ليست عنوان مقالات لاتين Mechanical Alloying and Thermal Decomposition of (ZrO2)0.8-(ALPHA-Fe2O3)0.2 Powder for Gas Sensing Applications Mechanical behaviour of NiTi parts prepared by powder metallurgical methods

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Mechanical Alloying and Thermal Decomposition of (ZrO2)0.8-(ALPHA-Fe2O3)0.2 Powder for Gas Sensing Applications

2

Mechanical alloying and thermal stability of Al67Ti25M8 (M=Cr, Zr, Cu)

3

Mechanical alloying and thermal stability of Al67Ti25M8 (M=Cr, Zr, Cu)

4

Mechanical alloying behavior of Ti6Al4V residual scraps with addition of Al2O3 to produce nanostructured powder

5

Mechanical alloying for the effective dispersion of sub-micron SiCp reinforcements in Al–Li alloy composite

6

Mechanical alloying for the effective dispersion of sub-micron SiCp reinforcements in Al–Li alloy composite

7

Mechanical alloying in the Fe–Cu system

8

Mechanical alloying in the Fe–Cu system

9

Mechanical alloying of Al70Pd20Mn10 elemental powder mixture

10

Mechanical alloying of Al70Pd20Mn10 elemental powder mixture

11

Mechanical alloying of Al–Cu–Fe elemental powders

12

Mechanical alloying of Al–Cu–Fe elemental powders

13

Mechanical alloying of alumina–yttria powder mixtures

14

Mechanical alloying of BiSb semiconducting alloys

15

Mechanical alloying of BiSb semiconducting alloys

16

Mechanical alloying of carbon nanotube and Al6061 powder for metal matrix composites

17

Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu-Fe composite

18

Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu–Fe composite Original Research Article

19

Mechanical alloying of Fe100−x−yNbxBy (x = 5, 10; y = 10, 15): From pure powder mixture to amorphous phase

20

Mechanical alloying of Fe–B powders

21

Mechanical alloying of Fe–B powders

22

Mechanical alloying of Fe–Mn and Fe–Mn–Si

23

Mechanical alloying of Fe–Mn and Fe–Mn–Si

24

Mechanical alloying of highly processable glassy alloys

25

Mechanical alloying of highly processable glassy alloys

26

Mechanical alloying of La55Al25Cu10Ni5Co5 glass-forming alloy with refractory metals

27

Mechanical alloying of La55Al25Cu10Ni5Co5 glass-forming alloy with refractory metals

28

Mechanical alloying of La55Al25Cu10Ni5Co5 glass-forming alloy with refractory metals

29

Mechanical alloying of lanthana-bearing nanostructured ferritic steels Original Research Article

30

Mechanical alloying of MoSi2 with ternary alloying elements. Part 2 computer simulation

31

Mechanical alloying of MoSi2 with ternary alloying elements. Part 2 computer simulation

32

Mechanical alloying of MoSi2 with ternary alloying elements.: Part 1: Experimental

33

Mechanical alloying of multi-walled carbon nanotubes and aluminium powders for the preparation of carbon/metal composites Original Research Article

34

Mechanical alloying of multi-walled carbon nanotubes reinforced aluminum composite powder

35

Mechanical alloying of refractory metal–silicon systems

36

Mechanical alloying of Sm and Fe mixtures having the molar ratio of 1/2 and 1/3

37

Mechanical alloying of the NiAl(M) (MTi,Fe) system

38

Mechanical alloying of the NiAl(M) (MTi,Fe) system

39

Mechanical alloying of the Ti-Al system in atmosphere of hydrogen and argon

40

Mechanical alloying of TiC/M2 high speed steel composite powders and sintering investigation

41

Mechanical alloying of TiC/M2 high speed steel composite powders and sintering investigation

42

Mechanical alloying of titanium

43

Mechanical alloying preparation of fullerene-like Co3C nanoparticles with high hydrogen storage ability

44

Mechanical alloying process of vanadium powder with 1.7 wt.%Y addition

45

Mechanical alloying processing and rapid plasma activated sintering consolidation of nanocrystalline iron-aluminides

46

Mechanical alloying processing and rapid plasma activated sintering consolidation of nanocrystalline iron-aluminides

47

Mechanical alloying, nitrogen storage and magnetization of Ca–Co powder

48

Mechanical alloying, sintering and characterization of Al2O3–20 wt%–Cu nanocomposite

49

Mechanical amorphization of Fe75Nb10B15 powder: Microstructural and magnetic characterization

50

Mechanical amplification mechanism of kinesin’s -domain

51

Mechanical analyses of hooked fiber pullout performance in ultra-high-performance concrete

52

Mechanical analyses of morphological and topological transformation of liposomes

53

Mechanical analysis and design of casing in directional well under in-situ stresses

54

Mechanical analysis and toughening mechanisms of a multiphase recycled CFRP

55

Mechanical analysis of 3D braided composites: a finite element model

56

Mechanical analysis of a cracked beam reinforced with an external FRP plate

57

Mechanical analysis of a functionally graded cylinder-piston under internal pressure due to a combustion engine using a cylindrical super element and considering thermal loading

58

Mechanical analysis of a mixed mode debonding test for “composite” pavements

59

Mechanical analysis of cluster-grain separator device of a new head of paddy harvesting machine

60

Mechanical analysis of cluster-grain separator device of a new head of paddy harvesting machine

61

Mechanical analysis of edge bending mode for four-roll plate bending process

62

Mechanical analysis of explanted saline-filled breast implants exposed to betadine pocket irrigation

63

Mechanical analysis of eyelid morphology

64

Mechanical analysis of fault slip data: Implications for paleostress analysis

65

Mechanical analysis of fuel fretting problem

66

Mechanical analysis of fuel fretting problem

67

Mechanical analysis of fuel fretting problem Original Research Article

68

Mechanical analysis of graphene-based woven nano-fabric

69

Mechanical analysis of hollow fiber membrane integrity in water reuse applications Original Research Article

70

Mechanical analysis of maxillofacial miniplates

71

Mechanical analysis of percutaneous sacroplasty using CT image based finite element models

72

Mechanical analysis of reinforced concrete box beam strengthened with carbon fiber sheets under combined actions

73

Mechanical analysis of second order helical structure in electrical cable

74

Mechanical analysis of the blistering of a thin film deposited on a glassy polymer

75

Mechanical analysis of the crystalline–amorphous laminated composite based on a two-phase model

76

Mechanical analysis of the EC upper launcher with respect to electromagnetic loads

77

Mechanical analysis of the geometry of forced-folds

78

Mechanical analysis of the joint between Wendelstein 7-X target elements and the divertor frame structure

79

Mechanical analysis of the PF1 feeder for ITER

80

Mechanical analysis of the scratch test on elastic and perfectly plastic materials with the three-dimensional finite element modeling

81

Mechanical analysis of the scratching of metals and polymers with conical indenters at moderate and large strains

82

Mechanical Analysis of the Three-dimensional Deformation Shape Ratio of Spacer Knitted Fabrics under Uniaxial Tension

83

Mechanical analysis of toughness degradation due to premature fracture of course inclusions in wrought aluminium alloys

84

Mechanical analysis of toughness degradation due to premature fracture of course inclusions in wrought aluminium alloys

85

Mechanical analysis of tubing string in well testing operation

86

MECHANICAL ANALYSIS OF WEARABLE LOWER LIMB EXOSKELETON FOR REHABILITATION

87

Mechanical analysis using the unconfined penetration test on the tensile strength of Q3 loess around Lanzhou City, China

88

Mechanical anchorage of FRP tendons – A literature review

89

Mechanical and ablation properties of 2D-carbon/carbon composites pre-infiltrated with a SiC filler Original Research Article

90

Mechanical and abrasive wear characterization of bidirectional and chopped E-glass fiber reinforced composite materials

91

Mechanical and acid-etching properties of Bi2O3–ZnO–B2O3 glass-containing ceramic fillers

92

Mechanical and acoustic evaluation of potato chip crispness using a versatile texture analyzer Original Research Article

93

Mechanical and acoustic response of an underwater structure subjected to mechanical excitation

94

Mechanical and acoustical characteristics of bound rubber granulate

95

Mechanical and acoustical properties as a function of PEG concentration in macroporous silica gels

96

Mechanical and acoustical study of a structural bond: comparison theory/numerical simulations/experiment

97

Mechanical and adhesion properties of Al/AlN multilayered thin films

98

Mechanical and anisotropic behaviors of 7075 aluminum alloy sheets

99

Mechanical and anisotropic behaviors of Mg–Li–Zn alloy thin sheets

100

Mechanical and Antibacterial Properties of Paper Coated with Chitosan

101

Mechanical and antibacterial properties of recycled carton paper coated by PS/Ag nanocomposites for packaging

102

Mechanical and barrier properties of epoxy polymer filled with nanolayered silicate clay particles

103

Mechanical and barrier properties of epoxy resin filled with multi-walled carbon nanotubes Original Research Article

104

Mechanical and barrier properties of MOCVD processed alumina coatings on Ti6Al4V titanium alloy

105

Mechanical and barrier properties of nanocrystalline cellulose reinforced chitosan based nanocomposite films

106

Mechanical and barrier properties of sodium caseinate–anhydrous milk fat edible films

107

Mechanical and Bioactive Properties of a Commercial Glass Carbomer: GCP Glass Fill

108

Mechanical and biochemical characterization of cartilage explants in serum-free culture

109

Mechanical and biochemical properties of human cervical tissue

110

Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys

111

Mechanical and biodegradable properties of porous titanium filled with poly-L-lactic acid by modified in situ polymerization technique

112

Mechanical and biological characterization of resin-modified glass-ionomer cement containing doxycycline hyclate

113

Mechanical and biological properties of hydroxyapatite/tricalcium phosphate scaffolds coated with poly(lactic-co-glycolic acid)

114

Mechanical and biological properties of oxidized horn keratin

115

Mechanical and biological stability of superplastically embedded HA nanolayer deformed at high temperature

116

Mechanical and biomechanical measurements of five currently available osteosynthesis systems of self-tapping screws

117

Mechanical and biomedical properties of hydroxyapatite-based gradient coating on α-Al2O3 ceramic substrate

118

Mechanical and biotribological properties of ceramic–metal composites (TiC/Ti–15Mo and SiC/Ti–15Mo) for joint prostheses and the effects of additive metallic elements of W, Nb, and Ir

119

Mechanical and bond properties of coconut shell concrete

120

Mechanical and chemical analyses across dental porcelain fused to CP titanium or Ti6Al4V

121

Mechanical and chemical behavior of spruce wood modified by heat

122

Mechanical and chemical characteristics of hermetically coated silica optical fibre

123

Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment

124

Mechanical and chemical consequences of the residual stresses in plasma sprayed hydroxyapatite coatings

125

Mechanical and chemical control of red rice (Oryza sativa L. var. sylvatica) in rice (Oryza sativa L.) pre-planting

126

Mechanical and chemical investigation of the temperature influence on the tribological mechanisms occurring in OMC/cast iron friction contact

127

Mechanical and chemical mechanisms in the tribocorrosion of a Stellite type alloy

128

Mechanical and chemical properties of PBIID-treated plastics

129

MECHANICAL AND CHEMICAL PROPERTIES OF SiO2-Al2O3-CaO-MgO (R2O) GLASS CERAMICS IN THE PRESENCE OF VARIOUS NUCLEATING AGENTS

130

Mechanical and clinical predictors of J-wire fracture and injury in permanent atrial pacemaker lead: Implications for management

131

Mechanical and compositional characteristics of steam-treated Douglas fir (Pseudotsuga menziesii L.) during pelletization

132

Mechanical and corrosion behavior of plain low carbon dual-phase steels Pages 433-440

133

Mechanical and corrosion behaviour of as-cast and annealed Zr60Cu20Al10Fe5Ti5 bulk metallic glass

134

Mechanical and corrosion behaviour of EUROFER 97 steel exposed to Pb–17Li

135

Mechanical and corrosion properties of (Ti,Si)N coating synthesized by cathodic arc plasma evaporation

136

Mechanical and Corrosion Properties of AZ31 Magnesium Alloy Repeatedly Recycled by Hot Extrusion

137

Mechanical and corrosion properties of binary Mg–Dy alloys for medical applications

138

Mechanical and corrosion properties of dc magnetron sputtered Al/Cr multilayers

139

Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation

140

Mechanical and corrosion properties of rheocast and low-pressure cast A356-T6 alloy

141

Mechanical and corrosion properties of rheocast and low-pressure cast A356-T6 alloy

142

Mechanical and corrosion properties of rheocast and low-pressure cast A356-T6 alloy

143

Mechanical and corrosion properties of Ti–6Al–4V alloy joints brazed with a low-melting-point 62.7Zr–11.0Ti–13.2Cu–9.8Ni–3.3Be amorphous filler metal

144

Mechanical and corrosion resistance of a new nanostructured Ti–Zr–Ta–Nb alloy

145

Mechanical and corrosion resistance of hydrophilic sphene/titania composite coatings on titanium and deposition and release of cefazolin sodium/chitosan films

146

Mechanical and corrosion resistant properties of martensitic stainless steel plasma nitrocarburized with rare earths addition

147

Mechanical and corrosion study of diamond-like carbon coating on NiTi alloys

148

Mechanical and corrosion-resistance performance of electrodeposited titania–nickel nanocomposite coatings

149

Mechanical and corrosion-resistant properties of Ti–Nb–Si–N nanocomposite films prepared by a double glow discharge plasma technique

150

Mechanical and cropping behavior of direct drilled soil under different traffic intensities: effect on soybean (Glycine max L.) yields

151

MECHANICAL AND CULTURAL CONTROL METHODS FOR LAND SNAIL Monacha cartusiana (Müller) INHABITING SOME ORCHARDS AT SHARKIA GOVERNORATE

152

Mechanical and Damping Properties of Fullerene-Dispersed AZ91 Magnesium Alloy Composites Processed by a Powder Metallurgy Route

153

Mechanical and damping properties of thermal treated Mg–Zn–Y–Zr alloys reinforced with quasicrystal phase

154

Mechanical and degradability properties of polyethylene/ PBL composites in a wet-dry controlled environment

155

Mechanical and dielectric investigation on point defects and phase transition in ferroelectric ceramics

156

Mechanical and dielectric properties of 2.5D SiCf/SiC–Al2O3 composites prepared via precursor infiltration and pyrolysis

157

Mechanical and dielectric properties of gelcasted Si3N4 porous ceramic using CaHPO4 as an additive

158

Mechanical and dielectric properties of porous Si2N2O–Si3N4 in situ composites

159

Mechanical and dielectric properties of porous Si3N4 ceramics using PMMA as pore former

160

Mechanical and dielectric properties of porous Si3N4–SiO2 composite ceramics

161

Mechanical and dielectric properties of short carbon fiber reinforced Al2O3 composites with MgO additive

162

Mechanical and dielectric properties of silicon nitride ceramics with high and hierarchical porosity

163

Mechanical and dielectric relaxation in neodymium-modified bismuth titanate ceramics

164

Mechanical and dielectric relaxation spectra in seven highly viscous glass formers

165

Mechanical and dry sliding wear characterization of epoxy–TiO2 particulate filled functionally graded composites materials using Taguchi design of experiment

166

Mechanical and drying shrinkage properties of structural-graded polystyrene aggregate concrete

167

Mechanical and dry-sliding wear properties of boronized pure cobalt using boronizing powders with SiC as diluent

168

Mechanical and durability characteristics of concrete containing EAF slag as aggregate

169

Mechanical and durability characteristics of gypsum-free blended cements incorporating sulphate-rich reject fly ash

170

Mechanical and durability characteristics of marble-powder-based high-strength concrete

171

Mechanical and durability properties of cement mortar with Algerian natural pozzolana

172

Mechanical and durability properties of concrete made with dredged marine sand

173

Mechanical and durability properties of concrete using contaminated recycled aggregates

174

Mechanical and durability properties of concretes containing paper-mill residuals and fly ash

175

Mechanical and durability properties of concretes containing recycled lime powder and recycled aggregates

176

Mechanical and durability properties of high performance concretes containing supplementary cementitious materials

177

Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles

178

MECHANICAL AND DURABILITY PROPERTIES OF RECYCLED CONCRETE AGGREGATE FOR NORMAL STRENGTH STRUCTURAL CONCRETE

179

Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash

180

MECHANICAL AND DURABILITY PROPERTIES OF SLAG BASED RECYCLED AGGREGATE CONCRETE

181

Mechanical and durability properties of ternary concretes containing silica fume and low reactivity blast furnace slag

182

Mechanical and durability studies on concrete containing wollastonite–fly ash combination

183

Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres

184

Mechanical and dye adsorption properties of graphene oxide/chitosan composite fibers prepared by wet spinning

185

Mechanical and dynamic properties of coconut fibre reinforced concrete

186

Mechanical and dynamic properties of self-compacting crumb rubber modified concrete

187

Mechanical and Dynamical Properties of Structural Rubcrete Mixes

188

Mechanical and dynamic-mechanical behavior and morphology of polystyrene/perovskite composites: Effects of filler size

189

Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates

190

Mechanical and elastic properties of fine-grained polycrystalline scandia and erbia as determined by indentation techniques

191

Mechanical and elastic properties of modified thick thermal barrier coatings

192

Mechanical and elastic properties of modified thick thermal barrier coatings

193

Mechanical and Electrical Behavior of Polymer Matrix Composite and their Hybrids Reinforced with (Carbon Black–Boron) Particles

194

Mechanical and electrical characterisation of a phase transformation in thermal barrier coatings

195

Mechanical and electrical characterization of Cu-2 wt.% SWCNT nanocomposites synthesized by in situ reduction

196

Mechanical and electrical failures leading to major fires

197

Mechanical and electrical properties of a MWNT/epoxy composite

198

Mechanical and electrical properties of Al2O3/Ce0.8Y0.2O1.9 composite electrolytes

199

Mechanical and electrical properties of aligned carbon nanotube/carbon matrix composites

200

Mechanical and electrical properties of B4C–CrB2 ceramics fabricated by liquid phase sintering

201

Mechanical and electrical properties of carbon nanofibers reinforced aluminum nitride composites prepared by plasma activated sintering

202

Mechanical and electrical properties of carbon nanotube ribbons

203

Mechanical and electrical properties of cross-linked carbon nanotubes Original Research Article

204

Mechanical and electrical properties of Cu–Ta nanocomposites prepared by high-energy ball milling Original Research Article

205

Mechanical and Electrical Properties of Epoxy/ Multi-walled Carbon Nanotube/Nanoclay Nanocomposites

206

Mechanical and electrical properties of GeSb2Te4 film with external voltage applied

207

Mechanical and electrical properties of hot-pressed borosilicate glass matrix composites containing multi-wall carbon nanotubes

208

Mechanical and electrical properties of mechanically alloyed nanocrystalline Cu–Nb alloys Original Research Article

209

Mechanical and electrical properties of multi walled carbon nanotube/ABC block terpolymer composites Original Research Article

210

Mechanical and electrical properties of multi-wall carbon nanotube/poly(lactic acid) composites Original Research Article

211

Mechanical and electrical properties of nanostructured ‘plastic metals’

212

Mechanical and electrical properties of novel poly(ether ether ketone)/carbon nanotube/inorganic fullerene-like WS2 hybrid nanocomposites: Experimental measurements and theoretical predictions

213

Mechanical and electrical properties of paper sheets treated with chitosan and its derivatives

214

Mechanical and electrical properties of PZT ceramics (Zr:Ti=0.40:0.60) related to Nd3+ Addition

215

Mechanical and electrical properties of PZT ceramics (Zr:Ti=0.40:0.60) related to Nd3+ Addition

216

Mechanical and electrical properties of Sc2O3-doped zirconia ceramics improved by postsintering with HIP

217

Mechanical and electrical properties of small amount of oxides reinforced PZT ceramics

218

Mechanical and electrical properties of superplastically foamed titania-based ceramics

219

Mechanical and electrical property improvement in CNT/Nylon composites through drawing and stretching

220

Mechanical and electrical response of carbon nanotube-based fabric composites to Hopkinson bar loading

221

Mechanical and electrical tests on the attachment keys for the divertor vertical target

222

Mechanical and electrochemical behaviors assessments of Aluminum Graphene Oxide composites fabricated by mechanical milling and repetitive upsetting extrusion

223

Mechanical and electrochemical characterization of vanadium nitride (VN) thin films

224

Mechanical and electrochemical interactions during liquid–solid impingement on high-alloy stainless steels

225

Mechanical and electrochemical properties of multiple-layer diode laser cladding of 316L stainless steel

226

Mechanical and electromagnetic induction of protection against oxidative stress

227

Mechanical and electromagnetic properties of northern Gulf of Mexico sediments with and without THF hydrates

228

Mechanical and electromagnetic shielding properties of SiCf/SiC composites fabricated by combined CVI and PIP process

229

Mechanical and electromechanical behavior of oxide coatings grown on stainless steel 304L by nanosecond pulsed laser irradiation

230

Mechanical and Electromechanical Properties of Vinylidene Fluoride Terpolymers

231

Mechanical and electronic properties of Ag3Sn intermetallic compound in lead free solders using ab initio atomistic calculation

232

Mechanical and electronic properties of C60 under structure distortion studied with density functional theory

233

Mechanical and electronic properties of carbon and boron–nitride nanotubes Original Research Article

234

Mechanical and electronic properties of carbon nanobuds: First-principles study

235

Mechanical and electronic properties of diborides of transition 3d–5d metals from first principles: Toward search of novel ultra-incompressible and superhard materials

236

Mechanical and electronic properties of endofullerene Ar@C60 and Kr@C60 studied via structure distortions

237

Mechanical and electronic properties of Rh and Rh3Zr from first-principles calculation

238

Mechanical and electrostatic properties of carbon nanotubes and nanowires

239

Mechanical and ellipsometry measurements of thin TiN layer prepared by PIII

240

Mechanical and energetical analysis of molecular dynamics simulations of dislocation–defect interactions Original Research Article

241

Mechanical and environmental effects on stress corrosion cracking of low carbon pipeline steel in a soil solution

242

Mechanical and environmental loading of concrete beams strengthened with epoxy and polyurethane matrix carbon fiber laminates

243

Mechanical and erosion-resistance properties of slag α-sialon ceramics

244

Mechanical and experimental investigation on nuclear fuel fretting

245

Mechanical and experimental study on freeze proof solar powered adsorption cooling tube using active carbon/methanol working pair

246

Mechanical and failure behaviour of hybrid polymer–metal staked joints

247

Mechanical and failure properties of single attached cells under compression

248

Mechanical and fatigue performance of rubber concrete

249

Mechanical and fatigue properties of martensitic Fe-13Cr steel in contact with lead and lead-bismuth melts

250

Mechanical and fatigue strengths of silicon nitride ceramics in liquid aluminum alloys

251

Mechanical and flame-retardant properties of styrene–ethylene–butylene–styrene/carbon nanotube composites containing bisphenol A bis(diphenyl phosphate)

252

Mechanical and fracture behavior of bainitic rail steel

253

Mechanical and fracture behavior of cement-based materials characterized by combined elastic wave approaches

254

Mechanical and fracture behavior of polypropylene/poly(ethylene-co-vinyl alcohol) blends compatibilized with ionomer Na+

255

Mechanical and fracture behavior of powder metalurgy processed Ti3Al-based alloys

256

Mechanical and fracture behavior of veneer–framework composites for all-ceramic dental bridges

257

Mechanical and fracture behaviour of aluminium-based discontinuously reinforced composites at hot working temperatures

258

Mechanical and fracture mechanical characterization of building materials used for external thermal insulation composite systems

259

Mechanical and fracture properties of an AZ91 Magnesium alloy reinforced by Si and SiC particles

260

Mechanical and fracture properties of cement-based bi-materials after thermal cycling

261

Mechanical and fracture properties of ternary PE/PA6/GF composites

262

Mechanical and fresh properties of fiber reinforced self-compacting lightweight concrete

263

Mechanical and fresh properties of high-strength self-compacting concrete containing class C fly ash

264

Mechanical and functional assessment of the wrist affected by rheumatoid arthritis: A finite element analysis

265

Mechanical and functional properties of beef products obtained using microbial transglutaminase with treatments of pre-heating followed by cold binding

266

Mechanical and functional properties of the equine superficial digital flexor tendon

267

Mechanical and gaseous properties of coal briquettes in terms of outburst risk

268

Mechanical and gelling properties of comminuted sausages containing chicken MDM Original Research Article

269

Mechanical and geometric changes in the growing femora of BMP-5 deficient mice

270

Mechanical and histological characterization of the abdominal muscle. A previous step to modelling hernia surgery

271

Mechanical and histological evaluation of a plasma sprayed hydroxyapatite coating on a titanium bond coat

272

Mechanical and histological evaluation of a PMMA-based bone cement modified with γ-methacryloxypropyltrimethoxysilane and calcium acetate

273

Mechanical and histomorphometric evaluations of titanium implants with different surface treatments inserted in sheep cortical bone

274

Mechanical and hydration properties of ground granulated blastfurnace slag pastes activated with MgO–CaO mixtures

275

Mechanical and hydraulic coupling of injection-induced slip along pre-existing fracture

276

Mechanical and hydraulic properties of sludge deposit on sludge drying reed beds (SDRBs): Influence of sludge characteristics and loading rates

277

Mechanical and hydraulic resistance relations in crust-topped soils

278

Mechanical and hydric properties of alkali-activated aluminosilicate composite with electrical porcelain aggregates

279

Mechanical and in vitro biological performances of hydroxyapatite–carbon nanotube composite coatings deposited on Ti by aerosol deposition

280

Mechanical and in vitro degradation behavior of ultrafine calcium polyphosphate reinforced magnesium-alloy composites

281

Mechanical and in vitro performance of 13–93 bioactive glass scaffolds prepared by a polymer foam replication technique

282

Mechanical and in vitro testing of aerosol–gel deposited titania coatings for biocompatible applications

283

Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures

284

Mechanical and informational modeling of steel beam-to-column connections

285

Mechanical and interfacial characterisation of Fe3AI and Fe3Al---Al2O3 intermetallic composite made by mechanical smearing and hot isostatic pressing

286

Mechanical and interfacial evaluation of CNT/polypropylene composites and monitoring of damage using electrical resistance measurements

287

Mechanical and interfacial properties of wood and bio-based thermoplastic composite

288

Mechanical and leaching behaviour of slag-cement and lime-activated slag stabilised/solidified contaminated soil Original Research Article

289

Mechanical and leaching properties of cement solidified hospital solid waste incinerator fly ash

290

Mechanical and leakrate predictions for nuclear power plant containments in accidental conditions

291

Mechanical and leakrate predictions for nuclear power plant containments in accidental conditions Original Research Article

292

Mechanical and machining characteristics of GF/PP and GF/Polyester composites

293

Mechanical and machining properties of X38CrMoV5-1/Al2O3 metal matrix composites and components

294

Mechanical and magnetic characterisation of SiC whisker reinforced Fe–Co alloy composites

295

Mechanical and magnetic load effects in Nb3Sn cable-in-conduit conductors Original Research Article

296

Mechanical and magnetic properties of a new austenitic structural steel

297

Mechanical and magnetic properties of metal fibre networks, with and without a polymeric matrix

298

Mechanical and magnetic properties of metallic glasses

299

Mechanical and magnetic properties of γ-Ni–xFe/Al2O3 composites

300

Mechanical and magnetic resonance imaging changes following eccentric or concentric exertions

301

Mechanical and magnetocaloric properties of Gd-based amorphous microwires fabricated by melt-extraction Original Research Article

302

Mechanical and metabolic functions in pig hearts after 4 days of chronic coronary stenosis

303

Mechanical and metabolic requirements for active lateral stabilization in human walking

304

Mechanical and metallurgical characterisation of electroformed nickel for helicopter erosion shield applications

305

Mechanical and metallurgical characterization of friction stir welding joints of AA6061-T6 with AA6082-T6

306

Mechanical and metallurgical effects of in process cooling during friction stir welding of AA7075-T6 butt joints Original Research Article

307

Mechanical and metallurgical investigation of martensite–austenite constituents in simulated welding conditions

308

MECHANICAL AND METALLURGICAL INVESTIGATION ON GAS METAL ARC WELDING OF SUPER AUSTENITIC STAINLESS ST

309

Mechanical and metallurgical properties of friction-welded TiC particulate reinforced Ti–6Al–4V

310

Mechanical and metallurgical properties of plasma sprayed and laser remelted Ni–20Cr and Stellite-6 coatings

311

Mechanical and metallurgical properties of pulsed neodymium-doped yttrium aluminum garnet laser welding of dual phase steels

312

Mechanical and metallurgical study of the fragmentation of end-of-life goods in a scrap shredder

313

Mechanical and microstructural analysis on the superplastic deformation behavior of Ti–6Al–4V Alloy

314

Mechanical and microstructural analysis on the superplastic deformation behavior of Ti–6Al–4V Alloy

315

Mechanical and microstructural analysis on the superplastic deformation behavior of Ti–6Al–4V Alloy

316

Mechanical and microstructural behaviour of CMSX-4 Ni-based superalloy joined by capacitor discharge welding

317

Mechanical and microstructural behaviour of isothermally and thermally fatigued ferritic/martensitic steels

318

Mechanical and microstructural behaviour of Y2O3 ODS EUROFER 97

319

Mechanical and microstructural characterisation of Nextel 650 alumina–zirconia fibres

320

Mechanical and microstructural characterisation of oxide films damage

321

Mechanical and microstructural characterisation of oxide films damage

322

Mechanical and microstructural characterisation of oxide films damage

323

Mechanical and microstructural characterisation of SiC- and SiBNC-fibre reinforced CMCs manufactured via PIP method before and after exposure to air

324

Mechanical and microstructural characteristics of detonation gun sprayed NiCrAlY + 0.4 wt% CeO2 coatings on superalloys

325

Mechanical and microstructural characterization of 6061 aluminum alloy strips severely deformed by Dissimilar Channel Angular Pressing

326

Mechanical and microstructural characterization of an alkali-activated slag/limestone fine aggregate concrete

327

Mechanical and microstructural characterization of boron nitride nanotubes-reinforced SOFC seal glass composite

328

Mechanical and microstructural characterization of calcium aluminosilicate (CAS) and SiO2/CAS composites deformed at high temperature and high pressure

329

Mechanical and microstructural characterization of electron beam welded reduced activation oxide dispersion strengthened – Eurofer steel

330

Mechanical and microstructural characterizations of ultrafine grained Zircaloy-2 produced by room temperature rolling

331

Mechanical and microstructural dissimilarities in alkali-activation for six Class F Korean fly ashes

332

Mechanical and Microstructural Evaluation of AA6082-T61 Joints Produced by Ultrasonic Vibration Assisted Friction Stir Welding Process

333

Mechanical and Microstructural Evaluation of Recycled 7075 Aluminum Swarf

334

Mechanical and microstructural evaluations of hot formed titanium sheets by electrical resistance heating process

335

Mechanical and microstructural evolution of Hi-Nicalon Trade Mark SiC fibers annealed in O2–H2O–Ar atmospheres

336

Mechanical and microstructural integrity of nickel–titanium and stainless steel laser joined wires Original Research Article

337

Mechanical and microstructural investigation of friction spot welded AA6181-T4 aluminium alloy

338

Mechanical and microstructural investigations into the crack arrest behaviour of a modern 2¼Cr-1 Mo pressure vessel steel

339

Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension–torsion-internal and external pressure

340

Mechanical and microstructural observations during compression creep of a short fiber reinforced AlMg metal matrix composite

341

Mechanical and microstructural performance of convex dies in axisymmetric extrusion—Theory and experimental verification

342

Mechanical and microstructural properties of a hipped RAFM ODS-steel

343

Mechanical and microstructural properties of heat cured alkali-activated slag mortars

344

Mechanical and microstructural properties of HVOF sprayed WC–Co and Cr3C2–NiCr coatings on the boiler tube steels using LPG as the fuel gas

345

Mechanical and microstructural properties of low-carbon steel-plate-reinforced gray cast iron

346

Mechanical and microstructural properties of notched E-glass/vinyl ester composite materials subjected to the environment and a sustained load

347

Mechanical and microstructural properties of notched E-glass/vinyl ester composite materials subjected to the environment and a sustained load

348

Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding

349

Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering

350

Mechanical and microstructural properties of robotic Cold Metal Transfer (CMT) welded 5083-H111 and 6082-T651 aluminum alloys

351

Mechanical and microstructural properties of SnAgCu solder joints

352

Mechanical and microstructural properties of soy protein – high amylose corn starch extrudates in relation to physiochemical changes of starch during extrusion Original Research Article

353

Mechanical and microstructural single-crystal Bauschinger effects: Observation of reversible plasticity in copper during bending Original Research Article

354

Mechanical and microstructural stability of P92 steel under uniaxial tension at high temperature

355

Mechanical and microstructure of reinforced hydroxyapatite/calcium silicate nano-composites materials

356

Mechanical and microstructure properties of chilled cast iron camshaft: Experimental and computer aided evaluation

357

Mechanical and microwave dielectric properties of KD-I SiCf/SiC composites fabricated through precursor infiltration and pyrolysis

358

Mechanical and microwave dielectric properties of SiCf/SiC composites with BN interphase prepared by dip-coating process

359

Mechanical and mineralogical properties of natural hydraulic lime-metakaolin mortars in different curing conditions

360

Mechanical and moisture-dependent swelling properties of compressed Japanese cedar

361

Mechanical and morphological anisotropy in injection molding of thermotropic liquid crystalline copolyesters

362

Mechanical and morphological behavior of polyolefin blends in the presence of CaCO3

363

Mechanical and morphological characterization of polymer–carbon nanocomposites from functionalized carbon nanotubes Original Research Article

364

Mechanical and morphological evaluation of the bond–dentin interface in direct resin core build-up method

365

Mechanical and morphological properties of fly ash/epoxy composites using conventional thermal and microwave curing methods

366

Mechanical and morphological properties of human quadriceps femoris and triceps surae muscle–tendon unit in relation to aging and running

367

Mechanical and Morphological Properties of Pineapple Peel Fibre Reinforced High Density Polyethylene

368

Mechanical and Morphological Properties of Short Nylon Fibre Reinforced NR/SBR Composites: Optimization of Interfacial Bonding Agent

369

Mechanical and muscular factors influencing the performance in maximal vertical jumping after different prestretch loads

370

Mechanical and natural durability properties of wood treated with a novel organic preservative/consolidant product

371

Mechanical and NH3 sensing properties of long multi-walled carbon nanotube ropes Original Research Article

372

Mechanical and Nondestructive Testing to Verify the Effectiveness of Composite Strengthening on Historical Cast Iron Bridge in Venice, Italy

373

Mechanical and numerical modeling of a porous elastic–viscoplastic material with tensile failure

374

Mechanical and numerical modelling of composite manufacturing processes deep-drawing and laying-up of thin pre-impregnated woven fabrics

375

Mechanical and numerical modelling of fluid-structure vibration instabilities of liquid propelled launch vehicle

376

Mechanical and optical characteristics of a new fiber optical system used for cardiac contraction measurement

377

Mechanical and optical characteristics of multilayer inorganic films on polyimide for anti-atomic-oxygen erosion

378

Mechanical and Optical Properties of CaCO3 Lumen-Loaded Paper: Effect of Polyethylenimine and Alum

379

Mechanical and optical properties of inverse-perovskites Sc3InX (X = B, C, N)

380

Mechanical and optical properties of ITO films with anti-reflective and anti-wear coatings

381

Mechanical and optical properties of plasma-polymerized vinyltriethoxysilane

382

Mechanical and optoelectric properties of post-annealed fluorine-doped tin oxide films by ultraviolet laser irradiation

383

Mechanical and oxidation properties of Ti–xFe–ySi alloys

384

Mechanical and oxidation properties of Ti–xFe–ySi alloys

385

Mechanical and oxidation resistance properties of 3D carbon fiber-reinforced mullite matrix composites prepared by sol–gel process

386

Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay

387

Mechanical and phase equilibria in inclusion–host systems

388

Mechanical and photocatalytic properties of hydroxyapatite/titania nanocomposites prepared by combined high gravity and hydrothermal process

389

Mechanical and physical behavior of spark plasma sintered ZrC–ZrB2–SiC composites

390

Mechanical and physical behaviors of short pitch-based carbon fiber-reinforced HfB2–SiC matrix composites

391

Mechanical and physical characterization of agricultural waste reinforced polymer composites

392

Mechanical and physical properties of a cement matrix through the recycling of thermoset composites

393

Mechanical and physical properties of aluminum powder/MDF dust/polypropylene composites

394

Mechanical and physical properties of calcium silicate/alumina composite for biomedical engineering applications

395

Mechanical and physical properties of carbon–graphite fiber-reinforced polymers intended for implant suprastructures

396

Mechanical and physical properties of cement blended with sewage sludge ash

397

Mechanical and physical properties of epoxy composites reinforced by vapor grown carbon nanofibers Original Research Article

398

Mechanical and physical properties of epoxy polymer concrete after exposure to temperatures up to 250 °C

399

Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods

400

Mechanical and physical properties of hydrothermally altered rocks, Taupo Volcanic Zone, New Zealand

401

Mechanical and physical properties of MWCNT/carbon composites with matrix derived from mesocarbon microbeads

402

Mechanical and Physical PROPERTIES of Partrticleboard made from 4-year-OLDLD rubberwood of RRIM 2000 series clones

403

Mechanical and physical properties of silorane and methacrylate-based composites

404

Mechanical and physical properties of silorane and methacrylate-based composites

405

Mechanical and physical properties of urea-formaldehyde bonded kenaf core particle boards

406

Mechanical and physical properties on carbon nanotube Original Research Article

407

Mechanical and physico-chemical aspects of wellbore stability during drilling operations

408

Mechanical and Physicochemical Regulation of the Action of Insulin-Like Growth Factor-I on Articular Cartilage

409

Mechanical and physico-chemical study of sulfur additives effect in milling of high strength steel

410

Mechanical and piezoresistive properties of InAs/AlGaSb cantilevers

411

Mechanical and precorroded fatigue properties of coated aluminium aircraft skin system as function of various thermal spray processes

412

Mechanical and radioactivity shielding performances of mortars made with colemanite, barite, ground basaltic pumice and ground blast furnace slag

413

Mechanical and radiographic properties of a shape memory polymer composite for intracranial aneurysm coils

414

Mechanical and rheological behavior of oil-well cement slurries produced with clinker containing carbon nanotubes

415

Mechanical and rheological properties and injectability of calcium phosphate cement containing poly (lactic-co-glycolic acid) microspheres

416

Mechanical and rheological properties of carbon nanotube-reinforced polyethylene composites

417

Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite

418

Mechanical and self-healing properties of cementitious composites reinforced with flax and cottonised flax, and compared with polyvinyl alcohol fibres

419

Mechanical and sensory testing of overfilled breast implants

420

Mechanical and shape memory properties of Ni54Mn25Ga21 high-temperature shape memory alloy

421

Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites

422

Mechanical and structural behavior of a swelling elastomer under compressive loading

423

Mechanical and structural changes of the rat cervix in late-stage pregnancy

424

Mechanical and structural characterisation of completely degradable polylactic acid/calcium phosphate glass scaffolds

425

Mechanical and structural characteristics of vulnerable plaques: analysis by coronary angioscopy and intravascular ultrasound

426

Mechanical and structural characterization of electrospun PAN-derived carbon nanofibers Original Research Article

427

Mechanical and Structural Characterization of New Carbon FRP Stirrups for Concrete Members

428

Mechanical and structural properties of AISI 8620 steel TiN coated, nitrided and TiN coated+nitrided

429

Mechanical and structural properties of bone in non-critical and critical healing in rat

430

Mechanical and structural properties of electrodeposited copper and their relation with the electrodeposition parameters

431

Mechanical and structural properties of helical and non-helical silica nanowire

432

Mechanical and structural properties of phosphate glasses

433

Mechanical and Structural Properties of Similar and Dissimilar Steel Joints

434

Mechanical and structural properties of various alloyed TiAlN-based hard coatings

435

Mechanical and structural stability of zirconium dihydride

436

Mechanical and Surface Properties of Initial and Working Aesthetic Orthodontic Archwires

437

Mechanical and swelling characterization of poly(N-isopropyl acrylamide -co- methoxy poly(ethylene glycol) methacrylate) sol–gels

438

Mechanical and swelling properties of PDMS interpenetrating polymer networks

439

Mechanical and swelling properties of thermoplastic elastomer blends

440

Mechanical and technological analysis of AISI 304 butt joints welded with capacitor discharge process

441

Mechanical and temperature dependant properties, structure and phase transitions of elastic polypropylenes

442

Mechanical and textural properties of extruded materials manufactured with AlFe and AlCeFe pillared bentonites

443

Mechanical and thermal actions of liquid curtains using hydroshield nozzles

444

Mechanical and thermal behavior of clay/epoxy nanocomposites

445

Mechanical and thermal behavior of nanoclay based polymer nanocomposites using statistical homogenization approach

446

Mechanical and thermal behavior of non-crimp glass fiber reinforced layered clay/epoxy nanocomposites

447

Mechanical and thermal behaviour of cordierite–zirconia composites

448

Mechanical and thermal behaviour of isotactic polypropylene reinforced with inorganic fullerene-like WS2 nanoparticles: Effect of filler loading and temperature

449

Mechanical and thermal buckling analysis of functionally graded plates

450

Mechanical and thermal carbonation of strontium ferrite SrFeOx

451

Mechanical and thermal characteristics of a mixed convection boundary-layer flow in a saturated porous medium

452

Mechanical and thermal characteristics of high density polyethylene–fly ash Cenospheres composites

453

Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles

454

Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers

455

Mechanical and thermal decomposition of with metal halides

456

Mechanical and thermal dewatering of residual sludge Original Research Article

457

Mechanical and thermal effects of floating continents on the global mantle convection

458

Mechanical and thermal evaluation of Ultra High Performance Fiber Reinforced Concretes for engineering applications

459

Mechanical and thermal expansion behavior of hipped aluminum–TiB2 composites

460

Mechanical and thermal expansion behavior of laser deposited metal matrix composites of Invar and TiC

461

Mechanical and thermal expansion behavior of laser deposited metal matrix composites of Invar and TiC

462

Mechanical and thermal expansion properties of glass fibers reinforced PEEK composites at cryogenic temperatures Original Research Article

463

Mechanical and thermal expansion properties of β-eucryptite prepared by sol–gel methods and hot pressing

464

Mechanical and thermal fatigue delamination of curved layered composites

465

Mechanical and thermal modelling of Friction Stir Welding

466

Mechanical and Thermal Performances of Rubber/Graphite Derivatives: Facile Synthesis, Characterization, and Formulation

467

Mechanical and thermal postbuckling of higher order shear deformable functionally graded plates on elastic foundations

468

Mechanical and thermal processing effects on protein integrity and peptide fingerprint of pea protein isolate

469

Mechanical and thermal properties of 2D and 3D SiC/SiC composites

470

Mechanical and thermal properties of 99% and 92% alumina at cryogenic temperatures

471

Mechanical and thermal properties of AlN–BN–SiC ceramics

472

Mechanical and thermal properties of basalt fiber reinforced poly(butylene succinate) composites

473

Mechanical and thermal properties of bio-composites based on polypropylene reinforced with Nut-shells of Argan particles

474

Mechanical and thermal properties of bleached kraft pulp–LDPE composites: Effect of epoxy functionalized compatibilizer

475

Mechanical and thermal properties of carbon nanotube/aluminum composites consolidated by spark plasma sintering

476

Mechanical and thermal properties of carbon nanotubes Original Research Article

477

Mechanical and thermal properties of cement composite graphite for solar thermal storage materials

478

Mechanical and thermal properties of Cf/SiC composites reinforced with carbon nanotube grown in situ

479

Mechanical and thermal properties of compatibilized composites of polyethylene and esterified lignin

480

Mechanical and thermal properties of composites of cis and trans-polyisoprene blends filled with Al-powder

481

Mechanical and thermal properties of copoly(styrene/acrylonitrile) compatibilised Nylon-thermoplastic elastomer blends

482

Mechanical and thermal properties of copoly(styrene/acrylonitrile) compatibilised Nylon-thermoplastic elastomer blends

483

Mechanical and thermal properties of date palm leaf fiber reinforced recycled poly (ethylene terephthalate) composites

484

Mechanical and thermal properties of eco-friendly poly(propylene carbonate)/cellulose acetate butyrate blends

485

Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree

486

Mechanical and thermal properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes

487

Mechanical and thermal properties of extruded soy protein sheets

488

Mechanical and thermal properties of fly ash/vinyl ester syntactic foams

489

Mechanical and thermal properties of gelatin films at different degrees of glutaraldehyde crosslinking

490

Mechanical and Thermal Properties of Graphene Oxide Filled Epoxy Nanocomposites

491

Mechanical and thermal properties of graphite platelet/epoxy composites

492

Mechanical and thermal properties of green lightweight engineered cementitious composites

493

Mechanical and thermal properties of hot pressed CoCrMo–porcelain composites developed for prosthetic dentistry

494

Mechanical and thermal properties of LaMgAl11O19

495

Mechanical and Thermal Properties of LENR Modified Epoxy Composite

496

Mechanical and thermal properties of lightweight concretes with vermiculite and EPS using air-entraining agent

497

Mechanical and Thermal Properties of ‎Nanocomposite Films Made of Polyvinyl ‎Alcohol/Nanofiber Cellulose and ‎Nanosilicon Dioxide using Ultrasonic ‎Method

498

Mechanical and thermal properties of natural fibers reinforced polymer composites: Doum/low density polyethylene

499

Mechanical and thermal properties of novel lightweight concrete mixtures containing recycled glass and metakaolin

500

Mechanical and thermal properties of novel polymerized NDGA–gelatin hydrogels

501

Mechanical and Thermal Properties of Palm-Based Polyurethane Composites Filled with Fe3O4, PANI and PANI/Fe3O4

502

Mechanical and thermal properties of perfluoroalkyl ethyl methacrylate–methyl methacrylate statistical copolymers synthesized in supercritical carbon dioxide

503

Mechanical and thermal properties of poly(arylene disulfide) derived from cyclic(4,4¢-oxybis(benzene)disulfide) via ring-opening polymerization

504

Mechanical and thermal properties of poly-ether ether ketone reinforced with CaCO3

505

Mechanical and thermal properties of polymer composite based on natural fibers: Moroccan hemp fibers/polypropylene

506

MECHANICAL AND THERMAL PROPERTIES OF POLYPROPYLENE REINFORCED BY CALCINED AND UNCALCINED ZEOLITE

507

Mechanical and thermal properties of polypropylene reinforced with Alfa fiber under different chemical treatment

508

Mechanical and thermal properties of SiCf/SiC composites irradiated with neutrons at high temperatures

509

Mechanical and thermal properties of SiO2/S composite coating prepared by APCVD

510

Mechanical and thermal properties of SiO2–PMMA monoliths

511

Mechanical and thermal properties of sisal fiber-reinforced rubber seed oil-based polyurethane composites

512

Mechanical and thermal properties of soy protein films processed by casting and compression Original Research Article

513

Mechanical and thermal properties of syndiotactic polystyrene blends with poly(p-phenylene sulfide)

514

Mechanical and thermal properties of thermoplastic acetylated starch/poly(ethylene-co-vinyl alcohol) blends

515

Mechanical and thermal properties of waste water bamboo husk fiber reinforced epoxy composites

516

Mechanical and thermal properties of waterborne epoxy composites containing cellulose nanocrystals

517

Mechanical and thermal properties of yam starch films

518

Mechanical and thermal property characterization of poly-l-lactide (PLLA) scaffold developed using pressure-controllable green foaming technology

519

Mechanical and thermal response of a nickel-base superalloy upon grinding with high removal rates

520

Mechanical and thermal response of a nickel-base superalloy upon grinding with high removal rates

521

Mechanical and thermal shock behavior of refractory materials for glass feeders

522

Mechanical and thermal shock properties of size graded MgO–PSZ refractory

523

MECHANICAL AND THERMAL SOURCES IN A GENERALIZED THERMOELASTIC HALF-SPACE

524

MECHANICAL AND THERMAL SOURCES IN A MICROPOLAR GENERALIZED THERMOELASTIC MEDIUM

525

Mechanical and thermal stability of mechanically induced near-surface nanostructures

526

Mechanical and thermal stability of TiN/NbN superlattice thin films

527

Mechanical and Thermal Stresses in a FGPM Hollow Cylinder Due to Non-Axisymmetric Loads

528

Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads

529

Mechanical and thermodynamic properties of infrared transparent low melting chalcogenide glass

530

Mechanical and thermodynamic properties of seven phases of SrHfO3: First-principles calculations

531

Mechanical and thermo-fluid behaviour during unrest at the Campi Flegrei caldera (Italy)

532

Mechanical and thermo-mechanical failure mechanism analysis of fiber/filler reinforced phenolic matrix composites

533

Mechanical and thermomechanical properties of a Ti50Ni25Cu25 melt spun ribbon

534

Mechanical and thermomechanical properties of commercially pure chromium and chromium alloys

535

Mechanical and thermo-physical characterization of three-directional carbon fiber composites for W-7X and ITER

536

Mechanical and thermophysical properties of carbon/carbon composites with hafnium carbide

537

Mechanical and three-body abrasive wear behaviour of PMMA/TPU blends

538

Mechanical and three-body abrasive wear behaviour of three-dimensional glass fabric reinforced vinyl ester composite

539

Mechanical and transport properties of 10 years old concretes prepared with different coarse aggregates

540

Mechanical and transport properties of low-temperature negative thermal expansion material Mn3CuN co-doped with Ge and Si Original Research Article

541

Mechanical and Transport Properties of Natural Rubber Reinforced with Piassava (Raphia Hookeri) Fibre Composites

542

Mechanical and transport properties of polymeric foams derived from 3D images

543

Mechanical and tribological aspects on a-C films deposited by lamp assisted chemical vapour deposition

544

Mechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites

545

Mechanical and tribological behavior of clay–polypropylene nanocomposites

546

Mechanical and tribological behavior of HNBR modified by ion implantation, influence of aging

547

Mechanical and tribological behavior of nanostructured copper–alumina cermets obtained by Pulsed Electric Current Sintering

548

Mechanical and tribological behavior of PTFE–polyoxadiazole fiber composites. Effect of filler treatment

549

Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements

550

Mechanical and tribological behavior of W/WCN bilayers grown by pulsed vacuum arc discharge

551

Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites

552

Mechanical and tribological characterisation of electrodeposited AuCuCd

553

Mechanical and tribological characterization of human tooth

554

Mechanical and tribological characterization of tetrahedral diamond-like carbon deposited by femtosecond pulsed laser deposition on pre-treated orthopaedic biomaterials

555

Mechanical and tribological investigations of sol–gel derived SiO2 optical coatings

556

Mechanical and tribological performance of Al2O3-TiO2 coatings elaborated by flame and plasma spraying

557

Mechanical and tribological performance of MoS2 co-sputtered composites

558

Mechanical and tribological properties evaluation of cathodic arc deposited CrN/ZrN multilayer coatings

559

Mechanical and tribological properties of a sintered glass-ceramic compared to granite and porcelainized stoneware

560

Mechanical and tribological properties of acrylonitrile–butadiene rubber filled with graphite and carbon black

561

Mechanical and tribological properties of Al–40Zn–Cu alloys

562

Mechanical and tribological properties of Al–Si–Mo plasma-sprayed coatings

563

Mechanical and tribological properties of AlTiN/AlCrBN multilayer films synthesized by cathodic arc evaporation

564

Mechanical and tribological properties of aluminide coating modified with yttrium

565

Mechanical and tribological properties of aluminium-base composites produced by the recycling of chips

566

Mechanical and tribological properties of calcia–magnesia–alumina–silica-based glass–ceramics prepared by in situ crystallization

567

Mechanical and tribological properties of carbon and nitrogen consecutive ion implantation into aluminium

568

Mechanical and tribological properties of carbon fabric composites filled with several nano-particulates

569

Mechanical and tribological properties of ceramic/metal composites: A review of phenomena spanning from the nanometer to the micrometer length scale

570

Mechanical and tribological properties of CNx films deposited by reactive magnetron sputtering

571

Mechanical and tribological properties of coatings sputtered from SiC target in the presence of CH4 gas

572

Mechanical and tribological properties of compositionally graded CrAlN films deposited by AC reactive magnetron sputtering

573

Mechanical and tribological properties of CrAlN-Ag self-lubricating films

574

Mechanical and tribological properties of Cr–N and Cr–SI–N coatings reactively sputter deposited

575

Mechanical and tribological properties of CrN coatings deposited by large area filtered cathodic arc

576

Mechanical and tribological properties of CrN/Ag and CrSiN/Ag nanoscale multilayers

577

Mechanical and tribological properties of CrTiCu(B,N) glassy-metal coatings deposited by reactive magnetron sputtering

578

Mechanical and tribological properties of duplex treated TiN, nc-TiN/a-SiNx and nc-TiCN/a-SiCN coatings deposited on 410 low alloy stainless steel

579

Mechanical and tribological properties of electrolytic hard chrome and HVOF-sprayed coatings

580

Mechanical and tribological properties of electrospun PA 6(3)T fiber mats

581

Mechanical and tribological properties of high velocity oxy-fuel thermal sprayed nanocrystalline CrCNiCr coatings

582

Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites

583

Mechanical and tribological properties of hybrid fabric–modified polyetherimide composites

584

Mechanical and tribological properties of multicomponent Ti–B–C–N thin films with varied C contents

585

Mechanical and tribological properties of multi-element (AlCrTaTiZr)N coatings

586

Mechanical and tribological properties of multilayered TiSiN/CrN coatings synthesized by a cathodic arc deposition process

587

Mechanical and tribological properties of nanocomposite TiSiN coatings

588

Mechanical and tribological properties of nanocrystalline and nanolaminated surface coatings

589

Mechanical and tribological properties of nanostructured TiN/TiBN multilayer films

590

Mechanical and tribological properties of natural rubber reinforced with carbon blacks and Al2O3 nanoparticles

591

Mechanical and tribological properties of Nd- and Yb-SiAlON composites sintered by hot isostatic pressing

592

Mechanical and tribological properties of newly developed Tribaloy alloys

593

Mechanical and tribological properties of Ni/Al multilayers—A molecular dynamics study

594

Mechanical and tribological properties of Ni-based alloy/CeF3/graphite high temperature self-lubricating composites

595

Mechanical and tribological properties of non-hydrogenated DLC films synthesized by IBAD

596

Mechanical and tribological properties of PA/PPS blends

597

Mechanical and tribological properties of poly(hydroxyethyl methacrylate) hydrogels as articular cartilage substitutes

598

Mechanical and tribological properties of polyamide 6 and high density polyethylene polyblends with and without compatibilizer

599

Mechanical and tribological properties of polyamide 6–polyurethane block copolymer reinforced with short glass fibers

600

Mechanical and tribological properties of polymer-derived Si/C/N sub-millimetre thick miniaturized components fabricated by direct casting

601

Mechanical and tribological properties of rubber blends composed of HNBR and in situ produced polyurethane

602

Mechanical and tribological properties of self-lubricating laminated composites with flexible design

603

Mechanical and tribological properties of short-fiber-reinforced SiC composites

604

Mechanical and tribological properties of silicon carbide coating on Inconel alloy from liquid pre-ceramic precursor

605

Mechanical and tribological properties of sputter deposited nanostructured Cr–WS2 solid lubricant coatings

606

Mechanical and tribological properties of sputtered Mo–O–N coatings

607

Mechanical and tribological properties of sputtered Mo–Se–C coatings

608

Mechanical and tribological properties of Ti-DLC films with different Ti content by magnetron sputtering technique

609

Mechanical and tribological properties of TiN/Ti multilayer coating

610

Mechanical and tribological properties of titanium–aluminium–nitride films deposited by reactive close-field unbalanced magnetron sputtering

611

Mechanical and tribological properties of vapour deposited low friction coatings on Ni plated substrates

612

Mechanical and Tribological Properties of Walnut/Polypropylene Natural Composites

613

Mechanical and tribological response of ABS polymer matrix filled with graphite powder

614

Mechanical and Ultrastructural Properties of Eggshell in Two Egyptian Native Breeds of Chicken

615

Mechanical and unlubricated tribological properties of titanium-containing diamond-like carbon coatings

616

Mechanical and viscoelastic properties of chitin fiber reinforced poly(ε-caprolactone)

617

Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites

618

Mechanical and water barrier properties of agar/κ-carrageenan/konjac glucomannan ternary blend biohydrogel films

619

Mechanical and water barrier properties of starch/PVA composite films by adding nano-sized poly(methyl methacrylate-co-acrylamide) particles

620

Mechanical and water soaking properties of medium density fiberboard with wood fiber and soybean protein adhesive

621

Mechanical and water vapor barrier properties of tapioca starch/decolorized hsian-tsao leaf gum films in the presence of plasticizer

622

Mechanical and wear behavior of alloyed gray cast iron in the quenched and tempered and austempered conditions

623

Mechanical and wear behavior of quenched and tempered alloyed hypereutectic gray cast iron

624

Mechanical and wear behaviors of Al–12Si–XMg composites reinforced with in situ Mg2Si particles

625

Mechanical and wear characterization of electroless nickel-boron coatings

626

Mechanical and Wear Properties of Al-Nip Composites Produced by ARB Process

627

Mechanical and wear properties of rheocast and conventional gravity die cast A356 alloy

628

Mechanical and wear properties of ultrafine-grained pure Ti produced by multi-pass equal-channel angular extrusion

629

Mechanical anisotropy and construction of flow stress diagrams during the annealing of Zr–1% Sn alloy

630

Mechanical anisotropy and deep drawing behaviour of AZ31 and ZE10 magnesium alloy sheets Original Research Article

631

Mechanical anisotropy and segregation in Mo5Si3 studied by EBSD

632

Mechanical anisotropy due to twinning in an extruded AZ31 Mg alloy

633

Mechanical anisotropy improvement in ultrafine-grained ZK61 magnesium alloy rods fabricated by cyclic extrusion and compression

634

Mechanical anisotropy in electrodeposited nanocrystalline metal/metal composite foams

635

Mechanical anisotropy of columnar jointed basalts: An example from the Baihetan hydropower station, China

636

Mechanical anisotropy of extruded Mg–6% Al–1% Zn alloy

637

Mechanical anisotropy of extruded Mg–6% Al–1% Zn alloy

638

Mechanical anisotropy of extruded Mg–6% Al–1% Zn alloy

639

Mechanical anisotropy of shape-memory NiTi with two-dimensional networks of micro-channels Original Research Article

640

Mechanical annealing of cryorolled Zr

641

Mechanical Aortic Valve Prostheses in the Small Aortic Root: Top Hat Versus Standard CarboMedics Aortic Valve

642

Mechanical Aortic Valve Replacement in Young Women Planning on Pregnancy: Maternal and Fetal Outcomes Under Low Oral Anticoagulation, a Pilot Observational Study on a Comprehensive Pre-Operative Counseling Protocol

643

Mechanical apparatus for use in potentially explosive atmospheres formed by gases, vapours and mists

644

Mechanical Application of Lubricated Nano Porous Anodized Aluminium

645

Mechanical approach in mitigating alkali-silica reaction

646

Mechanical approach to aging and wrinkling of human facial skin based on the multistage buckling theory

647

Mechanical approach to the description of liquid–vapor interfaces at low temperatures

648

Mechanical aspects of corrosion fatigue and stress corrosion cracking

649

Mechanical aspects of crimped glass reinforced plastic (GRP) rods

650

Mechanical aspects of degree of cement bonding and implant wedge effect

651

Mechanical aspects of ferro-elastic behavior and phase composition of La0.58Sr0.4Co0.2Fe0.8O3−δ

652

Mechanical aspects of heartbeat reversal in pupae of Manduca sexta

653

Mechanical aspects of nitrile hydratase enzymatic activity. Steered molecular dynamics simulations of Pseudonocardia thermophila JCM 3095

654

Mechanical aspects of the Charpy impact test

655

Mechanical aspects of the Charpy impact test

656

Mechanical aspects of the Charpy impact test Original Research Article

657

Mechanical assessment and deformation mechanisms of aluminum foam filled stainless steel braided tubes subjected to transverse loading

658

Mechanical assessment of autogenous gas tungsten arc weldments of a super alpha-2 alloy

659

MECHANICAL ASSESSMENT OF THE HUMAN UMBILICAL VEIN FOR VASCULAR TISSUE ENGINEERING APPLICATIONS

660

Mechanical assessment of the JT-60SA TF Coils during seismic event

661

Mechanical assessment of time optimal robot motion

662

Mechanical assist strategy using the BVS 5000i for patients with heart failure

663

Mechanical Assistance for Enhancement of In Vitro Effectiveness for Hydrodynamic Thrombectomy

664

Mechanical attachment of the conductor ends in the ITER poloidal field coils

665

Mechanical attrition enhanced Ni electroplating

666

Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation

667

Mechanical behavior analysis of size-dependent micro-scaled functionally graded Timoshenko beams by strain gradient elasticity theory

668

Mechanical behavior and cell response of PCL coated α-TCP foam for cancellous-type bone replacement

669

Mechanical behavior and crack tip plasticity of a strain aging sensitive steel

670

Mechanical behavior and damage evolution in E-glass vinyl ester and carbon composites subjected to static and blast loads

671

Mechanical behavior and deformation mechanisms of Ti–2.5Cu alloy reinforced by nano-scale precipitates at 293 and 77 K

672

Mechanical behavior and deformation mechanisms of Ti–2.5Cu alloy reinforced by nano-scale precipitates at 293 and 77 K

673

Mechanical behavior and design database of packed beds for blanket designs

674

Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression

675

Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression Original Research Article

676

Mechanical behavior and electrical property of CFRC-strengthened RC beams under fatigue and monotonic loading

677

Mechanical behavior and failure mechanisms of boron carbide based three-layered laminates with weak interfaces

678

Mechanical behavior and fatigue damage of a titanium matrix composite reinforced with continuous SiC fibers

679

Mechanical behavior and fracture characterization of a monocrystalline Cu–Al–Ni subjected to thermal cycling treatments under load

680

Mechanical behavior and fracture toughness evaluation of K resin grafted with maleic anhydride compatibilized polycarbonate/K resin blends

681

Mechanical behavior and fracture toughness evaluation of maleic anhydride compatibilized short glass fiber/SEBS/polypropylene hybrid composites

682

Mechanical behavior and martensitic transformation of an Fe–Mn–Si–Al–Nb alloy

683

Mechanical behavior and microstructural analysis of alumina–titanium brazed interfaces

684

Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates Original Research Article

685

Mechanical behavior and microstructural evolution of vanadium alloys irradiated in ATR-A1

686

Mechanical behavior and microstructural evolution upon annealing of the accumulative roll-bonding (ARB) processed Al alloy 1100

687

Mechanical behavior and microstructural variation of loess under dynamic compaction

688

Mechanical behavior and microstructure during compression of semi-solid ZK60-RE magnesium alloy at high solid content

689

Mechanical behavior and microstructure evolution during steady-state dynamic recrystallization in the austenitic steel 800H

690

Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes Original Research Article

691

Mechanical behavior and microstructure of Cu54Zr22Ti18Ni6 bulk metallic glass at elevated temperatures

692

Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole

693

Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending

694

Mechanical behavior and shape memory effect of an aged NiAl–Fe alloy

695

Mechanical behavior and sliding wear assessment of Al2024/TiC metal matrix composite using Taguchi and spotted hyena optimization

696

Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy

697

Mechanical behavior and superplasticity of a severe plastic deformation processed nanocrystalline Ti–6Al–4V alloy

698

Mechanical behavior and superplasticity of a severe plastic deformation processed nanocrystalline Ti–6Al–4V alloy

699

Mechanical behavior and ultrasonic non-destructive characterization of elastic properties of cordierite-based ceramics Review Article

700

Mechanical behavior and wrinkling of lined pipes

701

Mechanical behavior at different temperatures and stresses for superelastic nickel–titanium orthodontic wires having different transformation temperatures

702

Mechanical behavior characterization of high zirconia fused-cast refractories at high temperature: Influence of the cooling stage on microstructural changes

703

Mechanical behavior during different weathering tests of the polyurethane elastomers films

704

Mechanical behavior improvement of open-pore copper foams synthesized through space holder technique

705

Mechanical behavior in NiTiNb shape memory alloys with low Nb content

706

Mechanical behavior measurement of the sheep small intestine using experimental tests

707

Mechanical behavior modeling of nanocrystalline NiAl compound by a feed-forward back-propagation multi-layer perceptron ANN

708

Mechanical behavior modeling of thaw-weakened soil

709

Mechanical behavior of (sigma) tilt grain boundaries in nanoscale Cu and Al: A quasicontinuum study

710

Mechanical behavior of (Ti,Al)N coatings exposed to elevated temperatures and an oxidative environment

711

Mechanical behavior of 2.5D (shallow bend-joint) and 3D orthogonal quartzf/silica composites by silicasol-infiltration-sintering

712

Mechanical behavior of 2.5D (shallow straight-joint) and 3D four-directional braided SiO2f/SiO2 composites

713

Mechanical behavior of 3Al2O3·2SiO2 films under nanoindentation Original Research Article

714

Mechanical behavior of a 6061 Al alloy and an Al2O3/6061 Al composite after equal-channel angular processing

715

Mechanical behavior of a bi-layer glass ionomer

716

Mechanical behavior of a bulk Cu–Ti–Zr–Ni–Si–Sn metallic glass forming nano-crystal aggregate bands during deformation in the supercooled liquid region Original Research Article

717

Mechanical behavior of a cellulose-reinforced scaffold in vascular tissue engineering

718

Mechanical behavior of a cellulose-reinforced scaffold in vascular tissue engineering

719

Mechanical behavior of a compositionally graded 300M steel

720

Mechanical Behavior of a FGM Capacitive Micro-Beam Subjected to a Heat Source

721

Mechanical behavior of a glass fiber-reinforced polymer sandwich panel with through-thickness fiber insertions

722

Mechanical behavior of a lanthanum-doped magnesium alloy at different strain rates

723

Mechanical behavior of a metastable austenitic stainless steel under simple and complex loading paths

724

Mechanical behavior of a metastable austenitic stainless steel under simple and complex loading paths

725

Mechanical behavior of a PP platelet-reinforced nanocomposite: Experimental characterization and two scale modeling of linear and non-linear response

726

Mechanical behavior of a single polymer chain in a non-solvent

727

Mechanical behavior of a superalloy with a rafted microstructure: In situ evaluation of the effective stresses and plastic strain rates of each phase

728

Mechanical behavior of a syntactic foam: experiments and modeling

729

Mechanical behavior of a three-dimensional truss material

730

Mechanical behavior of a volcanic ash soil (Typic Hapludand) under static and dynamic loading

731

Mechanical behavior of a volcanic ash soil (Typic Hapludand) under static and dynamic loading

732

Mechanical behavior of a wire-woven metal under compression

733

Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28.5Gd11Ag2.5 metallic glasses

734

Mechanical Behavior of Al-SiCnp Nanocomposite Fabricated by Hot Extrusion Technique

735

Mechanical Behavior of Al-SiCnp Nanocomposite Fabricated by Hot Extrusion Technique

736

Mechanical behavior of alumina and alumina-feldspar based ceramics in an acetic acid (4%) environment

737

Mechanical behavior of aluminum–silicon nanocomposites: A molecular dynamics study Original Research Article

738

Mechanical behavior of amorphous alloys Original Research Article

739

Mechanical behavior of an assembly of wood–geopolymer–earth bricks

740

Mechanical behavior of an asymmetrically rolled and annealed 1050-O sheet

741

Mechanical behavior of an asymmetrically rolled and annealed 1050-O sheet

742

Mechanical Behavior of an Electrostatically-Actuated Microbeam under Mechanical Shock

743

Mechanical behavior of an osteotomized mandible with distraction orthodontic devices

744

Mechanical Behavior of an Ultrafine/Nano Grained Magnesium Alloy

745

Mechanical behavior of asphalt mix: An experimental and numerical study

746

Mechanical behavior of austenitic stainless steel weld metals with microfissures

747

Mechanical Behavior of Banana Fiber Based Hybrid Bio Composites

748

Mechanical behavior of black anodic films on 7175 aluminium alloy for space applications

749

Mechanical behavior of borides formed on borided cold work tool steel

750

Mechanical behavior of bulk ultra-fine-grained Zn–Al die-casting alloys

751

Mechanical behavior of C/SiC composites under simulated space environments

752

Mechanical behavior of carbon ceramic TVO temperature sensors

753

Mechanical behavior of carbon fiber composite lattice core sandwich panels fabricated by laser cutting Original Research Article

754

Mechanical behavior of carbon fiber reinforced polyamide composites

755

Mechanical behavior of carbon fiber reinforced polyamide composites

756

Mechanical behavior of carbon fiber reinforced polymer composite sandwich panels with 2-D lattice truss cores

757

Mechanical behavior of cast and forged magnesium alloys and their microstructures

758

Mechanical behavior of cast SiCp-reinforced Al-4.5%Cu-1.5%Mg alloy

759

Mechanical behavior of cast SiCp-reinforced Al-4.5%Cu-1.5%Mg alloy

760

Mechanical behavior of cells in microinjection: A minimum potential energy study

761

Mechanical behavior of cellular borosilicate glass with pressurized Ar-filled closed pores Original Research Article

762

Mechanical behavior of cement-based materials reinforced with sisal fibers

763

Mechanical Behavior of CFRP Rod Anchors under Tensile Loading

764

Mechanical behavior of coated T91 steel in contact with lead–bismuth liquid alloy at 300 °C

765

Mechanical behavior of concrete filled double skin tubular circular deep beams

766

Mechanical Behavior of Concrete, Made with Micro-Nano Air Bubbles

767

Mechanical behavior of concretes damaged by alkali-silica reaction

768

Mechanical behavior of confined self-compacting reinforced concrete circular columns under concentric axial loading

769

Mechanical behavior of cordierite and cordierite–mullite materials evaluated by indentation techniques

770

Mechanical behavior of coronary stents investigated through the finite element method

771

Mechanical behavior of corroded reinforcing steel bars S500s tempcore under low cycle fatigue

772

Mechanical behavior of CrMo steel with tempered martensite and ferrite–bainite–martensite microstructure

773

Mechanical behavior of Cu/TiN multilayers at ambient and elevated temperatures: Stress-assisted diffusion of Cu

774

Mechanical behavior of Cu54Ni6Zr22Ti18 bulk amorphous alloy during multi-pass warm rolling

775

Mechanical behavior of diffusion-bonded bicrystals of boron-doped Ni3Al

776

Mechanical behavior of diffusion-bonded bicrystals of boron-doped Ni3Al

777

Mechanical behavior of double-C60-end-capped poly(ethylene oxide)

778

Mechanical behavior of double-step timber joints

779

Mechanical behavior of electrospun Nylon66 fibers reinforced with pristine and treated multi-walled carbon nanotube fillers

780

Mechanical behavior of electrospun polyurethane

781

Mechanical behavior of facial prosthetic elastomers after outdoor weathering

782

Mechanical behavior of FCC single crystals at finite temperatures in the presence of point defects

783

Mechanical behavior of Fe65.5Cr4Mo4Ga4P12C5B5.5 bulk metallic glass

784

Mechanical behavior of Fe75Mo5P10C7.5B2.5 bulk-metallic glass under torsional loading

785

Mechanical behavior of ferritic grade 3Cr12 stainless steel—Part 1: Experimental investigations

786

Mechanical behavior of ferritic grade 3Cr12 stainless steel—Part 2: Yield locus and hardening laws

787

Mechanical behavior of fiber-reinforced high-strength concrete subjected to high strain-rate compressive loading

788

Mechanical Behavior of Fiber-Reinforced Polymer-Wrapped Concrete Columns—Complicating Effects

789

Mechanical behavior of fluoroelastomer considering long term ageing

790

Mechanical behavior of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses

791

Mechanical behavior of functionalized nanotubes

792

Mechanical behavior of functionally graded material plates under transverse load—Part I: Analysis

793

Mechanical behavior of functionally graded material plates under transverse load—Part II: Numerical results

794

Mechanical behavior of gallium nitride nanosheets using molecular dynamics

795

Mechanical behavior of glass reinforced with SiO2 hybrid sol–gel coatings

796

Mechanical behavior of glass/epoxy tubes under combined static loading. Part I: Experimental

797

Mechanical behavior of glass/epoxy tubes under combined static loading. Part II: Validation of FEA progressive damage model

798

Mechanical behavior of groundwater seepage in karst collapse pillars

799

Mechanical behavior of hexagonal honeycombs under low-velocity impact – theory and simulations

800

MECHANICAL BEHAVIOR OF HIGH STRENGTH CONCRETE INCORPORATING SILICA FUME AND AMORPHOUS NANO-SILICA AT DIFFERENT CEMENT CONTENTS

801

Mechanical Behavior of Hybrid Connectors for Rapid-Assembling Steel-Concrete Composite Beams

802

Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers

803

Mechanical behavior of hybrid hydrogels composed of a physical and a chemical network

804

Mechanical behavior of hybrid steel-fiber self-consolidating concrete: Materials and structural aspects

805

Mechanical behavior of interlayer-bonded nanostructures obtained from bilayer graphene

806

Mechanical behavior of interlocking multi-stepped double scarf adhesive joints including void and disbond effects

807

Mechanical behavior of laser micro-machined bulk 6H–SiC diaphragms

808

Mechanical behavior of Li4SiO4 in a blanket typical geometry

809

Mechanical behavior of lightweight concrete steel deck

810

Mechanical behavior of lightweight thermoplastic fiber–metal laminates

811

Mechanical Behavior of Lumbar Spine Functional Units in Response to Cement Augmentation of Vertebra Body

812

Mechanical behavior of magnesium-steel particles composites with interpenetrating phases

813

Mechanical behavior of masonry assemblages manufactured with recycled-aggregate mortars

814

Mechanical behavior of metallic glass reinforced nanostructured tungsten composites synthesized by spark plasma sintering

815

Mechanical behavior of microstructure engineered multi-length-scale titanium over a wide range of strain rates Original Research Article

816

Mechanical behavior of MoSi2 and MoSi2 composites

817

Mechanical behavior of MoSi2 and MoSi2 composites

818

Mechanical behavior of nanocrystalline aluminum-zirconium

819

Mechanical behavior of nanocrystalline aluminum-zirconium

820

Mechanical behavior of nanocrystalline copper

821

Mechanical behavior of nanocrystalline metals and alloys Original Research Article

822

Mechanical behavior of nanoscale Cu/PdSi multilayers Original Research Article

823

Mechanical behavior of new lightweight concrete with fiber and ingredients

824

Mechanical behavior of nickel + aluminum powder-reinforced epoxy composites

825

Mechanical Behavior of Normal Concrete Reinforced with Kantharo Suter Fiber

826

Mechanical behavior of nylon 66 fibers under monotonic and cyclic loading

827

Mechanical behavior of PACVD TiC–amorphous carbon composite layers

828

MECHANICAL BEHAVIOR OF PARTICLE FILLED ELASTOMERS

829

MECHANICAL BEHAVIOR OF PARTICLE FILLED ELASTOMERS

830

Mechanical behavior of phenolic-based composites reinforced with multi-walled carbon nanotubes Original Research Article

831

Mechanical behavior of piassava fiber reinforced castor oil polymer mortars

832

Mechanical behavior of pistachio nut and its kernel under compression loading Original Research Article

833

Mechanical behavior of plasma sprayed functionally graded YSZ/NiCoCrAlY composite coatings

834

Mechanical behavior of polystyrene grafted carbon nanotubes/polystyrene nanocomposites

835

Mechanical behavior of porous commercially pure Ti and Ti–TiB composite materials manufactured by selective laser melting

836

Mechanical behavior of porous magnesium/alumina composites with high strength and low density

837

Mechanical behavior of post-restored upper canine teeth: A 3D FE analysis

838

Mechanical behavior of prosthesis in Toucan beak (Ramphastos toco)

839

Mechanical Behavior of Pseudo-Semi-Interpenetrating Polymer Networks Based on Double-C60-End-Capped Poly(ethylene oxide) and Poly(methyl methacrylate)

840

Mechanical behavior of recycled polyethylene/piassava fiber composites

841

Mechanical behavior of reduced-activation and conventional martensitic steels after neutron irradiation in the range 250–450°C

842

Mechanical behavior of sandwich composite beams made of foams and functionally graded materials

843

Mechanical behavior of sandwich panels with hollow Al–Si tubes core construction

844

Mechanical behavior of sandwich panels with tetrahedral and Kagome truss cores fabricated from wires

845

Mechanical behavior of self-assembled carbon nanotube reinforced nylon 6,6 fibers

846

Mechanical Behavior of Self-Compacting Reinforced Concrete Including Synthetics and Steel Fibers

847

Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Albased alloy

848

Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Al-based alloy Original Research Article

849

Mechanical behavior of SiCf/SiC composites with alternating PyC/SiC multilayer interphases

850

Mechanical behavior of silicon carbide fiber-reinforced strontium aluminosilicate glass–ceramic composites

851

Mechanical behavior of silicon carbide fiber-reinforced strontium aluminosilicate glass–ceramic composites

852

Mechanical behavior of stiff coating on glass under sliding contact

853

Mechanical behavior of submicron-grained γ-TiAl-based alloys at elevated temperatures

854

Mechanical Behavior of the Copper Matrix Composite Reinforced by Steel Particles

855

Mechanical behavior of the female sacroiliac joint and influence of the anterior and posterior sacroiliac ligaments under sagittal loads

856

Mechanical behavior of the ITER TF model coil ground insulation system after reactor irradiation Original Research Article

857

Mechanical behavior of the sandwich structures with carbon fiber-reinforced pyramidal lattice truss core

858

Mechanical behavior of thermo-responsive orthodontic archwires

859

Mechanical behavior of three generations of 100% repeated recycled coarse aggregate concrete

860

Mechanical behavior of three nickel-titanium rotary files: A comparison of numerical simulation with bending and torsion tests

861

Mechanical behavior of Ti cold spray coatings determined by a multi-scale indentation method

862

Mechanical behavior of Ti–6Al–4V at high and moderate temperatures—Part I: Experimental results

863

Mechanical behavior of Ti–6Al–4V at high and moderate temperatures—Part I: Experimental results

864

Mechanical behavior of Ti–6Al–4V at high and moderate temperatures—Part II: constitutive modeling

865

Mechanical behavior of Ti–6Al–4V at high and moderate temperatures—Part II: constitutive modeling

866

Mechanical behavior of TiN/TiC multilayer coatings fabricated by plasma assisted chemical vapor deposition on AISI H13 hot work tool steel

867

Mechanical behavior of TiNi shape memory alloy under axial dynamic compression

868

Mechanical behavior of transparent nanofibrillar cellulose–chitosan nanocomposite films in dry and wet conditions

869

Mechanical behavior of tungsten preform reinforced bulk metallic glass composites

870

Mechanical Behavior of TWIP Steel in High Strain Rate Torsional Test

871

Mechanical behavior of two kinds of rubber materials

872

Mechanical behavior of two-dimensional carbon/carbon composites with interfacial carbon layers Original Research Article

873

Mechanical behavior of two-step hot-pressed ZrB2-based composites with ZrSi2

874

Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling

875

Mechanical behavior of various nanoparticle filled composites at low-velocity impact

876

Mechanical behavior of zirconia/alumina composites

877

Mechanical behavior of zirconium diboride–silicon carbide ceramics at elevated temperature in air

878

Mechanical behavior of Zr-based and Ta-based micropillars

879

Mechanical behavior of δ-phase Pu–Ga alloys. Part I: Constitutive model

880

Mechanical behavior of δ-phase Pu–Ga alloys. Part II: Model verification and application

881

Mechanical behavior of Σ tilt grain boundaries in nanoscale Cu and Al: A quasicontinuum study Original Research Article

882

Mechanical behavior on residual stress in a tungsten-copper duplex structure after cyclic heat loads for a divertor application

883

Mechanical behavior prediction of TWIP steel in plastic deformation

884

Mechanical behavior related to various bonding states in amorphous Si–C–N hard films

885

Mechanical behavior under cyclic loading of the 18R-6R high-hysteresis martensitic transformation in Cu-Zn-Al alloys with nanoprecipitates

886

Mechanical behavior under nanoindentation of a new Ni-based glassy alloy produced by melt-spinning and copper mold casting

887

Mechanical behavior, wear surface morphology, and clinical performance of UHMWPE acetabular components after 10 years of implantation

888

Mechanical behaviors of Al2O3 nanoparticles reinforced polyetheretherketone

889

Mechanical behaviors of diamond reinforced Ti-based bulk metallic glassy composites prepared by spark plasma sintering

890

Mechanical behaviors of Kevlar 49 fabric subjected to uniaxial, biaxial tension and in-plane large shear deformation

891

Mechanical behaviors of partially devitrified ti-based bulk metallic glass

892

Mechanical behaviors of polypropylene/carbon nanotube nanocomposites: The effects of loading rate and temperature

893

Mechanical behaviors of porous metals under biaxial tensile loads

894

Mechanical behaviors of quasi-ordered entangled aluminum alloy wire material

895

Mechanical behaviors of the dispersion nuclear fuel plates induced by fuel particle swelling and thermal effect I: Effects of variations of the fuel particle volume fractions

896

Mechanical behaviors of the dispersion nuclear fuel plates induced by fuel particle swelling and thermal effect II: Effects of variations of the fuel particle diameters

897

Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels Review Article

898

Mechanical behaviour and biocompatibility of poly(1-vinyl-2-pyrrolidinone)–gelatin IPN hydrogels

899

Mechanical behaviour and development of dislocation arrangements of f.c.c. single crystals fatigued at 77 K

900

Mechanical behaviour and development of dislocation arrangements of f.c.c. single crystals fatigued at 77 K

901

Mechanical behaviour and energy absorption of closed-cell aluminium foam panels in uniaxial compression

902

Mechanical behaviour and essential work of fracture of halloysite nanotubes filled polyamide 6 nanocomposites

903

Mechanical behaviour and failure mechanisms of a binary Mg6%Zn alloy reinforced with SiC particulates

904

Mechanical behaviour and failure mechanisms of a binary Mg6%Zn alloy reinforced with SiC particulates

905

Mechanical behaviour and fibre dispersion of hybrid steel fibre reinforced self-compacting concrete

906

Mechanical behaviour and fracture mechanism of flux grown holmium orthoferrite single crystals Original Research Article

907

Mechanical behaviour and in situ observation of shear bands in ultrafine grained Pd and Pd–Ag alloys Original Research Article

908

Mechanical behaviour and microstructural characterizations of ultrafine grained Zircaloy-2 processed by cryorolling

909

Mechanical behaviour and microstructural evolution in superplastic Al–Li–Mg–Cu–Zr AA8090 Original Research Article

910

Mechanical behaviour and microstructural evolution of constrained groove pressed nickel sheets

911

Mechanical behaviour and microstructural evolution of magnesium alloy AZ31 in tension at different temperatures

912

Mechanical Behaviour and Microstructure Evolution of Superplastic Mg-8.4 wt pct Li Alloy and Effect of Grain Size and Phase Ratio on Its Elongation

913

Mechanical behaviour and non-linear analysis of short beams using softened truss and direct strut & tie models

914

Mechanical Behaviour and Split Resistance of Chestnut under Compressive Loading

915

Mechanical behaviour and structure of light-cured special tray materials

916

Mechanical behaviour and the evolution of the dislocation structure of copper polycrystal deformed under fatigue–tension and tension–fatigue sequential strain paths

917

Mechanical behaviour and the evolution of the dislocation structure of copper polycrystal deformed under fatigue–tension and tension–fatigue sequential strain paths

918

Mechanical behaviour and thermal and electrical properties of foam glass

919

Mechanical behaviour and thermal conductivity of mortars containing waste rubber particles

920

Mechanical behaviour and underlying deformation mechanisms in coarse- and ultrafine-grained Zn over a wide range of strain rates

921

Mechanical behaviour at large strain of polycarbonate nanocomposites during uniaxial tensile test

922

Mechanical behaviour characterisation of silicon and effect of loading rate on pop-in: A nanoindentation study under ultra-low loads

923

Mechanical behaviour in tension of cracked glass bridged by an elastomeric ligament Original Research Article

924

Mechanical behaviour modelling of balloon-expandable stents

925

Mechanical behaviour modelling of fractured nuclear fuel pellets Original Research Article

926

Mechanical behaviour of a fuel cell stack under vibrating conditions linked to aircraft applications part I: Experimental

927

Mechanical behaviour of a fuel cell stack under vibrating conditions linked to aircraft applications part II: Three-dimensional modelling

928

Mechanical behaviour of a low-clay translucent whiteware

929

Mechanical behaviour of a new acrylic radiopaque iodine-containing bone cement

930

Mechanical behaviour of a silicon nitride particulate ceramic composite

931

Mechanical behaviour of a solid with many stress corrosion growing cracks

932

Mechanical behaviour of a stone masonry bridge assessed using an implicit discrete element method

933

Mechanical behaviour of a two-phase material from the behaviour of its components: Interface modelling by finite element method

934

Mechanical behaviour of agro-residue reinforced poly(3-hydroxybutyrate-co-3-hydroxyvalerate), (PHBV) green composites: A comparison with traditional polypropylene composites

935

Mechanical behaviour of Al3Ti intermetallic and L12 phases on its basis

936

Mechanical behaviour of alloys containing heterogeneously distributed particles: modelling with Delaunay triangulation Original Research Article

937

Mechanical behaviour of amorphous W–Si–N sputtered films after thermal annealing at increasing temperatures

938

Mechanical behaviour of an undisturbed soil subjected to loadings: Effects of load and contact area

939

Mechanical Behaviour of Apples, and Damage during Sorting and Packaging

940

Mechanical behaviour of apricot pit under compression loading Original Research Article

941

Mechanical behaviour of brittle matrix composites: a homogenization approach

942

Mechanical behaviour of cast-in situ reinforced concrete slabs with control joints

943

Mechanical behaviour of cementitious matrix composites

944

Mechanical behaviour of cement-treated sand

945

Mechanical behaviour of ceramic oxygen ion-conducting membranes

946

Mechanical behaviour of circular and triangular glass fibres and their composites

947

Mechanical Behaviour of Cissus Quadrangularis/Basalt Fibre Reinforced Hybrid Biocomposite for Bone Implantations

948

Mechanical behaviour of composite artificial tendons and ligaments

949

Mechanical behaviour of concrete made with fine recycled concrete aggregates

950

Mechanical behaviour of connections between wood framed shear walls and foundations under monotonic and cyclic load

951

Mechanical behaviour of conventional and negative Poisson’s ratio thermoplastic polyurethane foams under compressive cyclic loading

952

Mechanical behaviour of corn flour and starch–zein based materials in the glassy state: A matrix–particle interpretation

953

Mechanical behaviour of cp-magnesium with duplex hydroxyapatite and PEO coatings

954

Mechanical Behaviour of Cyclically Heated Fine Grained Rock

955

Mechanical behaviour of diamond reinforced metals

956

Mechanical behaviour of directionally solidified alumina/aluminium titanate ceramics Original Research Article

957

Mechanical behaviour of DNA molecules—Elasticity and migration

958

Mechanical behaviour of dry fabric reinforcements. 3D simulations versus biaxial tests

959

Mechanical behaviour of dual-phase high-strength steel under high strain rate tensile loading

960

Mechanical behaviour of earthen materials: A comparison between earth block masonry, rammed earth and cob

961

Mechanical behaviour of endodontic restorations with multiple prefabricated posts: A finite-element approach

962

mechanical behaviour of femoral diaphyseal cortical bone using the computed tomography data: a numerical investigation

963

Mechanical behaviour of ferritic ODS steels – Temperature dependancy and anisotropy

964

Mechanical behaviour of ferrocement composites: an experimental investigation

965

Mechanical behaviour of ferrocement composites: an experimental investigation

966

Mechanical behaviour of ferroelectric films on perovskite substrate

967

Mechanical behaviour of fine grained sediments: experimental compaction and three-dimensional constitutive model

968

Mechanical behaviour of fired clay materials subjected to freeze–thaw cycles

969

Mechanical behaviour of glass and carbon fibre reinforced composites at varying strain rates

970

Mechanical behaviour of granular materials used in analogue modelling: insights from grain characterisation, ring-shear tests and analogue experiments

971

Mechanical behaviour of hamstring muscles in low-back pain patients and control subjects

972

Mechanical behaviour of hard PVD multilayered coatings

973

Mechanical Behaviour of Hazelnut under Compression Loading

974

Mechanical behaviour of high nitrogen stainless steel reinforced conductor for use in pulsed high field magnets at cryogenic temperature Original Research Article

975

Mechanical behaviour of historic masonry structures strengthened by bed joints structural repointing

976

Mechanical behaviour of hollow-tube stackings: Experimental characterization and modelling of the role of their constitutive material behaviour Original Research Article

977

Mechanical behaviour of hot and warm formed microalloyed steels

978

Mechanical behaviour of iron oxide scale: Experimental and numerical study

979

Mechanical behaviour of jute and polypropylene blended needle-punched fabrics

980

Mechanical behaviour of jute and polypropylene blended needle-punched fabrics

981

Mechanical behaviour of jute cloth/wool felts hybrid laminates

982

Mechanical behaviour of laminated composite beam by the new multi-layered laminated composite structures model with transverse shear stress continuity

983

Mechanical behaviour of landfill barrier systems

984

Mechanical behaviour of landfill barrier systems

985

Mechanical behaviour of lime based mortars after surface consolidation

986

Mechanical behaviour of macro-dispersed inert matrix fuels

987

Mechanical behaviour of material of thermal power plant steam superheater collector after exploitation

988

Mechanical behaviour of metallic thin films on polymeric substrates and the effect of ion beam assistance on crack propagation

989

Mechanical behaviour of metallic thin films on polymeric substrates and the effect of ion beam assistance on crack propagation Original Research Article

990

Mechanical behaviour of MgO–C refractory bricks evaluated by stress–strain curves

991

Mechanical behaviour of mullite composites reinforced with mullite fibres

992

Mechanical behaviour of mullite composites reinforced with mullite fibres

993

Mechanical behaviour of nanocrystalline iron and nickel in the quasi-static and low frequency anelastic regime

994

Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil

995

Mechanical behaviour of nanoporous superalloy membranes Original Research Article

996

Mechanical behaviour of natural cow leather in tension

997

Mechanical behaviour of Nd:YAG laser welded superelastic NiTi

998

Mechanical behaviour of NiAl and Ni3Al ordered compounds entering the nano-grain size regime

999

Mechanical behaviour of NiTi parts prepared by powder metallurgical methods

1000

Mechanical behaviour of NiTi parts prepared by powder metallurgical methods

بازگشت