<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Influence of life-history parameters on organochlorine concentrations in free-ranging killer whales žOrcinus orca/ from Prince William Sound, AK
2
Influence of lifestyle factors and stress on the radioallergosorbent test scores: two case reports
3
Influence of lifestyle modification on arterial stiffness and wave reflections
4
Influence of Lifestyle on Overweight and Obesity in School-age Children
5
Influence of lifestyle, health, and work environment on smoking cessation among Danish nurses followed over 6 years
6
Influence of ligament stiffness on the mechanical behavior of a functional spinal unit
7
Influence of ligand and solvent on characters of ZnTe clusters
8
Influence of ligand architecture on the structure of coordination centre in dimeric europium carboxylates with 1,10-phenanthroline
9
Influence of ligand density on antibody binding capacity of cation-exchange adsorbents
10
Influence of ligand structure and water interactions on the physical properties of β-cyclodextrins complexes
11
Influence of ligands on the image isomerization in [RuCl3(NO)(P–P)] complexes, [P–P = R2P(CH2)nPR2 (n = 1–3) and R2P(CH2)POR2, PR2–CHdouble bond; length as m-dashCH–PR2, R = Ph and (C6H11)2P-(CH2)2-P(C6H11)2]
12
Influence of ligands on the photoluminescent properties of Eu3+ in europium β-diketonate/PMMA-doped systems
13
Influence of ligands’ peripheral substituents on the structure, magnetochemical and electrochemical behaviour of complexes containing a Cu2O2 butterfly core
14
Influence of light absorption rate by Nannochloropsis oculata on triglyceride production during nitrogen starvation
15
Influence of light and feeding conditions on swimming activity rhythms of larval and juvenile turbot: Scophthalmus maximus L.: An experimental study
16
Influence of light conditions on the release of volatile halocarbons by Antarctic macroalgae
17
Influence of light fluctuation on occupant visual perception
18
Influence of light handrail use on the biomechanics of stair negotiation in old age
19
Influence of light history on the photosynthetic and motility responses of Gymnodinium chlorophorum exposed to UVR and different temperatures
20
Influence of light intensity on diatom physiology and nutrient dynamics in the Oyashio region
21
Influence of Light Intensity on Lucky Bamboo Growth (Dracaena sanderiana)
22
Influence of light intensity on two restorative systems
23
Influence of light irradiation of dentine primers on dentine-resin bond
24
Influence of light irradiation on the volumetric change of polyacid-modified resin composites
25
Influence of light on food relevant fungi with emphasis on ochratoxin producing species
26
Influence of light on growth, fumonisin biosynthesis and FUM1 gene expression by Fusarium proliferatum
27
INFLUENCE OF LIGHT ON THE HEMATOLOGY, LYMPHOID ORGANS AND PRODUCTION OF THE BROILERS
28
Influence of light scattering of residual silica particles on the estimation of surfactants adsorption by spectrometry
29
Influence of light scattering particles in the TiO2 photoelectrode for solid-state dye-sensitized solar cell
30
Influence of light, temperature and metallic ions on biodiesel degradation and corrosiveness to copper and brass
31
Influence of light, temperature, salinity and storage on seed germination of Haloxylon ammodendron
32
Influence of light-enhanced glycoalkaloids on resistance of potato tubers to Fusarium sulphureum and Fusarium solani var. coeruleum
33
Influence of lightning electric field components on the induced voltages on a power distribution line
34
Influence of lightweight aggregate on the microstructure and durability of mortar
35
Influence of ligninolytic enzymes on straw saccharification during fungal pretreatment
36
Influence of lignite composition on thermal power plant performance: Part 1: Theoretical survey
37
Influence of lignite composition on thermal power plant performance: Part 2: Results of tests
38
Influence of lignite on metabolic activity of natural soil microflora in laboratory microcosm
39
Influence of lignite quality on airborne emissions from power generation in the Russian Far East and in Northern Thailand
40
Influence of Lignocaine Hydrochloride with Adrenaline on Free Active Chlorine Content of Sodium Hypochlorite Solution Admixed in Various Proportions
41
Influence of lignosulfonate on crystal structure and productivity of bacterial cellulose in a static culture
42
Influence of likelihood function choice for estimating crop model parameters using the generalized likelihood uncertainty estimation method
43
Influence of limestone addition on calcium leaching mechanisms in cement-based materials
44
Influence of limestone addition on the behaviour of NO and N2O during fluidised bed coal combustion
45
Influence of limestone and anhydrite on the hydration of Portland cements
46
Influence of limestone and slag on the pore structure of cement paste based on mercury intrusion porosimetry and water vapour sorption measurements
47
Influence of limestone content, gypsum content and fineness on early age properties of Portland limestone cement produced by inter-grinding
48
Influence of limestone filler and viscosity-modifying admixture on the porous structure of self-compacting concrete
49
Influence of limestone filler and viscosity-modifying admixture on the shrinkage of self-compacting concrete
50
Influence of limestone on the hydration of Portland cements
51
Influence of limestone particle size on performance and egg quality in laying hens aged 24–36 weeks and 56–68 weeks
52
Influence of limestone powder used as filler in SCC on hydration and microstructure of cement pastes
53
Influence of liming on metal sequestration in lake sediments over recent decades Original Research Article
54
Influence of liming on the epigeic spider (Araneae) community of the Krušné hory Mts. (Czech Republic)
55
Influence of liming, phosphorus fertilization and toxic doses of Cd i Zn on content of zinc in maize (Zea mays L.)
56
Influence of limited fall protein supplementation on performance and forage utilization by beef cattle grazing low-quality native grass pastures
57
Influence of linear alkylbenzene sulfonate (LAS) as organic cosolvent on leaching behaviour of PCDD/Fs from fly ash and soil
58
Influence of Linear Butenes in the Dimerization of Isobutene
59
Influence of linear reciprocating and multi-directional sliding on PEEK wear performance and transfer film formation
60
Influence of linoleic acid, pH and HRT on anaerobic microbial populations and metabolic shifts in ASBRs during dark hydrogen fermentation of lignocellulosic sugars
61
Influence of lipase and/or emulsifier addition on the ileal and faecal nutrient digestibility in growing pigs fed diets containing 4% animal fat
62
Influence of lipid composition on physicochemical properties of nanoliposomes encapsulating natural dipeptide antioxidant l-carnosine
63
Influence of lipid type on water and fat mobility in fermented sausages studied by low-field NMR
64
Influence of lipidation of GBV-C/HGV NS3 (513–522) and (505–514) peptide sequences on its interaction with mono and bilayers
65
Influence of lipoic acid on testicular toxicity induced by bi-n-butyl phthalate in rats
66
Influence of lipophilic anionic compounds on the selectivity of ion-selective electrodes based on podands with phosphoryl complexing groups Original Research Article
67
Influence of lipophilicity on drug–cyclodextrin interactions: A calorimetric study
68
Influence of lipoprotein lipase and hepatic lipase on the transformation of VLDL and HDL during lipolysis of VLDL Original Research Article
69
Influence of lipoprotein lipase serine 447 stop polymorphism on tracking of triglycerides and HDL cholesterol from childhood to adulthood and familial risk of coronary artery disease: the Bogalusa Heart Study
70
Influence of lipoprotein(a) plasma concentration on neointimal growth in a monkey model of vascular injury Original Research Article
71
Influence of Liposomes and Niosomes on the In Vitro Permeation and Skin Retention of Finasteride
72
Influence of liquid and gas flow rates on sulfuric acid mist removal from air by packed bed tower
73
Influence of liquid binder dispersion on agglomeration in an intensive mixer
74
Influence of liquid crystalline ordering on the properties of selected cured nematic epoxy materials
75
Influence of liquid environment on the properties of laser ablation produced tungsten nanostructures
76
Influence of liquid films on mercury vapor loss from dental amalgam
77
Influence of liquid holding recovery and photoreactivation on survival of ultraviolet-irradiated fish pathogenic bacteria
78
Influence of liquid lead and lead–bismuth eutectic on tensile, fatigue and creep properties of ferritic/martensitic and austenitic steels for transmutation systems
79
Influence of liquid limit and slaking on cement stabilized clayey admixtures
80
Influence of liquid nitrogen quenching on the evolution of metastable phases during plasma spraying of (ZrO2–5 wt.% Y2O3)–20 wt.% Al2O3 coatings
81
Influence of Liquid Phase on Grain Growth of Ba0.998La0.002TiO3 Ceramics
82
Influence of liquid properties on flow regime and backmixing in a special bubble column
83
Influence of liquid receiver on the performance of reversible heat pumps using refrigerant mixtures
84
Influence of liquid refrigerant injection on the performance of an inverter-driven scroll compressor
85
Influence of liquid supplement delivery method on forage and supplement intake by grazing beef cows1
86
Influence of liquid surface tension (surfactants) on bubble formation at rigid and flexible orifices
87
Influence of liquid-phase inclusion on high-temperature deformation behavior in Al-Bi alloys
88
Influence of liquid-phase inclusion on high-temperature deformation behavior in Al-Bi alloys
89
Influence of Listeria innocua on the attachment of Listeria monocytogenes to stainless steel and aluminum surfaces
90
Influence of Listeria innocua on the growth of Listeria monocytogenes
91
Influence of lithium chloride on the morphology of flexible slabstock polyurethane foams and their plaque counterparts
92
Influence of lithium chloride, lithium bromide and lithium fluoride additives on performance of polyethersulfone membranes and its application in the treatment of palm oil mill effluent Original Research Article
93
Influence of lithium coatings with large-area coverage on EAST plasma performance
94
Influence of lithium hydroxide on alkali–silica reaction
95
Influence of lithium oxide additives on densification and ionic conductivity of garnet-type Li6.75La3Zr1.75Ta0.25O12 solid electrolytes
96
Influence of lithium oxide as auxiliary flux on the properties of triaxial porcelain bodies
97
Influence of lithium phosphate concentration and temperature on the electrical conduction of (76V2O5–24P2O5)1−X (Li3PO4)X glasses Original Research Article
98
Influence of lithium potassium zirconate nanoparticles on the electrical properties and structural characteristics of poly(vinyl alcohol) films Original Research Article
99
Influence of lithium sulfate addition on the properties of Portland cement paste
100
Influence of lithium-based products proposed for counteracting ASR on the chemistry of pore solution and cement hydrates
101
Influence of lithology and compaction on the pore size distribution and modelled permeability of some mudstones from the Norwegian margin
102
Influence of litter chemistry and stoichiometry on glucan depolymerization during decomposition of beech (Fagus sylvatica L.) litter
103
Influence of litter chemistry and stoichiometry on glucan depolymerization during decomposition of beech (Fagus sylvatica L.) litter
104
Influence of liver failure, ascites, and energy expenditure on the response to oral nutrition in alcoholic liver cirrhosis
105
Influence of livestock grazing on C sequestration in semi-arid mixed-grass and short-grass rangelands
106
Influence of lixiviation by irrigation water on residual shear strength of weathered red mudstone in Northwest China: Implication for its role in landslidesʹ reactivation
107
Influence of LN2 substrate cooling on optical properties of laser-pulse-deposited oxide films
108
Influence of load and carrying methods on gait phase and ground reactions in children’s stair walking
109
Influence of load and deformation-controlled multiaxial tests on fatigue life to crack initiation
110
Influence of load and elastic properties on the rolling and sliding friction of lubricated compliant contacts
111
Influence of load and temperature on the dry sliding behaviour of Al-based metal-matrix-composites against friction material
112
Influence of Load Carriage on Electromyographic Activities of Upper Fibers of Trapezius in School Students During Walking
113
Influence of Load Carriage on the Gait Characteristics of the Obese
114
Influence of load carrying on loads in internal spinal fixators
115
Influence of load characteristics on the power/voltage stability of HVDC systems. I. Basic equations and relationships
116
Influence of load characteristics on the power/voltage stability of HVDC systems. II. Stability margin sensitivity
117
Influence of Load Dependency and Coating Anisotropy on Calculated Youngs Modulus of TBCs by Indentation Test
118
Influence of load frequency and ageing heat treatment on fatigue crack propagation rate of as-extruded AZ61 alloy
119
Influence of load on operating conditions of third harmonic ground-fault protection system of unit connected generators
120
Influence of load on the tribological conditions in piston ring and cylinder liner contacts in a medium-speed diesel engine
121
Influence of load shape on dynamic response of cross-stiffened deck subjected to in-plane impact
122
Influence of loading conditions on the impact damage resistance of composite panels
123
Influence of loading duration on the start-up friction in synovial joints: measurements using a robotic system
124
Influence of loading frequency on high cycle fatigue properties of b.c.c. and h.c.p. metals
125
Influence of loading frequency on high cycle fatigue properties of b.c.c. and h.c.p. metals
126
Influence of loading frequency on implant failure under cyclic fatigue conditions
127
Influence of loading frequency on the high cycle fatigue properties of AlZnMgCu1.5 aluminium alloy
128
Influence of loading frequency on the high cycle fatigue properties of AlZnMgCu1.5 aluminium alloy
129
Influence of loading path on the plastic instability strain in anisotropic plane sheets
130
Influence of loading rate and cable migration on fiberoptic measurement of tendon force
131
Influence of loading rate on concrete cone failure
132
Influence of loading rate on dynamic fracture behavior of fiber-reinforced composites
133
Influence of loading rate on hardening process of Al–Zn metal layered composite
134
Influence of loading rate on shear fracture toughness for failure mode transition
135
Influence of loading rate on the delamination response of untufted and tufted carbon epoxy non crimp fabric composites: Mode I
136
Influence of loading rate on the delamination response of untufted and tufted carbon epoxy non-crimp fabric composites/Mode II
137
Influence of loading rates on production and characteristics of retentate from a biofilm membrane bioreactor (BF-MBR) Original Research Article
138
Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck
139
Influence of load-non-uniformity and eccentricity on the stability and load carrying capacity of orthotropic tubular columns of regular hexagonal cross-section
140
Influence of lobeline on catecholamine release from the isolated perfused rat adrenal gland
141
Influence of local air flow regimes on the ozone content of two Pyrenean valleys
142
Influence of local air velocity from air conditioner evaluated by salivary and skin biomarkers
143
Influence of local anaesthesia on pain and distress induced by two bloodless castration methods in young lambs
144
Influence of local anaesthetics on inflammatory activity postburn
145
Influence of local and external processes on the annual nitrogen cycle and primary productivity on Georges Bank: A 3-D biological–physical modeling study
146
Influence of local and regional publications in the production of public health research papers in Latin America
147
Influence of local and regional sources on the observed spatial and temporal variability of size resolved atmospheric aerosol mass concentrations and water-soluble species in the Athens metropolitan area
148
Influence of local anesthetics on the phosphatidylcholine model membrane: small-angle synchrotron X-ray diffraction and neutron scattering study Original Research Article
149
Influence of local anesthetics with or without epinephrine 1/80000 on blood pressure and heart rate: A randomized double-blind experimental clinical trial
150
Influence of local chemical segregation on the γ′ directional coarsening behavior in single crystal superalloy CMSX-4
151
Influence of local crystallographic orientation on short crack propagation in high cycle fatigue of 316LN steel
152
Influence of local delivery of the protein tyrosine kinase receptor inhibitor tyrphostin-47 on smooth-muscle cell proliferation in a rat carotid balloon-injury model, ,
153
Influence of local effects in three phase flows on power input in Jet-Loop Reactors
154
Influence of local environmental, social, economic and political variables on the spatial distribution of residential solar PV arrays across the United States
155
Influence of local factors in the relationship between mortality and heat waves: Castile-La Mancha (1975–2003) Original Research Article
156
Influence of local fracture energy distribution on maximum fracture load of three-point-bending notched concrete beams
157
Influence of local mechanical loading paths on the oxidation assisted crack initiation of alloy 718
158
Influence of local molecular motions on the determination of 1H–1H internuclear distances measured by 2D 1H spin-exchange experiments
159
Influence of local soil conditions on mouldboard ploughshare abrasive wear
160
Influence of local sources and topography on air quality and rainwater composition in Cubatمo and Sمo Paulo, Brazil
161
Influence of local sources on rainwater chemistry over Pune region, India
162
Influence of local wind speed and direction on wind power dynamics – Application to offshore very short-term forecasting
163
Influence of local wrinkling on membrane behaviour: A new approach by the technique of slowly variable Fourier coefficients
164
Influence of localised double suction on a turbulent boundary layer
165
Influence of localized deformation on A-286 austenitic stainless steel stress corrosion cracking in PWR primary water
166
Influence of localized edema on whole-body and segmental bioelectrical impedance
167
Influence of localized imperfection and surface-parallel shear modulus nonlinearity on the instability of a thin cross-ply cylindrical shell under external pressure
168
Influence of localized imperfection on the instability of isotropic/cross-ply cylindrical shells/rings under external pressure
169
Influence of localized imperfections on the buckling of cylindrical shells under axial compression
170
Influence of localized plasticity on oxidation behaviour of austenitic stainless steels under primary water reactor
171
Influence of localized surface plasmon excitation in silver nanoparticles on the performance of silicon solar cells
172
Influence of localized surface plasmon resonance on shape changes of nanostructures: Investigation using metal nanoblocks in halide solutions
173
Influence of Locally Sourced Additives on Neem Plant Organic Fertilizer Quality in Samaru, Zaria, Kaduna State, Nigeria
174
Influence of location factors on establishment and ownership of foreign investments: The case of the Japanese manufacturing firms in Europe
175
Influence of Lode’s angle on the pore pressure generation in soils
176
Influence of long term annealing on grain boundary character distributions in nickel
177
Influence of long term exposure to space flight on tomato seeds Original Research Article
178
Influence of long term oxidation on the microstructure, mechanical and electrical properties of pressureless sintered AlN–SiC–MoSi2 ceramic composites
179
Influence of long-chain branching on linear viscoelastic flow properties and dielectric relaxation of polycarbonates
180
Influence of long-distance running on plantar pressure pattern
181
Influence of longitudinal electric field on the oscillating magnetocaloric effect of graphenes
182
Influence of longitudinal magnetic field on current distribution and AC loss in twisted multifilamentary high Tc superconducting tapes Original Research Article
183
Influence of longitudinal position on the evolution of steady-state signal in cardiac cine balanced steady-state free precession imaging
184
Influence of longitudinal wind on natural ventilation with vertical shaft in a road tunnel fire
185
Influence of long-term aqueous exposure on surface properties of plasma sprayed oxides Al2O3, TiO2 and their mixture Al2O3–13TiO2
186
Influence of long-term caloric restriction on myocardial and cardiomyocyte contractile function and autophagy in mice
187
Influence of long-term conservation tillage on soil and rhizosphere microorganisms
188
Influence of long-term corrosion in chloride environment on mechanical behaviour of RC beam
189
Influence of long-term ethanol treatment on rat liver aniline and p-nitrophenol hydroxylation
190
Influence of long-term heavy-metal contamination on microbial communities in soil
191
Influence of long-term heavy-metal contamination on microbial communities in soil
192
Influence of long-term hyperimmunization on the presence of mast cells in the endometrium of the mare
193
Influence of Long-Term Loads on Concrete Column Strength
194
Influence of Long-Term Operation on the Toughness of 17GS Pipeline Steel
195
Influence of long-term thermal exposure on the tensile properties of a high-temperature titanium alloy Ti-55
196
Influence of long-term thermal exposure on the tensile properties of a high-temperature titanium alloy Ti-55
197
Influence of loose PMMA bone cement particles on the corrosion assisted wear of the orthopedic AISI 316LVM stainless steel during reciprocating sliding
198
Influence of loosely bound extracellular polymeric substances (EPS) on the flocculation, sedimentation and dewaterability of activated sludge
199
Influence of Lorentz violation on the hydrogen spectrum Original Research Article
200
Influence of losartan and atenolol on cognitive function in very elderly hypertensive patients
201
Influence of losartan vs amlodipin on pulse wave velocity in patients with mild to moderate arterial hypertension
202
Influence of Loss Model on Design Discharge of Homogeneous Plane
203
Influence of lot size and shape on redevelopment projects
204
Influence of loudspeaker directivity and measurement geometry on direct acoustic levels over façades for acoustic insulation tests with the International Standard ISO 140-5
205
Influence of low air pressure on combustion characteristics and flame pulsation frequency of pool fires
206
Influence of low and decreasing food levels on Daphnia-algal interactions: Numerical experiments with a new dynamic energy budget model
207
Influence of low and decreasing food levels on Daphnia-algal interactions: Numerical experiments with a new dynamic energy budget model
208
Influence of low and high levels of grain defects on maize wet milling Original Research Article
209
Influence of low and high molecular weight compounds on the permeate flux decline in nanofiltration of red grape must Original Research Article
210
Influence of low concentration MgCo2(VO4)2 addition on microwave dielectric properties of Ba0.6Sr0.4TiO3 ceramics
211
Influence of low concentration of SO2 for selective reduction of NO by C3H8 in lean-exhaust conditions on the activity of Ag/Al2O3 catalyst
212
Influence of low dietary calcium during pregnancy and lactation on zinc levels in maternal blood and bone in rats
213
Influence of low dose aspirin and simvastatin on blood pressure, flow-dependent vasodilatation, tonus and elasticity of brachial artery in hypertensive nonhyperlipidemic subjects
214
Influence of low doses of radiation due to 222Rn on proliferation of fibroblasts and MCF-7 human breast cancer cells in vitro
215
Influence of low energy Ar-ion bombardment on monolayer Ni/W(1 0 0)
216
Influence of low friction coatings on the scuffing load capacity and efficiency of gears
217
Influence of low high-density lipoprotein cholesterol on left ventricular hypertrophy and diastolic function in essential hypertension
218
Influence of Low Load Truncation Level on Crack Growth for Al 2324-T39 and Al 7050-T7451
219
INFLUENCE OF LOW MACH NUMBER SHEAR FLOW ON ACOUSTIC PROPAGATION IN DUCTS
220
Influence of low methoxyl pectin gel textures and in vitro release of rutin from calcium pectinate beads
221
Influence of low oxygen tensions on expression of pluripotency genes in stem cells
222
Influence of low plasma progesterone concentrations on the release of prostaglandin F2α during luteolysis and oestrus in heifers
223
Influence of Low Power He-Ne Laser Irradiation on Hemoglobin Concentration, Mean Cellular Volume of Red Blood Cell, and Mean Cellular Hemoglobin
224
Influence of low pressure on electrets behaviour at various air gaps
225
Influence of low sucrose concentrations on the compression resistance of gellan gum gels
226
Influence of low temperature blanching on the content of valuable substances and sensory properties in ready-to-use salads Original Research Article
227
Influence of low temperature nitridization on the microstructure, morphology and optical properties of tin oxide nanocrystallines
228
Influence of low temperature oxidation and nitrogen passivation on the MOS interface of C-face 4H-SiC
229
Influence of low temperature prestrain on hydrogen gas embrittlement of metastable austenitic stainless steels
230
Influence of low temperature thermal annealing on the dark resistivity of chemical bath deposited CdS films
231
Influence of low temperature thermal pre-treatment on sludge solubilisation, heavy metal release and anaerobic digestion
232
Influence of low temperatures on the phenomenon of delamination of mode I fracture in carbon-fibre/epoxy composites under fatigue loading
233
Influence of low ultrasound intensity on the degradation of dextran catalyzed by dextranase
234
Influence of low ultrasound intensity on the degradation of dextran catalyzed by dextranase
235
Influence of low-density polyethylene addition on coking pressure
236
Influence of low-density polyethylene on the thermal characteristics and crystallinity of high melting point macro- and micro-crystalline waxes
237
Influence of low-dose and low-dose-rate ionizing radiation on mutation induction in human cells Original Research Article
238
Influence of low-dose aprotinin on the inflammatory reaction due to cardiopulmonary bypass in children
239
Influence of low-dose polyunsaturated fatty acids supplementation on the inflammatory response of healthy adults
240
Influence of lower current densities on the residual stress and structure of thick nickel electrodeposits
241
Influence of low-frequency vibrations on bubble and drop sizes formed at a single orifice
242
Influence of low-frequency wind speed fluctuations on the aeroelastic stability of suspension bridges
243
INFLUENCE OF LOW-INTENSITY SHOT PEENING ON THE FATIGUE STRENGTH OF AN Al/Al
244
Influence of low-lethal concentrations of thiamethoxam on biological characteristics of Neoseiulus californicus (Acari: Phytoseiidae)
245
Influence of low-level cadmium and reduced calcium intake on tissue Cd concentrations and behaviour of American black ducks Original Research Article
246
Influence of low-level laser irradiation on osteocalcin protein and gene expression in bone tissue
247
Influence of Low-Level Laser Modification and Adhesive Application Mode on the Bonding Efficiency of Universal Adhesives to Er:YAG Laser-Ablated Dentin
248
Influence of low-molecular-weight salts on the formation of polyelectrolyte complexes based on polycations with quaternary ammonium salt groups in the main chain and poly(sodium acrylate)
249
Influence of low-plasticity ball burnishing on the high-cycle fatigue strength of medium carbon AISI 1045 steel
250
Influence of low-pressure plasma treatment on adhesive bonding between polybutylene terephthalat (PBT) and aluminum
251
Influence of low-rank coal char properties on their SO2 removal capacity from flue gases. 2. Activated chars Original Research Article
252
Influence of low-rank coal char properties on their SO2 removal capacity from flue gases: I. Non-activated chars Original Research Article
253
Influence of low-sodium mixtures of salts on the post-salting stage of dry-cured ham process Original Research Article
254
Influence of low-strain deformation characteristics of high strength sheet steel on curl and springback in bend-under-tension tests
255
Influence of low-temperature air oxidation on the dissolution behaviour of high burn-up LWR spent fuel
256
Influence of low-temperature physical hardening on stiffness and tensile strength of asphalt concrete and stone mastic asphalt
257
Influence of low-temperature stress on the production of zearalenone by three Fusarium species in vitro
258
Influence of LPE growth conditions on the electroluminescence properties of InP/InGaAs(P) infrared emitting diodes
259
Influence of LPE process technological conditions on Si ELO layers morphology
260
Influence of L-type activated carbons on photocatalytic activity of TiO2 in 4-chlorophenol photodegradation
261
INFLUENCE OF LUBRICANT COMPOSITIONS WITH ADDITIVES ON THE OPERABILITY OF GRAY-IRON VS GALVANIC CHROME COATING FRICTION PAIRS
262
Influence of lubricant oil on heat transfer performance of refrigerant flow boiling inside small diameter tubes. Part I: Experimental study
263
Influence of lubricant oil on heat transfer performance of refrigerant flow boiling inside small diameter tubes. Part II: Correlations
264
Influence of lubricants on plain bearing performance: Evaluation of bearing performance with polymer-containing oils
265
Influence of lumbricid earthworms on yield and quality of wheat and clover in glasshouse trials
266
Influence of Lumbricus terrestris inoculation on green manure disappearance and the decomposer community in a walnut orchard
267
Influence of Lumbricus terrestris inoculation on green manure disappearance and the decomposer community in a walnut orchard
268
Influence of luminance distribution on the appetizingly fresh appearance of cabbage
269
Influence of lunar cycle, moon driven tides and water physicochemical factors on the gonadal maturation of green mussel, Perna viridis, in the inner Malampaya sound, Taytay, Palawan, Philippines
270
Influence of lung oxidant and antioxidant status on alveolarization: Role of light-exposed total parenteral nutrition
271
Influence of lustrous carbon defects on the fatigue life of ductile iron castings using lost foam process
272
Influence of lysophosphatidylcholine on the gelation of diluted wheat starch suspensions
273
Influence of lysozyme on the precipitation of calcium carbonate: a kinetic and morphologic study
274
Influence of lysozyme, yeast, azoxystrobin, and myclobutanil on fungal diseases of cucumbers grown hydroponically
275
Influence of M. tibialis anterior fatigue on the walk-to-run and run-to-walk transition in non-steady state locomotion
276
Influence of maceral content on δ13C and δ15N in a Middle Pennsylvanian coal
277
Influence of Machine Exploitation Effectiveness on Furniture Production Quality Level
278
Influence of machine tool setting parameters on EHD lubrication in hypoid gears
279
Influence of machining parameters on surface roughness and dry friction
280
Influence of Machining Parameters on the Structural Changes of Bio-Titanium Dental Implants
281
Influence of machining-induced martensite on hydrogen-assisted fracture of AISI type 304 austenitic stainless steel
282
Influence of macro- and micronutrient fertilization on fungal contamination and fumonisin production in corn grains
283
Influence of macro segregation on hydrogen environment embrittlement of SUS 316L stainless steel
284
Influence of macrofauna long-term natural variability on benthic indices used in ecological quality assessment
285
Influence of macrohabitat preferences on the distribution of European brook and river lampreys: Implications for conservation and management
286
Influence of macromolecular additives on transport properties of lithium organic electrolytes
287
Influence of macromolecule adsorption during filtration of a membrane bioreactor mixed liquor suspension
288
Influence of macroporous gold support and its functionalization on lactate oxidase-based biosensors response
289
Influence of macroporous protein scaffolds on bone tissue engineering from bone marrow stem cells
290
Influence of macroscopic residual stresses on the mechanical behavior and microstructure of porcelain tile
291
Influence of macrostructure of society on the life situation of families with a child with intellectual disability: Sweden as an example
292
Influence of maghemite concentration on magnetic interactions in maghemite/PTT-block-PTMO nanocomposite
293
Influence of magma ascent rate on carbon dioxide degassing at oceanic ridges: Message in a bubble
294
Influence of magma dynamics on melt structure: spectroscopic studies on volcanic glasses from the Cretaio Tephra of Ischia (Italy)
295
Influence of magmatism on mantle cooling, surface heat flow and Urey ratio
296
Influence of magnesia on sintering stress of alumina
297
Influence of magnesia on the structure and properties of bioactive glasses
298
Influence of magnesia on the structure and properties of MgO-Al2O3-SiO2-F− glass-ceramics
299
Influence of magnesia surface on the setting time of magnesia–phosphate cement
300
Influence of magnesium and chromium oxides on the physicochemical properties of γ-alumina Original Research Article
301
Influence of magnesium deficiency on the bioavailability and tissue distribution of iron in the rat
302
Influence of magnesium doping on the phase transformation temperature of β-TCP ceramics examined by Rietveld refinement
303
Influence of magnesium hydroxide content and fineness on the carbonation of calcium hydroxide
304
Influence of magnesium ions on heat shock and ethanol stress responses of Saccharomyces cerevisiae
305
Influence of magnesium nitrate on the corrosion performance of sol–gel coated AA2024-T3 aluminium alloy
306
Influence of magnesium on electrochemical properties of RE3–xMgx(Ni0.7Co0.2Mn0.1)9 (x=0.5–1.25) alloy electrodes
307
Influence of magnesium on grain refinement and ductility in a dilute Al–Sc alloy Original Research Article
308
Influence of magnesium on hydrogenated ScAl1−xMgx alloys: A theoretical study
309
Influence of magnesium perchlorate on the pyrolysis of organic compounds in Mars analogue soils
310
Influence of magnetic (Fe+3) and non-magnetic (Ga+3) ion doping at Mn-site on the transport and magnetic properties of La0.7Ca0.3MnO3
311
Influence of magnetic annealing on high-frequency magnetic properties of FeCoNd films
312
Influence of Magnetic Annealing on Properties of SmFe Thin Films
313
Influence of magnetic arc oscillation and current pulsing on fatigue behavior of alloy 718 TIG weldments
314
Influence of magnetic arc oscillation and current pulsing on microstructure and high temperature tensile strength of alloy 718 TIG weldments
315
Influence of magnetic clusters on electrical and magnetic properties of In1−xMnxSb/GaAs dilute magnetic semiconductor grown by liquid phase epitaxy
316
Influence of Magnetic Field and Slip on Jeffrey Fluid in a Ciliated Symmetric Channel with Metachronal Wave Pattern
317
Influence of Magnetic Field and Slip on Jeffrey Fluid in a Ciliated Symmetric Channel with Metachronal Wave Pattern
318
Influence of magnetic field configurations on divertor plasma parameters in the W7-AS stellarator
319
Influence of magnetic field deformation by ferromagnetic wall materials on MHD flows in pipes and ducts of fusion blankets
320
Influence of magnetic field errors on the spectrum of the PETRA undulator
321
Influence of magnetic field on aqueous two-phase extraction of horse ferritin in the polyethylene glycol/hydroxyethyl starch system Original Research Article
322
Influence of magnetic field on calcium carbonate precipitation Original Research Article
323
Influence of magnetic field on delayed fluorescence of coumarin dye in Langmuir–Blodgett films
324
Influence of magnetic field on electronic conduction of (Bi,Pb)–Sr–Ca–Cu–O granular superconductors
325
Influence of Magnetic Field on Fingering Instability in a Porous Medium with Cross-Diffusion Effect: a Thermal Non-equilibrium Approach
326
Influence of Magnetic Field on Fingering Instability in a Porous Medium with Cross-Diffusion Effect: a Thermal Non-equilibrium Approach
327
Influence of Magnetic Field on Fingering Instability in a Porous Medium with Cross-Diffusion Effect: a Thermal Non-equilibrium Approach
328
Influence of magnetic field on physical–chemical properties of the liquid water: Insights from experimental and theoretical models
329
Influence of magnetic field on structural defects in Si and GaAs
330
Influence of magnetic field on the adsorption of organic compound by clays modified with iron
331
Influence of magnetic field on the electronic specific heat of the organic metal (BEDT-TTF)2KHg(SCN)4
332
Influence of magnetic field on the fluidization characteristics of circulating fluidized bed
333
Influence of magnetic field on the molecular orientation in epitropic mesophase of nitrobenzene
334
Influence of magnetic field on the seeded precipitation of gibbsite from sodium aluminate solution
335
Influence of magnetic field on wear in high frequency reciprocating sliding contacts
336
Influence of magnetic field parallel to the arc on the formation of carbon nano-materials by arc discharge in water
337
Influence of magnetic field upon the electric capacity of a flat capacitor having magnetorheological elastomer as a dielectric
338
Influence of magnetic fields on negative corona discharge currents
339
Influence of magnetic forces on electrochemical mass transport
340
Influence of Magnetic Helicity in MHD
341
Influence of magnetic hysteresis on quench-voltage detection in large superconducting magnets
342
Influence of magnetic impurities on superconducting property of polycrystalline iron-based NdFeAsO0.88F0.12 Original Research Article
343
Influence of magnetic order on phonon spectra of multiferroic orthorhombic YMnO3
344
Influence of Magnetic Ordering on the Luminescence in a Layered Organic-Inorganic OPV-Ni(II) Compound
345
Influence of magnetic ordering on the resistivity anisotropy of α-MnS single crystal
346
Influence of magnetic probe presence on current sheath dynamics in plasma focus operation
347
Influence of magnetic properties of shields on recording head instability parameters
348
Influence of magnetic properties on electrochemical activity of LiNi0.5Fe0.5O2
349
Influence of magnetic properties on magnetization dynamics of high-(rho) films
350
Influence of Magnetic Saturation on Sensorless Control for Interior Permanent-Magnet Synchronous Motors With Concentrated Windings
351
Influence of magnetic water treatment on fabricsʹ characteristics
352
Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm
353
Influence of magnetism on the peak rotation of core-level photoelectrons
354
Influence of magnetite and boron carbide on radiation attenuation of cement–fiber/composite
355
Influence of magnetization rotation on martensite reorientation in magnetic shape memory alloy
356
Influence of magnetocrystalline anisotropy on the magnetization reversal mechanism in exchange bias Co/CoO bilayers
357
Influence of magnetostriction on high-frequency magnetotransport properties of current-annealed amorphous magnetic wires
358
Influence of MA-g-PP on abrasive wear behaviour of chopped sisal fibre reinforced polypropylene composites
359
Influence of Maillard conjugation on structural characteristics and rheological properties of whey protein/dextran systems
360
Influence of Maillard Reaction on Protein Modification and Colour Development in Pasta. Comparison of Different Drying Conditions
361
Influence of main channel structure on H2O2 access to the heme cavity of catalase KatE of Escherichia coli
362
Influence of maize starch granule-associated protein on the rheological properties of starch pastes. Part I. Large deformation measurements of paste properties
363
Influence of maize starch granule-associated protein on the rheological properties of starch pastes. Part II. Dynamic measurements of viscoelastic properties of starch pastes
364
Influence of major African dust intrusions on the 137Cs and 40K activities in the lower atmosphere at the Island of Tenerife
365
Influence of major inherited faults zones on gravitational slope deformation: A two-dimensional physical modelling of the La Clapière area (Southern French Alps)
366
Influence of major parameters in emulsification mechanisms using a high-pressure jet Original Research Article
367
Influence of major polyphenols on antioxidant activity in Mencيa and Brancellao red wines
368
Influence of malaxation conditions on characteristic qualities of olive oil
369
Influence of malaxation temperature and time on the quality of virgin olive oils
370
Influence of maleic anhydride grafting on the rheological properties of polyethylene terephthalate–styrene butadiene blends
371
Influence of maleic anhydride-grafted EPDM and flame retardant on interfacial interaction of glass fiber reinforced PA-66
372
Influence of Maleic-Anhydride-Polypropylene (MAPP) on the Physical Properties of Polypropylene/Sawdust fir flour Composite
373
Influence of Maleic-Anhydride-Polypropylene (MAPP) on Wettability of Polypropylene/Wood Flour/Glass Fiber Hybrid Composites
374
Influence of malocclusion on the depth of curve of Spee
375
Influence of malolactic fermentation, postfermentative treatments and ageing with lees on nitrogen compounds of red wines
376
Influence of malonic acid and triethyl-benzylammonium chloride on Zn electrowinning in zinc electrolyte
377
Influence of malt browning degree on lipoxygenase activity
378
Influence of Malt on Rheological and Baking Properties of Wheat-cassava Composite Flours
379
Influence of malt, wheat, and barley extracts on the bile tolerance of selected strains of lactobacilli Original Research Article
380
Influence of malting on selected components of soya bean, black bean, chickpea and barley
381
Influence of mammary artery as a bypass vessel on the results of seven biochemical assays after coronary artery bypass surgery
382
Influence of mammography on the management of a palpable breast lesion
383
Influence of management actions on fatigue reliability of a welded joint
384
Influence of management and precipitation on carbon fluxes in great plains grasslands
385
Influence of management practices on soil organic matter changes in the Northern China plain and Northeastern China
386
Influence of management practices on soil organic matter changes in the Northern China plain and Northeastern China
387
Influence of management regimes of adjacent land uses on the woody plant richness of hedgerows in Spanish cultural landscapes Original Research Article
388
Influence of Management System on Growth and Carcass Characteristics of Ugandan Local Chickens
389
Influence of management type on Diptera communities of coniferous plantations and deciduous woodlands
390
Influence of Managerial Skills on Completion of PPP Projects: A Case of Sondu-Miriu Power Project in Kenya
391
Influence of manganese ions on spectroscopic and dielectric properties of LiF-SrO-B2O3 glasses
392
Influence of manganese on magnetic and electronic properties of ZnCr2Se4
393
Influence of manganese on PTCR effect in BaTiO3-based ceramics doped with Bi2O3 vapor
394
Influence of manganese on stability and particle growth of hydroxyapatite in simulated body fluid
395
Influence of manganese on the structure and magnetic properties of YFeO3 nanocrystal
396
Influence of manganese promoter on co-precipitated Fe–Cu based catalysts for higher alcohols synthesis
397
Influence of manganese substitution into the A-site of perovskite type Ca1−xMnxTiO3 ceramic
398
Influence of manganese, iron and pyrolusite blending on the physiochemical properties and desulfurization activities of activated carbons from walnut shell
399
Influence of manganese, iron and pyrolusite blending on the physiochemical properties and desulfurization activities of activated carbons from walnut shell
400
Influence of mangrove reforestation on heavy metal accumulation and speciation in intertidal sediments
401
Influence of mangrove zonation on CO2 fluxes at the sediment–air interface (New Caledonia)
402
Influence of Mansonella perstans microfilaraemia on total IgE levels in Gabonese patients co-infected with Loa loa
403
Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concrete
404
Influence of manufacturing conditions on the conjugated linoleic acid content and the isomer composition in ripened French Emmental cheese
405
Influence of manufacturing process on the in-reactor creep anisotropy of stress-relieved Zircaloy-2 cladding Original Research Article
406
Influence of manufacturing processes and their sequence of execution on fatigue life of axle house tubes in automobiles
407
Influence of manufacturing tolerance on aircraft direct operating cost (DOC)
408
Influence of manufacturing variables on surface properties and dynamic adsorption properties of silica gels
409
Influence Of Manure Application And Nitrogen Fixing Bacteria On Yield And Yield Components Of Black Cumin (Nigella Sativa L.)
410
Influence of manure types and pyrolysis conditions on the oxidation behavior of manure char
411
Influence of Marcus convergence zone on western North Pacific summer monsoon
412
Influence of mare age, pre-breeding mare status, breeding method, and stallion on first cycle pregnancy rates on a large commercial breeding farm
413
Influence of mare age, pre-breeding mare status, breeding method, and stallion on first cycle pregnancy rates on a large commercial breeding farm
414
Influence of margin design on the fit of high-precious alloy restorations in patients
415
Influence of marginal configuration and porcelain addition on the fit of In-Ceram crowns
416
Influence of marginal highs on the accumulation of organic carbon along the continental slope off western India
417
Influence of marinades on survival during storage of acid-adapted and nonadapted Listeria monocytogenes inoculated post-drying on beef jerky
418
Influence of marine hydrocolloids on extruded and native wheat flour pastes and gels
419
Influence of marine micro-climates on carbonation of reinforced concrete buildings
420
Influence of marine phytoplankton, transition metals and sunlight on the species distribution of chromium in surface seawater
421
Influence of marine, terrestrial and anthropogenic sources on ionic and metallic composition of rainwater at a suburban site (northwest coast of Spain)
422
Influence of marital status, parenthood and housework on women’s attitude towards paid employment in Calabar, Nigeria
423
Influence of market forces on nutraceutical research: role of the academic researcher
424
Influence of market orientation and strategy on travel industry performance: an empirical study of e-commerce in Taiwan
425
Influence of Marshalling Length on Aerodynamic Characteristics of Urban Emus under Crosswind
426
Influence of martensite stabilization on the low-temperature non-linear anelasticity in Cu-Zn-Al shape memory alloys Original Research Article
427
Influence of martensite volume fraction and cooling rate on the properties of thermomechanically processed dual phase steel
428
Influence of martensite volume fraction and tempering time on tensile properties of partially austenitized in the (α+γ) temperature range and quenched + tempered ferritic ductile iron
429
Influence of Martensite Volume Fraction on Fatigue Limit of a Dual-Phase Steel
430
Influence of martensite volume fraction on tensile properties of triple phase ferrite–bainite–martensite steels
431
Influence of martensitic transformation on mechanical compatibility of biomedical β type titanium alloy TLM
432
Influence of martensitic transformation on the low-cycle fatigue behaviour of 316LN stainless steel at 77 K
433
Influence of martensitic transformation on the low-cycle fatigue behaviour of 316LN stainless steel at 77 K
434
Influence of mask design on the growth of InGaAs/InAlAs quantum wells on patterned substrates
435
Influence of masonry panels with openings on the seismic response of reinforced concrete infilled frames
436
Influence of mass and damping ratios on VIVs of a cylinder with a downstream counterpart in cruciform arrangement
437
Influence of mass difference on dynamic properties of isotope mixtures
438
Influence of mass flow rate on Turbulent Kinetic Energy (TKE) distribution in Cable-in-Conduit Conductors (CICCs) used for fusion grade magnets
439
Influence of mass of cone spring on oscillatory period
440
Influence of mass recovery on the performance of a heat pipe type ammonia sorption refrigeration system using CaCl2/activated carbon as compound adsorbent
441
Influence of mass transfer characteristics for DNAPL source depletion and contaminant flux in a highly characterized glaciofluvial aquifer
442
Influence of mass transfer on thermogravimetric analysis of combustion and gasification reactivity of coke
443
Influence of mass transfer resistance on detection of nonaqueous phase liquids with partitioning tracer tests
444
Influence of mass transfer resistance on overall nitrate removal rate in upflow sludge bed reactors
445
Influence of massive heat-pump introduction on the electricity-generation mix and the GHG effect: Comparison between Belgium, France, Germany and The Netherlands
446
Influence of massive projectile size and energy on secondary ion yields from organic surfaces
447
Influence of mass-transfer effect on isoconversional calculations
448
Influence of mastery and sexual frequency on depression in Korean men after a stroke
449
Influence of mastication and saliva on aroma release in a model mouth system
450
Influence of mastication on the concentrations of aroma volatiles — some aspects of flavour release and flavour perception
451
Influence of material and interface properties on the transformation behaviour of particle reinforced TRIP-matrix composites
452
Influence of material and internal support on natural frequencies of thin-walled cylindrical tanks
453
Influence of material and process parameters on bursting during hydroforming process
454
Influence of material and process parameters on the development of necking and bursting in flange and tube hydroforming
455
Influence of material characteristics on plastomechanics of the FSW process for T-joints
456
Influence of material models on the stress state in thermal barrier coating simulations
457
Influence of material properties and stamping conditions on the stiffness and static dent resistance of automotive panels
458
Influence of material properties on sliding contact braking applications
459
Influence of material properties on temperature and thermal stress of thermal barrier coating near a normal cooling hole
460
Influence of material properties on the agglomeration of water-soluble amorphous particles
461
Influence of material properties on the interaction between residual stress and springback in the case of in plane sheets forming
462
Influence of material properties on the laser-forming process of sheet metals
463
Influence of material properties on the wear of composite coatings
464
Influence of material properties upon immobilization of histidine-tagged protein on Ni–Co coated chip
465
Influence of material selection on energy demand in residential houses
466
Influence of material selection on the risk of inlay fracture during pre-cementation functional occlusal tapping
467
Influence of material structure on air-borne ultrasonic application in drying
468
Influence of material structure on air-borne ultrasonic application in drying
469
Influence of material structure on the electrochemical behavior of nickel–titanium carbonitride composites
470
Influence of material transition and interfacial area changes on flow and concentration in electro-osmotic flows Original Research Article
471
Influence of material’s ductility and local deformation mode on multiaxial fatigue response
472
Influence of maternal and fetal glucokinase mutations in gestational diabetes
473
Influence of Maternal and Postweaning Linseed Dietary Supplementation on Growth Rate, Lipid Profile, and Meat Quality Traits of Light Sarda Lambs
474
Influence of Maternal Anemia During Pregnancy on Placenta and Newborns
475
Influence of maternal dietary calcium levels on milk zinc, calcium and phosphorus contents and milk production in rats
476
Influence of Maternal Ethanol Exposure on Systemic Hemodynamic Variables and Histopathological Changes in the Aorta Wall of Male Rat Offspring: A Three-month Follow-up
477
Influence of maternal feed rationing on metabolic and contractile properties of Longissimus lumborum muscle fibres in the rabbit offspring
478
Influence of Maternal Glucose Level on Ethnic Differences in Birth Weight and Pregnancy Outcome
479
Influence of maternal hypercholesterolaemia during pregnancy on progression of early atherosclerotic lesions in childhood: Fate of Early Lesions in Children (FELIC) study Original Research Article
480
Influence of maternal oral healthcare behavior during childhood on children’s oral health care during adolescence
481
Influence of maternal undernutrition and overfeeding on cardiac ciliary neurotrophic factor receptor and ventricular size in fetal sheep
482
Influence of mathematical models in design of PV-Diesel systems
483
Influence of mating preferences on yolk testosterone in the grey partridge
484
Influence of Mating Type and Oviposition Period on Mandibular Pheromone Levels in Apis mellifera L. Honeybee Queens
485
Influence of Matric Potential on Survival and Activity of Genetically Engineered Ralstonia eutropha H850Lr.
486
Influence of Matric Potential on Survival and Activity of Genetically Engineered Ralstonia eutropha H850Lr.
487
Influence of matrices on oxygen sensing of three sensing films with chemically conjugated platinum porphyrin probes and preliminary application for monitoring of oxygen consumption of Escherichia coli (E. coli)
488
Influence of matrix activation and polymer coating on the purification of human IgG with protein A affinity membranes
489
Influence of matrix carbon texture on the temperature field of carbon/carbon composites during braking
490
Influence of matrix characteristics on tensile properties of in situ synthesized TiC/TA15 composite
491
Influence of matrix composition on polymerization stress development of experimental composites
492
Influence of matrix composition on the ternary solubility of cholesteryl esters in supercritical carbon dioxide
493
Influence of matrix conductivity and Coulomb blockade effect on the percolation threshold of insulator–conductor composites
494
Influence of matrix ductility on the high-temperature fatigue behavior of off-axis woven-ply thermoplastic and thermoset laminates
495
Influence of matrix habitats on the occurrence of insectivorous bird species in Amazonian forest fragments Original Research Article
496
Influence of matrix on conductivity properties of crystalline network of α-(BEDT-TTF)2I3 in polymer composites
497
Influence of matrix on external mass transfer resistance in immobilized urease membranes
498
Influence of matrix on third order optical nonlinearity for semiconductor nanocrystals embedded in glass thin films prepared by Rf-sputtering
499
Influence of matrix rigidity on the internal twisting of electronically excited thioflavin T in polymer nanostructures
500
Influence of matrix structure on the fatigue properties of an alloyed ductile iron
501
Influence of matrix systems on proximal contact tightness of 2- and 3-surface posterior composite restorations in vivo
502
Influence of matrix systems on proximal contact tightness of 2- and 3-surface posterior composite restorations in vivo
503
Influence of matrix toughness and ductility on the compression-after-impact behavior of woven-ply thermoplastic- and thermosetting-composites: A comparative study
504
Influence of maturation and cooking treatments on the nutritional value of bovine meats: Water losses and vitamin B12
505
Influence of mature adipocytes on osteoblast proliferation in human primary cocultures
506
Influence of maturity and postharvest treatment on the volatile profile and physiological properties of the durian (Durio zibethinus Murray) fruit
507
Influence of maturity on carbazole and benzocarbazole distributions in crude oils and source rocks from the Sonda de Campeche, Gulf of Mexico
508
Influence of maturity on distributions of benzo- and dibenzothiophenes in Tithonian source rocks and crude oils, Sonda de Campeche, Mexico
509
Influence of MCM-41 particle on mechanical and morphological behavior of polypropylene
510
Influence of m-cresol purple indicator additions on the pH of seawater samples: correction factors evaluated from a chemical speciation model
511
Influence of MEA and piperazine additives on the desulfurization ability of MDEA aqueous for natural gas purification
512
Influence of meal time on salivary circadian cortisol rhythms and weight loss in obese women
513
Influence of mean flow profile and geometrical ratios on scattering of sound at a sudden area expansion in a duct
514
Influence of mean stress and variable amplitude loading on the fatigue behaviour of a high-strength steel in VHCF regime
515
Influence of mean stress on the multiaxial fatigue behaviour of defective materials
516
Influence of mean stresses on fatigue life and damage of a turbine blade steel in the VHCF-regime
517
Influence of measured objects parameters on CMM touch trigger probe accuracy of probing
518
Influence of measurement accuracy on the application of the 1991 NIOSH equation
519
Influence of measurement cell size on predicted attrition by the Distinct Element Method
520
Influence of measurement conditions and system parameters on accuracy of remote temperature measurement with dualspectral IR systems
521
Influence of measurement errors and estimated parameters on combustion diagnosis
522
Influence of measurement errors on stress estimated from single-phase fault/slip data
523
Influence of measurement frequency on the evaluation of short-term dose of sub-micrometric particles during indoor and outdoor generation events
524
Influence of measurement noise and laser arrangement on measurement uncertainty of laser tracker multilateration in machine tool volumetric verification
525
Influence of measurement set-up of ground-based LiDAR for derivation of tree structure
526
Influence of measurement uncertainties on the determination of the Weibull distribution
527
Influence of measuring conditions on the thixotropy of hydrotalcite-like/montmorillonite suspension
528
INFLUENCE OF MEAT COMPONENTS ON ANTIOXIDANT ACTIVITY OF BEEF SARCOPLASMIC PROTEINS/MALONDIALDEHYDE REACTION PRODUCTS IN MODEL EMULSIONS
529
Influence of meat exudates on the quality characteristics of fresh and freeze-thawed pork
530
Influence of meat quality and NaCl percentage on glutathione peroxidase activity and values for acid-reactive substances of raw and dry-cured Longissimus dorsi
531
Influence of mechanical activation and fluorine ion on forsterite formation
532
Influence of mechanical activation and thermal treatment time on nanoparticle forsterite formation mechanism
533
Influence of mechanical activation on combustion synthesis of fine silicon carbide (SiC) powder
534
Influence of mechanical activation on selectivity of acid leaching of arsenopyrite
535
Influence of mechanical activation on sphene based ceramic material synthesis
536
Influence of mechanical activation on the alkaline leaching of enargite concentrate
537
Influence of mechanical activation on the alkaline leaching of enargite concentrate
538
Influence of mechanical activation on the synthesis and hydraulic activity of calcium dialuminate
539
Influence of mechanical agitation on cutinases and protease activity towards polyamide substrates
540
INFLUENCE OF MECHANICAL ALLOYING and LEAD CONTENT ON MICROSTRUCI'URE, HARDNESS and 'IRIBOLOGICAL BEHAVIOR OF 6061ALUMINIUMALLOYS
541
Influence of mechanical alloying on Ti3SiC2 formation via spark plasma sintering technique from Ti/SiC/C powders
542
Influence of mechanical and chemical activation on the hydraulic properties of gamma dicalcium silicate
543
Influence of mechanical and chemical polishing in the solubility of acrylic resins polymerized by microwave irradiation and conventional water bath
544
Influence of mechanical and chemical surface treatments on the formation of bone-like structure in cpTi for endosseous dental implants
545
Influence of Mechanical Cell Salvage on Red Blood Cell Aggregation, Deformability, and 2,3-Diphosphoglycerate in Patients Undergoing Cardiac Surgery With Cardiopulmonary Bypass
546
Influence of mechanical cycling on damping behaviour of short fibre-reinforced magnesium alloy QE22
547
Influence of mechanical distortion on the solubility of fluorapatite
548
Influence of mechanical factors on movement units in infant reaching
549
Influence of mechanical harvest on the physical properties of processing tomato (Lycopersicon esculentum Mill.) Original Research Article
550
Influence of mechanical loading on static and dynamic CO2 efflux on differently textured and managed Luvisols
551
Influence of mechanical milling time on physicochemical properties and stability of cefotaxime sodium
552
Influence of mechanical mixing intensity on a biofilm structure and permeability in a membrane bioreactor Original Research Article
553
Influence of mechanical parameters and overburden pressure on the mechanical evolution of fault propagation folds: insights from 2D finite-element elastic-plastic models applied to the Ayegan anticline, central Alborz
554
Influence of mechanical properties of the sheet material on formability in single point incremental forming
555
Influence of mechanical properties on impact fracture: Prediction of the milling behaviour of pharmaceutical powders by nanoindentation
556
Influence of mechanical properties on the nanowear of uniaxially oriented poly(ethylene terephthalate) film
557
Influence of mechanical stratigraphy and initial stress state on the formation of two fault propagation folds
558
Influence of mechanical stratigraphy and kinematics on fault scaling relations
559
Influence of mechanical stratigraphy on folding vs faulting
560
Influence of mechanical stress on nanosecond laser-induced damage threshold of fused silica
561
Influence of mechanical stresses on partial discharge in a piezoelectric solid containing cavities
562
Influence of mechanical surface treatments on the high cycle fatigue performance of TIMETAL 54M
563
Influence of mechanical ventilation system on indoor carbon dioxide and particulate matter concentration
564
Influence of mechanical ventilation-shaft connecting location on subway tunnel ventilation performance
565
Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites
566
Influence of mechanical-biological waste pre-treatment methods on the gas formation in landfills
567
Influence of mechanically milled powder and high pressure on spark plasma sintering of Mg–Cu–Gd metallic glasses Original Research Article
568
Influence of mechanically treated carbon fibre additives on structure formation and properties of autoclaved aerated concrete
569
Influence of mechanochemical activation in various media on structure of porous and non-porous silicas
570
Influence of mechano-chemical activation on biooxidation of auriferous sulphides
571
Influence of mechanochemical activation on the sintering of cordierite ceramics in the presence of Bi2O3 as a functional additive
572
Influence of media-packing ratio on performance of anaerobic hybrid reactors
573
Influence of medical audit on electrodiagnostic evaluation of polyneuropathy. A multicentre study
574
Influence of medical conditions on executive and memory functions in low socioeconomic status African Americans
575
INFLUENCE OF MEDICAL PLANTS ON HUMAN HEALTH AND URBAN ENVIRONMENT
576
Influence of medication choice and comorbid diabetes: the cost of bipolar disorder in a privately insured US population
577
Influence of mediterranean cereal-based rotations on soil micromorphological characteristics
578
Influence of medium- and long-range interactions in different folding types of globular proteins Original Research Article
579
Influence of medium chirality on electric dipole–dipole resonance energy transfer
580
Influence of medium components and fermentation conditions on the production of bacteriocin(s) by Bacillus licheniformis AnBa9
581
Influence of medium composition and explant type on plantlet regeneration in cotton (Gossypium hirsutum L.)
582
Influence of medium composition, static and stirred conditions on the proliferation of and matrix protein expression of bovine articular chondrocytes cultured in a 3-D collagen scaffold
583
Influence of medium correction of nucleon–nucleon cross-section on the fragmentation and nucleon emission Original Research Article
584
Influence of medium-chain triglyceride-based lipid emulsion on rat polymorphonuclear cell functions
585
Influence of medium-chain triglycerides on expansion and rheological properties of extruded corn starch
586
Influence of melatonin on proliferation and antioxidant system in Ehrlich ascites carcinoma cells
587
Influence of melatonin receptor 1A gene polymorphisms on seasonal reproduction in Sarda ewes with different body condition scores and ages
588
Influence of melt convection on dendritic spacings of downward unsteady-state directionally solidified Al–Cu alloys
589
Influence of melt convection on dendritic spacings of downward unsteady-state directionally solidified Al–Cu alloys
590
Influence of melt convection on dendritic spacings of downward unsteady-state directionally solidified Al–Cu alloys
591
Influence of melt flow and temperature on erosion of refractory and deposit formation in aluminium melting furnaces
592
Influence of melt induced mechanical anisotropy on the magnetic fabrics and rheology of deforming migmatites, Central Vosges, France
593
Influence of melt on the creep behavior of olivine–basalt aggregates under hydrous conditions
594
Influence of melt treatments and turning inserts on cutting force and surface integrity in turning of Al–12Si and Al–12Si–3Cu cast alloys
595
Influence of melt treatments and turning inserts on cutting force and surface integrity in turning of Al–7Si and Al–7Si–2.5Cu cast alloys
596
Influence of Melt Treatments on Dry Sliding Wear Behavior of Hypereutectic Al-15Si-4Cu Cast Alloys
597
Influence of melt treatments on sliding wear behavior of Al–7Si and Al–7Si–2.5Cu cast alloys
598
Influence of melt undercooling on the microstructure of levitated Cr–Mo–V tool steel
599
Influence of melt viscosity of basaltic and andesitic composition on seismic attenuation in partially molten gabbronorite
600
Influence of melting conditions on the thermal behaviour of poly(l-lactic acid)
601
Influence of Member Length Imperfection on the Capacity of Spatial Structures
602
Influence of membrane and colloid characteristics on fouling of nanofiltration membranes
603
Influence of membrane composition modification on isolated heart resistance to adrenergic actions
604
Influence of membrane fatty acid composition on cell viability and lipid peroxidation in a cell model (AR42J) of cerulein-induced acute pancreatitis
605
Influence of membrane fouling by (pretreated) surface water on rejection of pharmaceutically active compounds (PhACs) by nanofiltration membranes
606
Influence of membrane fouling reducers (MFRs) on filterability of disperse mixed liquor of Jet Loop Bioreactors
607
Influence of membrane material and corrugation and process conditions on emulsion microfiltration
608
Influence of membrane morphology on characteristics of porous hydrophobic PVDF hollow fiber contactors for CO2 stripping from water Original Research Article
609
Influence of membrane morphology on humic acid removal behavior of adsorptive membrane by embedding modified montmorillonite
610
Influence of membrane morphology on pore activation in membrane emulsification
611
Influence of membrane morphology on the flux decline during dead-end ultrafiltration of refinery and petrochemical waste water
612
Influence of membrane potentials upon reversible protonation of acidic residues from the OmpF eyelet Original Research Article
613
Influence of membrane properties on fouling in submerged membrane bioreactors
614
Influence of Membrane Properties on Pineapple Wine Clarification and Fouling Behaviour
615
Influence of membrane skin morphology on CO2/N2 separation at sub-ambient temperatures
616
Influence of Membrane Stresses on Postbuckling of Rectangular Plates Using a Nonlinear Elastic 3-D Cosserat brick Element
617
Influence of membrane support layer hydrophobicity on water flux in osmotically driven membrane processes
618
Influence of membrane surface properties on initial rate of colloidal fouling of reverse osmosis and nanofiltration membranes
619
Influence of membrane surface properties on the growth of neuronal cells isolated from hippocampus
620
Influence of membrane type, current and potential on the response to chemical toxicants of a microbial fuel cell based biosensor
621
Influence of menstrual cycle and salivary B-estradiol on volatile sulfur compound
622
Influence of mental disorders on receipt of revascularization following hospitalization for myocardial infarction
623
Influence of mental stress and circadian cycle on postprandial lipemia
624
Influence of Menthol Absorption on the Mechanical Properties of PET Bottles
625
Influence of menu planning strategies on the nutrient composition of Texas school lunches
626
Influence of menu planning strategies on the nutrient composition of Texas school lunches
627
Influence of Mercerization on the Dynamic Mechanical Properties of Bamboo, a Natural Lignocellulosic Composite
628
Influence of mercury environment on the fatigue behavior of spallation neutron source (SNS) target container materials
629
Influence of mercury environment on the fatigue behavior of spallation neutron source (SNS) target container materials
630
Influence of mercury on chlorophyll content in winter wheat and mercury bioaccumulation
631
Influence of mercury velocity on compatibility with type 316L/316LN stainless steel in a flow loop
632
Influence of meridional N3-ligands on supramolecular assembling and redox behavior of carboxylatocopper(II) complexes
633
Influence of Mesenchymal Stem Cells with Endothelial Progenitor Cells in Co-culture on Osteogenesis and Angiogenesis: An In Vitro Study
634
Influence of mesh density, cortical thickness and material properties on human rib fracture prediction
635
Influence of mesh size and core penetration on estimates of deep-sea nematode abundance, biomass, and diversity
636
Influence of mesh structure on 2D full shallow water equations and SCS Curve Number simulation of rainfall/runoff events
637
Influence of Mesologic Parameters On The Phytoplankton Distribution along of Transects Localized Between Cape Cantin And Dakhla
638
Influence of mesophase activation conditions on the specific capacitance of the resulting carbons
639
Influence of mesopore volume and adsorbate size on adsorption capacities of activated carbons in aqueous solutions Original Research Article
640
Influence of mesoporous substrate morphology on the structural, optical and electrical properties of RF sputtered ZnO layer deposited over porous silicon nanostructure
641
Influence of mesoscale eddies on biological production in the Mozambique Channel: Several contrasted examples from a coupled ocean-biogeochemistry model
642
Influence of mesoscale eddies on nitrate distribution during the POMME program in the northeast Atlantic Ocean
643
Influence of mesoscale eddies on spatial structuring of top predators’ communities in the Mozambique Channel
644
Influence of mesoscale features on micronekton and large pelagic fish communities in the Mozambique Channel
645
Influence of mesoscopic ordering on the photoexcitation transfer dynamics in supramolecular assemblies of oligo-p-phenylenevinylene
646
Influence of mesostasis in volcanic rocks on the alkali-aggregate reaction
647
Influence of Mesozoic distension on the triggering of halokinesis in the Prerifan ridges (Morocco, southern Rif): contribution of seismic and well data
648
Influence of mesquite (Prosopis glandulosa) on soil nitrogen and carbon development: Implications for global carbon sequestration
649
Influence of metabolic syndrome on arterial stiffness and its age-related change in young adults: the Bogalusa Heart Study
650
Influence of Metabolism on Epigenetics and Disease
651
Influence of metakaolin and silica fume on the heat of hydration and compressive strength development of mortar
652
Influence of Metakaolin as Partially Cement Replacement Minerals on the Properties of Cement and Concrete
653
Influence of metakaolin as supplementary cementing material on strength and durability of concretes
654
Influence of metakaolin characteristics on the mechanical properties of geopolymers
655
Influence of metakaolin on pore structure-related properties and thermodynamic stability of hydrate phases of concrete in seawater environment
656
Influence of metakaolin on the properties of mortar and concrete: A review
657
Influence of metal cathode for organic photovoltaic device performance
658
Influence of metal cations on the inhibitive effect of polyaniline for iron in 0.5 M H2SO4
659
Influence of metal cleaning methods on the resin bond strength to NiCr alloy
660
Influence of metal coating on single-walled carbon nanotube: Molecular dynamics approach to determine tensile strength
661
Influence of metal complex formation on heavy metal and free EDTA and DTPA acute toxicity determined by Daphnia magna
662
Influence of metal complexation on acidity of cytosine nucleosides: Part I, LiC, NaC and KC cation
663
Influence of metal complexes on the formation of γ-cyclodextrin-bicapped C60n− (n: 1 and 2) in aqueous solution
664
Influence of metal contacts and charge inhomogeneity on transport properties of graphene near the neutrality point
665
Influence of Metal Content on Size, Dispersion, and Magnetic Properties of Iron-Cobalt Alloy Nanoparticles Embedded in Silica Matrix
666
Influence of metal exposure history on trace metal uptake and accumulation by marine invertebrates
667
Influence of metal foam on heat transfer characteristics of refrigerant-oil mixture flow boiling inside circular tubes
668
Influence of metal grid patterns on the performance of silicon solar cells at different illumination levels
669
Influence of metal grid spacing on the conversion efficiency of concentration solar cell at different illumination levels
670
Influence of metal impurity on recycled aggregate concrete and inspection method for aluminum impurity
671
Influence of metal ion concentration in the glycol mediated synthesis of Gd2O3:Eu3+ nanophosphor
672
Influence of metal ion on electrorheological properties of carboxyl-group-immobilized chitosan dispersed suspension under electric field
673
Influence of metal ion on sorption of p-nitrophenol onto sediment in the presence of cetylpyridinium chloride Original Research Article
674
Influence of metal ions and pH on the hydraulic properties of potential acid sulfate soils
675
Influence of metal ions binding on free radical concentration in humic acids. A quantitative electron paramagnetic resonance study
676
Influence of Metal Ions on Flavonoid Protection against Asbestos-Induced Cell Injury
677
Influence of metal ions on folding pathway and conformational stability of bovine serum albumin
678
Influence of metal ions on hydrogenation of o-chloronitrobenzene over platinum colloidal clusters Original Research Article
679
Influence of Metal Ions on Oscillatory Behavior of Zinc Anode in Nitric Acid-Potassium Dichromate Media
680
Influence of metal ions on phosphatidylcholine–bovine serum albumin model membrane, an FTIR study
681
Influence of metal ions on the photocatalytic activity: Selective oxidation of benzyl alcohol on iron (III) ion-modified TiO2 using visible light
682
Influence of metal ions on the structure and spectral properties of TCNQ salts with tris(phenanthroline) cations
683
Influence of metal ions on the structure and spectral properties of TCNQ salts with tris(phenanthroline) cations
684
Influence of metal ions on the structures of Keggin polyoxometalate-based solids: Hydrothermal syntheses, crystal structures and magnetic properties
685
Influence of Metal Loading on the Mode of Metal Retention in a Natural Clay
686
Influence of metal nanoparticle decorated CNTs on polyurethane based electro active shape memory nanocomposite actuators
687
Influence of metal organic and inorganic precursors on spray pyrolyzed ceramic MgO (2 0 0) thin films for epitaxial over layers
688
Influence of metal oxide on LiBH4/2LiNH2/MgH2 system for hydrogen storage properties
689
Influence of metal oxides on PCDD/Fs formation from pentachlorophenol
690
Influence of metal oxides on the catalytic activity of nickel Original Research Article
691
Influence of metal oxides on the catalytic behavior of Au/Al2O3 for the selective reduction of NOx by hydrocarbons
692
Influence of metal oxides on the performance of Pd/Al2O3 catalysts for methane combustion under lean-fuel conditions
693
Influence of metal particle size on the hydrogenation of maleic anhydride over Pd/C catalysts in scCO2
694
Influence of metal powder particleʹs shape on the kinetics of hydriding
695
Influence of metal powder shape on drag coefficient in a spray jet
696
Influence of metal precursors on the catalytic activity and structure of non-precious metal electrocatalysts for oxygen reduction reaction
697
Influence of metal resistant-plant growth-promoting bacteria on the growth of Ricinus communis in soil contaminated with heavy metals Original Research Article
698
Influence of metal salt addition on the carbonization behavior of iodinated poly(vinyl alcohol)
699
INFLUENCE OF METAL SPECIATION IN LANDFILL LEACHATES ON KAOLINITE SORPTION
700
Influence of metal surface preparation on its surface profile, contact angle, surface energy and adhesion with glass fibre prepreg
701
Influence of metal to ligand molar ratios on the supramolecular structure formation of Cu(II) with diaminopropane and iodide: Synthesis, structure, spectroscopic and DFT studies
702
Influence of metalaxyl- and mefenoxam-based fungicides on chemical and biochemical attributes of soil quality under field conditions in a southern humid forest zone of Cameroon
703
Influence of metalaxyl- and mefenoxam-based fungicides on chemical and biochemical attributes of soil quality under field conditions in a southern humid forest zone of Cameroon
704
Influence of metalaxyl fungicide seed treatment on severity of rootworm (Diabrotica spp.) damage to corn (Zea mays) under no-tillage conditions
705
Influence of metallic and oxidized iron/steel on the reactivity of triphenyl phosphorothionate in oil solution
706
Influence of metallic based fuel additives on performance and exhaust emissions of diesel engine
707
Influence of metallic fillers on the thermal and mechanical behaviour in composites of epoxy matrix
708
Influence of metallic ions in the bioleaching of chalcopyrite by Sulfolobus BC: Experiments using pneumatically stirred reactors and massive samples
709
Influence of metallic oxides on ethanol oxidation
710
Influence of metallic precursors on the properties of carbon-supported bismuth-promoted palladium catalysts for the selective oxidation of glucose to gluconic acid Original Research Article
711
Influence of metallic species on TiO2 for the photocatalytic degradation of dyes and dye intermediates
712
Influence of metallic trays on the ac resistance and ampacity of low-voltage cables under non-sinusoidal currents
713
Influence of Metallo Core Variation on 1-Methylimidazole Ligation to the Iron(III) in Porphyrin, Porphycene, Corrphycene, and Hemiporphycene
714
Influence of metallurgical variables on delayed hydride cracking in Zr–Nb pressure tubes
715
Influence of metal–oxide interfaces on L12 ordering in Cu3Pd Original Research Article
716
Influence of metals on IL-6 release in vitro
717
Influence of metal–support interaction in Pt/C on CO and methanol oxidation reactions
718
Influence of Metastability Errors on SNR in Successive-Approximation A/D Converters
719
Influence of metastable atoms in radio-frequency argon discharges
720
Influence of metastable hydrated phases on the pore size distribution and degree of hydration of MK-blended cements cured at 60 °C
721
Influence of meteorological conditions and particulate matter on visual range impairment in Jinan, China
722
Influence of meteorological conditions on PM2.5 and PM2.5−10 concentrations during the monsoon season in Hanoi, Vietnam
723
Influence of meteorological conditions on trans-Pacific transport of Asian dust during spring season
724
Influence of meteorological factors and air pollution on the outbreak of severe acute respiratory syndrome
725
Influence of meteorological factors and emission sources on spatial and temporal variations of PM10 concentrations in Istanbul metropolitan area
726
Influence of meteorological factors and polluting environment on rain chemistry and wet deposition in a rural area near Chimay, Belgium
727
Influence of Meteorological Factors on Date Bunch Fading Disorder
728
INFLUENCE OF METEOROLOGICAL FACTORS ON MAIZE PERFORMANCE IN LATVIA
729
Influence of meteorological factors on the atmospheric mercury measurement by a novel passive sampler
730
Influence of meteorological factors on the NO2 measurements by passive diffusion tube
731
INFLUENCE OF METEOROLOGICAL PARAMETERS IN HOURLY PATTERNS OF GRASS (POACEAE) POLLEN CONCENTRATIONS
732
INFLUENCE OF METEOROLOGICAL PARAMETERS ON THE YIELD AND CHEMICAL COMPOSITION OF COMMON BUCKWHEAT (Fagopyrum esculentum Moench
733
Influence of meteorological variability on primary production dynamics in the Ligurian Sea (NW Mediterranean Sea) with a 1D hydrodynamic/biological model
734
Influence of meteorological variability upon aerosol mass size distribution
735
Influence of methane concentration on the optical indices of Titan’s aerosols analogues
736
Influence of methane in the electrical properties of polypyrrole films doped with dodecylbenzene sulfonic acid
737
Influence of methane in the electrical properties of polypyrrole films doped with dodecylbenzene sulfonic acid
738
Influence of methanol and cyclodextrin cavity size on stoichiometry and binding constant of 3-[2-(9-anthryl)benzoxazol-5-yl]-alanine
739
Influence of methanol and its metabolites on the activity of α1-Antitrypsin
740
Influence of methanol conditioning and physical aging on carbon spin-lattice relaxation times of poly(1-trimethylsilyl-1-propyne)
741
INFLUENCE OF METHANOL EXTRACT IN SHOOT PROLIFERATION OF PLUM (PRUNUS DOMESTICA .) CV “SHENGJINE” BY IN VTRO PROPAGATION
742
Influence of methanol on catalytic activity, stability and internal dynamics of myoglobin
743
Influence of methanol on retention of hydrophobic organic chemicals in soil leaching column chromatography
744
Influence of methanolic extracts of soybean seeds and soybean oil on lipid oxidation in linseed oil
745
Influence of method of preparation of solid, double-metal cyanide complexes on their catalytic activity for synthesis of hyperbranched polymers Original Research Article
746
Influence of Method of Teaching Endodontics on the Self-Efficacy and Self-Perceived Competence of Undergraduate Dental Students
747
Influence of method of whole-wheat feeding on the performance, digestive tract development and carcass traits of broiler chickens
748
Influence of Method Supplementation of Yellow Grease on Growth Performance, Dietary Energetics, Carcass Characteristics and Nutrient Digestion of Feedlot Steers
749
Influence of Methods and Time of Sowing on Growth and Forage Productivity of Sorghum and Pearl Millet Plants
750
Influence of methoprene and dietary protein on male Anastrepha suspensa (Diptera:Tephritidae) mating aggregations
751
Influence of methoprene and temperature on diapause termination in adult females of the over-wintering solitary bee, Osmia rufa L.
752
Influence of methoxy- and nitro-substitutions in the aromatic ring on proton donation ability in hydrogen bond and on the amino group parameters of free and H-bonded molecules of 2-aminopyrimidine
753
Influence of methoxy substitution on the properties of 9,9-fluorenylidene-linked triphenylamine derivatives
754
Influence of methoxy substitution on the properties of 9,9-fluorenylidene-linked triphenylamine derivatives
755
Influence of methyl group position in bipyridine ligand on structure and luminescence of related zinc(II) nitrate complexes
756
Influence of methyl jasmonate on ginsenoside biosynthesis in suspension cultures of Panax quinquefolium L.
757
Influence of Methyl Jasmonate on Menthol Production and Gene Expression in Peppermint (Mentha x piperita L.)
758
Influence of Methyl Jasmonate on Menthol Production and Gene Expression in Peppermint (Mentha x piperita L.)
759
Influence of methylcellulose on dynamic rheology of dilute wheat gliadin solution in 50% (v/v) aqueous propanol Original Research Article
760
Influence of methylimidazole isomers on ferrocene-catalysed nitrogen doped carbon nanotube synthesis
761
Influence of methylmercury from tributary streams on mercury levels in Savannah River Asiatic clams
762
Influence of metoprolol on heart rate variability in survivors of remote myocardial infarction
763
Influence of Mg and Ce addition to ruthenium based catalysts used in the selective hydrogenation of α,β-unsaturated aldehydes Original Research Article
764
Influence of Mg and Cr substitution on structural and magnetic properties of polycrystalline Ni0.50Zn0.50−x−yMgxCryFe2O4
765
Influence of Mg and solution heat treatment on the occurrence of incipient melting in Al–Si–Cu–Mg cast alloys
766
Influence of Mg composition on the characteristics of MgZnO/ZnO heterostructures grown by co-sputtering
767
Influence of Mg doping level on morphology, optical, electrical properties and antibacterial activity of ZnO nanostructures
768
Influence of Mg doping on dielectric and optical properties of ZnO nano-plates prepared by wet chemical method
769
Influence of Mg doping on the performance of LiNiO2 matrix ceramic nanoparticles in high-voltage lithium-ion cells
770
Influence of Mg17Al12 intermetallic compounds on the hot extruded microstructures and mechanical properties of Mg–9Al–1Zn alloy
771
Influence of Mg17Al12 intermetallic compounds on the hot extruded microstructures and mechanical properties of Mg–9Al–1Zn alloy
772
Influence of Mg2+ concentration, pH value and specimen parameter on the hemolytic property of biodegradable magnesium
773
Influence of Mg2+ on luminescence efficiency and charge compensating mechanism in phosphor CaAl12O19:Mn4+
774
Influence of Mg2+ on the growth and activity of sulfate reducing bacteria
775
Influence of Mg2+ on the kinetics of calcite precipitation and calcite crystal morphology
776
Influence of Mg3AlNi2 content on the cycling stability of Mg2Ni–Mg3AlNi2 hydrogen storage alloy electrodes
777
Influence of Mg-containing precursor flow rate on the structural, electrical and mechanical properties of Mg-doped GaN thin films
778
INFLUENCE OF MGO ADDITION ON MICROSTRUCTURE AND PROPERTIES OF REACTION SINTERED ALUMINIUM TITANATE
779
Influence of MgO addition on the properties of new tailored FGZM/A ceramics
780
Influence of MgO and ZrO2 buffer layers on dielectric properties of Ba(Zr0.20Ti0.80)O3 thin films prepared by sol–gel processing
781
Influence of MgO on microstructure and properties of mullite–Mo composites fabricated by pulse electric current sintering
782
Influence of MgO on the formation of Ca3SiO5 and 3CaO•3Al2O3•CaSO4 minerals in alite–sulphoaluminate cement
783
Influence of MgO/CaO ratio on the properties of MgO–CaO–Al2O3–SiO2 glass–ceramics for LED packages
784
Influence of MgO-modified SBA-15 on the structure and catalytic activity of supported vanadium oxide catalysts
785
Influence of Mg-substitution on the physicochemical properties of calcium phosphate powders
786
Influence of MH electrode thickness and packing density on the electrochemical performance of air–MH batteries
787
Influence of MHC class II genotype on outcome of infection with hepatitis C virus
788
Influence of MHD and Wall Properties on the Peristaltic Transport of a Williamson Fluid with Variable Viscosity Through Porous Medium
789
Influence of MHD for Newtonian Fluid and Heat Transfer in Microchannals between Two Parallel Plates Using HAM
790
Influence of MHD on Some Oscillating Motions of a Fractional Burgers Fluid
791
Influence of MHD on Steady State Newtonian Fluid Flow in A vertical Channel With Porous Wall Using HAM
792
Influence of micaceous impurity on dynamically recrystallized quartz c-axis fabric in L-S tectonites from the Singhbhum Shear Zone and its footwall, Eastern India
793
Influence of Micro and Nano Silica on Mechanical Properties of Plasticized Sulfur Composites
794
Influence of micro structure on acoustic emission behavior during stage 2 fatigue crack growth in solution annealed, thermally aged and weld specimens of AISI type 316 stainless steel
795
Influence of micro structure on acoustic emission behavior during stage 2 fatigue crack growth in solution annealed, thermally aged and weld specimens of AISI type 316 stainless steel
796
Influence of micro/nano-textures and chemical modification on the nanotribological property of Au surface
797
Influence of microarc oxidation and hard anodizing on plain fatigue and fretting fatigue behaviour of Al–Mg–Si alloy
798
Influence of microbes on the mobilization, toxicity and biomethylation of arsenic in soil
799
Influence of microbial activity, organic carbon content, soil texture and soil depth on mineralisation rates of low concentrations of 14C-mecoprop—development of a predictive model
800
Influence of microbial activity, organic carbon content, soil texture and soil depth on mineralisation rates of low concentrations of 14C-mecoprop—development of a predictive model
801
Influence of microbial hydroxamate siderophores on Pb(II) desorption from α-FeOOH
802
INFLUENCE OF MICROBIAL TRANSGLUTAMINASE ON SOME PHYSICAL AND MICROSTRUCTURAL PROPERTIES OF COW MILK COAGULUM SUPPLEMENTED WITH WHEY PROTEINS
803
Influence of micro-blasting on the microstructure and residual stresses of CVD κ-Al2O3 coatings
804
Influence of microbubble surface charge on capillary transit and myocardial contrast enhancement
805
Influence of microcalcifications on vulnerable plaque mechanics using FSI modeling
806
Influence of microclimate and species interactions on the composition of plant and invertebrate communities in alpine northern Norway
807
Influence of micro-cracking and contact on the effective properties of composite materials
808
Influence of microcracking on crack-tip toughness of alumina
809
Influence of micro-cracking on the composite resistivity of Engineered Cementitious Composites
810
Influence of microcracks on a propagation of macrocracks
811
Influence of microdamage on fracture toughness of the human femur and tibia
812
Influence of microemulsion conditions on the VUV-excited luminescence and microstructures of Y3Al5O12: Eu3+ phosphors
813
Influence of microemulsion phases on the preparation of fine-disperse emulsions
814
Influence of microenvironment and liposomal formulation on secondary structure and bilayer interaction of lysozyme
815
Influence of microfractures and porosity on the physico-mechanical properties and weathering of ornamental granites
816
Influence of Microgravity on the Concentration of Circulating Primordial Germ Cells in Silky Chicken Offspring
817
Influence of microhabitat on seedling survival and growth of the mediterranean seagrass posidonia oceanica (l.) Delile
818
INFLUENCE OF MICROHABITAT TEMPERATURE ON COELAENOMENODERA ELAEIDIS AND ITS NATURAL ENEMIES IN NIGERIA
819
Influence of micro-habitats on the distribution of macroinvertebrates in Burkina Faso (West Africa)
820
Influence of micrometeorological factors on pesticide loss to the air during vine spraying: Data analysis with statistical and fuzzy inference models
821
Influence of micronization (fine grinding) of soya bean meal and fullfat soya bean on productive performance and digestive traits in young pigs
822
Influence of micronization (fine grinding) of soya bean meal and full-fat soya bean on the ileal digestibility of amino acids for broilers
823
Influence of micronization temperature and pre-conditioning on performance and digestibility in piglets fed barley-based diets
824
Influence of micronutrient concentration on growth and activity of sulfate reducing bacteria
825
Influence of microorganisms on Cu speciation in the rhizosphere of forest soils
826
Influence of microorganisms on Cu speciation in the rhizosphere of forest soils
827
Influence of microorganisms on the behavior of technetium and other elements in paddy soil surface water
828
Influence of microorganisms on the removal of nickel in tropical marine sediments (New Caledonia)
829
Influence of micropattern width on differentiation of human mesenchymal stem cells to vascular smooth muscle cells
830
Influence of micropolar lubricants on the performance of slot-entry hybrid journal bearing
831
Influence of micropore structure on Li-storage capacity in hard carbon spherules
832
Influence of microporosity and macroporosity on the mechanical properties of biphasic calcium phosphate bioceramics: Modelling and experiment
833
Influence of micro-porous layer and operating conditions on the fluoride release rate and degradation of PEMFC membrane electrode assemblies
834
INFLUENCE OF MICRORELIEF AND DOMINANT SPECIES ON THICKNESS OF HUMUS LAYERS ON SELECTED PLOTS IN NP ŠUMAVA
835
INFLUENCE OF MICROSCALE ENTERPRISE IN GROSS DOMESTIC PRODUCT
836
Influence of microscale turbulence on the phytoplankton of a temperate coastal embayment, Western Australia
837
Influence of microscopic particle interaction models on the flux of atmospheric antiprotons
838
Influence of microscopic transport coefficients on the formation probabilities for super-heavy elements Original Research Article
839
Influence of microscopically distributed inhomogeneity and anisotropy of grains on high-temperature crack propagation properties of directionally solidified superalloy
840
Influence of microshot peening on surface layer characteristics of structural steel
841
Influence of microstructural barriers on small fatigue crack growth in mild steel
842
Influence of microstructural characteristics on mechanical properties of ADC12 aluminum alloy
843
Influence of microstructural evolution on tensile properties of friction stir welded joint of rolled SiCp/AA2009-T351 sheet
844
Influence of microstructural features on the impact toughness of infiltrated Al2O3|P-steel composites
845
Influence of microstructural features on water, ion diffusion and transport in clay soils
846
Influence of microstructural inhomogeneities on the fracture toughness of modified 9Cr–1Mo steel at 298–823 K
847
Influence of microstructural inhomogeneity of individual sides of Fe81Si4B13C2 amorphous alloy ribbon on thermally induced structural transformations
848
Influence of microstructural parameters on mechanical behavior of polymer gels
849
Influence of microstructural parameters on strain localization in uniaxial tension
850
Influence of microstructural stability on the creep mechanism of Al–7 wt% Si alloy processed by equal channel angular pressing
851
Influence of microstructure and architecture on oxygen permeation of La(1−X)SrXFe(1−Y)(Ga, Ni)YO3−δ perovskite catalytic membrane reactor
852
Influence of microstructure and chemical composition on proton exchange membrane properties of sulfonated–fluorinated, hydrophilic–hydrophobic multiblock copolymers
853
Influence of microstructure and chemistry on the fracture toughness of dental ceramics
854
Influence of microstructure and crystallographic phases on the tribological properties of SiC obtained by spark plasma sintering
855
Influence of microstructure and deformation behavior on toughening of reactively compatibilized polyamide 6 and poly(ethylene-co-butyl acrylate) blends
856
Influence of microstructure and experimental parameters on the erosion–corrosion behavior of Al alloy composites
857
Influence of microstructure and its evolution on the mechanical behavior of modified MAR-M247 fine-grain superalloys at 871 °C
858
Influence of microstructure and load ratio on cyclic fatigue and final fracture behavior of two high strength steels
859
Influence of microstructure and microdefects on long-term fatigue behavior of a Cr–Mo–V steel
860
Influence of microstructure and phase composition on the nanoindentation characterization of bioceramic materials based on hydroxyapatite
861
Influence of microstructure and semi-crystalline morphology on the β and γ mechanical relaxations of the metallocene isotactic polypropylene
862
Influence of microstructure and strain distribution on failure properties in intermetallic TiAl-based alloys
863
Influence of microstructure and strain distribution on failure properties in intermetallic TiAl-based alloys
864
Influence of microstructure and strain rate on adiabatic shearing behavior in Ti–6Al–4V alloys
865
Influence of microstructure and surface defect on very high cycle fatigue properties of clean spring steel
866
Influence of microstructure and texture on the corrosion and tribocorrosion behavior of Ti–6Al–4V
867
Influence of microstructure and texture on the formability character of industrially produced galvannealed coatings on three interstitial free steels
868
Influence of microstructure and turning inserts on machinability and surface characteristics of Al–7Si and Al–7Si–2.5Cu cast alloys
869
Influence of microstructure evolution on mechanical strength of blown poly(ethylene terephthalate)
870
Influence of microstructure evolution on mechanical strength of blown poly(ethylene terephthalate)
871
Influence of microstructure of (α+β) Ti-6.2.4.6 alloy on high-cycle fatigue and tensile test behaviour
872
Influence of microstructure of concrete on size/scale effects in tensile fracture
873
Influence of microstructure of HC CoCrMo biomedical alloys on the corrosion and wear behaviour in simulated body fluids
874
Influence of microstructure of tungsten on solid state reaction rate with amorphous carbon film
875
Influence of microstructure on adiabatic shear localization of pre-twisted tungsten heavy alloys
876
Influence of microstructure on corrosion behavior of Ti–5%Ta–1.8%Nb alloy
877
Influence of microstructure on deformation behavior and fracture mode of Al–Mg–Si alloys
878
Influence of microstructure on electrical properties in BaZr0.5In0.5O3 − δ proton conductor
879
Influence of microstructure on erosion resistance of steels
880
Influence of microstructure on fracture toughness distribution in ceramic–metal functionally graded materials
881
Influence of microstructure on impact and wear behaviour of sintered Cr and Mo steel
882
Influence of microstructure on impact and wear behaviour of sintered Cr and Mo steel
883
Influence of microstructure on impact properties of 9–18%Cr ODS steels for fusion/fission applications
884
Influence of microstructure on local intra- and intergranular deformations during creep of a nickel-based superalloy at 700 °C
885
Influence of microstructure on magnetic and mechanical behavior in amorphous and nanocrystalline Fe73.5Nb4.5Cr5Cu1B16 alloy
886
Influence of microstructure on magnetic and mechanical behavior in amorphous and nanocrystalline Fe73.5Nb4.5Cr5Cu1B16 alloy
887
Influence of microstructure on mechanical properties of molybdenum alloyed P/M steels
888
Influence of microstructure on mechanical properties of molybdenum alloyed P/M steels
889
Influence of microstructure on micro-/nano-mechanical measurements of select model transparent poly(urethane urea) elastomers
890
Influence of microstructure on nano-mechanical properties of single planar solid oxide fuel cell in pre- and post-reduced conditions
891
Influence of microstructure on quasi-static and dynamic mechanical properties of bismuth-containing lead-free solder alloys
892
Influence of microstructure on slurry erosive wear characteristics of laser surface alloyed 13Cr–4Ni steel
893
Influence of microstructure on strain-controlled fatigue and fracture behavior of ultra high strength alloy steel AerMet 100
894
Influence of microstructure on tensile properties and fatigue crack growth in extruded magnesium alloy AM60
895
Influence of microstructure on the corrosion behavior of nitrocarburized AISI H13 tool steel obtained by pulsed DC plasma
896
Influence of microstructure on the corrosion resistance of AISI type 304L and type 316L sintered stainless steels exposed to ferric chloride solution
897
Influence of microstructure on the corrosion resistance of the duplex stainless steel UNS S31803
898
Influence of microstructure on the crack propagation and corrosion resistance of Al–Zn–Mg–Cu alloy 7150
899
Influence of microstructure on the electrical properties of NASICON materials
900
Influence of microstructure on the electrochemical performance of LiMn2−y−zLiyNizO4 spinel cathodes in rechargeable lithium batteries
901
Influence of microstructure on the erosion and erosion–corrosion characteristics of 316 stainless steel
902
Influence of microstructure on the erosive wear behaviour of Ca α-sialon materials
903
Influence of microstructure on the hydrogen permeation of alumina coatings
904
Influence of microstructure on the ionic conductivity of yttria-stabilized zirconia electrolyte
905
Influence of microstructure on the ionic conductivity of yttria-stabilized zirconia electrolyte
906
Influence of microstructure on the ionic conductivity of yttria-stabilized zirconia electrolyte
907
Influence of microstructure on the properties of Sr0.5Pb0.5TiO3 V-shaped PTCR
908
Influence of microstructure on the sliding wear behavior of nitrocarburized tool steels
909
Influence of microstructure on the wear mechanism of multilayered Ni coating deposited by ultrasound-assisted electrodeposition
910
Influence of microstructure on tribologically mixed layers
911
Influence of microstructure on wear behaviour of uncoated WC tools in turning of Alloy 718 and Waspaloy
912
Influence of microstructures and particle concentrations on the development of extrusion textures in metal matrix composites
913
Influence of microstructures and particle concentrations on the development of extrusion textures in metal matrix composites
914
Influence of micro-structures on bending properties of braided laminated composites
915
Influence of microstructures on exchange bias behaviors of La0.7Sr0.3MnO3/La0.33Ca0.67MnO3 bilayers
916
Influence of microstructures on fatigue damage mechanisms in Ti-15-3 alloy
917
Influence of microstructures on temperature distributions for some mixed problem of composite half-space
918
Influence of microtopography, ridge geometry and rainfall intensity on soil erosion induced by contouring failure
919
Influence of Microvesicles in Breast Cancer Metastasis and their Therapeutic Implications
920
Influence of microwave annealing on GMI response and magnetization of an amorphous Fe73.5Nb3Cu1Si13.5B9 ribbon
921
Influence of microwave application on convective drying: Effects on drying kinetics, and optical and mechanical properties of apple and strawberry Original Research Article
922
Influence of microwave heating on fluoride, chloride, nitrate and sulfate concentrations in water
923
Influence of microwave heating on the processing and dissolution behaviour of low-grade complex sulphide ores
924
Influence of microwave irradiation in the cyclohexane oxidation catalyzed by Fe(III) complexes
925
Influence of microwave irradiation on lipid oxidation and acceptance in peanut (Arachis hypogaea L.) seeds
926
Influence of microwave irradiation on the intraparticle diffusion of an insulin variant in reversed-phase liquid chromatography under linear conditions
927
Influence of microwave plasma pre-treatments of TiO2 electrodes on dye-sensitised solar cell efficiencies
928
Influence of microwave plasma treatment on the wettability and the adhesive properties of polyamides films with an epoxy resin
929
Influence of microwave plasma treatment on the wettability and the adhesive properties of polyamides films with an epoxy resin
930
Influence of microwave power, metal oxides and metal salts on the pyrolysis of algae
931
Influence of microwave pre-treatment on sludge solubilization and pilot scale semi-continuous anaerobic digestion
932
Influence of microwave pretreatment on the bioleaching behaviour of low-grade complex sulphide ores
933
Influence of microwave process on photoluminescence of europium-doped strontium aluminate phosphor prepared by a novel sol–gel-microwave process
934
Influence of microwave technology on cocarboxylase hydrochloride particle diversity and drying efficiency
935
Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena
936
Influence of microwave-assisted calcination on structural properties and oxide-ion performance of layered-perovskite γ-BIMNVOX solid electrolyte synthesized by ethylene glycol–citrate sol–gel route
937
Influence of migration distance, maturity and facies on the stable isotopic composition of alkanes and on carbazole distributions in oils and source rocks of the Alpine Foreland Basin of Austria
938
Influence of MII/MIII ratio in surface-charging behavior of Zn–Al layered double hydroxides
939
Influence of mild alkaline treatment on the cellulosic surfaces active sites
940
Influence of mild and severe wear condition in the formation and stability of friction film in clutch system
941
Influence of military land uses on soil carbon dynamics in forest ecosystems of Georgia, USA
942
Influence of milk centrifugation, brining and ripening conditions in preventing gas formation by Clostridium spp. in Gouda cheese
943
Influence of milk fat presence on the determination of trans fatty acids in fats used for infant formulae Original Research Article
944
INFLUENCE OF MILK ON THE CONTENT AND CHANGES OF MILK FAT DURING PRODUCTION OF SJENIČKI WHITE CHEESE
945
INFLUENCE OF MILK ON THE CONTENT AND TOTAL PROTEIN CHANGES DURING RIPENING WHITE CHEESE IN INDUSTRIAL PRODUCTION
946
Influence of milk proteins on the pasting behaviour and microstructural characteristics of waxy maize starch
947
Influence of milking and restricted suckling regimes on milk production and calf growth in temperate and tropical environments
948
Influence of Milking Frequency on Mammary Gland Dynamics
949
Influence of milking frequency on withdrawal period after application of β-lactam antibiotic-based drugs Original Research Article
950
Influence of mill additives on vitreous enamel properties
951
Influence of milling conditions on the FeAl intermetallic formation by mechanical alloying
952
Influence of milling conditions on the FeAl intermetallic formation by mechanical alloying
953
Influence of milling conditions on the wear resistance of mechanically alloyed aluminium
954
Influence of milling container internal geometry on the mechanical alloying process of the Fe75Si15B10 system
955
Influence of milling media on the microstructure and mechanical properties of mechanically milled and sintered aluminium
956
Influence of milling parameters on the manufacturing of Fe–TiCN composite powders
957
Influence of milling temperature and atmosphere on the synthesis of iron nitrides by ball milling
958
Influence of milling temperature and atmosphere on the synthesis of iron nitrides by ball milling
959
Influence of milling time in solid-state synthesis on structure, morphology and electrochemical properties of Li4Ti5O12 of spinel structure
960
Influence of milling time on mechanically assisted synthesis of Pb0.91Ca0.1TiO3 powders
961
Influence of Milling Time on Physical Properties and Proximate Chemical Composition of Some Egyption Rice Cultivars
962
Influence of milling time on the processing of Fe–TiCN composites
963
Influence of milling time on the synthesis, microstructure and mechanical properties of ZrB2SiCZrO2f ceramic composites
964
Influence of milling, sonication and fluoride doping of pseudoboehmites on their phase transformation behaviour to corundum
965
Influence of millipedes on litter decomposition, N mineralization, and microbial communities in a coastal forest in British Columbia, Canada
966
Influence of milrinone and norepinephrine on blood flow in canine internal mammary artery grafts
967
Influence of minced pork and rind ratios on physico-chemical and sensory quality of Nham – a Thai fermented pork sausage
968
Influence of minced pork and rind ratios on physico-chemical and sensory quality of Nham – a Thai fermented pork sausage
969
Influence of mineral additions on the performance of 100% recycled aggregate concrete
970
Influence of mineral admixtures on compressive strength, gas permeability and carbonation of high performance concrete
971
Influence of mineral admixtures on thermal conductivity and compressive strength of mortar
972
Influence of mineral and organic fertilizers on yield and nitrogen efficiency of winter wheat
973
Influence of mineral dust mixing-state and reaction probabilities on size-resolved sulfate formation in Northeast Asia
974
Influence of mineral dust transport on the chemical composition and physical properties of the Eastern Mediterranean aerosol
975
Influence of mineral impurities on the properties of kaolin and its thermally treated products
976
Influence of mineral matter in coal on decomposition of NO over coal chars and emission of NO during char combustion☆
977
Influence of mineral matter on pyrolysis of palm oil wastes
978
Influence of mineral particle size and choice of suitable parameters for ore sorting using near infrared sensors
979
Influence of mineral precipitation and dissolution on hydrologic properties of porous media in static and dynamic systems
980
Influence of mineral soil on the palatability of organic matter for lumbricid earthworms: A simple food preference study
981
Influence of mineral supplementation on 2,3-dihydroxypyridine toxicity in Angora goats
982
Influence of mineral transformation on the reactivity evolution during rice straw char–NO reaction
983
Influence of mineralogical composition of applied ball clays on properties of porcelain tiles
984
Influence of mineralogical composition on the properties of lightweight aggregate
985
Influence of mineralogy and firing temperature on the porosity of bricks
986
Influence of mineralogy and ore texture on pentlandite flotation at the Nkomati nickel mine, South Africa
987
Influence of mineralogy on the hydraulic properties of ladle slag
988
Influence of Minerals on the Aetiology of Geophagia in Periurban Dairy Cattle in the Derived Savannah of Nigeria
989
Influence of minerals on valerenic acid accumulation in hairy root cultures of Valeriana officinalis L.
990
Influence of minimally processed grapes washing with lemon essential oil
991
Influence of minimum element size to determine crack closure stress by the finite element method
992
Influence of Minimum Processing Procedures on the Quality of Sweet Cassava
993
Influence of mining rent on the efficiency of using natural potential: the paradox of plenty and its Russian specifics
994
Influence of minor addition of boron on tensile and fatigue properties of wrought Ti–6Al–4V alloy
995
Influence of minor addition of Pd, Ag or Au on the microstructural evolution of mechanically alloyed Zr–Ni alloys
996
INFLUENCE OF MINOR ADDITIONS OF NITROGEN AND TITANIUM ON THE CARBIDE MORPHOLOGY AND TRANSFORMATIONS IN CHROMIUM CAST IRONS
997
INFLUENCE OF MINOR ADDITIONS OF NITROGEN AND TITANIUM ON THE CARBIDE MORPHOLOGY AND TRANSFORMATIONS IN CHROMIUM CAST IRONS
998
Influence of minor aluminum concentration changes in zirconium-based bulk metallic glasses on the elastic, anelastic, and plastic properties Original Research Article
999
Influence of minor Si addition on the glass-forming ability and mechanical properties of Pd40Ni40P20 alloy Original Research Article
1000
Influence of mischmetal composition on crystallization and mechanical properties of Mg80–Ni10–MM10 alloys
