ليست عنوان مقالات لاتين Optimization of operation parameters of refrigeration cycle using particle swarm and NLP techniques Optimization of the core configuration design using a hybrid artificial intelligence algorithm for research reactors Original Research Article

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Optimization of operation parameters of refrigeration cycle using particle swarm and NLP techniques

2

Optimization of operational and design parameters of plane reflector-tilted flat plate solar collector systems

3

Optimization of operational conditions for biodegradation of chlorophenols by laccase-polyacrilonitrile beads system

4

OPTIMIZATION OF OPERATIONAL PARAMETERS FOR DECOLORIZATION AND DEGRADATION OF C. I. REACTIVE BLUE 29 BY OZONE

5

Optimization of Operational Parameters in Rhamnolipid Production by Pseudomonas aeruginosa MM1011 in a Miniaturized Shaken Bioreactor

6

Optimization of Operations in Supply Chain Systems Using Hybrid Systems Approach and Model Predictive Control

7

Optimization of optical cross-connects with wave-mixing conversion

8

Optimization of optical filters for ITER edge Thomson scattering diagnostics

9

Optimization of optical klystron for coherent harmonic generation FEL

10

Optimization of optical klystron for coherent harmonic generation FEL

11

Optimization of optical lens-controlled scanning electron microscopic resolution using generalized regression neural network and genetic algorithm

12

Optimization of order policies in supply networks

13

Optimization of Order Quantity for Multi-Product from Multi-Supplier with Discounted Prices

14

Optimization of order-up-to-S policies for two-level inventory systems with compound Poisson demand

15

Optimization of organic and conventional olive agricultural practices from a Life Cycle Assessment and Life Cycle Costing perspectives

16

Optimization of organic compounds removal from Wastewater by Electrocoagulation

17

Optimization of organic light-emitting diode containing hydrochlorosilole electron transport layer through impedance spectroscopy analysis

18

Optimization of organic solar cells with thin film Au as anode

19

Optimization of organosolv pretreatment of starch waste from sugar palm trunk (Arenga pinnata) for the production of reducing sugar

20

Optimization of orientation for higher yield of solar still for a given location

21

Optimization of Orius majusculus release: photoperiodic sensitivity at different temperatures and storage of diapausing adults

22

Optimization of Orthogonal Polyphase Coding Waveform for MIMO Radar based on Evolutionary Algorithms

23

Optimization of Oscillation Model for Slab Continuous Casting Mould Based on Mould Friction Measurements in Plant Trial Original Research Article

24

Optimization of osmotic dehydration of bananas followed by air-drying

25

Optimization of osmotic dehydration of cantaloupe using desired function methodology Original Research Article

26

OPTIMIZATION OF OSMOTIC DEHYDRATION OF HONEYDEW USING RESPONCE SURFACE METHODOLOGY

27

Optimization of osmotic dehydration of potato using response surface methodology Original Research Article

28

Optimization of osmotic dehydration of tomatoes in a ternary system followed by air-drying Original Research Article

29

Optimization of osmotic dehydration of yam bean (Pachyrhizus erosus) using an orthogonal experimental design Original Research Article

30

Optimization of Outfall Systems in RO Desalination Plants (Case study: Bandar Abbas Desalination)

31

Optimization of oven toasting for improving crispness and other quality attributes of ready to eat potato-soy snack using response surface methodology Original Research Article

32

Optimization of oversized waveguide components using a genetic algorithm

33

Optimization of Oxidation Pond Efficiency in Animal Farm Wastewater Treatment

34

Optimization of oxidative bioconversions catalyzed by phenylacetone monooxygenase from Thermobifida fusca

35

Optimization of oxidative desulfurization of dibenzothiophene using acidic ionic liquid as catalytic solvent

36

Optimization of oxidative desulfurization of thiophene using Cu/titanium silicate-1 by box-behnken design

37

Optimization of ozone and coagulation processes for bromate control in Istanbul drinking waters Original Research Article

38

Optimization of ozone treatment of fresh-cut green leaf lettuce Original Research Article

39

Optimization of p/n multilayer structure for organic photoreceptor device

40

Optimization of pack parameters for hot deformation of TiAl alloys

41

Optimization of PACl dose to reduce RO cleaning in an IMS Original Research Article

42

Optimization of palm kernel shell torrefaction to produce energy densified bio-coal

43

Optimization of parabolic trough solar collectors integrated with two stage Rankine cycle

44

Optimization of parallel machine scheduling problem with human resiliency engineering: A new hybrid meta-heuristics approach

45

Optimization of parameter settings to achieve improved moisture absorption properties of Bamboo fibre composites

46

Optimization of parameter settings to achieve improved tensile and impact strength of bamboo fibre composites

47

Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching

48

Optimization of parameters affecting separation of gas mixture of O2, N2, CO2 and CH4 by PMP membrane modified with TiO2, ZnO and Al2O3 nanoparticles

49

Optimization of parameters and adsorption mechanism of thiabendazole fungicide by a montmorillonite of North Patagonia, Argentina

50

Optimization of parameters for adsorption of metal ions onto rice husk ash using Taguchi’s experimental design methodology

51

Optimization of parameters for adsorption of metal ions onto rice husk ash using Taguchiʹs experimental design methodology

52

Optimization of parameters for an aluminum melting furnace using the Taguchi approach

53

Optimization of parameters for anaerobic co-metabolic degradation of TBBPA

54

Optimization of parameters for curve interpolation by cubic splines

55

Optimization of parameters for deposition of Ga-doped ZnO films by DC reactive magnetron sputtering using Taguchi method

56

Optimization of Parameters for Separation of the Medium Rare Earth Element Group from Other Rare Earth Elements by Precipitation Method Using Box- Behken Design

57

Optimization of parameters for silicon planar source of modulated infrared radiation

58

Optimization of parameters for the analysis of aromatic amines in finger-paints

59

Optimization of parameters for the fabrication of gelatin nanoparticles by the Taguchi robust design method

60

Optimization of Parameters for the Friction Stir Processing and Welding of AA1050 Aluminum Alloy

61

Optimization of parameters for the supercritical fluid extraction in the determination of N-nitrosamines in rubbers

62

Optimization of parameters for the synthesis of bimodal Ag nanoparticles by Taguchi method

63

Optimization of parameters for the synthesis of zinc oxide nanoparticles by Taguchi robust design method

64

Optimization of parameters in 16-slice CT-scan protocols for reduction of the absorbed dose

65

Optimization of parameters of high-performance displacement chromatography for separation of soybean phosphatidylcholine and phosphatidylethanolamine

66

Optimization of parameters used for freshwater survey

67

Optimization of parametric performance of a PEMFC

68

Optimization of partial constrained layer damping treatment for vibrational energy minimization of vibrating beams

69

Optimization of partial interaction in bolted side-plated reinforced concrete beams

70

Optimization of partial nitritation in a continuous flow internal loop airlift reactor

71

Optimization of Particle Dimensions for High Efficiency in Capillary Electrochromatography

72

Optimization of Pass Schedule in Hot Strip Rolling Original Research Article

73

Optimization of passivation layers for corrosion protection of silicon-based microelectrode arrays

74

Optimization of passive design measures for residential buildings in different Chinese areas

75

Optimization of passive solar design strategies: A review

76

Optimization of passively damped composite structures

77

Optimization of Pasta Formulation Containing Wheat, Quinoa Flour and Purslane Leaves Powder

78

Optimization of Pb(II) Adsorption onto Australian Pine Cones-Based Activated Carbon by Pulsed Microwave Heating Activation

79

Optimization of Pb(II) biosorption by Robinia tree leaves using statistical design of experiments

80

Optimization of PCR protocol in microsatellite analysis with silver and SYBR® stains

81

Optimization of PCR-based methods for rapid detection of Campylobacter jejuni, Campylobacter coli and Yersinia enterocolitica serovar 0:3 in wastewater samples

82

Optimization of peak power of passively Q-switched lasers by taking into account intracavity laser spatial distribution

83

Optimization of pectin extraction assisted by microwave from apple pomace using response surface methodology Original Research Article

84

Optimization of pectin extraction from lemon by-product with acidified date juice using response surface methodology

85

Optimization of pectin extraction from lemon by-product with acidified date juice using response surface methodology

86

Optimization of Pectin Extractions from Walnut Green Husks and Characterization of the Extraction Physicochemical and Rheological Properties

87

Optimization of Pectinase Production from Pesudomonas sp. Isolated from Iraqi Soil

88

Optimization of PECVD SiN:H films for silicon solar cells

89

Optimization of pelletisation and combustion in a boiler of 17.5 kWth for vine shoots and industrial cork residue

90

Optimization of PEM fuel cell flow channel dimensions—Mathematic modeling analysis and experimental verification

91

Optimization of PEM fuel cell flow field via local current density measurement

92

Optimization of peptide and protein separation with a monolithic reversed-phase column and application to arsenic-binding studies

93

Optimization of peptide-based inhibitors of prostate-specific antigen (PSA) as targeted imaging agents for prostate cancer Original Research Article

94

Optimization of perfluoro nano-scale emulsions: The importance of particle size for enhanced oxygen transfer in biomedical applications

95

Optimization of performance characteristics in a class of irreversible chemical pumps

96

Optimization of performance characteristics of a mixed dye based photogalvanic cell for efficient solar energy conversion and storage

97

Optimization of performance measures in Doroodzan Irrigation Network

98

Optimization of Performance of Coarse Aggregate-Assisted Single-Slope Solar Still via Taguchi Approach

99

Optimization of performance of monolithic capillary column in gas chromatographic separations

100

Optimization of periodic testing frequency of a reactor protection system based on a risk-cost model and public risk perception

101

Optimization of peripheral finned-tube evaporators using entropy generation minimization

102

Optimization of peripheral non-round cylindrical grinding via an adaptable constant-temperature process

103

Optimization of Perturb and Observe Maximum Power Point Tracking Method

104

Optimization of pGEX System to Express and Isolate Mycobacterium tuberculosis Inclusion Body Protein in Combining withModified Refolding Method

105

Optimization of pH controlled liquid hot water pretreatment of corn stover

106

Optimization of phase-modulated excimer-laser annealing method for growing highly-packed large-grains in Si thin-films

107

Optimization of Phenanthrene-degradation by Dietzia Cinnamea AP for Bioremediation Applications

108

Optimization of phenol adsorption onto bentonite by factorial design methodology

109

Optimization of phenol biodegradation by efficient bacteria isolated from petrochemical effluents

110

Optimization of phenol biodegradation by efficient bacteria isolated from petrochemical effluents

111

Optimization of Phenolic Compound Extraction from Pistachio Green Hulls: Influence of Blanching, Harvest Time, Solvent Concentration, and Extraction Method

112

Optimization of phenolic compounds analysis by capillary electrophoresis

113

Optimization of phenolics and dietary fibre extraction from date seeds

114

Optimization of phosphate removal in anodizing aluminium wastewater

115

Optimization of Phospholipase A1 Immobilization on Plasma Surface Modified Chitosan Nanofibrous Mat

116

Optimization of Phosphoric Acid-Based Emitter Formation on Silicon Wafer

117

Optimization of phosphorus localization by EFTEM of nucleic acid containing structures

118

optimization of photo catalytic activity of zno nano composites by surface modification with cu metal using facile hydrothermal approach

119

Optimization of photocatalytic performance of TiO2 coated glass microspheres using response surface methodology and the application for degradation of dimethyl phthalate

120

Optimization of photocatalytic production of hydrogen from hydrogen sulfide in alkaline solution using response surface methodology Original Research Article

121

Optimization of Photocatalytic Reduction of Cr(VI) in Water with Nano ZnO/Todorokite as a Catalyst: Using Taguchi Experimental Design

122

Optimization of photodynamic therapy response by survivin gene knockdown in human metastatic breast cancer T47D cells

123

Optimization of photo-hydrogen production based on cheese whey spent medium

124

Optimization of photoluminescence properties of Porous silicon by adding gold nanoparticles

125

Optimization of photonic nanostructures Original Research Article

126

Optimization of photosynthetic hydrogen production from acetate by Rhodobacter sphaeroides RV

127

Optimization of photosynthetic hydrogen yield from platinized photosystem I complexes using response surface methodology

128

Optimization of phototrophic hydrogen production by Rhodopseudomonas palustris PBUM001 via statistical experimental design

129

Optimization of phthalic acid batch biodegradation and the use of modified Richards model for modelling degradation

130

Optimization of phycocyanin extraction from Spirulina platensis using factorial design

131

Optimization of Physical and Imaging Properties of Flat Bread Enriched with Quinoa Flour

132

Optimization of physical and mechanical properties for chitosan–nanocellulose biocomposites

133

Optimization of physical filtering for selective high temperature H2 sensors

134

Optimization of physical flows in an automotive manufacturing plant: some experiments ، issues

135

Optimization of Physical Mixtures of Pt/ZrO2 and H-Form Zeolites for Catalysis of the NO-H2-O2 Reaction

136

Optimization of physicochemical characteristics of a lithium anode interface for high-efficiency cycling: an effect of electrolyte temperature

137

Optimization of Physicochemical Characteristics of Corn-Based Extruded Snacks Containing Pomegranate Seed Powders

138

Optimization of physicochemical parameters for bioleaching of sphalerite by Acidithiobacillus ferrooxidans using shaking bioreactors

139

Optimization of physicochemical parameters in the biofabrication of gold nanoparticles using marine macroalgae Padina tetrastromatica and its catalytic efficacy in the degradation of organic dyes

140

Optimization of physico-chemical properties of gelatin extracted from fish skin of rainbow trout (Onchorhynchus mykiss)

141

Optimization of Physiochemical Parameters during Bioremediation of Synthetic Dye by Marasmius cladophyllus UMAS MS8 Using Statistical Approach

142

Optimization of Phytase Concentration from Aspergillus ficuum for Phytate-bound Phosphorus Release in Cereal Meals

143

Optimization of phytase production by Penicillium purpurogenum GE1 under solid state fermentation by using Box–Behnken design

144

Optimization of PI parameters for DSP-based permanent magnet brushless motor drive using response surface methodology

145

Optimization of PIC codes by improved memory management

146

Optimization of PID Controller with Supervisory Fuzzy Control for Industrial Robots

147

Optimization of pigment dyeing process of high performance fibers using feed-forward bottleneck neural networks mapping technique Original Research Article

148

Optimization of pilot tones using differential evolution algorithm in MIMO-OFDM systems

149

Optimization of pinhole collimator for small animal SPECT using Monte Carlo simulation

150

Optimization of pipeline transport for CO2 sequestration

151

Optimization of piperazinebenzylamines with a N-(1-methoxy-2-propyl) side chain as potent and selective antagonists of the human melanocortin-4 receptor

152

OPTIMIZATION OF PLACEMENT/VOLTAGE OF PIEZOELECTRIC ACTUATORS ON AN L-SHAPE BEAM USING PARTICLE SWARM OPTIMIZATION ALGORITHM

153

Optimization of Planar Five bar Parallel Mechanism via Self-reconfiguration Method

154

Optimization of planning an advertising campaign of goods and services

155

Optimization of plant coverage in relation to water balance in the Loess Plateau of China

156

Optimization of plant growth regulators for in vitro shoot proliferation of apple cv. Abbasiʼ using response surface method

157

Optimization of plant growth-promoting bacteria-assisted phytostabilization of mine tailings

158

Optimization of plant growth-promoting bacteria-assisted phytostabilization of mine tailings

159

Optimization of plasma enhanced chemical vapor deposition process parameters for hardness improvement of diamond-like carbon coatings

160

Optimization of plasma initiation in the ITER Tokamak

161

Optimization of plasma parameters for high rate deposition of titanium nitride films as protective coating on bell-metal by reactive sputtering in cylindrical magnetron device

162

Optimization of plasma performance for a helical fusion reactor

163

Optimization of plasma spray parameters on the mechanical properties of agglomerated Al2O3–13%TiO2 coated mild steel

164

Optimization of plasma-assisted chemical vapour deposition hard coatings for their application in aluminium die-casting

165

Optimization of plasma-deposited silicon oxinitride films for optical channel waveguides

166

Optimization of plasma-enhanced chemical vapor deposition parameters for the growth of individual vertical carbon nanotubes as field emitters Original Research Article

167

Optimization of plasmon excitation at structured apertures

168

Optimization of plastic conical shells loaded by a rigid central boss

169

Optimization of Plastic Injection Molding Process by Combination of Artificial Neural Network and Genetic Algorithm

170

Optimization of plate-fin heat exchangers by an improved harmony search algorithm

171

Optimization of platinum adhesion in electrochemical etching process for multi-sensor systems

172

Optimization of platinum adhesion in electrochemical etching process for multi-sensor systems

173

Optimization of platinum filament micropyrolyzer for studying primary decomposition in cellulose pyrolysis

174

Optimization of platinum filament micropyrolyzer for studying primary decomposition in cellulose pyrolysis

175

Optimization of platinum/iridium ratio in thin sputtered films for PEMFC cathodes

176

Optimization of pleated filter designs

177

Optimization of Pleated Filter Designs Using a Finite-Element Numerical Model

178

Optimization of ply angles in laminated composite structures by a hybrid, asynchronous, parallel evolutionary algorithm

179

Optimization of PM Segments Shift Angles for Minimizing the Cogging Torque ‎of YASA-AFPM Machines Using Response Surface Methodology

180

Optimization of PM stabilization for balanced sensitivities and variations of spin valve heads

181

Optimization of polarimetry sensitivity for X-ray CCD

182

Optimization of polarimetry sensitivity for X-ray CCD

183

Optimization of polling systems with Bernoulli schedules

184

Optimization of poly(1,4-cyclohexylidene cyclohexane-1,4-dicarboxylate) (PCCD) preparation for increased crystallinity

185

Optimization of poly(l-lactic acid)/segmented polyurethane electrospinning process for the production of bilayered small-diameter nanofibrous tubular structures

186

Optimization of poly-3-methylthiophene to be used in advance polymer batteries

187

Optimization of polyhydroxyalkanoates fermentations with on-line capacitance measurement

188

Optimization of Polymer Electrolyte Membrane Fuel Cell Performance by Geometrical Changes

189

Optimization of polymer flood performance by preflush injection - numerical investigation

190

Optimization of Polymerase Chain Reaction (PCR) of Mitochondrial Cytochrome c Oxidase I (COI) Gene in Two Bornean Fanged Frogs

191

Optimization of polymeric host composition for polymer-based electrophosphorescent devices

192

Optimization of polymeric triiodide membrane electrode based on clozapine–triiodide ion-pair using experimental design

193

Optimization of Polynomial Functions

194

Optimization of polyol ester production by transesterification of Jatropha-based methyl ester with trimethylolpropane using Taguchi design of experiment

195

Optimization of polysaccharides (ABP) extraction from the fruiting bodies of Agaricus blazei Murill using response surface methodology (RSM)

196

Optimization of polysaccharides (ABP) extraction from the fruiting bodies of Agaricus blazei Murill using response surface methodology (RSM)

197

Optimization of polysaccharides extraction from Clematis huchouensis Tamura and its antioxidant activity

198

Optimization of polysaccharides extraction from Gynostemma pentaphyllum Makino using Uniform Design

199

Optimization of polysaccharides extraction from seeds of Pharbitis nil and its anti-oxidant activity

200

Optimization of polysaccharides extraction from Trametes robiniophila and its antioxidant activities

201

Optimization of polysaccharides from Zagros oak leaf using RSM: Antioxidant and antimicrobial activities

202

Optimization of polystyrene-supported triphenylphosphine catalysts for aza-Morita–Baylis–Hillman reactions

203

Optimization of Polyurethane Foams for Enhanced Stir Bar Sorptive Extraction of Triazinic Herbicides in Water Matrices

204

Optimization of polyurethane membranes: Morphology and structure studies

205

Optimization of polyurethane-based hollow fiber membranes morphology and performance by post-treatment methods Original Research Article

206

Optimization of poly-ε-lysine production by Streptomyces noursei NRRL 5126

207

Optimization of Pooling Technique for Hepatitis C Virus Nucleic Acid Testing (NAT) in Blood Banks

208

Optimization of porosity formation in AlSi9Cu3 pressure die castings using genetic algorithm analysis

209

Optimization of porous current collectors for PEM water electrolysers

210

Optimization of Porous Silicon Conditions for DNA-based Biosensing via Reflectometric Interference Spectroscopy

211

Optimization of porous silicon multilayer as antireflection coatings for solar cells

212

Optimization of porous silicon preparation technology for SERS applications

213

Optimization of positively charged gold nanoparticles synthesized using a stainless-steel mesh and its application for colorimetric hydrogen peroxide detection

214

Optimization of Post-Based Merit Salary Based on CPI and University Characteristic Data

215

Optimization of post-column reactor radius in capillary high performance liquid chromatography: Effect of chromatographic column diameter and particle diameter

216

Optimization of power coefficient on a horizontal axis wind turbine using bem theory

217

Optimization of power deposition and a heating strategy for external ultrasound thermal therapy

218

Optimization of power in the problems of active control of sound Original Research Article

219

Optimization of power management in an hybrid electric vehicle using dynamic programming Original Research Article

220

Optimization of power output and study of electron beam energy spread in a Free Electron Laser oscillator

221

Optimization of power output and study of electron beam energy spread in a Free Electron Laser oscillator

222

OPTIMIZATION OF POWER OUTPUT OF A MICRO-HYDRO POWER STATION USING FUZZY LOGIC ALGORITHM

223

Optimization of power system controls within a simulation software package

224

Optimization of power train and control strategy of hybrid electric vehicles

225

Optimization of preconcentration and isolation for the determination of 15 phenols by supercritical-fluid extraction and gas chromatography with metallomesogenic stationary phase Original Research Article

226

Optimization of preconcentration procedure using magnetic nanoparticles for the determination of manganese in cereal samples

227

Optimization of preconcentration procedure using magnetic nanoparticles for the determination of manganese in cereal samples

228

Optimization of prediction methods for patents and trademarks in Spain through the use of exogenous variables Original Research Article

229

Optimization of Preform Shapes by RSM and FEM to Improve Deformation Homogeneity in Aerospace Forgings

230

Optimization of pre-industrial solar photocatalytic mineralization of commercial pesticides: Application to pesticide container recycling

231

Optimization of preparation conditions for activated carbons from coconut husk using response surface methodology

232

Optimization of preparation conditions for activated carbons from date stones using response surface methodology

233

Optimization of preparation conditions for polydimethylsiloxane (PDMS)/ceramic composite pervaporation membranes using response surface methodology

234

Optimization of preparation conditions of activated carbon from agriculture waste utilizing factorial design

235

Optimization of preparation conditions of poly(vinylidene fluoride)/graphene oxide microfiltration membranes by the Taguchi experimental design Original Research Article

236

Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst

237

Optimization of preparation of chitosan-coated iron oxide nanoparticles for biomedical applications by chemometrics approaches

238

Optimization of preparation of matrix pellets containing ethylcellulose

239

Optimization of Preparation Techniques for Poly(Lactic Acid-Co-Glycolic Acid) Nanoparticles

240

Optimization of preparative chromatographic separation of multiple rare earth elements

241

Optimization of Pressure Swing Adsorption and Fractionated Vacuum Pressure Swing Adsorption Processes for CO2 Capture

242

Optimization of pressure-induced germination of Bacillus sporothermodurans spores in water and milk Original Research Article

243

Optimization of pressurized liquid extraction (PLE) for rapid determination of mineral oil saturated (MOSH) and aromatic hydrocarbons (MOAH) in cardboard and paper intended for food contact

244

Optimization of pressurized liquid extraction (PLE) of dioxin-furans and dioxin-like PCBs from environmental samples

245

Optimization of pressurized liquid extraction and purification conditions for gas chromatography–mass spectrometry determination of UV filters in sludge

246

Optimization of pressurized liquid extraction of inositols from pine nuts (Pinus pinea L.)

247

Optimization of pressurized liquid extraction of Piper gaudichaudianum Kunth leaves

248

Optimization of pressurized liquid extraction using a multivariate chemometric approach and comparison of solid-phase extraction cleanup steps for the determination of polycyclic aromatic hydrocarbons in mosses

249

Optimization of pressurized liquid extraction using a multivariate chemometric approach for the determination of anticancer drugs in sludge by ultra high performance liquid chromatography–tandem mass spectrometry

250

OPTIMIZATION OF PRETREATMENT CONDITIONS OF CARROTS TO MAXIMIZE JUICE RECOVERY BY RESPONSE SURFACE METHODOLOGY

251

Optimization of pretreatment conditions using full factorial design and enzymatic convertibility of shea tree sawdust

252

Optimization of pretreatment reaction for methyl ester production from chicken fat

253

Optimization of pretreatments for the hydrolysis of oil palm empty fruit bunch fiber (EFBF) using enzyme mixtures

254

Optimization of preventive maintenance and spare part provision for machine tools based on variable operational conditions

255

Optimization of primal and dual network models of distribution Original Research Article

256

Optimization of printed circuit board manufacturing: Integrated modeling and algorithms

257

Optimization of process conditions for enzymatic modification of alternan using dextranase from Chaetomium erraticum

258

Optimization of process conditions for the transfer molding of electronic packages

259

Optimization of process conditions in casting aluminum matrix composites via interconnection of artificial neurons and progressive solutions

260

Optimization of process conditions with attention to the sludge reduction and stable immobilization in a novel Tubificidae-reactor

261

Optimization of process conditions, characterization and mechanical properties of silane crosslinked high-density polyethylene

262

Optimization of process factors for solid-state bioconversion of domestic wastewater sludge

263

Optimization of process for the production of bio-oil from eucalyptus wood

264

Optimization of process for the production of fungal pectinases from deseeded sunflower head in submerged and solid-state conditions

265

Optimization of process integration in a Kraft pulp and paper mill – Evaporation train and CHP system

266

Optimization of process parameter involved in the effectiveness evaluation of continuous line manufacturing system (CLMS)

267

Optimization of process parameter of residual stresses for hard turned surfaces

268

Optimization of process parameters and catalyst compositions in carbon dioxide oxidative coupling of methane over CaO–MnO/CeO2 catalyst using response surface methodology

269

Optimization of Process Parameters by Response Surface Methodology for Methylene Blue Removal Using Cellulose Dusts

270

Optimization of Process Parameters During Drilling of Glass-Fiber Polyester Reinforced Composites Using DOE and ANOVA

271

Optimization of Process Parameters for Alkaline Protease Production by Bacillus licheniformis N-2 and Kinetics Studies in Batch Fermentation

272

Optimization of Process Parameters for Alkaline-Catalysed Transesterification of Palm Oil Using Response Surface Methodology

273

Optimization of Process Parameters for Catalytic Pyrolysis of Waste Tyre using Reactivated Fluid Catalytic Cracking Catalyst

274

Optimization of process parameters for deposition of Stellite on X45CrSi93 steel by plasma transferred arc technique

275

Optimization of Process Parameters for Enhanced Up-gradation of Qilla Saifullah Copper ore through Froth Floatation Technique

276

Optimization of process parameters for friction Stir welding of dissimilar Aluminum alloys (AA2024 -T6 and AA6351-T6) by using Taguchi method

277

Optimization of process parameters for high-efficiency polymer photovoltaic devices based on P3HT:PCBM system

278

Optimization of process parameters for lipase-catalyzed synthesis of esteramines-based esterquats using wavelet neural network (WNN) in 2-liter bioreactor

279

Optimization of process parameters for microwave drying of garlic cloves Original Research Article

280

Optimization of process parameters for milling of enzymatically pretreated Basmati rice Original Research Article

281

Optimization of process parameters for preparing WO3/polyacrylonitrile nanocomposites and the associated dispersion mechanism

282

Optimization of process parameters for supercritical carbon dioxide extraction of Passiflora seed oil by response surface methodology

283

Optimization of process parameters for the production of tyrosine phenol lyase by Citrobacter freundii MTCC 2424

284

Optimization of process parameters for the synthesis of silica gel-WC nanocomposite by design of experiment

285

Optimization of process parameters in a large-area hot-wire CVD reactor for the deposition of amorphous silicon (a-Si:H) for solar cell application with highly uniform material quality

286

Optimization of process parameters in flash pyrolysis of waste tyres to liquid and gaseous fuel in a fluidized bed reactor

287

Optimization of Process Parameters of Alkali Based Clay Catalyst for the Production of Biodiesel

288

Optimization of process parameters of boro-carburized low carbon steel for tensile strength by Taquchi method with grey relational analysis

289

Optimization of Process Parameters of Electron Beam Welded Fe49Co2V Alloys

290

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

291

Optimization of process parameters of the Pholiota squarrosa extracellular polysaccharide by Box–Behnken statistical design

292

Optimization of process parameters of the Pholiota squarrosa extracellular polysaccharide by Box–Behnken statistical design

293

Optimization of Process Parameters on Hydrothermal Liquefaction of Sambucus Ebulus for Bio-oil Production

294

Optimization of process parameters using a Response Surface Method for minimizing power consumption in the milling of carbon steel

295

Optimization of process parameters using D-optimal design for synthesis of ZnO nanoparticles via sol–gel technique

296

Optimization of process parameters using weighted convex loss functions

297

Optimization of process performance in a granule-based anaerobic ammonium oxidation (anammox) upflow anaerobic sludge blanket (UASB) reactor

298

Optimization of process variables by response surface methodology for methylene blue dye removal using Spruce sawdust/MgO nano-biocomposite

299

Optimization of process variables for enhanced lactic acid production utilizing paneer whey as substrate in SMF

300

Optimization of process variables for essential oil components from Satureja hortensis by supercritical fluid extraction using Box-Behnken experimental design

301

Optimization of process variables for the preparation of expanded finger millet using response surface methodology Original Research Article

302

Optimization of processing conditions for the fractionation of triticale straw using pressurized low polarity water

303

Optimization of processing conditions for the pretreatment of wheat straw using aqueous ionic liquid

304

Optimization of processing conditions for the sterilization of retorted short-rib patties using the response surface methodology

305

Optimization of processing parameters based on high temperature flow behavior and microstructural evolution of a nitrogen enhanced 316L(N) stainless steel

306

Optimization of processing parameters for cloudy ginkgo (Ginkgo biloba Linn.) juice Original Research Article

307

Optimization of processing parameters for extraction of total, insoluble and soluble dietary fibers of defatted rice bran

308

Optimization of Processing Parameters for Milling of Green Gram (Phaseolus aureus)

309

Optimization of processing parameters for preparation of LaNiO3 thin films from the citrate precursors

310

Optimization of Processing Parameters for Production of Pectinolytic Enzymes from Fermented Pineapple Residue of Mixed Aspergillus species

311

Optimization of processing parameters for the Al + 10% B4C system obtained by mechanical alloying

312

Optimization of processing parameters for the synthesis of tungsten carbide (WC) nanoparticles through solvo thermal route

313

Optimization of processing parameters of a ball mill refiner for chocolate Original Research Article

314

Optimization of processing parameters of horse mackerel (Trachurus japonicus) dried in a heat pump dehumidifier using response surface methodology Original Research Article

315

Optimization of Processing Parameters of Soybean Seeds Dried in a Constant-bed Dryer Using Response Surface Methodology

316

Optimization of processing parameters of the chemical vapor deposition process for synthesizing high-quality single-walled carbon nanotube fluff and roving

317

Optimization of processing parameters on the controlled growth of ZnO nanorod arrays for the performance improvement of solid-state dye-sensitized solar cells

318

Optimization of processing technology of Rhizoma Pinelliae Praeparatum and its anti-tumor effect

319

Optimization of Processing Time, Temperature, and Stirring Rate to Synthesize the Ag Nanoparticles Using Oregano Extract

320

Optimization of Processing Variables for Pistachio Paste Production

321

Optimization of processing variables in wood–rubber composite panel manufacturing technology

322

Optimization of producer gas fired premixed burner

323

Optimization of product performance of a paint formulation using a mixture experiment

324

Optimization of production allocation and transportation of customer orders for a leading forest products company

325

Optimization of production and antioxidant activity of fucoxanthin from marine haptophyte algae, Isochrysis galbana

326

Optimization of production conditions for activated carbons from Tamarind wood by zinc chloride using response surface methodology

327

Optimization of production conditions for mushroom polysaccharides with high yield and antitumor activity

328

optimization of production conditions of mahyaveh, a traditional iranian fish sauce, with low microbial load

329

Optimization of production of enzymatic protein hydrolysate-based flavor from sea grape (Caulerpa racemosa)

330

Optimization of production schedules in the steel production system

331

Optimization of production yield and functional properties of pectin extracted from sugar beet pulp

332

Optimization of production yields, radionuclidic purity and hotcell shielding of SPECT and PET radionuclides produced by proton irradiation in variable energy 30 MeV cyclotrons—Part 67Ga

333

Optimization of Profiled Diffuser Barrier Using the New Multi-

334

Optimization of propane pre-cooled mixed refrigerant LNG plant

335

Optimization of properties and operating parameters of a passive DMFC mini-stack at ambient temperature

336

Optimization of properties of fly ash aggregates for high-strength lightweight concrete production

337

Optimization of Proportions of Central Courtyard based on Comfort Standards in the Traditional Qajar Period Houses in Boushehr

338

Optimization of proppant size for frac pack completion using a new equipment

339

Optimization of prostate cancer radiotherapy using of a spacer gel, volumetric modulated arc therapy and a single biological organ at risk objective

340

Optimization of prostate carcinoma staging: Comparison of imaging and clinical methods

341

Optimization of prostate MRI acquisition and post-processing protocol: a pictorial review with access to acquisition protocols

342

Optimization of prot and customer satisfaction in combinatorial production and purchase model by genetic algorithm

343

Optimization of protease activity of alkaliphilic bacteria isolated from an alkaline lake in India

344

Optimization of Protease Production by Psychrotrophic Rheinheimera sp. with Response Surface Methodology

345

Optimization of protein conjugation using an aldehyde derivatized bifunctional chelating agent

346

Optimization of Protein Content in Earthworm-based Fish Feed Formulation for Catfish (Clarius gariepinus)

347

Optimization of protein encapsulation in PLGA nanoparticles

348

Optimization of Protein Extraction from Fermented and Non Fermented Perah Seed by using Response Surface Methodology

349

Optimization of protein force-field parameters with the Protein Data Bank

350

Optimization of protein identification from digests as analyzed by capillary isoelectric focusing-mass spectrometry

351

Optimization of protein in supplementary feeds for pond raised cyprinids

352

OPTIMIZATION OF PROTEIN ISOLATION FROM DATE PALM PLANTS AND ITS UTILIZATION IN DIFFERENTIAL PROTEOMICS ASSOCIATED WITH RED PALM WEEVIL INFESTATION

353

Optimization of protein precipitation based upon effectiveness of protein removal and ionization effect in liquid chromatography–tandem mass spectrometry

354

Optimization of Protein Production in Mammalian Cells with a Coexpressed Fluorescent Marker

355

Optimization of protein recovery by foam separation using response surface methodology Original Research Article

356

OPTIMIZATION OF PROTOCOLS FOR TEMPERING 20G2R AND 38KhGNM STEELS BY INDUCTION HEATING

357

Optimization of protocrystalline silicon p-type layers for amorphous silicon n–i–p solar cells

358

Optimization of proton exchange membranes and the humidifying conditions to improve cell performance for polymer electrolyte fuel cells

359

Optimization of PSF Membrane Transport Properties with the Use of Porogenic Additive

360

Optimization of PtIr electrocatalyst for PEM URFC

361

Optimization of PTS2·EGFP Expression in CHO and Vero Cells

362

Optimization of pullulan production from hydrolysed potato starch waste by response surface methodology

363

Optimization of pullulanase production in Escherichia coli by regulation of process conditions and supplement with natural osmolytes

364

Optimization of pulping conditions of abaca. An alternative raw material for producing cellulose pulp

365

Optimization of pulse sequences in ultrafast magnetic resonance imaging for the diagnosis of acute abdominal pain caused by gastrointestinal disease

366

Optimization of pulsed laser atom probe (PLAP) for the analysis of nanocomposite Ti–Si–N films

367

Optimization of pulsed laser atom probe (PLAP) for the analysis of nanocomposite Ti–Si–N films

368

Optimization of pulsed microwave heating Original Research Article

369

Optimization of pulsed TIG welding process parameters on mechanical properties of AA 5456 Aluminum alloy weldments

370

Optimization of pumping rate and recharge through numerical modeling with special reference to small coral island aquifer

371

Optimization of pump-treat-inject (PTI) design for the remediation of a contaminated aquifer: multi-stage design with chance constraints

372

Optimization of purge cycle for dead-ended anode fuel cell operation

373

Optimization of purine based PDE1/PDE5 inhibitors to a potent and selective PDE5 inhibitor for the treatment of male ED

374

Optimization of PVA clay nanocomposite for ultra-barrier multilayer encapsulation of organic solar cells

375

Optimization of PWR fuel assembly radial enrichment and burnable poison location based on adaptive simulated annealing

376

Optimization of pyrimidinyl- and triazinyl-amines as non-nucleoside inhibitors of HIV-1 reverse transcriptase

377

Optimization of pyrolysis conditions and adsorption properties of bone char for fluoride removal from water

378

Optimization of pyrolysis conditions and adsorption properties of bone char for fluoride removal from water

379

Optimization of pyrolysis conditions of polyurethane for recycling of solid products

380

Optimization of pyrolysis conditions of polyurethane for recycling of solid products

381

Optimization of pyrolysis conditions of scrap tires under inert gas atmosphere

382

Optimization of Pyrolysis Temperature and Particle Size on the Phenols and Hemicellulose Fast Pyrolysis Products in a Tandem Micro-Pyrolyzer

383

Optimization of pyrrolidinone based HIV protease inhibitors

384

Optimization of QCD perturbation theory: Results for image at fourth order Original Research Article

385

Optimization of Q-factor of AFM cantilevers using genetic algorithms

386

Optimization of Q-factor of AFM cantilevers using genetic algorithms

387

Optimization of quadrupolar chromophores for molecular two-photon absorption

388

Optimization of Quantitative Analysis of Cetirizine in Bulk Drug, Dosage Formulations and Human Serum Using Spectrophotometry

389

Optimization of quantization table based on visual characteristics in DCT image coding

390

Optimization of Quantum Cellular Automata Circuits by Genetic Algorithm

391

Optimization of quantum-well infrared detectors integrated with light-emitting diodes

392

Optimization of Queries with User-Defined Predicates

393

Optimization of queuing system via stochastic control

394

Optimization of R&D project portfolios under endogenous uncertainty

395

Optimization of Radial Basis Function neural network employed for prediction of surface roughness in hard turning process using Taguchi’s orthogonal arrays

396

Optimization of radial systems with biomass fueled gas engine from a metaheuristic and probabilistic point of view

397

Optimization of radiation characteristic of time modulated circular geometry using DEWM

398

Optimization of Radiation Dose in Cranial Computed Tomography among Adults: Assessment of Radiation Dose against Image Quality

399

Optimization of Radiation Modes in Asymmetric Planar Slab Optical Waveguides

400

Optimization of radio resource management schemes in UMTS using pricing

401

Optimization of Radiological Protection in Pediatric Patients Undergoing Common Conventional Radiological Procedures: Effectiveness of Increasing the Film to Focus Distance (FFD)

402

Optimization of Radiolytic Degradation of Poly(vinyl alcohol)

403

Optimization of radiosurgery treatmeht planning via mixed integer programming

404

OPTIMIZATION OF RADON MEASUREMENTS WITH ACTIVE CHARCOAL

405

Optimization of railway operations using neural networks

406

Optimization of raisin sorting machine using genetic algorithm

407

Optimization of random diffraction gratings in thin-film solar cells using genetic algorithms

408

Optimization of random number generators: efficient search for high-quality LCGs

409

Optimization of Random Phase Updating Technique for Effective Reduction in PAPR, Using Discrete Cosine Transform

410

Optimization of rapid prototyping parameters for production of flexible ABS object

411

Optimization of Rate Coefficients for Simplified Reaction Mechanisms with Genetic Algorithms

412

Optimization of ratio of active masses in VRLA battery

413

Optimization of rational-powered membership functions using extended Kalman filter

414

Optimization of raw material mixtures in the production of biodiesel from vegetable and used frying oils regarding quality requirements in terms of cold flow properties

415

Optimization of RB5 Effluent Decolorization Efficiency Using KCT Composites - Statistical Approach with ANN Modeling

416

OPTIMIZATION OF RC FRAMES BY AN IMPROVED ARTIFICIAL BEE COLONY ALGORITHM

417

Optimization of RC structure performance in marine environment

418

Optimization of Re solvent extraction from molybdenite roasting dust leaching solution and the performance evaluation of extraction in a multi-stage mixer–settler

419

Optimization of reaction calorimetry with supercritical fluids: A complete term-by-term analysis of the heat flow equation

420

Optimization of reaction condition for solid-state synthesis of LiFePO4-C composite cathodes

421

Optimization of reaction conditions and effect of catalyst type on product distribution in Cyclooctene oxidation

422

Optimization of reaction conditions by RSM and structure characterization of sulfated locust bean gum

423

Optimization of Reaction Conditions for Carboxymethylated Sago Starch

424

Optimization of reaction conditions for grafting of α-cellulose isolated from Lantana camara with acrylamide

425

Optimization of reaction conditions for preparing carboxymethyl cellulose from sago waste

426

Optimization of reaction conditions in production of cycloisomaltooligosaccharides using enzyme immobilized in multilayers onto pore surface of porous hollow-fiber membranes

427

Optimization of reaction conditions in selective oxidation of styrene over fine crystallite spinel-type CaFe2O4 complex oxide catalyst

428

Optimization of reaction parameters for 5,5’-methylenebis (salicylaldehyde) synthesis using sonochemical approach

429

Optimization of Reactive Blue 19 Biodegradation by Phanerochaetechrysosporium

430

OPTIMIZATION OF REACTIVE BLUE 19 DECOLORIZATION BY GANODERMA SP. USING RESPONSE SURFACE METHODOLOGY

431

Optimization of reactive extraction of castor seed to produce biodiesel using response surface methodology

432

Optimization of reactive simulated moving bed and Varicol systems for hydrolysis of methyl acetate

433

Optimization of Reactor Temperature and Catalyst Weight for Plastic Cracking to Fuels Using Response Surface Methodology

434

Optimization of reactor volumes for gold cyanidation

435

Optimization of Real Time Application on Mixed Architecture Using AAA Methodology Extension.

436

Optimization of Real Time PCR for Precise Measurement of HER2 Overexpression in Breast Cancer Specimens

437

Optimization of Real Time PCR for Precise Measurement of HER2 Overexpression in Breast Cancer Specimens

438

Optimization of real-time multiserver system with two different channels and shortage of maintenance facilities Original Research Article

439

Optimization of Real-Time Quantitative PCR assay for detection of Echinococcus granulosus in fecal samples

440

Optimization of recirculating laminar air flow in operating room air conditioning systems

441

Optimization of Recombinant Expression of Synthetic Bacterial Phytase in Pichia pastoris Using Response Surface Methodology

442

Optimization of Recombinant Expression of Synthetic Bacterial Phytase in Pichia pastoris Using Response Surface Methodology

443

Optimization of Recombinant Glycoprotein D (gD) based Indirect ELISA for Detection of Antibodies against Bovine Herpesvirus-1

444

Optimization of recombinant human erythropoietin therapy after allogeneic hematopoietic stem cell transplantation

445

Optimization of recombinant hyperthermophilic esterase production from agricultural waste using response surface methodology

446

Optimization of Recombinant Novel Esterase Expression from Extremophiles

447

Optimization of recompression S-CO2 power cycle with reheating

448

Optimization of recreational site selection using multi criteria evaluation and functional relationship diagram (Case study: Miankaleh wildlife sanctuary)

449

Optimization of recreational site selection using multi criteria evaluation and functional relationship diagram (Case study: Miankaleh wildlife sanctuary)

450

Optimization of Redesign Process in Production Systems

451

Optimization of reduced calorie tropical mixed fruits jam

452

Optimization of Reforming Catalyst Distribution in a Cross-Flow Molten Carbonate Fuel Cell with Direct Internal Reforming

453

Optimization of refractive index sampling for multichannel fiber Bragg gratings

454

Optimization of refrigerated shields using multilayer thermal insulation: Cryostats design – analytical solution Original Research Article

455

Optimization of refrigeration system with gas-injected scroll compressor

456

OPTIMIZATION OF REGENERATION PROTOCOLS FOR WHEAT UNDER DROUGHT AND SALT STRESS

457

Optimization of regional hazardous waste management systems: an improved formulation

458

Optimization of reheat pressures in thermal power plants

459

Optimization of reinforced concrete columns according to different environmental impact assessment parameters

460

Optimization of reinforcement content and sliding distance for AlSi7Mg/SiCp composites using response surface methodology

461

Optimization of reinforcement turn-up effect on tyre durability and operating characteristics for racing tyre design

462

Optimization of relativistic mean field model for finite nuclei to neutron star matter

463

Optimization of release locations for small self-stress large stiffness flexure mechanisms

464

Optimization of removal conditions of copper ions from aqueous solutions by Trametes versicolor

465

Optimization of removal of lead from bearing-lead anode slime

466

Optimization of renormalization group flow Original Research Article

467

Optimization of replacement times using imperfect monitoring information

468

Optimization of replacing pork back fat with grape seed oil and rice bran fiber for reduced-fat meat emulsion systems

469

Optimization of Reservoir Management and Operation with Hedging Rules

470

Optimization of Reservoir Operation for Real-Time Flood Control with Emphasis on Forecast Uncertainty: A case study of Dez Reservoir

471

Optimization of Reservoir Operation using a Bioinspired Metaheuristic Based on the COVID-19 Propagation Model

472

Optimization of Residential Spatial Configuration based on Energy Performance, Daylight Brightness, and Thermal Comfort through Pareto Evolutionary Algorithm, Case Study: Mashhad City Climate

473

Optimization of residual welding stresses in austenitic steel piping: prooftesting and numerical simulation of welding and postwelding processes

474

Optimization of residual welding stresses in austenitic steel piping: prooftesting and numerical simulation of welding and postwelding processes Original Research Article

475

OPTIMIZATION OF RESILIENT WHEELS FOR ROLLING NOISE CONTROL

476

Optimization of resistance spot welding on the assembly of refractory alloy 50Mo–50Re thin sheet

477

OPTIMIZATION OF RESISTANCE SPOT WELDING PROCESS USING TAGUCHI METHOD AND A NEURAL NETWORK

478

Optimization of Results for Cracked Teeth Using CAD-CAM System: A Case Series

479

Optimization of retractable structures utilizing bistable compliant mechanism

480

Optimization of retrofitting distortion-induced fatigue cracking of steel bridges using monitored data under uncertainty

481

Optimization of retro-thiorphan for inhibition of endothelin converting enzyme

482

Optimization of retroviral-mediated gene transfer to human NOD/SCID mouse repopulating cord blood cells through a systematic analysis of protocol variables

483

Optimization of reversed-phase microcapillary liquid chromatography for quantitative proteomics

484

Optimization of rewards in single machine scheduling in the rewards-driven systems

485

Optimization of RF power absorption by optimization techniques using the lower hybrid current drive of FTU

486

Optimization of rheological properties of photopolymerizable alumina suspensions for ceramic microstereolithography

487

Optimization of rib-roughened annular gas-coolant channels Original Research Article

488

Optimization of ricotta cheese whey (RCW) fermentation by response surface methodology

489

Optimization of ring-contraction of the meso enedione epoxide for chiral building block synthesis

490

Optimization of RNA Extraction from Rat Pancreatic Tissue

491

Optimization of RNA extraction protocol for Mentha piperita

492

Optimization of RO desalination systems powered by renewable energies Original Research Article

493

Optimization of RO desalination systems powered by renewable energies. Part I: Wind energy Original Research Article

494

Optimization of roasting conditions for high-quality Arabica coffee

495

Optimization of roll cutting in clothing industry

496

Optimization of Roll Shifting Strategy of Alternately Rolling in Hot Strip Mill Original Research Article

497

Optimization of rolling temperature for ZK61 alloy sheets via microstructure uniformity analysis

498

Optimization of rootkit revealing system resources – A game theoretic approach

499

Optimization of rotor shaft shrink fit method for motor using “Robust design”

500

Optimization of roughness, reflectance and photoluminescence for acid textured mc-Si solar cells etched at different HF/HNO3 concentrations

501

Optimization of Route Planning using Simulated Ant Agent System

502

Optimization of RT–PCR for the Detection of Bean leaf roll virus in Plant Hosts and Insect Vectors

503

Optimization of RT-qPCR for Detection of Aichi Virus in Sewage and River Water Samples in Karaj, Iran

504

Optimization of Rubber Compound Design Process Using Artificial Neural Network and Genetic Algorithm

505

Optimization of RuxSey electrocatalyst loading for oxygen reduction in a PEMFC

506

Optimization of S/B in the detection of nuclear fission signatures via different accelerator pulsing modes

507

Optimization of S/B in the detection of nuclear fission signatures via different accelerator pulsing modes

508

Optimization of saccharide fractionation using nanofiltration/ultrafiltration Original Research Article

509

Optimization of Saccharomyces cerevisiae immobilization in bacterial cellulose by ‘adsorption- incubation’ method

510

Optimization of safety audit planning: a case study of process plant in India

511

Optimization of safety equipment outages improves safety

512

Optimization of safety equipment outages improves safety

513

Optimization of SAGD and solvent additive SAGD applications: Comparative analysis of optimization techniques with improved algorithm configuration

514

Optimization of salt, olive oil and pectin level for low-fat frankfurters produced by replacing pork backfat with olive oil

515

Optimization of sample geometries in low-level gamma spectroscopy

516

Optimization of sample geometries in low-level gamma spectroscopy

517

Optimization of sample height in cylindrical geometry for gamma spectrometry measurements

518

Optimization of sample height in cylindrical geometry for gamma spectrometry measurements

519

Optimization of sample number for Weibull function of brittle materials strength

520

Optimization of sample patterns for universal kriging of environmental variables

521

Optimization of Sample Preparation for 1-Hydroxypyrene as a Major Biomarker of Exposure to PAHs Prior to HPLC

522

Optimization of Sample Preparation for Peptide Sequencing by MALDI-TOF Photofragment Mass Spectrometry

523

Optimization of Sample Preparation Procedure for Evaluation of Occupational and Environmental Exposure to Nickel.

524

Optimization of sampling and counting times for gamma-ray spectrometric measurements of short-lived gamma-ray emitters in aqueous samples

525

Optimization of sampling frequency for river water quality assessment according to Italian implementation of the EU Water Framework Directive

526

Optimization of sampling schemes for vegetation mapping using fuzzy classification

527

Optimization of SAW sensors with a structure ZnO–SiO2–Si to detect volatile organic compounds

528

Optimization of sawtooth surface-relief gratings: effects of substrate refractive index and polarization

529

Optimization of scaffold design for bone tissue engineering: A computational and experimental study

530

Optimization of scale and parametrization for terrain segmentation: An application to soil-landscape modeling

531

Optimization of Scan and Reconstruction Parameters for Renal Artery CT Angiography with Iterative Reconstruction at Low kVp Compared with Filtered Back Projection at 120 kVp Acquisition

532

Optimization of scannable latches for low energy

533

Optimization of scanning transmission X-ray microscopy for the identification and quantitation of reinforcing particles in polyurethanes

534

Optimization of scanning transmission X-ray microscopy for the identification and quantitation of reinforcing particles in polyurethanes

535

Optimization of scantiming in abdominal breathhold contrast-enhanced MRA: an empirical guideline

536

Optimization of SC–CO2 extraction of zerumbone from Zingiber zerumbet (L) Smith

537

Optimization of Scheduling Information in a Network-Based Standard IEEE802. 17 and Measurement for Video Transmission

538

Optimization of seawater evaporation plants Original Research Article

539

Optimization of seawater RO systems design

540

Optimization of seawater RO systems design Original Research Article

541

Optimization of secondary ion mass spectrometry for quantitative trace analysis

542

Optimization of secondary suspension of piecewise linear vibration isolation systems

543

Optimization of secondary suspension of piecewise linear vibration isolation systems

544

Optimization of secondary suspension of piecewise linear vibration isolation systems

545

Optimization of second-harmonic generation microscopy

546

Optimization of secretory expression of recombinant hGM-CSF in high cell density cultivation of recombinant Escherichia coli using Taguchi statistical method

547

Optimization of sector geometry of a compact cyclotron by random search and matrixmethods

548

Optimization of sector geometry of a compact cyclotron by random search and matrixmethods

549

Optimization of sediment rating curve coefficients using evolutionary algorithms and unsupervised artificial neural network

550

Optimization of segmented constrained layer damping with mathematical programming using strain energy analysis and modal data

551

Optimization of seismic response of steel structure using negative stiffness damper

552

Optimization of selenium determination in plant samples by hydride generation and axial view inductively coupled plasma atomic emission spectrometry Original Research Article

553

Optimization of selenium status by a single intraperitoneal injection of Se in Se-deficient rat: Possible application to burned patient treatment

554

Optimization of selenylation conditions for Chinese angelica polysaccharide based on immune-enhancing activity

555

Optimization of selenylation conditions for lycium barbarum polysaccharide based on antioxidant activity

556

Optimization of self-compacting filling grout mixtures for repair purposes

557

Optimization of self-organizing polynomial neural networks

558

Optimization of Semi-Active Control of Seismically Excited Buildings Using Genetic Algorithms

559

Optimization of semi-quantitative RT PCR analysis for CPT I gene expression in Rainbow trout (Oncorhynchus mykiss)

560

Optimization of Semiregenerative Catalytic Naphtha Reforming Unit to Enhance Octane Number and Reformate Yield

561

Optimization of Sensitivity and Stability of Gold/Silver bi-Layer Thin Films Used in Surface Plasmon Resonance Chips

562

Optimization of sensitivity encoding with arbitrary k-space trajectories

563

Optimization of sensitivity induced by surface conductivity and sorbed mass in surface acoustic wave gas sensors

564

Optimization of sensor array and detection of stored duration of wheat by electronic nose Original Research Article

565

Optimization of Sensor Based on Molecularly Imprinted Polymeric Nanoparticles for Detection of Dipicolinic Acid as a Biomarker in Bacterial Spores

566

Optimization of separate hydrogen and methane production from cassava wastewater using two-stage upflow anaerobic sludge blanket reactor (UASB) system under thermophilic operation

567

Optimization of separation and detection conditions for comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry analysis of polychlorinated dibenzo-p-dioxins and dibenzofurans

568

Optimization of separation and detection conditions for the multiresidue analysis of pesticides in grapes by comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry

569

Optimization of separation and detection of 6-aminoquinolyl derivatives of amino acids by using reversed-phase liquid chromatography with on line UV, fluorescence and electrochemical detection Original Research Article

570

Optimization of separation and migration behavior of cephalosporins in capillary zone electrophoresis

571

Optimization of separation and migration behavior of chloropyridines in micellar electrokinetic chromatography

572

Optimization of separation in two-dimensional high-performance liquid chromatography by adjusting phase system selectivity and using programmed elution techniques

573

Optimization of series–parallel multi-state systems under maintenance policies

574

Optimization of series–parallel multi-state systems under maintenance policies

575

Optimization of serotonin imprinted polymers and recognition study from platelet rich plasma

576

Optimization of SERS scattering by Ag-NPs-coated filter paper for quantification of nicotinamide in a cosmetic formulation

577

Optimization of SERS-active substrates for near-field Raman spectroscopy

578

Optimization of Service Process in Emergency Depart- ment Using Discrete Event Simulation and Machine Learning Algorithm

579

Optimization of serviceability load combinations for structural steel beam design

580

Optimization of Set-up Conditions for Stability of The Centerless Grinding Process

581

Optimization of Set-Valued Functions

582

Optimization of sewage sludge conditioning and pressure dewatering by statistical modelling

583

Optimization of shale gas field development using direct search techniques and reduced-physics models

584

Optimization of shape and functional structure of buildings as well as heat source utilisation example

585

Optimization of shape and functional structure of buildings as well as heat source utilisation. Partial problems solution

586

Optimization of shape and functional structure of buildings as well as heat source utilization. Basic theory

587

Optimization of sheet metal forming processes by the use of numerical simulations

588

Optimization of shell-and-tube heat exchangers conforming to TEMA standards with designs motivated by constructal theory

589

Optimization of shoot apex based cotton regeneration system

590

Optimization of short micro pin fins in minichannels

591

Optimization of Short Stroke Control Preset for Automatic Width Control of Hot Rolling Mill Original Research Article

592

Optimization of short-haul aircraft schedule recovery problems using a hybrid multiobjective genetic algorithm

593

Optimization of short-term animal behaviour and the currency of time

594

Optimization of short-time gasoline blending scheduling problem with a DNA based hybrid genetic algorithm

595

Optimization of shot peening parameters using Taguchi technique

596

Optimization of Si interface control layer thickness for high-k GaAs metal–insulator–semiconductor structures

597

Optimization of SiC particle distribution during compocasting of A356SiCp composites using D-optimal experiment design

598

OPTIMIZATION OF SIDE LOBE LEVEL AND FIXING QUASI-NULLS IN BOTH OF THE SUM AND DIFFERENCE PATTERNS BY USING CONTINUOUS ANT COLONY OPTIMIZATION (ACO) METHOD

599

Optimization of signal denoising in discrete wavelet transform

600

Optimization of significant factors on the microbial decolorization of azo dye in an aqueous medium by Design of Experiments

601

Optimization of silica content in alumina–silica support for NiMo sulfide to achieve deep desulfurization of gas oil Original Research Article

602

Optimization of silica surface with nanosize holes for immobilization of biomolecules and analysis of their interactions Original Research Article

603

Optimization of silica-based media for antibody purification by protein A affinity chromatography

604

Optimization of silicon microstrip detector design for CLEO III

605

Optimization of silicon microstrip detector design for CLEO III

606

Optimization of silylation using N-methyl-N-(trimethylsilyl)-trifluoroacetamide, N,O-bis-(trimethylsilyl)-trifluoroacetamide and N-(tert-butyldimethylsilyl)-N-methyltrifluoroacetamide for the determination of the estrogens estrone and 17α-ethinylestradiol

607

OPTIMIZATION OF SIMPLIFIED MODELS MESHED WITH FINITE TRIANGULAR PLATE ELEMENTS

608

Optimization of SIMS analyses performed in the MCsx+ mode by using an in situ deposition of neutral Cs

609

Optimization of SIMS analyses performed in the MCSxþ mode by using an in situ deposition of CS

610

Optimization of SIMS analysis conditions for Na, S, P and N in Cu films

611

Optimization of simulated moving bed and column chromatography for a plasmid DNA purification step and for a chiral separation

612

Optimization of simulated moving bed and Varicol processes

613

Optimization of simulated moving bed chromatography with fractionation and feedback: Part I. Fractionation of one outlet

614

Optimization of simulated moving bed chromatography with fractionation and feedback: Part II. Fractionation of both outlets

615

Optimization of simulated moving bed plants with low efficient stationary phases: separation of fructose and glucose

616

Optimization of Simulated Ripe Olive Darkening In Presence of Manganese

617

Optimization of simulated systems: OptQuest and alternatives

618

Optimization of simultaneous thermal analysis for fast screening of polycondensation catalysts

619

Optimization of simultaneous thermophilic fermentative hydrogen production and COD reduction from palm oil mill effluent by Thermoanaerobacterium-rich sludge

620

Optimization of SiN thin film for high index contrast planar silica waveguides

621

Optimization of Single Cell Protein Production by Aspergillus niger Using Taguchi Approach

622

Optimization of single mode fibre sensors to detect organic vapours

623

Optimization of single outsourcer–single subcontractor outsourcing relationship under reliability and maintenance constraints

624

Optimization of single SOFC structural design for maximum power

625

Optimization of single-gate carbon-nanotube field-effect transistors

626

Optimization of Single-Phase Induction Motors—Part I: Maximum Energy Efficiency Control

627

Optimization of Single-Phase Induction Motors—Part II: Magnetic and Torque Performance Under Optimal Control

628

Optimization of sintering conditions on the Bi-2223 formation and grain size

629

Optimization of sintering on the structural, electrical and dielectric properties of SnO2 coated CuFe2O4 nanoparticles

630

Optimization of site specific adsorption of oleylamine capped CuO nanoparticles on MWCNTs for electrochemical determination of guanosine

631

Optimization of Six Bar Knee Linkage for Stability of Knee Prosthesis

632

OPTIMIZATION OF SKELETAL STRUCTURAL USING ARTIFICIAL BEE COLONY ALGORITHM

633

OPTIMIZATION OF SKELETAL STRUCTURES USING A HYBRIDIZED ANT COLONY-HARMONY SEARCH- GENETIC ALGORITHM

634

OPTIMIZATION OF SKELETAL STRUCTURES USING IMPROVED GENETIC ALGORITHM BASED ON PROPOSED SAMPLING SEARCH SPACE IDEA

635

Optimization of slabs using object oriented programming

636

Optimization of slider air bearing contours using the combined genetic algorithm-subregion approach

637

Optimization of slurry flocculation and dewatering based on electrokinetic and rheological phenomena

638

Optimization of Sm0.5Sr0.5CoO3−δ–Sm0.2Ce0.8O2−δ composite cathodes fabricated by electrostatic slurry spray deposition

639

Optimization of small molecule agonists of the thrombopoietin (Tpo) receptor derived from a benzo[a]carbazole hit scaffold

640

Optimization of small-particle plasma-sprayed alumina coatings using designed experiments

641

Optimization of small-particle plasma-sprayed alumina coatings using designed experiments

642

Optimization of Small-Scale Trigeneration Systems in Terms of Levelized Total Costs and Carbon Tax Using a Matrix Modeling Approach

643

Optimization of SMES and superconducting magnets with a derivative free deterministic method Original Research Article

644

Optimization of smoothing process—the method to improve calibration in voltammetry: Part I. Simulated voltammograms

645

Optimization of SnO2 screen-printing inks for gas sensor applications

646

Optimization of soaking conditions for the production of seaweed (Kappaphycus alverazii) paste using response surface methodology

647

Optimization of sodium carbonate texturization on large-area crystalline silicon solar cells

648

Optimization of sodium dedecyl sulfate (SDS) addition coupled with adenosine triphosphate (ATP) regeneration for glutathione overproduction in high density cultivation of Candida utilis

649

Optimization of sodium loading on zeolite support for catalyzed transesterification of triolein with methanol

650

Optimization of soft magnetic properties in nanoperm type alloys

651

Optimization of software components selection for component-based software system development

652

Optimization of Soil Aquifer Treatment by Chemical Oxidation with Hydrogen Peroxide Addition

653

Optimization of soil-adjusted vegetation indices

654

Optimization of solar absorbing three-layer coatings

655

Optimization of Solar Absorption Chillers by Differential Evolution Algorithm Method

656

Optimization of Solar Absorption Cooling System Considering Hourly Analysis

657

Optimization of solar adsorption refrigeration system using experimental and statistical techniques

658

Optimization of Solar Cooling Systems with Simulation Modeling

659

Optimization of solar crop drying

660

Optimization of solar DHW system including PCM media

661

Optimization of Solar Disinfection Considering Log Reduction Values (LRV) for Treated Urban Wastewater

662

Optimization of solar district heating systems: seasonal storage, heat pumps, and cogeneration

663

Optimization of solar flat collector inclination Original Research Article

664

Optimization of solar photocatalytic degradation conditions of bisphenol A in water using titanium dioxide

665

Optimization of solar pond electrical power generation system

666

Optimization of solar powered hydrogen production using photovoltaic electrolysis devices

667

Optimization of solar systems using artificial neural-networks and genetic algorithms

668

Optimization of solar water heating systems through water replenishment

669

optimization of solar-photocatalytic degradation of polychlorinated biphenyls using photocatalyst (nd/pd/tio2) by taguchi technique and detection by solid phase nano extraction

670

Optimization of solar-powered reverse osmosis desalination pilot plant using response surface methodology Original Research Article

671

OPTIMIZATION OF SOLDER PASTE PRINTING PARAMETERS USING DESIGN OF EXPERIMENTS (DOE)

672

Optimization of Solder Paste Printing Parameters Using Design of Experiments (DOE)

673

Optimization of sol–gel/pyrolysis routes to silicon oxycarbide glasses

674

Optimization of solid phase extraction clean up and validation of quantitative determination of carbazochrome sodium sulfonate in human plasma by liquid chromatography-electrospray ionization tandem mass spectrometry

675

Optimization of solid phase extraction clean up and validation of quantitative determination of corticosteroids in urine by liquid chromatography–tandem mass spectrometry Original Research Article

676

Optimization of Solid Phase Extraction for Trace Determination of Cobalt (II) Using Chromosorb 102 in Biological Monitoring

677

Optimization of solid phase microextraction coatings for liquid chromatography mass spectrometry determination of neurotransmitters

678

Optimization of solid phase microextraction for non-lethal in vivo determination of selected pharmaceuticals in fish muscle using liquid chromatography–mass spectrometry

679

Optimization of Solid State Anaerobic Digestion by inoculum recirculation: The case of an existing Mechanical Biological Treatment plant

680

Optimization of Solid Waste Collection and Transportation System by Use of The TransCAD: A Case Study

681

optimization of solid waste collection system in a tourism destination

682

Optimization of solid-phase clean-up prior to liquid chromatographic analysis of ochratoxin A in roasted coffee

683

Optimization of solid-phase extraction and liquid chromatography–tandem mass spectrometry for the determination of domoic acid in seawater, phytoplankton, and mammalian fluids and tissues Original Research Article

684

Optimization of solid-phase extraction and solid-phase microextraction for the determination of α- and β-endosulfan in water by gas chromatography–electron-capture detection

685

Optimization of solid-phase extraction for a liquid chromatographic–tandem mass spectrometric general unknown screening procedure by means of computational techniques

686

Optimization of solid-phase extraction for a liquid chromatographic–tandem mass spectrometric general unknown screening procedure by means of computational techniques

687

Optimization of solid-phase extraction using artificial neural networks and response surface methodology in combination with experimental design for determination of gold by atomic absorption spectrometry in industrial wastewater samples

688

Optimization of solid-phase extraction using artificial neural networks in combination with experimental design for determination of resveratrol by capillary zone electrophoresis in wines

689

Optimization of solid-phase microextraction conditions for gas chromatographic determination of ethanol and other volatile compounds in blood

690

Optimization of solid-phase microextraction conditions for the determination of triclosan and possible related compounds in water samples

691

Optimization of solid-phase microextraction for the gas chromatographic–mass spectrometric determination of synthetic musk fragrances in water samples

692

Optimization of solid-phase microextraction of volatile phenols in water by a polyaniline-coated Pt-fiber using experimental design Original Research Article

693

Optimization of solid-state diffusion bonding of Hastelloy C-22 for micro heat exchanger applications by coupling of experiments and simulations

694

Optimization of solid-state medium for the production of inulinase by Aspergillus ficuum JNSP5-06 using response surface methodology

695

Optimization of solids-to-liquid and alkali activator ratios of calcined kaolin geopolymeric powder

696

Optimization of solution growth and characterization of monomethylurea crystals

697

Optimization of solution Kadomtsev-Petviashvili equation by using hompotopy methods

698

Optimization of Solution Stiff Differential Equations Using MHAM and RSK Methods

699

Optimization of solvent bar microextraction combined with gas chromatography for preconcentration and determination of methadone in human urine and plasma samples

700

Optimization of solvent bar microextraction combined with gas chromatography mass spectrometry for preconcentration and determination of tramadol in biological samples

701

Optimization of Solvent Extraction Parameters for Separation of Samarium and Lutetium from Acidic Media Using Response Surface Methodology (RSM)

702

Optimization of solvent media to solubilize TEV protease using response surface method

703

Optimization of solvent resistant nanofiltration membranes prepared by the in-situ diamine crosslinking method

704

Optimization of solvothermally synthesized ZIF67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution

705

Optimization of some experimental parameters in the electro membrane extraction of chlorophenols from seawater

706

Optimization of some factors affecting the performance of query expansion

707

Optimization of some instrumental factors in diffuse reflectance infrared Fourier transform spectroscopy

708

Optimization of some panel manufacturing parameters for the best bonding strength of plywood

709

Optimization of some parameters of stirred mill for ultra-fine grinding of refractory Au/Ag ores

710

Optimization of some parameters on agglomeration performance of Zonguldak bituminous coal by oil agglomeration

711

Optimization of some process variables in mass transfer kinetics of osmotic dehydration of pineapple slices

712

Optimization of sonochemical degradation of tetracycline in aqueous solution using sono-activated persulfate process

713

Optimization of Sorting Conditions for the Selection of Stable, High-Producing Mammalian Cell Lines

714

Optimization of Sorting Conditions for the Selection of Stable, High-Producing Mammalian Cell Lines

715

Optimization of Sound Transmission Loss of a Composite Rectangular Plate with Infinite Baffle

716

OPTIMIZATION OF SOURCE AND RATE OF SOIL APPLIED SILICON FOR IMPROVING THE GROWTH OF WHEAT

717

Optimization of sourdough fermentation with Lactobacillus brevis and bakerʹs yeast Original Research Article

718

Optimization of Soy-based Media for the Production of Biologically Active Exopolysaccharides by Medicinal Mushroom Trametes versicolor

719

Optimization of soybean hull acid hydrolysis and its characterization as a potential substrate for bioprocessing

720

Optimization of soy-biodiesel combustion in a modern diesel engine

721

Optimization of Space Station components using design code CometBoards Original Research Article

722

Optimization of spare capacity in self-healing multicast ATM network using genetic algorithm

723

Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis

724

Optimization of Spatial Association Rule Mining using Hybrid Evolutionary algorithm

725

OPTIMIZATION OF SPECIFIC DIE PROFILES IN THIN WALLED TUBE EXTRUSION

726

Optimization of Specific Power of Surface Mounted Axial Flux Permanent Magnet Brushless DC Motor for Electrical Vehicle Application

727

Optimization of specific rate of heat pumping in combined heat pump cycles

728

Optimization of specific rating for wind turbine arrays coupled to compressed air energy storage

729

Optimization of specimen preparation of thin cell section for AFM observation

730

Optimization of specimen preparation of thin cell section for AFM observation

731

Optimization of spectral functions of Dirichlet–Laplacian eigenvalues

732

Optimization of spectrophone performance for quartz-enhanced photoacoustic spectroscopy

733

Optimization of spent sulfite liquor fermentation

734

Optimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System

735

Optimization of spiroimidazolidinone derivatives synthesis on solid phase using SynPhase™ Lanterns

736

Optimization of sponge iron production in direct reduction plants with the KIPEX method

737

Optimization of Spongiochloris sp. biomass production in the abattoir digestate

738

Optimization of spot-welded structures

739

Optimization of spray drying conditions for lulo (Solanum quitoense L.) pulp

740

Optimization of Spray Drying Conditions for Production of Ice Cream Mix Powder Flavored With Black Mulberry Juice

741

Optimization of spray parameters in the fabrication of SnO2 layers using electrostatic assisted deposition technique

742

Optimization of Spray Pulse Reactor Conditions Used for Dehydrogenation of Liquid Organic Hydrides by Using Response Surface Methodology

743

Optimization of spray pyrolysis zirconia coatings on aluminized steel

744

Optimization of spray-dried hyaluronic acid microspheres to formulate drug-loaded bone substitute materials

745

Optimization of sprayed lime amount in the semi-dry scrubbing system of MSWI

746

Optimization of spread configuration for seismic data acquisition through numerical modeling in tectonically complex areas: a case study from Badarpur anticline, Cachar, India

747

Optimization of spreading and cutting sequencing model in garment manufacturing

748

Optimization of sputtering parameters for Ni–Cr alloy deposition on copper foil as embedded thin film resistor

749

Optimization of sputtering parameters for Smsingle bondCo thin films using design of experiments

750

Optimization of squeeze cast parameters of LM6 aluminium alloy for surface roughness using Taguchi method

751

Optimization of Sr content in layered SmBa1–xSrxCo2O5+δ perovskite cathodes for intermediate-temperature solid oxide fuel cells

752

Optimization of stability-constrained geometrically nonlinear shallow trusses using an arc length sparse method with a strain energy density approach

753

Optimization of Stack Emission Parameters Using Gaussian Plume Model

754

Optimization of stack filters based on mirrored threshold decomposition

755

Optimization of stacking high-density quantum dot molecules for photovoltaic effect

756

Optimization of Stakeholders’ Interaction in the Lean Management Process via a Dynamic Game Theory Approach: A Case Study of the National Southern Oilfields Company

757

Optimization of stamping processes aiming at maximal process stability

758

Optimization of Stand-alone Hybrid PV/Wind/Fuel-Cell System Considering Reliability Indices Using Cuckoo Optimization and Firefly Algorithm

759

Optimization of Starch Biopolymer Enriched with Chitosan Containing Rosemary Essential Oil and its Application in Packaging of Peanuts

760

Optimization of starch oleate derivatives from native corn and hydrolyzed corn starch by response surface methodology

761

Optimization of startup and shutdown operation of simulated moving bed chromatographic processes

762

Optimization of static output feedback using substitutive LMI formulation

763

Optimization of statistical sample sizes in simulation

764

Optimization of Stator Structure of Transverse Flux Motor Original Research Article

765

Optimization of stay cables in cable-stayed bridges using finite element, genetic algorithm, and B-spline combined technique

766

Optimization of steady flow heat pumps

767

Optimization of steady state recycling parameters utilizing polarimetry in chiral separations

768

Optimization of steam treatment as a method for upgrading rice straw as feeds

769

Optimization of Steam Treatment Conditions for Improving the Nutritive Value of Date Leaves

770

Optimization of Steam-Over-Solvent Injection in Fractured Reservoirs (SOS-FR) method using hybrid techniques: Testing cyclic injection case

771

OPTIMIZATION OF STEEL FRAMES WITH RELIABILITY CONSTRAINT UNDER THE EFFECT OF FIRE LOAD USING COLLIDING BODIES OPTIMIZATION ALGORITHM

772

OPTIMIZATION OF STEEL MOMENT FRAME BY A PROPOSED EVOLUTIONARY ALGORITHM

773

Optimization of Steel Production to Improve Lifecycle Environmental Performance

774

Optimization of steel structures using distributed simulated annealing algorithm on a cluster of personal computers

775

Optimization of STEM tomography acquisition — A comparison of convergent beam and parallel beam STEM tomography

776

Optimization of STEM tomography acquisition — A comparison of convergent beam and parallel beam STEM tomography

777

Optimization of stir bar sorptive extraction applied to the determination of pesticides in vinegars

778

Optimization of Stir Casting Method of Aluminum Matrix Composite (AMC) for the Hardness Properties by Using Taguchi Method

779

Optimization of Stirrer Designs in a Reverberation Chamber

780

OPTIMIZATION OF STIRRER WITH VARIOUS PARAMETERS IN REVERBERATION CHAMBER

781

Optimization of stochastic networks using simulated annealing for the storage and recalling of compressed images using SOM

782

Optimization of stochastic networks using simulated annealing for the storage and recalling of compressed images using SOM

783

Optimization of stomatal conductance for maximum carbon gain under dynamic soil moisture

784

Optimization of stone-quarry technologies

785

Optimization of Strain Distribution in the Roll Forming Process Using the Desirability Function and Finite Element Methods

786

Optimization of strain field distribution for generation of compound curve surfaces using line heating technique

787

Optimization of strength by microstructural refinement of MgY2Zn1 alloy during extrusion and ECAP processing

788

Optimization of Streptokinase Mutant Protein Purification Method using Affinity Chromatography Technique

789

Optimization of stress modes by energy compatibility for 4-node hybrid quadrilaterals

790

Optimization of stress relief heat treatment of PHWR pressure tubes (Zr–2.5Nb alloy)

791

Optimization of stress-strain behavior parameters by genetic algorithms method: Application to soft-matrix two-phase alloys

792

Optimization of structural combinations on the performance of a PEMFCʹs MEA

793

Optimization of structural designs for a safe failure pattern: layered material systems

794

Optimization of structural dynamic behaviour based on effective modal parameters

795

Optimization of structural parameters for elliptical cross-section spiral equal-channel extrusion dies based on grey theory

796

OPTIMIZATION OF STRUCTURE AND COLD STRENGTH FOR STRIP OF STRENGTH CATEGORY K52

797

Optimization of structure and material properties for solids composed of softening material

798

Optimization of structure and power supply conditions of catalytic gas sensor

799

Optimization of structure and preparing conditions of HTSC (Bi0.8Pb0.2)2(Sr1-yBay)2Ca2Cu3O10+δ to Obtain the Highest Tc

800

Optimization of Structure of Solar Cells Based on Lead Perovskites (CH3NH3PbX3, X: I, Br) Via Numerical Simulation

801

Optimization of structured catalyst carriers for VOC combustion

802

Optimization of structures in frictional contact

803

Optimization of structures with nonlinear behavior using equivalent loads Original Research Article

804

Optimization of structures with uncertain constraints based on convex model and satisfaction degree of interval Original Research Article

805

Optimization of struvite crystallization protocol for pretreating the swine wastewater and its impact on subsequent anaerobic biodegradation of pollutants

806

Optimization of sublimation growth of SiC bulk crystals using modeling

807

Optimization of sublimation growth of SiC bulk crystals using modeling

808

Optimization of Submerged Arc Welding process Parameters Using PCA-Based Taguchi Approach.

809

Optimization of submerged culture condition for the production of mycelial biomass and exopolysaccharides by Agrocybe cylindracea

810

Optimization of Submerged Culture Conditions for the Production of Mycelial Biomass and Exopolysaccharides from Lignosus rhinocerus

811

Optimization of submerged culture for the production of Lentinula edodes mycelia biomass and amino acid composition by different temperatures

812

Optimization of succinoglycan hydrocolloid production by Agrobacterium radiobacter grown in sugar beet molasses and investigation of its physicochemical characteristics

813

Optimization of sugarcane bagasse cellulose acetylation

814

Optimization of Sulphate-Reducing Bacteria for Treatment of Heavy Metals-Containing Laboratory Wastewater on Anaerobic Reactor

815

Optimization of supercritical carbon dioxide extraction of antioxidants from roasted wheat germ based on yield, total phenolic and tocopherol contents, and antioxidant activities of the extracts

816

Optimization of supercritical carbon dioxide extraction of essential oil from spearmint (Mentha spicata L.) leaves by using Taguchi methodology

817

Optimization of supercritical carbon dioxide extraction of Passiflora seed oil

818

Optimization of supercritical carbon dioxide extraction of silkworm pupal oil applying the response surface methodology

819

Optimization of supercritical carbon dioxide treatment for the inactivation of the natural microbial flora in cubed cooked ham

820

Optimization of supercritical CO2 extraction of different anatomical parts of lovage (Levisticum officinale Koch.) using response surface methodology and evaluation of extracts composition

821

Optimization of supercritical CO2 extraction of oleoresin from black pepper (Piper nigrum L.) and antioxidant capacity of the oleoresin

822

Optimization of Supercritical Co2 Extraction of Swietenia Mahagoni Seed by Response Surface Methodology

823

Optimization of supercritical CO2 extraction of Thymbra spicata oil

824

Optimization of supercritical CO2 process for the concentration of tocopherol, carotenoids and chlorophylls from residual olive husk

825

Optimization of supercritical dimethyl carbonate (SCDMC) technology for the production of biodiesel and value-added glycerol carbonate

826

Optimization of supercritical dimethyl carbonate method for biodiesel production

827

Optimization of supercritical extraction of nimbin from neem seeds in presence of methanol as co-solvent

828

Optimization of supercritical fluid extraction combined with dispersive liquid–liquid microextraction as an efficient sample preparation method for determination of 4-nitrotoluene and 3-nitrotoluene in a complex matrix

829

Optimization of supercritical fluid extraction for polychlorinated biphenyls from sediments

830

Optimization of supercritical fluid extraction of pesticide residues in soil by means of central composite design and analysis by gas chromatography–tandem mass spectrometry

831

Optimization of supercritical methanol reactive extraction by Response Surface Methodology and product characterization from Jatropha curcas L. seeds

832

Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm

833

Optimization of superplastic hydroforming process of Aluminium alloy 5083

834

Optimization of superplasticiser and viscosity modifying agent in self compacting mortar

835

Optimization of superprotonic acid salts for fuel cell applications

836

Optimization of supersonic nozzle flow for titanium dioxide thin-film coating by aerosol deposition

837

Optimization of supervised self-organizing maps with genetic algorithms for classification of urinary calculi

838

Optimization of supply chain finance based on Stackelberg model

839

Optimization of support positions to maximize the fundamental frequency of structures

840

Optimization of surface charge transfer processes on rutile TiO2 nanorods photoanodes for water splitting

841

Optimization of surface coating condition using vapor form of alkanethiol on Cu nano powders for the application of oxidation prevention

842

Optimization of surface condensate production from natural gases using artificial intelligence

843

Optimization of surface morphology and electrical parameters of Tl-Ba-Ca-Cu-O thin films for high frequency devices

844

Optimization of surface quality and shell porosity in low carbon steel hollow spheres produced by powder metallurgy

845

Optimization of Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) Using Response Surface Method and Radian Basis Function Network

846

Optimization of surface treatment to enhance fiber–matrix interface and performance of composites

847

Optimization of Surface Wave Identification and Measurement

848

Optimization of Surfactin Production by Bacillus subtilis ATCC 6633 in a Miniaturized Bioreactor

849

Optimization of Surge Arrester’s Location

850

Optimization of surgical care

851

Optimization of surgical strategy in parasagittal meningiomas. A 1605-case study

852

Optimization of survival and spore formation of Paenibacillus polymyxa SQR-21 during bioorganic fertilizer storage

853

Optimization of Suspension System of Sport Car in Three Dimensional Reactions Space

854

Optimization of Sustainable Vehicle Routing Problem Taking into Account Social Utility and Employing a Strategy with Multiple Objectives

855

Optimization of Sustainable-Robust Biofuel Supply Chain under Uncertainty

856

Optimization of sustained release aceclofenac microspheres using response surface methodology

857

Optimization of sustained release matrix tablet of metoprolol succinate using central composite design

858

Optimization of SW480 Colon Cancer Cells Transfection with Lipofectamine 2000

859

Optimization of Swelling Percentage of Poly(AAm-co-AA) in BaCl2 Salt Solution Using Response Surface Methodology (RSM)

860

Optimization of Swirling Flow Energy Parameters on the Velocity Profile after Local Obstacle by Firefly Algorithm

861

Optimization of switching frequencies in the limited-pool randomspace vector PWM strategy for inverter-fed drives

862

Optimization of symbol mappings for bit-interleaved coded Modulation with iterative decoding

863

Optimization of Synchronization Delay in Latissimus Dorsi Dynamic Cardiomyoplasty

864

Optimization of synthesis and characterization of nanosilica produced from rice husk (a common waste material)

865

Optimization of synthesis condition and electrode fabrication for spinel LiMn2O4 cathode

866

Optimization of synthesis condition and the electrochemical properties of LiVMO6−δ (M=Mo or W) as candidate positive electrode material for lithium batteries

867

Optimization of synthesis conditions for preparation of ceramic (A-type zeolite) membranes in dehydration of ethylene glycol

868

Optimization of synthesis conditions for rare-earth titanate based oxygen ion conductors

869

Optimization of Synthesis of Expandable Polystyrene by MultiStage Initiator Dosing

870

Optimization of synthesis of fatty acid methyl esters catalyzed by lipase B from Candida antarctica immobilized on hydrophobic supports

871

Optimization of synthesis of upconversion luminescence material NaYF4:Er3+,Yb3+ nanometer-phosphor by low-temperature combustion synthesis method

872

Optimization of synthesis parameters of mesoporous silica sol–gel thin films for application on 2024 aluminum alloy substrates

873

Optimization of Synthesis Procedure for NaX Zeolite by Taguchi Experimental Design and its Application in CO2 Adsorption

874

Optimization of synthesis time for high performance of NaA zeolite membranes synthesized via autoclave for water–ethanol separation Original Research Article

875

Optimization of synthesizing glucose 1-phosphate by sodium tripolyphosphate as a phosphorus acylating agent using response surface methodology

876

Optimization of Synthetic Glucose Oxidase Gene Using A Recombinant Combination Strategy in Pichia Pastoris GS115

877

Optimization of Synthetic Jet Position for Heat Transfer Enhancement and Temperature Uniformity of a Heated Wall in Micro-Channels

878

Optimization of system reliability in multi-factory production networks by maintenance approach

879

Optimization of system reliability in the presence of common cause failures

880

Optimization of system reliability in the presence of common cause failures

881

Optimization of systems with multiple performance measures via simulation: Survey and recommendations

882

Optimization of Tajoura MSF desalination plant Original Research Article

883

Optimization of tall guyed masts using genetic algorithms

884

Optimization of tandem queue systems with finite buffers

885

Optimization of tandem-structured dye-sensitized solar cell

886

Optimization of Tangential Cutting Force in Turning Operation in Machining of Unidirectional Glass Fiber Reinforced Plastics

887

Optimization of Tangential Cutting Force in Turning Operation in Machining of Unidirectional Glass Fiber Reinforced Plastics

888

Optimization of tank and flat-plate collector of solar water heating system for single-family households to assure economic efficiency through the TRNSYS program

889

Optimization of tapered end design for FRP strips bonded to RC beams

890

Optimization of Tapering Angle of Flow Channels of Pemfuel Cell: A Numerical Study

891

Optimization of target speeds of high-speed railway trains for traction energy saving and transport efficiency improvement

892

Optimization of tartaric/sulphuric acid anodizing process using Doehlert design

893

Optimization of Taxane Binding to Microtubules: Binding Affinity Dissection and Incremental Construction of a High-Affinity Analog of Paclitaxel Original Research Article

894

Optimization of TCP/HAP ratio for better properties of calcium phosphate scaffold via selective laser sintering

895

Optimization of teacher volunteer transferring problems using greedy genetic algorithms

896

Optimization of technical trading strategies and the profitability in security markets

897

Optimization of techniques for the maximal detection and quantification of Alzheimer’s-related neuropathology with digital imaging

898

Optimization of Technological Qualities of Photovoltaic Cells Based on Absorber Metamaterial (SRRs) Resonators

899

Optimization of Technology Mastery as Part of Increasing Employee Performance in the E-Commerce Industry

900

Optimization Of Telescopic Booms In The Mobile Cranes

901

Optimization of Temperature and Force Adaptation Algorithm in Hot Strip Mill Original Research Article

902

Optimization of temperature and light intensity for improved photofermentative hydrogen production using Rhodobacter capsulatus DSM 1710

903

Optimization of temperature and supporting electrolyte for ammonium removal using bioelectrochemical systems

904

Optimization of Temperature Level to Enhance Worker Performance in Automotive Industry

905

Optimization of temperature-controlled ionic liquid dispersive liquid phase microextraction combined with high performance liquid chromatography for analysis of chlorobenzenes in water samples

906

Optimization of temperature-controlled ionic liquid homogenous liquid phase microextraction followed by high performance liquid chromatography for analysis of diclofenac and mefenamic acid in urine sample

907

Optimization of temperature-dependent functionally graded material bodies

908

Optimization of temporal basis functions in dynamic PET imaging

909

Optimization of temporal basis functions in dynamic PET imaging

910

Optimization of Temporal Filters for Constructing Robust Features in Speech Recognition

911

Optimization of tensegrity structures

912

Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method

913

Optimization of tensile properties of evaporative pattern casting process through Taguchiʹs method

914

Optimization of Tensile Strength of Butt Joint Weldment on Mild Steel Plate Using Response Surface Methodology

915

Optimization of test and maintenance intervals based on risk and cost

916

Optimization of testing parameters on the wear behaviour of metal matrix composites based on the Taguchi method

917

Optimization of Tetraphenylsilane-Based Blue Organic Light-Emitting Devices with Copper Phthalocyanine

918

Optimization of textured structure on crystalline silicon wafer for heterojunction solar cell

919

Optimization of the 3 m TGM beamline, at CAMD, for constant initial state spectroscopy

920

Optimization of the 3 m TGM beamline, at CAMD, for constant initial state spectroscopy

921

Optimization of the 4-aryl group of 4-aryl-pyridine glucagon antagonists: development of an efficient, alternative synthesis

922

Optimization of the activated sludge anoxic reactor configuration as a means to control nutrient removal kinetically

923

Optimization of the active-layer morphology with a non-halogenic solvent for bulk-heterojunction polymer solar cells

924

OPTIMIZATION OF THE ACTIVITIES OF TOURISM ENTERPRISES

925

Optimization of the activity of CaO/Al2O3 catalyst for biodiesel production using response surface methodology Original Research Article

926

Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method

927

Optimization of the aerodynamic configuration of a tubular projectile based on blind Kriging

928

Optimization of the Al–Cr–Zn system at 460 C

929

Optimization of the allocation of dynamic vehicle routing with considering traffic

930

Optimization of the Allowable Speed on Iran’s Freeways to Reduce Violations and Accidents, Using Zero-Truncated Poisson Regression Model

931

Optimization of the amount of edging to increase rolling yields in a plate mill

932

Optimization of the amount of Nafion in multi-walled carbon nanotube/Nafion composites as Pt supports in gas diffusion electrodes for proton exchange membrane fuel cells

933

Optimization of the anaerobic treatment of a waste stream from an enhanced oil recovery process

934

Optimization of the Analysis of Almond DNA Simple Sequence Repeats (SSRs)Through Submarine Electrophoresis Using Different Agaroses and Staining Protocols

935

Optimization of the analytical extraction of polyamines from milk

936

Optimization of the analytical performance of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/F)

937

Optimization of the Angle Measure Technique for image analytical sampling of particulate matter

938

Optimization of the angle of attack of delta-winglet vortex generators in a plate-fin-and-tube heat exchanger

939

Optimization of the Antibody CH3 Domain by Residue Frequency Analysis of IgG Sequences

940

Optimization of the Antifungal Activity of Essential Oil Isolated from Aerial Parts of Thymus kotschyanus Boiss Hohen (Lamiaceae)

941

Optimization of the antifungal metabolite production in Streptomyces libani isolated from northern forests soils in Iran

942

Optimization of the antioxidant capacity of thyme (Thymus vulgaris L.) extracts: Management of the convective drying process assisted by power ultrasound Original Research Article

943

Optimization of the Arrangement of Solar Collectors with Large-Capacity Semicylindrical Heat Receivers

944

Optimization of the arsenazo-III method for the determination of uranium in water and plant samples

945

Optimization of the as-deposited 1.54 μm photoluminescence intensity in a-SiOx:H〈Er〉

946

Optimization of the atmospheric pollution monitoring network at Santiago de Chile

947

Optimization of the availability of the core CXRS diagnostics for ITER

948

Optimization of the AZO dyes decoloration process through neural networks: Determination of the H2O2 addition critical point

949

Optimization of the Ba+2 uptake in the formation process of hydrogels using central composite design: Kinetics and thermodynamic studies of malachite green removal by Ba-alginate particles

950

Optimization of the ballistic guide design for the SNS FNPB 8.9 إ neutron line

951

Optimization of the ballistic guide design for the SNS FNPB 8.9 إ neutron line

952

Optimization of the basal medium for improving production and secretion of taxanes from suspension cell culture of Taxus baccata L

953

Optimization of the beam geometry for the cold neutron tomography facility at the new neutron source in Munich

954

Optimization of the beta-globin LCR and promoter elements for lentiviral vector-encoded the beta-globin transgene expression in beta-thalassemic mice

955

Optimization of the binding properties of PNA-(5′)-DNA chimerae

956

Optimization of the biocide properties of chitosan for its application in the design of active films of interest in the food area

957

Optimization of the Biodecolorization Activity of the Ayapers dye Removal by Halmonas sp. Isolated from Urmia Lake

958

Optimization of the biological component of a bioelectrochemical cell

959

Optimization of the biomass production of oil algae Chlorella minutissima UTEX2341

960

Optimization of the Black-Scholes Equation with the Numerical Method of Local Expansion to Minimize Risk Coverage

961

Optimization of the buffer system of micellar electrokinetic capillary chromatography for the separation of the active components in Chinese medicine ‘SHUANGDAN’ granule by genetic algorithm Original Research Article

962

Optimization of the capillary zone electrophoresis method for Huperzine A determination using experimental design and artificial neural networks

963

Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method

964

Optimization of the catalytic ozonation process using copper oxide nanoparticles for the removal of benzene from aqueous solutions

965

Optimization of the cathode block shape of an aluminum electrolysis cell

966

Optimization of The Cell Aggregates Method for Isolation and Purification of Human Granulosa Cells from Follicular Fluid

967

Optimization of the Cellulase Free Xylanase Production by Immobilized Bacillus Pumilus

968

Optimization of the ceramization process for the production of three-dimensional biomorphic porous SiC ceramics by chemical vapor infiltration (CVI)

969

Optimization of the chemical vapor deposition process for carbon nanotubes fabrication

970

Optimization of the chemical vapor deposition process for carbon nanotubes fabrication

971

Optimization of the chemical vapor deposition process for fabrication of carbon nanotube/Al composite powders

972

Optimization of the chicken breast cooking process Original Research Article

973

Optimization of the chiral separation of a Ca-sensitizing drug on an immobilized polysaccharide-based chiral stationary phase: Case study with a preparative perspective

974

Optimization of the choice of the system electric drive-device—transmission for mechatronic applications

975

Optimization of the chopping process using at-line human evaluations and response surface methodology

976

Optimization of the chromatographic conditions for the determination of hormones by gas chromatography with mass spectrometry detection Original Research Article

977

Optimization of the class-selective extraction of triazines from aqueous samples using a molecularly imprinted polymer by a comprehensive approach of the retention mechanism

978

Optimization of the coagulation–flocculation treatment: influence of rapid mix parameters

979

Optimization of the coal flotation procedure using the Plackett–Burman design methodology and kinetic analysis

980

Optimization of the coating layer for the measurement of ammonia by diffusion denuders

981

Optimization of the coating parameters for micro-arc oxidation of Cp-Ti

982

Optimization of the cold rolling processing for continuous manufacturing of nanostructured Ti–Ni shape memory alloys

983

Optimization of the collection efficiency of a hexagonal light collector using quadratic and cubic Bézier curves

984

Optimization of the combing noil percentage for quality single and ply compact spun yarn

985

Optimization of the combustion of blends of domestic fuel oil and cottonseed oil in a non-modified domestic boiler

986

Optimization of the composite brick composed of expanded polystyrene and pumice blocks

987

Optimization of the composition of crop collections for ex situ conservation

988

Optimization of the concentration of photo-initiator in a one-step self-etch adhesive

989

Optimization of the concentric heat exchanger with injector turbulators by Taguchi method

990

Optimization of the conditions of isolation and culture of dairy goat male germline stem cells (mGSC)

991

Optimization of the Conditions of Process of Production of Pectin Extracted from the Waste of Potato Peel

992

Optimization of the configuration of 290 × 140 × 90 hollow clay bricks with 3-D numerical simulation by finite volume method

993

Optimization of the Constant Power Speed Range of a Saturated Permanent-Magnet Synchronous Motor

994

Optimization of the Construction System of Relief Tents Used in Emergency Accommodation

995

Optimization of the content of retained austenite in Fe–(0.01–0.045)C–14Cr–(4–9)Ni weld metals for strength–ductility balance

996

Optimization of the contents of Arabic gum, xanthan gum and orange oil affecting turbidity, average particle size, polydispersity index and density in orange beverage emulsion

997

Optimization of the control parameters of a pneumatic servo cylinder drive using genetic algorithms

998

Optimization of the cooling circuit and thermo-mechanical analysis for the extraction grid of ELISE

999

Optimization of the cooling profile to improve the filterability of crystals isolated during an optical resolution by diastereomeric salt formation

1000

Optimization of the core configuration design using a hybrid artificial intelligence algorithm for research reactors Original Research Article

بازگشت