ليست عنوان مقالات لاتين Nanocrystalline state and solid state amorphization Nano-mechanics based modeling of lifetime distribution of quasibrittle structures

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Nanocrystalline state and solid state amorphization

2

Nanocrystalline state and solid state amorphization

3

Nanocrystalline steel processed by severe rolling of lath martensite

4

Nanocrystalline structure and magnetic properties of barium ferrite particles prepared via glycine as a fuel

5

Nanocrystalline structure and magnetic properties of barium ferrite particles prepared via glycine as a fuel

6

Nanocrystalline structure and nanopore formation in modified thermal TiO2 films

7

Nanocrystalline structure and phase transformation of the intermetallic compound TiAl processed by severe plastic deformation

8

Nanocrystalline structure formation in carbon steel introduced by high speed drilling

9

Nanocrystalline structure in Pd40Ni40P20 alloy

10

Nanocrystalline structure of WO3 thin films prepared by the sol-gel technique

11

Nanocrystalline tetragonal zirconia stabilized with yttrium and hydroxyls

12

Nanocrystalline thin films of CuInS2 grown by spray pyrolysis

13

Nanocrystalline thin films synthesized from a Ti2AlN compound target by high power impulse magnetron sputtering technique

14

Nanocrystalline thoria powders via glycine-nitrate combustion

15

Nanocrystalline TiC powder alloying and glazing of H13 steel using a CO2 laser for improved life of die-casting dies

16

Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by Selective Laser Melting (SLM): Densification, growth mechanism and wear behavior

17

Nanocrystalline TiN coatings with improved toughness deposited by pulsing the nitrogen flow rate

18

Nanocrystalline tin oxides and nickel oxide film anodes for Li-ion batteries

19

Nanocrystalline TiO2 (anatase) for Li-ion batteries

20

Nanocrystalline TiO2 as an efficient and reusable catalyst for the one-pot synthesis of polyhydroquinolien derivatives via Hantzsch reaction

21

Nanocrystalline TiO2 by sol–gel: Characterisation and photocatalytic activity on Modica and Comiso stones

22

Nanocrystalline TiO2 film with textural channels: Exhibiting enhanced performance in quasi-solid/solid-state dye-sensitized solar cells

23

Nanocrystalline TiO2 films treated with acid and base catalysts for dye-sensitized solar cells

24

Nanocrystalline TiO2 on single walled carbon nanotube arrays: Towards the assembly of organized C/TiO2 nanosystems Original Research Article

25

Nanocrystalline TiO2 photosensitized with natural polymers with enhanced efficiency from 400 to 600 nm

26

Nanocrystalline TiO2 thin films on soda-lime–silica glass by using a titanium naphthenate precursor

27

Nanocrystalline Ti-oxide-based solar cells made by sputter deposition and dye sensitization: Efficiency versus film thickness

28

Nanocrystalline titania-based sulfonic acid (TiO2-Pr-SO3H) as a new, highly efficient and recyclable solid acid catalyst for the N-Boc protection of amines at room temperature

29

Nanocrystalline titania-based sulfonic acid (TiO2-Pr-SO3H) as a new, highly efficient, and recyclable solid acid catalyst for preparation of quinoxaline derivatives

30

Nanocrystalline titanium nitride films prepared by electrophoretic deposition

31

Nanocrystalline titanium powders by high energy attrition milling

32

Nanocrystalline titanium produced by hydrostatic extrusion

33

Nanocrystalline transition metal ferrite thin films prepared by an electrochemical route for Li-ion batteries

34

Nanocrystalline trinitrotoluene (TNT) using sol–gel process

35

Nanocrystalline tungsten carbide encapsulated in carbon shells

36

Nano-crystalline tungsten oxide NO2 sensor

37

Nanocrystalline tungsten oxide thick-films with high sensitivity to H2S at room temperature

38

Nanocrystalline V2O5–TiO2 thin-films for oxygen sensing prepared by sol–gel process

39

Nanocrystalline WO3 films prepared by two-step annealing

40

Nanocrystalline yttria stabilized zirconia by metal–PVA complexation

41

Nanocrystalline zeolite beta: The effect of template agent on crystal size

42

Nanocrystalline zinc titanate synthesized via physicochemical route and its application as liquefied petroleum gas sensor

43

Nanocrystalline zirconia as catalyst support in methanol synthesis Original Research Article

44

Nanocrystalline zirconia powders synthesised by mechanochemical processing

45

Nanocrystalline zirconia powders synthesised by mechanochemical processing

46

Nanocrystalline Zn0.9Mn0.iS Thin Film: Case Studies

47

Nanocrystalline ZnO films prepared by pulsed laser deposition and their abnormal optical properties

48

Nanocrystalline ZnO films prepared by pyrolysis of Zn-arachidate LB multilayers

49

Nanocrystalline ZnO thin film for photocatalytic purification of water

50

Nanocrystalline ZnO thin films on porous silicon/silicon substrates obtained by sol–gel technique

51

Nanocrystalline ZnO(Ga): Paramagnetic centers, surface acidity and gas sensor properties

52

NANOCRYSTALLINE ZnSe FILMS PREPARED BY HIGH PRESSURE MAGNETRON SPUTTERING

53

Nano-crystalline Zr2ON2 thin films deposited by reactive magnetron sputtering

54

Nanocrystalline ZrO2 ceramics with idealized macropores

55

Nanocrystalline β-Ti alloy with high hardness, low Youngʹs modulus and excellent in vitro biocompatibility for biomedical applications

56

Nanocrystalline β-γ-β cyclic phase transformation in reacted ball milled MgH2 powders

57

Nanocrystalline–amorphous transitions in Al–Mo thin films: Bulk and surface evolution Original Research Article

58

Nanocrystalline-forming ability of alloys by melt-quenching Pages 9-16

59

Nanocrystalline‑modified nickel ferrite films: an effective sensor for industrial and environmental gas pollutant detection

60

Nanocrystallisation behaviour of Fe82Nb6B12 alloy

61

Nanocrystallisation behaviour of Fe82Nb6B12 alloy

62

Nanocrystallisation mechanisms in FeCuNbSiB-type alloys from comparative HREM, STM, TGM and calorimetric studies

63

Nanocrystallisation mechanisms in FeCuNbSiB-type alloys from comparative HREM, STM, TGM and calorimetric studies

64

Nanocrystallisation of amorphous alloys based on iron

65

Nanocrystallisation of amorphous alloys: comparison between furnace and current annealing

66

Nanocrystallisation of FeCuNbB alloys

67

Nanocrystallite compositions for Al- and Mo-containing Finemet-type alloys

68

Nanocrystallite effects on ion transport in molybdophosphate glasses

69

Nanocrystallite formation in Pd capped PrH3−δ films

70

Nanocrystallite interface effect and exchange bias phenomenology in Cr2O3 and NiO nanoparticles

71

Nanocrystallites in Bi–As–S system

72

Nanocrystallites-forming hierarchical porous Ni/Al2O3–TiO2 catalyst for dehydrogenation of organic chemical hydrides

73

Nano-crystallization and magnetic properties in the highly resistive Fe–Si–Zr–O films prepared by EB-PVD

74

Nano-crystallization and magnetic properties in the highly resistive Fe–Si–Zr–O films prepared by EB-PVD

75

Nano-crystallization and magnetic properties in the highly resistive Fe–Si–Zr–O films prepared by EB-PVD

76

Nanocrystallization and magnetic properties of Fe56Co7Ni7Zr2M8B20(M = Nb or Ta) Glassy alloys

77

Nanocrystallization and martensitic transformation in Fe–23.4Mn–6.5Si–5.1Cr (wt.%) alloy by surface mechanical attrition treatment

78

Nanocrystallization and structure of Fe78.5Ni1.0Mo0.5Si6.0B14.0 amorphous alloy

79

Nanocrystallization and α martensite formation in the surface layer of medium-manganese austenitic wear-resistant steel caused by shot peening

80

Nanocrystallization as a method of improvement of electrical properties and thermal stability of V2O5-rich glasses

81

Nano-crystallization behavior of Zr–Cu–Al bulk glass-forming alloy

82

Nanocrystallization behaviour of Al–Y–Ni with Cu additions

83

Nanocrystallization behaviour of Al–Y–Ni with Cu additions

84

Nanocrystallization behaviour of FeSiBCu(NbX) alloys

85

Nanocrystallization behaviour of FeSiBCu(NbX) alloys

86

Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons

87

Nanocrystallization in driven amorphous materials Original Research Article

88

Nanocrystallization in Fe73.5Si13.5B9Cu1Nb1X2 (X = Nb, Mo and V) alloys studied by X-ray synchrotron radiation

89

Nanocrystallization kinetics and magnetic properties of the melt spun amorphous (Fe0.5Co0.5)77Si11B9Cu0.6Nb2.4 alloy

90

Nanocrystallization kinetics of amorphous Fe81B13.5Si3.5C2 magnetic ribbons

91

Nanocrystallization kinetics of Ni-based bulk amorphous alloy

92

Nanocrystallization mechanisms in Finemet-type alloys from calorimetric studies

93

Nanocrystallization mechanisms in Finemet-type alloys from calorimetric studies

94

Nanocrystallization Mechanisms of Fe52Cr18Mo7B16C4Nb3 Bulk Amorphous Steel

95

Nanocrystallization of a CoNbBC metallic glass

96

Nanocrystallization of a nickel alloy subjected to surface severe plastic deformation

97

Nanocrystallization of a quenched RAFM steel and microstructure evolution during annealing heat treatment

98

Nanocrystallization of a Ti–50.0Ni(at.%) alloy by cold working and stress/strain behavior

99

Nanocrystallization of alloy 3J33 by a complex thermomechanical treatment process

100

Nanocrystallization of Al–Mm–Ni–(Fe, Co) alloys

101

Nanocrystallization of Al–Mm–Ni–(Fe, Co) alloys

102

Nanocrystallization of amorphous CoSiBFeNb alloys

103

Nanocrystallization of amorphous Fe33Zr67 alloy

104

Nanocrystallization of amorphous Fe–Si–B alloys using high current density electropulsing

105

Nanocrystallization of amorphous Fe–Si–B alloys using high current density electropulsing

106

Nanocrystallization of amorphous zirconia-germania mixed oxides prepared by sol–gel technique

107

Nanocrystallization of anatase in amorphous TiO2

108

Nanocrystallization of bulk ZrCuTi metallic glass

109

Nanocrystallization of bulk ZrCuTi metallic glass

110

Nanocrystallization of CaCO3 at solid/liquid interfaces in magnetic field: A quantum approach

111

Nanocrystallization of complex Fe23B6-type structure in glassy Fe–Co–B–Si–Nb alloy

112

Nano-crystallization of Fe36Cr12Mo10 phase in Fe55 − xCr18Mo7B16C4Nbx (X = 0, 3, 4) amorphous alloys

113

Nanocrystallization of Fe73.5Si13.5B9Nb3Cu1 soft-magnetic alloy from amorphous precursor in a magnetic field

114

Nanocrystallization of fresnoite glass. I. Nucleation and growth kinetics

115

Nanocrystallization of fresnoite glass. II. Analysis of homogeneous nucleation kinetics

116

Nanocrystallization of metallic glasses

117

Nanocrystallization of Ni–Fe–Nb–Si–B amorphous alloys

118

Nanocrystallization of Ni–Fe–Nb–Si–B amorphous alloys

119

Nanocrystallization of Pd74Si18Au8 metallic glass

120

Nanocrystallization of SrBi2Nb2O9 from glasses in the system Li2B4O7SrOBi2O3Nb2O5

121

Nano-crystallization of steel wire and its wear behavior

122

Nanocrystallization of Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 metallic glass Original Research Article

123

Nanocrystallization of Zr61Al7.5Cu17.5Ni10Si4 metallic glass

124

Nanocrystallization process and ferromagnetic properties of amorphous (Fe0.99Mo0.01)78Si9B13 ribbons

125

Nanocrystallization process and mechanism in a nickel alloy subjected to surface severe plastic deformation Original Research Article

126

Nanocrystallization-induced structural evolution of intergranular amorphous phase in Fe78B13Si9 alloy

127

Nanocrystallized ceria-based coatings prepared by electrochemistry on TA6V titanium alloy

128

Nanocrystallized SnO2 thin films deposited on Si and LaAlO3 substrates by pulsed-MOCVD technique for electrochemical applications

129

Nanocrystallized steel surface by micro-shot peening for catalyst-free carbon nanotube growth

130

Nanocrystal-reinforced soy protein films and their application as active packaging

131

Nanocrystals as destructive absorbants for mimcs of chemical warfare agents

132

Nanocrystals as stoichiometric reagents with unique surface chemistry. New adsorbents for air purification

133

Nanocrystals at MBE-grown GaNrGaAs 001/ interfaces

134

Nanocrystals depth profiling by means of Cs+ in negative polarity with dual beam ToF-SIMS

135

Nanocrystals for the parenteral delivery of poorly water-soluble drugs

136

Nanocrystals formation and fractal microstructural assessment in Au/Ge bilayer films upon annealing

137

Nanocrystals formation on Ho3+ doped strontium barium niobate glass

138

Nanocrystals Forming Mesoscopic Structures

139

Nano-crystals of various lanthanide fluorides prepared using the ionic liquid bmimPF6

140

Nanocrystals precipitation and up-conversion luminescence in Yb3+-Tm3+ co-doped oxyfluoride glasses

141

Nano-crystals precipitation and upconversion luminescence properties in Er3+/Yb3+ co-doped fluoride phosphate glass-ceramics

142

Nano-CT characterization of the microstructure in the nonwoven polishing wheel

143

Nano-Cu catalyze hydrogen production from formaldehyde solution at room temperature

144

Nano-Cu/PSA III modified glassy carbon electrode for simultaneous determination of ascorbic acid, dopamine and uric acid

145

Nano-CuFe2O4-supported sulfonic acid as a novel and recyclable nanomagnetic acid for diazotization of aromatic amines: efficient synthesis of various azo dyes

146

Nanocurcumin as a radioprotective agent against radiationinduced mortality in mice

147

Nanocurcumin Decreases Nucleotide-Binding Oligomerization Domain-Like Receptor Family Pyrin Domain-Containing 3 Complex Expressions in An Experimental Testicular Torsion Model

148

Nano-curcumin Effects on Ischemic Stroke clinical outcomes and Interleukin-6 Levels: Pilot Randomized Clinical Trial

149

Nanocurcumine Ameliorates Lipopolysaccharide-induced Depressivelike Behavior in Mice

150

Nanocurcumin-Mediated Down-Regulation of Telomerase Via Stimulating TGFβ1 Signaling Pathway in Hepatocellular Carcinoma Cells

151

Nano-deformation of a Ni–P coating surface after nanoparticle impacts

152

Nano-deposition on 3-D open-cell aluminum foam materials for improved energy absorption capacity

153

Nano-designing of Mg doped phosphate tungsten bronzes and SiO2 composite obtained by ultrasonic spray pyrolysis method

154

Nano-designing of Mg doped phosphate tungsten bronzes and SiO2 composite obtained by ultrasonic spray pyrolysis method

155

Nanodevices for studying nano-pathophysiology

156

Nanodevices for the Life Sciences

157

Nanodevices may hold key for detecting early-stage cancer

158

Nanodevices that explore the synergies between PDCs and carbon nanotubes

159

Nano-Devitrification and Structural Evolution of Rapidly Solidified Amorphous Al-TM (Cu-Co)-Y (at.%) Alloy

160

Nanodiamond MALDI support for enhancing the credibility of identifying proteins

161

Nanodiamond nucleation below 2273 K at 15 GPa from carbons with different structural organizations Original Research Article

162

Nanodiamond particles/reduced graphene oxide composites as efficient supercapacitor electrodes

163

Nanodiamond powder compaction via laser shockwaves: Experiments and finite element analysis

164

Nanodiamond-based tribosystems

165

Nanodiamond-containing composites for tissue scaffolds and surgical implants: A review

166

Nanodiamond-mediated crystallization in fibers of PANI nanocomposites produced by template-free polymerization: Conductive and thermal properties of the fibrillar networks

167

Nanodiffraction and dark-field STEM characterization of single-walled carbon nanotube ropes

168

Nanodiffraction and dark-field STEM characterization of single-walled carbon nanotube ropes

169

Nano-dimension pore structure analysis of poly (ethyleneterephthalate) knitted materials: An insight combining SEM images

170

Nanodimensional AlMCM-41 material for adsorption of dyes: Thermodynamic and kinetic studies

171

Nanodimensional microreactors encapsulation of 15- and 16-membered diaza dioxa macrocyclic Schiff-base copper(II) complex nanoparticles: Synthesis and characterization

172

Nano-dimensions for the pyrogallol[4]arene cavity

173

Nano-disassembling method—A new method for preparing completely exfoliated epoxy/clay nanocomposites

174

Nanodisks of Au and Ag produced by laser ablation in liquid environment

175

Nanodispersed Au/Al2O3 catalysts for low-temperature CO oxidation: Results of research activity at the Boreskov Institute of Catalysis

176

Nanodispersed eugenol has improved antimicrobial activity against Escherichia coli O157:H7 and Listeria monocytogenes in bovine milk

177

Nanodispersed iron, tin and antimony in vapour grown carbon fibres for lithium batteries: an EPR and electrochemical study Original Research Article

178

Nanodispersed polymer gel electrolytes: Conductivity modification with the addition of PMMA and fumed silica

179

Nanodispersing thymol in whey protein isolate-maltodextrin conjugate capsules produced using the emulsion–evaporation technique Original Research Article

180

Nanodispersions of bubbles and oil drops in water

181

Nanodispersions of carbon nanofiber for polyurethane foaming

182

Nanodispersive mixed oxides for destruction of warfare agents prepared by homogeneous hydrolysis with urea Original Research Article

183

Nanodisturbances in deformed Gum Metal Original Research Article

184

Nanodomain analysis via coincidence ion mass spectrometry

185

Nano-domain behaviour in P3HT:PCBM nanoparticles, relating material properties to morphological changes

186

Nanodomain formation and distribution in Gd-doped ceria

187

Nanodomain structure and its effect on abnormal thermal expansion behavior of a Ti–23Nb–2Zr–0.7Ta–1.2O alloy Original Research Article

188

Nanodomains in a hydrophilic–hydrophobic IPN based on poly(2-hydroxyethyl acrylate) and poly(ethyl acrylate)

189

Nano-dot formation using self-assembled 3-mercaptopropionic acid thin films prepared by facile atmospheric-vapor-adsorption method on Au(1 1 1)

190

Nanodot hexagonal ordered arrays on GaSb substrates by LEIS under the presence of chromium diffused impurities

191

Nano-dot markers for electron tomography formed by electron beam-induced deposition: Nanoparticle agglomerates application

192

Nano-dot markers for electron tomography formed by electron beam-induced deposition: Nanoparticle agglomerates application

193

Nanodots-induced pinning centers in thin films: effects on critical current density, activation energy and flux jump rate

194

Nanodroplet formation and exclusive homogenously nucleated crystallization in confined electrospun immiscible polymer blend fibers of polystyrene and poly(ethylene oxide)

195

Nano-droplet formation in water/ethanol or isopropanol/mosquito repellent formulations

196

Nanodroplet impact and sliding on structured polymer surfaces

197

Nanodroplet profiling of enzymatic activities in a microarray

198

Nanodroplets on a solid plane: wetting and spreading in a Monte Carlo simulation Original Research Article

199

Nanodrug particles and nanoformulations for drug delivery

200

Nanodrugs and Natural Pharmaceutical Products

201

Nano-ductile crack propagation in glasses under stress corrosion: spatiotemporal evolution of damage in the vicinity of the crack tip

202

Nano-dynamics: engineering allostery via tandem duplication and turn energetics

203

Nano-effects, quantum-like properties in electrospun nanofibers

204

Nanoelectrochemistry and nanophysics at electrochemical interfaces

205

Nanoelectromechanical carbon nanotube memory analysis

206

Nanoelectromechanical devices for sensing applications

207

Nanoelectromechanical devices for sensing applications

208

Nanoelectromechanical devices with carbon nanotubes

209

Nanoelectromechanical quantum circuits and systems

210

Nanoelectromechanics and single-charge tunneling

211

Nano-electromembrane extraction Original Research Article

212

Nanoelectronics

213

Nanoelectronics centers founded: Funding

214

Nanoelectrospray with ion-trap mass spectrometry for the determination of beta-casomorphins in derived milk products

215

Nanoembossing and piezoelectricity of ferroelectric Pb(Zr0.3,Ti0.7)O3 nanowire arrays

216

Nano-emulsification of orange peel essential oil using sonication and native gums

217

Nanoemulsification of pseudo-ceramide by molecular association with mannosylerythritol lipid

218

Nanoemulsified green tea extract shows improved hypocholesterolemic effects in C57BL/6 mice

219

Nanoemulsion- and emulsion-based delivery systems for curcumin: Encapsulation and release properties

220

Nanoemulsion delivery systems: Influence of carrier oil on β-carotene bioaccessibility

221

Nanoemulsion drug delivery by ketene based polyester synthesized using electron rich carbon/silica composite surface

222

Nano-emulsion formation by emulsion phase inversion

223

Nanoemulsion strategy for olmesartan medoxomil improves oral absorption and extended antihypertensive activity in hypertensive rats

224

Nanoemulsion-based delivery systems for poorly water-soluble bioactive compounds: Influence of formulation parameters on polymethoxyflavone crystallization

225

226

Nanoemulsions of Green Tea Catechins and Other Natural Compounds for the Treatment of Urinary Tract Infection: Antibacterial Analysis

227

Nanoemulsions of β-carotene using a high-energy emulsification–evaporation technique Original Research Article

228

Nano-emulsions preparation by low energy methods in an ionic surfactant system

229

Nanoemulsions with enhanced temperature stability using thermo-sensitive association of nonionic surfactant and amphiphilic polyelectrolytes

230

Nanoemulsions: a new vehicle for skincare products

231

Nanoemulsions: colloidal topical delivery systems for antiacne agents- A Mini-Review

232

Nano-emulsions: Formation by low-energy methods

233

Nano-emulsions: New applications and optimization of their preparation

234

Nanoemulsions: Preparation, Structure, Functional Properties and their Antimicrobial Effects

235

Nanoencapsulated anti-CK2 small molecule drug or siRNA specifically targets malignant cancer but not benign cells

236

Nanoencapsulation and characterization of Albizia chinensis isolated antioxidant quercitrin on PLA nanoparticles

237

Nanoencapsulation and delivery of curcumin using some carbohydrate based systems: A review

238

Nanoencapsulation of an active peptidic fraction from sea bream scales collagen

239

Nanoencapsulation of bovine lactoferrin for food and biopharmaceutical applications

240

Nano-encapsulation of coenzyme Q10 using octenyl succinic anhydride modified starch

241

nanoencapsulation of hirudo medicinalis proteins in liposomes as a nanocarrier for inhibiting angiogenesis through targeting vegfa in the breast cancer cell line (mcf-7)

242

Nano-Encapsulation of Lemon Essential Oil Approach to Reducing the Oxidation Process in Fish Burger during Refrigerated Storage

243

Nanoencapsulation of n-butanol extract of Symphytum kurdicum and Symphytum asperrimum: Focus on phytochemical analysis, anti-oxidant and antibacterial activity

244

Nanoencapsulation of Phthalate from Melastomastrum Capitatum (Fern.) in Chitosan-Nps as a Target Mediated Drug Delivery for Multi-Drug Resistant Pathogen

245

Nano-encapsulation of thyme essential oil in chitosan-Arabic gum system: evaluation of its antioxidant and antimicrobial properties

246

Nano-encapsulation of thyme essential oil in chitosan-Arabic gum system: Evaluation of its antioxidant and antimicrobial properties

247

Nanoencapsulation of Thyme Extract with Antifungal and Antioxidant Effects

248

Nanoencapsulation systems to improve solubility and antioxidant efficiency of a grape marc extract into hazelnut paste Original Research Article

249

Nanoencapsulation via interfacially confined reversible addition fragmentation transfer (RAFT) miniemulsion polymerization

250

Nanoengineered catalysts for high-temperature methane partial oxidation

251

Nanoengineered liquid mirrors shaped by thermal fields

252

Nanoengineered micro gold shells for LDI-TOF analysis of small molecules Original Research Article

253

Nanoengineered optical urea biosensor for estimating hemodialysis parameters in spent dialysate Original Research Article

254

Nanoengineered polyelectrolyte micro- and nano-capsules as fluorescent potassium ion sensors

255

Nanoengineered polymeric S-layers based capsules with targeting activity

256

Nano-engineered ultra-high-gain microchannel plates

257

Nano-engineered ultra-high-gain microchannel plates

258

Nanoengineering of doxorubicin delivery systems with functionalized maghemite nanoparticles

259

Nanoengineering of materials for field emission display technologies

260

Nanoengineering of optical resonances

261

Nanoengineering of organic semiconductors for light-emitting diodes: control of charge transport

262

Nano-engineering of zirconia–noble metals composites

263

Nanoengineering thermoelectrics for 21st century: Energy harvesting and other trends in the field

264

Nanoengineering with residual catalyst from CNT templates Original Research Article

265

Nano-enhanced reverse osmosis membranes Review Article

266

Nanoepitaxy of SnO2 on α-Al2O3(0 1 2)

267

Nanoepitaxy on quasicrystal surfaces

268

NanoESCA: imaging UPS and XPS with high energy resolution

269

Nanoethics: The Ethical and Social Implications of Nanotechnology

270

Nanoethosomes for Dermal Delivery of Lidocaine

271

Nano-explosion synthesis of multi-component ceramic nano-composites

272

Nano-extraction and nano-condensation for C60 incorporation into single-wall carbon nanotubes in liquid phases

273

Nano-fabricated cdw by ion-beam irradiation

274

Nanofabricated refractive index sensor based on photon tunneling in nanofluidic channel

275

Nanofabrication and characterization of ZnO nanorod arrays and branched microrods by aqueous solution route and rapid thermal processing

276

Nanofabrication and the structure-property analyses of phase-change alloy-ended CNTs

277

Nanofabrication aspects of silicon-based spin quantum gates

278

Nanofabrication aspects of silicon-based spin quantum gates

279

Nanofabrication in polymer matrices

280

Nanofabrication in transparent materials with a femtosecond pulse laser

281

Nanofabrication of a gold fiducial array on specimen support for electron tomography

282

Nanofabrication of a gold fiducial array on specimen support for electron tomography

283

Nanofabrication of cylindrical STEM specimen of InGaAs/GaAs quantum dots for 3D-STEM observation

284

Nanofabrication of cylindrical STEM specimen of InGaAs/GaAs quantum dots for 3D-STEM observation

285

Nanofabrication of cylindrical STEM specimen of InGaAs/GaAs quantum dots for 3D-STEM observation

286

Nano-fabrication of double gyroid network structure via ozonolysis of matrix phase of polyisoprene in poly(2-vinylpyridine)-block-polyisoprene films

287

Nanofabrication of helical hybrid silica nanotubes using anionic gelators

288

Nanofabrication of superconducting MgB2 neutron detector

289

Nanofabrication of superconducting MgB2 neutron detector

290

Nano-fabrication of surface relief gratings on azo dye films utilizing interference of evanescent waves on prism

291

Nanofabrication of tungsten supertip by electron-beam-induced deposition

292

Nanofabrication of Zinc Ferrite (ZnFe2O4) composites for biomedical application

293

Nano-fabrication on Si oxiderSi surface by using STM: a low energy electron beam stimulated reaction

294

Nanofabrication using computer-assisted design and automated vector-scanning probe lithography

295

Nanofabrication using liquid helium films

296

Nanofabrication via atom optics

297

Nanofaceting of unit cells and temperature dependence of the surface reconstruction and morphology of Si(1 0 5) and (1 0 3)

298

Nanofacet-resolved CO oxidation kinetics on alumina-supported Pd particles

299

Nano-Fe3O4 as a heterogeneous recyclable magnetically separable catalyst for synthesis of nitrogen fused imidazoheterocycles via double C-N bond formation

300

Nano-Fe3O4 attached to Crosslinked sulfonated polyacrylamide (Cross-PAA-SO3H) as high performance catalyst for the synthesis of thiazoles under ultrasonic irradiations

301

Nano-Fe3O4@ZrO2-SO3H as highly efficient recyclable catalyst for the green synthesis of fluoroquinolones in ordinary or magnetized water

302

Nano-Ferrite ZnFe2O4 as Efficient and Re-Usable Catalyst for the Synthesis of 4H-Chromenes and 4H-Pyrano[2,3-c] pyrazoles

303

Nano-ferroelectric based core–shell particles: towards tuning of dielectric properties

304

Nano-Fertilizers and Nano-pesticides: Benevolence for Sustainable Agriculture

305

Nanofertilizers and their roles in sustainable agriculture

306

Nanofiber alignment and direction of mechanical strain affect the ECM production of human ACL fibroblast

307

Nanofiber coated hybrid yarn fabricated by novel electrospinning-airflow twisting method

308

Nanofiber coating of surfaces for intensification of drop or spray impact cooling

309

Nanofiber density determines endothelial cell behavior on hydrogel matrix

310

Nanofiber Expansion of Umbilical Cord Blood Hematopoietic Stem Cells

311

Nanofiber garlands of polycaprolactone by electrospinning

312

Nanofiber membranes—Evaluation of gas transport

313

Nanofiber micelles from the self-assembly of block copolymers

314

Nano-fiber scaffold electrodes based on PEDOT for cell stimulation

315

Nanofiber scaffold repairs brain tissue: Biomaterials

316

Nanofiber size-dependent sensitivity of fibroblast directionality to the methodology for scaffold alignment

317

Nanofiber technology: Designing the next generation of tissue engineering scaffolds

318

Nanofiber topography and sustained biochemical signaling enhance human mesenchymal stem cell neural commitment

319

Nanofiber toughened polyethylene composites

320

Nanofiber-based delivery of bioactive agents and stem cells to bone sites

321

Nanofiber-based polyelectrolytes as novel membranes for fuel cell applications

322

Nanofiberization of inner helical mesoporous silica using chiral gelator as template under a shear flow

323

Nanofibers and nanoplatelets of MoO3 via an electrospinning technique Original Research Article

324

Nanofibers and spheres by polymerization of cyanoacrylate monomer

325

Nanofibers based on polysaccharides from the green seaweed Ulva Rigida

326

Nanofibers doped with a phosphorescent iridium complex: Synthesis, characterization, and photophysical property study

327

Nanofibers from gas-assisted polymer melt electrospinning

328

Nanofibers from methoxy functionalized para-phenylene molecules

329

Nanofibers in regenerative medicine and drug delivery

330

Nanofibers in thin-film composite membrane support layers: Enabling expanded application of forward and pressure retarded osmosis Original Research Article

331

Nanofibers of conducting polyaniline for aromatic organic compound sensor

332

Nanofibers of polyaniline synthesized by interfacial polymerization

333

Nanofibers of polyethylene produced by SBA-15 supported zirconium catalyst [N-(3-tert-butylsalicylidene)-4′-allyloxylanilinato]2Zr(IV)Cl2

334

Nanofibers of self-doped polyaniline

335

Nanofibres from polyaniline/polyhydroxybutyrate blends

336

Nanofibres of CA/PAN with high amount of carbon nanotubes by core–shell electrospinning

337

Nanofibril reinforced composites from polymer blends

338

Nanofibrillar cellulose aerogels

339

Nanofibrillated cellulose composite hydrogel for the replacement of the nucleus pulposus

340

Nanofibrillated cellulose from Alfa, Eucalyptus and Pine fibres: Preparation, characteristics and reinforcing potential

341

Nanofibrillated cellulose from TEMPO-oxidized eucalyptus fibres: Effect of the carboxyl content

342

Nanofibrillated chitosan/polycaprolactone bionanocomposite scaffold with improved tensile strength and cellular behavior

343

Nano-fibrils formation of pBTTT via adding alkylthiol into solutions: Control of morphology and crystalline structure

344

Nanofibrils from Nylon 6/Polypropylene-g-maleic anhydride/Polypropylene Blended Filaments

345

Nano-Fibrous and Tubular Poly (Lactic Acid) Scaffolds for Vascular Tissue Engineering

346

Nanofibrous Calcite Synthesized via a Solution-Precursor-Solid Mechanism

347

Nanofibrous carbon with herringbone structure as an effective catalyst of the H2S selective oxidation Original Research Article

348

Nanofibrous chitosan non-wovens for filtration applications

349

Nanofibrous filtering media: Filtration problems and solutions from tiny materials

350

Nanofibrous mats coated by homocharged biopolymer-layered silicate nanoparticles and their antitumor activity

351

Nanofibrous mats layer-by-layer assembled via electrospun cellulose acetate and electrosprayed chitosan for cell culture

352

Nanofibrous mats of poly(trimethylene terephthalate) via electrospinning

353

Nanofibrous membrane based tyrosinase-biosensor for the detection of phenolic compounds Original Research Article

354

Nanofibrous membrane of wool keratose/silk fibroin blend for heavy metal ion adsorption

355

Nanofibrous membrane-based absorption refrigeration system

356

Nanofibrous microfiltration membranes capable of removing bacteria, viruses and heavy metal ions

357

Nanofibrous modification on ultra-thin poly(e-caprolactone) membrane via electrospinning

358

Nano-fibrous poly( -lactic acid) scaffolds with interconnected spherical macropores

359

Nanofibrous poly(acrylonitrile-co-maleic acid) membranes functionalized with gelatin and chitosan for lipase immobilization

360

Nanofibrous polyethyleneimine membranes as sensitive coatings for quartz crystal microbalance-based formaldehyde sensors

361

Nanofibrous polyhydroxyalkanoate matrices as cell growth supporting materials

362

Nanofibrous Pt-Ba Lean NOx trap catalyst with improved sulfur resistance and thermal durability

363

Nano-fibrous scaffolding promotes osteoblast differentiation and biomineralization

364

Nanofibrous ultrafiltration membranes containing cross-linked poly(ethylene glycol) and cellulose nanofiber composite barrier layer

365

Nanofibrous γ-Al2O3 as support for Co-based Fischer–Tropsch catalysts: Pondering the relevance of diffusional and dispersion effects on catalytic performance

366

Nanofibrous-like ZnO layers deposited by magnetron sputtering and their integration in dye-sensitized solar cells

367

Nanofilled and microhybrid composite restorations: Five-year clinical wear performances

368

Nano-filler Co-nanoparticles embedded in a Silica aerogel matrix

369

Nanofiller incorporated poly(vinylidene fluoride–hexafluoropropylene) (PVdF–HFP) composite electrolytes for lithium batteries

370

Nanofiller loading level: Influence on selected properties of an adhesive resin

371

Nanofiller loading level: Influence on selected properties of an adhesive resin

372

Nanofiller reinforcement of elastomeric polyurea

373

Nanofillers in polymeric matrix: a study on silica reinforced PA6

374

Nanofillers modification of Epocast 50-A1/946 epoxy for bonded joints

375

Nanofilms with clusters of boron suboxide and their infrared absorption

376

Nanofilter for hydrogen purification

377

Nanofiltration and adsorption on powdered adsorbent as process combination for the treatment of severely contaminated waste water Original Research Article

378

Nanofiltration and calcium sulfate limitation for top brine temperature in Gulf desalination plants Original Research Article

379

Nanofiltration and reverse osmosis in winemaking Original Research Article

380

Nanofiltration and reverse osmosis of model process waters fromthe dairy industry to produce water for reuse Original Research Article

381

Nanofiltration and reverse osmosis thin film composite membrane module for the removal of dye and salts from the simulated mixtures Original Research Article

382

Nanofiltration and ultrafiltration of endocrine disrupting compounds, pharmaceuticals and personal care products

383

Nanofiltration as a final step towards textile wastewater reclamation Original Research Article

384

Nanofiltration as energy-efficient solution for sulfate waste in vacuum salt production Original Research Article

385

Nanofiltration as key technology for the separation of LA and AA

386

Nanofiltration concentrate disposal: experiences in The Netherlands Original Research Article

387

Nanofiltration coupled with electrolytic oxidation in treating simulated dye wastewater

388

Nanofiltration coupled with vapor permeation-assisted esterification as an effective purification step for fermentation-derived succinic acid

389

Nanofiltration flux, fouling and retention in filtering dilute model waters Original Research Article

390

Nanofiltration for drinking water production from deep well water

391

Nanofiltration for oil-fields water injection operations: analysis of concentration polarization Original Research Article

392

Nanofiltration for oil-fields water injection operations: analysis of osmotic pressure and scale tendency Original Research Article

393

Nanofiltration for sulfate removal and water reuse of the pickling and tanning processes in a tannery Original Research Article

394

Nanofiltration for the possible reuse of water and recovery of sodium chloride salt from textile effluent Original Research Article

395

Nanofiltration for the recovery of caustic cleaning-in-place solutions: robustness towards large variations of composition Original Research Article

396

Nanofiltration for the separation of pharmaceuticals from nutrients in source-separated urine

397

Nanofiltration in non-aqueous solutions by porous silica–zirconia membranes

398

Nanofiltration membrane bioreactor for removing pharmaceutical compounds

399

Nanofiltration membrane modification by UV grafting for salt rejection and fouling resistance improvement for brackish water desalination Original Research Article

400

Nanofiltration membrane performance on fluoride removal from water

401

Nanofiltration membrane prepared from cardo polyetherketone ultrafiltration membrane by UV-induced grafting method

402

Nanofiltration membrane prepared from polyacrylonitrile ultrafiltration membrane by low-temperature plasma: 2. Grafting of styrene in vapor phase

403

Nanofiltration membrane prepared from polyacrylonitrile ultrafiltration membrane by low-temperature plasma: 4. grafting of N-vinylpyrrolidone in aqueous solution Original Research Article

404

Nanofiltration membrane prepared from polyacrylonitrile ultrafiltration membrane by low-temperature plasma: 5. Grafting of styrene in vapor phase and its application

405

Nanofiltration membrane prepared from polyacrylonitrile ultrafiltration membrane by low-temperature plasma: I. Graft of acrylic acid in gas

406

Nanofiltration membranes modified with alkoxysilanes: Surface characterization using zeta-potential

407

Nanofiltration membranes prepared by interfacial polymerization on thin-film nanofibrous composite scaffold

408

Nanofiltration membranes synthesized from hyperbranched polyethyleneimine

409

Nanofiltration Membranes Synthesized from Polyethyleneimine for Removal of MgSO4 from Aqueous Solution

410

Nanofiltration membranes to reduce phenol concentration in wastewater Original Research Article

411

Nanofiltration of a clarified fermentation broth

412

Nanofiltration of a German groundwater of high hardness and NOM content: performance and costs Original Research Article

413

Nanofiltration of a simulated tannery wastewater: influence of chlorides concentration Original Research Article

414

Nanofiltration of Bayer process solutions

415

Nanofiltration of biogenic amines in acidic conditions: Influence of operation variables and modeling

416

Nanofiltration of biologically treated effluents from the pulp and paper industry

417

Nanofiltration of biologically treated textile effluents using ozone as a pre-treatment Original Research Article

418

Nanofiltration of bivalent nickel cations — model parameter determination and process simulation Original Research Article

419

Nanofiltration of brackish groundwater by using a polypiperazine membrane Original Research Article

420

Nanofiltration of CIP waters from iodine X-ray contrast media production: process design and modelling Original Research Article

421

Nanofiltration of concentrated acidic copper sulphate solutions Original Research Article

422

Nanofiltration of concentrated amino acid solutions Original Research Article

423

Nanofiltration of glucose and sodium lactate solutions: Variations of retention between single- and mixed-solute solutions

424

Nanofiltration of glucose solution containing salts: Effects of membrane characteristics, organic component and salts on retention Original Research Article

425

Nanofiltration of highly concentrated salt solutions up to seawater salinity Original Research Article

426

Nanofiltration of low-contaminated textile rinsing effluents for on-site treatment and reuse Original Research Article

427

Nanofiltration of l-phenylalanine and l-aspartic acid aqueous solutions

428

Nanofiltration of monosaccharide containing solution to recover xylose Original Research Article

429

Nanofiltration of multi-component feeds. Interactions between neutral and charged components and their effect on retention

430

Nanofiltration of NaCl solutions using a SPPO membrane (BQ01) Part 1. Membrane characterization and separation mechanisms Original Research Article

431

Nanofiltration of NaCl solutions using a SPPO membrane (BQ01) Part 2. Membrane behavior with an electric field Original Research Article

432

Nanofiltration of natural organic matter with H2O2/UV pretreatment: fouling mitigation and membrane surface characterization

433

Nanofiltration of nitric acidic solutions from picture tube production Original Research Article

434

Nanofiltration of Nonionic Surfactants: Effect of the Molecular Weight Cutoff and Contact Angle on Flux Behavior

435

Nanofiltration of partial oxidation products and copper from catalyzed wet peroxidation of phenol Original Research Article

436

Nanofiltration of river water — fouling, cleaning and micropollutant rejection Original Research Article

437

Nanofiltration of secondary effluent for wastewater reuse in the textile industry Original Research Article

438

Nanofiltration of single and mixture solutions containing anionics and nonionic surfactants below their critical micelle concentrations (CMCs)

439

Nanofiltration of solutions containing surfactants—prediction of flux decline and modelling of mass transfer Original Research Article

440

Nanofiltration of textile industry wastewater using a physicochemical process as a pre-treatment Original Research Article

441

Nanofiltration of textile wastewater for water reuse Original Research Article

442

Nanofiltration of UHT flash cooler condensates from a dairy factory: Characterisation and water reuse potential Original Research Article

443

Nanofiltration of wastewater from the fishmeal industry

444

Nanofiltration of wastewaters from the fish meal industry Original Research Article

445

Nanofiltration process applied to the tannery solutions Original Research Article

446

Nanofiltration process for separating Cr(III) from acid solutions: Experimental and modelling analysis Original Research Article

447

Nanofiltration process for the nutritional enrichment and refining of rice bran oil Original Research Article

448

Nanofiltration regeneration of contaminated single-phase detergents used in the dairy industry Original Research Article

449

Nanofiltration studies of larger organic microsolutes in methanol solutions

450

Nanofiltration study of the interaction between bicarbonate and nitrate ions Original Research Article

451

Nanofiltration thin-film composite polyester polyethersulfone-based membranes prepared by interfacial polymerization

452

Nanofiltration thin-film-composite polyesteramide membranes based on bulky diols Original Research Article

453

Nanofiltration, bipolar electrodialysis and reactive extraction hybrid system for separation of fumaric acid from fermentation broth

454

Nanofiltration-based diafiltration process for solvent exchange in pharmaceutical manufacturing

455

Nanoflagellates of the central California waters: taxonomy, biogeography and abundance of primitive, green flagellates (Pedinophyceae, Prasinophyceae)

456

Nanoflake CoN as a high capacity anode for Li-ion batteries

457

Nanoflakes to nanorods and nanospheres transition of selenious acid doped polyaniline

458

Nanoflare heating in the quiet corona: evidence and problems Original Research Article

459

Nano-floating gate organic memory devices utilizing Ag–Cu nanoparticles embedded in PVA-PAA-glycerol polymer

460

Nanoflow Gradient Generator Coupled with (mu)-LC-ESI-MS/MS for Protein Identification

461

Nanoflow gradient generator for capillary high-performance liquid chromatography–nanoelectrospray mass spectrometry

462

Nanoflow liquid chromatography–tandem mass spectrometry for the characterization of intact phosphatidylcholines from soybean, bovine brain, and liver

463

Nanoflow microreactor for dramatic increase not only in reactivity but also in selectivity: Baeyer–Villiger oxidation by aqueous hydrogen peroxide using lowest concentration of a fluorous lanthanide catalyst

464

Nano-flow multidimensional liquid chromatography with electrospray ionization time-of-flight mass spectrometry for proteome analysis of hepatocellular carcinoma Original Research Article

465

Nanoflow system for perfect regiocontrol in the Baeyer–Villiger oxidation by aqueous hydrogen peroxide using lowest concentration of a fluorous lanthanide catalyst

466

Nanofluid as a coolant for electronic devices (cooling of electronic devices)

467

Nanofluid boiling: The effect of surface wettability

468

Nanofluid concept for enhancement of hydrogen utilization and gasoline production in fixed bed reactor Fischer–Tropsch synthesis of GTL (gas to liquid) technology

469

Nanofluid Condensation and MHD Flow Modeling over Rotating Plates Using Least Square Method (LSM)

470

Nanofluid convective heat transfer in a parallel-disk system

471

Nanofluid effects on peristaltic transport of a fourth grade fluid in the occurrence of inclined magnetic field

472

Nanofluid flow and heat transfer over a stretching porous cylinder considering thermal radiation

473

Nanofluid Flow Comprising Gyrotactic Microorganisms through a Porous Medium

474

Nanofluid Flow in a Semi-porous Channel in the Presence of Uniform Magnetic Field

475

Nanofluid flow over an unsteady stretching surface in presence of thermal radiation

476

Nanofluid for enhanced oil recovery

477

Nanofluid multi-phase convective heat transfer in closed domain: Simulation with lattice Boltzmann method

478

Nanofluid Predication Of Lid Driven Mixed Convection In Square Cavity With Adiabatic Elliptic Body

479

Nanofluid stability optimization based on UV-Vis spectrophotometer measurement

480

Nanofluid stabilizes and enhances convective boiling heat transfer in a single microchannel

481

Nanofluid Thermal Conductivity Prediction Model Based on Artificial Neural Network

482

Nanofluid-Based Nanocarbons: An Investigation of Thermal Conductivity Performance

483

Nanofluidic channels by anodic bonding of amorphous silicon to glass to study ion-accumulation and ion-depletion effect

484

Nanofluidic flow-induced longitudinal and transverse vibrations of inclined stocky single-walled carbon nanotubes

485

Nanofluidic Networks Based on Surfactant Membrane Technology

486

Nanofluidics in carbon nanotubes

487

Nanofluidics: what is it and what can we expect from it?

488

Nanofluids and critical heat flux, experimental and analytical study

489

Nanofluids Applications in Solar Energy Systems: A Review

490

Nanofluids containing carbon nanotubes treated by mechanochemical reaction

491

Nanofluids droplets evaporation kinetics and wetting dynamics on rough heated substrates

492

Nanofluids for Heat Transfer Enhancement-A Review

493

494

Nano-fluorophores as enhanced diagnostic tools to improve cellular imaging

495

Nanofoaming in the surface of biopolymers by femtosecond pulsed laser irradiation

496

Nanoforming behaviour and microstructural evolution during nanoimprinting of ultrafine-grained and nanocrystalline metals

497

Nanoformulation innovations: Revolutionizing precision in migraine therapy

498

Nanoformulation of natural products for prevention and therapy of prostate cancer

499

Nano-formulation of paclitaxel by vitamin E succinate functionalized pluronic micelles for enhanced encapsulation, stability and cytotoxicity

500

Nanoformulation: An efficient approach to natural insect repellent formulations

501

Nanofractal surface structure under laser sintering of titanium and nitinol for bone tissue engineering

502

Nanofretting behaviors of monocrystalline silicon (1 0 0) against diamond tips in atmosphere and vacuum

503

Nanofretting behaviours of ultrathin DLC coating on Si(1 0 0) substrate

504

Nanofriction of silicon oxide surfaces covered with thin water films

505

Nanofuels: Combustion, engine performance and emissions

506

Nanog Is the Gateway to the Pluripotent Ground State

507

Nanog: A New Recruit to the Embryonic Stem Cell Orchestra

508

Nanogap Dielectric Biosensor for Label Free DNA Hybridization Detection

509

Nanogap-based electrical hydrogen sensors fabricated from Pd-PMMA hybrid thin films

510

Nanogel and superparamagnetic nanocomposite based on sodium alginate for sorption of heavy metal ions

511

Nanogel scavengers for drugs: Local anesthetic uptake by thermoresponsive nanogels

512

Nanogel-modified polycaprolactone microfibres with controlled water uptake and degradability

513

Nanogels for Oligonucleotide Delivery to the Brain

514

Nano-gels: A versatile nano -carrier platform for drug delivery systems: A review

515

Nanogeochemistry: Nanostructures, emergent properties and their control on geochemical reactions and mass transfers

516

Nanogeoscience in ore systems research: Principles, methods, and applications: Introduction and preface to the special issue

517

Nanoglass Fe79B21 powders prepared by chemical reduction: A low-temperature Mössbauer study

518

Nanoglass in lithia–silica system grown within pores of pellets comprising CuO nanoparticles

519

Nanogold based electrochemical sensor for determination of norepinephrine in biological fluids

520

Nanogold based electrochemical sensor for determination of norepinephrine in biological fluids

521

Nano-gold catalysts on Fe-modified ceria for pure hydrogen production via WGS and PROX: Effect of preparation method and Fe-doping on the structural and catalytic properties Original Research Article

522

Nanogold on powdered cobalt oxide for carbon monoxide sensor

523

Nano-gold supported on Fe2O3: A highly active catalyst for low temperature oxidative destruction of methane green house gas from exhaust/waste gases Original Research Article

524

Nano-gold supported on TiO2 coated glass-fiber for removing toxic CO gas from air

525

Nanogold-actuated biomimetic peroxidase for sensitized electrochemical immunoassay of carcinoembryonic antigen in human serum Original Research Article

526

Nanogold-functionalized magnetic beads with redox activity for sensitive electrochemical immunoassay of thyroid-stimulating hormone Original Research Article

527

Nanogold–polyaniline–nanogold microspheres-functionalized molecular tags for sensitive electrochemical immunoassay of thyroid-stimulating hormone Original Research Article

528

Nanografting for Surface Physical Chemistry

529

Nano-grain Al2O3 crystals grown by sputtering of aluminium on CoCrPt thin films for potential application in ultra-high-density recording media

530

Nanograin deposition via an electroplating reaction in an emulsion of dense carbon dioxide in a nickel electroplating solution using nonionic fluorinated surfactant

531

Nano-grain evolution in austenitic stainless steel during multi-directional forging

532

Nanograin Mn–Zn ferrite smart cores to miniaturize electronic devices

533

Nano-grain SnO2 electrodes for high conversion efficiency SnO2–DSSC

534

Nano-grain structure of nickel films prepared by emulsion plating using dense carbon dioxide

535

Nano-grained 70/30 brass strip produced by accumulative roll-bonding (ARB) process

536

Nano-grained copper strip produced by accumulative roll bonding process

537

Nano-grained pure copper with high-strength and high-conductivity produced by equal channel angular rolling process

538

Nanograined Sc-doped BaZrO3 as a proton conducting solid electrolyte for intermediate temperature solid oxide fuel cells (IT-SOFCs)

539

Nano-grained thin-film indium tin oxide gas sensors for H2 detection

540

Nanograined Ti–Nb microalloy steel achieved by Accumulative Roll Bonding (ARB) process

541

Nanogranular packing of C–S–H at substochiometric conditions

542

Nanogranulation process into magneto-resistant Co–Cu alloy on the route of bulk mechanical alloying

543

Nanogranulation process into magneto-resistant Co–Cu alloy on the route of bulk mechanical alloying

544

Nano-graphene structures deposited by N-IR pulsed laser ablation of graphite on Si

545

Nano-graphene/polyimide composites with extremely high rubbery plateau modulus Original Research Article

546

Nanographene-based host–guest systems Original Research Article

547

Nanographite assembled films for sensitive NO2 detection

548

Nano-graphite cold cathodes for electric solar wind sail

549

Nano-graphite deposits on multi-walled carbon nanotubes induced by low energy ion beam irradiation in a methane and hydrogen mixture

550

Nano-graphite platelet loaded with LiFePO4 nanoparticles used as the cathode in a high performance Li-ion battery Original Research Article

551

Nanographite ribbons grown from a SiC arc-discharge in a hydrogen atmosphere

552

Nanographite sheets derived from polyaniline nanocoating of cellulose nanofibers

553

Nanographite structures formed during annealing of disordered carbon containing finely-dispersed carbon nanocapsules with iron carbide cores Original Research Article

554

Nanographite-reinforced carbon/carbon composites Original Research Article

555

Nano-graphitic clustering and break down of phonon selection rule in diamond-like carbon films

556

Nano-grass polyimide-based humidity sensors

557

Nano-grass polyimide-based humidity sensors

558

Nanogravimetric and voltammetric DNA-hybridization biosensors for studies of DNA damage by common toxicants and pollutants Original Research Article

559

Nanogravimetry study of the processes of anodic dissolution and oxide-film formation at a gold electrode in aq. HClO4 containing Br− ions by means of EQCN

560

Nanogroove formation during homoepitaxial Au electrodeposition on reconstructed Au( 1 1 1)

561

Nanohalos: A manifestation of electron channelling in gold nanoparticles

562

Nanohalos: A manifestation of electron channelling in gold nanoparticles

563

Nanohardness and contact angle of Si wafers implanted with N and C and Al alloy with N by plasma ion implantation

564

Nanohardness and elastic modulus at the interface of TiCx/Ni3Al composites determined by the nanoindentation technique

565

Nanohardness and tribological properties of nc-TiB2 coatings

566

Nano-hardness and wear properties of C-implanted Nylon 6

567

Nanohardness of molybdenum in the vicinity of grain boundaries and triple junctions Original Research Article

568

Nanohardness of nanocrystalline TiN thin films

569

Nano-hardness testing with ultrasonic excitation

570

Nano-hardness, wear resistance and pseudoelasticity of hafnium implanted NiTi shape memory alloy

571

Nanoheat source generated by leaky light mode within a nano-waveguide for small electrical power generator

572

Nanoheterogeneous catalytic hydrogenation of N-, O- or S-heteroaromatic compounds by re-usable aqueous colloidal suspensions of rhodium(0)

573

Nano-heterogeneous structure of (1-x)KNbO3–xSiO2 glasses in the low glass-forming oxide content range 0.05 ≤ x ≤ 0.3

574

Nano-high-performance liquid chromatography–electron ionization mass spectrometry approach for environmental analysis Original Research Article

575

Nanohole 3D-size tailoring through polystyrene bead combustion during thin film deposition

576

Nanohole arrays in metal films as optofluidic elements: progress and potential

577

Nanohole processing on silicon substrate by femtosecond laser pulse with localized surface plasmon polariton

578

Nanohole volume dependence on the cure schedule in epoxy thermosetting networks: A PALS study

579

Nanohybrid based on layered zinc hydroxide with salicylic acid drug: Investigation of the structure and controlled release properties

580

Nano-hybrid carboxymethyl-hexanoyl chitosan modified with (3-aminopropyl)triethoxysilane for camptothecin delivery

581

Nanohybrid materials from interlayer functionalization of kaolinite. Application to the electrochemical preconcentration of cyanide

582

Nanohybrid Platform of Functionalized Graphene Oxide for ChemoPhotothermal Therapy

583

Nanohybrid polymer prepared by successive polymerization of methacrylate monomer containing silver nanoparticles in situ prepared under microwave irradiation

584

Nanohybrid vs. fine hybrid composite in Class II cavities: Clinical results and margin analysis after four years

585

Nanohybrid vs. fine hybrid composite in extended Class II cavities after six years

586

Nanohybrid-layered double hydroxides/urease materials: Synthesis and application to urea biosensors

587

Nano-Hybrids Based on Surface Modified Reduced Graphene Oxide Nanosheets and Carbon Nanotubes and a Regioregular Polythiophene

588

Nano-hybrids incorporation into poly(ε-caprolactone) for multifunctional applications: Mechanical and barrier properties

589

Nanohybrids investigation by waveguide SNOM illumination mode

590

Nanohybrids of edible dyes intercalated in ZnAl layered double hydroxides Original Research Article

591

Nanohybrids of Mg/Al layered double hydroxide and long-chain (C18) unsaturated fatty acid anions: Structure and sorptive properties

592

Nanohybrids of phenolic antioxidant intercalated into MgAl-layered double hydroxide clay

593

Nano-hydrocarbon and the accumulation in coexisting source and reservoir

594

Nano-Hydroxyapatite and Calcium-Enriched Mixture for Pulp Capping of Sound Primary Teeth: A Randomized Clinical Trial

595

Nanohydroxyapatite and its polycaprolactone nanocomposite for lead sorbent from aqueous solution

596

Nanohydroxyapatite coating on a titanium–niobium alloy by a hydrothermal process

597

Nanohydroxyapatite increases BMP-2 expression via a p38 MAP kinase dependent pathway in periodontal ligament cells

598

Nano-hydroxyapatite reinforced polyhydroxybutyrate composites: A comprehensive study on the structural and in vitro biological properties

599

Nanohydroxyapatite synthesized from kombucha SCOBY and its effect on ovariectomized-induced osteoporosis in rats

600

Nanohydroxyapatite versus melatonin loaded on nanohydroxyapatite and nanohydroxyapatite with platelet rich fibrin on the treatment of intrabony defects

601

Nanohydroxyapatite/poly(ester urethane) scaffold for bone tissue engineering

602

Nano-hydroxyapatite/polyacrylamide composite hydrogels with high mechanical strengths and cell adhesion properties

603

Nano-hydroxyapatite—Cellulose acetate composites for growing of bone cells

604

Nanohydroxyapatite–chitosan–gelatin polyelectrolyte complex with enhanced mechanical and bioactivity

605

Nano-icosahedral Al–Mn–Ce phases: structure and local configurations

606

Nano-icosahedral Al–Mn–Ce phases: structure and local configurations

607

Nano-image profiles transferred by near field phase-shifting lithography precisely simulated by finite element method and fabricated

608

Nanoimmunoassay onto a screen printed electrode for HER2 breast cancer biomarker determination

609

Nano-impact test on a TiAlN PVD coating and correlation between experimental and FEM results

610

Nano-impact testing—an effective tool for assessing the resistance of advanced wear-resistant coatings to fatigue failure and delamination

611

Nanoimprint lithography using IR laser irradiation

612

Nanoimprint lithography: an alternative nanofabrication approach

613

Nanoimprint patterning for tunable light trapping in large-area silicon solar cells

614

Nanoimprinted electrodes for micro-fuel cell applications

615

Nanoimpurities in the superfluid 3He Original Research Article

616

Nano-inclusion suite and high resolution micro-computed-tomography of polycrystalline diamond (framesite) from Orapa, Botswana

617

Nanoinclusions in microdiamonds from Neogenic sands of the Ukraine (Samotkanʹ placer): A TEM study

618

Nanoincorporation of layered double hydroxides into a miscible blend system of cellulose acetate with poly(acryloyl morpholine)

619

Nanoincorporation of Plumbagin in Micelles Increase Its In Vivo Anti-Plasmodial Properties

620

Nanoindentation ‘pop-in’ phenomenon in epitaxial ZnO thin films on sapphire substrates

621

Nanoindentation analysis of the pop-in events on SiGe single layer Original Research Article

622

Nanoindentation analysis of time-dependent deformation in as-cast and annealed Cu–Zr bulk metallic glass

623

Nanoindentation analysis of αtricalcium phosphate-poly(lactide-co-glycolide) nanocomposite degradation

624

Nanoindentation and Brillouin light scattering studies of elastic moduli of sodium silicate glasses

625

Nanoindentation and corrosion studies of TiN/NiTi thin films for biomedical applications

626

Nanoindentation and microtribological behavior of Fe–N/Ti–N multilayers with different thickness of Ti–N layers

627

Nanoindentation and morphological studies on injection-molded nylon-6 nanocomposites

628

Nanoindentation and morphological studies on nylon 66 nanocomposites. I. Effect of clay loading

629

Nanoindentation and morphological studies on nylon 66/organoclay nanocomposites. II. Effect of strain rate

630

Nanoindentation and nanomachining characteristics of gold and platinum thin films

631

Nanoindentation and nanoscratch behaviors of Ag/Ni multilayers

632

Nanoindentation and nanoscratch behaviors of DLC coatings on different steel substrates

633

Nano-indentation and nano-scratch of polymer/glass interfaces. II: model of interphases in water aged composite materials

634

Nanoindentation and nanoscratch profiles of hybrid films based on (γ-methacrylpropyl)trimethoxysilane and tetraethoxysilane Original Research Article

635

Nanoindentation and nanoscratch properties of a thermal oxidation treated γ-TiAl based alloy

636

Nanoindentation and nanoscratch properties of mullite-based environmental barrier coatings: Influence of chemical composition — Al/Si ratio

637

Nanoindentation and nanoscratch testing of uniaxially and biaxially drawn poly(ethylene terephthalate) film

638

Nanoindentation and nanoscratching of iron: Atomistic simulation of dislocation generation and reactions

639

Nanoindentation and nanotribological behavior of Fe-N/Ti-N multilayers with different thickness of Fe-N layers

640

Nanoindentation and nanowear of extremely thin protective layers of C–N and B–C–N

641

Nanoindentation and nanowear study of Sn and Ni–Sn coatings

642

Nanoindentation and storage of teeth

643

Nanoindentation and tapping mode AFM study of phase separation in poly(ethyl acrylate-co-hydroxyethyl methacrylate) copolymer networks

644

Nanoindentation and the indentation size effect: Kinetics of deformation and strain gradient plasticity

645

Nano-indentation and wear-resistance behaviors of TiCN films by pulsed plasma on cemented carbide cutting tool

646

Nanoindentation and whole-bone bending estimates of material properties in bones from the senescence accelerated mouse SAMP6

647

Nanoindentation and XRD investigations of single crystalline Ni–Ge brazed nickel-base superalloys PWA 1483 and René N5

648

Nanoindentation as a means for distinguishing clinical type of osteogenesis imperfecta

649

Nanoindentation as a tool for characterising the mechanical properties of tribological transfer films

650

Nanoindentation assessment of aluminium metallisation; the effect of creep and pile-up

651

Nanoindentation behavior of a two-dimensional carbon-carbon composite for nuclear applications Original Research Article

652

Nanoindentation behavior of bulk metastable Al65Cu20Ti15 alloy prepared by consolidation of the ball milled powder

653

Nanoindentation behavior of nanotwinned Cu: Influence of indenter angle on hardness, strain rate sensitivity and activation volume

654

Nanoindentation behavior of ultrathin polymeric films

655

Nanoindentation behaviors of amorphous carbon films containing nanocrystalline graphite and diamond clusters prepared by radio frequency sputtering

656

Nanoindentation behaviour of aluminium based hybrid composites with graphite nanofiber/alumina short fiber

657

Nanoindentation behaviour of nano BiFeO3

658

Nanoindentation characteristics of alkali-activated aluminosilicate materials

659

Nanoindentation characterization of deformation and failure of aluminum oxynitride Original Research Article

660

Nanoindentation characterization of ErT2 thin films

661

Nanoindentation characterization of GaN epilayers on A-plane sapphire substrates

662

Nanoindentation characterization of intermetallic compounds formed between Sn–Cu (–Ni) ball grid arrays and Cu substrates

663

Nanoindentation characterization of SiC-based ceramics

664

Nanoindentation characterization of surface layers of electrical discharge machined WC–Co

665

Nanoindentation characterization of surface layers of electrical discharge machined WC–Co

666

Nanoindentation characterization of surface layers of electrical discharge machined WC–Co

667

Nanoindentation characterization of ZnO thin films

668

Nanoindentation combined with scanning force microscope for characterization of mechanical properties of carbon nitride thin films

669

Nanoindentation creep behavior in a CoCrFeCuNi high-entropy alloy film with two different structure states

670

Nanoindentation creep behaviors of amorphous, tetragonal, and bcc Ta films

671

Nanoindentation creep of tin and aluminium: A comparative study between constant load and constant strain rate methods

672

Nanoindentation creep of ultrafine-grained Al2O3 particle reinforced copper composites

673

Nanoindentation creep versus bulk compressive creep of dental resin-composites

674

Nanoindentation derived stress–strain properties of dental materials

675

Nanoindentation discriminates the elastic properties of individual human bone lamellae under dry and physiological conditions

676

Nanoindentation effect on the optical properties of self-assembled quantum dots

677

Nano-indentation fracture test of Pb(Zr0.52Ti0.48)O3 ferroelectric thin films Original Research Article

678

Nanoindentation hardness and structure of ion beam sputtered TiN, W and TiN/W multilayer hard coatings

679

Nanoindentation hardness of hot-pressed boron suboxide

680

Nanoindentation hardness of intertubular dentin in sound, demineralized and natural caries-affected dentin

681

Nanoindentation hardness of mineralized tissues

682

Nanoindentation hardness of submicrometer alumina ceramics

683

Nanoindentation hardness of submicrometer alumina ceramics

684

Nanoindentation identifications of mechanical properties of Cu6Sn5, Cu3Sn, and Ni3Sn4 intermetallic compounds derived by diffusion couples

685

Nanoindentation in polymer nanocomposites

686

Nanoindentation investigation of amorphous hydrogenated carbon thin films deposited by ECR-MPCVD

687

Nanoindentation investigation of creep properties of calcium silicate hydrates

688

Nanoindentation investigation of heavy ion irradiated Ti3(Si,Al)C2

689

Nanoindentation investigation of mechanical properties of ZrO2, ZrO2–Y2O3, Al2O3 and TiO2 thin films deposited on stainless steel OC 404 substrate by spray pyrolysis

690

Nanoindentation mapping of mechanical properties of cement paste and natural rocks

691

Nanoindentation mapping of the mechanical properties of human molar tooth enamel

692

Nano-indentation measurement of oxide layers formed in LBE on F/M steels

693

Nanoindentation measurements and mechanical testing of as-soldered and aged Sn–0.7Cu lead-free miniature joints

694

Nanoindentation measurements of combustion CVD Al2O3 and YSZ films

695

Nanoindentation measurements of combustion CVD Al2O3 and YSZ films

696

Nanoindentation measurements of the mechanical properties of polycrystalline Au and Ag thin films on silicon substrates: Effects of grain size and film thickness

697

Nanoindentation measurements on modified diamond-like carbon thin films

698

Nanoindentation modeling of a nanodot-patterned surface on a deformable substrate

699

Nanoindentation of Al2O3/Al2TiO5 composites: Small-scale mechanical properties of Al2TiO5 as reinforcement phase

700

Nanoindentation of annealed Naf ion/sulfonated graphene oxide nanocomposite membranes for the measurement of mechanical properties

701

Nanoindentation of binary and ternary Ni–Ti-based shape memory alloy thin films

702

Nanoindentation of biological materials

703

Nanoindentation of biomembrane by carbon nanotubes – MD simulation

704

Nanoindentation of Bridgman YBCO samples

705

Nanoindentation of chromium zigzag thin films sputter deposited

706

Nanoindentation of functionally graded hybrid polymer/metal thin films

707

Nanoindentation of glass wool fibers

708

Nanoindentation of hard multilayer coatings: Finite element modelling

709

Nanoindentation of LaCrO3 thin films

710

Nanoindentation of laser micromachined 3C-SiC thin film micro-cantilevers

711

Nanoindentation of lead-free solders in microelectronic packaging

712

Nanoindentation of lithium niobate: hardness anisotropy and pop-in phenomenon

713

Nanoindentation of lithium niobate: hardness anisotropy and pop-in phenomenon

714

Nanoindentation of melt-extracted amorphous YAG and YAG:Eu, Nd micrometric fibers synthesized by the citrate precursor method

715

Nanoindentation of model diamond nanocomposites: Hierarchical molecular dynamics and finite-element simulations

716

Nanoindentation of model Fe–Cr alloys with self-ion irradiation

717

Nanoindentation of nano-Al/Si3N4 multilayers with Vickers and Brinell indenters

718

Nanoindentation of nanocrystalline Ni with geometrically different indenters

719

Nanoindentation of nanocrystalline Ni with geometrically different indenters

720

Nanoindentation of neat and in situ polymers in polymer–matrix composites

721

Nanoindentation of orthodontic archwires: The effect of decontamination and clinical use on hardness, elastic modulus and surface roughness

722

Nanoindentation of osteonal bone lamellae

723

Nanoindentation of osteonal bone lamellae

724

Nanoindentation of palladium–hydrogen

725

Nanoindentation of Pb/Sn solder alloys; experimental and finite element simulation results

726

Nanoindentation of polymeric thin films with an interfacial force microscope

727

Nanoindentation of porous bulk and thin films of La0.6Sr0.4Co0.2Fe0.8O3−δ Original Research Article

728

Nanoindentation of pristine and disordered silica: Molecular Dynamics simulations

729

Nanoindentation of rare earth–Sn intermetallics in Pb-free solders

730

Nanoindentation of shape memory polymer networks

731

Nanoindentation of shock deformed alumina

732

Nanoindentation of single-crystalline gold thin films: Correlating hardness and the onset of plasticity Original Research Article

733

Nanoindentation of submicron polymeric coating systems

734

Nanoindentation of the insertional zones of human meniscal attachments into underlying bone

735

Nanoindentation of thin-film-substrate system: Determination of film hardness and Youngʹs modulus

736

Nanoindentation of vertical ZnO nanowires

737

Nanoindentation of WC–Co hardmetals

738

Nano-indentation on amorphous calcium phosphate splats: Effect of droplet size on mechanical properties

739

Nanoindentation on carbon thin films obtained from a C60 ion beam

740

Nanoindentation on crystal/amorphous polyethylene: Molecular dynamics study

741

Nanoindentation on diamond-like carbon and alumina coatings

742

Nanoindentation on hybrid organic/inorganic silica aerogels

743

Nanoindentation on ion irradiated steels

744

Nano-indentation on nickel aluminate spinel and the influence of acid and alkaline attacks on the spinel surface

745

Nanoindentation on soft film/hard substrate and hard film/soft substrate material systems with finite element analysis

746

Nanoindentation on the surface of thermally sprayed coatings

747

Nanoindentation response of an ion irradiated Zr-based bulk metallic glass

748

Nanoindentation response of novel hydroxyapatite–mullite composites

749

Nanoindentation response of PEEK modified by mesh-assisted plasma immersion ion implantation

750

Nanoindentation response of substrate-attached and freestanding single-crystalline Fe7Pd3 ferromagnetic shape memory thin films around the martensite transition: The impact of constraints and beyond

751

Nanoindentation response of zinc titanate thin films deposited by co-sputtering process

752

Nanoindentation reveals mechanical properties within thermally sprayed hydroxyapatite coatings

753

Nanoindentation simulation of PE/POSS under different shapes of indenters

754

Nanoindentation size effect in single-crystal nanoparticles and thin films: A comparative experimental and simulation study Original Research Article

755

Nanoindentation studies of (111) GaAs/InP epilayers

756

Nano-indentation studies of hard coatings prepared by laser ablation

757

Nanoindentation studies of MOVPE grown GaAs/InP heterostructures

758

Nanoindentation studies of multilayer amorphous carbon films Original Research Article

759

Nanoindentation studies of shear banding in fully amorphous and partially devitrified metallic alloys

760

Nanoindentation studies of shear banding in fully amorphous and partially devitrified metallic alloys

761

Nanoindentation studies of titanium single crystals

762

Nanoindentation studies on amorphous carbon nitride thin films prepared by shielded arc ion plating

763

Nanoindentation studies on Cu–Ti–Zr–Ni–Si–Sn bulk metallic glasses

764

Nanoindentation studies on MWCNT/aluminum alloy 6061 nanocomposites

765

Nanoindentation studies on precipitation hardening of Ti-rich Ti50.4Ni49.5Si0.1 shape memory ribbons

766

Nanoindentation study of amorphous-Co79Zr13Nb8/Cr multilayers

767

Nanoindentation study of calcium silicate hydrates in concrete produced with effective microorganisms-based bioplasticizer

768

Nanoindentation study of deformation-resistant Al/a-Si core–shell nanostructures Original Research Article

769

Nanoindentation study of human premolars subjected to bleaching agent

770

Nanoindentation study of magnetron-sputtered CrN and CrSiN coatings

771

Nanoindentation study of microplasma sprayed hydroxyapatite coating

772

Nanoindentation study of size effect on shear transformation zone size in a Ni–Nb metallic glass

773

Nanoindentation study of the mechanical and damage behaviour of suspension plasma sprayed TiO2 coatings

774

Nanoindentation study of ultrafine WC–10Co cemented carbide

775

Nanoindentation study of WC–12Co hardmetals obtained from nanocrystalline powders: Evaluation of hardness and modulus on individual phases

776

Nanoindentation study of Zn-based Pb free solders used in fine pitch interconnect applications

777

Nanoindentation study on the creep resistance of SnBi solder alloy with reactive nano-metallic fillers

778

Nano-indentation study on the mechanical properties of TiC/Mo multilayers deposited by ion beam assisted deposition

779

Nanoindentation System for Material Properties Identification

780

Nano-indentation testing for plasma-based ion-implanted surface of plastics

781

Nanoindentation testing on copper/diamond-like carbon bi-layer films

782

Nanoindentation tests to assess polymerization of resin-based luting cement

783

Nanoindentation with spherical tips of single crystals of YBCO textured by the Bridgman technique: Determination of indentation stress–strain curves

784

Nanoindentation, AFM and tribological properties of thin nc-WC/a-C Coatings

785

Nanoindentation, TEM and ToF-SIMS studies of the tribological layer system of cylindrical roller thrust bearings lubricated with different oil additive formulations

786

Nano-indentation: A tool to investigate crack propagation related phase transitions in PV silicon

787

Nanoindentation: hardness and phase transition in silicon

788

Nanoindentation: hardness and phase transition in silicon

789

Nanoindentation: hardness and phase transition in silicon

790

Nanoindentation: Measuring methods and applications

791

Nanoindentation: Unload-to-load work ratio analysis in amorphous carbon films for mechanical properties

792

Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles

793

Nanoindentation-induced delamination of submicron polymeric coatings

794

Nanoindentation-induced phase transformation in (1 1 0)-oriented Si single-crystals

795

Nanoinjection Lithography for Submicrometer Electrodes on Polymer Substrates

796

Nanoinjector for Capillary Electrophoresis and Capillary Electrochromatography

797

Nanoinks in inkjet metallization — Evolution of simple additive-type metal patterning

798

Nano-in-micro alginate based hybrid particles

799

Nanointercalates—novel class of materials with promising properties1

800

Nano-interface engineering of CorGerSi systems: metal incorporation into Ge quantum dots and SiO rSi structures

801

Nano-interfacial space charge and single electron tunneling conduction in metal/polyimide/metal junctions

802

803

Nano-ionics in the context of lithium batteries

804

Nano-iron fertilizer effects on some plant traits of dragonhead (Dracocephalum moldavica L.) under different sowing densities

805

Nanoisland shape relaxation mechanism

806

Nanojunction effects in multiple ZnO nanowire gas sensor

807

Nano-kaolin/Ti(IV)/Fe3O4: a Natural Based Magnetic Nano-catalyst for the Synthesis of Coumarins

808

NANOLAB-a tool for evaluating reliability of defect-tolerant nanoarchitectures

809

NANOLAB-a tool for evaluating reliability of defect-tolerant nanoarchitectures

810

Nanolabel for TNF-α determination

811

Nano-LaFeO3 powder preparation by calcining an emulsion precursor

812

Nanolamellar structure obtained by simple crystallization of an amorphous cobalt-based magnetic alloy

813

Nanolaminates of Zirconia and Silica Using Atomic Layer Deposition

814

Nano-lamination in amorphous carbon for tailored coating in micro-dry stamping of AISI-304 stainless steel sheets

815

Nanolayer (Ti,Cr)N coatings for hard particle erosion resistance

816

Nanolayer barriers for inhibition of copper corrosion

817

Nanolayer CrNx/WNy coatings used on micro drills for machining of printed circuit boards

818

Nanolayer enhancement of biaxially oriented polypropylene film for increased gas barrier

819

Nanolayer treatment to realize suitable configuration for electrochemical allopurinol sensor based on molecular imprinting recognition sites on multiwall carbon nanotube surface

820

Nanolayered chalcogenide glass structures for optical recording

821

Nanolayered Lightweight Flexible Shields With Multidirectional Optical Transparency.

822

Nanolayered multilayer coatings of CrN/CrAlN prepared by reactive DC magnetron sputtering

823

nanolayered ti3c2 modified screen printed electrode as high‐performance electrode for electrochemical detection of tyrosine

824

Nanolayering of phosphoric acid ester monomer on enamel and dentin

825

Nanolayers of selected porphyrin and phthalocyanine dyes on solid substrates studied by electronic absorption and IR reflection–absorption spectroscopy

826

Nano-LC–MS/MS for the quantitation of ceramides in mice cerebrospinal fluid using minimal sample volume

827

Nanoleakage patterns of four dentin bonding systems

828

Nanoleakage, ultramorphological characteristics, and microtensile bond strengths of a new low-shrinkage composite to dentin after artificial aging

829

Nano–level finishing of single crystal silicon blank using magnetorheological finishing process

830

Nano-level monitoring of Yb(III) by fabrication of coated graphite electrode based on newly synthesized hexaaza macrocyclic ligand Original Research Article

831

Nano-level wettings of platinum and palladium on single-walled carbon nanotubes

832

Nano-like magnesium oxide films and its significance in optical fiber humidity sensor

833

Nanolipoparticles-mediated MDR1 siRNA delivery reduces doxorubicin resistance in breast cancer cells and silences MDR1 expression in xenograft model of human breast cancer

834

Nanolipoparticles-mediated MDR1 siRNA delivery: preparation, characterization and cellular uptake

835

Nanolipoparticles-mediated MDR1 siRNA delivery: preparation, characterization and cellular uptake

836

Nanoliposomal formulation of Agrostemma githago aqueous extract shows enhanced cytotoxic effect on gastric cancer cell line

837

Nanoliposomal formulation of Agrostemma githago aqueous extract shows enhanced cytotoxic effect on gastric cancer cell line

838

Nanoliposomal formulation of Ecballium elaterium Extract: Cytotoxic Evaluation against Human Gastric Adenocarcinoma (AGS) Cell Line

839

Nanoliposome Potentials in Nanotherapy: A Concise Overview

840

Nanoliposome-loaded antifungal drugs for dermal administration: A review

841

Nanoliposome-mediated FL/TRAIL double-gene therapy for colon cancer: In vitro and in vivo evaluation

842

Nano-liquid chromatography analysis of dansylated biogenic amines in wines

843

Nano-liquid chromatography coupled with mass spectrometry: Separation of sulfonamides employing non-porous core–shell particles

844

Nano-liquid chromatography in nutraceutical analysis: Determination of polyphenols in bee pollen

845

Nanoliter deposition unit for pipetting droplets of small volumes for Total Reflection X-ray Fluorescence applications

846

Nanoliter deposition unit for pipetting droplets of small volumes for Total Reflection X-ray Fluorescence applications

847

Nanoliter droplet array for microRNA detection based on enzymatic stem-loop probes ligation and SYBR Green real-time PCR

848

Nanolithography and electron holography with ultrasharp field emitters

849

Nanolithography and manipulation of graphene using an atomic force microscope

850

Nanolithography and subnanomolecular interactions for biomimetic sensors

851

Nano-localized desorption and time-of-flight mass analysis using solely optical enhancement in the proximity of a scanning tunneling microscope tip

852

Nanolubricants for diesel engines: Related emissions and compatibility with the after-treatment catalysts

853

Nanolubrication of sliding components in adaptive optics used in microprojectors

854

Nano-lubrication: concept and design

855

Nanomachines: a general approach to inducing a directed motion at the atomic level

856

Nanomachines: A Roadmap for Realizing the Vision

857

Nano-magnetic catalyst KF/CaO–Fe3O4 for biodiesel production

858

Nanomagnetic intergrowths in Fe–Ni meteoritic metal: The potential for time-resolved records of planetesimal dynamo fields

859

Nanomagnetic organic-inorganic hybrid (CuFe2O4@Si-Imid-PMo): an efficient green catalyst for the synthesis of 2,4,5-trisubstituted imidazoles

860

Nano-magnetic particles used in biomedicine: Core and coating materials

861

Nanomagnetic structures at surfaces

862

Nanomagnetically modified sulfuric acid (γ-Fe2O3@SiO2-OSO3H): an efficient, fast, and reusable green catalyst for the Ugi-like Groebke-Blackburn-Bienaymé three-component reaction under solvent-free conditions

863

Nanomagnetism and spin electronics: materials, microstructure and novel properties

864

Nanomagnetism shows in vivo potential

865

Nanomagnetism—nascent or fully formed?

866

Nano-magnetite as an eco-friendly and magnetically separable catalyst for a one-pot synthesis of pyrano [2, 3-c]pyrazoles and bis(4-hydroxycoumarin-3-yl)methane derivatives

867

Nanomagnetite-Fe3O4 as a highly efficient, green and recyclable catalyst for the synthesis of 4,4´-(arylmethylene)-bis(3-methyl-1-phenyl-1H-pyrazol-5-ol)s

868

Nanomagnetosols: magnetism opens up new perspectives for targeted aerosol delivery to the lung

869

Nanomanipulation and fabrication by ion beam molding

870

Nanomanipulation by atomic force microscopy of carbon nanotubes on a nanostructured surface

871

Nanomanipulation in a scanning electron microscope

872

Nanomanipulator-assisted fabrication and characterization of carbon nanotubes inside scanning electron microscope

873

Nanomaterial Assisted Electrochemical Detection of Isolated Piperine: a Phytochemical From Long Pepper

874

Nanomaterial Containing Wall Paints Can Increase Radon Concentration in Houses Located in Radon Prone Areas

875

Nanomaterial labels in electrochemical immunosensors and immunoassays

876

Nanomaterial powders and deposits prepared by flame spray processing of liquid precursors

877

Nano-material processing with laser radiation in the near field of a scanning probe tip

878

Nanomaterial-based Agrochemicals New Avenue for Sustainable Agriculture: A Short Review

879

Nanomaterial-based electrochemical DNA sensing strategies

880

Nanomaterial-based Li-ion battery electrodes

881

Nanomaterial-mediated CNS delivery of diagnostic and therapeutic agents

882

Nanomaterials and Nanotechnology Websites

883

Nanomaterials and supercritical fluids

884

Nanomaterials and Water Purification: Opportunities and Challenges

885

nanomaterials application in air pollution remediation

886

Nanomaterials as Non-viral siRNA Delivery Agents for Cancer Therapy

887

Nanomaterials based on molybdenum diselenide

888

Nanomaterials based upon silylated layered double hydroxides

889

Nanomaterials Chemistry: Recent Developments and New Directions

890

Nanomaterials containing rare-earth ions Tb, Eu, Er and Yb: preparation, optical properties and application potential

891

Nanomaterials for benign indoor environments: Electrochromics for “smart windows”, sensors for air quality, and photo-catalysts for air cleaning

892

Nanomaterials for Cancer Diagnosis

893

Nanomaterials for environmental applications: novel WO3-based gas sensors made by advanced gas deposition

894

Nanomaterials for environmental studies: Classification, reference material issues, and strategies for physico-chemical characterisation Original Research Article

895

Nanomaterials for field electron emission: preparation, characterization and application

896

Nanomaterials for field electron emission: preparation, characterization and application

897

Nanomaterials for hydrogen storage: renewable and clean energy

898

Nanomaterials for in situ cell delivery and tissue regeneration

899

Nanomaterials for lithium ion batteries

900

Nanomaterials for photovoltaic conversion

901

Nanomaterials for solar energy conversion

902

Nanomaterials in soils

903

Nanomaterials in the Environment, Agriculture, and Technology (NEAT)

904

Nanomaterials may call for a reconsideration of the present Japanese chemical regulatory system

905

Nanomaterials separation by an ultrasonic-assisted phase transfer method

906

Nanomaterials: Applications and challenges in the cosmetics sector

907

Nanomaterials: Applications in Regeneration of Damaged Tissues

908

Nanomaterials: Synthesis, properties and applications: Edited by A. S. Edelstein and R. C. Cammarata. IOP, Bristol, UK, 1996, 596 pages, hardback, $280 (£140), ISBN 07-5030-358-1

909

Nano-matrix structure formed by graft-copolymerization of styrene onto natural rubber

910

Nanomechanical AC susceptometry of an individual mesoscopic ferrimagnet

911

Nanomechanical and boundary lubrication properties of titanium carbide and diamond-like carbon nanoperiod multilayer and nanocomposite films

912

Nanomechanical and chemical characterization of incipient in vitro carious lesions in human dental enamel

913

Nanomechanical and chemical characterization of the interface between concrete, glass–ceramic bonding enamel and reinforcing steel

914

Nanomechanical and electrochemical properties of ZrN coated NiTi shape memory alloy

915

Nanomechanical and nanotribological properties of bioactive titanium surfaces prepared by alkali treatment

916

Nanomechanical and nanotribological properties of hydrophobic fluorocarbon dielectric coating on tetraethoxysilane for electrowetting applications

917

Nanomechanical and nanowear properties of Cr3C2 thin films deposited by rf sputtering

918

Nanomechanical and surface frictional characteristics of a copolymer based on benzoyl-1,4-phenylene and 1,3-phenylene

919

Nanomechanical and tribological characterization of the MPC phospholipid polymer photografted onto rough polyethylene implants

920

Nanomechanical behavior of 3D porous metal–ceramic nanocomposite Bi/Bi2O3 films

921

Nano-mechanical behavior of a green ultra-high performance concrete

922

Nano-mechanical behaviour of the 3rd body generated in dry friction—Feedback effect of the 3rd body and influence of the surrounding environment on the tribology of graphite

923

Nanomechanical characteristics of annealed Si/SiGe superlattices

924

Nanomechanical characteristics of BaxSr1−xTiO3 thin films

925

Nanomechanical characteristics of lightweight aggregate concrete containing supplementary cementitious materials exposed to elevated temperature

926

Nanomechanical characteristics of SnO2:F thin films deposited by chemical vapor deposition

927

Nanomechanical characterization of amorphous hydrogenated carbon thin films

928

Nanomechanical characterization of cement-based pastes enriched with SiO2 nanoparticles

929

Nanomechanical characterization of heterogeneous and hierarchical biomaterials and tissues using nanoindentation: The role of finite mixture models

930

Nanomechanical characterization of human hair using nanoindentation and SEM

931

Nanomechanical characterization of human hair using nanoindentation and SEM

932

Nanomechanical characterization of human hair using nanoindentation and SEM

933

Nanomechanical characterization of multilayered thin film structures for digital micromirror devices

934

Nanomechanical characterization of multilayered thin film structures for digital micromirror devices

935

Nanomechanical characterization of multilayered thin film structures for digital micromirror devices

936

Nanomechanical characterization of Sn–Ag–Cu/Cu joints—Part 1: Young’s modulus, hardness and deformation mechanisms as a function of temperature Original Research Article

937

Nanomechanical characterization of Sn–Ag–Cu/Cu joints—Part 2: Nanoindentation creep and its relationship with uniaxial creep as a function of temperature Original Research Article

938

Nano-mechanical characterization of synthetic calcium–silicate–hydrate (C–S–H) with varying CaO/SiO2 mixture ratios

939

Nanomechanical characterization of the hydrogen effect on pulsed plasma nitrided super duplex stainless steel

940

Nanomechanical characterization of thin Ti–Pt–Au multilayers deposited on top of LiNbO3 wafer

941

Nanomechanical characterizations of InGaN thin films

942

Nano-mechanical cutting and opening of single wall carbon nanotubes

943

Nanomechanical insights into the deformation behavior of austenitic alloys with different stacking fault energies and austenitic stability

944

Nanomechanical mapping of soft matter by bimodal force microscopy

945

Nanomechanical mapping of the osteochondral interface with contact resonance force microscopy and nanoindentation

946

Nanomechanical measurements of hair as an example of micro-fibre analysis using atomic force microscopy nanoindentation

947

Nanomechanical measurements of hair as an example of micro-fibre analysis using atomic force microscopy nanoindentation

948

Nanomechanical measurements on glutamine molecularly imprinted nylon films

949

Nanomechanical measurements with AFM in the elastic limit

950

Nanomechanical modeling of the nanostructures and dispersed composites

951

Nanomechanical probing of the septum and surrounding substances on Streptococcus mutans cells and biofilms

952

Nano-mechanical properties and biotribological behaviors of nanosized HA/partially-stabilized zirconia composites

953

Nanomechanical properties and microstructure of ZrO2/Al2O3 plasma sprayed coatings

954

Nano-mechanical properties and nano-tribological behaviors of nitrogen-doped diamond-like carbon (DLC) coatings

955

Nanomechanical properties evaluation of chromium nitride films by nanoindentation and nanowear techniques

956

Nanomechanical properties of bioactive films grown on low energy ion implanted Ti

957

Nanomechanical properties of commercial float glass

958

Nanomechanical properties of dental resin-composites

959

Nanomechanical properties of embedded dendrite phase and its influence on inelastic deformation of Zr55Al10Ni5Cu30 glassy alloy

960

Nanomechanical properties of friction stir welded AA6082-T6 aluminum alloy

961

Nanomechanical properties of functionally graded composite coatings: Electrodeposited nickel dispersions containing silicon micro- and nanoparticles

962

Nanomechanical properties of glass–ceramic films obtained by pressure impregnation of oxide powders on commercial float glass surfaces

963

Nanomechanical properties of graphene on poly(ethylene terephthalate) substrate Original Research Article

964

Nanomechanical properties of hybrid coatings for bone tissue engineering

965

Nanomechanical properties of hydroxyapatite (HAP) with DAB dendrimers (poly-propylene imine) coatings onto titanium surfaces

966

Nanomechanical properties of individual chondrocytes and their developing growth factor-stimulated pericellular matrix

967

Nano-mechanical properties of internally cured kenaf fiber reinforced concrete using nanoindentation

968

Nanomechanical properties of lead iodide (PbI2) layered crystals

969

Nanomechanical properties of lead iodide (PbI2) layered crystals

970

Nanomechanical properties of lead iodide (PbI2) layered crystals

971

Nanomechanical properties of modern and fossil bone

972

Nanomechanical properties of nanostructured titanium prepared by SMAT

973

Nanomechanical properties of NbN films prepared by pulsed laser deposition using nanoindendation

974

Nanomechanical properties of novel intermetallic coatings developed on austenitic stainless steels by siliconisation in liquid phase

975

Nanomechanical properties of poly(lactic-co-glycolic) acid film during degradation

976

Nanomechanical properties of poly(l-lactide) nanofibers after deformation

977

Nanomechanical properties of poly(methyl methacrylate-co-9-anthryl methyl methacrylate)

978

Nanomechanical properties of polymer brushes by colloidal AFM probes

979

Nano-mechanical properties of starch and gluten biopolymers from atomic force microscopy

980

Nanomechanical properties of surface-modified titanium alloys for biomedical applications

981

Nanomechanical properties of surfaces of molecular organic thin films

982

Nanomechanical Properties of Tenascin-X Revealed by Single-Molecule Force Spectroscopy

983

Nanomechanical properties of the stigma of dragonfly Anax parthenope julius Brauer

984

Nanomechanical properties of thick porous silicon layers grown on p- and p+-type bulk crystalline Si

985

Nanomechanical properties of TiC, TiN and TiCN thin films using scanning probe microscopy and nanoindentation

986

Nanomechanical properties of TiCN and TiCN/Ti coatings on Ti prepared by Filtered Arc Deposition

987

Nano-mechanical properties profiles across dentin–enamel junction of human incisor teeth

988

Nanomechanical properties through nanoindentation method of amorphous carbon and carbon nitride films synthesized by shielded arc ion plating

989

Nanomechanical resonators and their applications in biological/chemical detection: Nanomechanics principles

990

Nanomechanical resonators and their applications in biological/chemical detection: Nanomechanics principles

991

Nanomechanical response and creep behavior of electroless deposited copper films under nanoindentation test

992

Nanomechanical response of martensite in Ti-(∼49 at.%) Ni alloy

993

Nanomechanical responses of intermetallic phase at the solder joint interface – Crystal orientation and metallurgical effects

994

Nanomechanical testing of Alumina–Titanium functionally graded thin coatings for orthopaedic applications

995

Nanomechanical testing of circular freestanding polymer films with sub-micron thickness Original Research Article

996

Nanomechanical thermal analysis of the effects of physical aging on glass transitions in PS/PMMA blend and PS-PMMA diblock copolymers

997

Nanomechanical unfolding of α-neurexin: A major component of the synaptic junction

998

Nanomechanics and magnetic structure of orthorhombic Ni–Mn–Ga martensite

999

Nanomechanics and Raman spectroscopy of fibrillin 2 knock-out mouse bones

1000

Nano-mechanics based modeling of lifetime distribution of quasibrittle structures

بازگشت