<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Fracture characteristics of different wood species under mode I loading perpendicular to the grain
2
Fracture characteristics of fatigued Ti–6Al–4V ELI as an implant material
3
Fracture characteristics of fatigued Ti–6Al–4V ELI as an implant material
4
Fracture Characteristics of Fiber Reinforced Composite Bars Used To Form Rigid Orthodontic Anchorage Units
5
Fracture characteristics of freestanding 8 wt% Y2O3–ZrO2 coatings by single edge notched beam and Vickers indentation tests
6
Fracture characteristics of thermal barrier coatings after tensile and bending tests
7
Fracture characteristics of thermally exposed 9Cr–1Mo steel after tensile and impact testing at room temperature
8
Fracture characteristics of TMCP and QT steel weldments with respect to crack length
9
Fracture characteristics to distinguish between accidental injury and non-accidental injury in dogs
10
Fracture characterization and prediction in a volcanic reservoir: A case study of the Permian Jiamuhe Formation in the Jinlong 2 Oil Field, Junggar Basin, China
11
Fracture characterization in patterned thin films by cross-sectional nanoindentation Original Research Article
12
Fracture characterization in tubular LSFCO ceramic membranes
13
Fracture characterization in tubular LSFCO ceramic membranes
14
Fracture characterization in tubular LSFCO ceramic membranes
15
Fracture characterization of bone under mode II loading using the end loaded split test
16
Fracture characterization of C/C composites under various stress modes by monitoring both mechanical and acoustic responses Original Research Article
17
Fracture characterization of Carbon fiber-reinforced polymer-concrete bonded interfaces under four-point bending
18
Fracture characterization of chalk in uniaxial and triaxial tests by rock mechanics, fractographic and electromagnetic radiation methods
19
Fracture characterization of interfacial cracks with frictional contact of the crack surfaces to predict failures in adhesive-bonded joints
20
Fracture characterization of sandwich structures interfaces under mode I loading
21
Fracture characterization using Earth tide analysis
22
Fracture conductivity – Design considerations and benefits in unconventional reservoirs
23
Fracture connectivity from fracture intersections in borehole image logs
24
Fracture control assessment in the base metal and welded joint of a pipeline steel
25
Fracture control of late Archean pluton emplacement in the northern Slave Province, Canada
26
Fracture control on type, morphology and distribution of parasitic volcanic cones: An example from Mt. Etna, Italy
27
Fracture control over thermal–mechanical creep and fatigue crack growth in near-alpha titanium alloy
28
Fracture control parameters for NiTi based shape memory alloys
29
Fracture corridors as seal-bypass systems in siliciclastic reservoir-cap rock successions: Field-based insights from the Jurassic Entrada Formation (SE Utah, USA)
30
FRACTURE CRITERIA FOR VISCOELASTIC AGING SOLIDS
31
FRACTURE CRITERIA FOR VISCOELASTIC AGING SOLIDS
32
Fracture criteria identification using an inverse technique method and blanking experiment
33
Fracture criteria identification using an inverse technique method and blanking experiment
34
Fracture criteria identification using an inverse technique method and blanking experiment
35
Fracture criterion and forming pressure design for superplastic bulging
36
Fracture criterion and forming pressure design for superplastic bulging
37
Fracture criterion for a conducting crack in poled PZT-PIC 151 investigated by stable crack growth Original Research Article
38
Fracture criterion for glass under impact loading
39
Fracture criterion for kinking cracks in a tri-material adhesively bonded joint under mixed mode loading
40
Fracture detection from water saturation log data using a Fourier–wavelet approach
41
Fracture detection problems:: applications and limitations of the energy momentum tensor and related invariants
42
Fracture development around deep underground excavations: Insights from FDEM modelling
43
Fracture development in shale and its relationship to gas accumulation
44
Fracture development on a weak interface ahead of a fluid-driven crack
45
Fracture dimensions, displacements and fluid transport
46
Fracture dislocation of the lateral condyle and medial epicondyle of the humerus associated with complete radial nerve transection
47
Fracture dislocation of the proximal humerus with ipsilateral shaft fracture: a report of two cases
48
Fracture Dynamic Propagation Model of High-Energy Gas Fracturing for Casing Perforated Well
49
Fracture energies at the rupture nucleation points of large interplate earthquakes
50
Fracture energy and crack growth in surface treated Yttria stabilized Zirconia for SOFC applications
51
Fracture energy and crack growth in surface treated Yttria stabilized Zirconia for SOFC applications
52
Fracture energy and softening behavior of high-strength concrete
53
Fracture energy based bi-dissipative damage model for concrete
54
Fracture energy based constitutive models for tensile fracture of metal powder compacts
55
Fracture energy determination and critical crack propagation between core and veneer ceramic interface by experiment and finite element method
56
Fracture energy for repaired cracks with bonded composite patch having two adhesive bands in aircraft structures
57
Fracture energy of concrete at high loading rates in tension
58
Fracture energy of natural fibre reinforced concrete
59
fracture energy of the concrete–FRP interface in strengthened beams
60
FRACTURE ENERGY OF WOOD AND ROOT BURL WOOD OF THUYA (TETRACLINIS ARTICULATA)
61
Fracture energy-based optimisation of steel fibre reinforced concretes
62
Fracture energy–fracture stress relationship for weak polymer–polymer interfaces
63
Fracture examination in concrete through combined digital image correlation and acoustic emission techniques
64
Fracture experiments on through wall cracked elbows under in-plane bending moment: Test results and theoretical/numerical analyses
65
Fracture Extraction from Colored X-Ray Images
66
Fracture fabrication of precision single-crystal silicon surfaces for MEMS devices
67
Fracture failure analysis of AISI 304L stainless steel shaft
68
Fracture failure of a diesel engine piston-pin
69
Fracture failure of a shell structure
70
Fracture failure of connection pipe of truck diesel engine oil-collector
71
Fracture force analysis at the interface of Pd and SrTiO3
72
Fracture Formation Evaluation of Reinforced Concrete Beam Subjected to Cycle Loading Using Acoustic Emission Technique
73
Fracture frequency of all-ceramic crowns during dynamic loading in a chewing simulator using different loading and luting protocols
74
Fracture functions and Jet Calculus
75
Fracture functions from cut vertices Original Research Article
76
Fracture Gap and Callus Area Delineation on Digital Radiogram Utilizing Modified Segmentation Algorithm
77
Fracture healing and transport properties of wellbore cement in the presence of supercritical CO2
78
Fracture History and Risk of Breast and Endometrial Cancer
79
Fracture History in Osteoporosis: Risk Factors and its Effect on Quality of Life
80
Fracture in a rubber-sprung railway wheel
81
Fracture in bending – The straining limits of monolithic sheets and machined tailor-made blanks
82
Fracture in Ceramic-Matrix Composites Reinforced with Strongly Bonded Metal Particles
83
Fracture in confined thin films: A discrete dislocation study Original Research Article
84
Fracture in human cortical bone: local fracture criteria and toughening mechanisms
85
Fracture in lamellar TiAl simulated with the cohesive model
86
Fracture in metal powder compaction
87
Fracture in metal–ceramic composites
88
Fracture in plates of finite thickness
89
Fracture in precursor-derived Si–C–N ceramics – Analysis of crack roughness and damage mechanisms
90
Fracture in quasi-brittle materials: a review of continuum damage-based approaches
91
Fracture in sheet metal forming: Effect of ductile damage evolution
92
Fracture in single-layer zirconia (YSZ)–bond coat alloy (NiCoCrAlY) composite coatings under thermal shock Original Research Article
93
Fracture in Westerly Granite under AE Feedback and Constant Strain Rate Loading: Nucleation, Quasi-static Propagation, and the Transition to Unstable Fracture Propagation
94
Fracture incidence and association with bone mineral density in elderly men and women: the Rotterdam Study
95
Fracture initiation and propagation in intact rock – A review
96
Fracture initiation associated with chemical degradation: observation and modeling
97
Fracture initiation at sharp notches: Correlation using critical stress intensities
98
Fracture initiation during volume increasing reactions in rocks and applications for CO2 sequestration
99
Fracture initiation mechanisms of thin hard coatings during the impact test
100
Fracture initiation of geometrically scaled, notched three-point-bend bars of a low-alloy ferritic steel
101
Fracture initiation revealed by variations in the fatigue fracture morphologies of PA 66 and PET fibers
102
Fracture initiation, development, and reactivation in folded sedimentary rocks at Raplee Ridge, UT
103
Fracture initiation, growth and effect on stress field: a numerical investigation
104
Fracture initiation/propagation parameters for duplex TiAl grain boundaries based on twinning, slip, crystal orientation, and boundary misorientation
105
Fracture instability and limit strength condition in structures with re-entrant corners
106
Fracture investigation at V-notch tip using coherent gradient sensing (CGS)
107
Fracture length scales in human cortical bone: The necessity of nonlinear fracture models
108
Fracture lifetime of hydrogen-charged AISI 4130 alloy steel under intermittent sustained overloads
109
Fracture limit curve in upset forging of cylinders
110
Fracture limit curve in upset forging of cylinders
111
Fracture limit prediction for a double safety structure in cylindrical-type lithium secondary batteries
112
Fracture limit prediction for roller hemming of aluminum alloy sheet
113
Fracture limits of sheet metals under stretch bending
114
Fracture limits of sheet metals under stretch bending
115
Fracture limits of sheet metals under stretch bending
116
Fracture load of different crown systems on zirconia implant abutments
117
Fracture load of provisional fixed partial dentures with long-span fiber-reinforced acrylic resin and thermocycling
118
Fracture load prediction of lead-free solder joints
119
Fracture load predictions and measurements for highly toughened epoxy adhesive joints
120
Fracture loads for ceramic samples with rounded notches
121
Fracture management in llamas and alpacas
122
Fracture mandibulaire sur ostéoradionécrose : option conservatrice médicale « Pentoclo » ?
123
Fracture mandibulaire sur ostéoradionécrose : option conservatrice médicale « Pentoclo » ?
124
Fracture measurements on insulation for high-field superconducting magnets: Relationship to processing regimes and test temperature
125
Fracture mechanical analysis of tungsten armor failure of a water-cooled divertor target
126
Fracture mechanical assessment of interface cracks with contact zones in piezoelectric bimaterials under thermoelectromechanical loadings II. Electrically impermeable interface cracks
127
Fracture mechanical assessment of interface cracks with contact zones in piezoelectric bimaterials under thermoelectromechanical loadings: I. Electrically permeable interface cracks
128
Fracture mechanical behavior of concrete and the condition of its fracture surface
129
Fracture mechanical behavior of red sandstone containing a single fissure and two parallel fissures after exposure to different high temperature treatments
130
Fracture mechanical character of small cracks in polycrystalline materials: concept and numerical K calculations Original Research Article
131
Fracture mechanical characterisation of mixed-mode toughness of thermoplast/glass interfaces
132
Fracture mechanical evaluation of an in-vessel melt retention scenario
133
Fracture mechanical evaluation of the effects of grinding residual stresses on bending strength of ceramics
134
Fracture mechanical evaluation of the effects of grinding residual stresses on bending strength of ceramics
135
Fracture mechanical investigations and cohesive zone failure modelling on automotive composites
136
Fracture mechanics
137
Fracture mechanics : 25th Volume. Edited by F. Erdogan. ASTM STP 1220, American Society for Testing and Materials, 1995, ISSN 1040-3094, £112 (approx. 707 pp.). Available in Europe exclusively from American Technical Publishers Ltd, Wilbury Way, Hitchin,
138
Fracture mechanics analyses including constraint investigations on reactor pressure vessels under pressurized thermal shock loading Original Research Article
139
Fracture mechanics analysis and evaluation for the RPV of the Chinese Qinshan 300 MW NPP under PTS
140
Fracture mechanics analysis and evaluation for the RPV of the Chinese Qinshan 300 MW NPP under PTS Original Research Article
141
Fracture mechanics analysis for inhomogeneous material behaviour Original Research Article
142
Fracture mechanics analysis for residual stress and crack closure corrections
143
Fracture mechanics analysis including the butt joint geometry for the superconducting conductor conduit of the National Centralized Tokamak
144
Fracture Mechanics Analysis of Cracked Wedges Under Various Varying Distributed Loadings
145
Fracture mechanics analysis of cracking in plain and reinforced concrete using the boundary element method
146
Fracture mechanics analysis of curved stiffened panels using BEM
147
Fracture Mechanics Analysis of Fourth Lumbar Vertebra in Method of Finite Element Analysis
148
Fracture mechanics analysis of geometrically nonlinear shear deformable plates
149
Fracture mechanics analysis of solder joint intermetallic compounds in shear test
150
Fracture mechanics analysis of the effect of substrate flexibility on solder joint reliability
151
Fracture mechanics analysis of the effects of temperature and material mismatch on the Smart-Cut® technology
152
Fracture mechanics analysis of thermally tempered glass plate: fracture induced by an embedded crack
153
Fracture mechanics analysis of thin coatings under plane-strain indentation
154
Fracture mechanics analysis on the bonded repair of a skin/stiffener with an inclined central crack
155
Fracture mechanics and damage mechanics based fatigue lifetime prediction of adhesively bonded joints subjected to variable amplitude fatigue
156
FRACTURE MECHANICS AND FATIGUE: A HISTORICAL PERSPECTIVE
157
Fracture mechanics and materials testing: forgotten pioneers of the early 20th century
158
Fracture mechanics and microstructure in NiTi shape memory alloys Original Research Article
159
Fracture mechanics and notch sensitivity
160
Fracture mechanics and scale effects in the fatigue of railway axles
161
FRACTURE MECHANICS APPLICATIONS TO DRILLING AND BLASTING
162
Fracture mechanics approach for flexural strengthening of reinforced concrete beams
163
Fracture mechanics approach to facesheet delamination in honeycomb: measurement of energy release rate of the adhesive bond
164
Fracture mechanics approach to fretting fatigue and problems to be solved
165
Fracture mechanics assessment of railway axles: Experimental characterization and computation
166
Fracture mechanics assessment of stress concentrations in incomplete fretting contacts
167
Fracture mechanics based approach to fatigue analysis of welded joints
168
Fracture mechanics based design of a railway wheel made of austempered ductile iron
169
Fracture mechanics based fatigue analysis of steel bridge decks by two-level cracked models
170
Fracture mechanics based fretting fatigue life predictions in Ti–6Al–4V
171
Fracture mechanics behavior of a NiFe superalloy sheath for superconducting fusion magnets. Part 1. property measurements
172
Fracture mechanics behavior of a NiFe superalloy sheath for superconducting fusion magnets. Part 2. magnet life analysis model
173
Fracture mechanics behavior of the T91 martensitic steel in contact with liquid lead–bismuth eutectic for application in an accelerator driven system
174
Fracture mechanics characterisation of effects of stabilisers on creep crack growth in polyethylene pipes
175
Fracture mechanics characterization of an anisotropic geomaterial
176
Fracture mechanics concepts for evaluation of irradiated reactor pressure vessel material behavior
177
Fracture mechanics concepts for evaluation of irradiated reactor pressure vessel material behavior
178
Fracture mechanics concepts for evaluation of irradiated reactor pressure vessel material behavior Original Research Article
179
Fracture mechanics evaluation of a 0.5Mo carbon steel subjected to high temperature hydrogen attack
180
Fracture mechanics evaluation of a crack generated in SiC/SiC composite first wall
181
Fracture mechanics evaluation of cast duplex stainless steel after thermal aging
182
Fracture mechanics evaluation of cast duplex stainless steel after thermal aging
183
Fracture mechanics evaluation of cast duplex stainless steel after thermal aging Original Research Article
184
Fracture mechanics evaluation of optical fibers
185
Fracture mechanics evaluation of small diameter piping considering the latest experimental results
186
Fracture mechanics evaluation of small diameter piping considering the latest experimental results Original Research Article
187
Fracture mechanics for a Mode I crack in piezoelectric materials
188
Fracture mechanics for a mode III crack in a piezoelectric materia
189
Fracture mechanics for the reconstruction of Noto Cathedral
190
Fracture mechanics global approach concepts applied to creep slow crack growth in a medium density polyethylene (MDPE)
191
Fracture mechanics in aircraft failure analysis: Uses and limitations
192
Fracture mechanics in creep situation interpretation of results on a test specimen Original Research Article
193
Fracture mechanics in fatigue calculations as the assistance in structural design. Case study
194
Fracture mechanics in railway applications––an overview
195
Fracture mechanics interpretation of thin spray-on liner adhesion tests
196
Fracture mechanics investigation regarding the effects of cracks on the structural integrity of a BWR-core shroud
197
Fracture mechanics investigation regarding the effects of cracks on the structural integrity of a BWR-core shroud
198
Fracture mechanics investigation regarding the effects of cracks on the structural integrity of a BWR-core shroud Original Research Article
199
Fracture Mechanics Model Applied to Shear Failure of Reinforced Concrete Beams without Stirrups
200
Fracture mechanics modeling using images of fracture surface
201
Fracture mechanics of air-entrained concrete subjected to compression
202
Fracture Mechanics of ASR in Concretes with Waste Glass Particles of Different Sizes
203
Fracture mechanics of composites with residual stresses, imperfect interfaces, and traction-loaded cracks
204
Fracture mechanics of concrete and concrete structures 4th International FraMCoS Conference, held in Cachan, France, from May 28 to June 1, 2001
205
Fracture mechanics of diamond-like carbon (DLC) films coated on flexible polymer substrates
206
Fracture mechanics of flanged reinforced concrete sections
207
Fracture mechanics of hydroxyapatite single crystals under geometric confinement
208
Fracture mechanics of impacted laminated glass subjected to various fatigue stressing conditions
209
Fracture Mechanics of Marble Using a Splitting Tension Test
210
Fracture mechanics of mining dragline booms
211
Fracture mechanics of piezoelectric materials – Where are we right now?
212
Fracture mechanics of plate debonding: Validation against experiment
213
Fracture mechanics of reactive powder concrete: material modelling and experimental investigations
214
Fracture mechanics of Sigma SM1140+ fibre
215
Fracture mechanics of stainless steel foams
216
Fracture mechanics parameters and finite element and boundary element methods — A bibliography (1992–1994)
217
Fracture mechanics principles
218
Fracture mechanics study on the intermetallic compound cracks for the solder joints of electronic packages
219
Fracture mechanics testing on specimens with low constraint––standardisation activities within ISO and ASTM
220
Fracture mechanics using a 3D composite element
221
Fracture mechanics using a 3D composite element
222
Fracture Mechanics, An Introduction (Second Edition)
223
Fracture Mechanics, Crack Propagation and Microhardness Studies on Flux Grown ErAlO3 Single Crystals
224
Fracture mechanics-based design and reliability assessment of fillet welded cylindrical joints under tension and torsion loading
225
Fracture mechanics-based life prediction of a riveted lap joint
226
Fracture mechanism in bitumen, modified bitumen and asphalt mixes
227
Fracture Mechanism in Plastic Sheet Materials
228
Fracture mechanism maps in unirradiated and irradiated metals and alloys
229
Fracture mechanism of a dissimilar metal welded joint in nuclear power plant
230
FRACTURE MECHANISM OF BORATED STAINLESS STEEL
231
Fracture Mechanism of CoCrMo Porous Nanocomposite Prepared by Powder Metallurgy Route
232
Fracture mechanism of FeAl matrix composites with discontinuous ceramic reinforcements
233
Fracture mechanism of FeAl matrix composites with discontinuous ceramic reinforcements
234
Fracture mechanism of flexible graphite sheets Original Research Article
235
Fracture mechanism of metal electrode integrated on a chip and fabrication of a poly(ethylene terephthalate) electrophoresis microchip
236
Fracture mechanism of Mg–3Al–1Zn sheet at the biaxial state with respect to forming temperatures
237
Fracture mechanism of Ni3Al alloys and their composites with ceramic particles at elevated temperatures
238
Fracture mechanism of scandia-doped zirconia Original Research Article
239
Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading
240
Fracture mechanisms and fracture mechanics at ultrasonic frequencies
241
Fracture mechanisms and fracture toughness in semicrystalline polymer nanocomposites
242
Fracture mechanisms and size effects of brittle metallic foams: In situ compression tests inside SEM
243
Fracture mechanisms in biopolymer films using coupling of mechanical analysis and high speed visualization technique
244
Fracture mechanisms in polystyrene/laponite nanocomposites prepared by emulsion polymerization
245
Fracture mechanisms in sintered steels with 3.5%(wt.) Mo
246
Fracture mechanisms in sintered steels with 3.5%(wt.) Mo
247
Fracture mechanisms induced in a brittle material by a hard cutting indenter
248
Fracture mechanisms of aluminium alloy AA7075-T651 under various loading conditions
249
Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes
250
Fracture mechanisms of epoxy-based ternary composites filled with rigid-soft particles
251
Fracture mechanisms of Hg0.8Cd0.2Te induced by pulsed TEA-CO2 laser
252
Fracture mechanisms of offset rock joints-A laboratory investigation
253
Fracture mechanisms of retrieved titanium screw thread in dental implant
254
Fracture mechanisms of the Strombus gigas conch shell: II-micromechanics analyses of multiple cracking and large-scale crack bridging Original Research Article
255
Fracture mechanisms under monotonic and non-monotonic low Lode angle loading
256
Fracture micromechanisms of bioabsorbable PLLA/PCL polymer blends
257
Fracture mirror of optical fibers
258
Fracture mode analysis and related surface deformation during dyke intrusion: Results from 2D experimental modelling
259
Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features
260
Fracture mode transition phenomena in steels as a consequence of the change of operating deformation mode
261
Fracture mode transition phenomena in steels as a consequence of the change of operating deformation mode
262
Fracture Model for a Thin Layer of a Fibrous Composite
263
Fracture Model for Flexural Failure of Beams Retrofitted with CARDIFRC
264
Fracture modeling of isotropic functionally graded materials by the numerical manifold method
265
Fracture modeling using a micro-structural mechanics approach––I. Theory and formulation
266
Fracture modeling using a microstructural mechanics approach––II. Finite element analysis
267
Fracture modelling of WC-Co hardmetals using crystal plasticity theory and the Gurson model
268
Fracture Modes in a Binary Titanium Alloy
269
Fracture modes in fiber networks
270
Fracture modes in tubular LSFCO ceramic membranes under graded reducing conditions
271
Fracture modes of HAYNES® 230® alloy during fatigue-crack-growth at room and elevated temperatures
272
Fracture modes of HAYNES® 230® alloy during fatigue-crack-growth at room and elevated temperatures
273
Fracture morphology and deformation characteristics of repeatedly impacted thermoplastic matrix composites
274
Fracture morphology pattern transition dominated by the crack tip curvature radius in brittle metallic glasses
275
Fracture network evaluation program (FraNEP): A software for analyzing 2D fracture trace-line maps
276
Fracture network modeling conditioned to pressure transient and tracer test dynamic data
277
Fracture networks and fluid transport in active fault zones
278
Fracture networks and hydrate distribution at Hydrate Ridge, Oregon
279
Fracture Non-union: A Review of Clinical Challenges and Future Research Needs
280
Fracture of 6056 aluminum sheet materials: effect of specimen thickness and hardening behavior on strain localization and toughness
281
Fracture of 6056 aluminum sheet materials: effect of specimen thickness and hardening behavior on strain localization and toughness
282
Fracture of a compressor rotor made from grey cast iron
283
Fracture of a ductile layer constrained by stiff substrates
284
Fracture of a fatty acid multilayer film
285
Fracture of a Liquefied Crack and the Physics of Rayleigh Waves
286
Fracture of a piezoelectric fiber/elastic matrix composite
287
FRACTURE OF A PIEZOELECTRIC MATERIAL STRIP UNDER STEADY STATE THERMAL LOAD
288
Fracture of a rectangular piezoelectromagnetic body
289
Fracture of a ridged multi-year Arctic sea ice floe
290
Fracture of a sirolimus-eluting stent with migration
291
Fracture of a Superplate: The Proximal Cause of the Hawaiian-Emperor Seamount Bend?
292
Fracture of a textured anisotropic ceramic Original Research Article
293
Fracture of adhesively-bonded pultruded GFRP joints under constant amplitude fatigue loading
294
Fracture of aluminium alloy 2024 under biaxial and triaxial loading
295
Fracture of aluminium foam core sacrificial cladding subjected to air-blast loading
296
Fracture of aluminium reinforced with densely packed ceramic particles: influence of matrix hardening Original Research Article
297
Fracture of aluminium reinforced with densely packed ceramic particles: link between the local and the total work of fracture Original Research Article
298
Fracture of an aircraftʹs landing gear
299
Fracture of an automobile anti-roll bar
300
Fracture of an isotropic medium strengthened with a regular system of stringers
301
Fracture of anodic-bonded silicon-thin film glass-silicon triple stacks
302
Fracture of austenitic steel subject to a wide range of stress triaxiality ratios and crack deformation modes
303
Fracture of bicrystal metal/ceramic interfaces: A study via the mechanism-based strain gradient crystal plasticity theory
304
Fracture of bone tissue: The ‘hows’ and the ‘whys’
305
Fracture of brittle materials: effects of test method and threshold stress on the Weibull modulus
306
Fracture of cold jointed concrete interfaces
307
Fracture of Colvin-Galloway Future Band Causing a Tear in the Anterior Mitral Leaflet
308
Fracture of components with V-shaped notches
309
Fracture of composite alumina/yttria-stabilized zirconia joints
310
Fracture of concrete and rock editorial
311
Fracture of concrete materials and structures
312
Fracture of concrete structure using simplified meshless method
313
FRACTURE OF CONNECTIONS BETWEEN STEEL AND REINFORCED CONCRETE SHEAR WALLS UNDER THE CYCLIC LOADING
314
Fracture of convoluted and lamellar α2 + γ TiAl alloys
315
Fracture of cutting tools due to the formation of untempered martensite
316
Fracture of discontinuous wood-adhesive bonds
317
Fracture of ECAP-deformed iron and the role of extrinsic toughening mechanisms Original Research Article
318
Fracture of elastomers by cavitation
319
Fracture of elastomers under static
320
Fracture of electrostrictive solids subjected to combined mechanical and electric loads
321
Fracture of Fe–3 wt.% Si single crystals
322
Fracture of FeNiB-NiP amorphous bilayer ribbon
323
Fracture of FeNiB-NiP amorphous bilayer ribbon
324
Fracture of filaments and its influence on critical current and residual strength of fatigued Nb–Ti/Cu superconducting composite Original Research Article
325
Fracture of functionally graded materials
326
Fracture of high carbon high strength anchor rods
327
Fracture of high performance fibres
328
Fracture of high volume fraction ceramic particle reinforced aluminium under multiaxial stress Original Research Article
329
Fracture of Magnesium Alloy in Cold Forging
330
Fracture of Materials: Moving Forwards
331
Fracture of metal/ceramic interfaces
332
Fracture of metallic glasses at notches: Effects of notch-root radius and the ratio of the elastic shear modulus to the bulk modulus on toughness Original Research Article
333
Fracture of model concrete: 1. Types of fracture and crack path
334
Fracture of model concrete: 2. Fracture energy and characteristic length
335
Fracture of multilayer oxide composites
336
Fracture of multilayer oxide composites
337
Fracture of nanostructured Sn/C anodes during Li-insertion
338
Fracture of nickel–titanium superelastic alloy in sodium hypochlorite solution
339
Fracture of nickel–titanium superelastic alloy in sodium hypochlorite solution
340
Fracture of nitrided and nitrocarburized blunt notch three-point bending die steel specimens
341
Fracture of notched round-bar NiTi-specimens
342
Fracture of open- and closed-cell metal foams
343
Fracture of open cell copper foams under tension
344
Fracture of organosilicate glass thin films: environmental effects
345
Fracture of organosilicate glass thin films: environmental effects
346
Fracture of ossified Achilles tendon
347
Fracture of piezoelectromagnetic materials
348
Fracture of Plain and Fiber-Reinforced Concrete Slabs under Monotonic Loading
349
Fracture of plasma-sprayed thick thermal barrier coatings under multiaxial stress states
350
Fracture of polybutylene terephthalate (PBT) film
351
Fracture of polycrystalline Fe−2.3%V−0.12%P alloy
352
Fracture of polycrystalline silicon
353
Fracture of polymer blends: Effect of characteristic number of interfacial entanglements and matrix toughness
354
Fracture of polymer gels
355
Fracture of Polymethylmethacrylate under Pulse Loading Conditions
356
Fracture of porous materials – Influence of the pore size
357
Fracture of prismatic aluminum tubes under reverse straining
358
Fracture of quasi-isotropic composite sheets with sharp notches
359
Fracture of random matrix-inclusion composites: scale effects and statistics
360
Fracture of reinforcing steels in concrete damaged by ASR
361
Fracture of Scantling Support Structure of Gas Processing Module on FPSO
362
Fracture of shape memory CuAlNi single crystals
363
Fracture of silicon-rich particles during sliding contact of Al–Si alloys
364
Fracture of steel moment connections in the Northridge earthquake
365
Fracture of steel moment connections in the Northridge earthquake
366
Fracture of Supracondylar Process of the Humerus (Case Report)
367
Fracture of sustained tensile-loaded Ti–0.2% Pd alloy in acid and neutral fluoride solutions
368
Fracture of the cervical spine. Operative results and neurological outcome
369
Fracture of the coracoid process, the greater tuberosity, and the glenoid rim after acute first-time anterior shoulder dislocation: A case report
370
Fracture of the delicate bamboo: a diagnostic pitfall
371
Fracture of the lateral process of the talus associated with snowboarding
372
Fracture of the radial head with ulnar collateral ligament rupture
373
Fracture of the scapular body: Functional outcome after conservative treatment
374
Fracture of the tibia: Complication of bone grafting to the anterior maxilla
375
Fracture of the winter sea ice cover on the Arctic ocean
376
Fracture of the Wrist and Incidence of the Complex Regional Pain Syndrome Type 1: A Case Series Study
377
Fracture of thermally activated NiTi shape memory alloy wires
378
Fracture of thin cast slabs of Al–Sn alloys during cold rolling
379
Fracture of tooth enamel from incipient microstructural defects
380
Fracture of Two-Layer Plates with Cracks in Tension with Regard for Local Buckling
381
Fracture of underwater notched structures
382
Fracture of U-notched specimens under mixed mode: Experimental results and numerical predictions
383
Fracture of Zircaloy-4 cladding tubes with or without hydride blisters in uniaxial to plane strain conditions with standard and optimized expansion due to compression tests
384
Fracture orientation and induced anisotropy of gas hydrate-bearing sediments in seismic chimney-like-structures of the Ulleung Basin, East Sea
385
Fracture orientation characterization: Minimizing statistical modelling errors
386
Fracture orientation characterization: Minimizing statistical modelling errors
387
Fracture parameters at bi-material ceramic interfaces under bi-axial state of stress
388
Fracture Parameters for Cracked Cylindrical Shells
389
Fracture parameters for high-performance concrete
390
Fracture parameters of a penny-shaped crack at the interface of a piezoelectric bi-material system
391
Fracture parameters of ferroelectric ceramics connected with the roughness of the edges of the crack and its deflection
392
Fracture parameters of interfacial crack of bimaterial under the impact loading
393
Fracture paths and ultrananocrystalline diamond
394
Fracture pattern of Thjَrsلrdalur central volcano with respect to rift-jump and a migrating transform zone in South Iceland
395
Fracture patterns at lava–ice contacts on Kokostick Butte, OR, and Mazama Ridge, Mount Rainier, WA: Implications for flow emplacement and cooling histories
396
Fracture patterns of the growth plate and surrounding bone in the ovine knee joint at different ages
397
Fracture penetration in planetary ice shells
398
Fracture performance of clay/epoxy nanocomposites with clay surface-modified using 3-aminopropyltriethoxysilane
399
Fracture permeability and water–rock interaction in a shallow volcanic groundwater reservoir and the concern of its interaction with the deep geothermal reservoir of Mt. Amiata, Italy
400
Fracture phenomena of microdrills in static and dynamic conditions
401
Fracture porosity in the décollement zone of Nankai accretionary wedge using Logging While Drilling resistivity data
402
Fracture prediction for piezoelectric ceramics based on the electric field saturation concept
403
Fracture prediction in 4-point bending of an extruded aluminum panel
404
Fracture prediction of a 3D C/C material under impact
405
Fracture prediction of cardiac lead medical devices using Bayesian networks
406
Fracture prediction of cardiac lead medical devices using Bayesian networks
407
Fracture prediction of hole patterns with multiple cracks using the finite element method
408
Fracture prediction of thin plates under hemi-spherical punch with calibration and experimental verification
409
Fracture prediction of thin plates under hemi-spherical punch with calibration and experimental verification
410
Fracture prediction of thin plates under hemi-spherical punch with calibration and experimental verification
411
Fracture prediction of thin plates under localized impulsive loading. Part I: dishing
412
Fracture prediction of thin plates under localized impulsive loading. Part II: discing and petalling
413
Fracture prevalence and relationship to endocrinopathy in iron overloaded patients with sickle cell disease and thalassemia
414
Fracture Process in ± θ Laminates Subjected to Mode II Loading
415
Fracture process zone in granite: a microstructural analysis
416
Fracture process zone in notched concrete beam under three-point bending by acoustic emission
417
Fracture process zone size and true fracture energy of concrete using acoustic emission
418
Fracture processes studied in CRESST
419
Fracture processes studied in CRESST
420
Fracture Propagation Characteristic and Micromechanism of Rock-Like Specimens under Uniaxial and Biaxial Compression
421
Fracture properties evaluation of carbon steel piping for main steam line Original Research Article
422
Fracture properties of (CeO2)1−x(RO1.5)x (R = Y, Gd, and Sm; x = 0.02–0.20) ceramics
423
Fracture properties of bamboo
424
Fracture properties of concrete reinforced with steel-polypropylene hybrid fibres
425
Fracture properties of concrete reinforced with steel–polypropylene hybrid fibres
426
Fracture properties of Fe–40 at.% Al matrix composites reinforced with ceramic particles and fibers
427
Fracture properties of Fe–40 at.% Al matrix composites reinforced with ceramic particles and fibers
428
Fracture properties of growth plate cartilage compared to cortical and trabecular bone in ovine femora
429
Fracture properties of high performance steels and their welds
430
Fracture properties of high-purity V–4Cr–4Ti alloy (NIFS-HEAT-2) at room temperature
431
Fracture properties of hydrided Zircaloy-4 cladding in recrystallization and stress-relief anneal conditions
432
Fracture properties of hydrogenated amorphous silicon carbide thin films Original Research Article
433
Fracture properties of interfacially doped Nb-A12O3 bicrystals: I, fracture characteristics Original Research Article
434
Fracture properties of interfacially doped Nb-Al2O3 bicrystals: II, relation of interfacial bonding, chemistry and local plasticity Original Research Article
435
Fracture properties of multiphase alloy MP35N
436
Fracture properties of nickel-based anodes for solid oxide fuel cells
437
Fracture properties of notched and pre-cracked specimens of a tempered martensitic steel at low temperature
438
Fracture properties of SiC ceramics with oxynitride additives
439
Fracture properties of sintered UO2 ceramic pellets with duplex microstructure
440
Fracture properties of spray-dried powder compacts: Effect of granule size
441
Fracture range detection in hydro-abrasive erosion of concrete
442
Fracture rate in Thoroughbred racehorses is affected by dam age and parity
443
Fracture R-curve characterization of toughened epoxy adhesives
444
Fracture R-curve of a toughened epoxy adhesive as a function of irreversible degradation
445
Fracture reasons investigation of turning rack component in vehicle
446
Fracture reliability of a typical Northridge steel moment resisting connection
447
Fracture repair: Modulation of fracture-callus and mechanical properties by sequential application of IL-6 following PTH 1–34 or PTH 28–48
448
Fracture resistance and cuspal deflection of incompletely excavated teeth
449
Fracture resistance and cuspal deflection of incompletely excavated teeth
450
Fracture Resistance and Failure Mode of Endodontically Treated Premolars Restored with Different Adhesive Restorations
451
Fracture Resistance and Failure Mode of Endodontically Treated Premolars Restored with Different Adhesive Restorations
452
Fracture resistance and failure modes of CEREC endo-crowns and conventional post and core-supported CEREC crowns
453
Fracture resistance and failure patterns of endodontically treated mandibular molars with and without glass fiber post in combination with a zirconia–ceramic crown
454
Fracture resistance and marginal discrepancy of porcelain laminate veneers influenced by preparation design and restorative material in vitro
455
Fracture resistance and marginal discrepancy of porcelain laminate veneers influenced by preparation design and restorative material in vitro
456
Fracture resistance behavior of alumina–zirconia composites
457
Fracture resistance curve behavior of multilayered alumina–zirconia composites produced by centrifugation Original Research Article
458
Fracture resistance curve over the complete mixed-mode I and II range for 5083 aluminum alloy
459
Fracture resistance curves and toughening mechanisms in polymer based dental composites
460
Fracture resistance estimation of elastic ceramics in edge flaking: EF baseline
461
Fracture resistance evaluation of RuO2-based thick film resistor material by in situ crack extension observation in a scanning electron microscope Original Research Article
462
Fracture resistance improvement of polypropylene by joint action of core–shell particles and nucleating agent
463
Fracture Resistance of a Bulk-Fill and a Conventional Composite and the Combination of Both for Coronal Restoration of Severely Damaged Primary Anterior Teeth
464
Fracture resistance of a cracked concrete beam post-strengthened with FRP sheets
465
Fracture resistance of a doped PZT ceramic for multilayer piezoelectric actuators: Effect of mechanical load and temperature
466
Fracture resistance of all ceramic crowns supported by zirconia and alumina versus titanium implant abutments
467
Fracture resistance of all-ceramic zirconia bridges with differing phase stabilizers and quality of sintering
468
Fracture resistance of aluminum multilayer composites
469
Fracture resistance of amalgam/glass-polyalkenoate open sandwich Class II restorations: An in vitro study
470
Fracture resistance of asphalt concrete under different loading modes and temperature conditions
471
Fracture resistance of atmospheric plasma sprayed thermal barrier coatings
472
Fracture Resistance of Ceramics upon Edge Chipping
473
Fracture resistance of ceramics: Base diagram and R-line
474
Fracture Resistance of Ceramics: Edge Fracture Method
475
Fracture resistance of class II preformed ceramic insert and direct composite resin restorations
476
Fracture Resistance of Composite Fixed Partial Dentures Reinforced with Pre-impregnated and Non-impregnated Fibers
477
Fracture resistance of cracked duplex stainless steel elbows under bending with or without internal pressure
478
Fracture resistance of cracked duplex stainless steel elbows under bending with or without internal pressure Original Research Article
479
Fracture resistance of dentin-composite interfaces using different adhesive resin layers
480
Fracture resistance of different implant supported ceramic abutment/crown systems
481
Fracture resistance of different metal substructure designs for implant-supported porcelain-fused-to-metal (PFM) crowns
482
Fracture Resistance of Endodontically Treated Anterior Teeth Restored with Different Post Systems: An in Vitro Study
483
Fracture resistance of endodontically treated premolars restored with bulk‑fill composite resins: The effect of fiber reinforcement
484
Fracture resistance of endodontically treated roots using different preparation-obturation combinations
485
Fracture resistance of endodontically treated teeth restored with or without post systems
486
Fracture Resistance of Endodontically Treated Teeth Restored with Ormocer and Nanofill Composite Resins
487
Fracture resistance of endodontically treated teeth restored with Zirconia filler containing composite core material and fiber posts
488
Fracture Resistance of Endodontically-treated Maxillary Premolars Restored with Composite Resin along with Glass Fiber Insertion in Different Positions
489
Fracture resistance of immature teeth filled with mineral trioxide aggregate or calcium-enriched mixture cement: An ex vivo study
490
Fracture resistance of implant-supported screw- versus cement-retained porcelain fused to metal single crowns: SEM fractographic analysis
491
Fracture Resistance of Maxillary Primary Anterior Restorations Using Grandio and Grandio Flow Composites with Two Different Types of Posts: An In Vitro Study
492
Fracture resistance of mechanically compromised premolars restored with polyethylene fiber and adhesive materials
493
Fracture resistance of mineral reinforced polyamide 6
494
Fracture Resistance of over Flared Endodontically Treated Central Incisors Restored with Multiple Prefabricated and Custom-Made Glass Fiber Posts
495
Fracture resistance of overtly flaring root canals filled with resin‑based obturation material
496
Fracture Resistance of Pine Nut to Compressive Loading
497
Fracture resistance of premolars teeth restored by silorane, nanohybrid and two types of fiber‑reinforced composite: an in‑vitro study
498
Fracture resistance of pulpless teeth restored with post-cores and crowns
499
Fracture resistance of pulpotomized and composite‑restored primary molars: Incremental versus bulk‑fill techniques
500
Fracture Resistance of Pulpotomized Primary Molars Re-stored with Extensive Class II Amalgam Restorations
501
Fracture resistance of reattached incisor fragments with mini fibre-reinforced composite anchors
502
Fracture resistance of reattached incisor fragments with mini fibre-reinforced composite anchors
503
Fracture resistance of rehabilitated flared root canals with anatomically adjustable fiber post
504
Fracture Resistance of Residually-Stressed Ceramic Laminated Structures
505
Fracture Resistance of Root Canals Obturated with Gutta-Percha versus Resilon with Two Different Techniques
506
Fracture resistance of root-filled teeth after cavity preparation with conventional burs, Er: YAG and Er,Cr: YSGG lasers
507
Fracture Resistance of Roots after Application of Different Sealers
508
Fracture resistance of roots enlarged with various rotary systems and obturated with different sealers
509
Fracture Resistance of Roots Filled With Bio-Ceramic and Epoxy Resin-Based Sealers: In Vitro Study
510
Fracture resistance of roots obturated with a single expandable polymer cone
511
Fracture Resistance of Roots Restored with Four Different Fiber-Reinforced Composite Posts
512
Fracture resistance of short, randomly oriented, glass fiber-reinforced composite premolar crowns
513
Fracture Resistance of Simulated Immature Teeth Obturated with GuttaPercha or Resilon and Reinforced by Composite or Post
514
Fracture resistance of structurally compromised and normal endodontically treated teeth restored with different post systems: An in vitro study
515
Fracture resistance of structurally compromised premolar roots restored with single and accessory glass or quartz fiber posts
516
Fracture resistance of sunflower seed and kernel to compressive loading Original Research Article
517
Fracture resistance of teeth restored with dentin-bonded crowns constructed in a leucite-reinforced ceramic
518
Fracture Resistance of Teeth Restored with Direct and Indirect Composite Restorations
519
Fracture resistance of three different posts in restoration of severely damaged primary anterior teeth: An in vitro study
520
Fracture Resistance of Unsplit Pistachio (Pistacia vera L.) Nuts against Splitting Force, under Compressive Loading
521
Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing
522
Fracture Resistance of Zirconia Restorations with a Modified Framework Design
523
Fracture Resistance of Zirconia Restorations with Four Different Framework Designs
524
Fracture resistance of Zr–Nb alloys under low-cycle fatigue tests
525
Fracture resistant properties of AerMet steels
526
Fracture response of externally flawed aluminum cylindrical shells under internal gaseous detonation loading
527
Fracture risk after surgery for peptic ulcer disease: a population-based cohort study
528
Fracture Risk in Men With Congestive Heart Failure: Risk Reduction With Spironolactone Original Research Article
529
Fracture Risk in Patients with Celiac Disease, Crohn’s Disease, and Ulcerative Colitis: A Nationwide Follow-up Study of 16,416 Patients in Denmark
530
Fracture risk in users of oral anticoagulants: A nationwide case-control study
531
Fracture Risk Increases After Breast Or Other Cancer Diagnosis
532
Fracture risk of lithium-disilicate ceramic inlays: A finite element analysis
533
Fracture risk reduction during treatment with teriparatide is independent of pretreatment bone turnover
534
Fracture risks related to certain factors by site of fracture among perimenopausal women
535
Fracture roughness and thermal exchange: A case study at Soultz-sous-Forêts
536
Fracture roughness scaling and its correlation with grain boundary network structure Original Research Article
537
Fracture sampling on a cylinder: From scanlines to boreholes and tunnels
538
Fracture saturation and critical thickness in layered materials
539
Fracture scaling relations for scratch tests of axisymmetric shape
540
Fracture sealing in zircon as evaluated by electron microprobe analyses and back-scattered electron imaging
541
Fracture simulation of CFRP laminates in mixed mode bending
542
Fracture simulation of pre-cracked heterogeneous asphalt mixture beam with movable three-point bending load
543
Fracture simulations via large-scale nonequilibrium molecular dynamics
544
Fracture site augmentation with calcium phosphate cement reduces screw penetration after open reduction–internal fixation of proximal humeral fractures
545
Fracture spacing in layered rocks: a new explanation based on the stress transition
546
Fracture statistics in the three-dimensional random fuse model
547
Fracture statistics modeling of laminate composites
548
Fracture statistics of ceramic laminates strengthened by compressive residual stresses
549
Fracture statistics of ceramics – Weibull statistics and deviations from Weibull statistics
550
Fracture statistics of dental ceramics: Discrimination of strength distributions
551
Fracture step structure: geometrical characterization and effects on fluid flow and breakthrough curve
552
Fracture stiffness measurement in tibial shaft fractures: a non-invasive method
553
Fracture stiffness measurement using the orthometer: reproducibility and sources of error
554
Fracture stimulation fundamentals
555
Fracture strength and behavior of carbon steel pipes with local wall thinning subjected to cyclic bending load Original Research Article
556
Fracture strength and bending of all-ceramic and fiber-reinforced composites in inlay-retained fixed partial dentures
557
Fracture Strength and Bending of Fiber-Reinforced Composites and Metal Frameworks in Fixed Partial Dentures
558
Fracture strength and bond capacities of electron irradiated fiber reinforced composites
559
Fracture strength and damage progression of the fiber/matrix interfaces in titanium-based MMCs with different interfacial layers
560
Fracture strength and fatigue resistance of dental resin-based composites
561
Fracture strength and fracture patterns of root filled teeth restored with direct resin restorations
562
Fracture strength and fracture patterns of root filled teeth restored with direct resin restorations
563
Fracture strength and survival rate of endodontically treated maxillary incisors with approximal cavities after restoration with different post and core systems: an in-vitro study
564
Fracture strength distribution of porous ceramics under quasi-static load
565
Fracture strength estimation of SiC block for IS process
566
Fracture strength of all-ceramic posterior inlay-retained fixed partial dentures
567
Fracture strength of alumina fiber reinforced aluminum wire with and without a torsional pre-strain Original Research Article
568
Fracture strength of carbon fiber under combined torsional and tensile loading
569
Fracture strength of direct versus indirect laminates with and without fiber application at the cementation interface
570
Fracture Strength of Endodontically Treated Teeth Restored with Casting Post and Core and Glass-Fiber with Composite Core
571
Fracture Strength of Flared Root Canals Restored with Different Post Systems
572
Fracture strength of flawed cylindrical pressure vessels under cryogenic temperatures Original Research Article
573
Fracture strength of ion-exchange silicate-containing dental glass ceramics
574
Fracture strength of machined ceramic crowns as a function of tooth preparation design and the elastic modulus of the cement
575
Fracture strength of mesiobuccal roots following canal preparation with hand and rotary instrumentation: An in vitro study
576
Fracture strength of micro-tubular solid oxide fuel cell anode in redox cycling experiments
577
Fracture strength of prefabricated all-ceramic posterior inlay-retained fixed dental prostheses
578
Fracture Strength of Severely Damaged Primary Anterior Teeth after Restoration with Composite Resin and Resin-Modified Glass Ionomer Cement
579
Fracture strength of teeth restored with fiber post and apical plug
580
Fracture strength of temporary fixed partial dentures: CAD/CAM versus directly fabricated restorations
581
Fracture strength of tensile loaded graphite-epoxy laminates containing cracks and circular holes
582
Fracture strength of tensile loaded graphite-epoxy laminates containing cracks and circular holes
583
Fracture Strength of Three-Unit Implant Supported Fixed Partial Dentures with Excessive Crown Height Fabricated from Different Materials
584
Fracture strength of tourmaline and epidote by three-point bending test: application to microboudin method for estimating absolute magnitude of palaeodifferential stress
585
Fracture strength of various lay-ups of carbon/epoxy laminates using the modified inherent flaw model
586
Fracture strength of welded aluminium joints in commercial road vehicles
587
Fracture studies of poly(propylene)/elastomer blend with β-form nucleating agent
588
Fracture studies of selected dental restorative composites
589
Fracture studies on 3D geometrically similar beams
590
Fracture study of a horizontal well in a tight reservoir — Kuwait
591
Fracture study of aluminum composite coatings produced by the kinetic spray method
592
Fracture study of organic–inorganic coatings using nanoindentation technique
593
Fracture study of the composite using essential work of fracture method: PP–SEBS–g–MA/E1 clay
594
Fracture surface analysis on nano-SiO2/epoxy composite
595
FRACTURE SURFACE DEVELOPMENT IN AN OVERLOADED D16T Al-ALLOY SUBJECTED TO BIAXIAL LOADING. A FRACTOGRAPHIC ANALYSIS
596
Fracture surface examination of dental ceramics using fractal analysis
597
Fracture surface morphology of compressed bulk metallic glass-matrix-composites and bulk metallic glass
598
Fracture surface of plastic materials: the roughness exponent
599
Fracture surface roughness and roughness-induced fatigue crack closure in Ti-2.5 wt% Cu
600
Fracture surface roughness and roughness-induced fatigue crack closure in Ti-2.5 wt% Cu
601
Fracture surface topography analysis (FRASTA)—Development, accomplishments, and future applications
602
Fracture surface topography analysis of in-beam fatigue behavior for 20% cold-worked 316 stainless steel
603
Fracture surface topography and fracture mechanism in austenitic SUS316 steel plates fatigued by repeated bending
604
Fracture surfaces and compressive strength of hydrated cement pastes
605
Fracture surfaces and the associated failure mechanisms in ductile iron with different matrices and load bearing
606
Fracture Surgery in Known COVID-19 Infected Patients: What Are the Challenges?
607
Fracture susceptibility of worn teeth
608
Fracture system related to geothermal reservoir based on core samples of slim holes. Example from the Uenotai geothermal field, northern Honshu, Japan
609
Fracture systems and dissolution cavities in Wadi As Sir Formation, Thughrat Asfour area, Jordan
610
Fracture systems in normal fault zones crosscutting sedimentary rocks, Northwest German Basin
611
Fracture termination and step-over at bedding interfaces due to frictional slip and interface opening
612
Fracture test of thin sheet electrolytes for solid oxide fuel cells
613
Fracture testing of the heat affected zone from welded steel pipes using an in situ stage
614
Fracture testing of welded single edge notch tensile specimens
615
Fracture tests of microsized TiAl specimens
616
Fracture tolerance of reaction wood (yew and spruce wood in the TR crack propagation system)
617
Fracture toughening mechanism of cortical bone: An experimental and numerical approach
618
Fracture toughening mechanism of shape memory alloys due to martensite transformation
619
Fracture toughening mechanism of shape memory alloys under mixed-mode loading due to martensite transformation
620
Fracture toughness (J1C) of electron beam welded AA2219 alloy
621
Fracture toughness (K1C ) and tensile properties of as-cast and
622
Fracture toughness (KIc) of a dental porcelain determined by fractographic analysis
623
Fracture toughness analysis in transition temperature region of API X70 pipeline steels
624
Fracture toughness analysis of a ductile steel by means of 3D surface displacements
625
Fracture toughness analysis of inclined crack in cylindrical shell repaired with bonded composite patch
626
Fracture toughness analysis of laser-beam-welded superalloys Inconel 718 and 625
627
Fracture toughness and adhesion of thermally grown titanium oxide on medical grade pure titanium
628
Fracture toughness and Charpy impact properties of several RAFMS before and after irradiation in HFIR
629
Fracture toughness and compressive properties of cancellous bone at the head of the femur and relationships to non-invasive skeletal assessment measurements
630
Fracture toughness and corrosion behaviour of infiltrated Al2O3|P – Steel composites
631
Fracture Toughness and Crack Resistance of Steam Pipeline Steel in Initial and Used States
632
Fracture toughness and creep performance of PMMA composites containing micro and nanosized carbon filaments
633
Fracture toughness and cyclic fatigue resistance of resin composites with different filler size distributions
634
Fracture toughness and fatigue crack growth characteristics of nanotwinned copper Original Research Article
635
Fracture toughness and fatigue crack propagation in cast irons with spheroidal vanadium carbides dispersed within martensitic matrix microstructure
636
Fracture toughness and fatigue life of MWCNT/epoxy composites
637
Fracture toughness and flexural strength of dental ceramics for titanium
638
Fracture toughness and fracture mechanisms in Mo5SiB2 at ambient to elevated temperatures
639
Fracture toughness and fracture mechanisms of Al-Al2O3 composites at cryogenic and elevated temperatures
640
Fracture toughness and fracture mechanisms of Al-Al2O3 composites at cryogenic and elevated temperatures
641
Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials
642
Fracture toughness and hardness of ceria- and yttria-doped tetragonal zirconia ceramics
643
Fracture Toughness and Impact Strength of Hollow Epoxy Particles-Toughened Polyester Composite
644
Fracture toughness and load relaxation of dentin bonding resin systems
645
Fracture toughness and low cycle fatigue behaviour in boron modified Timetal 834 titanium alloy
646
Fracture toughness and microhardness of a composite: do they correlate?
647
Fracture toughness and residual stress measurements in tempered glass by Hertzian indentation Original Research Article
648
Fracture toughness and strength of Al2O3–Y3Al5O12 and Al2O3–Y3Al5O12–ZrO2 directionally solidified eutectic oxides up to 1900 K
649
Fracture toughness and surface energies of covalent minerals: theoretical estimates
650
Fracture toughness and surface energies of minerals: theoretical estimates for oxides, sulphides, silicates and halides
651
Fracture toughness and temperature dependence of Youngʹs modulus of a sintered albite glass
652
Fracture toughness and tensile properties of nano-structured ferritic steel 12YWT
653
Fracture toughness and thermal resistance of polycrystalline diamond compacts
654
Fracture toughness and thermal resistance of polycrystalline diamond compacts
655
Fracture toughness and water uptake of high-performance epoxy/nanoclay nanocomposites
656
Fracture toughness and wear behavior of NiAl-based nanocomposite HVOF coatings
657
Fracture toughness and wear resistance of aluminum-boron particulate composites cast using metallic and non-metallic chills
658
Fracture toughness and work of fracture of hydrated, dehydrated, and ashed bovine bone
659
Fracture toughness and yield strength of boron-doped, high (Ti+Mn) L12 titanium trialuminides
660
Fracture toughness anisotropy by indentation and SEVNB on tetragonal PZT polycrystals
661
Fracture toughness anisotropy by indentation and SEVNB on tetragonal PZT polycrystals
662
Fracture toughness anisotropy of partially stabilized ZrO2 crystals in the plane (001)
663
Fracture toughness anisotropy of PZT
664
Fracture toughness anisotropy of PZT
665
Fracture toughness assessment of ferritic–martensitic steel in liquid lead–bismuth eutectic
666
Fracture toughness assessment of in-service aged primary circuit elbows using mini-CT specimens taken from outer skin Original Research Article
667
Fracture toughness behavior in the ductile–brittle transition region of the tempered martensitic Eurofer97 steel: Experiments and modeling
668
Fracture toughness behaviour of carbon fibre epoxy composite with Kevlar reinforced interleave
669
Fracture toughness characterization of austempered ductile iron produced using both conventional and two-step austempering processes
670
Fracture toughness characterization of JLF-1 steel after irradiation in HFIR to 5 dpa
671
Fracture toughness comparison of six resin composites
672
Fracture toughness comparison of three test methods with four dental porcelains
673
Fracture toughness determination of composite resin and dentin/composite resin adhesive interfaces by laboratory testing and finite element models
674
Fracture toughness determination of Ti3Si(Al)C2 and Al2O3 using a single gradient notched beam (SGNB) method
675
Fracture toughness determination of two dental porcelains with the indentation strength in bending method
676
Fracture toughness diagrams of a notched body
677
Fracture toughness enhancement of cement paste with multi-walled carbon nanotubes
678
Fracture Toughness Evaluation Based on Tension-softening Model and its Application to Hydraulic Fracturing
679
Fracture toughness evaluation for multidirectional CFRP by the Raman coating method
680
Fracture toughness evaluation of a H.S.L.A. steel
681
Fracture Toughness Evaluation of Hybrid and Nano-hybrid Resin Composites after Ageing under Acidic Environment
682
Fracture toughness evaluation of precursor-derived Si–C–N ceramics using the crack opening displacement approach
683
Fracture toughness evaluation of unidirectional fibre metal laminates using traditional CTOD (δ) and Schwalbe (δ5) methodologies
684
Fracture toughness evaluation using miniature specimen test and neural network
685
Fracture toughness evaluation using Palmqvist crack models on AISI 1045 borided steels
686
Fracture toughness for mixed mode I/II of epoxy resin
687
Fracture toughness for mixed mode I/II of epoxy resin Original Research Article
688
Fracture toughness improvement of austempered high silicon steel by titanium, vanadium and rare earth elements modification
689
Fracture toughness improvement of CFRP laminates by dispersion of cup-stacked carbon nanotubes
690
Fracture toughness improvement of epoxy resins with short carbon fibers
691
Fracture toughness improvement of polyurethane adhesive joints with chopped glass fibers at cryogenic temperatures
692
Fracture toughness improvements of dental ceramic through use of yttria-stabilized zirconia (YSZ) thin-film coatings
693
Fracture Toughness in an Extruded ZK60 Magnesium Alloy
694
Fracture toughness investigations of tungsten alloys and SPD tungsten alloys
695
Fracture toughness master-curve analysis of the tempered martensitic steel Eurofer97
696
Fracture toughness measurement of thin-film silicon
697
Fracture toughness measurement on TiN hard coatings using internal energy induced cracking
698
Fracture Toughness Measurements and Acoustic Emission Activity in Brittle Rocks
699
Fracture toughness measurements of plasma-sprayed thermal barrier coatings using a modified four-point bending method
700
Fracture toughness measurements on igneous rocks using a high-pressure, high-temperature rock fracture mechanics cell
701
Fracture toughness of 2090 Al–Li–Cu extrusions with high and low hydrogen contents
702
Fracture toughness of 2090 Al–Li–Cu extrusions with high and low hydrogen contents
703
Fracture toughness of a ceramic–resin interface
704
Fracture toughness of a composite reinforced with bone-shaped short fibers
705
Fracture toughness of a composite reinforced with bone-shaped short fibers
706
Fracture toughness of a directionally solidified Al–Nb–Ni ternary eutectic
707
Fracture toughness of a high carbon and high silicon steel
708
Fracture toughness of a high carbon and high silicon steel
709
Fracture toughness of a welded duplex stainless steel
710
Fracture toughness of a welded super duplex stainless steel
711
Fracture toughness of acid corroded Y-α-SiAlON ceramics
712
Fracture toughness of Al replicated foam Original Research Article
713
Fracture toughness of Al2O3 fibers with an artificial notch introduced by a focused-ion-beam
714
Fracture toughness of alumina and ZTA ceramics: microstructural coarsening effects
715
Fracture toughness of alumina–zirconia composites
716
Fracture toughness of borides formed on boronized ductile iron
717
Fracture toughness of bovine bone: influence of orientation and storage media
718
Fracture toughness of bovine claw horn from cattle with and without vertical fissures
719
Fracture toughness of carbides in tool steels evaluated by nanoindentation Original Research Article
720
Fracture toughness of ceramics and ceramic composites
721
Fracture toughness of China low activation martensitic (CLAM) steel at room temperature
722
Fracture toughness of closed-cell PVC foam: Effects of loading configuration and cell size
723
Fracture toughness of concentric Si3N4-based laminated structures
724
Fracture toughness of conventional, resin-modified glass–ionomer and composite luting cements
725
Fracture toughness of cross-linked and non-cross-linked temporary crown and fixed partial denture materials
726
Fracture toughness of Cu–EMC interfaces in pressurized steam
727
Fracture toughness of dental ceramics: comparison of bending and indentation method
728
Fracture toughness of difunctional epoxy resin/thermally latent initiator system modified with polyesters
729
Fracture toughness of electron beam welded Ti6Al4V
730
Fracture toughness of epoxy polymer modified with nanosilica particles: Particle size effect
731
Fracture toughness of epoxy/multi-walled carbon nanotube nano-composites under bending and shear loading conditions
732
Fracture toughness of exponential layer-by-layer polyurethane/poly(acrylic acid) nanocomposite films
733
Fracture toughness of foams with tetrakaidecahedral unit cells using finite element based micromechanics
734
Fracture toughness of Friction Hydro-Pillar Processing welding in C–Mn steel
735
Fracture toughness of geopolymeric concretes reinforced with basalt fibers
736
Fracture toughness of glass microsphere-filled polypropylene and polypropylene/poly (ethylene terephthalate-co-isophthalate) blend-matrix composites
737
Fracture toughness of grade D ship steel
738
Fracture toughness of heat cured denture base acrylic resin modified with Chlorhexidine and Fluconazole as bioactive compounds
739
Fracture toughness of heat cured denture base acrylic resin modified with Chlorhexidine and Fluconazole as bioactive compounds
740
Fracture toughness of high density polyethylene/SEBS-g-MA/montmorillonite nanocomposites
741
Fracture toughness of high strength steel—using the notch stress intensity factor and volumetric approach
742
Fracture toughness of hot-pressed Lu2Si2O7–Si3N4 and Lu4Si2O7N2–Si3N4 ceramics and correlation to microstructure and grain-boundary phases
743
Fracture toughness of human bone under tension
744
Fracture toughness of human femoral neck: effect of microstructure, composition, and age
745
Fracture Toughness of HVOF Thermally Sprayed WC-12Co Coating in Optimized Particle Temperature
746
Fracture Toughness of HVOF Thermally Sprayed WC-12Co Coating in Optimized Particle Temperature
747
Fracture toughness of in situ TiCp–AlNp/Al composite
748
Fracture toughness of intermetallic compacts consolidated from nanocrystalline powders
749
Fracture toughness of intermetallic compacts consolidated from nanocrystalline powders
750
Fracture toughness of irradiated and recovered vessel steels Original Research Article
751
Fracture toughness of irradiated modified 9Cr–1Mo steel
752
Fracture toughness of ISO 3183 X80M (API 5L X80) steel friction stir welds
753
Fracture Toughness of Kenaf Mat Reinforced Polyester Composite
754
Fracture toughness of layered structures: Embrittlement due to confinement of plasticity
755
Fracture toughness of manatee rib and bovine femur using a chevron-notched beam test
756
Fracture toughness of medium-high carbon steel for railroad wheel
757
Fracture toughness of medium-high carbon steel for railroad wheel
758
Fracture Toughness of Microfiber Reinforced Cement Composites
759
Fracture toughness of micro-fiber reinforced cement composites
760
Fracture toughness of multiferroic composite materials
761
Fracture toughness of nano- and micro-spherical silica-particle-filled epoxy composites Original Research Article
762
Fracture toughness of nanocrystalline tetragonal zirconia with low yttria content Original Research Article
763
Fracture Toughness of Nanohybrid and Hybrid Composites Stored Wet and Dry up to 60 Days
764
Fracture toughness of nanostructured railway wheels
765
Fracture toughness of natural fibers/castor oil polyurethane composites
766
Fracture toughness of nitramine and composite solid propellants
767
Fracture toughness of nylon 6/organoclay/elastomer nanocomposites
768
Fracture toughness of open-cell Kelvin foam
769
Fracture toughness of PAN-based carbon fibers estimated from strength–mirror size relation Original Research Article
770
Fracture toughness of pea: Weibull analysis Original Research Article
771
Fracture toughness of polycrystalline tungsten under mode I and mixed mode I/II loading
772
Fracture toughness of polycrystalline tungsten under mode I and mixed mode I/II loading
773
Fracture toughness of polycrystalline YCu, DyCu, and YAg
774
Fracture toughness of polymers in shear mode
775
Fracture toughness of recycled AISI 1040 steel chip reinforced AlMg1SiCu aluminum chip composites
776
Fracture Toughness of Resin Composites under Different Modes and Media: Review of Articles
777
Fracture toughness of resin-modified glass ionomer restorative materials: effect of powder/liquid ratio and powder particle size reduction on fracture toughness
778
Fracture toughness of rubber-modified epoxy adhesives: effect of plastic deformability of the matrix phase
779
Fracture toughness of rubber-modified epoxy adhesives: effect of plastic deformability of the matrix phase
780
Fracture toughness of silicon nitride thin films of different thicknesses as measured by bulge tests Original Research Article
781
Fracture toughness of solar-sintered WC with Co additive
782
Fracture toughness of some high density PM steels
783
Fracture toughness of spherical silica-filled epoxy adhesives
784
Fracture toughness of spherical silica-filled epoxy adhesives
785
Fracture toughness of the +45◦ / − 45◦ interface of a laminate composite
786
Fracture toughness of the heat affected zone on Nd-YAG laser welded joints
787
Fracture toughness of the hydrogen charged EUROFER 97 RAFM steel at room temperature and 120 °C
788
Fracture toughness of the nano-particle reinforced epoxy composite
789
Fracture toughness of the tensile and compressive fibre failure modes in laminated composites
790
Fracture toughness of thermoset composites reinforced by perfectly bonded impenetrable short fibers
791
Fracture toughness of thick-section weld joint of SUS 316 at cryogenic temperature
792
Fracture toughness of thixotropic and room temperature cured epoxy-based adhesives for in situ timber bonding
793
Fracture toughness of Ti–15Al–8Nb alloy under mixed mode I/III loading
794
Fracture toughness of titanium foams for medical applications
795
Fracture toughness of transverse cracks in graphite/epoxy laminates at cryogenic conditions
796
Fracture toughness of two dentin adhesives
797
Fracture toughness of two-dimensional cellular material with periodic microstructure
798
Fracture toughness of unidirectional fiber–metal laminates: crack orientation effect
799
Fracture Toughness of Warm Mix Asphalts Containing Reclaimed Asphalt Pavement
800
Fracture toughness of water-aged resin composite restorative materials
801
Fracture toughness of weft-knitted fabric composites
802
Fracture toughness of welds—effect of brittle zones and strength mismatch
803
Fracture Toughness of Wood Fiber Gypsum Panels from Size Effect Law
804
Fracture toughness of α- and β-phase polypropylene homopolymers and random- and block-copolymers
805
Fracture toughness potential of cast Al–7%Si–Mg alloys
806
Fracture toughness prediction for highly irradiated RPV materials: From test results to RPV integrity assessment
807
Fracture toughness prediction of a valve body: Numerical analysis
808
Fracture toughness prediction of low alloy steel as a function of specimen notch root radius and size constraints
809
Fracture toughness properties in the transition region of the Eurofer97 tempered martensitic steel
810
Fracture toughness studies on V-notched ceramic specimens
811
Fracture toughness testing of brittle materials using semi-circular bend (SCB) specimen
812
Fracture toughness transition curve estimation from a notched round bar specimen using the local approach method Original Research Article
813
Fracture toughness variability of foamed alumina cements
814
Fracture toughness variability of structural steel
815
Fracture toughness versus micro-tensile bond strength testing of adhesive–dentin interfaces
816
Fracture toughness, strength and creep of transparent ceramics at high temperature
817
Fracture toughness, strength and slow crack growth in a ceria stabilized zirconia–alumina nanocomposite for medical applications
818
Fracture toughness, strength and thermal shock behaviour of bulk plasma sprayed alumina — effects of heat treatment
819
Fracture transmissivity as a function of normal and shear stress: First results in Opalinus Clay
820
Fracture types and thickness distribution in superplastic sheets formed with plastic injection molding
821
Fracture verification of fine grain isotropic graphites containing imitative defects subsequent to round robin test of non-destructive inspection Original Research Article
822
Fracture Width Logging While Drilling and Drilling Mud/Loss-Circulation-Material Selection Guidelines in Naturally Fractured Reservoirs
823
Fracture Width Logging While Drilling and Drilling Mud/Loss-Circulation-Material Selection Guidelines in Naturally Fractured Reservoirs
824
Fracture zone-scale variation of trace elements and stable isotopes in calcite in a crystalline rock setting
825
Fracture, fatigue and environmentally-assisted failure of a Zr-based bulk amorphous metal
826
Fracture-aperture size—frequency, spatial distribution, and growth processes in strata-bounded and non-strata-bounded fractures, Cambrian Mesón Group, NW Argentina
827
FractureassessmentofabrittleRPVundercoldloadingOriginalResearchArticle
828
Fracture-controlled fluid circulation and dissolutional weathering in sinkhole-prone carbonate rocks from central Italy
829
Fracture-controlled gas hydrate systems in the northern Gulf of Mexico
830
Fracture-controlled paleohydrology in a map-scale detachment fold: Insights from the analysis of fluid inclusions in calcite and quartz veins
831
Fractured and Embolized Coronary Stent Mimicking Significant Internal Carotid Stenosis
832
Fractured carbonate reservoirs sweep efficiency improvement using microbial biomass
833
Fractured clavicle and Erbʹs palsy unrelated to birth trauma, ,
834
FRACTURED GOVERNANCE AND LOCAL FRICTIONS: THE EXCLUSIONARY NATURE OF A CLANDESTINE LAND MARKET IN SOUTHERN ZAMBIA
835
Fractured neck of femur and vitamin D levels in southern Tasmania
836
Fractured Reservoirs History Matching based on Proxy Model and Intelligent Optimization Algorithms
837
Fractured rheumatoid elbow: Treatment with souter elbow arthroplasty—A clinical and radiologic midterm follow-up study
838
Fractured rib, pleural effusion, and ascites
839
Fractured rock mass characterization parameters and seismic properties: Analytical studies
840
Fractured surface characterization: wet versus dry bonding
841
Fractured surgical instruments located using radiographs of the suction bottle
842
Fractured-controlled fluid flow and metasomatism in the contact aureole of the Marulan Batholith (New South Wales, Australia)
843
Fracture-dislocation at C6-C7 level with Quadriplegia after Traditional Massage in a Patient with Ankylosing Spondylitis: A Case Report
844
Fracture-Dislocation of the Thoracic Spine without Any Neurological Deficit: A Case Report and Review of the Literature
845
Fracture-dislocations of the proximal ulna
846
Fracture-embolization of Duromedics valve prosthesis and microscopic uncommon lesions
847
FRACTURE-FILLING CEMENTS IN THE PALAEOZOIC WARBURTON BASIN, SOUTH AUSTRALIA
848
Fracture-induced activation in mechanophore-linked, rubber toughened PMMA
849
Fracture-induced and thermal decomposition of NTO using laser ionization mass spectrometry
850
Fracture-induced change in the internal energy of silicate glasses
851
Fracture-induced formation of semi-concentric patterns on polymeric films
852
Fracture-induced Physical Phenomena and Memory Effects in Rocks: A Review
853
Fracture-mechanics failure criteria for RC beams strengthened with FRP strips––a simplified approach
854
Fractures – A Preventable Hazard of Racing Thoroughbreds
855
Fractures – A Preventable Hazard of Racing Thoroughbreds?
856
Fractures and drainage in the granite mountainous area: A study from Sierra Nevada, USA
857
Fractures and other injuries from falls after an ice storm
858
Fractures and recurrent fractures in children; varying effects of environmental factors as well as bone size and mass
859
Fractures are not in genes
860
Fractures are not in genes – Authorsʹ reply
861
Fractures around Trochanteric Nails: The “VergiliusClassification System
862
Fractures following thyroidectomy in women: a population-based cohort study
863
Fractures in a trachyandesitic lava at Öræfajökull, Iceland, used to infer subglacial emplacement in 1727–8 eruption
864
Fractures in childhood chronic disease: Lessons from population-based cohorts
865
Fractures in Corticosteroid- and Bisphosphonate-Treated Subjects With Longstanding Rheumatoid Arthritis and Systemic Lupus Erythematosus
866
Fractures in non-homogeneous rockfill materials from a micromechanics perspective
867
Fractures in Single-humped Camels: A retrospective Study of 220 Cases (2008-2009)
868
Fractures in the elderly: epidemiology and demography
869
Fractures in the low porosity and ultra-low permeability glutenite reservoirs: A case study of the late Eocene Hetaoyuan formation in the Anpeng Oilfield, Nanxiang Basin, China
870
Fractures of lacustrine shale reservoirs, the Zhanhua Depression in the Bohai Bay Basin, eastern China
871
Fractures of the acromion and the lateral scapular spine
872
Fractures of the coronoid: morphology based upon computer tomography scanning
873
Fractures of the mandible and zygomatic complex—Postoperative radiographs are not necessary
874
Fractures of the mandibular condyle. Part 1: Patterns of distribution of types and causes of fractures in 348 patients
875
Fractures of the mandibular condyle. Part 2: Results of treatment of 348 patients
876
Fractures of the medial end of the clavicle
877
Fractures sustained by racehorses in Japan during flat racing with special reference to track condition and racing time
878
Fractures, epilepsy, and antiepileptic drugs
879
Fractures, faults, and hydrocarbon entrapment, migration and flow
880
Fractures, Fluid Flow and Mineralization: Geological Society Special Publication No. 155, 1999, ISBN 1-86239-034-7, 328 pp., £69.00 (UK), $115 (US), GSL price=£35.00 (UK), $58 (US), AAPG/SEPM/GSA=£40.00 (UK), $70 (US)
881
Fractures, fractals and breakage energy of mineral particles
882
Fractures, hydrothermal alterations and permeability in the Soultz Enhanced Geothermal System
883
Fracture-toughening mechanisms responsible for differences in work to fracture of hydrated and dehydrated dentine
884
FracturetoughnessofweldedjointsmaterialsformainpipelinesatIgnalinaNPPOriginalResearchArticle
885
Fracturing and cementation of shallow buried Miocene proximal alluvial fan deposits
886
Fracturing around a preconditioned deep level gold mine stope
887
Fracturing as a quantitative indicator of lava flow dynamics
888
Fracturing behaviors of FRP-strengthened concrete structures
889
Fracturing control method for deep volcanic rock gas reservoirs in Daqing exploration area
890
Fracturing in saturated rocks undergoing triaxial deformation using complex electrical conductivity measurements: experimental study
891
Fracturing in saturated rocks undergoing triaxial deformation using complex electrical conductivity measurements: experimental study
892
Fracturing of Etnean and Vesuvian rocks at high temperatures and low pressures
893
Fracturing of garnet crystals in anisotropic metamorphic rocks during uplift
894
Fracturing of garnet crystals in anisotropic metamorphic rocks during uplift: Discussion
895
Fracturing of garnet crystals in anisotropic metamorphic rocks during uplift: Reply
896
Fracturing of volcanic systems: Experimental insights into pre-eruptive conditions
897
Fracturing patterns, stress fields and earthquakes in the Southern Dead Sea rift
898
Fracturing Rate Effect and Creep in Microplane Model for Dynamics
899
Fracturing Rigid Materials
900
Fracturing Rings to Understand Lantibiotics
901
Fracturing unconventional formations to enhance productivity
902
Fracturing with carbon dioxide: Application status and development trend
903
Fraenkelʹs conjecture for six sequences Original Research Article
904
Fragile black holes and an angular momentum cutoff in peripheral heavy ion collisions Original Research Article
905
Fragile black holes Original Research Article
906
Fragile dominion: complexity and the commons: By Simon Levin, Perseus Publishing, Cambridge, MA, 1999, 250 pp. ISBN 0738201111
907
FRAGILE ECOSYSTEMS AND SCARCE RESOURCES MEET GROWING FOOD DEMAND: IS “BUSINESS AS USUAL” LAND USE AN APPROPRIATE LONG-TERM SOLUTION FOR THE ALPINE COUNTRIES?
908
Fragile environments: people and tourism
909
Fragile erections: Ecology of Insects: Concepts and Applications by M.R. Speight, M.D. Hunter and A.D. Watt
910
Fragile Families and Child Wellbeing
911
FRAGILE FIBER3, an Arabidopsis Gene Encoding a Type II Inositol Polyphosphate 5-Phosphatase, Is Required for Secondary Wall Synthesis and Actin Organization in Fiber Cells
912
Fragile image watermarking using a gradient image for improved localization and security
913
Fragile landscape systems
914
Fragile landscapes, fragile civilizations — How climate determined societies in the pre-Columbian south Peruvian Andes
915
Fragile lives in fragile ecosystems : International Rice Research Institute (IRRI), Manila, Philippines, 1995. 976 pp. Price: HDC US $165.00, LDC US $43.00 (paperback). ISBN 971 22 0073 6
916
Fragile self-esteem and affective instability in posttraumatic stress disorder
917
Fragile sites and bladder cancer
918
Fragile Southeast Asian biotas
919
Fragile State Discourse in International Relations: Reasons and Approaches
920
Fragile States: the Birthplace of Non-State Armed Groups in West Asia
921
Fragile structured layers on surfaces detected by dynamic atomic force microscopy in aqueous electrolyte solutions
922
Fragile structured layers on surfaces in highly concentrated solutions of electrolytes of various valencies
923
Fragile truth
924
Fragile watermarking tamper detection with images compressed by fuzzy transform
925
Fragile words and Cayley type transducers
926
Fragile X – A challenge to models of the mind and to best clinical practice
927
Fragile X Mental Retardation Protein is Reduced in Cerebella of Subjects with Autism
928
Fragile X Mental Retardation Protein Targets G Quartet mRNAs Important for Neuronal Function
929
Fragile X Mental Retardation Syndrome: Structure of the KH1-KH2 Domains of Fragile X Mental Retardation Protein
930
Fragile X premutations in familial premature ovarian failure
931
Fragile X Syndrome Secondary to in Vitro Fertilization with a Family Egg Donor, A Case Report and Review of the Literature
932
Fragile-X syndrome and fragile X-associated tremor/ataxia syndrome: two faces of FMR1
933
Fragility – Density of state and relaxation processes in polymeric materials
934
Fragility Analysis for Performance-Based Seismic Design of Engineered Wood Shearwalls
935
Fragility Analysis for Performance-Based Seismic Design of Engineered Wood Shearwalls
936
Fragility analysis of bridges under ground motion with spatial variation
937
Fragility Analysis of Concrete Gravity Dams
938
Fragility analysis of flat-slab structures
939
Fragility analysis of mid-rise R/C frame buildings
940
Fragility analysis of nonlinear soil-structure systems including foundation uplifting and soil yielding
941
Fragility analysis of RC bridges considering spatially varying ground motions and SSI
942
Fragility analysis of steel and concrete wind turbine towers
943
Fragility analysis of steel moment frames with various seismic connections subjected to sudden loss of a column
944
Fragility analysis of track-on steel-plate-girder railway bridges in Korea
945
Fragility analysis of woodframe buildings considering combined snow and earthquake loading
946
Fragility and crash over-representation among older drivers in Western Australia
947
Fragility and glass transition for binary mixtures of 1,2-propanediol and LiBF4
948
Fragility and molecular mobility in micro- and nano-layered PC/PMMA films
949
Fragility assessment for roof sheathing failure in high wind regions
950
Fragility characterization by neutron scattering for pure homologous disaccharides
951
Fragility correlates thermodynamic and kinetic properties of glass forming liquids
952
Fragility Curve Development for Assessing Midrise Steel Building with Buckling Resistant Braced System Having Vertical Irregularity
953
Fragility Curves Derivation for a Pile-Supported Wharf
954
Fragility curves for building envelope components subject to windborne debris impact
955
Fragility curves for isolated bridges in eastern Canada using experimental results
956
FRAGILITY CURVES FOR REINFORCED CONCRETE FRAMES WITH LAP-SPLICED COLUMNS
957
fragility curves for steel moment frame with welded flange plate connection
958
FRAGILITY CURVES FOR STRUCTURES EQUIPPED WITH OPTIMAL SATMDs
959
Fragility Curves for Vulnerability Assessment of Steel Moment-Resisting Frames Adjacent to Slopes
960
Fragility curves of typical as-built highway bridges in eastern Canada
961
Fragility estimation for seismically isolated nuclear structures by high confidence low probability of failure values and bi-linear regression Original Research Article
962
Fragility fractures and low bone density described for the first time in unbalanced translocation t(9;14)
963
Fragility functions for low aspect ratio reinforced concrete walls
964
Fragility functions for pre-Northridge welded steel moment-resisting beam-to-column connections
965
Fragility index of block tailed vectors
966
Fragility index of drawn or annealed poly(ethylene terephthalate) films studied by thermally stimulated depolarisation currents
967
Fragility measures and mode-coupling theory
968
Fragility of Bench-Mounted Equipment Considering Uncertain Parameters
969
Fragility of liquids using percolation-based transport theories: Correlation between limiting slope of the viscosity and non-exponentiality of relaxation
970
Fragility of metallic glass-forming liquids: A simple thermodynamic connection
971
Fragility of multixenobiotic resistance in aquatic organisms enhances the complexity of risk assessment
972
Fragility of superheated melts in Al–RE (Ce, Nd, Pr) alloy system
973
Fragility of unsaturated polyester resins cured with styrene: influence of the styrene concentration
974
Fragility of Western Mediterranean landscapes during Holocene Rapid Climate Changes
975
Fragility parameter and nanocrystallization of metallic glasses
976
Fragility parameter and nanocrystallization of metallic glasses
977
Fragility problem revisited: overview and reformulation
978
Fragility relationships for torsionally-imbalanced buildings using three-dimensional damage characterization
979
Fragility versus excessive crash involvement as determinants of high death rates per vehicle-mile of travel among older drivers
980
Fragility, fear of falling, physical activity and falls among older persons: Some theoretical considerations to interpret mediation
981
Fragility, thermodynamic properties, and thermal stability of Pd-rich glass forming liquids
982
Fragility, thermodynamic properties, and thermal stability of Pd-rich glass forming liquids
983
Fragility-based assessment of public buildings in Turkey
984
Fragility-based assessment of typical mid-rise and low-rise RC buildings in Turkey
985
Fragility-based assessment of typical mid-rise and low-rise RC buildings in Turkey
986
Fragilome: Determining the role of fragile sites in human disease
987
Fragipan controls on runoff generation: Hydropedological implications at landscape and watershed scales
988
Fragipan horizon degradation and bleached tongues formation in Albeluvisols of the Carpathian Foothills, Poland Original Research Article
989
Fragment analysis of the p53 gene in ovarian tumors
990
Fragment C tetanus toxin: A putative activity-dependent neuroanatomical tracer
991
Fragment characteristics from fission of 238U and 234U induced by 6.5–9.0 MeV bremsstrahlung
992
Fragment complementation for the co-refolding of Thermotoga maritima β-glucosidase by gene splitting at non-homologous region
993
Fragment constant method for prediction of fish bioconcentration factors of non-polar chemicals
994
Fragment detection system for studies of exotic neutron-rich nuclei
995
Fragment detection system for studies of exotic neutron-rich nuclei
996
Fragment Distribution Analysis of Proton-Induced Reactions with Intermediate Energy Using Quantum Molecular Dynamics Plus Fission Models
997
Fragment distribution of thermal decomposition for lignin monomer by QMD calculations using the excited and charged model molecules
998
Fragment distribution of thermal decomposition for PS and PET with QMD calculations by considering the excited and charged model molecules
999
Fragment distributions for brittle rods with patterned breaking probabilities
1000
Fragment fixation with a bone graft and dynamic staples for osteochondritis dissecans of the humeral capitellum
