ليست عنوان مقالات لاتين Polyethylene synthesis using zeolite as support for metallocene catalyst Polymer-based paclitaxel-eluting stents reduce in-stent neointimal tissue proliferation: A serial volumetric intravascular ultrasound analysis from the TAXUS-IV trial Original Research Article

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Polyethylene synthesis using zeolite as support for metallocene catalyst

2

Polyethylene terephthalate (PET) bulk film analysis using C60 +, Au3 +, and Au+ primary ion beams

3

Polyethylene terephthalate membrane as a support for covalent immobilization of uricase and its application in serum urate determination

4

Polyethylene thermal oxidative stabilisation in carbon nanotubes based nanocomposites

5

Polyethylene wear in retrieved reverse total shoulder components

6

Polyethylene wear particle generation in vivo in an alumina medial pivot total knee prosthesis

7

Polyethylene wear particles do not induce inflammation or gelatinase (MMP-2 and MMP-9) activity in fibrous tissue interfaces of loosening total hip arthroplasties

8

Polyethylene welding by pulsed visible laser irradiation

9

Polyethylene with bimodal molecular weight distribution synthesized by 2,6-bis(imino)pyridyl complexes of Fe(II) activated with various activators

10

Polyethylene yielding behaviour: What is behind the correlation between yield stress and crystallinity?

11

Polyethylene/carbon nanotube nano hybrid shish-kebab obtained by solvent evaporation and thin-film crystallization

12

Polyethylene/Clay/Graphite Nanocomposites as Potential Materials for Preparation of Reinforced Conductive Natural Gas Transfer Pipes

13

Polyethylene/octa-(ethyl octadeca-10,13 dienoamide) silsesquioxane blends and the adhesion strength to paperboard

14

Polyethylene/palygorskite nanocomposites: Preparation by in situ polymerization and their characterization

15

Polyethylene/phospholipid polymer alloy as an alternative to poly(vinylchloride)-based materials

16

Polyethylene/starch blends with enhanced oxygen barrier and mechanical properties: Effect of granule morphology damage by solid-state shear pulverization

17

Polyethylene-based radiation grafted anion-exchange membranes for alkaline fuel cells

18

Polyethylene–clay hybrid nanocomposites: in situ polymerization using bifunctional organic modifiers

19

Polyethylene-co-methacrylic acid healing agents for mendable epoxy resins Original Research Article

20

Polyethyleneglycol as scaffold and solvent for reusable Csingle bondC coupling homogeneous Pd catalysts

21

Polyethyleneglycol molecular mass and polydispersivity effect on protein partitioning in aqueous two-phase systems

22

Polyethyleneglycol–pepsin interaction and its relationship with protein partitioning in aqueous two-phase systems

23

Polyethyleneimine (PEI) cross-linked P84 nanofiltration (NF) hollow fiber membranes for Pb2+ removal

24

Polyethyleneimine (PEI) functionalized ceramic monoliths as enzyme carriers: Preparation and performance

25

Polyethyleneimine as a pH sensitive film for potentiometric transducers

26

Polyethyleneimine impregnation on activated carbon: Effects of impregnation amount and molecular number on textural characteristics and metal adsorption capacities

27

Polyethyleneimine modified fluorescent carbon dots and their application in cell labeling

28

Polyethyleneimine patterns obtained by laser-transfer assisted by a Dynamic Release Layer onto Themanox soft substrates for cell adhesion study

29

Polyethyleneimine phosphate and citrate systems act like pseudo polyampholytes as a starting method to isolate pepsin

30

Polyethyleneimine precipitation versus anion exchange chromatography in fractionating recombinant β-glucuronidase from transgenic tobacco extract

31

Polyethyleneimine/poly-(γ-glutamic acid)/poly(lactide-co-glycolide) nanoparticles for loading and releasing antiretroviral drug

32

Polyethyleneimine/sodium dodecyl sulphate adsorbed silica particles and their adsorption properties

33

Polyethyleneimine-capped silver nanoclusters as a fluorescence probe for sensitive detection of hydrogen peroxide and glucose Original Research Article

34

Polyethyleneimine-coated reticulated vitreous carbon electrode with immobilized enzymes as a substrate detector Original Research Article

35

Polyethyleneimine-functionalized poly(methyl methacrylate) colloidal nanoparticles for directly coating natural rubber sheet

36

Polyethyleneimine-induced flocculation and flotation of cyanobacterium Anabaena flos-aquae for gas vesicle production

37

Polyethyleneimine-loaded bimodal porous silica as low-cost and high-capacity sorbent for CO2 capture

38

Polyethyleneimine-mediated gene delivery into human adipose derived stem cells

39

Polyethyleneimine-mediated synthesis of superparamagnetic iron oxide nanoparticles with enhanced sensitivity in T2 magnetic resonance imaging

40

Polyethyleneimine-modified super paramagnetic Fe3O4 nanoparticles: An efficient, reusable and water tolerance nanocatalyst

41

Polyethyleneimine-modified super paramagnetic Fe3O4 nanoparticles: An efficient, reusable and water tolerance nanocatalyst

42

Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical properties

43

Polyethylene–polystyrene grafting reaction: effects of polyethylene molecular weight

44

Polyethylenes produced with zirconocene immobilized on MAO-modified silicas

45

Polyethylenimine attached-poly(3-chloro-2-hydroxypropyl methacrylate-co-ethylene dimethacrylate) monosized-porous microspheres as a new separation medium for polar compounds

46

Polyethylenimine loaded nanoporous carbon with ultra-large pore volume for CO2 capture

47

Polyethylenimine modified biochar adsorbent for hexavalent chromium removal from the aqueous solution

48

Polyethylenimine-immobilized core–shell nanoparticles: Synthesis, characterization, and biocompatibility test

49

Polyethylenimine-modified metal oxides for fabrication of packed capillary columns for capillary electrochromatography and capillary liquid chromatography

50

Polyferric silicate sulphate (PFSiS): Preparation, characterisation and coagulation behaviour Original Research Article

51

Polyflex Expandable Stents in the Treatment of Esophageal Disease: Initial Experience

52

Polyfluorene nanowire active waveguides as sub-wavelength polarized light sources

53

Polyfluorene nanowires with pronounced axial texturing prepared by melt-assisted template wetting

54

Polyfluorenes containing 1.8-naphthalimide dye as endcapping groups

55

Polyfluorinated 2,4-diaryl-2,3-dihydro-1H-1,5-benzodiazepines: Synthesis and new rearrangement into polyfluorodihydrobenzimidazo[1,2-a]quinolines

56

Polyfluorinated arylnitramines

57

Polyfluorinated arylnitrosamines

58

Polyfluorinated chemicals in a spatially and temporally integrated food web in the Western Arctic Original Research Article

59

Polyfluorinated compounds in ambient air from ship- and land-based measurements in northern Germany

60

Polyfluorinated compounds in waste water treatment plant effluents and surface waters along the River Elbe, Germany

61

Polyfluorinated cycloalkoxyphenyl ether systems as dopants for liquid crystal display applications

62

Polyfluorinated derivatives in the tetrathiafulvalene (TTF) series

63

Polyfluorinated dibenzodioxins and dibenzofurans — synthesis, analysis, formation and toxicology

64

Polyfluorinated hexabenzyl hexaazaisowurtzitanes

65

Polyfluorinated mercaptoalcohol as a H-bond modifier of poly(2,3,4,5,6-pentafluorostyrene) (PPFS) enhancing miscibility of hydroxylated-PPFS with various acceptor polymers

66

Polyfluorinated mercury thiolates. 199Hg NMR studies and the crystal structure of [Hg(SC6H4(CF3)-2)2]

67

Polyfluorinated phosphine ligands in the room temperature Suzuki cross-coupling reactions

68

Polyfluorinated versus cationic multidentate halogen-bond donors: A direct comparison

69

Polyfluorinated–zinc(II)phthalocyanine complex immobilized on silica: A novel, highly selective and recyclable inorganic–organic hybrid catalyst for the synthesis of biologically important 1,5-benzodiazepines

70

Polyfluoro- and perfluoroalkoxyenaminones in syntheses of nitrogen containing heterocycles

71

Polyfluoroalkylated 1,3-thiazolines: synthesis from polyfluoro-2,3-epoxyalkanes

72

Polyfluoroalkylated tripyrazolylmethane ligands: Synthesis and complexes

73

Polyfluoroalkylation of 2,6-di-tert-butylphenol by 1,2-dibromotetrafluoroethane activated by sulfur dioxide

74

Polyfluoroalkylation of 2-aminothiazoles

75

Polyfluoroaromatic compounds with a NCClR group—a reactive type of polyfluoroarene

76

Polyfluoroorganotrifluoroborates and -difluoroboranes: interesting materials in fluoroorgano and fluoroorgano-element chemistry

77

Polyfunctional adducts assembled with the help of a one-pot sequence of three AdE reactions as synthetically useful intermediates. The course of the Lewis acid induced transformations of the 4,6-dialkoxy-7-arylthioheptene moiety

78

Polyfunctional film coatings for medical use

79

Polyfunctional low-capacity cation-exchange packing material for the separation of underivatized amino acids

80

Polyfunctional MDI oligomers through dendrimerization

81

Polyfunctionality of DeNOx catalysts in other pollutant abatement

82

Polyfunctionalized macrocycles demonstrate enantioselective and ditopic binding properties

83

Polyfuran conducting polymers: Synthesis, properties, and applications

84

Polyfuran, polythiophene and their blend as novel antioxidants for styrene- butadiene rubber vulcanizates

85

Polyfuran/zeolite LTA composites and adsorption properties

86

Polyfuran: electrosynthesis and electrochemical behaviour

87

Polygala cyparissias oleoresin: Comparing CO2 and classical organic solvent extractions

88

POLYGALACTURONASE (PG) PRODUCTION BY FUNGAL STRAINS USING AGRO-INDUSTRIAL BIOPRODUCT IN SOLID STATE FERMENTATION

89

POLYGALACTURONASE PRODUCED BY BOTRYTIS FABAE AS ELICITOR OF TWO FURANOACETYLENIC PHYTOALEXINS IN VICIA FABA PODS

90

Polygalacturonase Production by Aspergillus Niger Solid State Fermentation on Barley Bran and Sugar Beet Pulp Mixture

91

POLYGALACTURONASE PRODUCTION BY ASPERGILLUS NIGER: EXPRESSION IN ONION SEEDS AND POSSIBLE INVOLVEMENT IN VIRULENCE

92

Polygalacturonase Production by Aspergillus sp. in Air-Lift and Agitated Fermentor

93

Polygalacturonase: Production of pectin depolymerising enzyme from Bacillus licheniformis KIBGE IB-21

94

Polygalacturonase-inhibiting protein activity in cantaloupe fruit as a function of fruit maturation and tissue origin

95

Polygalacturonase-inhibiting proteins in defense against phytopathogenic fungi

96

Polygalacturonic Acid/endo-Polygalacturonase System: A Kinetic Study in Batch Reactors

97

Polygalacturonic acid: Another anti-ulcer polysaccharide from the medicinal plant Maytenus ilicifolia

98

Polygalacturonic acid: Another anti-ulcer polysaccharide from the medicinal plant Maytenus ilicifolia

99

Polygamma functions of negative order

100

POLYGAMY IN DIALOGUE WITH ETHICS: A CASE STUDY OF ISIALA-MBANO LOCAL GOVERNMENT AREA OF IMO STATE, NIGERIA

101

POLYGAMY IN INDONESIAN ISLAMIC FAMILY LAW

102

Polygamy in the Ottoman City of Bursa

103

Polygamy in the Perspective of Law and Islamic Rights, Philosophy, and its Valuable Principles

104

Polygamy, disrupted reproduction, and the state: Malian migrants in Paris, France

105

Poly-generating closed cathode fuel cell with carbon capture

106

Polygeneration microgrids: A viable solution in remote areas for supplying power, potable water and hydrogen as transportation fuel

107

Polygenetic development of the Mormon Mesa, NV petrocalcic horizons: Geomorphic and paleoenvironmental interpretations

108

Polygenetic nature of a rhyolitic dome and implications for hazard assessment: Cerro Pizarro volcano, Mexico

109

Polygenetic Soils of the North-Central Part of the Gangetic Plains: A Micromorphological Approach

110

Polygenetic tonalite-trondhjemite-granodiorite (TTG) magmatism in the Smartville Complex, Northern California with a note on LILE depletion in plagiogranites

111

Polygenetic Vertisols of the Purna Valley of Central India

112

Polygenic influence on plasma homocysteine: association of two prevalent mutations, the 844ins68 of cystathionine β-synthase and A2756G of methionine synthase, with lowered plasma homocysteine levels

113

Polygenic powdery mildew disease resistance in Arabidopsis thaliana: quantitative trait analysis of the accession Warschau-1

114

Polygenic Risk Scores for Subtyping of Schizophrenia

115

Polygenic virulence factors involved in pathogenesis of 1997 Hong Kong H5N1 influenza viruses in mice

116

Polyglucuronic acids: Structures, functions and degrading enzymes

117

Polyglutamate copolymers as a tissue-engineering platform: Polymer scaffold modification through aminolysis of poly(γ-benzyl-l-glutamate-co-2,2,2-γ-trichlorethyl-l-glutamate)

118

Polyglutamine aggregation behavior in vitro supports a recruitment mechanism of cytotoxicity

119

Polyglutamine coding genes in bipolar disorder: lack of association with selected candidate loci

120

Polyglutamine expansion diseases: failing to deliver

121

Polyglutamine is Not All: The Functional Role of the AXH Domain in the Ataxin-1 Protein

122

Polyglutamine-containing aggregates in neuronal intranuclear inclusion disease

123

Polyglycerol-bound phosphotriesterase enzyme model complexes for detection and hydrolysis of phosphorus species in aqueous solution

124

Polyglycerol-derived amphiphiles for single walled carbon nanotube suspension

125

POLYGLYCERYL OLEATE SURFACTANTS AND THE STRATUM CORNEUM LIPID

126

Polyglycine Modification of Glassy Carbon Electrode as a Sensor for Effective Sensing of Pyrazole Derivative and its Analytical Applications

127

Polygon Dissections and Euler, Fuss, Kirkman, and Cayley Numbers

128

Polygon dissections and some generalizations of cluster complexes

129

Polygon Dissections and Standard Young Tableaux

130

Polygon Graph Recognition

131

Polygon intersections in spherical topology: application to plate tectonics

132

Polygon pattern geomorphometry on Svalbard (Norway) and western Utopia Planitia (Mars) using high-resolution stereo remote-sensing data

133

Polygon plate-cutting with a given order

134

Polygon plate-cutting with a given order

135

Polygon scheduling Original Research Article

136

Polygon subdivision for pocket machining process planning q

137

Polygon vertex extremality and decomposition of polygons

138

Polygonal Tiling of Some Surfaces Containing Fullerene molecules

139

Polygonal and Polyhedral Contour Reconstruction in Computed Tomography

140

Polygonal approximation of closed discrete curves

141

Polygonal approximation of digital curves based on the principles of perceptual organization

142

Polygonal approximation of digital planar curves through break point suppression

143

Polygonal approximation of digital planar curves through vertex betweenness

144

Polygonal approximation of flows

145

Polygonal approximation using genetic algorithms

146

Polygonal approximation using genetic algorithms

147

Polygonal billiards: Correspondence between classical trajectories and quantum eigenstates

148

Polygonal broadcast, secret maturity, and the firing sensors

149

Polygonal chains with minimal energy

150

Polygonal cracking in coarse clastics records cold temperatures in the equatorial Fountain Formation (Pennsylvanian–Permian, Colorado)

151

Polygonal cracks in bedrock on Earth and Mars: Implications for weathering

152

POLYGONAL DESIGNS WITH BLOCK SIZE 3 AND SINGLE DISTANCE

153

Polygonal designs: some existence and non-existence results

154

Polygonal equalities and virtual degeneracy in -spaces

155

Polygonal fault systems and channel boudinage: 3D analysis of multidirectional extension in analogue sandbox experiments

156

Polygonal faulting and seal integrity in the Bonaparte Basin, Australia

157

Polygonal figures and their form spaces I. The structure of isodiastemic manifolds (manifolds of equilateral polygons)

158

Polygonal figures and their form spaces II. Angle permutations in equilateral polygons

159

Polygonal finite element method for nonlinear constitutive modeling of polycrystalline ferroelectrics

160

Polygonal finite element methods for contact-impact problems on non-conformal meshes

161

Polygonal gold nanoplates in a polymer matrix

162

Polygonal Model Fitting

163

Polygonal planforms and phyllotaxis on plants

164

Polygonal representation of digital planar curves through dominant point detection—a nonparametric algorithm

165

Polygonal ribbons in two and three dimensions

166

Polygonal shape description for recognition of partially occluded objects

167

Polygonal terrains on Mars: A contribution to their geometric and topological characterization

168

Polygonal tubular linear permanent magnet generator analysis and experimental test

169

Polygonal valuations

170

Polygonally Meshed Dipole Model Simulation of the Electrical Field Produced by the Stomach and Intestines

171

Polygonatum cyrtonema lectin induces apoptosis and autophagy in human melanoma A375 cells through a mitochondria-mediated ROS–p38–p53 pathway

172

Polygon-based aggregation of remotely sensed data for regional ecological analyses

173

Polygon-based contact resolution for superquadrics

174

Polygonization of vapor-grown carbon fibers

175

Polygons of differential equations for finding exact solutions

176

Polygons vs. clumps of discs: A numerical study of the influence of grain shape on the mechanical behaviour of granular materials

177

Polygons with inscribed circles and prescribed side lengths

178

Polygon-wise constant curvature natural element approximation of Kirchhoff plate model

179

Polygraph Arrangements

180

Polygraphic sleep criteria as predictors of successful aging: an exploratory longitudinal study

181

Polygraphic sleep measures differentiate alcoholics and stimulant abusers during short-term abstinence

182

Polygynandrous and repeated mounting behaviour in European badgers, Meles meles

183

Polygynandry and even-sexed dispersal in a population of collared pikas, Ochotona collaris

184

Polygynous male starlings allocate parental effort according to relative hatching date

185

Polygyny and deception in the pied flycatcher: can females determine male mating status?

186

Polygyny and female aggression in the pied flycatcher: a comment on Rätti et al.

187

Polygyny and female breeding failure reduce effective population size in the lekking Gunnison sage-grouse Original Research Article

188

Polygyny and female reproductive success in golden lion tamarins, Leontopithecus rosalia

189

Polygyny and sexual selection in red-winged blackbirds : by W.A. Searcy and K. Yasukama Princeton University Press, Monographs in Behavior and Ecology, 1995. $55.00/£45.00 hbk, $29.95/£24.00 pbk (xviii + 312 pages) ISBN 0 691 03686 1

190

Polygyny in the blue tit: intra- and inter-sexual conflicts

191

Polygyny in the blue tit: unbalanced sex ratio and female aggression restrict mate choice

192

Polygyny in the dusky warbler, Phylloscopus fuscatus: the importance of female qualities

193

Polygyny, maternal HIV status and child survival: Rakai, Uganda

194

Polyhalite microfabrics in an Alpine evaporite mélange: Hallstatt, Eastern Alps

195

Polyhalogenated dibenzo-p-dioxins and dibenzofurans in the exhaust air during textile processings

196

Polyhalogenated heterocyclic compounds: Part 45. Reactions of perfluoro-(4-isopropylpyridine) with oxygen, nitrogen and carbon nucleophiles

197

Polyhalogenated heterocyclic compounds: Part 46. Multifunctional heterocycles from bromofluoropyridine derivatives

198

Polyhalogenated heterocyclic compounds: Part 52. [1] Macrocycles from 3,5-dichloro-2,4,6-trifluoropyridine

199

Polyhalogenoheterocyclic compounds: Part 51. [1] Macrocycles from 4-alkoxy-tetrafluoropyridine derivatives

200

Polyhalogenoheterocyclic compounds: Part 54: [1] Suzuki reactions of 2,4,6-tribromo-3,5-difluoropyridine

201

Polyharmonic (thin-plate) splines in the analysis of composite plates

202

Polyharmonic (thin-plate) splines in the analysis of composite plates

203

Polyharmonic (thin-plate) splines in the analysis of composite plates

204

Polyhedra as domains of harmonic maps

205

Polyhedra associated with identifying codes

206

Polyhedra dominating finitely many different homotopy types

207

Polyhedra of Small Order and Their Hamiltonian Properties

208

Polyhedra with submodular support functions and their unbalanced simultaneous exchangeability Original Research Article

209

Polyhedral analysis and decompositions for capacitated plant location-type problems Original Research Article

210

Polyhedral analysis for the two-item uncapacitated lot-sizing problem with one-way substitution Original Research Article

211

Polyhedral andLagrangianapproachesforlotsizingwithproductiontimewindows and setuptimes

212

Polyhedral antimony(III) and bismuth(III) siloxanes: Synthesis, spectral studies, and structural characterization of [Sb(O3SiR)]4 and [Bi12(O3SiR)8(μ3-O)4Cl4(THF)8] (R = (2,6-iPr2C6H3)N(SiMe3))

213

Polyhedral approximation and practical convex hull algorithm for certain classes of voxel sets Original Research Article

214

Polyhedral approximations of strictly convex compacta

215

Polyhedral azadicarbaborane chemistry. The ‘converse’ synthesis of a small family of 6,9-(NHR)-bridged-arachno-5,10-dicarbadecaboranes

216

Polyhedral carbon nanofoams with minimum surface area partitions produced using silica nanofoams as templates Original Research Article

217

Polyhedral characterizations and perfection of line graphs Original Research Article

218

Polyhedral combinatorics of multi-index axial transportation problems

219

Polyhedral conditions for the nonexistence of the MLE for hierarchical log-linear models

220

Polyhedral cones and monomial blowing-ups

221

Polyhedral Contact Formation Identification for Autonomous Compliant Motion: Exact Nonlinear Bayesian Filtering.

222

Polyhedral contact formation modeling and identification for autonomous compliant motion

223

Polyhedral dicarbaborane chemistry: a convenient synthesis of the [nido-7,8-C2B9H12]− ‘dicarbollide’ anion via the Brellochs reaction

224

Polyhedral direct sums of Banach spaces, and generalized centers of finite sets

225

Polyhedral Embeddings of Cayley Graphs

226

Polyhedral fundamental domains for discrete subgroups of PSL (2, R)

227

Polyhedral graph abstractions and an approach to the Linear Hirsch Conjecture

228

Polyhedral graphs with extreme numbers of types of faces Original Research Article

229

Polyhedral graphs with restricted number of faces of the same type Original Research Article

230

Polyhedral graphs without hamiltonian cycles Original Research Article

231

Polyhedral iridaborane chemistry: Elements of the 10-vertex closo–isonido–isocloso continuum: Molecular structures of [(PPh3)2HIrB9H9(PPh3)], [(PPh3)(Ph2PC6H4)IrB9H7(PPh3)], [(PPh3)(Ph2PC6H4)HIrB9H6Cl(PPh3)], [(PPh3)(Ph2PC6H4)HIrB9H6(PPh3)2] and [(PPh3)(P

232

Polyhedral metallathiaborane chemistry: Synthesis and characterisation of metallathiaboranes based on the twelve-vertex icosahedral closo-{MSB10H10} unit, where M is Rh or Ir

233

Polyhedral methods for piecewise-linear functions I: the lambda method Original Research Article

234

Polyhedral model for self-similar grain growth Original Research Article

235

Polyhedral monadicity of n-groupoids and standardized adjunction Original Research Article

236

Polyhedral monocarbaborane chemistry. Routes to neutral, monoanionic and dianionic carbo-carbaborane rods

237

Polyhedral monocarbaborane chemistry: positional isomerism within the 10-vertex monocarbaborane cluster: synthesis and characterisation of the [2-Ph-closo-2-CB9H9]− anion

238

Polyhedral monocarbaborane chemistry: Reactions of the [6-Ph-nido-6-CB9H11]− anion with two-electron donors to yield a series of neutral arachno and closo ten-vertex monocarbaborane derivatives

239

Polyhedral monocarbaborane chemistry: The C,B-para-diphenyl monocarbadodecaborane anion [1,12-Ph2-closo-1-CB11H10]−

240

Polyhedral monocarbaborane chemistry: The closo-[PhCB7H7]− and closo-[PhCB10H10]− anions: the two missing species in the closo-[PhCBnHn]− sequence

241

Polyhedral norms on non-separable Banach spaces

242

Polyhedral object recognition by indexing

243

Polyhedral oligomeric silsequioxane–polyurethane nanocomposite microvessels for an artificial capillary bed

244

Polyhedral Oligomeric Silsesquioxane (POSS) Based Resists: Material Design Challenges and Lithographic Evaluation at 157 nm

245

Polyhedral oligomeric silsesquioxane and polyethylene nanocomposites and their physical characteristics

246

Polyhedral oligomeric silsesquioxane as a novel plasticizer for poly(vinyl chloride)

247

Polyhedral oligomeric silsesquioxane trisilanols as pigment surface modifiers for fluoropolymer based Thickness Sensitive Spectrally Selective (TSSS) paint coatings

248

Polyhedral oligomeric silsesquioxanes (POSS) thermal degradation

249

Polyhedral oligomeric silsesquioxanes as functional monomer to prepare hybrid monolithic columns for capillary electrochromatography and capillary liquid chromatography Original Research Article

250

Polyhedral oligosilsesquioxanes POSS/—building blocks for the development of nano-structured materials

251

Polyhedral perturbations that preserve topological form Original Research Article

252

Polyhedral Realizations of Crystal Bases for Integrable Highest Weight Modules

253

Polyhedral Realizations of Crystal Bases for Quantized Kac–Moody Algebras

254

Polyhedral regions of local stability for linear discrete-time systems with saturating controls

255

Polyhedral Representation and Adjacency Graph in n-dimensional Digital Images

256

Polyhedral Representation and Adjacency Graph in n-dimensional Digital Images

257

Polyhedral representation of discrete Morse functions

258

Polyhedral results and exact algorithms for the asymmetric travelling salesman problem with replenishment arcs Original Research Article

259

Polyhedral results for the bipartite induced subgraph problem Original Research Article

260

Polyhedral results for the Equitable Coloring Problem

261

Polyhedral ruthenaborane chemistry. Approaches to encapsulated boron cores. The isolation and characterisation of the partially encapsulated isocloso 10-vertex {RuB9} cluster compound [(PPh3)RuB9H9{RuCl2(PPh3)2}2]

262

Polyhedral structure of submodular and posi-modular systems Original Research Article

263

Polyhedral studies on the convex recoloring problem

264

Polyhedral Surface Modeling with a Diffusion System

265

Polyhedral truncations as eutactic transformations

266

Polyhedral vertex blending with setbacks using rational S-patches Original Research Article

267

Polyhedral yield surfaces in the element nodal force space

268

Polyhedral-based nonlinear optical materials.: Part 1. Theoretical investigation of some new high nonlinear optical response compounds involving carboranes and charged aromatic donors and acceptors

269

Polyhedrality of the Brookes–Groves invariant for the non-commutative torus

270

Polyhedrization of an arbitrary 3D point set Original Research Article

271

PolyHeme and the Ethics of Informed Consent

272

Polyherbal extract improves glycometabolic control in alloxan-induced diabetic rats via down-regulating the MAPK/JNK pathway, modulating Nrf-2/Keap-1 expression, and stimulating insulin signaling

273

Polyheterocycles containing alkene spacer linkages Part II. Synthesis and polymerization of (E)-2-styrylthiophenes and (E)-2-styrylpyrrole

274

Polyhexamethyleneguanidine phosphate induces severe lung inflammation, fibrosis, and thymic atrophy

275

Polyhexes that are graphs

276

PolyHIPE foams: Production, characterisation, and performance as aerosol filtration materials

277

PolyHIPE: IPNs, hybrids, nanoscale porosity, silica monoliths and ICP-based sensors

278

PolyHIPEs from Methyl methacrylate: Hierarchically structured microcellular polymers with exceptional mechanical properties

279

Polyhistidine–PEG:DNA nanocomposites for gene delivery

280

Polyhydramnios as a Predictor of Adverse Pregnancy Outcomes

281

Polyhydramnios. Risk factors and outcome

282

Polyhydrazides based on 2,5-bis(4-carboxymethylene phenyl)-3,4-diphenyl thiophene

283

Polyhydrazides based upon aromatic dihydrazines

284

Polyhydride complexes of rhenium with the chelating ligand 1,2-bis(diphenylphosphinite)ethane

285

Polyhydroalkanoates (PHAs) Production from Saponified Sunflower Oil in Mixed Cultures under Aerobic Condition

286

Polyhydrogenation of [60]- and [70]fullerenes with Zn/HCl and Zn/DCl

287

Polyhydroxy alkaloids: chromatographic analysis

288

Polyhydroxy Amino Acid Derivatives via β-Lactams Using Enantiospecific Approaches and Microwave Techniques

289

Polyhydroxy pregnanes from Dregea volubilis

290

Polyhydroxyacrylate–polyurethane semi-interpenetrating polymer networks

291

Polyhydroxyalkaloids in the Aroid Tribes Nephthytideae and Aglaonemateae: Phytochemical Support for an Intertribal relationship

292

Polyhydroxyalkanoate (PHA) scaffolds with good mechanical properties and biocompatibility

293

Polyhydroxyalkanoate degrading hydrolase-like activities by Pseudomonas sp. isolated from soil

294

Polyhydroxyalkanoate Polymers and Their Production in Transgenic Plants

295

Polyhydroxyalkanoate production as a side stream process on a municipal waste water treatment plant

296

Polyhydroxyalkanoate production from fermented volatile fatty acids: Effect of pH and feeding regimes

297

Polyhydroxyalkanoate production from whey by Pseudomonas hydrogenovora

298

Polyhydroxyalkanoates accumulation by Methylobacterium organophilum CZ-2 during methane degradation using citrate or propionate as cosubstrates

299

Polyhydroxyalkanoates form potentially a key aspect of aerobic phosphorus uptake in enhanced biological phosphorus removal

300

Polyhydroxyalkanoates production by a mixed photosynthetic consortium of bacteria and algae

301

Polyhydroxyalkanoates production by engineered Cupriavidus necator from waste material containing lactose

302

Polyhydroxyalkanoates: an overview

303

Polyhydroxyalkanoic Acids and Rhamnolipids Are Synthesized Sequentially in Hexadecane Fermentation by Pseudomonas aeruginosa ATCC 10145

304

Polyhydroxyalkanonate derivatives in current clinical applications and trials

305

Polyhydroxybutyrate for Improved Oil Recovery: A Literature Review

306

Polyhydroxybutyrate production by direct use of waste activated sludge in phosphorus-limited fed-batch culture

307

Polyhydroxybutyrate production from a novel feedstock derived from a wheat-based biorefinery

308

Polyhydroxybutyrate production from oil palm empty fruit bunch using Bacillus megaterium R11

309

Polyhydroxybutyrate synthesis on biodiesel wastewater using mixed microbial consortia

310

Polyhydroxybutyrate-b-polyethyleneglycol block copolymer for the solid phase extraction of lead and copper in water, baby foods, tea and coffee samples

311

Polyhydroxyethylmethacrylate-based magnetic DNA-affinity beads for anti-DNA antibody removal from systemic lupus erythematosus patient plasma

312

Polyhydroxylated 3-(N-phenyl) carbamoyl-2-iminochromene derivatives as potent inhibitors of tyrosine kinase p60c-src

313

Polyhydroxylated 4-thiaflavans as multipotent antioxidants: Protective effect on oxidative DNA damage in vitro

314

Polyhydroxylated azepanes as new motifs for DNA minor groove binding agents

315

Polyhydroxylated aziridinylcyclopentanes as glycomimetics: a new competitive inhibitor of α-mannosidase

316

Polyhydroxylated Bicyclic Ureas from Glycosyl Isocyanides

317

Polyhydroxylated indolizidine alkaloids—an efficient synthesis of 1-deoxy-8,8a-di-epi-castanospermine

318

Polyhydroxylated indolizidine alkaloids—synthesis of dideoxycastanospermine

319

Polyhydroxylated macrolide isolated from the endophytic fungus Pestalotiopsis mangiferae

320

Polyhydroxylated pyrrolidine and pyrrolizidine alkaloids from Hyacinthoides non-scripta and Scilla campanulata

321

Polyhydroxylated pyrrolidines, III. Synthesis of new protected 2,5-dideoxy-2,5-iminohexitols from d-fructose

322

Polyhydroxylated pyrrolidines: synthesis from d-fructose of new tri-orthogonally protected 2,5-dideoxy-2,5-iminohexitols

323

Polyhydroxylated pyrrolizidines. Part 6: A new and concise stereoselective synthesis of (+)-casuarine and its 6,7-diepi isomer, from DMDP

324

Polyhydroxylated steroids from the octocoral Isis hippuris

325

Polyhydroxyl-based surfactants and their physico-chemical properties and applications

326

POLYHYDROYALKANOATES: FROM BASIC RESEARCH AND MOLECULAR BIOLOGY TO APPLICATION

327

PolyI:C Upregulated CCR5 and Promoted THP-1-Derived Macrophage Chemotaxis via TLR3/JMJD1A Signalling

328

Polyimide (PI) films by chemical vapor deposition (CVD): Novel design, experiments and characterization

329

Polyimide and polyhedral oligomeric silsesquioxane nanocomposites for low-dielectric applications

330

Polyimide based neural implants with stiffness improvement

331

Polyimide blend alignment layers for control of liquid crystal pretilt angle through baking

332

Polyimide foams from powder: Experimental analysis of competitive diffusion phenomena

333

Polyimide foils as backing supports for optical filters

334

Polyimide foils as backing supports for optical filters

335

Polyimide hollow fiber gas separation membranes: preparation and the suppression of plasticization in propane/propylene environments

336

Polyimide modification by a linear aliphatic diamine to enhance transport performance and plasticization resistance

337

Polyimide nano-coating on carbon fibers by electrophoretic deposition

338

Polyimide nanocomposites prepared from high-temperature, reduced charge organoclays

339

Polyimide surface modification by linear stationary plasma thruster

340

Polyimide/montmorillonite nanocomposites based on thermally stable, rigid-rod aromatic amine modifiers

341

Polyimide/montmorillonite nanocomposites with photolithographic properties

342

Polyimide/POSS nanocomposites: interfacial interaction, thermal properties and mechanical properties

343

Polyimide/sepiolite nanocomposite films: Preparation, morphology and properties

344

Polyimide/silica hybrid-clay nanocomposites

345

Polyimide/Ta2O5 nanocomposite gate insulators for enhanced organic thin-film transistor performance

346

Polyimide–polydimethylsiloxane copolymers containing nitrile groups

347

Polyimides based on poly(2-furanmethanol-formaldehyde)

348

Polyimides containing s-triazine ring

349

Polyimides from 1,5-bis(4-amino-2-trifluoromethylphenoxy)naphthalene and aromatic tetracarboxylic dianhydrides

350

Polyimides from 2,3,3′,4′-biphenyltetracarboxylic dianhydride and aromatic diamines

351

Polyimides with main-chain ethylene oxide units: synthesis and properties

352

Polyimides with main-chain photosensitive groups: Synthesis, characterization and their properties as liquid crystal alignment layers

353

Polyimide–silica hybrids containing novel phenylethynyl imide silanes as coupling agents for surface-treated titanium alloy

354

Polyimide–silica hybrids containing novel phenylethynyl imide silanes as coupling agents for surface-treated titanium alloy

355

Polyimide-silica nanocomposites with inter-phase bonding through γ-glycidyloxy-propyltrimethoxysilane

356

Polyimide-silica nanocomposites: spectroscopic, morphological and mechanical investigations

357

Polyimido sulphur anions S(NR) - mn: Free radicals and coordination behaviour

358

Polyindole and poly(5-cyanoindole) : electrochemical and FT-IR spectroscopic comparative studies

359

Polyindole/ carboxylated-multiwall carbon nanotube composites produced by in-situ and interfacial polymerization

360

Polyinosinic–polycytidylic acid attenuates hepatic fibrosis in C57BL/6 mice with Schistosoma japonicum infection

361

Polyion Complex Chitosan Membrane Consisting of Sodium Alginate/Chitosan for the Pervaporation Separation of Methanol/Methyl tert-butyl Ether Mixtures

362

Polyion complex micelles from plasmid DNA and poly(ethylene glycol)–poly( -lysine) block copolymer as serum-tolerable polyplex system: physicochemical properties of micelles relevant to gene transfection efficiency

363

Polyion complex stabilized palladium nanoparticles for Suzuki and Heck reaction in water

364

Polyion monolayers and halos around large weakly-charged colloids

365

Polyion–counterion interaction behavior for sodium carboxymethylcellulose in methanol–water mixed solvent media

366

Polyion–counterion interactions in sodium carboxymethylcellulose–ethylene glycol–water ternary solutions

367

Polyions act as an electrostatic glue for mesoscopic particle aggregates

368

Polyion-sensitive membrane-based electrodes for heparin-binding foldamer analysis Original Research Article

369

Polyisobutene/polycyclohexyl methacrylate interpenetrating polymer networks

370

Polyisobutene/polystyrene interpenetrating polymer networks: Effects of network formation order and composition on the IPN architecture

371

Polyisobutene–poly(methylmethacrylate) interpenetrating polymer networks: synthesis and characterization

372

Polyisobutenylsuccinimides as detergents and dispersants in fuel: infrared spectroscopy application

373

Polyisobutylene supports—a non-polar hydrocarbon analog of PEG supports

374

Polyisobutylene-based miktoarm star polymers via a combination of carbocationic and atom transfer radical polymerizations

375

Polyisobutylene-based thermoplastic polyurethanes exhibit significant phase mixing

376

Polyisobutylene-supported N-heterocyclic carbene palladium catalysts

377

Polyisoprene and high structure carbon nanoparticle composite for sensing organic solvent vapours

378

Polyisoprene and high structure carbon nanoparticle composite for sensing organic solvent vapours

379

Polyisoprene—multi-wall carbon nanotube composites for sensing strain

380

Polyisoprenoyl gemcitabine conjugates self assemble as nanoparticles, useful for cancer therapy

381

Polyisoprenylated acylphloroglucinols and a polyisoprenylated tetracyclic xanthone from the bark of Calophyllum thorelii

382

Polyisoprenylated benzophenone derivatives from Clusia obdeltifolia

383

Polyisoprenylated benzophenone derivatives from the fruits of Garcinia cambogia and their absolute configuration by quantum chemical circular dichroism calculations

384

Polyketide derivatives of endophytic fungus Pestalotiopsis sp. isolated from the Chinese mangrove plant Rhizophora mucronata

385

Polyketide origin of 3-alkylpyridines in the marine mollusc Haminoea orbignyana

386

Polyketide origin of pheromones of Carpophilus davidsoni and C. mutilatus (Coleoptera: Nitidulidae) Original Research Article

387

Polyketide Proofreading by an Acyltransferase-like Enzyme Original Research Article

388

Polyketide synthase acyl carrier protein (ACP) as a substrate and a catalyst for malonyl ACP biosynthesis Original Research Article

389

Polyketide synthesis in vitro on a modular polyketide synthase Original Research Article

390

Polyketide β-Branching in Bryostatin Biosynthesis: Identification of Surrogate Acetyl-ACP Donors for BryR, an HMG-ACP Synthase Original Research Article

391

Polyketides from the mangrove-derived endophytic fungus Acremonium strictum

392

Polyketides produced by Daldinia loculata cultured from Northern Manitoba

393

Polykis(pyrazol-1-yl)benzenes: preparation, structure, and complexation with copper and palladium

394

Polylactic Acid /High-Ratio Natural Kenaf Fiber Biocomposite Sheets Processed by Calendering Melt Mixing Technique

395

Polylactic acid fibre-reinforced polycaprolactone scaffolds for bone tissue engineering

396

Poly-lactic Acid/Gelatin Nanofiber (PLA/GTNF) Conduits Containing Platelet-Rich Plasma for Peripheral Nerve Regeneration

397

Polylactide (PLA)/layered double hydroxides composite fibers by electrospinning method Original Research Article

398

Polylactide (PLA)–CaSO4 composites toughened with low molecular weight and polymeric ester-like plasticizers and related performances

399

Polylactide (PLA)-clay nanocomposites prepared by melt compounding in the presence of a chain extender

400

Polylactide and carbon nanotubes/smectite-clay nanocomposites: Preparation, characterization, sorptive and electrical properties

401

Polylactide compositions. Part 1: Effect of filler content and size on mechanical properties of PLA/calcium sulfate composites

402

Polylactide microspheres prepared by premix membrane emulsification—Effects of solvent removal rate

403

Polylactide/montmorillonite nanocomposites: Structure, dielectric, viscoelastic and thermal properties

404

Polylactide/polyglycolide copolymer in bone defect healing in humans

405

Polylactide-based polyurethane and its shape-memory behavior

406

Polylactide-based renewable composites from natural products residues by encapsulated film bag: Characterization and biodegradability

407

Polylactide-based thermoplastic shape memory polymer nanocomposites

408

Polylactones 54: ring-opening and ring-expansion polymerizations of ϵ-caprolactone initiated by germanium alkoxides

409

Polylactosamine synthesis and branch formation of N-glycans in β1,4-galactosyltransferase-1-deficient mice

410

Polyline averaging using distance surfaces: A spatial hurricane climatology

411

Polylinear Additive Functionals of Superprocesses

412

Polylinked adamantanoid structure of Cd(SePh)2

413

Polylithiation of thioethers: a versatile route for polyanionic synthons

414

Polylithiumorganic Compounds. Part 27: C,C-Bond Forming Reactions of 3,4-Dilithio-2,5-dimethyl-2,4-hexadiene

415

Polylithiumorganic compounds. Part 29: C,C Bond cleavage of phenyl substituted and strained carbocycles using lithium metal

416

Polylithiumorganic compounds: Part 28. The reaction of allene and alkyl substituted allenes with lithium metal

417

Poly-L-lactic acid for the aesthetic correction of facial volume loss

418

Poly-l-lysine-coated albumin nanoparticles: Stability, mechanism for increasing in vitro enzymatic resilience, and siRNA release characteristics

419

Poly-l-lysine-modified reduced graphene oxide stabilizes the copper nanoparticles with higher water-solubility and long-term additively antibacterial activity

420

Poly-l-lysines and poly-l-arginines induce leakage of negatively charged phospholipid vesicles and translocate through the lipid bilayer upon electrostatic binding to the membrane Original Research Article

421

Polylog Depth Circuits for Integer Factoring and Discrete Logarithms

422

Polylysine-functionalised thermoresponsive chitosan hydrogel for neural tissue engineering

423

Polylysine–porphycene conjugates as efficient photosensitizers for the inactivation of microbial pathogens

424

PolyMAX, a Mobile WiMAX module for the ns-2 simulator with QoS and AMC support

425

Polymelamine modified edge plane pyrolytic graphite sensor for the electrochemical assay of serotonin

426

Polymelia with unhealed navel in an Iranian indigenous young fowl

427

Poly-membered macrometallacyclic complexes of silver and gold with functionalized N-Heterocyclic carbene and functionalized 2-borabicyclo[1.1.0]but-1(3)-ene ligands: A DFT study

428

Polymer (fiber)-supported palladium catalyst containing imidazolinyl rings and its application to the Heck reaction

429

Polymer 1960–2009

430

Polymer ablation: From fundamentals of polymer design to laser plasma thruster

431

Polymer action on alkali–silica reaction in cement mortar

432

Polymer activation by reducing agent absorption as a flexible tool for the creation of metal films and nanostructures by electroless plating

433

Polymer additive analysis by pyrolysis–gas chromatography: I. Plasticizers

434

Polymer additive analysis by pyrolysis–gas chromatography: II. Flame retardants

435

Polymer additive analysis by pyrolysis–gas chromatography: III. Lubricants

436

Polymer additive analysis by pyrolysis–gas chromatography: IV. Antioxidants

437

Polymer adsorption at the brine/rock interface: the role of electrostatic interactions and wettability

438

Polymer adsorption in the grafting reactions of hydroxyl terminal polymers with multi-walled carbon nanotubes

439

Polymer adsorption on the surface of highly dispersed silica

440

Polymer adsorption: its correlation with flocculation and dewatering of kaolin suspension in the presence and absence of surfactants

441

POLYMER ADSORPTION–DRIVEN SELF-ASSEMBLY OF NANOSTRUCTURES

442

Polymer and ampicillin co-precipitation by supercritical antisolvent process

443

Polymer- and carbon-based electrodes for polymer solar cells: Toward low-cost, continuous fabrication over large area

444

Polymer- and colloid-mediated bioassays, sensors and diagnostics

445

Polymer and composite foam for hydrogen storage application

446

Polymer and Fock representations for a scalar field

447

Polymer and organic solar cells viewed as thin film technologies: What it will take for them to become a success outside academia

448

Polymer and particle adsorption at the PDMS droplet-water interface

449

Polymer and salt selection for lithium polymer batteries

450

Polymer and small molecule multi-layer light-emitting diodes

451

Polymer anion-selective membrane for electrolytic water splitting: The impact of a liquid electrolyte composition on the process parameters and long-term stability

452

Polymer architecture influence on rheology

453

Polymer as an important component of blends and composites with liquid crystals

454

Polymer assemblies for controlled delivery of bioactive molecules from surfaces

455

Polymer assisted assembling of the semiconductor particles: Structural and electrical studies

456

Polymer assisted isolation of hydroxyapatite from Thunnus obesus bone

457

Polymer atomization of iron aluminide

458

Polymer atomization of iron aluminide

459

Polymer band alignment at the interface with indium tin oxide: consequences for light emitting devices

460

Polymer based blue electrophosphorescent light emitting devices

461

Polymer Based Formulation and Immobilization Approaches in Enzymatic Detoxification of Organophosphorus Compounds: A review

462

Polymer based interfaces as bioinspired ‘smart skins’

463

Polymer based materials for solid electrolyte sensors

464

Polymer based Membrane Electrospun Fiber in Fuel Cell Application: A Short Review

465

Polymer based polarization insensitive amplitude modulator: conception, technology and demonstration

466

Polymer batteries fabricated from lithium complexed acetylated chitosan

467

Polymer batteries with chitosan electrolyte mixed with sodium perchlorate

468

Polymer batteries with chitosan electrolyte mixed with sodium perchlorate

469

Polymer biodegradation: Mechanisms and estimation techniques – A review Review Article

470

Polymer biomaterials in solution, as interfaces and as solids : S.L. Cooper, C.H. Bamford and T. Tsuruta, editors VSP Publishers, Utrecht, The Netherlands, 1995, pp. 1134

471

Polymer blend emulsion stabilization using carbon nanotubes interfacial confinement

472

Polymer blend latex films: Miscibility and polymer diffusion studied by energy transfer

473

Polymer blend membranes of sulfonated poly(arylene ether ketone) for direct methanol fuel cell

474

Polymer blend/organoclay nanocomposite with poly(ethylene oxide) and poly(methyl methacrylate)

475

Polymer blends and composites from renewable resources

476

Polymer blends and interpenetrating polymer networks at the interface with solids

477

Polymer blends based on copolymers bearing both side and main chain pyridine units as proton exchange membranes for high temperature fuel cells

478

Polymer blends based on PEO and starch: Miscibility and spherulite growth rate evaluated through DSC and optical microscopy

479

Polymer blends based on sulfonated poly(ether ketone ketone) and poly(ether sulfone) as proton exchange membranes for fuel cells

480

Polymer blends based on the β-modification of polypropylene

481

Polymer blends of SPEEK for DMFC application at intermediate temperatures

482

Polymer blends of sPS/PA6 compatibilized by sulfonated syndiotactic polystyrene

483

Polymer blends; stretching what we can learn through the combination of experiment and theory

484

Polymer Bonded Anisotropic Thick Hard Films for Micromotors/Microgenerators Original Research Article

485

Polymer bound iminodicarbonate: a new ammonia equivalent for solid-phase synthesis of primary amines

486

Polymer bound iminodicarbonate: a new ammonia equivalent for solid-phase synthesis of primary amines

487

Polymer bound iminodicarbonate: a new ammonia equivalent for solid-phase synthesis of primary amines

488

Polymer bristles: a SANS study

489

Polymer bromide-DMSO: novel reagent system for the oxidation of alcohols to carbonyl compounds

490

Polymer brush coatings regulating cell behavior: Passive interfaces turn into active

491

Polymer brush with pendent glucosylurea groups constructed on a glass substrate by RAFT polymerization

492

Polymer brushes as active nanolayers for tunable bacteria adhesion

493

Polymer brushes: surface-immobilized macromolecules

494

Polymer brushes––surface immobilized polymers

495

Polymer bulk heterojunction photovoltaic devices based on complex donors and solution-processable functionalized graphene oxide

496

Polymer carriers for drug delivery in tissue engineering

497

POLYMER celebrates its 50th birthday in March 2010

498

Polymer cement plaster to prevent radon gas contamination within concrete building structures

499

Polymer chain collapse near the lower critical solution temperature

500

Polymer chain conformation in the phase separation process of a binary liquid mixture

501

Polymer chain conformation of copolymers with different monomer size: 13C NMR spectroscopy and MALS study

502

Polymer chain diffusion and Li+ hopping of poly(ethylene oxide)/LiAsF6 crystalline polymer electrolytes as studied by solid state NMR and ac impedance

503

Polymer chain dynamics under nanoscopic confinements

504

Polymer chain orientations in KC60 and RbC60: structural analysis and relation with electronic properties

505

Polymer chain pinning at interfaces in CaCO3–SBR latex composites

506

Polymer chain scission, oligomer production and diffusion: A two-scale model for degradation of bioresorbable polyesters

507

Polymer chains and baryons in a strongly coupled quark–gluon plasma Original Research Article

508

Polymer chains in good solvent facing impenetrable walls: what is the distance to the wall in lattice Monte Carlo simulations

509

Polymer chains in semidilute solutions confined to a square channel: mean-field Gaussian chain theory and comparison with simulation results

510

Polymer characterization by laser desorption with multiphoton ionization of end-group chromophores

511

Polymer characterization by size-exclusion chromatography with multiple detection

512

Polymer charge-transfer complexes for opto-electronic applications

513

Polymer chip incorporated with anionic surfactant-ISFET for microflow analysis of anionic surfactants

514

Polymer class specificity of the glass temperature

515

Polymer coat protects cells: Nanomedicine

516

Polymer coated QCM sensor with modified electrode for the detection of DDVP

517

Polymer coated QCM sensor with modified electrode for the detection of DDVP

518

Polymer coated quartz crystal microbalance sensors for detection of volatile organic compounds in gas mixtures Original Research Article

519

Polymer coated sensor array based on quartz crystal microbalance for chemical agent analysis

520

Polymer coated vermiculite–iron composites: Novel floatable magnetic adsorbents for water spilled contaminants

521

Polymer coating method developed for carbon stripper foils

522

Polymer coating method developed for carbon stripper foils

523

Polymer coating/encapsulation of nanoparticles using a supercritical anti-solvent process

524

Polymer coatings for biomedical applications using atmospheric pressure plasma

525

Polymer coatings to functionalize carbon nanotubes

526

Polymer colloids, conducting polymers and block co-polymers

527

Polymer compatibility with refrigeration lubricants

528

Polymer compatibility with refrigeration lubricants

529

Polymer complexes XXXIV. Potentiometric and thermodynamic studies of monomeric and polymeric complexes containing 2-acrylamidosulphadiazine

530

Polymer complexes. LIV. Structural and spectral studies of supramolecular coordination polymers built from Ni(II), Fe(II) and Pd(II) with sulphadrug

531

Polymer complexes. LVII. Supramolecular assemblies of novel polymer complexes of dioxouranium(VI) with some substituted allyl azo dye compounds

532

Polymer complexes. XLXI. Supramolecular spectral studies on metal–ligand bonding of novel rhodanine sulphadrugs hydrazone

533

Polymer composite biomaterials from polyethylene/poly(vinyl acetate) prepared in supercritical carbon dioxide and their bulk and surface characterization

534

Polymer composite-based OFET sensor with improved sensitivity towards nitro based explosive vapors

535

Polymer composites with the dielectric constant comparable to that of barium titanate ceramics

536

Polymer concentration dependence of the dynamics in gel electrolytes

537

Polymer concentration dependence of the gel point for chemically modified biopolymer networks using small amplitude oscillatory rheometry

538

Polymer concentration, shear and stretch field effects on the surface morphology evolution during the spin-coating

539

Polymer concrete composites for enhancement of mobility of troops in desert operations

540

Polymer concrete with recycled PET: The influence of the addition of industrial waste on flammability

541

Polymer concrete-filled steel tubes under axial compression

542

Polymer concrete–GRP plate hybrid joints for transverse moment–shear continuity in GRP bridge decks

543

Polymer conformation in mixed aqueous-polar organic solvents

544

Polymer conformation-assisted wrapping of single-walled carbon nanotube: The impact of cis-vinylene linkage

545

Polymer conjugates for cancer therapy

546

Polymer conjugates: nanosized medicines for treating cancer

547

Polymer cover induced self-excited vibrations of nipped rolls

548

Polymer crosslinking controlled by release of catalyst encapsulated in polycarbonate micro-spheres

549

Polymer crystallization from the metastable melt: The formation mechanism of spherulites

550

Polymer degradation initiated via infectious behavior

551

Polymer degradation studies using laser pyrolysis-FTIR microanalysis

552

Polymer degradation studies using laser pyrolysis-FTIR microanalysis

553

Polymer depletion interaction between a particle and a wall

554

Polymer depressants at the talc–water interface: adsorption isotherm, microflotation and electrokinetic studies

555

Polymer derived ceramic microparts from X-ray lithography—cross-linking behavior and process optimization

556

Polymer derived Si–C–B–N ceramics via hydroboration from borazine derivatives and trivinylcyclotrisilazane

557

Polymer design for high temperature shape memory: Low crosslink density polyimides

558

Polymer diffraction gratings on stimuli-responsive hydrogel surfaces: Soft-lithographic fabrication and optical sensing properties

559

Polymer diodes using poly(3,4-dicyanothiophene)

560

Polymer diodes with a blend of MEH-PPV and conjugated polyquinoline

561

Polymer dispersed liquid crystal films for modulating infra-red radiation

562

Polymer dispersed liquid crystals: effects of photorefractivity and local heating on holographic recording Original Research Article

563

Polymer dispersions and their interaction with mortar constituents and ceramic tile surfaces studied by zeta-potential measurements and atomic force microscopy

564

Polymer displacement/shielding in protein chromatography

565

Polymer dots for quantifying the total hydrophobic pathogenic lysates in a single drop

566

Polymer drying, 11: Desorption studies using poly-(Styrene-co-divinylbenzene) samples that had been swelled to saturation in chloromethanes

567

Polymer drying, 12: kinetic evidence for synergistic interaction between polymer relaxation and desorption from polystyrene in a glassy state

568

Polymer durability estimates based on apparent activation energies for thermal oxidative degradation

569

Polymer dynamics applied to PEEK matrix composite welding

570

Polymer dynamics in chaotic flows with a strong shear component

571

Polymer dynamics of DOC networks and gel formation in seawater

572

Polymer effects on the equimolar mixed cationic–anionic surfactants

573

Polymer electrodes doped with heteropolymetallates and their use within solid-state supercapacitors

574

Polymer electroluminescence in the near infra-red

575

Polymer electroluminescent diodes with microcylindrical geometry

576

Polymer electrolyte for lithium batteries based on photochemically crosslinked poly(ethylene oxide) and ionic liquid

577

Polymer electrolyte fuel cell mini power unit for portable application

578

Polymer electrolyte fuel cell stack research and development

579

Polymer electrolyte fuel cell stack thermal model to evaluate sub-freezing startup

580

Polymer electrolyte fuel cells based on bimetallic carbon nitride electrocatalysts

581

Polymer electrolyte fuel cells based on phosphoric acid doped polybenzimidazole (PBI) membranes

582

Polymer electrolyte fuel cells employing electrodes with gas-diffusion layers of mesoporous carbon derived from a sol–gel route Original Research Article

583

Polymer electrolyte hybrid membranes prepared by radiation grafting of p-styryltrimethoxysilane into poly(ethylene-co-tetrafluoroethylene) films

584

Polymer electrolyte membrane based on 2-acrylamido-2-methyl propanesulfonic acid fabricated by embedded polymerization

585

Polymer electrolyte membrane fuel cell contamination: Testing and diagnosis of toluene-induced cathode degradation

586

Polymer electrolyte membrane fuel cells for communication applications

587

Polymer electrolyte membrane resistance model

588

Polymer electrolyte membrane water electrolyser with Aquivion® short side chain perfluorosulfonic acid ionomer binder in catalyst layers

589

Polymer electrolyte membrane with high selectivity ratio for direct methanol fuel cells: A preliminary study based on blends of partially sulfonated polymers polyaniline and PVdF-co-HFP

590

Polymer electrolyte membranes derived from modified poly(phthalazinone ether ketone) for fuel cell applications

591

Polymer electrolyte membranes derived from novel fluorine-containing poly(arylene ether ketone)s by controlled post-sulfonation

592

Polymer electrolyte membranes from fluorinated polyisoprene-block-sulfonated polystyrene: Membrane structure and transport properties

593

Polymer electrolyte membranes from fluorinated polyisoprene-block-sulfonated polystyrene: Microdomain orientation by external field

594

Polymer electrolyte membranes from fluorinated polyisoprene-block-sulfonated polystyrene: Structural evolution with hydration and heating

595

Polymer electrolyte plasticized with PEG-borate ester having high ionic conductivity and thermal stability

596

Polymer electrolyte system based on (PEO+KBrO3) — its application as an electrochemical cell

597

Polymer electrolyte-graphene composites: Conductivity peaks and reasons thereof

598

Polymer electrolytes and polyelectrolytes: Monte Carlo simulations of thermal effects on conduction

599

Polymer electrolytes and the electric vehicle

600

Polymer electrolytes as humidity sensors: progress in improving an impedance device

601

Polymer electrolytes based on a ternary miscible blend of poly(ethylene oxide), poly(bisphenol A-co-epichlorohydrin) and poly(vinyl ethyl ether)

602

Polymer electrolytes based on acrylonitrile–butyl acrylate copolymers and lithium bis(trifluoromethanesulfone)imide

603

Polymer electrolytes based on an electrospun poly(vinylidene fluoride-co-hexafluoropropylene) membrane for lithium batteries

604

Polymer electrolytes based on blends of poly(ether urethane) and polysiloxanes

605

Polymer electrolytes based on copolymer of poly(ethylene glycol) dimethacrylate and imidazolium ionic liquid

606

Polymer electrolytes based on cross-linked cyclotriphosphazenes

607

Polymer electrolytes based on cross-linked linear poly(ethylenimine) hydrochloride/phosphoric acid systems

608

Polymer electrolytes based on ethylene oxide–epichlorohydrin copolymers

609

Polymer electrolytes based on hyperbranched polymer with cross-linkable groups at the terminals

610

Polymer electrolytes based on hyperbranched polymers

611

Polymer electrolytes based on modified natural rubber

612

Polymer electrolytes based on modified natural rubber for use in rechargeable lithium batteries

613

Polymer electrolytes based on new aryl-containing lithium perfluorosulfonates

614

Polymer electrolytes based on PEO and aluminum carboxylates

615

Polymer electrolytes based on poly(ethyleye oxide) and cross-linked poly(ethylene oxide-co-propylene oxide)

616

Polymer electrolytes based on poly(vinylidene fluoride-co-hexafluoropropylene) nanofibrous membranes containing polymer plasticizers for lithium batteries

617

Polymer electrolytes based on poly(vinylidene fluoride-co-hexafluoropropylene) with crosslinked poly(ethylene glycol) for lithium batteries

618

Polymer electrolytes based on sulfonated polysulfone for direct methanol fuel cells

619

Polymer electrolytes based on the doped comb-branched copolymers for Li-ion batteries

620

Polymer electrolytes composed of lithium tetrakis(pentafluorobenzenethiolato) borate and poly(fluoroalkylcarbon)s

621

Polymer electrolytes confined in nanopores: using water as a means to explore the interfacial impedance at the nanoscale

622

Polymer electrolytes containing ionic liquids with acidic counteranion (DMRImH2PO4, R = ethyl, butyl and octyl)

623

Polymer electrolytes derived from dendritic polyether macromonomers

624

Polymer electrolytes derived from polynorbornenes with pendent cyclophosphazenes: poly(ethylene glycol) methyl ether (PEGME) derivatives

625

Polymer electrolytes for a hydrogen economy

626

Polymer electrolytes for dye-sensitized solar cells prepared by photopolymerization of PEG-based oligomers

627

Polymer electrolytes having a dendrimer structure

628

Polymer electro-optic devices for integrated optics Original Research Article

629

Polymer encapsulation of surface-modified carbon blacks using surfactant-free emulsion polymerisation

630

Polymer Enhanced Fusion of Model Sperm Membranes as Induced by Calcium

631

Polymer entanglement – A barrier to nanoparticles aggregation

632

POLYMER enters its 50th year of publication

633

Polymer equations of state derived from molecular simulation

634

Polymer evolution of a sulfonated polysulfone membrane as a function of ion beam irradiation fluence

635

Polymer FET with a conducting channel

636

Polymer field effect transistors fabricated by dewetting

637

Polymer field-theory simulations on graphics processing units Original Research Article

638

Polymer film dynamics using X-ray photon correlation spectroscopy

639

Polymer film rupturing in comparison with leveling and dewetting

640

Polymer film sensor for sampling and remote analysis of polycyclic aromatic hydrocarbons in clear and turbid aqueous environments

641

Polymer film sensor for sampling and remote analysis of polycyclic aromatic hydrocarbons in clear and turbid aqueous environments Original Research Article

642

Polymer films as permselective coatings for H2O2-sensing electrodes

643

Polymer films filled with organic molecules by CO2 laser evaporation in vacuum

644

Polymer films in the normal-liquid and supercooled state: a review of recent Monte Carlo simulation results

645

Polymer films on electrodes: Part 29. Electropolymerized poly(7,14-diphenylacenaphtho[1,2-k]fluoranthene): electrochemistry and conductance of a novel electrochromic hydrocarbon ladder polymer film

646

Polymer Films Possessing Nanoreinforcements via Organically Modified Layered Silicate

647

Polymer films releasing nisin and/or natamycin from polyvinyldichloride lacquer coating: Nisin and natamycin migration, efficiency in cheese packaging Original Research Article

648

Polymer films with surfaces unmodified and modified by non-thermal plasma as new substrates for cell adhesion

649

Polymer flooding design and optimization under economic uncertainty

650

Polymer foams for personal protection: cushions, shoes and helmets

651

Polymer foams for personal protection: cushions, shoes and helmets

652

Polymer formation utilizing ‘crisscross’ addition (crisscross addition polymerization) of acetaldehyde azine and 1,4-phenylene diisocyanate

653

Polymer fractionation using chromatographic column packed with novel regenerated cellulose beads modified with silane

654

Polymer fracture forms nano-grooves: Nanofabrication

655

Polymer fume fever after use of a household product

656

Polymer gear surface thermal wear and its performance prediction

657

Polymer gel dosimetry using computed tomography

658

Polymer gel dosimetry using computed tomography

659

Polymer gel electrolyte

660

Polymer gel electrolyte supported with microporous polyolefin membranes for lithium ion polymer battery

661

Polymer Gel Electrolytes Based on 49% Methyl-Grafted Natural Rubber

662

Polymer gel electrolytes prepared by thermal curing of poly(vinylidene fluoride)–hexafluoropropene/poly(ethylene glycol)/propylene carbonate/lithium perchlorate blends

663

Polymer gel electrolytes synthesized by photopolymerization in the presence of star-shaped oligo(ethylene glycol) ethers (OEGE)

664

Polymer genomics: An insight into pharmacology and toxicology of nanomedicines

665

Polymer geometry and Li+ conduction in poly(ethylene oxide)

666

Polymer grade transition control using advanced real-time optimization software

667

Polymer grafted hydroxyapatite whisker as a filler for dental composite resin with enhanced physical and mechanical properties

668

Polymer grafted silver and copper nanoparticles with exceptional stability against aggregation by a high yield one-pot synthesis

669

Polymer grafting surface as templates for the site-selective metallization

670

Polymer gratings achieved by focused ion beam

671

Polymer growth rate in a wire chamber with oxygen, water, or alcohol gas additives

672

Polymer growth rate in a wire chamber with oxygen, water, or alcohol gas additives

673

Polymer heterojunction photodiodes with MEHPPV doped with organic acceptors

674

Polymer heterostructures with embedded carbon nanotubes for efficient photovoltaic cells

675

Polymer hollow fiber three-dimensional matrices with controllable cavity and shell thickness

676

Polymer hollow particles: Encapsulation of phosphoric acid partial esters and morphology manipulation

677

Polymer hybrids of functionalized silsesquioxanes and organic polymers utilizing the sol–gel reaction of tetramethoxysilane

678

Polymer hydrogel assisted combustion synthesis of highly crystalline ceramic nanoparticles for SOFC electrolyte films

679

Polymer hydrogel supported Pd–Ni–B nanoclusters as robust catalysts for hydrogen production from hydrolysis of sodium borohydride

680

Polymer ignition

681

Polymer immobilized silane bridged metallocene catalysts for ethylene polymerization

682

Polymer impact on filter blinding during alum sludge filtration

683

Polymer impinged CdS/CuInSe2 solar cell

684

Polymer implant promotes axon growth in rat model of SCI

685

Polymer impregnation and pyrolysis (PIP) method for the preparation of laminated woven fabric/mullite matrix composites with pseudoductility

686

Polymer impregnation and pyrolysis process development for improving thermal conductivity of SiCp/SiC–PIP matrix fabrication

687

Polymer in a strip: profile of the monomer density

688

Polymer inclusion membranes (PIMs) with the ionic liquid (IL) Aliquat 336 as extractant: Effect of base polymer and IL concentration on their physical–chemical and elastic characteristics

689

Polymer inclusion membranes: The concept of fixed sites membrane revised

690

Polymer incompatibility as a potential tool for polyphenol recovery from olive mill wastewater

691

Polymer indentation: Numerical analysis and comparison with a spherical cavity model

692

Polymer induced crystal organization of composite resins

693

Polymer induced flocculation and separation of particulates from extracts of lignocellulosic materials

694

Polymer infrared photo-detector with high sensitivity up to 1100 nm

695

Polymer interfaces and emulsions, Edited by K. Esumi, Marcel Dekker, New York, 1999. ISBN 0-8247-1975-1; US$195.00

696

Polymer interfaces and the molecular basis of adhesion

697

Polymer interphase structure near nanoscale inclusions: Comparison between random walk theory and experiment

698

Polymer intrusion into narrow pores at the interface between a poor solvent and adsorbing and non-adsorbing surfaces

699

Polymer leds as laser media ?

700

Polymer light emitting devices with Langmuir–Blodgett (LB) films: Enhanced performance due to an electron-injecting layer of ionomers

701

Polymer light emitting diodes based on LiF/Al composite cathode

702

Polymer light-emitting devices with phosphorescence and fluorescence dye double-doped polymer as emitting layer

703

Polymer light-emitting diode using a new trialkoxyalkyl substituted PPV derivative

704

Polymer light-emitting diodes placed in microcavities

705

Polymer light-emitting diodes utilizing poly(phenylene vinylene)derivatives

706

Polymer light-emitting diodes with a phenyleneethynylene derivative as a novel hole blocking layer for efficiency enhancements

707

Polymer light-emitting diodes with amorphous indium-zinc oxide anodes deposited at room temperature

708

Polymer light-emitting diodes with polyethylene dioxythiophene–polystyrene sulfonate as the transparent anode

709

Polymer light-emitting diodes with spin-polarised charge injection

710

Polymer light-emitting electrochemical cell based on a novel block copolymer containing tri(ethylene oxide) spacers

711

Polymer light-emitting electrochemical cells with 1-methyoxy-4-(2-ethylhexyoxy)benzene as salt carrier

712

Polymer localization in random potential

713

Polymer material-supported titania nanofibers with different polyvinylpyrrolidone to TiO2 ratios for degradation of vaporous trichloroethylene

714

Polymer matrices effects on the sensitivity and the selectivity of optical chemical sensors

715

Polymer matrix composites filled with nanoporous metal powders: Preparation and electrical properties

716

Polymer matrix degradation and color formation in melt processed nylon 6/clay nanocomposites

717

Polymer matrix of polyethylene porous films functionalized by electrical discharge plasma

718

Polymer matrix–filler interaction mechanism for modified ion transport and glass transition temperature in the polymer electrolyte composites

719

Polymer mechanics as a model for short-term and flow-independent cartilage viscoelasticity

720

Polymer mediated capillary electrophoresis with attenuated total reflectance infrared microspectroscopy detection Original Research Article

721

Polymer mediated formation of corona-embedded gold nanoparticles in block polyelectrolyte micelles

722

Polymer mediated peptide immobilization onto amino-containing N-Tisopropylacrylamide-styrene core-shell particles

723

Polymer melt flow in plane channels: Hydrodynamic and thermal boundary layers

724

Polymer melt rheology with high-pressure CO2 using a novel magnetically levitated sphere rheometer

725

Polymer membrane air separation performance for portable oxygen enriched combustion applications

726

Polymer Membrane Ion-Selective Electrodes-What are the Limits?

727

Polymer Membrane Ion-Selective Electrodes-What are the Limits?

728

Polymer membrane sensors for sildenafil citrate (Viagra) determination in pharmaceutical preparations

729

Polymer membrane sensors for sildenafil citrate (Viagra) determination in pharmaceutical preparations Original Research Article

730

Polymer membranes for gas separation

731

Polymer membranes for hydrocarbon separation and removal

732

Polymer membranes loaded with lipids for taste sensing: electrochemical impedance spectroscopy studies Original Research Article

733

Polymer Membranes with Two-Dimensionally Arranged Pores Derived from Monolayers of Silica Particles

734

Polymer memories: Bistable electrical switching and device performance

735

Polymer mesocomposites: Ultrafiltration membrane materials with enhanced permeability, selectivity and fouling resistance

736

Polymer metal composite microspheres: Preparation and characterization of poly(St-co-AN)Ni microspheres

737

Polymer micelle-like aggregates of novel amphiphilic biodegradable poly(asparagine) grafted with poly(caprolactone)

738

Polymer micelles with pyridyl disulfide-coupled antigen travel through lymphatics and show enhanced cellular responses following immunization

739

Polymer micro and nanocomposites: Structure, interactions, properties

740

Polymer microarrays: Identification of substrates for phagocytosis assays

741

Polymer microcapsules by interfacial polyaddition between styrene–maleic anhydride copolymers and amines

742

Polymer microcavities by room temperature electron-beam evaporation of TiOx and SiOx

743

Polymer microchip integrated with nano-electrospray tip for electrophoresis–mass spectrometry

744

Polymer micro-environmental effects on the fluorescence characteristics of 5-aminoquinoline and 3-aminoquinoline

745

Polymer microenvironmental effects on the photophysics of cinchonine dication

746

Polymer microfluidic devices

747

Polymer micromachining for micro- and nanophotonics

748

Polymer microparticles production by supercritical assisted atomization

749

Polymer Microspheres with Permanent Antibacterial Surface from Surface-Initiated Atom Transfer Radical Polymerization

750

Polymer Microspray with an Integrated Thick-Film Microelectrode

751

Polymer miscibility, phase separation, morphological modifications and polymorphic transformations in dense fluids

752

Polymer modeling

753

Polymer modification by MEVVA source deposited and ion implantation

754

Polymer modification by supercritical impregnation

755

Polymer modification of bitumen: Advances and challenges

756

Polymer modified asphalt binders

757

Polymer Modified Carbon Paste Electrode as a Sensitive Sensor for the Electrochemical Determination of Riboflavin and Its Application in Pharmaceutical and Biological Samples

758

Polymer modified clay minerals: A review

759

Polymer modified glassy carbon electrode for the electrochemical determination of caffeine in coffee

760

Polymer modified jute fibre as reinforcing agent controlling the physical and mechanical characteristics of cement mortar

761

Polymer molding simulation – a mathematical imaging approach based on propagation of discrete distances

762

Polymer molecular weight and chain transfer during the photopolymerization of an aliphatic monoacrylate in a smectic liquid crystal

763

Polymer monolith microextraction with in situ derivatization and its application to high-performance liquid chromatography determination of hexanal and heptanal in plasma

764

Polymer monoliths with chelating functionalities for solid phase extraction of metal ions from water

765

Polymer mortars prepared using a polymeric resin and particles obtained from waste pet bottle

766

Polymer multilayer film formation studied by in situ ellipsometry and electrochemistry

767

Polymer multilayer systems for electronic applications

768

Polymer nanocomposite coatings with non-linear elastic response

769

Polymer nanocomposite foams

770

Polymer nanocomposite membranes for DMFC application

771

Polymer nanocomposites based on transition metal ion modified organoclays

772

Polymer nanocomposites for bone tissue substitutes

773

Polymer nanocomposites for improved drug delivery efficiency

774

Polymer nanocomposites for lithium battery applications

775

Polymer nanocomposites using zinc aluminum and magnesium aluminum oleate layered double hydroxides: Effects of LDH divalent metals on dispersion, thermal, mechanical and fire performance in various polymers

776

Polymer nanocomposites: a new strategy for synthesizing solid electrolytes for rechargeable lithium batteries

777

Polymer nanocomposites: from fundamental research to specific applications

778

Polymer nano-encapsulation of templated mesoporous silica monoliths with improved mechanical properties

779

Polymer nanofibers assembled by electrospinning

780

Polymer nanogels: A versatile nanoscopic drug delivery platform

781

Polymer nanoparticle-based porous antireflective coating on flexible plastic substrate

782

Polymer- Nanoparticles Composites for the Reduction of the Bacterial Adherence to Surfaces

783

Polymer nanoparticles for enhanced immune response: Combined delivery of tumor antigen and small interference RNA for immunosuppressive gene to dendritic cells

784

Polymer nanoparticles to decrease thermal conductivity of phase change materials

785

Polymer nanoparticles via intramolecular crosslinking of sulfonyl azide functionalized polymers

786

Polymer nanosphere lithography: fabrication of an ordered trigonal polymeric nanostructure

787

Polymer nanotechnology: Nanocomposites

788

Polymer nanotube nanocomposites: Correlating intermolecular interaction to ultimate properties

789

Polymer Networks with Slip-links: 1. Constitutive Equations for an Uncross-linked Network

790

Polymer Networks with Slip-links: 2. Constitutive Equations for a Cross-linked Network

791

Polymer Ni–MH battery based on PEO–PVA–KOH polymer electrolyte

792

Polymer nomenclature: the controversy between source-based and structure-based representations (a personal perspective)

793

Polymer optical fibers for textile applications – Bicomponent melt spinning from cyclic olefin polymer and structural characteristics revealed by wide angle X-ray diffraction

794

Polymer particles with a pomegranate-like internal structure via micro-dispersive polymerization in a geometrically confined reaction space I. Experimental study

795

Polymer pattern transformation and inorganic polygonal networks driven by thermal degradation process

796

Polymer Percolation Threshold in Multi-Component HPMC Matrices Tablets

797

Polymer permeability and time lag at high concentrations of sorbate

798

Polymer photovoltaic cells based on conjugated polymer–fullerene composites

799

Polymer photovoltaic devices using highly conductive poly(3,4-ethylenedioxythiophene-methanol) electrode

800

Polymer photovoltaic devices with transparent graphene electrodes produced by spin-casting

801

Polymer Photovoltaics: A Practical Approach, Frederik C. Krebs (Ed.). Society of Photo-Optical Instrumentation Engineers (SPIE) Press, Bellingham, WA, USA (2008), ISBN: 978-0-8194-6781-2

802

Polymer physics of the cytoskeleton

803

Polymer pinning at an interface

804

Polymer plating on AZ31 magnesium alloy surface and film evaluation of corrosion property

805

Polymer pretreatments for enhanced adhesion of metals deposited by the electroless process

806

Polymer product engineering utilising oscillatory baffled reactors

807

Polymer recycling in aqueous two-phase extractions using thermoseparating ethylene oxide–propylene oxide copolymers

808

Polymer reinforced by flax fibres as a viscoelastoplastic material cc

809

Polymer relaxation spectroscopy - dynamic aspects of polymers

810

Polymer replication of 3D microstructures employing a high content fluorine separation layer

811

Polymer resist materials for excimer ablation lithography

812

Polymer science and technology for new generation photonics and biophotonics

813

Polymer science applied to biological problems: Prediction of cytotoxic drug interactions with DNA

814

Polymer selection for passive sampling: A comparison of critical properties Original Research Article

815

Polymer self-assembled nano-structures and surface relief gratings induced with laser at 157 nm

816

Polymer semicrystalline texture made by interplay of crystal growth

817

Polymer separations by liquid interaction chromatography: Principles – prospects – limitations

818

Polymer siRNA conjugates synthesised by controlled radical polymerisation

819

Polymer solar cell based on poly(2,6-bis(3-alkylthiophen-2-yl)dithieno-[3,2-b;2′,3′-d]thiophene)

820

Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing

821

Polymer solar cells based on MEH-PPV and PCBM

822

Polymer solar cells based on P3HT:PC71BM doped at different concentrations of isocyanate-treated graphene

823

Polymer solar cells based on P3HT:PC71BM doped at different concentrations of isocyanate-treated graphene

824

Polymer solar cells fabricated with 4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b′]dithiophene and alkyl-substituted thiophene-3-carboxylate-containing conjugated polymers: Effect of alkyl side-chain in thiophene-3-carboxylate monomer on the device performanc

825

Polymer solar cells using chlorinated indium tin oxide electrodes with high work function as the anode

826

Polymer solar cells with enhanced lifetime by improved electrode stability and sealing

827

Polymer solar cells: Recent development and possible routes for improvement in the performance

828

Polymer solid electrolytes based on viologen-type poly(oxytetramethylene) ionene

829

Polymer solutions in confining geometries

830

Polymer solutions in co-rotating Taylor–Couette flow without vorticity

831

Polymer solutions: A geometric introduction

832

Polymer stabilized silver nanoparticle: An efficient catalyst for proton-coupled electron transfer reaction and the electrochemical recognition of biomolecule

833

Polymer structure and dynamics, and polymer-polymer interactions

834

Polymer support with Schiff base functional group with cobaltous palmitate as oxidation catalyst for cyclohexane Original Research Article

835

Polymer supported bases in solution-phase synthesis. 2. A convenient method for N-alkylation reactions of weakly acidic heterocycles

836

Polymer supported calixarene derivative useful for solid-phase synthesis application

837

Polymer supported carbodiimide strategy for the synthesis of N-acylated derivatives of deoxy- and ribo purinenucleosides using active esters

838

Polymer supported cobalt(II) catalysts for alkene epoxidation Original Research Article

839

Polymer supported oxazolidin-2-ones derived from l-serine—a cautionary tale

840

Polymer supported palladium N-heterocyclic carbene complexes: long lived recyclable catalysts for cross coupling reactions

841

Polymer supported synthesis of aminooxyalkylated oligonucleotides, and some applications in the fabrication of microarrays Original Research Article

842

Polymer supports for low-temperature fuel cell catalysts Review Article

843

Polymer surface chemistry for biologically active materials

844

Polymer surface micropatterning by plasma and VUV-photochemical modification for controlled cell culture

845

Polymer surface modification and characterization of particulate calcium carbonate fillers

846

Polymer surface modification by plasmas and photons

847

Polymer surface modification for the attachment of bioactive compounds

848

Polymer surface morphology control by reactive ion etching for microfluidic devices

849

Polymer surface with graft chains

850

Polymer swelling and impregnation using supercritical CO2: A model-component study towards producing controlled-release drugs

851

Polymer swelling. Part 17: Systematization of steric effects on adsorption parameters as exemplified by swelling of poly(styrene-co-divinylbenzene) to saturation using linear and non-linear acyclic aliphatic ether liquids

852

Polymer swelling. Part 21: Studies that correlate adsorptivity with molecular structure in crosslinked polystyrene systems saturated with sulfur-containing organic liquids

853

Polymer synthesis and characterization in liquid / supercritical carbon dioxide

854

Polymer systems for gene delivery—Past, present, and future

855

Polymer tandem photovoltaic cells with molecularly intimate interfaces achieved by a thin-film transfer technique

856

Polymer temperature sensor for textronic applications

857

Polymer template fabrication of porous hydroxyapatite scaffolds with interconnected spherical pores

858

Polymer theory: path integrals and scaling

859

Polymer theory: path integrals and scaling

860

Polymer therapeutics: Clinical applications and challenges for development

861

Polymer therapeutics-prospects for 21st century: The end of the beginning

862

Polymer thermodynamics of adsorbed protein layers

863

Polymer thermoreversible gels from organogelators enabled by ‘click’ chemistry

864

Polymer thin film photodegradation and photochemical crosslinking: FT-IR imaging, evanescent waveguide spectroscopy, and QCM investigations

865

Polymer tips for application of atomic force microscopy

866

Polymer tips for application of atomic force microscopy

867

Polymer topology and Chern-Simons field theory Original Research Article

868

Polymer toughening using residue of recycled windshields: PVB film as impact modifier

869

Polymer toughness transfer in a transparent interpenetrating glass–polymer composite

870

Polymer tracer detection systems with UV fluorescence spectrometry to improve product recyclability

871

Polymer track membranes for atmospheric pressure field extraction of ions from liquid solutions

872

Polymer transcrystallinity induced by carbon nanotubes

873

Polymer translocation through a nanopore in mesoscopic simulations

874

Polymer tribo-electric charging: dependence on thermodynamic surface properties and relative humidity

875

Polymer versus monomer as displacer in immobilized metal affinity chromatography

876

Polymer vesicles formed by amphiphilic diblock copolymers containing a thermotropic liquid crystalline polymer block

877

Polymer vesicles in various media

878

Polymer waveguide devices with passive pigtailing: an application of LIGA technology

879

Polymer whiskers based on p-mercaptobenzoyl and p-oxybenzoyl blocks

880

Polymer/additive analysis by flash pyrolysis techniques

881

Polymer/bioactive glass nanocomposites for biomedical applications: A review

882

Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials

883

Polymer/carbon nanotube composites for liquid sensing: Model for electrical response characteristics

884

Polymer/carbon nanotube composites for liquid sensing: Selectivity against different solvents

885

Polymer/carrier composites as materials and reactors for organic synthesis

886

Polymer/clay aerogel composites with flame retardant agents: Mechanical, thermal and fire behavior

887

Polymer/clay nanocomposites as VOC barrier materials and coatings

888

Polymer/gold nanoparticles light emitting diodes utilizing high work function metal cathodes

889

Polymer/graphite nanocomposites: Effect of reducing the functional groups of graphite oxide on water barrier properties

890

Polymer/HIO4: An efficient catalyst for solvent-free synthesis of 2-naphthol azo dyes

891

Polymer/layered clay nanocomposites: 2 polyurethane nanocomposites

892

Polymer/layered silicate nanocomposite anticorrosive coatings

893

Polymer/layered silicate nanocomposites as high performance ablative materials

894

Polymer/layered silicate nanocomposites by combined intercalative polymerization and melt intercalation: a masterbatch process

895

Polymer/layered silicate nanocomposites: a review from preparation to processing

896

Polymer/montmorillonite nanocomposites with improved thermal properties: Part I. Factors influencing thermal stability and mechanisms of thermal stability improvement

897

Polymer/montmorillonite nanocomposites with improved thermal properties: Part II. Thermal stability of montmorillonite nanocomposites based on different polymeric matrixes

898

Polymer/nanosilver composite coatings for antibacterial applications

899

Polymer/organosilica nanocomposites based on polyimide with benzimidazole linkages and reactive organoclay containing isoleucine amino acid: Synthesis, characterization and morphology properties

900

Polymer/silicate nanocomposites synthesized with potassium persulfate at room temperature: polymerization mechanism, characterization, and mechanical properties of the nanocomposites

901

Polymer/Single-Walled Carbon Nanotube Films Assembled via Donor-Acceptor Interactions and Their Use as Scaffolds for Silica Deposition

902

Polymer/surfactant assisted self-assembly of nanoparticles into Langmuir–Blodgett films

903

Polymer/surfactant interactions at the air/water interface

904

Polymer/ZnO hybrid materials for near-UV sensors with wavelength selective response

905

Polymer\Ag composite microspheres produced by water-in-oil-in-water emulsion polymerization and their application for a preservative

906

Polymer\Gold Nanoparticle Nanocomposite Light-Emitting Diodes: Enhancement of Electroluminescence Stability and Quantum Efficiency of Blue-Light-Emitting Polymers

907

Polymerae Chain Reaction and Goldmann-Witmer Coefficient Analyi Are Complimentary for the Diagnoi of Infectiou Uveiti

908

Polymerae chain reaction diagnoi in fungal keratiti caued by Alternaria alternata

909

Polymerae Chain Reaction–Baed Rik Aement for Wilm Tumor in poradic Aniridia Original Reearch Article

910

Polymerase Chain Reaction (PCR) Assay for Rapid Diagnosis and Its Role in Prevention of Human Brucellosis in Punjab, India

911

Polymerase chain reaction (PCR) for detection of Brucella melitensis in goat milk

912

Polymerase chain reaction (PCR) is highly sensitive for diagnosis of mucosal leishmaniasis

913

Polymerase Chain Reaction (PCR): An Alternative Rapid Method for Detection of Some Microbial Contamination of Meat Products

914

Polymerase Chain Reaction Amplification as a Diagnostic Tool in Culture-Negative Multiple-Valve Endocarditis

915

Polymerase chain reaction amplification fails to detect aromatase cytochrome P450 transcripts in primary human and rat bone or bone marrow

916

Polymerase chain reaction analysis of oestrogen and androgen receptor expression in human gingival and periodontal tissue

917

Polymerase chain reaction analysis of transgenic plants contaminated by Agrobacterium

918

Polymerase Chain Reaction and Its Application in the Diagnosis of Infectious Keratitis

919

Polymerase chain reaction assay for identification of chicken in meat and meat products

920

Polymerase chain reaction assay targeting cytochrome b gene for the detection of dog meat adulteration in meatball formulation

921

Polymerase chain reaction assay targeting nox gene for rapid identification of Brachyspira canis in dogs

922

Polymerase chain reaction characterization of trypanosomes in Glossina morsitans submorsitans and G. tachinoides collected on the game ranch of Nazinga, Burkina Faso

923

Polymerase chain reaction detection of candidatus liberibacter asiatic associated with citrus huanglonbing

924

Polymerase Chain Reaction Detection of Capnocytophaga canimorsus and Capnocytophaga cynodegmi as the Emerging Zoonosis

925

Polymerase chain reaction detection of Listeria monocytogenes using oligonucleotide primers targeting actA gene

926

Polymerase chain reaction determination of RhC, Rhc, and RhE blood types: An evaluation of accuracy and clinical utility, ,

927

Polymerase chain reaction diagnosis of enterovirus in children with aseptic meningitis

928

Polymerase chain reaction efficiency improved by water soluble β-cyclodextrins capped platinum nanoparticles

929

Polymerase chain reaction fidelity and denaturing high-performance liquid chromatography

930

Polymerase chain reaction for detecting Escherichia coli O157:H7

931

Polymerase chain reaction for detection of Kaposi’s sarcoma virus in breast tumors

932

Polymerase chain reaction for the detection and differentiation of Marek s disease virus strains MDV-l and HVT.

933

Polymerase chain reaction for the detection of flaA-1 genes of oral spirochaetes in human advanced periodontal pockets

934

Polymerase Chain Reaction for the Diagnosis of Tuberculosis

935

Polymerase chain reaction in endomyocardial biopsies for monitoring reactivation of Chagasʹ disease in heart transplantation: A case report and review of the literature

936

Polymerase chain reaction in liposomes Original Research Article

937

Polymerase chain reaction made simple

938

Polymerase chain reaction method for the rapid detection of virulent Shigella spp

939

Polymerase chain reaction of cerebrospinal fluid to diagnose Whippleʹs disease

940

Polymerase Chain Reaction of Mgc2 and 16S rRNA Genes for Detection of Mycoplasma gallisepticum

941

Polymerase Chain Reaction of Mgc2 and 16S rRNA Genes for Detection of Mycoplasma gallisepticum

942

Polymerase chain reaction of nanoparticle-bound primers Original Research Article

943

Polymerase chain reaction primers for the detection of Ceratobasidium bicorne (uninucleate Rhizoctonia

944

Polymerase chain reaction products (PCR) on “DNA barcode zone” resolved by temporal temperature gradient electophoresis: A tool for species identification of mixed meat specimens – A technical note on preliminary results

945

Polymerase chain reaction reveals Trypanosoma cruzi infection suspected by serology in cutaneous and mucocutaneous leishmaniasis patients

946

Polymerase chain reaction search for viral etiology of vulvar vestibulitis syndrome, ,

947

Polymerase Chain Reaction Study of Anogenital Condylomas for High Risk HPV Types

948

Polymerase Chain Reaction Study of Anogenital Condylomas for High Risk HPV Types

949

Polymerase chain reaction typing of Pasteurella multocida capsules isolated in Iran

950

Polymerase chain reaction used for the detection of airborne Mycobacterium tuberculosis in health care settings

951

Polymerase Chain Reaction, Bacteriologic Detection and Antibiogram of Bacteria Isolated from Otitis Media with Effusion in Children, Shiraz, Iran

952

Polymerase Chain Reaction: A Markov Process Approach

953

Polymerase chain reaction-based identification of New World Leishmania species complexes by specific kDNA probes

954

Polymerase chain reaction-based prevalence of hepatitis A, hepatitis E and TT viruses in sewage from an endemic area

955

Polymerase chain reaction-based technique for the selective enrichment and analysis of mosaic arg201 mutations in Gαs from patients with fibrous dysplasia of bone

956

Polymerase chain reaction-based technique for the selective enrichment and analysis of mosaic arg201 mutations in Gαs from patients with fibrous dysplasia of bone

957

Polymerase Chain Reaction-Restriction Fragment Length Polymorphism (PCR-RFLP) Analysis of Three Lipooligosaccharide-Associated Genes of Campylobacter jejuni and Campylobacter coli Isolated From Animal Samples

958

POLYMERASE CHAIN REACTION-SEQUENCE SPECIFIC PRIMER (PCR-SSP) VERSUS SEROLOGY IN TYPING OF HLA-A, -B AND -C IN IRANIAN PATIENTS

959

Polymerase Chaperoning and Multiple ATPase Sites Enable the E. coli DNA Polymerase III Holoenzyme to Rapidly Form Initiation Complexes

960

Polymerase eta Is a Short-lived, Proteasomally Degraded Protein that Is Temporarily Stabilized Following UV Irradiation in Saccharomyces cerevisiae

961

Polymerase β simulations suggest that Arg258 rotation is a slow step rather than large subdomain motions per se

962

Polymerase-Chain-Reaction-Based Detection of Fetal Rhesus D and Y-Chromosome-Specific DNA in the Whole Blood of Pregnant Women during Different Trimesters of Pregnancy

963

Polymerase-Tailored Variations in the Water-Mediated and Substrate-Assisted Mechanism for Nucleotidyl Transfer: Insights from a Study of T7 DNA Polymerase

964

Polymer-assistant hydrothermal synthesis of lead zirconate titanate nanorolls and their strong blue-light emission

965

Polymer-assisted assembly of carbon nanotubes via a template-based method

966

Polymer-assisted complexing controlled orientation growth of ZnO nanorods

967

Polymer-assisted crystallization of low-dimensional lead sulfide particles

968

Polymer-assisted fabrication of nanoparticles and nanocomposites

969

Polymer-Assisted horner–Emmons olefination using PASSflow reactors: pure products without purification

970

Polymer-assisted hydrothermal synthesis of trigonal selenium nanorod bundles

971

Polymer-assisted precipitation of ZnO nanoparticles with narrow particle size distribution

972

Polymer-assisted size control of water-dispersible iron oxide nanoparticles in range between 15 and 100 nm

973

Polymer-Assisted solution-Phase (PASP) parallel synthesis of an α-Ketothiazole library as tissue factor VIIa inhibitors

974

Polymer-assisted solution-phase library synthesis of 4-alkoxy-2-hydroxy-3,5,6-trifluorobenzoic acids

975

Polymer-assisted solution-phase parallel synthesis of dipeptide p-nitroanilides and dipeptide diphenyl phosphonates

976

Polymer-Assisted Synthesis and Characterization of Nickel Aluminate Nanoparticles for Photodegradation of Methylene Blue

977

Polymer-assisted synthesis of aligned amorphous silicon nanowires and their core/shell structures with Au nanoparticles

978

Polymer-assisted synthesis of BaTiO3 nanorods

979

Polymer-assisted synthesis of hydroxyapatite nanoparticle

980

Polymer-assisted synthesis of metallopolymer nanocomposites and their applications in liquefied petroleum gas sensing at room temperature

981

Polymer-based 1 * 6 thermooptic switch incorporating an elliptic TIR waveguide mirror

982

Polymer-based admixtures

983

Polymer-based adsorption medium prepared using a fragment imprinting technique for homologues of chlorinated bisphenol A produced in the environment

984

Polymer-based blue electrophosphorescent light-emitting diodes based on a new iridium(III) diazine complex

985

Polymer-Based Blue Electrophosphorescent Light-Emitting Diodes Using a Bisorthometalated Ir (III) Complex as the Triplet Emitter

986

Polymer-based electrospray device with multiple nozzles to minimize end effect phenomenon

987

Polymer-based flexible microlens arrays with hermaphroditic focusing properties

988

Polymer-based fluorescence sensor incorporating triazole moieties for Hg2+ detection via click reaction

989

Polymer-based fluorescent sensor incorporating 2,2′-bipyridyl and benzo[2,1,3]thiadiazole moieties for Cu2+ detection

990

Polymer-based light-emitting devices: investigations on the role of the indium—tin oxide (ITO) electrode

991

Polymerbased Material for LithiumIon Batteries: Structure, Material Engineering, Device Performance and Challenges (Review)

992

Polymer-based materials for repair and improved durability: Japanese experience

993

Polymer-based membranes applied to gas separation: material and engineering aspects Original Research Article

994

Polymer-based microsensor for soil moisture measurement

995

Polymer-based micro-sensor paired arrays for the determination of primary alcohol vapors

996

Polymer-based micro-sensor paired arrays for the determination of primary alcohol vapors

997

Polymer-based nanoadjuvants for hepatitis C vaccine: The perspectives of immunologists

998

Polymer-based nanocomposites for organic optoelectronic devices. A review

999

Polymer-Based Paclitaxel-Eluting Stents Are Superior to Nonpolymer-Based Paclitaxel-Eluting Stents in the Treatment of De Novo Coronary Lesions

1000

Polymer-based paclitaxel-eluting stents reduce in-stent neointimal tissue proliferation: A serial volumetric intravascular ultrasound analysis from the TAXUS-IV trial Original Research Article

بازگشت