<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Preparation of Polystyrene-Supported (alpha)-Seleno Acetate and Application to Solid-Phase Synthesis of (beta)-Keto Esters
2
Preparation of polystyrene-supported Lewis acidic Fe(III) ionic liquid and its application in catalytic conversion of carbon dioxide
3
Preparation of polystyrene-supported soluble palladacycle catalyst for Heck and Suzuki reactions
4
Preparation of polysulfone membranes via vapor-induced phase separation and simulation of direct-contact membrane distillation by measuring hydrophobic layer thickness Original Research Article
5
Preparation of polysulfone nanofiltration membranes by UV-assisted grafting polymerization for water softening Original Research Article
6
PREPARATION OF POLYSULFONE NANO-STRUCTURED MEMBRANE FOR SULPHATE IONS REMOVAL FROM WATER
7
Preparation of polysulfone–Fe3O4 composite ultrafiltration membrane and its behavior in magnetic field
8
Preparation of polysulfone–polyamide thin film composite hollow fiber nanofiltration membranes and their performance in the treatment of aqueous dye solutions Original Research Article
9
Preparation of polytetrafluoroethylene porous membrane based composite alkaline exchange membrane with improved tensile strength and its fuel cell test
10
Preparation of polythiophene LB films and their gas sensitivities by the quartz crystal microbalance
11
Preparation of polyurea capsules using electrocapillary emulsification
12
Preparation of polyurea microcapsules containing ovalbumin
13
Preparation of polyurea microcapsules with different composition ratios: structures and thermal properties
14
Preparation of polyurea microcapsules with different composition ratios: structures and thermal properties
15
Preparation of polyurethane-based aerogels and xerogels for thermal superinsulation
16
Preparation of polyvinyl alcohol–silica hybrid heterogeneous anion-exchange membranes by sol–gel method and their characterization
17
Preparation of Polyvinylchloride Nanofiltration Membrane: Investigation of the Effect of Thickness, Prior Evaporation Time and Addition of Polyethylenglchol as Additive on Membrane Performance and Properties
18
Preparation of polyvinylidene fluoride hollow fiber membranes for CO2 absorption using phase-inversion promoter additives
19
Preparation of polyvinylpyrrolidone-protected Prussian blue nanocomposites in microemulsion
20
Preparation of polyynes by laser ablation of graphite in aqueous media
21
Preparation of polyynes by liquid-phase laser ablation using different irradiation target materials and solvents Original Research Article
22
Preparation of polyynes up to C22H2 by liquid-phase laser ablation and their immobilization into SiO2 gel Original Research Article
23
Preparation of Pooled Arabidopsis YAC DNAs for PCR-Based Mapping
24
Preparation of porcelain tiles from Egyptian raw materials
25
Preparation of pore expanded mesoporous hydroxyapatite via auxiliary solubilizing template method
26
Preparation of pore size controllable macroporous polymer beads
27
Preparation of pore-filled responsive membranes using dextran precipitation
28
Preparation of porous (Ba,Sr)TiO3 by adding corn-starch Original Research Article
29
Preparation of porous Al2TiO5 ceramics reinforced by in situ formation of mullite whiskers
30
Preparation of Porous Alumina/Nano-Nickel Composite by Gel Casting and Carbothermic Reduction
31
Preparation of porous alumina–carbon nanotube composites via direct growth of carbon nanotubes
32
Preparation of porous aluminium oxide (Al2O3) hollow fibre membranes by a combined phase-inversion and sintering method
33
PREPARATION OF POROUS and DENSE BULK SAMPLES IN CALCIUM MAGNESIUM SILICATE SYSTEMS USING STEEL SLAG and DIFFERENT ADDITIVE BY CONVENTIONAL SINTERING METHOD (TECHNICAL NOTE)
34
Preparation of porous and hollow Mn2O3 microspheres and their adsorption studies on heavy metal ions from aqueous solutions
35
Preparation of porous bioactive ceramic microspheres and in vitro osteoblastic culturing for tissue engineering application
36
Preparation of porous CaCO3/PAM composites by CO2 in water emulsion templating method
37
Preparation of porous carbon derived from mixtures of furfuryl resin and glycol with controlled pore size distribution Original Research Article
38
Preparation of porous carbon films by the pyrolysis of poly(urethane-imide) films and their pore characteristics Original Research Article
39
Preparation of porous carbon nanofibers derived from graphene oxide/polyacrylonitrile composites as electrochemical electrode materials
40
Preparation of porous carbon spheres from porous starch
41
Preparation of porous carbon-doped TiO2 film by sol–gel method and its application for the removal of gaseous toluene in the optical fiber reactor
42
Preparation of porous carbons by chemical activation of polyethyleneterephthalate
43
Preparation of porous carbons from cypress using super-heated steam. I. The carbonization furnace and its characteristics
44
Preparation of porous carbons from cypress using super-heated steam. II. Pore structure of carbonized products
45
Preparation of porous carbons from cypress using super-heated steam: III. Performance in electric double layer capacitors
46
Preparation of porous carbons from non-metallic fractions of waste printed circuit boards by chemical and physical activation
47
Preparation of porous carbons from non-metallic fractions of waste printed circuit boards by chemical and physical activation
48
Preparation of porous carbons from petroleum coke by different activation methods
49
Preparation of porous carbons from phenol–formaldehyde resins with chemical and physical activation Original Research Article
50
Preparation of porous carbons from thermoplastic precursors and their performance for electric double layer capacitors Original Research Article
51
Preparation of porous carbon–silica composite monoliths
52
Preparation of porous ceramics with controllable pore sizes in an easy and low-cost way
53
Preparation of porous ceria doped tetragonal zirconia ceramics by capsule free hot isostatic pressing
54
Preparation of porous ceria doped tetragonal zirconia ceramics by capsule free hot isostatic pressing
55
Preparation of porous chitosan/GPTMS hybrid membrane and its application in affinity sorption for tyrosinase purification with Agaricus bisporus
56
Preparation of Porous Chromia-Pillared Molybdenum Trioxide
57
Preparation of porous cobalt and nickel oxides from corresponding alkoxides using a sonochemical technique and its application as a catalyst in the oxidation of hydrocarbons
58
Preparation of porous cobalt and nickel oxides from corresponding alkoxides using a sonochemical technique and its application as a catalyst in the oxidation of hydrocarbons
59
Preparation of porous composite implant materials by in situ polymerization of porous apatite containing -caprolactone or methyl methacrylate
60
Preparation of porous Cu2O octahedron and its application as L-Tyrosine sensors
61
Preparation of porous flower-shaped SnO2 nanostructures and their gas-sensing property
62
Preparation of porous glass-ceramics under different hydrothermal hot pressing conditions
63
Preparation of porous glasses from phosphorus slag
64
Preparation of porous graphene using cuprous oxide microspheres as sacrificial templates for enriching proteins and peptides
65
Preparation of porous hydroxyapatite ceramics containing mullite by reaction sintering of clay, alumina and hydroxyapatite
66
Preparation of porous hydroxyapatite scaffolds
67
Preparation of porous hydroxyapatite scaffolds by combination of the gel-casting and polymer sponge methods
68
Preparation of porous ion-exchange membranes (IEMs) and their characterizations
69
Preparation of porous lanthanum phosphate with templates
70
Preparation of porous magnetic nanocomposites using corncob powders as template and their applications for electromagnetic wave absorption
71
Preparation of porous material from talc by mechanochemical treatment and subsequent leaching
72
Preparation of porous material from waste bottle glass by hydrothermal treatment
73
Preparation of porous materials with controlled pore size and porosity
74
Preparation of porous materials with ordered hole structure
75
Preparation of porous membrane by combined use of thermally induced phase separation and immersion precipitation
76
Preparation of porous membranes with the residues obtained by the extraction of coal
77
Preparation of porous microsphere-scaffolds by electrohydrodynamic forming and thermally induced phase separation
78
Preparation of porous monolayer film by immersing the stearic acid Langmuir–Blodgett monolayer on mica in salt solution
79
Preparation of porous nanorod polyaniline film and its high electrochemical capacitance performance
80
Preparation of porous nitrogen-doped titanium dioxide microspheres and a study of their photocatalytic, antibacterial and electrochemical activities
81
Preparation of porous paper composites with ruthenium hydroxide and catalytic alcohol oxidation in a multiphase gas–liquid–solid reaction
82
Preparation of porous particles by liquid–liquid interfacial crystallization
83
Preparation of porous PLGA/HA/collagen scaffolds with supercritical CO2 and application in osteoblast cell culture
84
Preparation of porous PMMA/Na+–montmorillonite cation-exchange membranes for cationic dye adsorption
85
Preparation of porous poly(ɛ-caprolactone) scaffolds by gas foaming process and in vitro/in vivo degradation behavior using γ-ray irradiation
86
Preparation of porous polymer membranes using nano- or micro-pillar arrays as templates
87
Preparation of porous polymer monolithic column incorporated with graphene nanosheets for solid phase microextraction and enrichment of glucocorticoids
88
Preparation of porous polymer monoliths featuring enhanced surface coverage with gold nanoparticles
89
Preparation of porous polymer samples for SEM: combination of photo oxidation degradation with a freeze fracture technique
90
Preparation of porous PVDF hollow fibre membrane via a phase inversion method using lithium perchlorate (LiClO4) as an additive
91
Preparation of porous PVDF-NiB capsules as catalytic adsorbents for hydrogen generation from sodium borohydride
92
Preparation of porous ruthenium catalysts utilizing a silsesquioxane ligand; catalytic activity towards hydroformylation of 1-octene Original Research Article
93
Preparation of porous scaffold from hydroxyapatite powders
94
Preparation of porous scaffolds by using freeze-extraction and freeze-gelation methods
95
Preparation of porous sheet composite impregnated with TiO2 photocatalyst by a papermaking technique
96
Preparation of Porous Si (100) for Overgrown Cubic Layer: Morphological Investigation
97
Preparation of porous SiC ceramic with a woodlike microstructure by sol-gel and carbothermal reduction processing
98
Preparation of porous SiC ceramics from waste cotton linter by reactive liquid Si infiltration technique
99
Preparation of porous Si-incorporated hydroxyapatite
100
Preparation of porous silica from chlorite by selective acid leaching
101
Preparation of porous silica from vermiculite by selective leaching
102
Preparation of porous SnO2 helical nanotubes and SnO2 sheets
103
Preparation of Porous SnO2 Particles Having High Specific Surface Area and High Thermal Stability via an Aqueous Solution Route and Subsequent Hydrothermal Treatment
104
Preparation of porous spherical CuI nanoparticles
105
Preparation of porous stainless steel hollow fibers by robotic fiber deposition
106
Preparation of porous starch and its use as a structure-directing agent for production of porous zinc oxide
107
Preparation of porous structure LiFePO4/C composite by template method for lithium-ion batteries
108
Preparation of porous styrenics-based monolithic layers for thin layer chromatography coupled with matrix-assisted laser-desorption/ionization time-of-flight mass spectrometric detection
109
Preparation of porous super-hydrophobic and super-oleophilic polyvinyl chloride surface with corrosion resistance property
110
Preparation of porous tin dioxide powder by ultrasonic spray pyrolysis and their application to sensor materials
111
Preparation of Porous TiO2 Cryogel Fibers through Unidirectional Freezing of Hydrogel Followed by Freeze-Drying
112
Preparation of porous TiO2/silica composites without any surfactants
113
Preparation of porous TiO2/Ti composite membrane for immunoisolation
114
Preparation of porous titania thin film and its photocatalytic activity
115
Preparation of porous titanium oxide films onto indium tin oxide for application in organic photovoltaic devices
116
Preparation of porous titanium phosphate glass-ceramics for NH3 gas adsorption with self-cleaning ability
117
Preparation of porous Y2SiO5 ceramics with relatively high compressive strength and ultra-low thermal conductivity by a TBA-based gel-casting method
118
Preparation of porous zirconia microspheres by internal gelation method
119
Preparation of porous, chemically cross-linked, PVdF-based gel polymer electrolytes for rechargeable lithium batteries
120
Preparation of porous, nano-sized urea–formaldehyde polymer powder
121
Preparation of porphyrinated polyacrylonitrile fiber mat supported TiO2 photocatalyst and its photocatalytic activities
122
Preparation of Portland cement with sugar filter mud as lime-based raw material
123
Preparation of positive LiCoO2 films by electron cyclotron resonance (ECR) plasma sputtering method and its application to all-solid-state thin-film lithium batteries
124
Preparation of POSS-based organic–inorganic hybrid mesoporous materials networks through Schiff base chemistry
125
Preparation of POSS-poly(ɛ-caprolactone)-β-cyclodextrin/Fe3O4 hybrid magnetic micelles for removal of bisphenol A from water
126
Preparation of potassium acetate intercalated metakaolinite
127
Preparation of potassium lithium niobate powders with low Li content via the Pechini method
128
Preparation of potassium tantalate niobate thin films by chemical solution deposition and their characterization
129
Preparation of potassium tantalate thin films through chemical solution deposition
130
Preparation of potential 3-deazauridine and 6-azauridine prodrugs through an enzymatic alcoholysis
131
Preparation of potential inhibitors of the mur-Pathway enzymes on solid support using an acetal linker
132
Preparation of potentially piezoelectric polymers containing multicyano functionalities and their properties
133
Preparation of PP-g-PA6 copolymers through reactive blending
134
Preparation of PPO-silica mixed matrix membranes by in-situ sol–gel method for H2/CO2 separation
135
Preparation of Pr0.35Nd0.35Sr0.3MnO3−δ/YSZ composite cathode powders for tubular solid oxide fuel cells by microwave-induced monomer gelation and gel combustion synthesis process
136
Preparation of preferred oriented LiCoO2 thin films by soft solution processing
137
Preparation of Preproinsulin Gene Construct Containing the Metallothionein2A (pBINDMTChIns) and Its Expression in NIH3T3 Cell Line and Muscle Tissue of Alloxan Diabetic Rabbits
138
Preparation of pressure-sensitive adhesives for the production of sticky foam at ambient temperature
139
Preparation of primary arylamines via arylzinc chlorides in good yields
140
PREPARATION OF PRINCIPAL FOR SCHOOL CHANGE: A COMPARATIVE STUDY BETWEEN NEPAL AND SINGAPORE
141
Preparation of processible polyaniline-formate salt via emulsifier free inverted emulsion polymerization and its antistatic applications
142
Preparation of products rich in resistant starch from maize starch by an enzymatic method
143
Preparation of products rich in slowly digestible starch (SDS) from rice starch by a dual-retrogradation treatment
144
Preparation of promoted nickel catalysts supported on mesoporous nanocrystalline gamma alumina for carbon dioxide methanation reaction
145
Preparation of Proper Culture Medium for Saccharomyces cerevisiae var. boulardii with Molasses and Animal Serum
146
Preparation of Proper Culture Medium for Saccharomyces cerevisiae var. boulardii with Molasses and Animal Serum
147
Preparation of Proper Immunogen by Cloning and Stable Expression of cDNA coding for Human Hematopoietic Stem Cell Marker CD34 in NIH-3T3 Mouse Fibroblast Cell Line
148
Preparation of prostate specific antigen standards for immunoradiometric assay
149
Preparation of Protected Nanoparticles of Bismuth Telluride by Laser Ablation in Solution
150
Preparation of protein loaded chitosan microparticles by combined precipitation and spherical agglomeration
151
Preparation of protein-adsorption-resistant polyethersulfone ultrafiltration membranes through surface segregation of amphiphilic comb copolymer
152
Preparation of protein-loaded PLGA-PVP blend nanoparticles by nanoprecipitation method: entrapment, Initial burst and drug release kinetic studies
153
Preparation of protein-loaded sustained-release microspheres via ‘solid-in-oil-in-hydrophilic oil-in-ethanol (S/O/hO/E)’ emulsification
154
Preparation of protein-loaded-PLGA microspheres by an emulsion/solvent evaporation process employing LTCC micromixers
155
Preparation of Proteolytic Enzymes from Kamchatka Crab Paralithodes camchatica Hepatopancreas and Their Application
156
Preparation of proton conducting BaCe0.8Gd0.2O3 thin films
157
Preparation of proton conducting composites by mechanical milling for phosphorus-containing solid acids
158
Preparation of proton conducting ionic glasses in the systems CsHSO4–MHSO4 (M = Na, K, Rb)
159
Preparation of proton conductive composites with cesium hydrogen sulfate and phosphosilicate gel
160
Preparation of proton conductive composites with CsHSO4/CsH2PO4 and phosphosilicate gel
161
Preparation of Proton Conductive Phosphosilicate Gels Derived from 2-(Diethoxyphosphoryl)ethyltriethoxysilane
162
Preparation of proton exchange membranes based on crosslinked polytetrafluoroethylene for fuel cell applications
163
Preparation of proton-conducting composite membranes from sulfonated poly(ether ether ketone) and polyacrylonitrile
164
Preparation of proton-conducting sulfonated poly(ether ether ketone)/boron phosphate composite membranes by an in situ sol–gel process
165
Preparation of proton-conductive organic–inorganic hybrid titanophosphite membranes
166
Preparation of protonic layered manganates and their intercalation behavior
167
Preparation of proton–β/β″-aluminas by the ion-exchange under hydrothermal conditions and their characterisation
168
Preparation of proximal β-hydroxy silyl enol ethers from α,β-epoxyketones using silyllithium reagents
169
Preparation of prussian blue nanoparticles with single precursor
170
Preparation of Prussian blue@Pt nanoparticles/carbon nanotubes composite material for efficient determination of H2O2
171
Preparation of PS/TiO2 as a white pigment for electrophoretic displays
172
Preparation of pseudo glycoamino acid and its application to glycopeptide synthesis
173
Preparation of pseudo-pure states by line-selective pulses in nuclear magnetic resonance
174
Preparation of p-substituted tetrafluoropyridyl derivatives via the tetrafluoropyridylcopper reagent
175
Preparation of psychrometric charts for water vapour in Martian atmosphere
176
Preparation of Psyllium Mucilage and Acrylic Acid Based Hydrogels and their Application in Selective Absorption of Water from Different OillWater Emulsions.
177
Preparation of Pt catalysts supported on activated carbon felts (ACF) Original Research Article
178
Preparation of Pt deposited nanotubular TiO2 as cathodes for enhanced photoelectrochemical hydrogen production using seawater electrolytes
179
Preparation of Pt nanoparticle-loaded three-dimensional Fe3O4/carbon with high electro-oxidation activity Original Research Article
180
Preparation of Pt nanoparticles on carbon nanotubes by hydrothermal method
181
Preparation of Pt nanoparticles on carbon support using modified polyol reduction for low-temperature fuel cells
182
Preparation of Pt nanoparticles on different carbonaceous structure and their applications to methanol electro-oxidation
183
Preparation of Pt(II) and Pd(II) complexes coordinated with both a diimine ligand and a sulfur-rich dithiolate ligand and electrical conductivities of their oxidized species and X-ray crystal structure of Pd(N-butyl-pyridine-2-carbaldimine)(C3S5)
184
Preparation of Pt/Al2O3-Cl Catalyst and Investigation of Operating Variables Effects on Isomerization Reaction
185
Preparation of Pt/beta zeolite–Al2O3/cordierite monolith for automobile exhaust purification
186
Preparation of Pt/C electrode with double catalyst layers by electrophoresis deposition method for PEMFC
187
Preparation of Pt/C via a polyol process – Investigation on carbon support adding sequence
188
Preparation of Pt/MgO catalysts. Influence of the precursor metal salt and solvent used
189
Preparation of Pt/multiwalled carbon nanotubes modified Au electrodes via Pt–Cu co-electrodeposition/Cu stripping protocol for high-performance electrocatalytic oxidation of methanol
190
Preparation of Pt/NiO-C electrocatalyst and heat-treatment effect on its electrocatalytic performance for methanol oxidation
191
Preparation of Pt/SO42−single bondZrO2 by incipient wetness impregnation: Influence of the sulfur concentration in the isomerization of n-butane Original Research Article
192
Preparation of Pt/TiO2 nanocomposite films using co-sputtering method
193
Preparation of Pt/zeolite–Nafion composite membranes for self-humidifying polymer electrolyte fuel cells
194
Preparation of Pt/ZSM-5 films on stainless steel microreactors
195
Preparation of Pt-Co/C electrocatalysts by reduction with borohydride in acid and alkaline media: the effect on the performance of the catalyst
196
Preparation of Pt-loaded hydrogen selective membranes for methanol reforming
197
Preparation of Pt-loaded TiO2 nanofibers by electrospinning and their application for WGS reactions Original Research Article
198
Preparation of PtRu nanoparticles on various carbon supports using surfactants and their catalytic activities for methanol electro-oxidation
199
Preparation of Pt-Ru-Ni ternary nanoparticles by microemulsion and electrocatalytic activity for methanol oxidation
200
Preparation of PtRuNi/C electrocatalysts by an alcohol-reduction process for electro-oxidation of methanol Original Research Article
201
Preparation of Ptsingle bondRe/Al2O3 catalysts by surface redox reactions II. Influence of the acid medium on Re deposition and Ptsingle bondRe interaction Original Research Article
202
Preparation of PtSn/C electrocatalysts with improved activity and durability toward oxygen reduction reaction by alcohol-reduction process
203
Preparation of Pt–Sn/graphene catalysts and their activities for ethanol electrooxidation in polyol synthesis
204
Preparation of PtSnO2/C electrocatalysts using electron beam irradiation
205
Preparation of Pt–TiO2 composite particles by alcohol reduction method and their photocatalytic activities Original Research Article
206
Preparation of p-type CdS thin films and in situ dark conductivity in vacuum deposited CdS:Cu films
207
Preparation of p-type conductive transparent CuCrO2:Mg thin films by chemical solution deposition with two-step annealing
208
Preparation of p-type ZnO film on the GaAs substrate by thermal annealing treatment
209
Preparation of p-type ZnO films with (N,Ga) co-doping by MOVPE
210
Preparation of Pt-ZSM-5 zeolite membrane catalysts for the isomerization of linear alkane
211
Preparation of PtReAl2O3 catalysts by surface redox reactions I. Influence of operating variables on Re deposit in the presence of hydrochloric acid Original Resea
212
Preparation of PtReAl2O3 catalysts by surface redox reactions II. Influence of the acid medium on Re deposition and PtRe interaction Original Research Article
213
Preparation of Pu-doped fluorapatite
214
Preparation of pulse plated GaAs films Original Research Article
215
Preparation of Pure A12O3 and Alumina Doped with Oxides of Magnesium, Chromium and Manganese by Hydrothermal Oxidation of Aluminium Metal
216
Preparation of Pure A12O3 and Alumina Doped with Oxides of Magnesium, Chromium and Manganese by Hydrothermal Oxidation of Aluminium Metal
217
Preparation of pure boron coating film and its characterization by XPS and TDS
218
Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles
219
Preparation of pure hydrogen peroxide and anhydrous peroxide solutions from crystalline serine perhydrate
220
Preparation of pure vaterite by simple mechanical mixing of two aqueous salt solutions
221
Preparation of purified acylglycerols of eicosapentaenoic acid and docosahexaenoic acid and their re-esterification with conjugated linoleic acid
222
Preparation of PVA membrane for immobilization of GOD for glucose biosensor
223
Preparation of PVA/chitosan lipase membrane reactor and its application in synthesis of monoglyceride
224
Preparation of PVA/paraffin thermal regulating fiber by in situ microencapsulation
225
Preparation of PVA-GA-CS/PVA-Fe-SA bipolar membrane and its application in electro-generation of 2,2-dimethyl-3-hydroxypropionic acid
226
Preparation of PVC pitch from waste pipe
227
Preparation of PVC/DPF Composite Films Filled Copper Loading: Characterization of Material and Investigation of its Stability Towards Natural Weathering
228
Preparation of PVDF based blend microporous membranes for lithium ion batteries by thermally induced phase separation: I. Effect of PMMA on the membrane formation process and the properties
229
Preparation of PVdF nanofiber membranes by electrospinning and their use as secondary battery separators
230
Preparation of PVDF/PEO-PPO-PEO blend microporous membranes for lithium ion batteries via thermally induced phase separation process
231
Preparation of PVdF/PSSA composite membranes using supercritical carbon dioxide for direct methanol fuel cells
232
Preparation of PVDF/PVP core–shell nanofibers mats via homogeneous electrospinning
233
Preparation of PVDF-based polymer inclusion membrane using ionic liquid plasticizer and Cyphos IL 104 carrier for Cr(VI) transport
234
Preparation of PVDF–HFP microporous membrane for Li-ion batteries by phase inversion
235
Preparation of PVP immobilized microporous chlorinated polyvinyl chloride membranes on fabric and their hydraulic permeation behavior
236
Preparation of PVP–PVA–exfoliated graphite cross-linked composite hydrogels for the incorporation of small tin nanoparticles
237
Preparation of pyrazole compounds for attachment to chelating resins
238
Preparation of pyrazoline nanoparticles with a membrane mixer
239
Preparation of pyrenebutyric acid bonded silica stationary phases for the application to the separation of fullerenes
240
Preparation of pyrenebutyric acid-modified magnesia–zirconia stationary phases using phosphonate as spacers and their application to the separation of fullerenes Original Research Article
241
Preparation of pyrene-functionalized fluorescent film with a benzene ring in spacer and sensitive detection to picric acid in aqueous phase
242
Preparation of pyridinyl aryl methanol derivatives by enantioselective hydrogenation of ketones using chiral Ru(diphosphine)(diamine) complexes. Attribution of their absolute configuration by 1H NMR spectroscopy using Mosherʹs reagent
243
Preparation of pyrimidin-2-one derivatives via base-mediated decomposition of uracil-analogues Fischer carbene complex
244
Preparation of pyrochlore-free PMN powder by semi-wet chemical route
245
Preparation of pyrrolidine and isoxazolidine benzamidines as potent inhibitors of coagulation factor Xa
246
Preparation of pyrrolidine–oxazoline containing ligands and their application in asymmetric transfer hydrogenation
247
Preparation of pyrrolin-2-ones and 4,5-dihydrodipyrrin-1-ones by oxidation of α-formylpyrroles and α-formyldipyrromethanes with hydrogen peroxide
248
Preparation of PZN–PT–BT ferroelectric ceramics by modified two-step method
249
Preparation of PZT discs for use in an acoustic wave sensor
250
Preparation of PZT powders and ceramics via a hybrid method of sol–gel and ultrasonic atomization
251
Preparation of PZT suspensions for direct ink jet printing
252
Preparation of PZT thick films by one-step firing sol-gel process
253
Preparation of PZT-based piezoceramics with transgranular fracture mode
254
Preparation of Q-state particles in Langmuir-Blodgett films
255
Preparation of Q-state particles in Langmuir–Blodgett films
256
Preparation of quality control materials for the determination of mercury in rice
257
Preparation of Quantum Dot-Biotin Conjugates and Their Use in Immunochromatography Assays
258
Preparation of quasicrystalline thin films and fine particles by gas evaporation
259
Preparation of quasicrystalline thin films and fine particles by gas evaporation
260
Preparation of quasi-monodispersed CdxZn1−xS nanocrystals and their optical properties
261
Preparation of quaternized poly(vinylidene fluoride) membrane by surface photografting and its antifouling performance for alkaline proteins Original Research Article
262
Preparation of quinolines from resin-bound esters using titanium reagents
263
Preparation of quinoxalines, dihydropyrazines, pyrazines and piperazines using tandem oxidation processes
264
Preparation of Radioactive Gold Nanoparticle by Neutron Activation
265
Preparation of radioactive targets for tandem accelerator experiments by high vacuum evaporation–condensation
266
Preparation of radioactive targets for tandem accelerator experiments by high vacuum evaporation–condensation
267
Preparation of radiochemically pore-filled polymer electrolyte membranes for direct methanol fuel cells
268
Preparation of rare earth metal ion/TiO2Hal-conducting polymers by ions imprinting technique and its photodegradation property on tetracycline
269
Preparation of rare earth-doped ZnO hierarchical micro/nanospheres and their enhanced photocatalytic activity under visible light irradiation
270
Preparation of RCM substrates for azepinoindole synthesis: reductive amination versus tetrahydro-γ-carboline formation
271
Preparation of reaction bonded silicon carbide (RBSC) using boron carbide as an alternative source of carbon
272
Preparation of reaction-bonded silicon carbide with well controlled structure by tape casting method
273
Preparation of Reactive and Thermal Stable Hyperbranched Graft Copolymers/ Clay Nanocomposite via ‘Living’ Free Radical Polymerization
274
Preparation of reactive Sr-celsian powders by solid-state reaction and their sintering
275
Preparation of reactive surfaces by electrografting
276
Preparation of reactively sputtered Sb-doped SnO2 thin films: Structural, electrical and optical properties
277
PREPARATION OF READY-TO-SERVE (RTS) BEVERAGE FROM PALMYRAH (Borassus flabellifer L.) FRUIT PULP
278
Preparation of reagents for the determination of fumonisin B1 by flow-injection immunoanalysis Original Research Article
279
Preparation of rechargeable biocidal polypropylene by reactive extrusion with diallylamino triazine
280
Preparation of recoverable Ru catalysts for liquid-phase oxidation and hydrogenation reactions Original Research Article
281
Preparation of recycled poly s tyrene derivatives to remove heavy metal ions from contaminated water
282
Preparation of recycle-typed Fe3Al alloy and its application for cutting tool materials
283
Preparation of red nitride phosphor from powder mixture of metal nitrides using spark plasma sintering
284
Preparation of red-emitting phosphor (Y,Gd)BO3:Eu3+ by high temperature ball milling
285
Preparation of redispersible dry emulsion using Eudragit E100 as both solid carrier and unique emulsifier
286
Preparation of reduced graphene oxide/cobalt oxide composites and their enhanced capacitive behaviors by homogeneous incorporation of reduced graphene oxide sheets in cobalt oxide matrix
287
Preparation of reduced graphene oxide/gelatin composite films with reinforced mechanical strength
288
Preparation of reduction-triggered degradable microcapsules for intracellular delivery of anti-cancer drug and gene
289
Preparation of reductive polypeptides from fresh placentas of dairy cows
290
Preparation of REFeAsO1−xFx (RE=Sm and Gd) superconductors at a relatively low temperature Original Research Article
291
Preparation of REFeCo alloy target materials for magneto-optical recording media
292
Preparation of REFeCo alloy target materials for magneto-optical recording media
293
Preparation of reference materials for rice kernels
294
Preparation of reflective and electrically conductive surface-silvered polyimide films from silver(I) complex and PMDA/ODA via an in situ single-stage technique
295
Preparation of reflective CsI photocathodes with reproducible high quantum efficiency
296
Preparation of regenerated cellulose/montmorillonite nanocomposite films via ionic liquids
297
Preparation of regioprotected morins by lipase-catalysed transesterification
298
Preparation of regioselectively feruloylated p-nitrophenyl α-l-arabinofuranosides and β-d-xylopyranosides—convenient substrates for study of feruloyl esterase specificity Original Research Article
299
Preparation of reproducible glassy carbon electrodes by removal of polishing impurities
300
Preparation of resin-bound alkynyl iodonium salts and their application in organic synthesis as alkynyl transfer reagents
301
Preparation of resistant starch by hydrolysis of maize starch with pullulanase
302
Preparation of resistant starch from starch–guar gum extrudates and their properties
303
Preparation of resorcinol formaldehyde (RF) carbon gels: Use of ultrasonic irradiation followed by microwave drying
304
Preparation of resorcinol–formaldehyde carbon cryogel microhoneycombs
305
Preparation of resveratrol-enriched grape juice from ultrasonication treated grape fruits
306
Preparation of resveratrol-enriched grape juice from ultrasonication treated grape fruits
307
Preparation of Reversible Thermochromic Ink for Flexography Printing on Paper and Study its Colorimetric Properties
308
Preparation of reversibly immobilized lysozyme onto Procion Green H-E4BD-attached poly(hydroxyethylmethacrylate) film for hydrolysis of bacterial cells
309
Preparation of reversibly photo-cross-linked nanogels from pH-responsive block copolymers and use as nanoreactors for the synthesis of gold nanoparticles
310
Preparation of RF organic aerogels and carbon aerogels by alcoholic sol–gel process
311
Preparation of rhenium hydride complexes with pyrazole and pyrazolato ligands
312
Preparation of rhenium-188–tin colloid as a radiation synovectomy agent and comparison with rhenium-188–sulfur colloid
313
Preparation of ribavirin analogues by copper- and ruthenium-catalyzed azide-alkyne 1,3-dipolar cycloaddition
314
Preparation of Rice Based ORS by Solution Method
315
Preparation of rifampicin/lactose microparticle composites by a supercritical antisolvent-drug excipient mixing technique for inhalation delivery
316
Preparation of rodlike t-ZrO2 nanoparticles by two-step calcination of 1,12-diaminododecane–zirconia mesostructured composites
317
Preparation of room temperature ionic liquids based on aliphatic onium cations and asymmetric amide anions and their electrochemical properties as a lithium battery electrolyte
318
Preparation of room temperature NO2 gas sensors based on W- and V-modified mesoporous MCM-41 thin films employing surface photovoltage technique
319
Preparation of Ru Nanoparticles Supported on γ-Al2O3 and Its Novel Catalytic Activity for Ammonia Synthesis
320
Preparation of Ru(η3-2-alkenylallyl)(CO)Cl(PPh3)2 complexes via carbometallation of allenes with alkenyl ruthenium complexes
321
Preparation of Ru–Cs catalyst and its application on hydrogen production by ammonia decomposition
322
Preparation of Ru-loaded CdS/Al-HMS nanocomposites and production of hydrogen by photocatalytic degradation of formic acid
323
Preparation of RuO2–YSZ nano-composite films by MOCVD
324
Preparation of ruthenium silanethiolato complexes and their reactions with sulfur dioxide; possible models for the activation of SO2 in the homogeneously catalyzed Claus reaction
325
Preparation of ruthenium(II) chloride complexes of polybasic amines
326
Preparation of ruthenium-loaded CNT–TiO2 nanohybrids and their catalytic performance for the selective oxidation of benzyl alcohol
327
Preparation of rutile (TiO2) nanostructured materials at low temperature from TiCl4 aqueous solution
328
Preparation of rutile titania nanocrystals by liquid method at room temperature
329
Preparation of S, C cation-codoped SrTiO3 and its photocatalytic activity under visible light Original Research Article
330
Preparation of samarium oxide nanoparticles and its catalytic activity on the esterification
331
Preparation of same acceleration maps for use in the improvement of structures in Sabzevar city
332
Preparation of sandwich-like self-assembled n-octanethiol film containing doped silver nanoparticles on silicon wafer and evaluation of its tribological properties
333
Preparation of Saussurea costus Traditional Oil and Investigation of Different Parameters for Standardization
334
Preparation of Sb3Nb3O13 powders using molten salt method
335
Preparation of SBA-15-PAMAM as a Nano Adsorbent for Removal of Acid Red 266 from Aqueous Media: Batch Adsorption and Equilibrium Studies
336
Preparation of Sb-doped ZnO nanostructures and studies on some of their properties
337
Preparation of SBF with different content and its influence on the composition of biomimetic apatites
338
Preparation of scale-like nickel cobaltite nanosheets assembled on nitrogen-doped reduced graphene oxide for high-performance supercapacitors
339
Preparation of Schiff Bases Derived from Chitosan and Investigate their Photostability and Thermal Stability
340
Preparation of scrap tire rubber fiber–silica fume mixtures for modification of clayey soils
341
Preparation of scrolled graphene oxides with multi-walled carbon nanotube templates Original Research Article
342
Preparation of SDC electrolyte thin films on dense and porous substrates by modified sol–gel route
343
Preparation of S-doped TiO2 photocatalysts and their photocatalytic activities under visible light Original Research Article
344
Preparation of Se-doped polyaniline emeraldine base films
345
Preparation of segmented, high molecular weight, aliphatic poly(ether-urea) copolymers in isopropanol. In-situ FTIR studies and polymer synthesis
346
Preparation of selective absorbers based on CuMn spinels by dip-coating method
347
Preparation of selective catalytic reduction catalysts via milling and thermal spreading Original Research Article
348
Preparation of selective surfaces and determination of optimum thickness for maximum selectivity
349
Preparation of selective surfaces of black cobalt by the sol-gel process
350
Preparation of selenium yeasts I. Preparation of selenium-enriched Saccharomyces cerevisiae
351
Preparation of Selenium-Doped Activated Carbon and its Utilization for Improving the Quality of USed Coconut Oil
352
Preparation of selenoanhydro- and telluroanhydroglycofuranosides and some corresponding nucleosides Original Research Article
353
Preparation of self-assembled cobalt nanocrystal arrays
354
Preparation of self-assembled monolayers with specific intermolecular interactions
355
Preparation of self-bursting microcapsules by interfacial polymerization
356
Preparation of self-lubricating composite coatings through a micro-arc plasma oxidation with graphite in electrolyte solution
357
Preparation of self-organized porous anodic niobium oxide microcones and their surface wettability Original Research Article
358
Preparation of self-organized porous tungsten oxide using HFCVD technique
359
Preparation of self-reinforcement of porous mullite ceramics through in situ synthesis of mullite whisker in flyash body
360
Preparation of self-supported dual-phase oxygen permeation membranes via chemical etching method
361
Preparation of self-supporting boron targets
362
Preparation of self-supporting boron targets
363
Preparation of self-supporting carbon thin films
364
Preparation of self-supporting carbon thin films
365
Preparation of self-supporting diamond-like carbon nanofoils with thickness less than 5 nm for laser-driven ion acceleration
366
Preparation of self-supporting diamond-like carbon nanofoils with thickness less than 5 nm for laser-driven ion acceleration
367
Preparation of self-supporting mesostructured silica thin film membranes as gateable interconnects for microfluidics
368
Preparation of self-supporting NaA zeolite membranes using geopolymers
369
Preparation of self-supporting nickel targets from 58Ni, 60Ni and 61Ni
370
Preparation of self-supporting nickel targets from 58Ni, 60Ni and 61Ni
371
Preparation of self-supporting targets with thickness <100 μg/cm2
372
Preparation of self-supporting targets with thickness <100 μg/cm2
373
Preparation of Semi-aromatic polyamide(PA)/multi-wall carbon nanotube (MWCNT) composites and its dynamic mechanical properties
374
Preparation of semi-interpenetrating polymer networks with adjustable mesh width and hydrophobicity
375
Preparation of SERS-active substrates using thermal inkjet technology
376
Preparation of sesame peptide and evaluation of antibacterial activity on typical pathogens
377
Preparation of seven- and eight-membered rings by carbon–carbon bond formation induced by samarium diiodide: 7-endo- and 8-endo-trig type cyclization to bicyclo[5.3.0]decanolone, bicyclo[5.4.0]undecanolone, and bicyclo[6.4.0]dodecanolone
378
Preparation of sewage sludge based activated carbon by using Fenton’s reagent and their use in 2-Naphthol adsorption
379
Preparation of shape-controlled CeO2 nanocrystals via microwave-assisted method
380
Preparation of shaped magnesium oxide/carbon catalysts using rice grains as an exotemplate and carbon precursor Original Research Article
381
Preparation of shape-stabilized co-crystallized poly (ethylene glycol) composites as thermal energy storage materials
382
Preparation of sharp gold tips for STM by using electrochemical etching method
383
Preparation of sheet polypyrrole with vertical anisotropy: A self-organized bending-beam actuator
384
Preparation of sheet-like electrolytes from poly(2-acrylamido-2-methyl-1-propanesulfonic acid)-deposited phenylsilsesquioxane particles
385
Preparation of short and water-dispersible carbon nanotubes by solid-state cutting Original Research Article
386
Preparation of short carbon nanotubes by mechanical ball milling and their hydrogen adsorption behavior Original Research Article
387
Preparation of Si powder thick films by low frequency alternating electrophoretic deposition
388
Preparation of Si/O/C nanotubes using Ge nanowires as template
389
Preparation of Si/O/C nanotubes using Ge nanowires as template
390
Preparation of Si3N4 ceramic foams by simultaneously using egg white protein and fish collagen
391
Preparation of Si3N4 ceramics with high strength and high reliability via a processing strategy
392
Preparation of sialon–transition metal silicide composites
393
Preparation of SiC and Si3N4 whiskers using bean-curd refuse as the Si source
394
Preparation of SiC and Si3N4 whiskers using bean-curd refuse as the Si source
395
Preparation of SiC ceramics by aqueous gelcasting and pressureless sintering
396
Preparation of SiC fiber-reinforced SiC composites
397
Preparation of SiC nanowires with fins by chemical vapor deposition
398
Preparation of SiC nanowires-filled cellular SiCO ceramics from polymeric precursor
399
Preparation of SiC reinforced Ti3SiC2-base composite and its biocompatibility evaluation
400
Preparation of SiC/Si3N4 composites with rod-like microstructure by combustion synthesis
401
Preparation of SiCf/SiC composites by the slip infiltration and transient eutectoid (SITE) process
402
Preparation of Si–C–H thin films embedded with high oriented (100) polycrystalline silicon
403
Preparation of Si–C–N–Fe magnetic ceramic derived from iron-modified polysilazane
404
Preparation of Si–C–O–N ceramic fibers from polycarbosilane
405
Preparation of SiC–SiO2–CuO composites
406
Preparation of Si–diamond–SiC composites by in-situ reactive sintering and their thermal properties
407
Preparation of sila-functional 3-sila-1-thiacyclohexanes
408
Preparation of silage from Spanish mackerel (Scomberomorus maculatus) and its evaluation in broiler diets
409
Preparation of silane modified SiO2 abrasive particles and their Chemical Mechanical Polishing (CMP) performances
410
Preparation of silane precursor microencapsulated intumescent flame retardant and its enhancement on the properties of ethylene–vinyl acetate copolymer cable
411
Preparation of silane-grafted pellets: silica bound reagents in a very convenient form
412
Preparation of silanethiols by reaction of silanes with triphenylphosphine sulfide and with alkanethiols
413
Preparation of silica aerogel from oil shale ash by fluidized bed drying
414
Preparation of silica aerogel from rice hull ash by drying at atmospheric pressure
415
Preparation of silica aerogel from rice hull ash by supercritical carbon dioxide drying
416
Preparation of silica- and carbon-supported cobalt by electrostatic adsorption of Co(III) hexaammines
417
Preparation of silica and TiO2–SiO2 core–shell nanoparticles in water-in-oil microemulsion using compressed CO2 as reactant and antisolvent
418
Preparation of silica and titanium-containing silica hollow spheres at supercritical CO2/H2O interface
419
Preparation of silica coated iron oxide nanoparticles using non-transferred arc plasma
420
Preparation of silica encapsulated carbon black with high thermal stability
421
Preparation of silica encapsulated CdSe quantum dots in aqueous solution with the improved optical properties
422
Preparation of silica fibers and non-woven cloth by electrospinning
423
Preparation of silica gels in electrostatic field
424
Preparation of silica microrods with nano-sized pores in ionic liquid microemulsions
425
Preparation of silica microspheres coated with V2O5 xerogel and V2O5/WO3 composite xerogel via adapted Stِber process
426
Preparation of silica nanoparticles from semi-burned rice straw ash
427
Preparation of silica nanoparticles: determination of the optimal synthesis conditions for small and uniform particles
428
Preparation of silica nanowires using porous silicon as Si source
429
Preparation of silica particles doped with uniformly dispersed copper oxide nano-clusters
430
Preparation of silica powder with high whiteness from palygorskite
431
Preparation of silica xerogel with high silanol content from sodium silicate and its application as CO2 adsorbent
432
Preparation of silica-alumina catalyst by the sol-gel method and its activity for the Diels-Alder reaction of isoprene and acrylaldehyde Original Research Article
433
Preparation of Silica-Coated Magnetite Nanoparticles with Thiophosphoramide for Removal of Heavy Metals from Aqueous Solutions
434
Preparation of Silica-Coated Rhodium Nanoparticles Using Water-in-Oil Microemulsion
435
Preparation of Silicagel-MnO2 Nanocomposite Adsorbent for Malachite Green Removal
436
Preparation of silica-layered multi-walled carbon nanotubes activated by grafting of poly(4-vinylpyridine)
437
Preparation of Silicalite Membranes on Stainless Steel Grid Supports
438
Preparation of silicalite-1 membrane by solution-filling method and its alcohol extraction properties
439
Preparation of silicalite-1 membranes on stainless steel supports by a two-stage varying-temperature in situ synthesis
440
Preparation of Silicalite-1 Micromembranes on LaserPerforated Stainless Steel Sheets
441
Preparation of silica-magnetite nanoparticle mixed hemimicelle sorbents for extraction of several typical phenolic compounds from environmental water samples
442
Preparation of silica-modified TiO2 and application to dye-sensitized solar cells
443
Preparation of silica–PS composite particles and their application in PET
444
Preparation of silica–silver heterogeneous nanocomposite particles by one-pot preparation strategy using polyol process: Size-controlled immobilization of silver nanoparticles
445
Preparation of silica-supported porous sorbent for heavy metal ions removal in wastewater treatment by organic–inorganic hybridization combined with sucrose and polyethylene glycol imprinting Original Research Article
446
Preparation of silica-sustained electrospun polyvinylpyrrolidone fibers with uniform mesopores via oxidative removal of template molecules by H2O2 treatment
447
Preparation of silicate foams using HSi(OC2H5)3 and their NOx adsorption behavior
448
Preparation of silicate tungsten bronzes on aluminum by plasma electrolytic oxidation process in 12-tungstosilicic acid
449
Preparation of silicon carbide nanowires via a rapid heating process
450
Preparation of silicon carbide nitride thin ®lms by sputtering of silicon nitride target
451
Preparation of silicon carbide reticulated porous ceramics
452
Preparation of silicon carbide reticulated porous ceramics
453
Preparation of silicon carbide SiC-based nanopowders by the aerosol-assisted synthesis and the DC thermal plasma synthesis methods
454
Preparation of Silicon Carbide with High Properties
455
Preparation of silicon carbide–silicon nitride composite foams from pre-ceramic polymers
456
Preparation of silicon nanoaggregates by thermal activated reaction
457
Preparation of silicon nanoparticles for device of photoluminescence
458
Preparation of silicon nanowires by in situ doping and their electrical properties
459
Preparation of silicon nitride powder from silica and ammonia
460
Preparation of silicon oxycarbide films by laser ablation of SiO/3C–SiC multicomponent targets
461
Preparation of silicon thin films by intense pulsed ion-beam evaporation method with low temperature process
462
Preparation of silicon-based oxide layer on high-crystalline SiC fiber as an interphase in SiC/SiC composites
463
Preparation of silk fibroin-supported Pd(0) catalyst for chemoselective hydrogenation: reduction of palladium(II) acetate by methanol on the protein
464
Preparation of siloxacyclopentene containing 1,3-dienes and their Diels–Alder reactions
465
Preparation of silver behenate coatings to provide low- to mid-angle diffraction calibration
466
Preparation of silver colloid and enhancement of dispersion stability in organic solvent
467
Preparation of Silver Dendritic Nanoparticles Using Sodium Polyacrylate in Aqueous Solution
468
Preparation of silver dispersed PbTiO3 film by sol-gel method
469
Preparation of silver hexacyanoferrate nanoparticles and its application for the simultaneous determination of ascorbic acid, dopamine and uric acid
470
Preparation of silver hollow nanostructures by plasmon-driven transformation
471
Preparation of Silver Immobilised TiO2-Hectorite for Phenol Removal and Eschericia coli Desinfection
472
Preparation of silver nanoparticle containing silica micro beads and investigation of their antibacterial activity
473
Preparation of silver nanoparticle-containing semi-interpenetrating network hydrogels composed of pluronic and poly(acrylamide) with antibacterial property
474
Preparation of silver nanoparticles by chemical reduction method
475
Preparation of silver nanoparticles by laser ablation in polyvinylpyrrolidone solutions
476
Preparation of silver nanoparticles by laser ablation in solution: influence of laser wavelength on particle size
477
Preparation of silver nanoparticles from silver(I) nano-coordination polymer
478
Preparation of silver nanoparticles in hexagonal phase formed by nonionic Triton X-100 surfactant
479
Preparation of silver nanoparticles in inorganic clay suspensions
480
Preparation of silver nanoparticles in soda-lime silica glass by an electrochemical procedure
481
Preparation of silver nanoparticles in the presence of chitosan by electrochemical method
482
Preparation of silver nanoparticles on ITO surfaces by a double-pulse method
483
Preparation of silver nanoparticles on the surface of fine magnetite particles by a chemical reduction
484
Preparation of silver nanoparticles templated from amphiphilic block copolymer-based hexagonal liquid crystals
485
Preparation of silver nanoparticles using chitosan suspensions
486
Preparation of silver nanoparticles using the SPG membrane emulsification technique
487
Preparation of silver nanoparticles using tryptophan and its formation mechanism
488
Preparation of Silver Nanoparticles via Reduction of a Highly CO2-Soluble Hydrocarbon-Based Metal Precursor
489
Preparation of silver nanopatterns on DNA templates
490
Preparation of silver nanopowder by thermal plasma
491
Preparation of Silver Nanorods by Rapid Microwave Heating
492
Preparation of silver nanorods through the control of temperature and pH of reaction medium
493
Preparation of silver nanostructure from silver(I) coordination polymer and fabrication of nano silver(I) bromide by reverse micelles technique
494
Preparation of silver nanostructures from a new benzopyrazine silver(I) nitrate coordination polymer
495
Preparation of silver particles and its application for surface enhanced Raman scattering with near-infrared excitation
496
Preparation of silver powders in micron size from used photographic films via leaching–cementation technique
497
Preparation of silver quantum dots embedded water-soluble silica/PAAc hybrid nanoparticles and their bactericidal activity
498
Preparation of silver, gold and silver–gold bimetallic nanoparticles in w/o microemulsion containing TritonX-100
499
Preparation of silver/hydroxyapatite nanocomposite spheres
500
Preparation of silver-coated copper powder and its oxidation resistance research
501
Preparation of silver-containing starch nanocomposite prepared from green synthesis with green tea plant extract and investigation of dye degradation and antibacterial activity
502
Preparation of silver-containing starch nanocomposite prepared from green synthesis with green tea plant extract and investigation of dye degradation and antibacterial activity
503
Preparation of silybin and isosilybin sulfates by sulfotransferase from Desulfitobacterium hafniense
504
Preparation of silybin phase II metabolites: Streptomyces catalyzed glucuronidation
505
Preparation of silyl enol ethers from acyloin derivatives using silyllithium reagents
506
Preparation of Silyl Esters by ZnCl2-Catalyzed Dehydrogenative Cross-Coupling of Carboxylic Acids and Silanes
507
Preparation of silyl polyenol ethers by carbonyl olefination of silyl esters
508
Preparation of silylated magadiite thin-film-containing covalently attached pyrene chromophores
509
Preparation of silylated α-zirconium phosphate and its thermal behavior
510
Preparation of single conjugated polymer nanofibers with high opto-electric response
511
Preparation of single crystalline NaSr2Nb5O15 particles with acicular morphology
512
Preparation of single crystalline regions in amorphous silicon layers on glass by Arq laser irradiation
513
Preparation of single crystalline Sr0.5Ba0.5Nb2O6 particles
514
Preparation of single or double-network chitosan/poly(vinyl alcohol) gel films through selectively cross-linking method
515
Preparation of single or double-network chitosan/poly(vinyl alcohol) gel films through selectively cross-linking method
516
Preparation of single phase nano-sized β-SiAlON powders by nitridation of silica–alumina gel in ammonia
517
Preparation of single-crystal copper ferrite nanorods and nanodisks
518
Preparation of single-crystalline LiNi0.5Mn0.5O2 nanosheets as cathodes for highly reversible lithium-ion batteries
519
Preparation of single-enantiomer 2-methyl-4-heptanol, a pheromone of Metamasius hemipterus, using (S)-2-methoxy-2-(1-naphthyl)propionic acid
520
Preparation of single-hole silica hollow microspheres by precipitation-phase separation method
521
Preparation of single-molecule particles of water-soluble polymers
522
Preparation of single-phase magnesium silicon nitride powder by a two-step process
523
Preparation of SiNx film by pulsed laser ablation in nitrogen gas ambient
524
Preparation of SiO2 coated Ce2S3 red pigment with improved thermal stability
525
Preparation of SiO2/ZrO2 ceramic nanocomposite coating on Aluminum alloys as metallic part of the photovoltaic cells and study its corrosion behavior.
526
Preparation of SiO2–SiC composites with a precursor method
527
Preparation of SiOxNy films by reactive KrF laser ablation
528
Preparation of Site-Specific Antibodies to Acetylated Histones
529
Preparation of size and habit-controlled nano crystallites of tungsten oxide
530
Preparation of size-controlled bovine serum albumin (BSA) nanoparticles by a modified desolvation method
531
Preparation of size-controlled cross-linked fluoroalkyl end-capped oligomer/gold nanocomposites
532
Preparation of size-controlled fine Al particles for application to rear electrode of Si solar cells
533
Preparation of size-controlled tungsten oxide nanoparticles and evaluation of their adsorption performance
534
Preparation of skinless polymer foam with supercritical carbon dioxide and its application to a photoinduced hydrogen evolution system
535
Preparation of SLN-containing Thermoresponsive In-situ Forming Gel as a Controlled Nanoparticle Delivery System and Investigating its Rheological, Thermal and Erosion Behavior
536
Preparation of sludge derived magnetic porous carbon and their application in Fenton-like degradation of 1-diazo-2-naphthol-4-sulfonic acid
537
Preparation of sludge-based activated carbon made from paper mill sewage sludge by steam activation for dye wastewater treatment Original Research Article
538
Preparation of Sm0.2Ce0.8O1.9 membranes on porous substrates by a slurry spin coating method and its application in IT-SOFC
539
Preparation of Sm3H7 nanoparticles and their application in ammonia synthesis
540
Preparation of small diameter vascular grafts by electrospinning of biodegradable/bioerodible polymers
541
Preparation of smart paper part I—formation of nylon microcapsules on paper surface using interfacial polymerization
542
Preparation of Sm-doped ceria (SDC) nanowires and tubes by gas–liquid co-precipitation at room temperature
543
Preparation of Sm-loaded brookite TiO2 photocatalysts
544
Preparation of smooth and dense composite films consisting of MEHPPV and neat C60 by means of electrophoretic deposition
545
Preparation of smooth potassium hexatitanate nanofilms by sol–gel method
546
Preparation of smooth siloxane surfaces for AFM visualization of immobilized biomolecules
547
Preparation of SmxCe1 − xO2(SDC) electrolyte film with gradient structure via a gas-phase controlling convection–diffusion approach on porous substrate
548
Preparation of Sn films deposited on carbon nanotubes
549
Preparation of Sn–Co alloy electrode for lithium ion batteries by pulse electrodeposition
550
Preparation of Sn-modified silica-coated Pt catalysts: A new Ptsingle bondSn bimetallic model catalyst for selective hydrogenation of crotonaldehyde
551
Preparation of SnO2 hollow nanospheres by a solvothermal method
552
Preparation of sodium alginate–methylcellulose blend microspheres for controlled release of nifedipine
553
Preparation of sodium aluminate from the leach liquor of diasporic bauxite in concentrated NaOH solution
554
Preparation of SOFC anode composites by spray pyrolysis
555
Preparation of soft solder joints
556
Preparation of soft-agglomerated nano-sized ceramic powders by sol–gel combustion process
557
Preparation of solar grade silicon from optical fibers wastes with thermal plasmas
558
Preparation of sol–gel polyethylene glycol–polydimethylsiloxane–poly(vinyl alcohol)-coated sorptive bar for the determination of organic sulfur compounds in water
559
Preparation of sol-gel sulfated ZrO2single bondSiO2 and characterization of its surface acidity Original Research Article
560
Preparation of sol–gel TiO2/purified Na-bentonite composites and their photovoltaic application for natural dye-sensitized solar cells
561
Preparation of solid acid catalyst from glucose–starch mixture for biodiesel production
562
Preparation of solid acid catalyst packing AAO/SBA-15-SO3H and application for dehydration of xylose to furfural
563
Preparation of solid carbon spheres by pyrolysis of allyl COPNA-BMI resin
564
Preparation of solid carbon spheres by pyrolysis of allyl COPNA-BMI resin
565
Preparation of solid contact potentiometric sensors with self-plasticizing triblock polymer and ionic liquid-polymer composites
566
Preparation of solid lipid particles by membrane emulsification—Influence of process parameters
567
Preparation of solid nickel nanoparticles by large-scale spray pyrolysis of Ni(NO3)2·6H2O precursor: Effect of temperature and nickel acetate on the particle morphology
568
Preparation of Solid Phase Microextraction (SPME) Probes through Polyaniline Multiwalled Carbon Nanotubes (PANI/MWCNTs) Coating for the Extraction of Palmitic Acid and Oleic Acid in Organic Solvents
569
Preparation of solid self-emulsifying drug delivery systems using magnesium aluminometasilicates and fluid-bed coating process
570
Preparation of Solid Superacid SO42-/ZnO-TiO2 and Its Action on Synthesis of Dimethyl Carbonate from Urea and Methanol
571
Preparation of solid water-equivalent radioactive standards
572
Preparation of solid-phase microextraction fiber coated with single-walled carbon nanotubes by electrophoretic deposition and its application in extracting phenols from aqueous samples
573
Preparation of solid-phase microextraction fibers by in-mold coating strategy for derivatization analysis of 24-epibrassinolide in pollen samples
574
Preparation of solid-state composite electrolytes based on organic/inorganic hybrid star-shaped polymer and PEG-functionalized POSS for all-solid-state lithium battery applications
575
Preparation of solid-state samples of a transition metal coordination compound for synchrotron radiation photoemission studies
576
Preparation of soluble and insoluble polymer supported IBX reagents
577
Preparation of soluble functional polymers by modification of nanosized polyacetylene
578
Preparation of soluble N and o-alkylated polyanilines using a chemical biphasic process
579
Preparation of soluble polyimide–silver nanocomposites by a convenient ultraviolet irradiation technique
580
Preparation of solvent stable polyphenylsulfone hollow fiber nanofiltration membranes
581
Preparation of solvent-resistant anion-exchange membranes
582
Preparation of Some 1,2,4-Triazol Schiff Bases as Urease Inhibitors and Study Their Effect on Proteus Mirabilis Bacteria
583
Preparation of some angularly substituted and highly functionalized quinolizidines as building blocks for the synthesis of various alkaloids and related scaffolds of medicinal interest
584
Preparation of some azo compounds by diazotization and coupling of 2- amino -5 – thiol -1,3,4- thiadizaole
585
Preparation of Some Bifunctional Catalysts for Direct Conversion of Synthesis Gas to Dimethyl Ether
586
Preparation of Some Colored Food Products using Sweet Pepper as A Functional Component
587
Preparation of some dinuclear rhodium complexes with the orthometallated ligand [2,6-(PPh2CH2)2C6H3]− and their catalytic activity for polymerization of phenylacetylene
588
Preparation of some metal ferrite MFe2O4 thin films through a nonaqueous sol method
589
Preparation of some metal phosphides by ball milling
590
Preparation of some metal phosphides by ball milling
591
Preparation of some starch ethers using the semi-dry state process
592
Preparation of some starch-based neutral chelating agents Original Research Article
593
Preparation of Sound Absorption Material Based on Interpenetrating Polymer Network (PU/PMMA IPN)
594
Preparation of soy hull pectin
595
Preparation of Soy Protein Concentrate by Ultrafiltration
596
Preparation of spacer-containing di-, tri-, and tetrasaccharide fragments of the circulating anodic antigen of Schistosoma mansoni for diagnostic purposes
597
Preparation of SPE hybrid mesoporous silica sorbents for the analysis and removal of organic pollutants in water
598
Preparation of special cements from red mud
599
Preparation of spent brewer’s yeast β-glucans with a potential application as an immunostimulant for black tiger shrimp, Penaeus monodon
600
Preparation of spent brewers yeast (beta)-glucans for potential applications in the food industry
601
Preparation of spherical activated carbon with high electric double-layer capacitance
602
Preparation of spherical and dense Na2O–B2O3–SiO2 glass powders by ultrasonic spray pyrolysis technique
603
Preparation of spherical apatite particles by the homogeneous precipitation method in the presence of magnesium ions and their ion-exchange properties
604
Preparation of spherical foamed body with function of media for waste water treatment by using waste LCD glass
605
Preparation of spherical fuel elements for HTR-PM in INET
606
Preparation of spherical hydrous-zirconia nanoparticles by low temperature hydrolysis in a reverse microemulsion
607
Preparation of spherical iron nanoclusters in ethanol–water solution for nitrate removal
608
Preparation of spherical MCM-41 molecular sieve at room temperature: Influence of the synthesis conditions in the structural properties
609
Preparation of spherical nanoparticles of LaAlO3 via the reverse microemulsion process
610
Preparation of spherical particles of Li2TiO3 (with diameters below 100 μm) by sol–gel process
611
Preparation of spherical silica in emulsion systems using the co-precipitation technique
612
Preparation of spherical silica particles in reverse micro emulsions using silicon tetrachloride as precursor
613
Preparation of spherical silica powder by oxygen–acetylene flame spheroidization process
614
Preparation of spherical silver particles for solar cell electronic paste with gelatin protection
615
Preparation of spherical spinel LiMn2O4 cathode material for Li-ion batteries
616
Preparation of spherical ultrafine zirconia powder in microemulsion system and its dispersibility
617
Preparation of spherical zirconia powder in microemulsion system and its densification behavior
618
Preparation of spherulites from amylose–palmitic acid complexes
619
Preparation of spherulites from amylose–palmitic acid complexes
620
Preparation of spherulites from jet cooked mixtures of high amylose starch and fatty acids. Effect of preparative conditions on spherulite morphology and yield
621
Preparation of spindly CuO micro-particles for photodegradation of dye pollutants under a halogen tungsten lamp Original Research Article
622
Preparation of spinel ferrites from citrate precursor route—A comparative study
623
Preparation of spinel Li1.06Mn2O4−zClz cathode materials by the citrate gel method
624
Preparation of spinel lithium manganese oxide by aqueous co-precipitation
625
Preparation of Spiropiperidines in Water
626
Preparation of spongy microspheres consisting of functionalized multiwalled carbon nanotubes
627
Preparation of spongy microspheres consisting of functionalized multiwalled carbon nanotubes
628
Preparation of spray-dried microparticles using Gelucire 44/14 and porous calcium silicate or spherical microcrystalline cellulose to enhance transport of water-insoluble pranlukast hemihydrate across Caco-2 monolayers
629
Preparation of spray-dried powders leading to Nd:YAG ceramics: The effect of PVB adhesive
630
Preparation of Sr2Fe1–xScxMoO6–δ nanopowders and its electrical conductivity
631
Preparation of Sr2SiO4:Eu3+ phosphors by microwave-assisted sintering and their luminescent properties
632
Preparation of SrCe0.95Yb0.05O3−α perovskite for use as a membrane material in hollow fibre fabrication
633
Preparation of SrCe0.95Yb0.05O3–α hollow fibre membranes: Study on sintering processes
634
Preparation of SrS:Eu, Sm and its photostimulated luminescence
635
Preparation of SrTi0.1Fe0.9O3−δ and its photocatalysis activity for degradation of methyl orange in water
636
Preparation of SrTiO3 nanofibres by hydrothermal method
637
Preparation of SrTiO3 nanomaterial from layered titanate nanotubes or nanowires
638
Preparation of SrTiO3 thin films by the liquid phase deposition method
639
Preparation of SrTiO3-supported TiO2 photocatalyst
640
Preparation of SrZn2(PO4)2:Eu2+,Mn2+ phosphor and its photoluminescent properties
641
Preparation of S-sulfo albumin film and its cell adhesive property
642
Preparation of stabilized Gd-doped BaPrO3 materials by Zr substitution
643
Preparation of stabilized lidocaine particles by a combination of supercritical CO2 technique and particle surface control
644
Preparation of stable acrylate/montmorillonite nanocomposite latex via in situ batch emulsion polymerization: Effect of clay types
645
Preparation of stable aqueous dispersion of graphene nanosheets and their electrochemical capacitive properties
646
Preparation of stable carbon nanotube aerogels with high electrical conductivity and porosity Original Research Article
647
Preparation of stable CdS nanoparticles in aqueous medium and their hydrogen generation efficiencies in photolysis of water
648
Preparation of stable dispersion of barium titanate nanoparticles: Potential applications in biomedicine
649
Preparation of stable dispersions of Ni nanoparticles using a polymeric dispersant in water
650
Preparation of stable enteric folic acid-loaded microfiber using the electrospinning method
651
Preparation of stable fulvene and difulvene aldehydes from benzaldehydes and an indene-derived enamine: formation of novel indene-fused benzodiazepines and attempted syntheses of di- and tricarbaporphyrinoid systems
652
Preparation of stable gelatin/sodium carboxymethylcellulose/sodium lauryl sulfonate microcapsules with ultra-thin capsule wall for electrophoretic displays
653
Preparation of stable MCM-48 tubular membranes
654
Preparation of stable mesoporous inorganic oxides via nano-replication technique
655
Preparation of stable mesoporous silica FSM-16 from water glass in the presence of cetylpyridium bromide
656
Preparation of stable micelle-like particles with rigid backbones based on pyridyl-terminated poly (aryl ether ketone)
657
Preparation of stable Pd nanocubes and their use in biological labeling
658
Preparation of Stable Plurilamellar Liposomes Dispersed in Two Soluble Types of Collagens and the Effect of Collagens on the Release Rate of Entrapped Sodium Chromate
659
Preparation of stable polyurethane–polystyrene copolymer emulsions via RAFT polymerization process
660
Preparation of stable porous nickel and cobalt oxides using simple inorganic precursor, instead of alkoxides, by a sonochemical technique
661
Preparation of stable porous nickel and cobalt oxides using simple inorganic precursor, instead of alkoxides, by a sonochemical technique
662
Preparation of stable spherical micelles with rigid backbones based on polyaryletherketone copolymers containing lateral pyridyl groups
663
Preparation of stable sub 10 nm copper nanopowders redispersible in polar and non-polar solvents
664
Preparation of stable sulfated zirconia by thermal activation from a zirconium doped mesoporous MCM-41 silica: Application to the esterification of oleic acid with methanol
665
Preparation of stable suspensions of gold nanoparticles in water by sonoelectrochemistry
666
Preparation of stable suspensions of gold nanoparticles in water by sonoelectrochemistry
667
Preparation of Stable, Granular Formulations ContainingFusarium oxysporumPathogenic to Narcotic Plants
668
Preparation of stainless steel microreactors coated with carbon nanofiber layer: Impact of hydrocarbon and temperature
669
Preparation of stair-step grooves by wet etching of AlAs/GaAs heterostructures and MOCVD growth of QWR
670
Preparation of stair-step grooves by wet etching of AlAs/GaAs heterostructures and MOCVD growth of QWR
671
Preparation of star copolymers with three arms of poly(ethylene oxide-co-glycidol)-graft-polystyrene and investigation of their aggregation in water
672
Preparation of star polymers based on polystyrene or poly(styrene-b-N-isopropyl acrylamide) and divinylbenzene via reversible addition-fragmentation chain transfer polymerization
673
Preparation of starch betainate: a novel cationic starch derivative
674
Preparation of starch derivatives using reactive extrusion and evaluation of modified starches as shell materials for encapsulation of flavoring agents by spray drying Original Research Article
675
Preparation of starch-based nanoparticles through high-pressure homogenization and miniemulsion cross-linking: Influence of various process parameters on particle size and stability
676
Preparation of starch-based scaffolds for tissue engineering by supercritical immersion precipitation
677
Preparation of starches with low glycaemic response using amylosucrase and their physicochemical properties
678
Preparation of starch-g-polystyrene copolymer by emulsion polymerization
679
Preparation of starch–sodium lignosulfonate graft copolymers via laccase catalysis and characterization of antioxidant activity
680
Preparation of starch-stabilized silver nanoparticles from amylose–sodium palmitate inclusion complexes
681
Preparation of stationary phases for open-tubular capillary electrochromatography using the sol–gel method
682
Preparation of stationary phases for reversed-phase high-performance liquid chromatography using thermal treatments at high temperature
683
Preparation of steam-activated carbons as catalyst supports
684
Preparation of stem cell aggregates with gelatin microspheres to enhance biological functions
685
Preparation of sterically congested 1,3,4-oxadiazole derivatives from N-isocyaniminotriphenylphosphorane, aromatic acids, cyclopentanone and primary amines
686
Preparation of sterol-imprinted polymers with the use of 2-(methacryloyloxy)ethyl phosphate
687
Preparation of S-TiO2 photocatalyst and photodegradation of L-acid under visible light
688
Preparation of stir bars for sorptive extraction based on monolithic material
689
Preparation of stir bars for sorptive extraction using sol–gel technology
690
Preparation of stoichiometric GaN(0 0 0 1)-1 × 1 studied with spectromicroscopy
691
Preparation of Strong Antidandruff Shampoo Using Medicinal Plant Extracts: A Clinical Trial and Chronic Dandruff Treatment
692
Preparation of strongly fluorescent silica nanoparticles of polyelectrolyte-protected cadmium telluride quantum dots and their application to cell toxicity and imaging Original Research Article
693
Preparation of Strontium Bismuth Tantalum (SBT) Fine Powder by Sol-Gel Process Using Bismuth Subnitrate as Bismuth Source
694
Preparation of strontium-based fibers via electrospinning technique
695
Preparation of structurally controlled dilute molybdenum–titanium alloys through a novel multi-step internal nitriding technique and their mechanical properties
696
Preparation of structured sol–gel films using tape casting method
697
Preparation of Students Completing a Core-Plus or Commercially Developed High School Mathematics Curriculum for Intense College Mathematics Coursework
698
Preparation of styrene-co-4-vinylpyridine magnetic polymer beads by microwave irradiation for analysis of trace 24-epibrassinolide in plant samples using high performance liquid chromatography
699
Preparation of submicrometer nickel powders by the reduction from nonaqueous media
700
Preparation of sub-micrometer porous membrane from chitosan/polyethylene glycol semi-IPN
701
Preparation of submicrometer-sized copper and silver crystallites by a facile solvothermal complexation–reduction route
702
Preparation of sub-micron colored particles by controlled emulsion polymerization
703
Preparation of submicron LaCaMnO submicron powder and LaCaMnO–alumina composites with CMR effects by a new method: Precursor sintering technique
704
Preparation of submicron nickel powders by microwave-assisted hydrothermal method
705
Preparation of sub-micron PZT particles with the sol–gel technique
706
Preparation of submicron talc particles by sonication
707
Preparation of submicron-sized Mg(OH)2 particles through precipitation
708
Preparation of submicron-sized RDX particles by rapid expansion of solution using compressed liquid dimethyl ether
709
Preparation of substituted 1,2,3,4-tetrahydroquinoxalines and 2,3,4,5-tetrahydro-1H-benzo[b][1,4]diazepines from catalytic Cp∗Ir hydrogen transfer N-heterocyclization of anilino alcohols
710
Preparation of substituted allyl acetates and sulfones from Baylis–Hillman adducts in ionic liquid media
711
Preparation of substituted chlorins and benzochlorins
712
Preparation of substituted polyaniline/chitosan composites by in situ electropolymerization and their application to glucose sensing
713
Preparation of substituted pyrroles via Ru(II)-catalyzed coupling of alkynes with enamides
714
Preparation of substituted semicarbazides from corresponding amines and hydrazines via phenyl carbamates
715
Preparation of substituted transition-metal (η1-propargyl complexes and their [3+2] cycloaddition reactions with sulfur dioxide and disulfur monoxide. Transition-metal–carbon bond cleaving reactions of the cycloadducts which yield oxathiolene oxides and d
716
Preparation of succinylated derivatives of psyllium and their physicochemical and bile acid-binding properties
717
Preparation of sucrose heptaesters unsubstituted at the C-1 hydroxy group of the fructose moiety via selective O-desilylation
718
Preparation of sugarcane bagasse cellulosic phthalate using an ionic liquid as reaction medium
719
Preparation of sugarcane bagasse hemicellulosic succinates using NBS as a catalyst
720
Preparation of sugar-derived 1,2-diamines via indium-catalyzed aza-Henry-type reaction: application to the synthesis of 6-amino-1,6-dideoxynojirimycin
721
Preparation of sulfated zirconia catalysts with improved control of sulfur content II. Effect of sulfur content on physical properties and catalytic activity Original Research Article
722
Preparation of sulfated zirconia catalysts with improved control of sulfur content Original Research Article
723
Preparation of sulfated zirconia catalysts with improved control of sulfur content, III. Effect of conditions of catalyst synthesis on physical properties and catalytic activity Original Research Article
724
Preparation of sulfated-chitins under homogeneous conditions
725
Preparation of sulfated-chitins under homogeneous conditions
726
Preparation of sulfoacetate derivatives of cellulose by direct esterification Original Research Article
727
Preparation of sulfonamides from N-silylamines
728
Preparation of sulfonated crosslinked PTFE-graft-poly(alkyl vinyl ether) membranes for polymer electrolyte membrane fuel cells by radiation processing
729
Preparation of sulfonated graphene/polypyrrole solid-phase microextraction coating by in situ electrochemical polymerization for analysis of trace terpenes
730
Preparation of sulfonated graphene–polyaniline nanofiber composites by oil/water interfacial polymerization and their application for supercapacitors
731
Preparation of sulfonated ordered mesoporous carbon and its use for the esterification of fatty acids
732
Preparation of sulfonated overoxidized polypyrrole film applicable as an SPME tool for cationic analytes
733
Preparation of sulfonated poly(phthalazinone ether sulfone ketone) composite nanofiltration membrane
734
Preparation of Sulfonated PVA-TMSP Membranes for Direct Methanol Fuel Cell
735
Preparation of sulfonated SEBS block copolymer membranes and their permeation properties Original Research Article
736
Preparation of Sulfur Mortar from Modified Sulfur
737
Preparation of sulfur-doped microporous carbons for the storage of hydrogen and carbon dioxide Original Research Article
738
Preparation of sulfuric acid ([3-(3-silicapropyl)sulfanyl]propyl)ester: A new and recyclable catalyst for the formylation and acetylation of alcohols under heterogeneous conditions Original Research Article
739
Preparation of Super Soft Granules from Nanosized Ceramic Powders by Spray Freezing
740
Preparation of super water-repellent membrane by radiation-induced copolymerization
741
Preparation of superabsorbent cellulosic hydrogels
742
Preparation of superacids by metal oxides for reactions of butanes and pentanes Original Research Article
743
Preparation of superconducting HgBa2CaCu2Ox thin films on the distinct substrates
744
Preparation of superhard amorphous carbon films with low internal stress
745
Preparation of super-hydrophilic amorphous titanium dioxide thin film via PECVD process and its application to dehumidifying heat exchangers
746
Preparation of superhydrophilic mesoporous SiO2 thin films
747
Preparation of superhydrophobic and UV blocking cotton fabric via sol–gel method and self-assembly
748
Preparation of superhydrophobic boehmite and anatase nanocomposite coating films
749
Preparation of superhydrophobic coating using modified CaCO3
750
Preparation of superhydrophobic cotton fabrics based on SiO2 nanoparticles and ZnO nanorod arrays with subsequent hydrophobic modification
751
Preparation of superhydrophobic films on copper substrate for corrosion protection
752
Preparation of superhydrophobic films on titanium as effective corrosion barriers
753
Preparation of super-hydrophobic films using pulsed hexafluorobenzene plasma
754
Preparation of superhydrophobic membranes by electrospinning of fluorinated silane functionalized poly(vinylidene fluoride)
755
Preparation of superhydrophobic membranes by electrospinning of fluorinated silane functionalized pullulan
756
Preparation of superhydrophobic poly(methyl methacrylate)-silicon dioxide nanocomposite films
757
Preparation of superhydrophobic polyimide films modified with organosilicasol as effective anticorrosion coatings
758
Preparation of superhydrophobic poly-p-phenylenebenzobisoxazole (PBO) fiber bundles
759
Preparation of superhydrophobic polystyrene membranes by electrospinning
760
Preparation of superhydrophobic silica film on Mg–Nd–Zn–Zr magnesium alloy with enhanced corrosion resistance by combining micro-arc oxidation and sol–gel method
761
Preparation of super-hydrophobic surface on biodegradable polymer by transcribing microscopic pattern of water-repellent leaf
762
Preparation of super-hydrophobic surface on stainless steel
763
Preparation of superhydrophobic surface with a novel sol–gel system
764
Preparation of superhydrophobic titanium surfaces via electrochemical etching and fluorosilane modification
765
Preparation of superhydrophobic zinc coating for corrosion protection
766
Preparation of superparamagnetic magnetite nanoparticles by reverse precipitation method: Contribution of sonochemically generated oxidants
767
Preparation of superparamagnetic magnetite nanoparticles by reverse precipitation method: Contribution of sonochemically generated oxidants
768
Preparation of superparamagnetic nanocomposite particles for hyperthermia therapy application
769
Preparation of Superparamagnetic of Co0.5Zn0.5Fe2O4 at Room Temperature by Co-precipitation Method and Investigation of Its Physical Properties
770
Preparation of superporous poly(4-vinyl pyridine) cryogel and their templated metal nanoparticle composites for H2 production via hydrolysis reactions
771
Preparation of Super-Water-Repellent Alumina Coating Film with High Transparency on Poly(ethylene terephthalate) by the Sol-Gel Method
772
Preparation of supported carbon membranes from furfuryl alcohol by vapor deposition polymerization
773
Preparation of supported carbon molecular sieve membrane from novolac phenol–formaldehyde resin
774
Preparation of supported carbon molecular sieve membranes Original Research Article
775
Preparation of Supported Gold Catalysts by Liquid-Phase Grafting of Gold Acethylacetonate for Low-Temperature Oxidation of CO and of H2
776
Preparation of supported H3PW12040·6H2O for thiophenic compounds alkylation in FCC gasoline Original Research Article
777
Preparation of supported ionic liquid membranes (SILMs) for the removal of acidic gases from crude natural gas Original Research Article
778
Preparation of supported ionic liquid membranes: Influence of the ionic liquid immobilization method on their operational stability
779
Preparation of supported lipid membranes for aquaporin Z incorporation
780
Preparation of supported metallic nanoparticles using supercritical fluids: A review
781
Preparation of supported nano-sized cobalt oxide and fcc cobalt crystallites
782
Preparation of supported NbC catalysts from peroxoniobic acid and in situ XAFS characterization Original Research Article
783
Preparation of supported Ni catalysts with a core/shell structure and their catalytic tests of partial oxidation of methane
784
Preparation of supported Pt–Co alloy nanoparticle catalysts for the oxygen reduction reaction by coverage with silica
785
Preparation of supported Sil-1, TS-1 and VS-1 membranes: Effects of Ti and V metal ions on the membrane synthesis and permeation properties
786
Preparation of supported zirconia ultrafiltration membranes with the aid of polymeric additives
787
Preparation of supramolecular host complex composed of 1D charge-transfer column-like structure using 6,6′-disubstituted-1,1′-bi-2-naphthol and methylviologen
788
Preparation of surface acoustic wave odor sensors by laser-induced forward transfer
789
Preparation of Surface Amino Modified Magnesium Doped Lithium Manganese Oxide Nanosorbent and Its Investigation for Dye Removal
790
Preparation of surface bound silver nanoparticles on polyimide by surface modification method and its application on electroless metal deposition
791
Preparation of surface energy controlled automotive clearcoats loaded with functional silicon additives: Studying the resistance against tree gum attack
792
Preparation of surface initiated polystyrenesulfonate films and PEDOT doped by the films
793
Preparation of surface modifications of mesoporous titania with monosubstituted Keggin units and their catalytic performance for organochlorine pesticide and dyes under UV irradiation Original Research Article
794
Preparation of surface modified magnetic Iron Oxide nanoparticles and study of their colloidal behavior
795
Preparation of surface modified nano-Mg(OH)2 via precipitation method
796
Preparation of surface modified porous membranes and their pervaporation properties Original Research Article
797
Preparation of surface modified zinc oxide nanoparticle with high capacity dye removal ability
798
Preparation of surface molecularly imprinted polymeric microspheres and their recognition property for basic protein lysozyme
799
Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles
800
Preparation of surface-modified albumin nanospheres
801
Preparation of surface-modified carbonaceous thin-film electrodes by NF3 plasma and their electrochemical properties
802
Preparation of surface-modified mesoporous silica membranes and separation mechanism of their pervaporation properties Original Research Article
803
Preparation of surface-silvered graphene-CNTs/polyimide hybrid films: Processing, morphology and properties
804
Preparation of surface-vitrified micron sphere using perlite from Xinyang, China
805
Preparation of surfactant anion-selective electrodes with different selectivity coefficients and a trial to determine each component in binary surfactant mixtures Original Research Article
806
Preparation of surfactant templated nanoporous silica spherical particles by the Sto¨ber method. Effect of solvent composition on the particle size
807
Preparation of surimi gels from striped mullet (Mugil cephalus) using an optimal level of calcium chloride
808
Preparation of Sustained-Release Matrix Tablets of Aspirin with Ethylcellulose, Eudragit RS100 and Eudragit S100 and Studying the Release Profiles and their Sensitivity to Tablet Hardness
809
Preparation of symmetrical and unsymmetrical monomers towards bridge trifluoromethylated poly(p-phenylenevinylene)
810
Preparation of Symmetrical Tetraphenyl Porphyrin Metal Complexes and Their Spectroscopic Studies
811
Preparation of syn and anti cyclophanes having oligothiophene units and their spectral properties
812
Preparation of syndiotactic polystyrene using the doubly bridged dinuclear titanocenes
813
Preparation of Synthetic Calibration Materials for Use in the Microanalysis of Oxide Minerals by Direct Fusion in High-Purity Graphite Electrodes: Preliminary Results for Quartz and Rutile
814
Preparation of synthetic carbon adsorbents and investigation on porous structure of obtained adsorbents with αs method
815
Preparation of synthetic nanopores with transport properties analogous to biological channels
816
Preparation of synthetic rutile and metal-doped LiFePO4 from ilmenite
817
Preparation of synthetic rutile by hydrochloric acid leaching of mechanically activated Panzhihua ilmenite
818
Preparation of synthetic rutile from pre-treated ilmenite/Ti-rich slag with phenol and resorcinol leaching solutions
819
Preparation of tadpole-shaped calcium alginate microparticles with sphericity control
820
Preparation of tagged glucose as a key intermediate in the synthesis of branched oligosaccharides
821
Preparation of tailor-made starch-based aerogel microspheres by the emulsion-gelation method
822
Preparation of tamarind fruit seed activated carbon by microwave heating for the adsorptive treatment of landfill leachate: A laboratory column evaluation
823
Preparation of tamarind gum based soft ion gels having thixotropic properties
824
Preparation of TaN/C (carbon microcoils)/TaN composite microtubes and TaN microtubes by vapor phase diffusion treatment of carbon microcoils
825
Preparation of TaN/C (carbon microcoils)/TaN composite microtubes and TaN microtubes by vapor phase diffusion treatment of carbon microcoils
826
Preparation of tantalum carbonitride by self-propagating high-temperature synthesis of Ta-C system in nitrogen
827
Preparation of tantalum nanopowders through hydrogen reduction of TaCl5 vapor
828
Preparation of tantalum oxide thin films by photo-assisted atomic layer deposition
829
Preparation of targets by electrodeposition for heavy element studies
830
Preparation of targets by electrodeposition for heavy element studies
831
Preparation of targets by sputter deposition
832
Preparation of targets by sputter deposition
833
Preparation of targets for the gas-filled recoil separator TASCA by electrochemical deposition and design of the TASCA target wheel assembly
834
Preparation of targets for the gas-filled recoil separator TASCA by electrochemical deposition and design of the TASCA target wheel assembly
835
Preparation of tartaric acid modified Raney nickel catalysts: study of modification procedure Original Research Article
836
Preparation of Te nanopowder by vacuum distillation
837
Preparation of telechelic oligomers by thermal degradation of propylene copolymers
838
Preparation of tellurite thin films from tellurium isopropoxide precursor by sol–gel processing
839
Preparation of TEM plan-view and cross-sectional specimens of ZnSe/GaAs epilayers by chemical thinning and argon ion milling
840
Preparation of TEM plan-view and cross-sectional specimens of ZnSe/GaAs epilayers by chemical thinning and argon ion milling
841
Preparation of TEM samples for hard ceramic powders
842
Preparation of TEM samples for hard ceramic powders
843
Preparation of temperature-sensitive microemulsion-based gels formed from a triblock copolymer
844
Preparation of TeO2 based thin films by nonhydrolytic sol–gel process
845
Preparation of ternary I-IV-VI nanocrystallines via a mild solution route
846
Preparation of ternary metal chalcogenide (M1-xFexS, M = Cd and Zn) nanocrystallites using single source precursors
847
Preparation of ternary rare earth sulfide LaxCe2–xS3 as red pigment
848
Preparation of tertiary amides via aryl, heteroaryl, and benzyl organozinc reagents; scope and limitations
849
Preparation of tetra-Boc-protected polymyxin B nonapeptide
850
Preparation of tetracycline microparticles suitable for inhalation administration by supercritical fluid expansion depressurization
851
Preparation of tetrafluorohydrazine from nitrogen trifluoride with iron or iron(II) fluoride
852
Preparation of tetrahydroimidazo[2,1-a]isoquinolines and their use as inhibitors of gastric acid secretion Original Research Article
853
Preparation of textured Ba2NaNb5O15 ceramics by templated grain growth
854
Preparation of textured Bi3TiNbO9 ceramics
855
Preparation of the 14-membered l,l-cycloisodityrosine subunit of RP 66453
856
Preparation of the antithrombotic and antimicrobial coating through layer-by-layer self-assembly of nattokinase-nanosilver complex and polyethylenimine
857
Preparation of the BaTiO3–SiO2 hybrid particles for the catalyst of methane steam reforming process
858
Preparation of the bulk Fe–Al–Ga–P–C–B–Si glassy alloys in a ringed form by copper mold casting
859
Preparation of the bulk Fe–Al–Ga–P–C–B–Si glassy alloys in a ringed form by copper mold casting
860
Preparation of the CdS semiconductor nanofibril by UV irradiation
861
Preparation of the cellulose/silica hybrid containing cationic group by sol–gel crosslinking process and its dyeing properties
862
Preparation of the cellulose/silica hybrid containing cationic group by sol–gel crosslinking process and its dyeing properties
863
Preparation of the composite LaNi3.7Al1.3/Ni–S–Co alloy film and its HER activity in alkaline medium
864
Preparation of the conjugated polyene chains with the 1,4-dimethyl substitution
865
Preparation of the crack-free single phase (Zn1–xCdx)13Sb10 by a gradient freeze method and their structural and thermoelectric properties
866
Preparation of the cubic-type La2O3 phase by thermal decomposition of LaI3
867
Preparation of the egg membrane bandage contained the antibacterial Ag nanoparticles
868
Preparation of the electroless Ni–P and Ni–Cu–P coatings on engine cylinder and their tribological behaviors under bio-oil lubricated conditions
869
Preparation of the electrospun chitosan nanofibers and their applications to the adsorption of Cu(II) and Pb(II) ions from an aqueous solution
870
Preparation of the femoral bone cavity in cementless stems: broaching versus compaction
871
Preparation of the First Examples of Ansa-Spiro Substituted Fluorophosphazenes and Their Structural Studies: Analysis of C-H···F-P Weak Interactions in Substituted Fluorophosphazenes
872
Preparation of the first ortho-substituted pentafluorosulfanylbenzenes
873
Preparation of the future teacher for work with gifted children
874
Preparation of the highly loaded and well-dispersed NiO/SBA-15 for methanation of producer gas
875
Preparation of the hydrocarbon-soluble trifluoro complex LTiF3 with a β-diketiminato ligand
876
Preparation of the hydrophilic/hydrophobic silica particles
877
Preparation of the hypoxia imaging PET tracer [18F]FAZA: reaction parameters and automation
878
Preparation of the La0.8Sr0.2MnO3 films on STO and LAO substrates by excimer laser-assisted metal organic deposition using the KrF laser
879
Preparation of the liquid lithium divertor plates for NSTX
880
Preparation of the MacMillan imidazolidinones
881
Preparation of the major urinary metabolite of (−)-prostaglandin E2
882
Preparation of the manufacture of the ITER correction coils
883
Preparation of the metastable compound Au3Si by quenching liquid droplets of a Au–25 at.% Si allow into water
884
Preparation of the metastable compound Au3Si by quenching liquid droplets of a Au–25 at.% Si allow into water
885
Preparation of the methyl ester of hyaluronan and its enzymatic degradation Original Research Article
886
Preparation of the mixture of graphene nanosheets and carbon nanospheres with high adsorptivity by electrolyzing graphite rod and its application in hydroquinone detection
887
Preparation of the monomers of gingerols and 6-shogaol by flash high speed counter-current chromatography
888
Preparation of the multifunctional antireflective films from a templating composite silica sol with entwining structures
889
Preparation of the Neolignan Natural Product Grossamide by a Continuous-Flow Process
890
Preparation of the Ni-B amorphous alloys with variable boron content and its correlation to the hydrogenation activity Original Research Article
891
Preparation of the nickel foam/Ni–Ce–Co–O film electrode by thermal decomposition for oxygen evolution reaction
892
Preparation of the NiFe2O4 electrochemical film for the solid-state reference electrode based on EB-PVD
893
Preparation of the Ni–P composite coating co-deposited by nano TiC particles and evaluation of itʹs corrosion property
894
Preparation of the novel fluorine-18-labeled VIP analog for PET imaging studies using two different synthesis methods
895
Preparation of the novel manganese-embedded PAN-based activated carbon nanofibers by electrospinning and their toluene adsorption
896
Preparation of the novel manganese-embedded PAN-based activated carbon nanofibers by electrospinning and their toluene adsorption
897
Preparation of the novel XC(O)SeX species (X = Cl, Br) through matrix photochemical reactions of OCSe with Cl2 and Br2 at cryogenic temperatures
898
Preparation of the palladium(II) dimethylamide Pd(2,6-(Ph2PCH2)2C6H3)(NMe2) at low temperatures and its ligand exchange with the dicyclohexylamide
899
Preparation of the Pb(Mg1/3Nb2/3)O3 films by aqueous tape casting
900
Preparation of the pentasaccharide hapten of the GPL of Mycobacterium avium serovar 19 by achieving the glycosylation of a tertiary hydroxyl group Original Research Article
901
Preparation of the Persian Gulf Echinometra mathaei Organic Extracts and Investigation of Their Antibacterial Activity
902
Preparation of the Persian Gulf Echinometra mathaei Organic Extracts and Investigation of Their Antibacterial Activity
903
Preparation of the photosensitive copper complex and CuO film pattern
904
Preparation of the poly(vinyl alcohol)/layered double hydroxide nanocomposite
905
PREPARATION OF THE POPULATION AND HEALTHCARE SYSTEM FOR ACTION IN CASES OF RADIATION ACCIDENT AND NUCLEAR TERRORISM
906
Preparation of the Potential Ocular inserts by Electrospinning Method to Achieve the Prolong Release Profile of Triamcinolone Acetonide
907
Preparation of the PVA/HAP composite polymer membrane for alkaline DMFC application Original Research Article
908
Preparation of the reticulated hydroxyapatite ceramics using carbon-coated polymeric sponge with elongated pores as a novel template
909
Preparation of the rod-like β-Si3N4 particles favoring the self-reinforcing Si3N4 ceramics
910
Preparation of the silicalite membranes using a seeding technique under various hydrothermal conditions Original Research Article
911
Preparation of the sodium salt of high acyl gellan and characterization of its structure, thermal and rheological behaviors
912
Preparation of the Speech-LanguagePathologist Specializing in Voice: An Educational Survey
913
Preparation of the squalene-based capsules by membrane emulsification method and polyelectrolyte multilayer adsorption
914
Preparation of the SrCe0.95Yb0.05O3−α proton conductor and study of the electrokinetics at the SrCe0.95Yb0.05O3−α/Pd interface
915
Preparation of the stimuli-responsive ZnS/PNIPAM hollow spheres
916
Preparation of the subnanometer thick epitaxial Al2O3(0001) layers on Fe(110) for magnetic tunnel junctions
917
Preparation of the substituted salicylato of titanocene derivatives by the liquid–liquid interfacial reaction
918
Preparation of the thermally stable conducting polymer PEDOT – Sulfonated poly(imide)
919
Preparation of the thicker americium targets by molecular plating
920
Preparation of the Three C1-C7, C8-C15, and C16-N22 Fragments of the Hsp90 Inhibitor Herbimycin A
921
Preparation of the ultrafine SrAl2O4:Eu,Dy needle-like phosphor and its optical properties
922
Preparation of the ZrTiAlV alloy with ultra-high strength and good ductility
923
Preparation of the β-cyclodextrin-vitamin C (β-CD-Vc) inclusion complex under high hydrostatic pressure (HHP)
924
Preparation of thermal stable porous polyimide membranes by phase inversion process for lithium-ion battery
925
Preparation of thermally curable conductive films PEDOT:P(SS-NMA) and their performances on weather stability and water resistance
926
Preparation of thermally stable polymer electrolytes from imidazolium-type ionic liquid derivatives
927
Preparation of thermoplastic elastomer from natural rubber grafted with polystyrene
928
Preparation of thermo-responsive acrylic hydrogels useful for the application in transdermal drug delivery systems
929
Preparation of thermoresponsive and pH-sensitivity polymer magnetic hydrogel nanospheres as anticancer drug carriers
930
Preparation of thermo-responsive core-shell microcapsules with a porous membrane and poly(N-isopropylacrylamide) gates
931
Preparation of thermo-responsive gating membranes with controllable response temperature
932
Preparation of thermoresponsive polymer brush surfaces and their interaction with cells
933
Preparation of thermo-responsive polymer brushes on hydrophilic polymeric beads by surface-initiated atom transfer radical polymerization for a highly resolutive separation of peptides
934
Preparation of thermo-responsive polypropylene membranes via surface entrapment of poly(N-isopropylacrylamide)-containing macromolecules
935
Preparation of thermo-responsive superhydrophobic TiO2/poly(N-isopropylacrylamide) microspheres
936
Preparation of thermosensitive chitosan with poly(N-isopropylacrylamide) side at hydroxyl group via O-maleoyl-N-phthaloyl-chitosan (MPCS)
937
Preparation of thermosensitive polymeric organogels and their drug release behaviors
938
Preparation of thermostable electroconductive composite plates from expanded graphite and polyimide
939
Preparation of thermostable trypsin–polysaccharide neoglycoenzymes through Ugi multicomponent reaction
940
Preparation of thick enriched isotopic Si targets by the HIVIPP method
941
Preparation of thick enriched isotopic Si targets by the HIVIPP method
942
Preparation of thick GeO2 glass film with high UV photosensitivity
943
Preparation of thick, crack-free germanosilicate glass films by polyvinylpyrrolidone and study of the UV-bleachable absorption band
944
Preparation of thieno[2,3-b]pyrroles starting from ketene-N,S-acetals
945
Preparation of thin and highly stable Pd/Ag composite membranes and simulative analysis of transfer resistance for hydrogen separation
946
Preparation of thin carbon fibers from phenol–formaldehyde polymer micro-beads dispersed in polyethylene matrix Original Research Article
947
Preparation of thin carbon fibers from waste wood-derived phenolic resin
948
Preparation of thin ceramic monofilaments for characterization by TEM
949
Preparation of thin ceramic monofilaments for characterization by TEM
950
Preparation of thin ceramic monofilaments for characterization by TEM
951
Preparation of thin ceramic monofilaments for TEM observation with novel embedding processes
952
Preparation of thin ceramic monofilaments for TEM observation with novel embedding processes
953
Preparation of thin film composite membranes with polyamide film on hydrophilic supports
954
Preparation of thin film of CaZrO3 by pulsed laser deposition
955
Preparation of thin film polycrystalline silicon on glass by photo-thermal annealing
956
Preparation of thin film SOFCs working at reduced temperature
957
Preparation of thin films and nanostructured coatings for clean tech applications: A primer
958
Preparation of thin films by sulfurizing sol–gel deposited precursors
959
Preparation of thin films of carbon-based compounds
960
Preparation of thin films of graphite-like B/C/N materials on Ni(1 1 1) and HOPG substrates
961
Preparation of thin films of YBa2Cu3Ox with a smooth surface by atomic layer MOCVD
962
Preparation of thin films of YBa2Cu3Ox with a smooth surface by atomic layer MOCVD
963
Preparation of thin Ga-doped ZnO layers for core–shell GaP/ZnO nanowires
964
Preparation of thin iron films by electrodeposition and characterization of their local magnetic properties
965
Preparation of thin layer materials with macroporous microstructure for SOFC applications
966
Preparation of thin metallic titanium foils as hydrogen targets
967
Preparation of thin metallic titanium foils as hydrogen targets
968
Preparation of thin Nd-doped YVO4 single crystal rods by the floating zone method
969
Preparation of thin palladium composite membrane tube by a CVD technique and its hydrogen permselectivity
970
Preparation of thin palladium membranes on a porous support with rough surface
971
Preparation of thin Pd membrane on CeO2-modified porous metal by a combined method of electroless plating and chemical vapor deposition
972
Preparation of thin Pd membrane on porous stainless steel tubes modified by a two-step method
973
Preparation of thin Pd-based composite membrane on planar metallic substrate: Part I: Pre-treatment of porous stainless steel substrate
974
Preparation of thin Pd-based composite membrane on planar metallic substrate: Part II. Preparation of membranes by electroless plating and characterization
975
Preparation of thin plastic conductive foils for use in a position-sensitive micro-channel plate detector system
976
Preparation of thin plastic conductive foils for use in a position-sensitive micro-channel plate detector system
977
Preparation of thin polymer films with controlled drug release
978
Preparation of thin polymer films with drug release and protein adsorption resistance
979
Preparation of thin ribbon and bulk glassy alloys in CoFeBSiNb(Ga) using planar flow casting and suction casting methods
980
Preparation of thin Si:H films in an inductively coupled plasma reactor and analysis of their surface roughness
981
Preparation of thin silver films on mica studied by XRD and AFM
982
Preparation of thin, homogeneous zinc targets by vacuum evaporation
983
Preparation of thin, homogeneous zinc targets by vacuum evaporation
984
Preparation of thin-film-composite polyamide membranes for desalination using novel hydrophilic surface modifying macromolecules
985
Preparation of thioesters for the ligation of peptides with non-native substrates
986
Preparation of thiophene-fused TTFs and their charge-transfer complexes
987
Preparation of ThO2 as a structural analogue for nuclear fuel via surfactanttemplated solgel route
988
Preparation of three dimensionally ordered macroporous Li0.35La0.55TiO3 by colloidal crystal templating process
989
Preparation of three new 4′-phenyl-terpyridine–copper(II) complexes containing nicotinate or iso-nicotinate ligands
990
Preparation of three-dimensional braided carbon fiber-reinforced PEEK composites for potential load-bearing bone fixations. Part I. Mechanical properties and cytocompatibility
991
Preparation of three-dimensional chromium oxide porous single crystals templated by SBA-15
992
Preparation of three-dimensional composite of poly(N-acetylaniline) nanorods/platinum nanoclusters and electrocatalytic oxidation of methanol
993
Preparation of three-dimensional shaped aluminum alloy foam by two-step foaming
994
Preparation of three-dimensionally ordered macroporous perovskite-type lanthanum–iron-oxide LaFeO3 with tunable pore diameters: High porosity and photonic property
995
Preparation of thymolphthalein stearate and appraisement of its efficacy as an antioxidant for polypropylene
996
Preparation of Ti incorporated Y zeolites by a post-synthesis method under acidic conditions and their catalytic properties Original Research Article
997
Preparation of Ti(IV), Zr(IV) and Sn(IV) metal alkyls containing the (PriO)3SiCH2 fragment
998
Preparation of Ti/PbO2–Sn anodes for electrochemical degradation of phenol
999
Preparation of Ti/SiO2 catalysts by chemical vapor deposition method for olefin epoxidation with cumene hydroperoxide Original Research Article
1000
Preparation of Ti/SnO2–Sb2O4 photoanode by electrodeposition and dip coating for PEC oxidations Original Research Article
