using a two-layer viscoelasticity model
483
Finite element analysis of thermoplastic composite plates in forming temperature
484
Finite element analysis of thin GFRC panels reinforced with FRP
485
Finite element analysis of thin-walled composite two-span wood-based loadbearing stressed skin roof panels and experimental validation
486
Finite element analysis of thixoforming process with arbitrary shape die
487
Finite element analysis of three commonly used external fixation devices for treating Type III pilon fractures
488
Finite element analysis of three dimensional crack growth by the use of a boundary element sub model
489
FINITE ELEMENT ANALYSIS OF THREE-DIMENSIONAL VIBRATIONS OF THICK CIRCULAR AND ANNULAR PLATES
490
Finite element analysis of three-phase induction motors: comparison of two different approaches
491
Finite Element Analysis of Tie Beams under the Effect of Differential Settlement of Isolated Footings
492
Finite element analysis of tile-reinforced composite structural armor subjected to bending loads
493
Finite element analysis of timber containing branches – An approach to model the grain course and the influence on the structural behaviour
494
Finite element analysis of time-dependent semi-infinite wave-guides with high-order boundary treatment
495
Finite Element Analysis of Tissue Conductivity during High-frequency and Lowvoltage Irreversible Electroporation
496
Finite element analysis of tissue differentiation process of a tibia with various fracture configurations when a composite intramedullary rod was applied
497
Finite element analysis of torsional deformation
498
Finite element analysis of torsional deformation
499
Finite element analysis of torsional free vibration of adhesively bonded single-lap joints
500
Finite element analysis of trabecular bone structure: a comparison of image-based meshing techniques
501
Finite element analysis of transient thermoelastic behaviors in disk brakes
502
Finite element analysis of tube hydroforming processes in a rectangular die
503
Finite element analysis of tube inward curling process by conical dies
504
Finite element analysis of two-dimensional electrochemical–mechanical response of ionic conducting polymer–metal composite beams
505
Finite element analysis of ultrasonically assisted turning of Inconel 718
506
Finite element analysis of unbonded square fiber-reinforced elastomeric isolators (FREIs) under lateral loading in different directions
507
Finite element analysis of uniaxial and multiaxial state of stress on creep rupture behaviour of 2.25Cr–1Mo steel
508
Finite element analysis of unicompartmental knee arthroplasty
509
Finite element analysis of various methods for protection of concrete structures against spalling during fire
510
Finite element analysis of vehicle–bridge interaction
511
Finite element analysis of vibrating linear systems with fractional derivative viscoelastic models
512
Finite element analysis of viscoelastic composite structures based on a micromechanical material model
513
Finite element analysis of viscoelastic structures using Rosenbrock-type methods
514
Finite element analysis of void growth behavior in nickel-based single crystal superalloys
515
Finite element analysis of vortex shedding oscillations from cylinders in the straight channel
516
Finite element analysis of V-ribbed belts using neural network based hyperelastic material model
517
Finite element analysis of wall pressure in imperfect silos
518
Finite element analysis of wear for centrifugal slurry pump
519
Finite element analysis of welded beam-to-column joints in aluminium alloy EN AW 6082 T6
520
Finite element analysis of welded beam-to-column joints in aluminium alloy EN AW 6082 T6
521
Finite element analysis of wrinkling membrane structures with large deformations
522
Finite element analysis on 1-3 piezocomposite rings for ultrasonic transducer applications
523
Finite Element Analysis on Behavior of Single Battered Pile in Sandy Soil Under Pullout Loading
524
Finite element analysis on evolution process for damage microcrack healing
525
Finite element analysis on global and local estimation for thermo-mechanical response of EPL wafer heating
526
Finite element analysis on implicitly defined domains: An accurate representation based on arbitrary parametric surfaces
527
Finite element analysis on nanoindentation with friction contact at the film/substrate interface
528
Finite element analysis on process improvement of the multi-forming for the motor-case of an automobile
529
Finite element analysis on tensile behaviour of 3D random fibrous materials: Model description and meso-level approach
530
Finite element analysis on the biomechanical stability of open porous titanium scaffolds for large segmental bone defects under physiological load conditions
531
Finite element analysis on the capacity of circular concrete-filled double-skin steel tubular (CFDST) stub columns
532
Finite element analysis on the coined-bead mechanism during the V-bending process
533
Finite element analysis on the effect of die clearance on shear planes in fine blanking
534
Finite element analysis on the effect of Si phase melting in combustion synthesis of MoSi2
535
Finite element analysis on the effect of Si phase melting in combustion synthesis of MoSi2
536
Finite element analysis on the effect of workpiece geometry on the quenching of ST50 steel
537
Finite element analysis on the formation and distribution of residual stresses during quenching of low carbon bainitic–martensitic large gears
538
Finite element analysis on the Meppen-II-4 Slab Test
539
Finite element analysis on the VTT–IRSN flexural failure test
540
Finite element analysis over tangled simplicial meshes: Theory and implementation
541
Finite element analysis suggests functional bone strain accounts for continuous post-eruptive emergence of teeth
542
Finite Element Analysis to Investigate the Infuence of Delamination Size, Stacking Sequence and Boundary Conditions on the Vibration Behavior of Composite Plate
543
Finite element analysis to predict penetration and perforation of thick FRP laminates struck by projectiles
544
Finite element analysis using interfragmentary strain theory for the fracture healing process to which composite bone plates are applied
545
FINITE ELEMENT ANALYSIS USING MIXED FORCE-DISPLACEMENT METHOD VIA SINGULAR VALUE DECOMPOSITION
546
Finite element analysis when machining UGF-reinforced PMCs plates: Chip formation, crack propagation and induced-damage
547
Finite element analysis with staggered gradient elasticity
548
Finite element analysis with uncertain probabilities
549
Finite element analysis, design and experiment on solid propellant motors with a stress reliever
550
Finite element analysis: A promising tool for the reconstruction of extinct vertebrate graviportal taxa. A preliminary study based on the metacarpal arrangement of Elephas maximus
551
Finite element analysis-based design of a fluid-flow control nano-valve
552
Finite element analysis—theory and application with ANSYS: S. Moaveni Prentice-Hall, Inc., New Jersey, 1999. 527 pps. ISBN 0-13-785098-0
553
Finite element and analytical modelling of crack closure due to repeated overloads Original Research Article
554
Finite element and artificial neural network analysis of ECAP
555
Finite element and asymptotic homogenization methods applied to smart composite materials
556
Finite element and boundary element analyses of beams and thin-wall structures — A bibliography (1994–1995)
557
Finite element and boundary element analyses of microwave, optical and acoustic waveguides A bibliography (1994–1996
558
Finite element and boundary element analysis of bridges, roads and pavements — A bibliography (1994–1997)
559
Finite element and boundary element contact stress analysis with remeshing technique
560
FINITE ELEMENT AND BOUNDARY ELEMENT MODELLING FOR THE ACOUSTIC WAVE TRANSMISSION IN MEAN FLOW MEDIUM
561
Finite element and boundary element modelling of surface engineering systems: A bibliography (1996–1998)
562
Finite element and boundary element simulations of indentation problems : A bibliography (1997–2000)
563
Finite element and boundary element technology in rock and mining mechanics A bibliography (1995–1998)
564
Finite element and coupled finite element/smooth particle hydrodynamics modeling of the quasi-static crushing of empty and foam-filled single, bitubular and constraint hexagonal- and square-packed aluminum tubes
565
Finite Element- and Design of Experiment-Derived Optimization of Screw Configurations and a Locking Plate for Internal Fixation System
566
Finite element and DG analysis for neutral-type Volterra integro-differential equations with weakly singular kernels
567
Finite element and dimensional analysis algorithm for the prediction of mechanical properties of bulk materials and thin films
568
Finite element and experimental analyses of polymer-based dental bridges reinforced by ceramic bars
569
Finite Element and Experimental Investigation on the Effect of Repetitive Shock in Corrugated Cardboard Packaging
570
Finite element and experimental models of cemented hip joint reconstructions can produce similar bone and cement strains in pre-clinical tests
571
Finite element and experimental studies of diametral errors in cantilever bar turning
572
Finite element and experimental studies on single-lap balanced joints in tension
573
Finite element and experimental studies on single-lap balanced joints in tension
574
Finite element and higher order difference formulations for modelling heat transport in magnetised plasmas
575
Finite element and micromechanical modeling for investigating effective material properties of polymer–matrix nanocomposites with microfiber, reinforced by CNT arrays
576
Finite element and neural network models for process optimization in selective laser sintering
577
Finite element and NURBS approximations of eigenvalue, boundary-value, and initial-value problems
578
Finite element and reliability: a method for compound variables—application on a cracked heating system Original Research Article
579
Finite element and stream-tube formulations for flow computations—two-dimensional applications
580
Finite element application in implant research for treatment of lumbar degenerative disc disease
581
Finite element approach for density functional theory calculations on locally-refined meshes
582
Finite element approach for modelling fatigue damage in fibre-reinforced composite materials
583
Finite element approach for simulating the dynamic mechanical behaviour of a chicken egg
584
Finite element approach in the plate bending process
585
Finite element approach to global gyrokinetic Particle-In-Cell simulations using magnetic coordinates Original Research Article
586
Finite element approximation for single-phase multicomponent flows
587
Finite element approximation for some quasilinear elliptic problems
588
Finite element approximation for the viscoelastic fluid motion problem
589
Finite element approximation of a coupled contact Stefan-like problem arising from the time discretization in deformation theory of thermo-plasticity
590
Finite element approximation of a displacement formulation for time-domain elastoacoustic vibrations
591
Finite element approximation of a nonlinear heat conduction problem in anisotropic media Original Research Article
592
Finite element approximation of an evolution problem modeling shear band formation Original Research Article
593
Finite element approximation of convection diffusion problems using graded meshes Original Research Article
594
Finite element approximation of eigenvalue problems
595
Finite element approximation of field dislocation mechanics
596
Finite element approximation of free vibration of folded plates
597
Finite element approximation of Maxwell eigenproblems on curved Lipschitz polyhedral domains
598
Finite element approximation of nematic liquid crystal flows using a saddle-point structure
599
Finite element approximation of piezoelectric plates
600
Finite element approximation of Quasi-3D shallow water equations Original Research Article
601
Finite element approximation of solutions to a class of nonlinear hyperbolic–parabolic equations Original Research Article
602
Finite element approximation of the Cahn–Hilliard equation on surfaces
603
Finite element approximation of the elasticity spectral problem on curved domains
604
Finite element approximation of the hyperbolic wave equation in mixed form Original Research Article
605
Finite Element Approximation of Variational Inequalities: An Algorithmic Approach
606
Finite element approximation of viscoelastic fluid flow using characteristics method Original Research Article
607
Finite element approximation to a contact problem for a nonlinear thermoviscoelastic beam
608
Finite element approximation to a quasi-static thermoelastic problem to the contact of two rods Original Research Article
609
Finite element approximation to nonlinear coupled thermal problem
610
Finite element approximations for a linear fourth-order parabolic SPDE in two and three space dimensions with additive space–time white noise
611
Finite element approximations of nonlinear eigenvalue problems in quantum physics
612
Finite element approximations of stochastic optimal control problems constrained by stochastic elliptic PDEs
613
Finite element assessment of the potential of platelet-filled polymers for membrane gas separations
614
Finite element based bone remodeling and resonance frequency analysis for osseointegration assessment of dental implants
615
Finite element based coupled mode initial post-buckling analysis of a composite cylindrical shell
616
Finite element based design optimization of WENDELSTEIN 7-X divertor components under high heat flux loading
617
Finite Element Based Dynamic Characteristics of Journal Bearing in a New Two-Stroke Linear Generator Engine
618
Finite element based fatigue assessment of corrugated steel web beams in highway bridges
619
Finite element based form-finding algorithm for tensegrity structures
620
Finite element based heatline approach to study mixed convection in a porous square cavity with various wall thermal boundary conditions
621
Finite element based hybrid techniques for advection-diffusion-reaction processes
622
Finite Element Based Life Prediction of a New Free Piston Linear Generator Engine Mounting
623
Finite element based model predictive control for active vibration suppression of a one-link flexible manipulator
624
Finite element based prediction of process-induced deformation of autoclaved composite structures using 2D process analysis and 3D structural analysis
625
Finite element based simulation of fatigue crack growth with a focus on elastic–plastic material behavior
626
FINITE ELEMENT BASED VIBRATION FATIGUE ANALYSIS OF A NEW TWOSTROKE LINEAR GENERATOR ENGINE COMPONENT
627
Finite element bending analysis of oval tubes using rotary draw bender for hydroforming applications
628
Finite element buckling analysis of rotationally periodic laminated composite shells
629
Finite element buckling analysis of stiffened plates with filleted junctions
630
Finite element calculated uniaxial apparent stiffness is a consistent predictor of uniaxial apparent strength in human vertebral cancellous bone tested with different boundary conditions
631
Finite element calculation of 4-step 3-dimensional braided composite under ballistic perforation
632
Finite element calculation of elastodynamic stress field around a notch tip via contour integrals
633
FINITE ELEMENT CALCULATION OF ENERGY RELEASE RATE PRIOR TO CRACK KINKING IN 2-D SOLIDS
634
Finite element calculation of load-biased thermal cycling of shape memory alloy
635
Finite element calculation of stress intensity factors for interface notches
636
Finite element calculations and fabrication of cantilever sensors for nanoscale detection
637
Finite element calculations and fabrication of cantilever sensors for nanoscale detection
638
Finite element calculations on detailed 3D models for the superferric main magnets of the FAIR SIS100 synchrotron Original Research Article
639
Finite element characterisation of photonic devices for optical communications
640
Finite element code for impact collapse problems of framed structures
641
Finite element code-based modeling of a multi-feature isolation system and passive alleviation of possible inner pounding
642
Finite Element Coding of Functionally Graded Beams under Various Boundary and Loading Conditions
643
Finite element cohesive fracture modeling of airport pavements at low temperatures
644
Finite element collocation approximation of the characteristic exponent in BVPs with periodic coefficients
645
Finite element comparative study of ship structural detail
646
Finite element comparison of single and bi-layered tube hydroforming processes
647
Finite element comparison of single, bi-layered and three-layered tube hydroforming processes
648
Finite element computation of absorbing boundary conditions for time-harmonic wave problems
649
Finite element computation of corona around monopolar transmission lines
650
Finite element computation of fatigue growth rates for mode I cracks subjected to welding residual stresses
651
Finite element computation of field and eddy currents of a system consisting of a power transmission line above conductors buried in nonhomogeneous earth
652
Finite element computation of grating scattering matrices and application to photonic crystal band calculations
653
Finite element computation of Greenʹs functions
654
Finite element computation of magnetic field problems with the displacement current
655
Finite element computation of sloshing modes in containers with elastic baffle plates
656
Finite element computation of the vibration modes of a fluid—solid system Original Research Article
657
Finite element computation of the vibrations of a plate-fluid system with interface damping Original Research Article
658
Finite element computation of turbulent flows with the discontinuity-capturing directional dissipation (DCDD)
659
Finite element computation of unsteady viscous compressible flows Original Research Article
660
Finite element computation of unsteady viscous transonic flows past stationary airfoils
661
Finite element computational dynamics of rotating systems
662
Finite element computational dynamics of rotating systems
663
Finite element computational modelling and experimental investigation of perforated NiTi plates under tension
664
Finite element computations of anisotropic continuum damage in reinforced concrete
665
Finite element concepts for finite elastoplastic strains and isotropic stress response in shells: theoretical and computational analysis Original Research Article
666
FINITE ELEMENT CONNECTIVITIES FROM VIBRATION MEASUREMENTS
667
Finite element construction for simulating delamination of sandwich composite plates and masses
668
Finite element contact analysis on a horn-holder assembly for wire bonding
669
Finite element contact stress analysis of the RPD abutment tooth and periodontal ligament
670
Finite element continuum damage modeling of plain weave reinforced composites
671
Finite element crack closure analysis of a compact tension specimen
672
Finite element crack propagation calculation using trial cracks
673
Finite element crack propagation of adhesively bonded repaired panels in general mixed-mode conditions
674
Finite element crash simulations and impact-induced injuries A bibliography (1980-1998)
675
Finite element crash simulations and impact-induced injuries A bibliography (1980-1998)
676
Finite Element Crushing Analysis, Neural Network Modelling and Multi-Objective Optimization of the Honeycomb Energy Absorbers
677
Finite Element Crushing Analysis, Neural Network Modelling and Multi-Objective Optimization of the Honeycomb Energy Absorbers
678
Finite element crystal plasticity analysis of spherical indentation in bulk single crystals and coatings
679
Finite element damage modeling in bending processes
680
Finite element delamination model for vibrating composite spherical shell panels with central cutouts
681
Finite element description of nonlinear viscoelastic behaviour of technical fabric
682
Finite element design and fabrication of Al2O3/TiC/CaF2 gradient self-lubricating ceramic tool material
683
Finite element design of MgO/Ni system functionally graded materials
684
Finite element design of SiC/C functionally graded materials for ablation resistance application
685
Finite element determination of the forces exerted by endotracheal tubes on the upper airways
686
Finite element developments for general fluid flows with structural interactions
687
Finite element discretization by minimization of elastic strain energy method
688
Finite element discretization by minimization of elastic strain energy method
689
Finite element dispersion of cylindrical and spherical acoustic waves Original Research Article
690
Finite element dynamic analysis of anisotropic elastic solids with voids
691
Finite element dynamic analysis of drillstrings
692
Finite element dynamic analysis of geometrically exact planar beams
693
Finite element dynamic analysis of orthotropic cylindrical shells with a constrained damping layer
694
Finite element dynamic analysis of orthotropic sandwich plates with an electrorheological fluid core layer
695
Finite element dynamic analysis of rotating orthotropic sandwich annular plates
696
Finite element dynamic analysis of unsymmetric composite laminated beams with shear effect and rotary inertia under the action of moving loads
697
Finite element dynamic modeling of a translating and rotating flexible link Original Research Article
698
Finite element dynamic stability analysis of laminated composite skew plates containing cutouts based on HSDT
699
Finite element electromagnetic analysis of the jet error field correction coils
700
Finite element error analysis for a projection-based variational multiscale method with nonlinear eddy viscosity
701
Finite element error analysis of a zeroth order approximate deconvolution model based on a mixed formulation
702
Finite element estimates of interface stress in the trans-tibial prosthesis using gap elements are different from those using automated contact
703
Finite element estimation of electrostatic double layer interaction between colloidal particles inside a rough cylindrical capillary: effect of charging behavior
704
Finite element evaluation of mixed mode stress intensity factors in functionally graded materials
705
Finite element evaluation of projectile nose angle effects in ballistic perforation of high strength fabric
706
Finite Element Evaluation of Stress Distribution in Mature and Immature Teeth
707
Finite Element Evaluation of the Effect of Adhesive Creams on the Stress State of Dentures and Oral Mucosa
708
Finite element evaluation of the microbond test: meniscus effect, interphase region, and vise angle
709
Finite element evaluation of the microbond test: meniscus effect, interphase region, and vise angle
710
Finite element failure analysis of reinforced concrete T-girder bridges
711
Finite element fatigue propagation of induced cracks by stiffeners in repaired panels with composite patches
712
Finite element for cylindrical thin shells under harmonic forces
713
Finite element form of FDV for widely varying flowfields
714
Finite element formulae for internal forces of Bernoulli–Euler beams under moving vehicles
715
FINITE ELEMENT FORMULATION AND ACTIVE VIBRATION CONTROL STUDY ON BEAMS USING SMART CONSTRAINED LAYER DAMPING (SCLD) TREATMENT
716
Finite element formulation and shaking table tests of direction-optimized-friction-pendulum system
717
Finite element formulation for a digital image correlation method
718
Finite element formulation for anisotropic coupled piezoelectro-hygro-thermo-viscoelasto-dynamic problems
719
Finite element formulation for convective–diffusive problems with sharp gradients using finite calculus Original Research Article
720
Finite element formulation for cylindrical bending of a transversely compressible sandwich plate, based on assumed transverse strains
721
Finite element formulation for dynamics of delaminated composite beams with piezoelectric actuators
722
Finite element formulation for geometric and material nonlinear analysis of beams prestressed with external slipping tendons
723
Finite element formulation for inflatable beams
724
Finite element formulation for modeling nonlinear viscoelastic elastomers Original Research Article
725
Finite element formulation for modeling particle debonding in reinforced elastomers subjected to finite deformations Original Research Article
726
Finite element formulation for modeling sliding cable elements
727
Finite element formulation for modelling large deformations in elasto-viscoplastic polycrystals
728
Finite Element formulation for nonlinear analysis of masonry walls
729
Finite element formulation for non-smooth oscillations of an elastic beam with a friction device Original Research Article
730
Finite element formulation for the analysis of turbulent wind flow passing bluff structures using the RNG k−ε model
731
Finite element formulation for the free vibration analysis of embedded double-walled carbon nanotubes based on nonlocal Timoshenko beam theory
732
Finite element formulation of 3-D heat transfer problem for orthotropic materials
733
Finite element formulation of a composite double T-beam subjected to torsion
734
Finite element formulation of a generalized higher order shear deformation theory for advanced composite plates
735
Finite element formulation of a heat transfer problem for an axisymmetric composite structure
736
Finite element formulation of a new nonlocal damage model
737
Finite element formulation of a phase field model based on the concept of generalized stresses
738
Finite element formulation of a third order laminated finite rotation shell element
739
Finite element formulation of exact non-reflecting boundary conditions for the time-dependent wave equation
740
Finite element formulation of slender structures with shear deformation based on the Cosserat theory
741
Finite element formulation of smart piezoelectric composite plates coupled with acoustic fluid
742
Finite element formulation of the finite rotation solid element
743
Finite element formulation of the Ogden material model with application to rubber-like shells
744
Finite element formulation of the self-excited forces for time-domain assessment of wind-induced dynamic response and flutter stability limit of cable-supported bridges
745
Finite element formulation of various four unknown shear deformation theories for functionally graded plates
746
Finite element formulation of viscoelastic sandwich beams using fractional derivative operators
747
Finite element formulation with high-order absorbing boundary conditions for time-dependent waves Original Research Article
748
Finite element formulations and theoretical study for variable curvature friction pendulum system
749
Finite element formulations for exterior problems: application to hybrid methods, non-reflecting boundary conditions, and infinite elements
750
Finite element formulations for free vibration analysis of isotropic and orthotropic plates using two-variable re ned plate theory
751
FINITE ELEMENT FORMULATIONS FOR FRICTION PENDULUM SEISMIC ISOLATION BEARINGS
752
Finite element formulations for hyperelastic transversely isotropic biphasic soft tissues Original Research Article
753
Finite element formulations for transient dynamic analysis in structural systems with viscoelastic treatments containing fractional derivative models
754
Finite element formulations of one-dimensional elements with bond-slip
755
Finite element formulations of strain gradient theory for microstructures and the C0-1 patch test
756
Finite element free flexural vibration analysis of arbitrary plates
757
Finite element frequency-domain acoustic analysis of open-cell plastic foams
758
Finite element Galerkin method for the “good” Boussinesq equation Original Research Article
759
Finite Element Geometry Creation Using ThreeDimensional Laser Profilometry
760
Finite Element Geometry Creation Using ThreeDimensional Laser Profilometry
761
Finite element growth analysis for the craniofacial skeleton in patients with cleft lip and palate
762
Finite Element Hodge for spline discrete differential forms. Application to the Vlasov–Poisson system
763
Finite element implementation and numerical issues of strain gradient plasticity with application to metal matrix composites
764
Finite element implementation and validation of wear modelling in sliding polymer–metal contacts
765
Finite element implementation including sensitivity analysis of a simple finite strain viscoelastic constitutive law
766
Finite element implementation of a generalised non-local rate-dependent crystallographic formulation for finite strains
767
Finite element implementation of a generalized friction model: application to an upsetting-sliding test
768
Finite element implementation of a generalized friction model: application to an upsetting-sliding test
769
Finite element implementation of a generalized friction model:: application to an upsetting–sliding test
770
Finite element implementation of a glass tempering model in three dimensions
771
Finite element implementation of a microstructure-based model for filled elastomers
772
Finite element implementation of a new sandwich homogenization procedure
773
Finite element implementation of a stochastic three dimensional finite-strain damage model for fibrous soft tissue Original Research Article
774
Finite element implementation of an eigenfunction solution for the contact pressure variation due to wear
775
Finite element implementation of gradient plasticity models Part I: Gradient-dependent yield functions Original Research Article
776
Finite element implementation of gradient plasticity models Part II: Gradient-dependent evolution equations Original Research Article
777
Finite element implementation of incompressible, transversely isotropic hyperelasticity Original Research Article
778
Finite element implementation of large deformation micropolar plasticity exhibiting isotropic and kinematic hardening effects
779
Finite element implementation of multiaxial continuum damage mechanics for plain and fretting fatigue
780
Finite element implementation of nearly-incompressible rheological models based on multiplicative decompositions
781
Finite element implementation of non-linear elastoplastic constitutive laws using local and global explicit algorithms with automatic error control
782
Finite element implementation of virtual internal bond model for simulating crack behavior
783
Finite Element Instability Analysis of the Steel Joist of Continuous Composite Beams with Flexible Shear Connectors
784
Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues
785
Finite element interval analysis of external loads identified by displacement input with uncertainty Original Research Article
786
Finite element inverse analysis for the design of intermediate dies in multi-stage deep-drawing processes with large aspect ratio
787
Finite element inverse analysis using a photosynthetic algorithm
788
Finite Element Investigation and Optimization of Tool Wear in Drilling Process of Difficult-to-Cut Nickel-Based Superalloy using Response Surface Methodology
789
Finite element investigation of equal channel angular extrusion with back pressure
790
Finite element investigation of multi-phase transformation within carburized carbon steel
791
Finite element investigation of shear failure of lean duplex stainless steel plate girders
792
Finite element investigation of size effects on the mechanical behavior of nickel single crystals
793
Finite element investigation of the flow stress dependence of chip formation
794
Finite Element Investigation of the Fracture Potential of Highly Constrained Details in Steel Plate Members
795
Finite element investigation of the influence of corrosion pattern on inelastic buckling and cyclic response of corroded reinforcing bars
796
Finite element investigation of the influence of material properties on the crushing characteristics of in-plane loaded composite sandwich panels
797
Finite element investigation of the structural behaviour of deck slabs in composite bridges
798
Finite element investigation of the structural response of corroded RC beams
799
Finite element investigation of traffic induced vibrations
800
Finite Element Investigation on Load Carrying Capacity of Corroded RC Beam Based on Bond-Slip
801
Finite element investigation on spring-back characteristics in sheet metal U-bending process
802
Finite element investigation on the structural behaviour of cold-formed steel bolted connections
803
Finite element investigations for the role of transformation plasticity on springback in hot press forming process
804
Finite element investigations of bolt clamping force and friction coefficient effect on the fatigue behavior of aluminum alloy 2024-T3 in double shear lap joint
805
Finite element investigations on the dynamic plastic buckling of a slender beam subject to axial impact
806
Finite element investigations upon the influence of pocket die designs on metal flow in aluminium extrusion: Part I. Effect of pocket angle and volume on metal flow
807
Finite element large deflection static analysis of shallow and deep stiffened shells
808
Finite element large deflection static analysis of shallow and deep stiffened shells
809
Finite element LES and VMS methods on tetrahedral meshes
810
Finite element limit analyses of under-matched tensile specimens
811
Finite element limit analysis of anisotropic structures Original Research Article
812
Finite element limit load analysis of thin-walled structures by ANSYS (implicit), LS-DYNA (explicit) and in combination
813
Finite element limit loads for non-idealized through-wall cracks in thick-walled pipe
814
Finite element lower bound “yield line” analysis of isotropic slabs using rotation-free elements
815
Finite element matrices in congruent subdomains and their effective use for large-scale computations
816
FINITE ELEMENT MATRIX GENERATION ON A GPU
817
Finite element mesh for complex flow simulation
818
Finite element mesh generation over intersecting curved surfaces by tracing of neighbours
819
Finite element mesh update methods for fluid–structure interaction simulations
820
Finite Element Method (FEM) modeling of the powder compaction of cosmetic products: Comparison between simulated and experimental results
821
Finite element method analysis and control stratagem for machining deformation of thin-walled components
822
Finite Element Method Analysis of Compression Fractures on Whole-Spine Models Including the Rib Cage
823
Finite Element Method Analysis of Effect of Blade Clearance on Plate Shearing Process Original Research Article
824
Finite element method analysis on the stress and strain states in amorphous composites containing crystalline copper during compression
825
Finite element method and constitutive modelling and computation for unsaturated soils Original Research Article
826
Finite element method and experimental investigation on the residual stress fields and fatigue performance of cold expansion hole
827
Finite element method assisted stiffness design procedure for non-circular profile composite wastewater pipe linings
828
Finite element method based design and optimisation methodology for piezoelectric ultrasonic motors Original Research Article
829
Finite element method based Monte Carlo filters for structural system identification
830
Finite element method based simulation of stress–strain field in the quenching process
831
Finite element method computations in unbounded domains with nonzero but uniform far field decay
832
Finite element method failure analysis of a pressurized FRP cylinder under transverse impact loading
833
Finite element method for a nonlocal Timoshenko beam model
834
Finite element method for computational fluid dynamics to design photovoltaic thermal (PV/T) system configuration
835
Finite element method for conserved phase fields: Stress-mediated diffusional phase transformation
836
Finite element method for developing arbitrary surfaces to flattened forms
837
Finite element method for elliptic problems with edge singularities
838
Finite element method for epitaxial growth with attachment–detachment kinetics
839
Finite element method for frames with variable characteristics
840
Finite element method for free surface flow problems Original Research Article
841
Finite element method for generalized piezothermoelastic problems
842
FINITE ELEMENT METHOD FOR GRADIENT PLASTICITY AT LARGE STRAINS
843
Finite element method for linear micropolar elasticity and numerical study of some scale effects phenomena in MEMS
844
Finite element method for linear micropolar elasticity and numerical study of some scale effects phenomena in MEMS
845
Finite element method for linear micropolar elasticity and numerical study of some scale effects phenomena in MEMS
846
Finite element method for mixed elastohydrodynamic lubrication of journal-bearing systems
847
Finite element method for solving problems with singular solutions
848
Finite element method for stability and free vibration analyses of non-prismatic thin-walled beams
849
Finite Element Method for Static Cyclic Behavior of Steel Shear Wall with Corrugated Plates
850
Finite element method for the effect of various injection parameter on heat transfer for a power-law non-Newtonian fluid over a continuous stretched surface with thermal radiation
851
Finite element method for the feedback control of FGM shells in the frequency domain via piezoelectric sensors and actuators Original Research Article
852
Finite element method for the stress analysis of isotropic cylindrical helical spring
853
Finite Element Method for the Transient Process of the Separation of External Stores from Aircraft
854
Finite element method for time dependent scattering: nonreflecting boundary condition, adaptivity, and energy decay Original Research Article
855
Finite element method in plane Cosserat elasticity
856
Finite element method model of the mechanical behaviour of Jatropha curcas L. seed under compression loading
857
Finite Element Method of Composite Steel-Concrete Beams Considering Interface Slip and Uplift
858
FINITE ELEMENT METHOD OF DETERMINING DAYLIGHT FACTOR
859
Finite element method simulation of turbulent wavy core–annular flows using a k–ω turbulence model method
860
Finite element method simulations for two-phase material plastic strains
861
Finite element method simulations for two-phase material plastic strains
862
Finite element method simulations of heat flow in fixed bed solar water splitting redox reactors
863
Finite element method solution of electrically driven magnetohydrodynamic flow
864
Finite element method used in contact problems with dry friction
865
Finite element method-assisted acquisition of the matrix influence on the indentation results of an embedded hard phase
866
Finite element methodology for path integrals in fracture mechanics
867
Finite element methods for convection-diffusion problems using exponential splines on triangles
868
Finite element methods for materials modelling
869
Finite element methods for micropolar models of granular materials
870
Finite Element Methods for One Dimensional Fourth Order Semilinear Partial Differential Equation
871
Finite element methods for semilinear elliptic and parabolic interface problems
872
Finite element methods for structural hot spot stress determination—a comparison of procedures
873
Finite Element Methods for Structures with Large Stochastic Variations by I. Elishakoff and Y.J. Ren, Oxford University Press, Oxford, 2003, pp. ix+260, price £45, ISBN 0 19 852631 8
874
Finite element methods for the analysis of softening plastic hinges in beams and frames
875
Finite element methods for the analysis of strong discontinuities in coupled poro-plastic media Original Research Article
876
Finite element methods for the multi-scale modeling of softening hinge lines in plates at failure Original Research Article
877
Finite element methods for the non-linear mechanics of crystalline sheets and nanotubes
878
Finite element methods for the Stokes problem in R3 Original Research Article
879
Finite element methods for the Stokes problem on complicated domains
880
Finite element methods for the Stokes system based on a Zienkiewicz type N-simplex
881
Finite element methods for time-dependent convection–diffusion–reaction equations with small diffusion
882
Finite element methods for Timoshenko beam, circular arch and Reissner-Mindlin plate problems
883
Finite element methods for unsaturated porous solids and their application to dam engineering problems
884
Finite element methods with numerical quadrature for elliptic problems with smooth interfaces
885
Finite element methods with symmetric stabilization for the transient convection–diffusion–reaction equation
886
Finite element micromechanical analysis of the deformation and stress state dependent damage evolution in fiber reinforced metal matrix composites
887
Finite element micromechanical modeling the damping behaviors of PMMCs at room temperature
888
Finite element micromechanics model of impact compression of closed-cell polymer foams
889
Finite element microstructural homogenization techniques and intergranular, intragranular microstructural effects on effective diffusion coefficient of heterogeneous polycrystalline composite media
890
Finite element modal analysis and vibration-waveforms in health inspection of old bridges
891
Finite element model and size-dependent stability analysis of boron nitride and silicon carbide nanowires/nanotubes
892
Finite element model calibration effects on the earthquake response of masonry arch bridges
893
Finite element model creation and stability considerations of complex biological articulation: The human wrist joint
894
Finite element model for beef chilling using CFD-generated heat transfer coefficients
895
Finite element model for charge and discharge cycle of activated carbon hydrogen storage
896
Finite element model for the coupled radiative transfer equation and diffusion approximation
897
Finite element model for thermal analysis of ceramic heat exchanger tube under axial non-uniform convective heat transfer coefficient
898
Finite element model for vibration analysis of pre-twisted Timoshenko beam
899
Finite element model for vibration and buckling of functionally graded sandwich beams based on a refined shear deformation theory
900
Finite element model of a beam with a piezoceramic patch actuator
901
Finite element model of a lumbar spinal motion segment to predict circadian variation in stature
902
Finite element model of Cairo metro tunnel-Line 3 performance
903
Finite element model of efficient zig-zag theory for static analysis of hybrid piezoelectric beams
904
Finite element model of erosive wear on ductile and brittle materials
905
Finite element model of interdiffusion and reaction in polydisperse polymer blends
906
Finite element model of ionic nanowires with size-dependent mechanical properties determined by ab initio calculations
907
Finite element model of plate with elasto-plastic through crack
908
Finite element model of the contact between a vibrating conductor and a suspension clamp
909
Finite element model of thermal stress effects on stress distributions in rubber modified glassy polymers Part 1 - Single particle model
910
Finite element model of training in the superconducting quadrupole magnet SQ02 Original Research Article
911
Finite element model to study calcium distribution in oocytes involving voltage gated Ca2+ channel, ryanodine receptor and buffers
912
Finite element model to study two dimensional unsteady state calcium distribution in cardiac myocytes
913
Finite element model updating effects on nonlinear seismic response of arch dam–reservoir–foundation systems
914
Finite element model updating for a high-rise structure based on ambient vibration measurements
915
Finite element model updating from full-field vibration measurement using digital image correlation
916
Finite element model updating in structural dynamics by using the response surface method
917
Finite element model updating of a bowstring-arch railway bridge based on experimental modal parameters
918
Finite element model updating of a geared rotor system using particle swarm optimization for condition monitoring
919
Finite element model updating of a small scale bridge
920
Finite element model updating of bolted lap joints implementing identification of joint affected region parameters
921
Finite Element Model Updating of Rotating Structures Using Different Optimisation Techniques
922
Finite element model updating taking into account the uncertainty on the modal parameters estimates
923
FINITE ELEMENT MODEL UPDATING USING ANTIRESONANT FREQUENCIES
924
Finite element model updating using variable separation
925
Finite element model updating using vibration test data under base excitation
926
Finite element model updating with damping identification
927
Finite element model updating: Multiple alternatives
928
Finite element model with continuous transverse shear stress for composite laminates in cylindrical bending
929
Finite element modeling and analysis of a cardboard shelter
930
Finite element modeling and analysis of a hybrid steel–PSC beam connection
931
Finite Element Modeling and Cutting Simulation of Inconel 718
932
Finite element modeling and design of pH/temperature sensitive hydrogel based biphasic twisting actuators
933
Finite Element Modeling and Experimental Study of the Spline Tube Forming
934
Finite element modeling and experimental validation of fretting wear scars in thin steel wires
935
Finite element modeling and experimental verification of lower extremity shape change under load
936
Finite element modeling and failure prediction of friction stir welded blanks
937
Finite Element Modeling and Mechanical Behavior of Masonry-Infilled RC Frame
938
Finite element modeling and optimization of load transfer in multi-fastener joints using structural elements
939
Finite element modeling and optimization to prevent wire breakage in electro-discharge machining
940
Finite element modeling and robust vibration control of two-hinged plate using bonded piezoelectric sensors and actuators
941
Finite element modeling and shake-table testing of unidirectional infill masonry walls under out-of-plane dynamic loads
942
Finite element modeling and simulating of thermomechanic stress in thermocompression bondings
943
Finite element modeling and simulation for bending analysis of multi-layer printed circuit boards using woven fiber composite
944
FINITE ELEMENT MODELING AND SIMULATION OF WELDING PART 1: INCREASED COMPLEXITY
945
FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 2: IMPROVED MATERIAL MODELING
946
FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 3: EFFICIENCY AND INTEGRATION
947
Finite element modeling approaches of human cervical spine facet joint capsule
948
Finite element modeling as a tool for predicting the fracture behavior of robocast scaffolds
949
Finite element modeling concepts and linear analyses of 3D regular open cell structures
950
Finite element modeling discretization requirements for the laser forming process
951
Finite element modeling discretization requirements for the laser forming process
952
Finite element modeling discretization requirements for the laser forming process
953
Finite Element Modeling for Buckling Analysis of Tapered Axially Functionally Graded Timoshenko Beam on Elastic Foundation
954
Finite element modeling for chemical mechanical polishing process under different back pressures
955
Finite element modeling for the mechanical behavior of dowel-type timber joints
956
Finite element modeling of 3D human mesenchymal stem cell-seeded collagen matrices exposed to tensile strain
957
Finite element modeling of a 3D coupled foot–boot model
958
Finite element modeling of a generic stemless hip implant design in comparison with conventional hip implants
959
Finite element modeling of a geosynthetic pullout test
960
Finite element modeling of a leaking third component migration from a heat source buried into a fluid saturated porous medium
961
Finite element modeling of a linear membrane shell problem using tangential differential calculus
962
Finite element modeling of a micro-drill and experiments on high speed ultrasonically assisted micro-drilling
963
Finite element modeling of a microelectronic structure under uniform thermal loading
964
Finite element modeling of a PE pipe heap leachate collection system
965
Finite element modeling of a progressively expanding shape memory stent
966
Finite Element Modeling of a Reinforced Concrete Column Strengthened with Steel Jacket
967
Finite element modeling of a superconducting fault current limiter
968
Finite element modeling of active control of functionally graded shells in frequency domain via piezoelectric sensors and actuators
969
Finite element modeling of adhesive contact using molecular potential
970
Finite element modeling of an electrostatic painting device
971
Finite element modeling of asymmetric and transient flowfields during physical vapor transport
972
Finite Element Modeling of Axially Loaded CFRP-Confined Rectangular Reinforced Concrete Columns
973
Finite Element Modeling of Balloon Angioplasty by Considering Overstretch of Remnant Non-diseased Tissues in Lesions
974
Finite element modeling of Balsa wood structures under severe loadings
975
Finite element modeling of block shear in structural tees
976
Finite element modeling of blood flow in arteries Original Research Article
977
Finite element modeling of blood flow-induced mechanical forces in the outflow tract of chick embryonic hearts
978
Finite element modeling of bolted connections between cold-formed steel strips and hot rolled steel plates under static shear loading
979
Finite element modeling of bolted connections in thin-walled stainless steel plates under static shear
980
Finite element modeling of bolted steel connections designed by double channel
981
Finite element modeling of borehole heat exchanger systems: Part 1. Fundamentals
982
Finite element modeling of borehole heat exchanger systems: Part 2. Numerical simulation
983
Finite element modeling of bridges with equivalent orthotropic material method for multi-scale dynamic loads
984
Finite element modeling of clinch forming with automatic remeshing
985
Finite element modeling of coating formation and transient heat transfer in the electric arc spray process
986
Finite element modeling of composite plates with internal delamination
987
Finite element modeling of concrete beams prestressed with external tendons
988
Finite element modeling of concrete cover cracking due to non-uniform steel corrosion
989
Finite element modeling of confined concrete-I: Drucker–Prager type plasticity model
990
Finite element modeling of confined concrete-II: Plastic-damage model
991
Finite element modeling of consolidation of composite laminates
992
Finite element modeling of coupled heat transfer, moisture transport and carbonation processes in concrete structures
993
Finite element modeling of Cr(VI) reduction by Shewanella oneidensis MR-1 employing the dual-enzyme kinetic model
994
Finite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
995
Finite element modeling of crash test behavior for windshield laminated glass
996
Finite element modeling of creep deformation in cellular metals Original Research Article
997
Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons
998
Finite element modeling of cyclic thermal response of shape memory alloy wires with variable material properties
999
Finite element modeling of delamination by layerwise shell element allowing for interlaminar displacements
1000
Finite element modeling of delamination by layerwise shell element allowing for interlaminar displacements
