<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Technical and economical feasibility of the Rankine compression gas turbine (RCG)
2
Technical and economical feasibility of zeolite NaA membrane-based reactors in liquid-phase etherification reactions
3
Technical and economical model for the freezing cost comparison of immersion, cryomechanical and air blast freezing processes
4
Technical and economical optimisation of overhead power distribution line lightning protection
5
Technical and Economical Selection of Optimum Transfer-Transport Method in Solid Waste Management in Metropolitan Cities
6
Technical and economical system comparison of photovoltaic and concentrating solar thermal power systems depending on annual global irradiation
7
Technical and economical tools to assess customer demand response in the commercial sector
8
Technical and environmental effects of concrete production: dry batch versus central mixed plant
9
Technical and Financial Analysis of Email Marketing System
10
Technical and financial aspects of renewable energy applications in Poland
11
Technical and functional analysis of Albolafia waterwheel (Cordoba, Spain): 3D modeling, computational-fluid dynamics simulation and finite-element analysis
12
Technical and functional aspects of electronic journal systems developed in TULIP and EES projects
13
Technical and functional properties of some biocompatible thin films
14
Technical and governance considerations for advanced metering infrastructure/smart meters: Technology, security, uncertainty, costs, benefits, and risks
15
Technical and industrial overview of RF and microwave tubes for fusion
16
Technical and institutional factors in the emergence of project management
17
Technical and management perceptions of enterprise information system importance, implementation and benefits
18
Technical and managerial challenges of facade retention
19
Technical and managerial challenges of facade retention
20
Technical and Market Issues for Operating Reserves
21
Technical and Non-Technical Measures for air pollution emission reduction: The integrated assessment of the regional Air Quality Management Plans through the Italian national model
22
Technical and operational feasibility of psychrophilic anaerobic digestion biotechnology for processing ammonia-rich waste
23
Technical and operational performance of a small-scale comined heat-and-power (CHP) plant
24
Technical and Tactical Command Decision Algorithm of Football Matches Based on Big Data and Neural Network
25
Technical and Technological Principles of Functioning of Small Family Farm Pigs
26
Technical applicability of low-swirl fuel nozzle for liquid-fueled industrial gas turbine combustor
27
Technical application of conducting polymers for water treatment
28
Technical Application Series
29
Technical Application Series. A STRAIN DATA ACQUISITION SYSTEM SUITABLE FOR REMOTE APPLICATIONS
30
Technical Application Series. AN ADAPTIVE BACKWARD IMAGE CORRELATION TECHNIQUE FOR DEFORMATION MAPPING OF A GROWING CRACK IN THIN SHEETS
31
Technical Application Series. AN OPTICAL INTERFEROMETRIC SYSTEM FOR 3-D DISPLACEMENT MEASUREMENT
32
Technical approach for a sustainable tourism development. Case study in the Balearic Islands
33
Technical Approach to Simple the Purification Method and Characterization of Microblal Transgiutaminase Produced from Streptoverticillium ladakanum
34
Technical approaches for high-average-power free-electron lasers
35
Technical approaches to functional magnetic resonance imaging (In German)
36
Technical aspect of the optical depth sensor Original Research Article
37
Technical aspects and evaluation methodology for the application of two automated brain MRI tumor segmentation methods in radiation therapy planning
38
Technical aspects and manufacturing methods for JT-60SA toroidal field coil casings
39
Technical aspects and outcome of in situ right internal thoracic artery grafting to the major branches of the circumflex artery via the transverse sinus
40
Technical aspects and utility of fMRI using BOLD and ASL
41
Technical aspects concerning the detection of animal waste nutrient content via its electrical characteristics
42
Technical aspects of a worked proboscidean tusk from Inmachuk River, Seward Peninsula, Alaska
43
Technical aspects of abdominal stomas
44
Technical aspects of biodiesel production by transesterification—a review
45
Technical aspects of double-skeletonized internal mammary artery grafting
46
Technical aspects of flight safety of military aircraft
47
Technical aspects of home hemodialysis
48
Technical aspects of production and analysis of biodiesel from used cooking oil—A review
49
Technical aspects of the IV ventricle mapping during brainstem surgery
50
Technical aspects of total revascularization in off-pump coronary bypass via sternotomy approach
51
Technical assessment of bioenergy recovery from cotton stalks through anaerobic digestion process and the effects of inexpensive pre-treatments
52
Technical assessment of compressed hydrogen storage tank systems for automotive applications
53
Technical assessment of cryo-compressed hydrogen storage tank systems for automotive applications
54
Technical assessment of electric utility-interactive residential photovoltaic power systems
55
Technical assessment of fuel cell operation on anaerobic digester gas at the Yonkers, NY, wastewater treatment plant
56
Technical assessment of fuel cell operation on landfill gas at the Groton, CT, landfill
57
Technical assessment of solar thermal energy storage technologies
58
Technical Assessment of Space Solar-Power Research Program
59
Technical assessment of the use of a small-scale wind power system to meet the demand for electricity in a land aquafarm in Taiwan
60
Technical assessment of three layered cement-bonded boards produced from wastepaper and sawdust
61
Technical Assessment of Various Image Enhancement Techniques using Finger Vein for personal Authentication
62
Technical Assistance as Part of Routine Inspections of Family Child Care Homes
63
Technical assistance in prevention programs: correlates of perceived need in communities that care
64
Technical barriers to Hazard Analysis Critical Control Point (HACCP)
65
Technical benefit and risk analysis on cement clinkering process with compact internal burning of carbon
66
Technical Capability of Regional Development Planning Bodies in Absorbing Community Aspirations in Development Programs: Local Development Planning Perspectives
67
Technical challenges and recent progress in CCD imagers
68
Technical challenges and recent progress in CCD imagers
69
Technical Challenges and Utility of Anterior Exposure for Thoracic Spine Pathology
70
Technical challenges associated with the integration of wind power into power systems
71
Technical challenges for electric power industries due to grid-integrated electric vehicles in low voltage distributions: A review
72
Technical challenges of network anonymity
73
Technical challenges of neutrino factories
74
Technical challenges of neutrino factories
75
Technical challenges of protecting digital entertainment content
76
Technical Challenges to In-situ Remediation of Polluted Sites
77
Technical change and efficiency measures: the post-privatisation in the gas distribution sector in Argentina
78
Technical change and incorporated R&D in the service sector
79
Technical change and irreversible investment under risk
80
Technical change and productivity growth in airports: A case study
81
Technical change dynamics: evidence from the emerging renewable energy technologies
82
Technical change in banking
83
Technical Change in Chinese State Industry: A New Approach
84
Technical change in Senegal’s irrigated rice sector: impact assessment under uncertainty
85
Technical Change, External Economies, and the Porter Hypothesis
86
Technical characteristic analysis of wind energy conversion systems for sustainable development
87
Technical Characteristics and Nutritional Values of Einkorn Wheat: A Literature Review
88
Technical coefficients for bio-economic farm household models: a meta-modelling approach with applications for Southern Mali
89
Technical communication on status in developing a compass for risk assessment
90
Technical Communication Reviving the Company Newsletter
91
Technical Communication: Implications of the Liberalization of Veterinary Drug Marketing in Ghana
92
Technical Communication: On the European Water Resources Information Policy
93
Technical Communication: Two-Phase Stochastic Dynamic Programming Model for Optimal Operation of Irrigation Reservoir
94
Technical Communication: Usage of Storm Water Best Management Practices in Southern California
95
Technical comparison between TVC/MEB and MSF Original Research Article
96
Technical comparison between two pretreatment piping compact units for ultrafiltration water plants
97
Technical comparison of a CHP using various blends of gasohol in an IC engine
98
Technical complaint management as a lever for product and process improvement
99
Technical Conditions Survey of Simple-Support Bridges in a Severe Cold Region in Northeast China
100
Technical Conduct of the Child Sexual Abuse Medical Examination
101
Technical considerations affecting adoption of drip irrigation in sub-Saharan Africa
102
Technical considerations for analyzing EMT–MET data from surgical samples
103
Technical Considerations for Myocardial Revascularization in Congenital Bilateral Hypoplasia of the Pericardium
104
Technical considerations for transabdominal loading of the circular stapler in laparoscopic Roux-en-Y gastric bypass
105
Technical considerations of SOFCs for mixed DG/backup power applications
106
Technical cost analysis for PEM fuel cells
107
Technical demonstration of the novel Fraunhofer ISE biomass gasification process for the production of a tar-free synthesis gas
108
Technical design and economic evaluation of a PEM fuel cell system
109
Technical design and economic evaluation of a stand-alone PEFC system for buildings in Sweden
110
Technical design and performance of the NEMO 3 detector
111
Technical design and performance of the NEMO 3 detector
112
Technical design and principle test of active magnetic bearings for the turbine compressor of HTR-10GT
113
Technical design aspects of Feasibility Study-II
114
Technical design aspects of Feasibility Study-II
115
Technical Design of Constructed Wetland unity for Municipal Wastewater Treatment and Reuse for a Green Space Irrigation: Case of the new City of Ouled Djellal –Algeria
116
Technical design of NBI system for JT-60SA
117
Technical details for the sentinel node biopsy in breast cancer: a guide for the training process
118
Technical Details of Surgical Treatment of a Severely Displaced Sternal Fracture
119
Technical development of rotary desiccant dehumidification and air conditioning: A review
120
Technical developments at the KIT gyrotron test facility
121
Technical diagnosis system for EAST tokamak
122
Technical diagnostic of a fleet of vehicles using rough set theory
123
Technical dimensioning of a vertically upwards blowing air curtain—part I
124
Technical dimensioning of a vertically upwards-blowing air curtain—part II
125
Technical director
126
Technical education and library services: A study of the federal science and technical colleges in Nigeria
127
Technical Education and Vocational Training for Women: A case study of Yemen
128
Technical education transfer: perceptions of employee computer technology self-efficacy
129
Technical efficiency among the bulrush millet producers in Kenya
130
Technical efficiency analysis of information technology investments: a two-stage empirical investigation
131
Technical efficiency analysis of information technology investments: a two-stage empirical investigation
132
Technical Efficiency Analysis of Rice Production in Pakistan under Dry and Puddle Conditions: A Case Study of Selected Districts of Punjab province, Pakistan
133
Technical efficiency and CO2 abatement policies in the Dutch glasshouse industry
134
Technical efficiency and cost analysis in wastewater treatment processes: A DEA approach Original Research Article
135
Technical efficiency and distance to a reverse convex set
136
Technical efficiency and economies of scale in state owned enterprises: The Hellenic telecommunications organisation
137
Technical efficiency and economies of scale: A non-parametric analysis of REIT operating efficiency
138
Technical efficiency and farm size: a conditional analysis
139
Technical Efficiency and Farmersʹ Attitudes toward Technological Innovation: The Case of the Potato Farmers in Quebec
140
Technical efficiency and its affecting factors in Tehran’s public hospitals: DEA approach and Tobit regression
141
Technical Efficiency and Its Determinants in Food Crop Production: A Case Study of Farms in West Bank, Palestine
142
Technical Efficiency and Optimum Use of Inputs in Production of Apple in KB Province, Iran
143
Technical efficiency and productivity of maize producers in eastern Ethiopia: a study of farmers within and outside the Sasakawa-Global 2000 project
144
Technical efficiency and resources allocation in university hospitals in Tehran, 2009-2012
145
Technical Efficiency and Returns to Scale on Banking Sector: Empirical Evidence from GCC Countries
146
TECHNICAL EFFICIENCY AND TOTAL FACTOR PRODUCTIVITY GROWTH IN THE HAZELNUT AGRICULTURAL SALES COOPERATIVES UNIONS IN TURKEY
147
Technical efficiency and viability of organic dairy sheep farming systems in a traditional area for sheep production in Spain
148
Technical efficiency changes at the farm-level: A panel data analysis of rice farms in Bangladesh
149
TECHNICAL EFFICIENCY DIFFERENTIALS AMONG HIV/AIDS AFFECTED FARM HOUSEHOLDS IN MALAWI: EVIDENCE FROM TIME VARIANT AND INVARIANT INEFFICIENCY MODELS
150
Technical efficiency during economic reform in Nicaragua: evidence from farm household survey data
151
Technical efficiency estimation with multiple inputs and multiple outputs using regression analysis
152
Technical efficiency in developing country agriculture: a meta-analysis
153
Technical efficiency in multi-mode bus transit: A production frontier analysis
154
Technical efficiency in paddy farms of Tamil Nadu: An analysis based on farm size and ecological zone
155
Technical efficiency in resource use: Evidence from smallholder Irish potato farmers in Nyandarua North District, Kenya
156
Technical efficiency in Saudi banks
157
Technical efficiency in telecommunications in the United States and the impact of incentive regulation
158
Technical efficiency in the Spanish agrofood industry
159
Technical efficiency measurement and explanation of French urban transit companies
160
Technical efficiency of alternative farming systems: the case of Greek organic and conventional olive-growing farms
161
Technical Efficiency of Broiler Farms in District Mansehra, Pakistan:A Stochastic Frontier Trans-Log Production Approach
162
Technical Efficiency of Cash and Food Crops Producing Farms Across Three Districts in Northern Tajikistan: a Non-parametric Approach
163
Technical Efficiency of Chemical Fertilizers Use and Agricultural Yield: Evidence from India
164
Technical Efficiency of Chili Production
165
Technical Efficiency of Community Clinics in Kushtia, Bangladesh: A Nonparametric DEA Analysis
166
Technical Efficiency of Cotton Production in Pakistan: A Comparative Study on Non BT and BT-Cotton Farms
167
Technical efficiency of economic systems of EU-15 countries based on energy consumption
168
Technical Efficiency of Growing Sugarcane Crop in Khyber Pakhtunkhwa, Pakistan
169
Technical Efficiency of Hospitals in Tehran, Iran
170
TECHNICAL EFFICIENCY OF MAIZE FARMERS IN VARIOUS ECOLOGICAL ZONES OF AJK
171
TECHNICAL EFFICIENCY OF MAIZE PRODUCING FARMERS IN ARSI NEGELLE, CENTRAL RIFT VALLEY OF ETHIOPIA: STOCHASTIC FRONTIER APPROACH
172
Technical Efficiency of Medicinal and Herbal Plant Farms in Jordan
173
Technical Efficiency of Nigerian Insurance Companies: A Data Envelopment Analysis and Latent Growth Curve Modelling Approach
174
Technical efficiency of organic fertilizer in small farms of Nicaragua: 1998-2005
175
Technical efficiency of production in agricultural research
176
Technical efficiency of Shiraz school of medicine in research and education domains: a data envelopment analysis
177
Technical Efficiency of Small and Medium Enterprise in Malaysia: A Stochastic Frontier Production Model
178
Technical Efficiency of Sorghum Production in Hong Local Government Area of Adamawa State, Nigeria.
179
TECHNICAL EFFICIENCY OF SUGARCANE PRODUCTION IN DISTRICT DERA ISMAIL KHAN
180
Technical Efficiency of Teaching Hospitals in Iran: The Use of Stochastic Frontier Analysis, 1999–2011
181
Technical Efficiency of Temple Owned Lands in Tamil Nadu, India
182
Technical efficiency of the small scale sugarcane farmers in Swaziland: A case study of Vuvulane and Big bend farmers
183
Technical efficiency of traditional and hybrid maize farmers in Nigeria: Comparison of alternative approaches
184
Technical Efficiency of Wheat Growers in District Swabi of Khyber Pakhtunkhwa, Pakistan
185
Technical Efficiency of Wheat Production in District Peshawar, Khyber Pakhtunkhwa, Pakistan
186
TECHNICAL EFFICIENCY OF WHEAT PRODUCTION IN RAIN-FED AREAS: A CASE STUDY OF PUNJAB, PAKISTAN
187
Technical efficiency under alternative environmental regulatory regimes: The case of Dutch horticulture
188
Technical efficiency, allocative efficiency, and the impact of incentive regulation in telecommunications in the United States
189
Technical Efficiency, Technological Change and Output Growth of Wheat Farms in Saskatchewan
190
Technical efficiency-based selection of learning cases to improve forecasting accuracy of neural networks under monotonicity assumption: Parag C. Pendharkar and James A. Rodger, Decision Support Systems (36)
191
Technical entreprenenurship in high technology small firms: some observations on the implications for management
192
Technical entrepreneurship, strategic awareness and corporate transformation in small high-tech firms
193
Technical Evaluation and Practical Experience of High-Power Grinding Mill Drives in Mining Applications
194
Technical evaluation of a power generation process consuming municipal solid waste
195
Technical evaluation of a small-scale reverse osmosis desalination unit for domestic water Original Research Article
196
Technical evaluation of in vivo abdominal fat and IMCL quantification using MRI and MRSI at 3 T
197
Technical Evaluation of Integrated Wall and Roof Formwork System and Its Comparison with Ordinary Concrete Building Construction Method
198
Technical Evaluation of Low Pressure Irrigation Pipe (Hydroflume) and Comparison with Traditional and Sprinkler Irrigation Systems
199
Technical Evaluation of Miscible Gas Injection Methods; Case Study in an Iranian Heterogeneous Carbonate Reservoir
200
Technical evaluation of rural biogas installations in Tunisia
201
Technical evaluation of stand-alone solar powered membrane distillation systems Original Research Article
202
Technical Factors Associated with Polypharmacy Management Through Leavitt’s Sociotechnical Model
203
Technical factors in the creation of a “floppy” Nissen fundoplication
204
Technical failure investigation of welded structures (or how to get the most out of failures)
205
Technical feasibility and economic viability of a grid-connected PV installation for low cost electricity production
206
Technical feasibility and economic viability of a small-scale grid connected solar thermal installation for electrical-energy saving
207
Technical feasibility and financial analysis of hybrid wind–photovoltaic system with hydrogen storage for Cooma
208
Technical feasibility assessment of a solar chimney for food drying
209
Technical feasibility assessment of oleic sunflower methyl ester utilisation in Diesel bus engines
210
Technical feasibility of a three-axis force transducer for measuring pressure and friction on the model die surface — prototype development
211
Technical feasibility of reusing coal combustion by-products from a thermoelectric power plant in the manufacture of fired clay bricks
212
Technical feasibility of wavepower for seawater desalination using the hydro-ram (Hydram) Original Research Article
213
Technical feasibility study for coupling a desalination plant to an Advanced Heavy Water Reactor Original Research Article
214
Technical Feasibility Study of Energy Generation from the Tide in Southern Coasts of Iran Using Helical Turbines
215
Technical Feasibility Study of Geothermal Energy Use of Meshkinshahr Site for Greenhouse Heating
216
Technical feasibility study on polycarbonate solar panels
217
Technical feasibility, safety, and clinical outcome of stenting of unprotected left main coronary artery bifurcation narrowing
218
Technical features and experimental characterization of the IORT-1 system, a new IORT dedicated accelerator
219
Technical features and experimental characterization of the IORT-1 system, a new IORT dedicated accelerator
220
Technical features of the Time-of-Flight system for the PAMELA experiment in space
221
Technical features of the Time-of-Flight system for the PAMELA experiment in space
222
Technical forensic speaker recognition: Evaluation, types and testing of evidence
223
Technical grade paraffin waxes as phase change materials for cool thermal storage and cool storage systems capital cost estimation
224
Technical Impacts of Solar Photovoltaic Systems Integration into Malaysian Medium Voltage Reference Networks
225
Technical improvement in permanent seed implantation: a two-stage brachytherapy system. Description and comparison with current technique
226
Technical inefficiency and sustainability of rice production in the Fadama of niger state, southern guinea savanna of nigeria
227
Technical innovation: Intragastric Single Port Sleeve Gastrectomy (IGSG). A feasibility survival study on porcine model
228
Technical innovations drive the relationship between innovativeness and residual brain size in birds
229
Technical Innovations of Carinal Resection for Nonsmall-Cell Lung Cancer
230
Technical innovations, standardization and regional comparison — a case study in mobile communications
231
TECHNICAL INSTRUCTIONS IN ENGLISH: VOICES OF TECHNICAL LECTURERS
232
Technical issues associated with the control of steady state tokamaks
233
Technical issues of cross-language information retrieval: a review
234
Technical issues of fabrication technologies of reduced activation ferritic/martensitic steels
235
Technical issues of reduced activation ferritic/martensitic steels for fabrication of ITER test blanket modules
236
Technical issues related to the development of reduced-activation ferritic/martensitic steels as structural materials for a fusion blanket system
237
Technical justification of repairs to composite laminates
238
Technical justification of repairs to composite laminates
239
Technical knowledge and development. Observing aid projects and processes, Thomas Grammig (2002), London/New York: Routledge
240
Technical Knowledge and Information Gaps among Smallholder Farmers in the Production of Sugarcane in Kakamega County, Kenya
241
Technical knowledge as value added in business markets: Implications for procurement and marketing
242
Technical lay-out of the dynamic ergodic divertor
243
Technical limitations of lymph node mapping in pancreatic cancer
244
Technical magnetic resonance imaging : John A. Markisz and Michael Aquilia Stamford, CT: Appleton & Lange, 1996, 287 pages (price not given)
245
Technical management of RO system
246
Technical methods to improve yield, activity and stability in the development of microbial lipases
247
Technical modifications of ureteroneocystostomy in renal transplantation: an 18-year experience
248
Technical note – On optimization approach for multidisk vertical allocation problems
249
Technical Note : Construction of relief wells under artesian flow conditions at dam toes: engineering experiences from Karkheh earth dam, Iran
250
Technical Note : Repair effectiveness of CFRP and steel plates in RC beams with web opening: effect of plate thickness
251
Technical note a fast determination of Fe3+Fe2+ ratio in industrial minerals
252
Technical note A flow rule based on Huddlestons multiaxial rupture criterion as a yield function
253
Technical note A flow rule based on Huddlestons multiaxial rupture criterion as a yield function
254
Technical note a multiple linear correlation for diffuse radiation from global solar radiation and sunshine data over Egypt
255
Technical note A practical method for computation of ductile crack growth by means of finite elements and parametric SD-modelling
256
Technical note A practical method for computation of ductile crack growth by means of finite elements and parametric SD-modelling
257
Technical note A study on stress, reflection and double shot peening to inrease compressive residual stress
258
Technical note a study on the mixing characteristics of a packed flotation column
259
Technical note An approximation to solar cell equation for determination of solar cell parameters
260
Technical note Application of LBB to high energy pipings of a pressurized water reactor in Korea
261
Technical note Application of LBB to high energy pipings of a pressurized water reactor in Korea
262
Technical note Best connection scheme of collector modules of thermosyphon solar water heater operated at high temperatures
263
Technical note Bin weather data of Athens, Greece
264
Technical note bubble size measurement in flotation machines
265
Technical note Cold storage and autonomy in a three compartments photovoltaic solar refrigerator: experimental and thermodynamic study
266
Technical note Comparative study on the thermalperformances of solar air heater collectors with selectiveand nonselective absorber-plate
267
Technical note Copper oxide coatings for use in a linear solar Fresnel reflecting concentrating collector
268
Technical note Cr(VI) generation during milling
269
Technical note Database for assessing the life expectancy of pressure-retaining components in nuclear power plants
270
Technical note Database for assessing the life expectancy of pressure-retaining components in nuclear power plants
271
Technical note Design of a PLC system for automatic I-123 production
272
Technical note effect of level in separation tank on dow ncomer behaviour in a jameson cell
273
Technical note Estimation of electrical backup for solar box cooker
274
Technical Note Estimation of the Joint Roughness Coefficient (JRC) by Visual Comparison
275
Technical note gold losses from cyanide solutions part III: The recovery of absorbed gold from shale material
276
Technical note High-cycle fatigue crack initiation and propagation behaviour of high-strength sprin steel wires
277
Technical note Inspection and testing of unfired pressure vessels
278
Technical note Inspection and testing of unfired pressure vessels
279
Technical note Intelligent thermal energy meter cum controller for solar water heating systems
280
Technical note Liquid chromatographic analysis of the main pungent principles of solar dried West Indian ginger (Zingiber officinale Roscoe)
281
Technical note Measurement of global solar global photosynthetically-active and downward infrared radiations at Ilorin, Nigeria
282
Technical note Modelling of weather data for Oman
283
Technical note on a much simplified method for collecting ruminal fluid using a nylon paint strainer
284
Technical note on possible hydraulic control of the exchange through the Oxdjupet passage in the Baltic Sea
285
Technical note on symmetric duality in multiobjective programming: Some remarks on recent results
286
Technical note On the development of spatial+45 degree ruletemporal solar radiation maps: a Brazilian case study
287
Technical Note On the Initial Non-Linearity of Compressive Stress-Strain Curves for Intact Rock
288
Technical note on the joint receipt of quantities of a single good
289
Technical note on the paper “An empirical study of a new metaheuristic for the traveling salesman problem” (by Shigeru Tsubakitani, James R. Evans, European Journal of Operational Research 104 (1998) 113–128)
290
Technical Note on Using Intraoperative Smartphone Applications to Adjust Cup Inclination Angle during Total Hip Arthroplasty (THA)
291
Technical note Piping specific analysis of stresses due to thermal stratification
292
Technical note Piping specific analysis of stresses due to thermal stratification
293
Technical note Proper utilization of solar energy in Bangladesh: effect on the environment, food supply and the standard of living
294
Technical note Some new characteristics of El Nino events
295
Technical note study on the flotation selectivity of a problem phosphate ore
296
Technical note systematic behaviour in cluster radioactivity
297
Technical note the recovery of base metals by ion exchange resin
298
Technical note: A 23-year record of twice-weekly aerosol composition measurements at Mauna Loa Observatory
299
Technical note: A simplified procedure for myofibril hydrophobicity determination
300
Technical note: A tool for determining rotational tilt axis with or without fiducial markers
301
Technical note: A tool for determining rotational tilt axis with or without fiducial markers
302
Technical note: Acquisition of CT models for radiotherapy applications with reduced tube heating
303
Technical note: Advantages of the self-organizing controller for high-pressure sterilization equipments
304
Technical note: An improved estimate of uncertainty for source contribution from effective variance Chemical Mass Balance (EV-CMB) analysis
305
Technical note: Calibration of EVA methods for peak-over-threshold wind data using Bootstrapping
306
Technical note: Check software for use with trans-rectal ultrasound guided I-125 seed prostate implants
307
Technical note: Comparison between inverted absorber asymmetric and symmetric tubular-absorber compound parabolic concentrating solar collectors
308
Technical Note: Concepts for protection of EUVL masks from particle contamination
309
Technical note: Ergonomics, gerontechnology, and design for the home-environment
310
Technical note: Feeding zilpaterol hydrochloride to calf-fed Holstein steers improves muscle conformation of top loin steaks
311
TECHNICAL NOTE: Flood control device
312
TECHNICAL NOTE: Flood control device
313
Technical note: Improved analytical fit to the TG-43 radial dose function, g(r)
314
Technical note: Laboratory evaluation of a tunable diode laser system for eddy covariance measurements of ammonia flux
315
Technical note: measurement issues in taxonomic reliability
316
Technical note: On additivity of coagulation kernels
317
Technical note: Optimizing the thermohydraulic performance of flat-plate solar air heaters operating with fixed+45 degree rulevariable pumping power
318
Technical note: Performance study of a linear Fresnel concentrating solar device
319
Technical note: Performance study of the haamer gelatin pendulum current meter
320
Technical note: Revisiting the geometric theorems for volume averaging
321
Technical note: Simple models for estimating the total, diffuse, direct and normal solar irradiation in Bahrain
322
Technical note: Specific PCR amplification of protozoal 18S rDNA sequences from DNA extracted from ruminal samples of cows
323
Technical note: Techniques to obtain improved predictions of global radiation from sunshine duration
324
Technical note: the integral form of the transport equation with a moving boundary
325
Technical note: Time-resolved immunofluorometric assay for growth hormone in ruminants
326
Technical note: Use of near infrared reflectance spectroscopy to assess nitrogen and carbon fractions in dairy cow feces
327
Technical note: validation of a motion analysis system for measuring the relative motion of the intermediate component of a tripolar total hip arthroplasty prosthesis
328
Technical Note:Aquifer Parameter Estimation from Surface Resistivity Data
329
TECHNICAL NOTEA note on lead time and distributional assumptions in continuous review inventory models
330
Technical notes on endothelial progenitor cells: Ways to escape from the knowledge plateau
331
Technical Notes on the Near Surface Experiments of Submerged Submarine
332
Technical Notes on the Near Surface Experiments of Submerged Submarine
333
Technical notes on thoracic sympathectomy for essential hyperhidrosis: Reply
334
Technical optimisation of nitrate removal from ground water by electrodialysis using a pilot plant Original Research Article
335
Technical optimization of a batch olive wash wastewater treatment membrane plant Original Research Article
336
Technical optimization of a dual ultrafiltration and nanofiltration pilot plant in batch operation by means of the critical flux theory: A case study
337
Technical optimization of nitrate removal for groundwater by ED using a pilot plant Original Research Article
338
Technical optimization of the ITER ICRH decoupling and matching system
339
Technical options for optimization of production of Jatropha as a biofuel feedstock in arid and semi-arid areas of Zimbabwe
340
Technical options in venous valve reconstruction
341
Technical overview and first results of the half-size ITER NNBI source
342
Technical Overview of Digital Transmission of NTA Signal in Nigeria
343
Technical performance evaluation of ERP packages with twostage DEA approach
344
Technical performance evaluation of stand-alone photovoltaic array for outdoor field conditions of New Delhi
345
Technical performance evaluation of the potential biobased floor strippers
346
Technical plastics as PCDD/F absorbers
347
Technical Points in Vitamin D Measurement Assays
348
Technical possibility assessment of creating wind power station at Soltanieh zone of Zanjan province
349
Technical potential for developing natural gas use in the Brazilian red ceramic industry
350
Technical potential for photovoltaics on buildings in the EU-27
351
Technical principles of building for safety : Andrew Coburn, Richard Hughes, Antonios Pomonis and Robin Spence, Intermediate Technology Publications, London, 1995, 74 pp., n.p.
352
Technical problems from view point of agriculture in greening on an Arid Land Region
353
Technical procedures for recovery and evaluation of chemical spills on tundra
354
Technical progress and aggregate fluctuations
355
Technical progress, accumulation and financial constraints: is the productivity paradox really a paradox?
356
Technical progress, structural change, and the environmental Kuznets curve
357
Technical progresses for PVC production
358
Technical properties of compounded kaolin sample from Griva (Macedonia, Greece)
359
Technical quality evaluation of EEG recording based on electroencephalographers’ knowledge
360
Technical quality of dog food and salmon feed containing different bacterial protein sources and processed by different extrusion conditions
361
Technical Quality of Maternity Care: the Pregnant Women’s Perspective
362
Technical quality of root canal therapies performed by novice dental students in preclinical practice
363
Technical Quality of Root Canal Treatment Performed by Undergraduate Clinical Students of Isfahan Dental School
364
Technical quality of root canal treatment performed by undergraduate dental students
365
Technical Quality of Root Fillings Performed by Dental Students in Babol Dental School
366
Technical refinements of the vertical mammaplasty: A modified lejour approach
367
Technical reliability of the Greek coastal passenger fleet
368
Technical report: Radiation sensitivity testing by fluorescence in-situ hybridization: how many metaphases have to be analysed?
369
Technical report: the aluminium body of the Audi A8
370
Technical report: the aluminium body of the Audi A8
371
Technical Requirement of Clinical Decision Support system for Diabetic Patients
372
Technical requirements for economical viability of electricity generation in stabilized wind parks
373
Technical response to emergency planning following a landslide
374
Technical response to emergency planning following a landslide
375
Technical results from the surface run of the LUX dark matter experiment
376
Technical review and evaluation of the economics of water desalination: Current and future challenges for better water supply sustainability Original Research Article
377
Technical review of the Laboratory Biosphere closed ecological system facility Original Research Article
378
Technical review of wind energy potential as small-scale power generation sources in Penang Island Malaysia
379
Technical review on jet fuel production
380
Technical risk and new product success: An empirical test in high technology business markets
381
Technical risk involved in long-term operation of steam turbines
382
Technical risk involved in long-term operation of steam turbines
383
Technical sales engineer
384
Technical Services and Tenure: Impediments and Strategies
385
Technical services and the faculty client in the digital age
386
Technical Services Management, 1965–1990: A quarter century of change and a look to the future: Festschrift for Kathryn Luther Henderson : Edited by Linda C. Smith and Ruth C. Carter. New York: The Haworth Press, 1996. 370 pp. $39.95. ISBN 1-56024-960-9
387
Technical services on the net: where are we now? A comparative study of sixty web sites of academic libraries
388
Technical services productivity alternatives
389
Technical services redesign revisited: Librarian/vendor perspectives: A program sponsored by the ALCTS heads of technical services of medium sized academic libraries
390
Technical services task assignment: from macros to collection management intelligent agents
391
Technical Services Today and Tomorrow. In: Michael Gorman, Editor (2nd ed.), Libraries Unlimited, Englewood, CO (1998) ISBN 1-56308-590-9, p. 213 $38.50 ($46.00 outside North America).
392
Technical services: the other reader service
393
Technical session A wind effects on large structures
394
Technical session B: Wind effects on bridges
395
Technical Session C: Wind loads on low buildings
396
Technical session D: environmental & numerical problems
397
Technical Simulation Using Goldfish Bowl Method: A Medical Teaching Method for Increasing Student’s Creativity
398
Technical Skills for Weight Loss: Preliminary Data from a Randomized Trial
399
Technical solutions to reduce the risk of subsoil compaction: effects of dual wheels, tandem wheels and tyre inflation pressure on stress propagation in soil
400
Technical Specification Group Services and System Aspects, IP Multimedia Subsystem (IMS)
401
Technical specifications of matrix raw materials for Hatschek technology based fibrecement – A pragmatic approach
402
Technical Staff Positions and Technology related Tasks: A Study of University Libraries in Pakistan
403
Technical Standpoints in Tracheal Surgery
404
Technical structure of the global nanoscience and nanotechnology literature
405
Technical study on the Iranian Gilsonite as an additive for modification of asphalt binders used in pavement construction
406
Technical support facility
407
Technical tips associated with reduction in leak rate after laparoscopic sleeve gastrectomy: lessons to learn from a nested case–control study
408
Technical tips for laparoscopic gastric banding: 6 years’ experience in 2800 procedures by a single surgical team
409
Technical tools for regional seas management: the role of the Global Ocean Observing System (GOOS)
410
Technical trading can induce long-run memory in financial markets
411
Technical trading in the Santa Fe Institute Artificial Stock Market revisited
412
Technical trading revisited: False discoveries, persistence tests, and transaction costs
413
Technical trading rule profitability and foreign exchange intervention
414
Technical trading rules in the European Monetary System
415
Technical trading rules in the spot foreign exchange markets of developing countries
416
Technical traffic accident investigatorsʹ handbook: A level 3 reference, training and investigation manual : R.W. Rivers, with a foreword by M.J. Lofgren. Charles C. Thomas Books, 2600 South First, Springfield, Illinois 62794-9265. 1997 (2nd ed.)
417
Technical training, sponsored mobility, and functional differentiation: Elite formation in China in the reform era
418
Technical transfer in the mold industry: Grey theory and extension engineering
419
Technical Tricks to Facilitate Totally Endoscopic Major Pulmonary Resections
420
Technical tricks to improve the cosmetic results of breast-conserving treatment Technical tricks to improve the cosmetic results of breast-conserving treatment Technical tricks to improve the cosmetic results of breast-conserving treatment
421
Technical update on transumbilical breast augmentation
422
Technical variability of the GT3X accelerometer
423
TECHNICAL VOCATIONAL EDUCATION IN BRAZIL: THE CONTRACTORS’ PERCEPTIONS
424
Technical, allocative and economic efficiencies in swine production in Hawaii: a comparison of parametric and nonparametric approaches
425
Technical, allocative and economic efficiency of commercial poultry farms in Bangladesh
426
Technical, bioinformatical and statistical aspects of liquid chromatography–mass spectrometry (LC–MS) and capillary electrophoresis-mass spectrometry (CE-MS) based clinical proteomics: A critical assessment
427
Technical, economic and environmental analysis and optimization of steam injection gas turbine using PSO algorithm
428
Technical, economic and environmental analysis of energy production from municipal solid waste
429
Technical, Economic and Social Gaps and Information Needs among Smallholder Farmers in Practice of Ecological Organic Agriculture in Kenya
430
Technical, economical and social actions of farmers to mitigate water deficit in Tamaulipas, Mexico
431
Technical, economics and environmental analysis of semi-intensive shrimp (Litopenaeus vannamei) farming in Sonora, Sinaloa and Nayarit states, at the east coast of the Gulf of California, México
432
Technical, environmental and economic analysis of co-firing of gasified biofuel in a natural gas combined cycle (NGCC) combined heat and power (CHP) plant
433
Technical, environmental and exergetic aspects of hydrogen energy systems
434
Technical, environmental, and economic assessment of deploying advanced coal power technologies in the Chinese context
435
Technical, scale and allocative efficiencies of Turkish banking industry
436
Technical/economic/environmental analysis of biogas utilisation
437
Technical–economic analysis of including wind farms and HFC to solve hybrid TNEM–RPM problem in the deregulated environment
438
Technical-economic Analysis of the Organic Rankine Cycle with Different Energy Sources
439
Technical–economic analysis of wind-powered pumped hydrostorage systems. Part I: model development
440
Technical–economic analysis of wind-powered pumped hydrostorage systems. Part II: model application to the island of El Hierro
441
Technical–economic feasibility study of the installation of biodiesel from microalgae crops in the Atacama Desert of Chile
442
Technical-economic management of smart home energy system in the presence of stochastic and seasonal behavior of PV and EV
443
Technical-economic optimization of a wind power plant by means of a stochastic analytical model
444
Technical–economical analysis of the Saveh biogas power plant
445
Technically Efficient Targets for the Groups by Using the Centralized Scenario and Enhanced Russell Measure
446
Technically natural cosmological constant from supersymmetric 6D brane backreaction
447
Technically sound and sustainable Newcastle disease control in village chickens: lessons learnt over fifteen years
448
Technicism, reflective practice and authenticity in teacher education
449
Technicity as a Quality Indicator of Excellence in Gynaecology
450
Technico-economic simulation and optimization of a compression refrigerating machine
451
Technico-economic study of an industrial reverse osmosis desalination unit Original Research Article
452
Technicolour and precision electroweak data revisited
453
Technics in architecture: Cecil D. Elliot (MIT Press, Cambridge, MA, 1992), 456+ pages, $29.95
454
Technics, Precarity and Exodus in Rave Culture
455
Technihadron production and decay at LEP2
456
Technique « Prolink » pour la curiethérapie de bas débit de dose : résultats préliminaires de toxicité et d’efficacité
457
Technique « Prolink » pour la curiethérapie de bas débit de dose : résultats préliminaires de toxicité et d’efficacité
458
Technique and uses for absorbable barbed sutures
459
Technique d’association d’une RCMI et d’un faisceau cervico-susclaviculaire standard pour l’irradiation des cancers ORL
460
Technique d’association d’une RCMI et d’un faisceau cervico-susclaviculaire standard pour l’irradiation des cancers ORL
461
Technique Feasibility Study of Initiation of Electronic Commerce in Mazandaran Export Agencies by Using of AHP-FUZZY
462
Technique for 1st order design of a large-acceptance magnetic spectrometer
463
Technique for 1st order design of a large-acceptance magnetic spectrometer
464
Technique for a rapid and efficient purification of the SHV-1 and PSE-2 β-lactamases
465
Technique for aerosol generation with controllable micrometer size distribution Original Research Article
466
Technique for blood conservation in ABIOMED BVS 5000 ventricular assist device exchange
467
Technique for broadband correlated interference rejection in microphone arrays
468
Technique for calculating technological parameters of non-Newtonian liquids injection into oil well during workover
469
Technique for cladding of poison sheets for Cd-poisoned moderator
470
Technique for commissural alignment of the arterial trunks during orthotopic heart transplantation
471
Technique for Complete Subcoronary Implantation of the Medtronic Freestyle Porcine Bioprosthesis
472
Technique for constructing the pulmonary trunk for tetralogy of fallot with pulmonary atresia
473
Technique for Construction of an In Vivo Model of Simulated Pulmonary Metastases
474
Technique for contingency monitoring and voltage collapse prediction
475
Technique for delayed primary closure of fasciotomies
476
Technique for delayed primary closure of fasciotomies: The reply
477
Technique for delaying splashing in jet wiping process
478
TECHNIQUE FOR DESIGNING GEARBOX COUPLING BOLTS
479
TECHNIQUE FOR DESIGNING GEARBOX COUPLING BOLTS
480
TECHNIQUE FOR DETERMINING THE PRESSURE DISTRIBUTION ON THE FACE OF A CONTACT ULTRASONIC TRANSDUCER
481
Technique for developing highly strengthened and biaxially textured composite substrates for coated superconductor tapes Original Research Article
482
Technique for direct detection of weakly interacting massive particles using scintillation time discrimination in liquid argon
483
Technique for enhancing generation power density of silicon photovoltaic devices
484
TECHNIQUE FOR ESTIMATING THE REMAINING LIFE OF HYDRAULIC UNIT SEALS
485
TECHNIQUE FOR ESTIMATING THE REMAINING LIFE OF HYDRAULIC UNIT SEALS
486
Technique for extraanatomic bypass in complex aortic coarctation
487
Technique for finding the left anterior descending coronary artery
488
Technique for fractal image compression using genetic algorithm
489
Technique for gray-scale visual light and infrared image fusion based on non-subsampled shearlet transform
490
Technique for harvesting the radial artery as a coronary artery bypass graft
491
Technique for harvesting tibial cancellous bone modified for use in children
492
Technique for harveting keratolimbal allograft from corneocleral button
493
Technique for heterotopic pig heart xenotransplantation in primates
494
Technique for high-sensitivity “in vitro” wear measurement of UHMWPE hip joint liners using radioactive tracer technology
495
Technique For Image De-blurring Using Adaptive Wavelet Lagrange Fuzzy Filter
496
Technique for image fusion based on NSST domain improved fast non-classical RF
497
Technique for implantation of cardioverter defibrillators in the subpectoral position
498
Technique for implanting intramuscular electrodes in the diaphragm by videolaparoscopy in pigs
499
Technique for Insertion of the Inflow Cannula of the INCOR Left Ventricular Assist Device
500
Technique for intraoral inverted ‘L’ osteotomy
501
Technique for measurement of fluorescence lifetime by use of stroboscopic excitation and continuous-wave detection
502
Technique for measuring a reduction in systolic average transmural pressure
503
Technique for measuring longitudinal distribution of Raman gain characteristics in optical fibers
504
Technique for Measuring Moisture Storage Capacity at High Moisture Levels
505
Technique for measuring the deposition velocity of particulate matter to building surfaces
506
Technique for Measuring Thermophysical Properties of Refractory Metals at Supercritical Temperatures
507
Technique for monitoring ozone precursor hydrocarbons in air at photochemical assessment monitoring stations: Sorbent preconcentration, closed-cycle cooler cryofocusing, and GC-FID analysis
508
Technique for online prediction of voltage collapse
509
Technique for Personal Identification: Using the Extracted Index Finger Image to Identify Individuals
510
Technique for power ramp tests in the ISABELLE 1 loop of the OSIRIS reactor Original Research Article
511
Technique for rapid detection of phthalates in water and beverages Original Research Article
512
Technique for Reconstruction of the Sinotubular Junction
513
Technique for repair of decemet membrane detachment
514
Technique for repair of single-ventricle hearts with transposition of the great arteries and aortic arch hypoplasia
515
Technique for replacing the mitral valve with a pulmonary autograft: the Ross-Kabbani operation
516
Technique for selecting capsular tightness in repair of anterior-inferior shoulder instability
517
Technique for the characterization of discharges in micro-strip gas chambers
518
Technique for the characterization of discharges in micro-strip gas chambers
519
Technique for the computation of lower leg muscle bulk from magnetic resonance images
520
Technique for the control of spheroid diameter using microfabricated chips
521
Technique for the measurement of dimensional changes of natural microfibril materials under variable humidity environments
522
Technique for the measurement of hindfoot inversion and eversion and its use to study a normal population
523
technique for the rapid diagnosis of atrial tachycardi in the electrophysiology laboratory
524
Technique for the Repair of Diaphragmatic Eventration
525
Technique for uniform reduction of macroglossia
526
Technique for voltage stability assessment using newly developed line voltage stability index
527
Technique images proteins in living cell membranes: Characterization
528
Technique issues in nonsurgical filling of the periorbital hollows
529
Technique issues in nonsurgical filling of the periorbital hollows reply
530
Technique mono-isocentrique en radiothérapie conformationelle dans le traitement du cancer du nasopharynx : expérience du service de radiothérapie de l’EHS Emir-Abdelkader du centre de lutte contre le cancer d’Oran
531
Technique mono-isocentrique en radiothérapie conformationelle dans le traitement du cancer du nasopharynx : expérience du service de radiothérapie de l’EHS Emir-Abdelkader du centre de lutte contre le cancer d’Oran
532
Technique mono-isocentrique : mise en place pour la radiothérapie adjuvante des cancers du sein dans un centre
533
Technique mono-isocentrique : mise en place pour la radiothérapie adjuvante des cancers du sein dans un centre
534
Technique of Aluminum Alloy Composite by Inversion Casting
535
Technique of anaesthesia for different grades of caesarean section: A cross-sectional study
536
Technique of checking missed eigenvalues for eigenproblem with damping matrix
537
Technique of concomitant fine wire electromyography of the psoas major and the iliacus
538
Technique of controlled reperfusion of the transplanted lung in humans
539
Technique of Ghost (Khatith) Ileostomy: Our Experience and Guidelines
540
Technique of in-Advance Detection of Aquiferous Structures in the Front of Excavation Working Face by Direct Current Electric Method
541
Technique of Lung Retraction During Internal Mammary Artery Harvesting
542
Technique of lymphatic mapping and sentinel node biopsy for melanoma
543
Technique of multipulse gas load fracturing
544
Technique of Posterior Mitral Valve Restoration
545
Technique of Right Heart Protection and Deairing During Heartmate Vented Electric LVAD Implantation
546
Technique of sentinel node biopsy in breast cancer
547
Technique of sentinel node resection in melanoma and breast cancer: Probe-guided surgery and lymphatic mapping
548
Technique of supported liquid membranes (SLMs) for the facilitated transport of vanadium ions (VO2+): Parameters and mechanism on the transport process Original Research Article
549
Technique of top coal caving with vibration
550
Technique of using the St. Jude aortic connector with the radial artery
551
Technique potential for classification of honey by electronic tongue Original Research Article
552
Technique sensitivity associated with air-drying of HEMA-free, single-bottle, one-step self-etch adhesives
553
Technique sensitivity of water-free one-step adhesives
554
Technique to alter field of view during vitrectomy with phacoemulification and apiration in ga-filled eye
555
Technique to Assess Aging of Propellant Grain
556
TECHNIQUE TO ASSESS THE RESIDUAL PRESTRESS IN PRESTRESSED CONCRETE MEMBERS
557
Technique to automate measurement of water overflow rate in frother characterization testing
558
Technique to Avoid Innominate Artery Ligation and Perform an Anterior Mediastinal Tracheostomy for Residual Trachea of Less Than 5 cm
559
Technique to determine contamination exposure routes and the economic efficiency of folded paper-towel dispensing
560
Technique to encapsulate a low molecular weight hydrophilic drug in biodegradable polymer particles in a liquid–liquid system
561
Technique to evaluate impact of new technology on operator time loading
562
Technique to evaluate nodal reliability indices and nodal prices of restructured power systems
563
Technique to measure CO2 mixing ratio in small flasks with a bellows/IRGA system
564
Technique to measure lumbar curvature in the ergonomic evaluation of chairs: description and validation
565
Technique to Measure Surface-Fouling Tendencies of Steepwater from Corn Wet Milling.
566
Technique to protect the internal mammary artery pedicle
567
Technique to repair tetralogy of fallot with absent pulmonary valve
568
Technique validation by liquid chromatography for the determination of acyclovir in plasma
569
Technique without theory or theory from technique? An examination of practical, philosophical, and foundational issues in data mining
570
Techniques and applications for predictive metallurgy and ore characterization using optical image analysis
571
Techniques and applications of computation slicing
572
Techniques and Benefits of Multiple Internal Mammary Artery Bypass at 20 Years of Follow-Up
573
Techniques and complications of ileostomy takedown
574
Techniques and complications of laparoscopy-assisted distal gastrectomy (LADG) for gastric cancer
575
Techniques and detectors for polarimetry in X-ray astronomy
576
Techniques and detectors for polarimetry in X-ray astronomy
577
Techniques and innovations in liver surgery
578
Techniques and methods in ground-based observation of Mercury
579
Techniques and Performance of Post-Prestressed Tunnel Liner
580
Techniques and practice of chromatography: R.P.W. Scott, Marcel Dekker, New York, 1995 (ISBN 0-8247-9460-5). xii + 395 pp. price US $ 115.00
581
Techniques and principles of tuberosity fixation for proximal humeral fractures treated with hemiarthroplasty
582
Techniques and results for the direct detection of dark matter (review)
583
Techniques and results for the direct detection of dark matter (review)
584
Techniques characterizing the coronary atherosclerotic plaque: influence on clinical decision making?
585
Techniques classique bidimensionnelle et mono-isocentrique tridimensionnelle dans l’irradiation du sein et des aires ganglionnaires : comparaison dosimétrique
586
Techniques Employed in Production of Traditional Vaccines Commonly Used by Military Forces: A Review
587
Techniques for absolute capacity determination in railways
588
Techniques for accuracy assessment of tree locations extracted from remotely sensed imagery
589
Techniques for accurate performance evaluation in architecture exploration
590
Techniques for adding useful functions to carbon surfaces by cold plasmas
591
Techniques for analysing Late Cenozoic river terrace sequences
592
Techniques for analytical testing of unconventional samples
593
Techniques for analyzing literature search results
594
Techniques for analyzing the early stages of crystallization reactions
595
Techniques for assessing the effects of uncertainties in thermodynamic models and data
596
Techniques for assessment of wear between human cartilage surfaces
597
Techniques for augmentation of exogenous DNA uptake by ovine spermatozoa
598
Techniques for autologous transplants
599
Techniques for available bandwidth measurement in IP networks: A performance comparison
600
Techniques for averting and correcting errors in 3D terrain topology measurements
601
Techniques for biological characterization of tissue-engineered tendon and ligament
602
Techniques for buckling experiments on steel silo transition junctions
603
Techniques for CAD reconstruction of `as-builtʹ environments and application to preparing for dismantling of plants Original Research Article
604
Techniques for calibrating spindles with nanometer error motion
605
Techniques for cash management in scheduling manufacturing operations
606
Techniques for characterization of polyamide thin film composite membranes Original Research Article
607
Techniques for Classroom Interaction
608
Techniques for Combining American and British Food Composition Data on Specific Carbohydrates
609
Techniques for computational fluid dynamics modelling of flow in membrane channels
610
Techniques for controlling bivariate grouped observations
611
Techniques for controlling stage structure of metal chloride-GIC
612
Techniques for delivery and monitoring of TOOKAD (WST09)-mediated photodynamic therapy of the prostate: Clinical experience and practicalities
613
Techniques for detailed heat transfer measurements in cold supersonic blowdown tunnels using thermochromic liquid crystals
614
Techniques for determination of trace metals in small samples of size-fractionated particulate matter: phytoplankton metals off central California
615
Techniques for Dispersion of Microorganisms into Air
616
Techniques for effective simulation, optimization, and uncertainty quantification of the in-situ upgrading process
617
Techniques for Efficient Case Retrieval and Rainfall Prediction Using CBR and Fuzzy Logic
618
Techniques for enhancing real-time CORBA quality of service
619
Techniques for evaluating harmonic distortion in class-AB output stages: A tutorial
620
Techniques for evaluating selected reproductive disorders of stallions
621
Techniques for evaluating the performance of landslide susceptibility models
622
Techniques for extraction of bioactive compounds from plant materials: A review Original Research Article
623
Techniques for Fast and Sensitive Measurements of Two-Dimensional Birefringence Distributions
624
Techniques for finding similarity knowledge in OLAP reports
625
Techniques for framing questions in conducting family meetings in palliative care
626
Techniques for gas chromatography of volatile terpenoids from a range of matrices
627
Techniques for generating 3-D EBSD microstructures by FIB tomography
628
Techniques for generic probabilistic inversion
629
Techniques for GIS modeling of coastal dunes
630
Techniques for Handling Missing Data in Secondary Analyses of Large Surveys
631
TECHNIQUES FOR HAPLOID AND DOUBLED HAPLOID PRODUCTION
632
Techniques for high quality Arabic speech synthesis
633
Techniques for high-efficient development of offshore fluvial oilfields
634
Techniques for high-frequency integrated test and measurement
635
Techniques for high-performance computational steering
636
Techniques for image enhancement and segmentation of tomographic images of porous materials
637
Techniques for improving or replacing ageing on lees of oak aged red wines: The effects on polysaccharides and the phenolic composition
638
Techniques for improving response rates in OM survey research
639
Techniques for improving the cosmetic outcome of breast conservation surgery
640
Techniques for in-band phase noise reduction in (delta)(sigma) synthesizers
641
Techniques for including large deformations associated with salt and fault motion in basin modeling
642
Techniques for injection of pre-characterized dust into the scrape-off layer of fusion plasma
643
Techniques for input ripple current cancellation: classification and implementation [in SMPS]
644
Techniques for introscopy of condense matter in terahertz spectral region
645
Techniques for introscopy of condense matter in terahertz spectral region
646
Techniques for jar formation of valve-regulated lead–acid batteries
647
Techniques for laparoscopic liver parenchymal transection
648
Techniques for localisation of konjac glucomannan in model milk protein–polysaccharide mixed systems: Physicochemical and microscopic investigations
649
Techniques for managing planar daylight data
650
Techniques for mapping tasks to machines in heterogeneous computing systems
651
Techniques for measurement of droplet size and velocity distributions in agricultural sprays
652
Techniques for measuring atmospheric aerosols at the high resolution fly’s eye experiment
653
Techniques for measuring gas emissions from a composting stockpile of cattle manure
654
Techniques for measuring particle size distribution of particulate matter emitted from animal feeding operations
655
Techniques for measuring surface forces
656
Techniques for measuring the composition of hydrogenated amorphous silicon–germanium alloys
657
Techniques for measuring the elastic wave velocities of melts and partial molten systems under high pressure conditions Original Research Article
658
Techniques for measuring the thermal conductivity of nanofluids: A review
659
Techniques for measuring weight bearing during standing and walking
660
Techniques for mechanical stimulation of cells in vitro: a review
661
Techniques for methods of collection, database management and distribution of agrometeorological data
662
Techniques for microstructural characterization of powder-processed nickel-based superalloys
663
Techniques for microstructural characterization of powder-processed nickel-based superalloys
664
Techniques for monitoring coastal change: a review and case study
665
Techniques for obtaining the monthly mean hourly diffuse radiation from daily values
666
Techniques for one-loop calculations in constrained differential renormalization Original Research Article
667
Techniques for Ovarian Tissue, Whole Ovary, Oocyte and Embryo Cryopreservation
668
Techniques for Ovarian Tissue, Whole Ovary, Oocyte and Embryo Cryopreservation
669
Techniques for parallel quasi-Monte Carlo integration with digital sequences and associated problems Original Research Article
670
Techniques for patterning and guidance of primary culture neurons on micro-electrode arrays
671
Techniques for performance optimisation of particle collection systems
672
Techniques for performing caesarean section
673
Techniques for Planning and Control Dependent on Different Types of Flexibility
674
Techniques for preserving and determining aluminium fractions in soil solution from podzolic forest soils
675
Techniques for prevention of pancreatic leak after pancreatectomy
676
Techniques for quantitative analyses of calcareous marine phytoplankton
677
Techniques for Realistic Visualization of Fluids: A Survey
678
Techniques for reducing false alarms in infrared forest-fire automatic detection systems
679
Techniques for restricting multiple overtaking conflicts and performing compound moves when constructing new train schedules
680
Techniques for scheduling with rejection
681
Techniques for simultaneous quantification of wind and water erosion in semi-arid regions
682
Techniques for soft tissue management around the implants: a review
683
Techniques for sperm clean-up and selection of stallion spermatozoa
684
Techniques for stimulated Raman excitation and CARS detection of radicals created by photodissociation
685
Techniques for tailored porosity in MgO targets
686
Techniques for Teaching HIV Counseling: An Intensive Experiential Model
687
TECHNIQUES FOR TESTING THIN FILMS IN TENSION
688
Techniques for the application of the analytical solution to the multicylinder somatic shunt cable model for passive neurones
689
Techniques for the assessment of influence in DEA
690
Techniques for the creation of digital watermarks in sequential circuit designs
691
Techniques for the detection of second sound shock pulses and induced quantum turbulence in He II Original Research Article
692
Techniques for the Determination of Cyanide in a Process Environment: A Review
693
Techniques for the differentiation of carbon types present in lignite-rich mine soils
694
Techniques for the evaluation of maturity for composts of industrially contaminated lake sediments
695
Techniques for the measurement of common mode noise in binary read-out systems
696
Techniques for the measurement of common mode noise in binary read-out systems
697
Techniques for the placement of hepatic artery catheters for regional chemotherapy in unresectable liver metastases
698
Techniques for the Preparation of Porous Metals
699
Techniques for the study of reaction kinetics at low temperatures: application to the atmospheric chemistry of Titan
700
Techniques for the systematic treatment of certain coupled problems
701
Techniques for the thin film growth of La1−xSrxCrO3 for solid state ionic devices
702
Techniques for the Visualization of Topological Defect Behavior in Nematic Liquid Crystals
703
Techniques for transformation of biogas to biomethane
704
Techniques for trapping ammonia generated from urea treatment of barley straw
705
Techniques for validating the historic record of lake sediments. A demonstration of their use in the English Lake District
706
Techniques in a pseudocorporate environment [engineering education]
707
Techniques in managing proximal humeral malunions
708
Techniques in matroid reconstruction Original Research Article
709
Techniques in the management of juxta-articular aggressive and recurrent giant cell tumors around the knee
710
Techniques of applying wavelet transform into combined model for short-term load forecasting
711
Techniques of assisted reproduction
712
Techniques of controlling hydrodynamic size of ferrofluid of gelatin-coated magnetic iron oxide nanoparticles
713
Techniques of CT Colonography (Virtual Colonoscopy)
714
Techniques of CT Colonography (Virtual Colonoscopy)
715
Techniques of Eigenvalues Estimation and Association,
716
Techniques of Eyebrow Lifting: A Narrative Review
717
Techniques of ground-water recharge estimates in arid/semi-arid areas, with examples from Abu Dhabi
718
Techniques of Identifying Icing and De-Icing of Wind Turbines
719
Techniques of Male Circumcision
720
Techniques of Network Reconfiguration for Service Restoration in Shipboard Power System: A Review
721
Techniques of patient-oriented research : Charles Y. C. Pak, Perrie M. Adams (editors). Raven Press, 1994
722
Techniques of Reconstruction for Inadequate Donor Left Atrial Cuff in Lung Transplantation
723
Techniques of replica symmetry breaking and the storage problem of the McCulloch–Pitts neuron
724
Techniques of replica symmetry breaking and the storage problem of the McCulloch–Pitts neuron
725
Techniques of signal generation required for electropermeabilization: Survey of electropermeabilization devices
726
Techniques of spatially explicit individual-based models: construction, simulation, and mean-field analysis
727
Techniques of spatially explicit individual-based models: construction, simulation, and mean-field analysis
728
Techniques of Successful Application of Factor Analysis in Software Measurement
729
Techniques of Teaching Professional Vocabulary with special reference to Vocabulary used in Media
730
Techniques of the FLASH thin target experiment
731
Techniques of the FLASH thin target experiment
732
Techniques of Transmitting Beamforming to Control the Generated Weights
733
Techniques to accelerate BEM computation to provide virtual reality update of stress solutions
734
Techniques to accelerate convergence of stress-controlled molecular dynamics simulations of dislocation motion
735
Techniques to address the malar fat pad
736
Techniques to alleviate the effects of view aliasing artifacts in computed tomography
737
Techniques to alleviate the effects of view aliasing artifacts in computed tomography
738
Techniques to assess cross-border air pollution and application to a US-Mexico border region
739
Techniques to audit and certify the long-term integrity of digital archives
740
Techniques to carry weight loads and resist against bending in conical shells, cases in Kashan
741
Techniques to characterize fatigue behaviour of full size drill pipes and small scale samples
742
Techniques to control the electricity generation in a series hybrid electrical vehicle
743
Techniques to determine ignition, flame stability and burnout of blended coals in p.f. power station boilers
744
Techniques to improve the CLEAN deconvolution algorithm
745
Techniques to improve the usability of nickel–hydrogen cells
746
Techniques to increase the schedulable utilization of cache-based preemptive realtime systems
747
Techniques to investigate cellular and molecular interactions in the host response to implanted biomaterials
748
Techniques to measure dynamic surface tension
749
Techniques to Reduce the Impact of Asulam Drift from Helicopter Sprayers on Native Vegetation
750
Techniques to reduce the peel stresses in adhesive joints with composites
751
Techniques to Support Successful Strategic Project Management in the UK Upstream Oil and Gas Sector
752
Techniques to suppress intermediate density in topology optimization of compliant mechanisms
753
Techniques used for determining cure kinetics of rubber compounds
754
Techniques, applications and future prospects of diamond anvil cells for studying supercritical water systems
755
Techniques/scattering
756
Techniques/Scattering
757
TECHNIQUES: A MULTIPLEXED GRATING SHEARING INTERFEROMETER FOR REFLECTION MOIRÉ ANALYSIS OF PARTIAL SLOPES AND CURVATURES OF BENT PLATES
758
TECHNIQUES: EXPERIMENTAL MODAL ANALYSIS OF TIRES
759
TECHNIQUES: NONDESTRUCTIVE EVALUATION OF TREES
760
Techno Economic and Life Cycle Cost Assessment of the CCHP/ PV Hybrid System Application
761
Techno economic evaluation for the treatment of pesticide industry effluents using membrane schemes Original Research Article
762
Techno therapy or nurtured niches? Technology studies and the evaluation of radical innovation
763
Techno-commercial perspective study for sintered fly ash light-weight aggregates in India
764
Technoculture Approach in Facing the Transnational Threat
765
Techno-Econo-Environmental study on the use of domestic-scale wind turbines in Iran
766
Techno-economic analysis and environmental impact of fuel economy labels for passenger cars in Indonesia
767
Techno-economic analysis and optimization of the heat recovery of utility boiler flue gas
768
Techno-economic analysis between the performances of heat source air conditioners in South Africa
769
Techno-economic analysis for a sugarcane biorefinery: Colombian case
770
Techno-economic analysis for brewer’s spent grains use on a biorefinery concept: The Brazilian case
771
Techno-economic analysis of a biodiesel production process from vegetable oils
772
Techno-economic analysis of a CO2 capture plant integrated with a commercial scale combined cycle gas turbine (CCGT) power plant
773
Techno-economic analysis of a coal-fired CHP based combined heating system with gas-fired boilers for peak load compensation
774
Techno-Economic Analysis of a Grid-Connected Hybrid Energy System for Developing Regions
775
Techno-economic analysis of a hybrid mini-grid system for Fiji islands
776
Techno-economic analysis of a multi-stage stacked tray (MSST) solar still
777
Techno-economic analysis of a plastic cover solar air heater
778
Techno-economic analysis of a roof-integrated solar air heating system for drying fruit and vegetables
779
Techno-economic analysis of a two-step biological process producing hydrogen and methane
780
Techno-economic analysis of a wind–solar hybrid renewable energy system with rainwater collection feature for urban high-rise application
781
Techno-economic analysis of ammonia production via integrated biomass gasification
782
Technoeconomic analysis of an integrated microalgae photobioreactor, biodiesel and biogas production facility
783
Techno-economic analysis of an optimized photovoltaic and diesel generator hybrid power system for remote houses in a tropical climate
784
Techno-economic analysis of autonomous PV-wind hybrid energy systems using different sizing methods
785
Techno-economic analysis of autotrophic microalgae for fuel production
786
Techno-economic analysis of biodiesel production from Jatropha curcas via a supercritical methanol process
787
Techno-economic analysis of bioethanol production from lignocellulosic residues in Colombia: A process simulation approach
788
Technoeconomic analysis of biofuels: A wiki-based platform for lignocellulosic biorefineries
789
Techno-economic analysis of biomass to transportation fuels and electricity via fast pyrolysis and hydroprocessing
790
Techno-economic analysis of biooil production process from palm empty fruit bunches
791
Techno-economic analysis of chemical looping combustion with humid air turbine power cycle
792
Techno-economic analysis of co-fired biomass integrated gasification/combined cycle systems with inclusion of economies of scale
793
Techno-economic analysis of corn stover fungal fermentation to ethanol
794
Technoeconomic analysis of five microalgae-to-biofuels processes of varying complexity
795
Techno-Economic Analysis of Flare Gas to Gasoline (FGTG) Process through Dimethyl Ether Production
796
Techno-economic analysis of fuel cell auxiliary power units as alternative to idling
797
Techno-economic analysis of grid-connected battery storage
798
Techno-Economic Analysis of Heavy Fuel Oil Hydrodesulfurization Process for Application in Power Plants
799
Techno-economic analysis of integrating sweet sorghum into sugar mills: The Central American case
800
Techno-economic analysis of integrating the methane oxidative coupling and methane reforming processes
801
Technoeconomic analysis of large scale production of pre-emergent Pseudomonas fluorescens microbial bioherbicide in Canada
802
Techno-economic analysis of liquid fuel production from woody biomass via hydrothermal liquefaction (HTL) and upgrading
803
Techno-economic analysis of monosaccharide production via fast pyrolysis of lignocellulose
804
Technoeconomic analysis of once through long tube MSF process for high capacity desalination plants Original Research Article
805
Techno-economic analysis of PEM fuel cells role in photovoltaic-based systems for the remote base stations
806
Techno-economic analysis of RES & hydrogen technologies integration in remote island power system
807
Techno-economic Analysis of Small Scale Electricity Generation from the Lignocellulosic Biomass
808
Techno-economic analysis of solar parabolic trough type energy system for garment zone of Jaipur city
809
Techno-economic analysis of stand-alone hybrid photovoltaic–diesel–battery systems for rural electrification in eastern part of Iran—A step toward sustainable rural development
810
Techno-economic analysis of succinic acid production using adsorption from fermentation medium
811
Techno-economic analysis of the coal-to-olefins process in comparison with the oil-to-olefins process
812
Techno-economic analysis of the energy exploitation of biomass residues in Heraklion Prefecture—Crete
813
Techno-economic analysis of the integration of hydrogen energy technologies in renewable energy-based stand-alone power systems
814
Techno-economic analysis of the Jordanian solar water heating system
815
Techno-economic analysis of transportation fuels from defatted microalgae via hydrothermal liquefaction and hydroprocessing
816
Techno-economic analysis of tube bundle orientation for high capacity brine recycle MSF desalination plants Original Research Article
817
Techno-economic analysis of using corn stover to supply heat and power to a corn ethanol plant – Part 1: Cost of feedstock supply logistics
818
Techno-economic analysis of using corn stover to supply heat and power to a corn ethanol plant – Part 2: Cost of heat and power generation systems
819
Techno-economic analysis of wastewater sludge gasification: A decentralized urban perspective
820
Technoeconomic analysis of wheat straw densification in the Canadian Prairie Province of Manitoba
821
Techno-economic analysis of wood biomass boilers for the greenhouse industry
822
Techno-economic and behavioural analysis of battery electric, hydrogen fuel cell and hybrid vehicles in a future sustainable road transport system in the UK
823
Techno-Economic and Environmental Analyses of Digestate Treatment after Anaerobic Digestion Process
824
Techno-economic and Environmental Analysis of Floating Photovoltaic Power Plants: A case Study of Iran
825
Techno-economic and environmental evaluation of demand side management techniques for rural electrification in Ibadan, Nigeria
826
Techno-Economic and Environmental Evaluation of Expansion Turbines for Gas Field Improvement (Case study)
827
Techno-economic and environmental evaluations of large scale gasification-based CCS project in Romania
828
Techno-economic and environmental risk analysis for advanced marine propulsion systems
829
TECHNO-ECONOMIC AND ENVIRONMENTAL STUDY FOR BAGASSE DRIVEN ETHANOL - A CASE STUDY
830
Techno-Economic and Exergetic Analysis and Optimization of Integrated MED- RO Desalination System in the Genaveh Combined Cycle Power Plant
831
Techno-Economic and Life Cycle Analysis of Energy Generation Using Concentrated Solar Power (CSP) Technology in Sokoto State. Nigeria
832
Techno-economic and social analysis of energy storage for commercial buildings
833
Technoeconomic appraisal of a ground source heat pump system for a heating season in eastern Turkey
834
Techno-economic appraisal of an integrated collector/storage solar water heater
835
Techno-economic assessment and environmental impacts of desalination technologies Original Research Article
836
Techno-economic assessment and optimization of Stirling engine micro-cogeneration systems in residential buildings
837
Techno-economic assessment and policy of gas power generation considering the role of multiple stakeholders in China
838
Technoeconomic assessment and strategic analysis of heat and power co-generation (CHP) from biomass in Greece
839
Techno-economic assessment model of screening step of agricultural wastes recycling to animal feed project
840
Technoeconomic assessment of a building-integrated PV system for electrical energy saving in residential sector
841
Technoeconomic assessment of a hybrid solar/wind installation for electrical energy saving
842
Techno-economic assessment of a stand-alone PV/hybrid installation for low-cost electrification of a tourist resort in Greece
843
Techno-economic assessment of biofuel development by anaerobic digestion of European marine cold-water seaweeds
844
Techno-economic assessment of biomass slow pyrolysis into different biochar and methanol concepts
845
Technoeconomic assessment of biomass to energy
846
Techno-economic assessment of biomass-to-ethanol by indirect fluidized bed gasification: Impact of reforming technologies and comparison with entrained flow gasification
847
Techno-economic assessment of carbon-negative algal biodiesel for transport solutions
848
Techno-economic Assessment of Coal to SNG Power Plant in Kalimantan
849
Techno-Economic Assessment of Different Inlet Air Cooling Systems in Warm Dry Wet Climate Stations
850
Techno-economic assessment of energy production potential from tidal streams in Nigeria
851
Techno-economic assessment of fossil fuel power plants with CO2 capture – Results of EU H2-IGCC project
852
Techno-economic assessment of gasification as a process step within biomass-to-liquid (BtL) fuel and chemicals production
853
TechnoEconomic Assessment of Heat Recovery in Series Condensers Arrangement: Hot and Humid Regions
854
Techno-economic assessment of high efficient energy production (SOFC-GT) for residential application from natural gas
855
Techno-economic assessment of hydrogen production from underground coal gasification (UCG) in Western Canada with carbon capture and sequestration (CCS) for upgrading bitumen from oil sands
856
Techno-economic assessment of hydrogen production processes for the hydrogen economy for the short and medium term
857
Techno-Economic Assessment of Implementing Concentrated Solar Power Technology in the Palestinian Territories
858
Techno-economic assessment of lightweight and zero emission vehicles deployment in the passenger car fleet of developing countries
859
Techno-economic assessment of micro-algae as feedstock for renewable bio-energy production
860
Techno-economic assessment of municipal solid waste management in Jordan
861
Technoeconomic assessment of phenanthrene degradation by Pseudomonas stutzeri CECT 930 in a batch bioreactor
862
Technoeconomic assessment of potential processes for bio-ethylene production
863
Techno-economic assessment of recycling acidic sludge project of reprocessing industries to value-added gaseous products using Plasmatron
864
Techno-economic assessment of recycling practices of municipal solid wastes in Cyprus
865
Techno-Economic Assessment of Removing BTEX Pollutants by Designing Thermal Oxidation Unit in a Bituminous Waterproofing Factory in Iran
866
Techno-Economic Assessment of the AHP Based Selected Method for Separating Formic Acid from an Aqueous Effluent
867
Techno-economic assessment of triticale straw for power generation
868
Techno-economic assessment of VOC-emission reduction strategies based on the ARGUS model
869
Techno-Economic Assessment Power Supply in Offshore Platform by Renewable and Conventional Source
870
Techno-economic comparison between different technologies for a CCS power generation plant integrated with a sub-bituminous coal mine in Italy
871
Techno-economic comparison of a biological hydrogen process and a 2nd generation ethanol process using barley straw as feedstock
872
Techno-economic comparison of energy storage systems for island autonomous electrical networks
873
Techno-economic comparisons of hydrogen and synthetic fuel production using forest residue feedstock
874
Techno-economic databases in the context of integrated assessment modelling
875
Techno-economic Efficiency of Trunk and Mechanical Harvest Aid Shakers for Harvesting Olive Fruits in Guilan Province, Iran
876
Techno-economic evaluation for development of onshore carbon dioxide pipeline networks
877
Techno-economic evaluation for the heat integration of vaporisation cold energy in natural gas processing
878
Techno-economic evaluation of a PVAm CO2-selective membrane in an IGCC power plant with CO2 capture
879
Techno-economic evaluation of a solar powered water desalination plant
880
Techno-economic evaluation of advanced IGCC lignite coal fuelled power plants with CO2 capture
881
Techno-economic evaluation of bioethanol production from three different lignocellulosic materials
882
Techno-economic evaluation of biohydrogen production from wastewater and agricultural waste
883
Techno-economic evaluation of coal-based polygeneration systems of synthetic fuel and power with CO2 recovery
884
Techno-economic evaluation of coal-to-liquids (CTL) plants with carbon capture and sequestration
885
Techno-economic evaluation of concentrating solar power generation in India
886
Techno-economic evaluation of domestic solar water heating systems in India
887
Technoeconomic evaluation of IGCC power plants for CO2 avoidance
888
Techno-economic evaluation of masonry type animal feed solar cooker in rural areas of an Indian state Rajasthan
889
Techno-economic evaluation of membrane filtration for the recovery and re-use of tanning chemicals
890
Techno-economic evaluation of off-grid hybrid photovoltaic–diesel–battery power systems for rural electrification in Saudi Arabia—A way forward for sustainable development
891
Techno-economic evaluation of small hydro power plants in Greece: a complete sensitivity analysis
892
Techno-economic evaluation of soil-aquifer treatment using primary effluent at Ahmedabad, India
893
Techno-economic evaluation of the evaporative gas turbine cycle with different CO2 capture options
894
Techno-economic evaluation of the integrated biosorption–pyrolysis technology for lead (Pb) recovery from aqueous solution
895
Techno-economic evaluation of thermo-chemical biomass-to-ethanol
896
Techno-economic evaluations of a generic wood-to-ethanol process: effect of increased cellulose yields and enzyme recycle
897
Techno-Economic Feasibility and Flowsheet Synthesis of Scrap Tire/Plastic Waste Liquefaction
898
Techno-Economic Feasibility and Flowsheet Synthesis of Scrap Tire/Plastic Waste Liquefaction
899
Techno-economic feasibility of absorption heat pumps using wastewater as the heating source for desalination Original Research Article
900
Techno-economic feasibility of energy supply of remote villages in Palestine by PV-systems, diesel generators and electric grid
901
Techno-economic feasibility of high-temperature high-lift chemical heat pumps for upgrading industrial waste heat
902
Techno-economic Feasibility Study of the Gunde Teklehaymanote Micro-hydropower Plant at Tindwat River, Central Gondar, Ethiopia
903
Techno-Economic Impact of Electrification Rural Areas in Palestine using Micro-Grid Solar Energy “Al-Mkahel& Saeed Villages – Case Study”
904
Techno-economic impacts of shale gas on cellulosic biofuel pathways
905
Techno-economic implications of improved high gravity corn mash fermentation
906
Techno-economic investigation of alternative propulsion plants for Ferries and RoRo ships
907
Techno-economic modelling of a solid oxide fuel cell stack for micro combined heat and power
908
Techno-economic operation optimization of a HRSG in combined cycle power plants based on evolutionary algorithms: A case study of Yazd, Iran
909
Techno-economic optimisation of hydrogen production by PV – electrolysis: “RenHydrogen” simulation program
910
Techno-Economic Optimization of a Continuous Process for the Biodiesel Production from Waste Vegetable Oils
911
Techno-economic optimization of a shell and tube heat exchanger by genetic and particle swarm algorithms
912
Techno-economic Optimization of a Stand-alone Photovoltaic-battery Renewable Energy System for Low Load Factor Situation- a Comparison between Optimization Algorithms
913
Techno-economic Optimization of Combined Cooling, Heat and Power System Based on Response Surface Methodology
914
Techno-economic performance analysis of bio-oil based Fischer-Tropsch and CHP synthesis platform
915
Techno-economic performance analysis of parabolic trough collector in Dhahran, Saudi Arabia
916
Techno-economic performance and cost reduction potential for the substitute/synthetic natural gas and power cogeneration plant with CO2 capture
917
Techno-economic performance and feasibility of biomass energy system: Tunisian case study
918
Techno-economic prospects for CO2 capture from distributed energy systems
919
Techno-economic prospects of small-scale membrane reactors in a future hydrogen-fuelled transportation sector
920
Techno-economic review of existing and new pumped hydro energy storage plant
921
Techno-economic review of solar cooling technologies based on location-specific data
922
Techno-economic studies on hybrid energy based cooling system for milk preservation in isolated regions
923
Techno-economic study for combined cycle power generation with desalination plants at Sharm El Sheikh Original Research Article
924
Techno-economic study of a heat pump enhanced flue gas heat recovery for biomass boilers
925
Techno-economic study of CO2 capture and storage in coal fired oxygen fed entrained flow IGCC power plants
926
Techno-economic study of CO2 capture from an existing coal-fired power plant: MEA scrubbing vs. O2/CO2 recycle combustion
927
Techno-economic study of different alternatives for biodiesel production
928
Techno-economic study of NMMO pretreatment and biogas production from forest residues
929
Technoeconomic study of supercritical biodiesel production plant
930
Techno-economic survey of Organic Rankine Cycle (ORC) systems
931
Techno-economic valuation and optimization of integrated photovoltaic/wind energy conversion system
932
Techno-economic viability of innovative membrane systems in water and mass recovery from dairy wastewater
933
Techno-economical analysis of off-grid hybrid systems at Kutubdia Island, Bangladesh
934
Techno-economical evaluation of a rice husk ash (RHA) based sand–cement block for reducing solar conduction heat gain to a building
935
Techno-economical evaluation of fluoride removal by electrocoagulation process: Optimization through response surface methodology Original Research Article
936
Techno-economical evaluation of water reuse for wetland restoration: a case study in a natural park in Catalonia, Northeastern Spain Original Research Article
937
Techno-economical method for the capacity sizing of a small hydropower plant
938
Techno-economical optimization based on swarm intelligence algorithm for a stand-alone wind-photovoltaic-hydrogen power system at south-east region of Mexico
939
Techno-economical study of biogas production improved by steam explosion pretreatment
940
Techno-economical study of ethanol and biogas from spruce wood by NMMO-pretreatment and rapid fermentation and digestion
941
Techno-economical study of hybrid power system for a remote village in Algeria
942
Techno-economical study of the use of Itaipu dam spilled turbinable energy to produce ammonia
943
Techno-economics of biogas-based water pumping in India: An attempt to internalize CO2 emissions mitigation and other economic benefits
944
Techno-economics of carbon preserving butanol production using a combined fermentative and catalytic approach
945
Techno-economics of micro-hydro projects for decentralized power supply in India
946
Techno-economics of rice husk pyrolysis, conversion with catalytic treatment to produce liquid fuel
947
Techno-economics of small wind electric generator projects for decentralized power supply in India
948
Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran
949
Techno-Environmental Analysis of Hybrid Energy System for Offshore Oil Rig Black Start
950
Techno-financial analysis and design of on-board intelligent-assisting system for a hybrid solar–DEG-powered boat
951
TechnoFusiَn, a relevant facility for fusion technologies: The remote handling area
952
Technogenic load in small river watersheds in the Hibiny Mountains
953
Technogenic soils developed on mine spoils containing iron sulphides: Mineral transformations as an indicator of pedogenesis
954
Technogeopolitics and the struggle for control of world air routes, 1910–1928
955
TechnoGIN, a tool for exploring and evaluating resource use efficiency of cropping systems in East and Southeast Asia
956
Techno-globalism, techno-nationalism and technological systems: organizing the evidence
957
Technogovernance: Evidence, subjectivity, and the clinical encounter in primary care medicine
958
Technohype and the book
959
Technoliteracy and learning: An analysis of the quality of knowledge in electronic representations of understanding
960
Technologic Advances in Endodontics
961
Technologic optimization for separation of scarce coal sludge
962
Technologic parameter optimization of gas quenching process using response surface method
963
TECHNOLOGIC PERFORMANCES OF CARP BREEDING (CYPRINUS CARPIO) IN GROUND BASINS OF SMALL DIMENSIONS
964
Technological acquisition and investment: lessons from recent indian experience
965
Technological activities of Staphylococcus carnosus and Staphylococcus simulans strains isolated from fermented sausages
966
Technological activity and survival of firms
967
Technological advancement, learning, and the adoption of new technology
968
Technological Advancements in Monoclonal Antibodies
969
Technological advancements in synchronous collaboration: The effect of 3D virtual worlds and tangible user interfaces on architectural design
970
Technological advances and applications of geothermal energy pile foundations and their feasibility in Australia
971
Technological advances and mechanistic basis for fungal biopulping
972
Technological advances and the next 50 years of cardiology
973
Technological advances and the next 50 years of cardiology
974
Technological advances and the next 50 years of cardiology: Ethics and privacy
975
Technological advances and the next 50 years of cardiology: Glossary
976
Technological advances in aquaculture farms for minimal effluent discharge to oceans
977
Technological Advances in Caries Diagnosis
978
Technological advances in equestrian sports: Are they beneficial for both performance and welfare?
979
Technological Advances in Extraction Techniques and Outpatient Oral Surgery
980
Technological Advances in Implantable Cardioverter-Defibrillators Before the Year 2000 and Beyond
981
Technological advances in improved and alternative sources of lipids: Edited by B. S. Kamel & Y. Kakuda, Blackie Academic & Professional, Glasgow. 1993. xiv 397 pp. Cost £69.00. ISBN 0-7514-00017
982
Technological Advances in Minimally Invasive TMJ Surgery
983
Technological advances in mucositis research: New insights and new issues
984
Technological Advances in Nontraditional Orthodontics
985
Technological advances in rebar tying jobs: a comparative analysis of the associated yields and illnesses
986
Technological advances in steels heat treatment
987
Technological advantage, alliances with customers, local knowledge and competitor identification
988
Technological agglomeration and the emergence of clusters and networks in nanotechnology
989
Technological alliances and the market valuation of new economy firms
990
Technological Alternatives with Low Consumptions to Regenerate the Degraded Grasslands
991
Technological and architectural solutions for Dutch nursing homes: Results of a multidisciplinary mind mapping session with professional stakeholders
992
Technological and architectural solutions for Dutch nursing homes: Results of a multidisciplinary mind mapping session with professional stakeholders
993
Technological and chemical assessment of various thermochemical cycles: From the UT3 cycle up to the two steps iron oxide cycle
994
Technological and economic comparison of the usage of beech and alder wood in plywood and laminated veneer lumber manufacturing
995
Technological and economic strategies for the optimization of Polish electrolytic copper production plants
996
Technological and economical analysis of water recovery in steam injected gas turbines
997
Technological and economical comparison of roughing strategies via milling, sinking-EDM, wire-EDM and ECM for titanium- and nickel-based blisks
998
Technological and Efficiency Change of Private Hospitals in Tanzania: Does the Size Matter?
999
Technological and environmental behavior of sewage sludge ash (SSA) in cement-based materials
1000
Technological and material aspects of production of vibration compensators for exhaust systems
