<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Preparation of (Ba,Sr)TiO3@polystrene core-shell nanoparticles by solvent-free surface-initiated atom transfer radical polymerization
2
Preparation of (BaxSr1−x)TiO3 sols used for ceramic film jet-printing
3
Preparation of (Ca, Mg) α-SiAlON powders by combustion synthesis
4
Preparation of (CdO)1−x(PbO)x and (CdS)1−x(PbS)x thin films by spray pyrolysis technique and their characterization
5
Preparation of (E)-1-aryl-3,3,3-trifluoro-1,2-di(trimethylsilyl)-1-propenes via stereoselective bissilylation of trifluoromethyl aryl acetylenes and electrophilic substitution of its TMS groups
6
Preparation of (epsilon)-Caprolactam via Beckmann Rearrangement of Cyclohexanone Oxime: A Mild and Recyclable Process
7
Preparation of (Ga1−xZnx) (N1−xOx) solid-solution from ZnGa2O4 and ZnO as a photo-catalyst for overall water splitting under visible light Original Research Article
8
Preparation of (gamma)-Aminobutyric Acid Using E. coli Cells with High Activity of Glutamate Decarboxylase
9
Preparation of (Gd,Y)AlO3:Eu3+ by citric-gel method and their photoluminescence under VUV excitation
10
Preparation of (hydrophilic) INZ/PLGA particles (microcapsules) employing a unique frozen water phase — investigation of optimal formulation
11
Preparation of (MWCNTs)-COOH/CeO2Hybrid as an Efficient Catalyst for Claisen-Schmidt Condensation
12
Preparation of (Ni0.5Zn0.5)Fe2O4/Pb(Zr0.53Ti0.47)O3 thick films and their magnetic and ferroelectric properties
13
Preparation of (Ni–B)/SiO2, Ni/SiO2 and NiO/SiO2 nanocomposites
14
Preparation of (Pb, La)(Zr, Sn, Ti)O3 antiferroelectric ceramics using colloidal processing and the field induced strain properties
15
Preparation of (U,Pu)O2 pellets through sol–gel microsphere pelletization technique
16
Preparation of (Z)- and (E)-vinyl selenides utilizing vinylboronic acids and vinylboronic esters in ionic liquids
17
Preparation of (Z)-1-fluoro-1-alkenyl carboxylates, carbonates and carbamates through chromium mediated transformation of dibromofluoromethylcarbinyl esters and the reactivity as double acyl group donors
18
Preparation of (Z)-α-chloro-α,β-unsaturated ketones with total or high diastereoselectivity
19
Preparation of [186Re]Re–DMSA and its bio-distribution studies
20
Preparation of [61Cu]-2-acetylpyridine thiosemicarbazone complex as a possible PET tracer for malignancies
21
Preparation of [64Cu] Pyruvaldehyde-bis (N4-methylthiosemicarbazone) complex as a PET and/or therapeutic radiopharmaceutical
22
Preparation of [Bu4N]2[W6Cl8F6] and characterization of the clusters [Bu4N]2[W6Cl8X6] (X=F, Cl, Br, I, NCO, NCS, NCSe, or OSO2CF3) by 183W NMR spectroscopy
23
Preparation of [Et2InSb(SiMe3)2]3; a trimeric single-source precursor to indium antimonide
24
Preparation of [meso-tetraphenylchlorophinato]nickel(II) by stepwise deformylation of [meso-tetraphenyl-2,3-diformyl-secochlorinato]nickel(II): conformational consequences of breaking the structural integrity of nickel porphyrins
25
Preparation of ^177Lu-Rituximab and Comparison with ^131I-Rituximab Radiolabeled with Chloramine-T Method
26
Preparation of {0 1 0}-faceted anatase TiO2 nanocuboids from peroxotitanium complex solution
27
Preparation of ‘cage molecule’ based polyazido core units for dendrimer synthesis
28
Preparation of ‘carba’ dipeptides bearing a basic side-chain at the C-terminus: synthesis of enantiopure Boc-d-Phe-Ψ[CH2CH2]-l-Arg(NO2)-OH and Boc-d-Phe-Ψ[CH2CH2]-d-Arg(NO2)-OH
29
Preparation of ‘near’ homogeneous samples for the analysis of matrix-assisted laser desorption/ionisation processes
30
Preparation of “intelligent” Pt/Ni/Mg(Al)O catalysts starting from commercial Mg–Al LDHs for daily start-up and shut-down steam reforming of methane
31
Preparation of “pore-fill” type Pd–YSZ–γ-Al2O3 composite membrane supported on α-Al2O3 tube for hydrogen separation
32
Preparation of 〈1 1 1〉-textured BaTiO3 ceramics by templated grain growth method using novel template particles
33
Preparation of 1-(3-aminobenzo[d]isoxazol-5-yl)-1H-pyrazolo[4,3-d]pyrimidin-7(6H)-ones as potent, selective, and efficacious inhibitors of coagulation factor Xa
34
Preparation of 1-(4-methoxyphenyl)-1H-pyrazolo[4,3-d]pyrimidin-7(6H)-ones as potent, selective and bioavailable inhibitors of coagulation factor Xa
35
Preparation of 1-(benzothiazolylamino)methyl -2-naphthols using multi-SO3H functionalized ionic liquid under solvent-free conditions
36
Preparation of 1,1,1,2-tetrafluoroethane by the vapor-phase catalytic reaction of 1,1,1-trifluoro-2-chloroethane with anhydrous hydrogen fluoride
37
Preparation of 1,1,1,3,3-pentafluoropropane (HFC-245fa) by using a SbF5-attached catalyst
38
Preparation of 1,1,2-trifluoro-2-trimethylsilylethylene
39
Preparation of 1,1-disubstituted silacyclopentadienes
40
Preparation of 1,2,4-trisubstituted imidazoles by ammonolysis of N-(2-oxoalkyl)oxazolinium salts
41
Preparation of 1,2-O-isopropylidene derivatives of α-d-galactoseptanose, β-l-altroseptanose, and 3-O-methyl-α-d-guloseptanose Original Research Article
42
Preparation of 1,3,5-thiadiazine-2-thione derivatives of chitosan and their potential antioxidant activity in vitro
43
Preparation of 1,3,5-tribenzylhexahydro-1,3,5-triazine-CrCl3 catalyst supported on SiO2 and activity studies in ethylene polymerization
44
Preparation of 1,3,5-trithia-2,4,6-triazapentalenyl films on gold surfaces
45
Preparation of 1,3-bis(allyloxy)benzene under a new multi-site phase-transfer catalyst combined with ultrasonication – A kinetic study
46
Preparation of 1,3-bis(allyloxy)benzene under a new multi-site phase-transfer catalyst combined with ultrasonication – A kinetic study
47
Preparation of 1,3-dienyl organotrifluoroborates and their Diels–Alder/cross-coupling reactions
48
Preparation of 1,4,5,8-tetra-tert-butyl-1,3,5,7-cyclooctatetraene by twofold SO2 extrusion
49
Preparation of 1,4-Dihydroquinolines Bearing a Chiral Sulfoxide Group: New Highly Enantioselective Recyclable NADH Mimics
50
Preparation of 1,5-diaryl-3-(arylamino)-1H-pyrrol- 2(5H)-one derivatives using 1-methylpiperidinium hydrogen sulfate as an efficient catalyst
51
Preparation of 1,5-diketone derivatives containing ferrocenyl by Michael reaction under solvent-free condition
52
Preparation of 103Pd seed–molecular plating of 103Pd onto silver rod
53
Preparation of 10Be targets by high vacuum evaporation–condensation
54
Preparation of 10Be targets by high vacuum evaporation–condensation
55
Preparation of 124I solutions after thermodistillation of irradiated 124TeO2 targets
56
Preparation of 137Cs and 60Co sealed sources based on inorganic sorbents for radiometric calibration purposes
57
Preparation of 14,36-didehydro pristinamycins Iis
58
Preparation of 15 mol% YO1.5-doped ThO2 disk electrolytes by a polymeric gel-combustion method
59
Preparation of 152Gd targets from a small quantity of gadolinium oxide in a pyrochemical reaction
60
Preparation of 153Sm-Chitosan Complex for radiation synovectomy
61
Preparation of 15-membered unsaturated N–H containing azamacrocycles and their differential coordination with Pd(0) and Pd(II)
62
Preparation of 180Ta targets by high vacuum evaporation-condensation
63
Preparation of 180Ta targets by high vacuum evaporation-condensation
64
Preparation of 188Re-labeled paper for treating skin cancer
65
Preparation of 188Re-RC-160 somatostatin analog: a peptide for local/regional radiotherapy
66
Preparation of 1-aryl-2,2-difluoro enol esters via dehydrosulfonylation of α-(phenylsulfonyl)difluoromethylated benzoates
67
Preparation of 1-arylazulenes through regioselective photoarylation of azulene with aryl iodides
68
Preparation of 1-C-glycosyl aldehydes by reductive hydrolysis Original Research Article
69
Preparation of 1-methyl-3-propylimidazolium acetate and its application in dye sensitized solar cells
70
Preparation of 2-(N,N-dialkylamino)-2,4,6- cycloheptatrien-1-one derivatives from an isocyanide, a primary amine, propionaldehyde, and tropolone via Ugi-Smiles coupling reaction in the presence of silica nanoparticles
71
Preparation of 2,2-difluoro-1-trialkylsilylethenylstannanes and their cross-coupling reactions
72
Preparation of 2,2-disubstituted 1,2-dihydro-3H-indol-3-ones via oxidation of 2-substituted indoles and Mannich-type reaction
73
Preparation of 2,3,6,2′,3′,4′,6′-hepta-O-acetyl-maltose/cellobiose by enzymatic hydrolysis of maltose/cellobiose octaacetate
74
Preparation of 2,3-diaminopropionate from ring opening of aziridine-2-carboxylate
75
Preparation of 2,3-dihydro-1H-spiro[isoquinoline-4,4′-piperidine] via an N-sulfonyl Pictet–Spengler reaction
76
Preparation of 2,3-disubstituted indoles by sequential Larock heteroannulation and silicon-based cross-coupling reactions
77
Preparation of 2,4,5-trisubstituted pyrazolo[4,3-c]quinolin-3-ones
78
Preparation of 2,4-dichlorophenoxyacetic acid imprinted organic–inorganic hybrid monolithic column and application to selective solid-phase microextraction
79
Preparation of 2,6-anhydro-aldose acylhydrazones, -semicarbazones and -oximes from 2,6-anhydro-aldononitriles (glycosyl cyanides)
80
Preparation of 2,6-difluoromanoalogues derivatives
81
Preparation of 2,7-Diamino-1,8-naphthyridine: A Useful Building Block for Supramolecular Chemistry
82
Preparation of 2′-aminoacetophenones: a one-pot hydration and reduction of 1-ethynyl-2-nitrobenzenes
83
Preparation of 231Pa targets
84
Preparation of 231Pa targets
85
Preparation of 2A,3A-alloepimino-2A,3A-dideoxy-β-cyclodextrin as a versatile scaffold candidate for the hetero-2A,3A-bifunctionalization
86
Preparation of 2-Alkyl- and 2-Acylpropenals from 5-(Trifluoromethanesulfonyloxy)-4H-1,3-dioxin: A Versatile Acrolein α-Cation Synthon
87
Preparation of 2-amino-2-C-glycosyl-acetonitriles from C-glycosyl aldehydes by Strecker reaction Original Research Article
88
PREPARATION OF 2-AMINOETHYLSULFONIC ACID
89
Preparation of 2-aminosubstituted 3H-imidazo[4,5-c]quinolin-4(5H)-ones by palladium-assisted internal biaryl coupling reaction
90
Preparation of 2-arylated-1,4-phenylenediamines by palladium-catalyzed cross-coupling reactions
91
Preparation of 2-azaallyl anions and imines from N-chloroamines and their cycloaddition and allylation
92
Preparation of 2-C- and 3-C-cyano-2-enopyranoside derivatives and their epoxidation Original Research Article
93
Preparation of 2-deoxyaldoses from aldose phenylhydrazones
94
Preparation of 2-deoxystreptamine derivatives with all-axial substituents for desymmetrization
95
Preparation of 2-hydroxybenzamidines from 3-aminobenzisoxazoles
96
Preparation of 2-mercaptobenzothiazole-labeled immuno-Au aggregates for SERS-based immunoassay
97
Preparation of 2-phospholene derivatives from zirconacyclopentenes
98
Preparation of 2-propyl heptanol by catalytic hydrogenation of 2-propyl-2-heptenal Original Research Article
99
Preparation of 2-trimethylsilylmethyl-1-alkene; cross-coupling and protodesilylation sequence from 1,1-dibromo-1-alkene
100
preparation of 3, 4-dihydropyrimidin-2(1H)-ones using quaternary ammonium- treated clay in water
101
Preparation of 3,3-disubstituted oxindoles by addition of malonates to 3-halo-3-oxindoles
102
Preparation of 3,4-di-t-butylthiophene 1-imide and its N-substituted derivatives
103
Preparation of 3,4-enynoindoles via directed lithiation and application to the synthesis of 3,4-carbocycloindoles
104
Preparation of 3,4-fused-spiro[furan-5(5H),4′-piperidin]-2-one
105
Preparation of 3,5-bis-(β-d-glycopyranosyl)-1,2,4-thiadiazoles from C-(β-d-glycopyranosyl)thioformamides
106
Preparation of 3-alkylpyridines. Formal total synthesis of Haliclamines A and B
107
Preparation of 3-arylmethylindoles as selective COX-2 inhibitors
108
Preparation of 3-aryl-substituted salicylaldehydes via Suzuki coupling
109
Preparation of 3D Cf/ZrC–SiC composites by joint processes of PIP and RMI
110
Preparation of 3D interconnected macroporous hydroxyapatite scaffolds by PVA assisted foaming method
111
Preparation of 3D orthogonal woven C–SiC composite and its characterization for thermo-mechanical properties
112
Preparation of 3-D scaffolds in the SiO2–P2O5 system with tailored hierarchical meso-macroporosity
113
Preparation of 3D ZnSe novel structure Original Research Article
114
Preparation of 3D-Cf/SiC composites at low temperatures
115
Preparation of 3H-ATP-incorporated silica nanoparticles and its diffusive release
116
Preparation of 3-spirocyclic indolin-2-ones as ligands for the ORL-1 receptor
117
Preparation of 3-substituted and 2,3-disubstituted-4,4,4-trifluoro-2-butenoic acids—Perkin condensation of activated aromatic ketones
118
Preparation of 3-substituted-2-pyridin-2-ylindoles: regioselectivity of Larock’s indole annulation with 2-alkynylpyridines
119
Preparation of 3-trifluoromethyl-2-cycloalkenones by the oxidative rearrangement of trifluoromethylated tertiary allylic alcohols with pyridinium chlorochromate
120
Preparation of 3YSZ/Cu composite by in-situ chemical route
121
Preparation of 4,4′-(1-[2H6]methylethylidene)bis-[2,3,5,6-2H4]phenol and its application to the measurement of bisphenol A in beverages by stable isotope dilution mass spectrometry
122
Preparation of 4,5 disubstituted-2H-1,2,3-triazoles from (Z)-2,3-diaryl substituted acrylonitriles
123
Preparation of 4:55:45 samarium doped PZT films by sol-gel technique and their characterization
124
Preparation of 4′-benzenesulfonyl-3′-deoxythymidine and its reaction with organoaluminum and organosilicon reagents Original Research Article
125
Preparation of 4-aryl-2-trifluoromethylbenzonitrile derivatives as androgen receptor antagonists for topical suppression of sebum production
126
Preparation of 4-heteroaryl-4-cyanopiperidines via SNAr substitution reactions
127
Preparation of 4-trifluoroethylidene-1,3-dioxolane derivatives via new stable (trifluoromethyl)ethynylation reagent
128
Preparation of 5-(2,6-dideoxy-2-fluoro-α- -talopyranosyloxy)-6-hydroxynaphtho[2,3-f]quinoline-7,12-dione (FT-Alz), a new-type, potentially antitumor substance with various biological activities
129
Preparation of 5-(cyclohexylmethyl)barbituric acid derivatives by acid-catalyzed reductive cyclohexylmethylation of barbituric acids with p-hydroxy or p-methoxybenzaldehydes
130
Preparation of 5-amino-6-oxo-1,6-dihydro[1,2,4]triazine-3-carboxylic acid derivatives and synthesis of compound libraries thereof
131
Preparation of 5-aryl-3-alkylthio-l,2,4-triazoles and corresponding sulfones with antiinflammatory–analgesic activity Original Research Article
132
Preparation of 5-benzotriazolyl-4-hydroxy-3-sec-butylbenzenesulfonate anion-intercalated layered double hydroxide and its photostabilizing effect on polypropylene
133
Preparation of 5-chloropyrazoles via tandem Meyer–Schuster/von Auwers rearrangements
134
Preparation of 5-diaminomethylenebarbiturates by barbituric acid addition to carbodiimides
135
Preparation of 5-formyl- and 5-acetylbarbituric acids, including the corresponding Schiff bases and phenylhydrazones
136
Preparation of 5-Selenopentopyranose Sugars from Pentose Starting Materials by Samarium(II) Iodide or (Phenylseleno)formate Mediated Ring Closures
137
Preparation of 5-substituted 2-carboxyindoles on solid support
138
Preparation of 5-telluropentopyranose sugars from common pentose starting materials
139
Preparation of 6,6,1′,1′,6′,6′-hexadeutero sucrose
140
Preparation of 61,62-, 61,63-, 61,64-, and 61,65-di-O-(α-d-glucopyranosyl) cyclomalto-octaoses
141
Preparation of 68Ga-PSMA-11 with a Synthesis Module for Micro PET-CT Imaging of PSMA Expression during Prostate Cancer Progression
142
Preparation of 6-aminoquinazolin-4(3H)-ones via direct SNAr on the quinazoline ring
143
Preparation of 6-azafulleroid-6-deoxy-2,3-di-O-myristoylcellulose
144
Preparation of 6-chloro-5-fluoroindole via the use of palladium and copper-mediated heterocyclisations
145
Preparation of 6-chloropyrazolo[3,4-b]pyridine-5-carbaldehydes by Vilsmeier–Haack reaction and its use in the synthesis of heterocyclic chalcones and dipyrazolopyridines
146
Preparation of 6LiF deposits and characterisation via Monte Carlo simulations and Neutron Depth Profiling
147
Preparation of 6LiF deposits and characterisation via Monte Carlo simulations and Neutron Depth Profiling
148
Preparation of 6N high-purity indium by method of physical-chemical purification and electrorefining
149
Preparation of 9/65/35 PLZT thin films deposited by a dip-coating process
150
Preparation of 99mTc labeled substance P (SP)
151
Preparation of 99mTcN(CBDTC)2 and its biodistribution in mice
152
Preparation of 99mTc-nitrido asymmetrical heterocomplex with 4-(cyclohexylpiperazin-1-yl)-dithioformate and its biological evaluation as a potential myocardial imaging agent
153
Preparation of 9-deoxo-4″-deoxy-6,9-epoxyerythromycin lactams “motilactides”: Potent and orally active prokinetic agents
154
Preparation of a 1 mg/cm2 13C target
155
Preparation of a 1 mg/cm2 13C target
156
Preparation of a 10 nm thick single-crystal silicon membrane self-supporting over a diameter of 1 mm
157
Preparation of a 153Sm-5,10,15,20-tetrakis(4-methoxyphenyl) porphyrin complex as a possible therapeutic agent
158
Preparation of a 2-(4-fluorophenyl)indole-modified xerogel and its use for the fabrication of screen-printed electrodes for the electrocatalytic determination of sulfide
159
Preparation of a 2-(4-fluorophenyl)indole-modified xerogel and its use for the fabrication of screen-printed electrodes for the electrocatalytic determination of sulfide Original Research Article
160
Preparation of a 35S-source for β-spectroscopy
161
Preparation of a 35S-source for β-spectroscopy
162
Preparation of a 60Fe target for nuclear astrophysics experiments
163
Preparation of a 60Fe target for nuclear astrophysics experiments
164
Preparation of a 6Li0.74Mg0.26 alloy target
165
Preparation of a 6Li0.74Mg0.26 alloy target
166
Preparation of a Ag/SiO2 nanocomposite using a fluidized bed microwave plasma reactor, and its hydrodesulphurization and Escherichia coli bactericidal activities
167
Preparation of a barley bran protein–gelatin composite film containing grapefruit seed extract and its application in salmon packaging Original Research Article
168
Preparation of a beam quality indicator for effective energy determinations of continuum beams: establishment of traceability
169
Preparation of a beam quality indicator for effective energy determinations of continuum beams: establishment of traceability
170
Preparation of a beef-extract as a laboratory reference material for the determination of heterocyclic amines
171
Preparation of a BiFeO3/LaNiO3 multiferroic oxide superlattice structure by RF magnetron sputtering
172
Preparation of a bifunctional pyrazosulfuron-ethyl imprinted polymer with hydrophilic external layers by reversible addition–fragmentation chain transfer polymerization and its application in the sulfonylurea residue analysis
173
Preparation of a bioactive and degradable poly( -caprolactone)/silica hybrid through a sol–gel method
174
Preparation of a biphasic porous bioceramic by heating bovine cancellous bone with Na4P2O7 · 10H2O addition
175
Preparation of a biphasic scaffold for osteochondral tissue engineering
176
Preparation of a blocked isocyanate compound and its grafting onto styrene-b-(ethylene-co-1-butene)-b-styrene triblock copolymer
177
Preparation of a boron nitride single layer on a polycrystalline Rh surface
178
Preparation of a bromine-76 labelled analogue of epibatidine: a potent ligand for nicotinic acetylcholine receptor studies
179
Preparation of a carbon ceramic electrode modified by 4-(2-pyridylazo)-resorcinol for determination of trace amounts of silver
180
Preparation of a carbon monolith with hierarchical porous structure by ultrasonic irradiation followed by carbonization, physical and chemical activation Original Research Article
181
Preparation of a carbon nanofiber/natural graphite composite and an evaluation of its electrochemical properties as an anode material for a Li-ion battery
182
Preparation of a carbon nanofiber/natural graphite composite and an evaluation of its electrochemical properties as an anode material for a Li–ion battery
183
Preparation of a carbon nanotube film by ink-jet printing
184
Preparation of a carbon nanotube/carbon fiber multi-scale reinforcement by grafting multi-walled carbon nanotubes onto the fibers Original Research Article
185
Preparation of a carbon nanotube-copper nanoparticle hybrid by chemical reduction for use in the electrochemical sensing of carbohydrates Original Research Article
186
Preparation of a carbon paste/alcohol dehydrogenase electrode using polyethylene glycol-modified enzyme and oil-soluble mediator
187
Preparation of a carbon supported Pt catalyst using an improved organic sol method and its electrocatalytic activity for methanol oxidation
188
Preparation of a carbon with a 2 nm pore size and of a carbon with a bi-modal pore size distribution
189
Preparation of a Catalyst Composite Silica Membrane Reactor for Steam Reforming Reaction by Using a Counterdiffusion CVD Method
190
Preparation of a cationic bisoxazolinic nickel pincer catalyst and its applications to Michael addition and Mizoroki–Heck reaction
191
Preparation of a Chelating Resin and its Application as a Preconcentration System for Determination of Cadmium in River Water by Flow Injection Analysis
192
Preparation of a chemically anchored phospholipid monolayer on an acrylated polymer substrate
193
Preparation of a chiral azadiene for the synthesis of 5-aza analogues of angucyclinones
194
Preparation of a Clay Pillared with Rodlike Cationic Polysiloxane
195
Preparation of a clay–metal complex hybrid film by the Langmuir–Blodgett method and its application as an electrode modifier
196
Preparation of a cobalt-containing P,N-bidentate ligand ligated palladium complex: Its applications in amination and Suzuki cross-coupling reactions
197
Preparation of a collagen/polymer hybrid gel designed for tissue membranes. Part I: Controlling the polymer–collagen cross-linking process using an ethanol/water co-solvent
198
Preparation of a collagen/polymer hybrid gel for tissue membranes. Part II: In vitro and in vivo biological properties of the collagen gels
199
Preparation of a Combined Vaccine for Clostridial Diseases and Rabies in Sheep
200
Preparation of a composite catalyst for the decomposition of N2O gas using ultrafine particle beams: Silver-cobalt monoxide binary metal system Original Research Article
201
Preparation of a composite coagulant: Polymeric aluminum ferric sulfate (PAFS) for wastewater treatment Original Research Article
202
Preparation of a composite γ-zirconium phosphate-silica with large specific surface and its first characterisation as acid catalyst Original Research Article
203
Preparation of a conducting polymer/ferromagnet composite film by anodic-oxidation method
204
Preparation of a coprecipitated Cu/ZnO catalyst for the methanol synthesis from CO2 — effects of the calcination and reduction conditions on the catalytic performance Original Research Article
205
Preparation of a core–shell type MBHA resin and its application for solid-phase peptide synthesis
206
Preparation of a CO-tolerant PtRuxSny/C electrocatalyst with an optimal Ru/Sn ratio by selective Sn-deposition on the surfaces of Pt and Ru
207
Preparation of a crack-free rough titania coating on stainless steel mesh by electrophoretic deposition
208
Preparation of a crosslinked sucrose polymer by thiol–ene photopolymerization using dithiothreitol as comonomer
209
Preparation of a crown-ether-modified lophine peroxide as a guest-sensitive novel chemiluminophore and modulation of its chemiluminescence by metal cations
210
Preparation of a crude enzymatic from Bacillus licheniformes E-44 and its evaluation in the hydrolysis of Saccharomyces cerevisiae cell walls
211
Preparation of a Delayed Releasing Device of Hydroxypropyl MethylcelluJose Phthalate MacrocapsuJes Containing Peppermint Oil
212
Preparation of a diacylglycerol-enriched soybean oil by phosphalipase A1 catalyzed hydrolysis
213
Preparation of a dibenzylated 1,4-diazacyclohexane-derived strong anion-exchange stationary phase
214
Preparation of a direct methanol fuel cell tubular cathode support from mesocarbon microbeads and graphite
215
Preparation of a FeOCl derivative with pyrrole and its performance as a cathode material in a secondary lithium battery system
216
Preparation of a filter bed coupled with Mn-TiO2/ZnO nanocomposite for the treatment of micro-pollutants in municipal wastewater
217
Preparation of a fine powder composed of oxide–metal composite by an arc-plasma method
218
Preparation of a flexible organic–inorganic hybrid proton-conducting membrane for non-humidified conditions
219
Preparation of a fluorous chiral BINAP and application to an asymmetric Heck reaction
220
Preparation of a Fluorous Chiral BINOL Derivative and Application to an Asymmetric Protonation Reaction
221
Preparation of a gabapentin potentiometric sensor and its application to pharmaceutical analysis
222
Preparation of a gabapentin potentiometric sensor and its application to pharmaceutical analysis
223
Preparation of a GdCaAl3O7 matrix by the non-hydrolytic sol–gel route
224
Preparation of a geotechnical microzonation model using Geographical Information Systems based on Multicriteria Decision Analysis
225
Preparation of a glucan from the roots of Rubus crataegifolius Bge. and its immunological activity Original Research Article
226
Preparation of a graphene nanosheet/polyaniline composite with high specific capacitance Original Research Article
227
Preparation of a graphene oxide–phthalocyanine hybrid through strong π–π interactions Original Research Article
228
Preparation of a graphene-based magnetic nanocomposite for the extraction of carbamate pesticides from environmental water samples
229
Preparation of a graphite-like pyropolymer from 6-trimethylsilyl-3,5-hexadiyn-2-one
230
Preparation of a growth-promoting substance, lepidimoic acid, from okra pectic polysaccharide
231
Preparation of a hemiporous hydroxyapatite scaffold and evaluation as a cell-mediated bone substitute
232
Preparation of a high performance carbon/ carbon composite throat insert woven with axial carbon rods
233
Preparation of a high performance carbon/carbon composite throat insert woven with axial carbon rods
234
Preparation of a high performance Pt–Co/C electrocatalyst for oxygen reduction in PEM fuel cell via a combined process of impregnation and seeding
235
Preparation of a high pH-resistant AAPTS-silica coating and its application to capillary microextraction (CME) of Cu, Zn, Ni, Hg and Cd from biological samples followed by on-line ICP-MS detection Original Research Article
236
Preparation of a high strength Al–Cu–Mg alloy by mechanical alloying and press-forming
237
Preparation of a high-immunoglobulin product from bovine colostrum
238
Preparation of a highly active Fe-ZSM-5 catalyst through solid-state ion exchange for the catalytic decomposition of N2O Original Research Article
239
Preparation of a highly fluorophilic phosphonium salt and its use in a fluorous anion-exchanger membrane with high selectivity for perfluorinated acids
240
Preparation of a highly microporous carbon from a carpet material and its application as CO2 sorbent
241
Preparation of a highly stable, very active and high-yield multilayered assembly of glucose oxidase using carbohydrate-specific polyclonal antibodies
242
Preparation of a highly thermally stable titania anatase phase by addition of mixed zirconia and silica dopants
243
Preparation of a highly-reflective TiO2/SiO2/Ag thin film with self-cleaning properties by magnetron sputtering for solar front reflectors
244
Preparation of a high-quality synthetic steamcracker feedstock from methylcyclohexane on acidic zeolite H-ZSM-5: influence of the hydrogen partial pressure
245
Preparation of a hollow porous molecularly imprinted polymer using tetrabromobisphenol A as a dummy template and its application as SPE sorbent for determination of bisphenol A in tap water
246
Preparation of a hybrid organic–inorganic material containing macrocyclic triolefinic 15-membered palladium(0) complex: Catalytic activity in Suzuki cross-coupling and butadiene telomerization reactions Original Research Article
247
Preparation of a hydrotalcite-like compound using calcined dolomite and polyaluminum chloride
248
Preparation of a hydroxypropyl Ganoderma lucidum polysaccharide and its physicochemical properties
249
Preparation of a K39sub Recombinant Antigen for the Detection of Leishmania infantum Antibodies in Human: a Comparative Study with an Immunochromatographic Test and Direct Agglutination
250
Preparation of a Lead Ion-Selective Electrode Based Upon Crown Ether Nitrobenzo18-Crown-6
251
Preparation of a lead sensor based on porous multiwalled carbon nanotubes/thiolated chitosan composite materials
252
Preparation of a liquid nitrogen target for measurement of γ-rays in the 14N(n, γ)15N reaction as an intensity standard in energy regions up to 11 MeV
253
Preparation of a low proton resistance PBI/PTFE composite membrane
254
Preparation of a low-molecular weight fraction by free radical depolymerization of the sulfated galactan from Schizymenia binderi (Gigartinales, Rhodophyta) and its anticoagulant activity
255
Preparation of a luminescent zinc(II) coordination polymer and its encapsulation in the nanoporous channels
256
Preparation of a magnesium hydroxy carbonate from magnesium hydroxide
257
Preparation of a Major Metabolite of Iguratimod and Simultaneous Assay of Iguratimod and Its Metabolite by HPLC in Rat Plasma
258
Preparation of a mercaptopropyl bonded silica intermediate in supercritical carbon dioxide: Synthesis, characterisation and chromatography of a quinine based chiral stationary phase
259
Preparation of a mesoporous carbon membrane from resorcinol and formaldehyde
260
Preparation of a Mesoporous Ceramic Adsorbent Based on Iranian Domestic Kaolin to Utilize as Slow-Release Urea Fertilizer Medium
261
Preparation of a mesoporous silicon boron nitride via a non-aqueous sol–gel route
262
Preparation of a methyl 3,4-dideoxy-3-C-nitro-α-d-threo-hex-3-enopyranoside bearing a peroxy function at C-2 and its reactions with some nucleophiles
263
Preparation of a microalgal photoanode for hydrogen production by photo-bioelectrochemical water-splitting
264
Preparation of a Microbial Time-temperature Indicator by Using the Vegetative Form of Bacillus amyloliquefaciens for Monitoring the Quality of Chilled Food Products
265
Preparation of a mixed stir bar for sorptive extraction based on monolithic material for the extraction of quinolones from wastewater
266
Preparation of a mixed-mode hydrophilic interaction/anion-exchange polymeric monolithic stationary phase for capillary liquid chromatography of polar analytes
267
Preparation of a model Ziegler-Natta catalyst Surface science studies of magnesium chloride thin film deposited on gold and its interaction with titanium chloride
268
Preparation of a MOF membrane with 3-aminopropyltriethoxysilane as covalent linker for xylene isomers separation
269
Preparation of a molecularly imprinted polymer for the solid-phase extraction of scopolamine with hyoscyamine as a dummy template molecule
270
Preparation of a multifunctional material with superhydrophobicity, superparamagnetism, mechanical stability and acids–bases resistance by electrospinning
271
Preparation of a multifunctional mulberry silk fabric having hydrophobic and hydrophilic surfaces using VUV excimer lamp
272
Preparation of a multi-hapten antigen and broad specificity polyclonal antibodies for a multiple pesticide immunoassay
273
Preparation of a multi-hapten antigen and broad specificity polyclonal antibodies for a multiple pesticide immunoassay Original Research Article
274
Preparation of a multilayered composite catalyst for Fischer–Tropsch synthesis in a micro-chamber reactor Original Research Article
275
Preparation of a multi-membrane module for high-temperature hydrogen separation Original Research Article
276
Preparation of a Nafion–Teflon bimembrane-supported palladium catalyst and its use in the Heck reaction
277
Preparation of a Nanocrystalline TiO2 Photocatalyst Using a Dry-process with Acetylene Black
278
Preparation of a Nanoemulsion of Essential Oil of Acroptilon repens Plant and Evaluation of its Larvicidal Activity Agianst Malaria Vector, Anopheles stephensi
279
Preparation of a nanopatterned surface of bonded silicon wafers using electrochemical thinning and chemical etching: A scanning tunnel microscopy investigation
280
Preparation of a nano-scale ceramic membrane and its application in the medium-pressure boiler with phosphate treatment Original Research Article
281
Preparation of a nano-sized α-Al2O3 powder from a supersaturated sodium aluminate solution
282
Preparation of a nanostructured composite of titanium dioxide and polythiophene: a new route towards 3D heterojunction solar cells
283
Preparation of a new 1,3-alternate-calix[4]arene-bonded HPLC stationary phase for the separation of phenols, aromatic amines and drugs
284
Preparation of a new 16-MC-4 structure type that captures Mn(II) in the central cavity
285
Preparation of a new adsorbent from activated carbon and carbon nanofiber (AC/CNF) for manufacturing organic-vacbpour respirator cartridge
286
Preparation of a new C18 stationary phase containing embedded urea groups for use in high-performance liquid chromatography
287
Preparation of a new Cd(II)-imprinted polymer and its application to determination of cadmium(II) via flow-injection-flame atomic absorption spectrometry
288
Preparation of a new ceramic microfiltration membrane from mineral coal fly ash: Application to the treatment of the textile dying effluents
289
Preparation of a new chiral acridino-18-crown-6 ether-based stationary phase for enantioseparation of racemic protonated primary aralkyl amines
290
Preparation of a new chitosan-based material and its application for mercury sorption
291
Preparation of a new chromogenic substrate to assay for β-galactanases that hydrolyse type II arabino-3,6-galactans Original Research Article
292
Preparation of a New Class of Inner Salts by Formal Addition of Tosyl Nitrene to the Sulfur Atonr of Inner Salts, (alfa)-Carbeniodithiocarboxylates
293
Preparation of a new composite consisted of titanate nanotubes and porphyrin oligomer by a capillary filling
294
Preparation of a new conducting and magnetic material based on coordination compounds
295
Preparation of a new conducting langmuir-blodgett films based on oxygen substituted ttf derivative
296
Preparation of a new core–shell Ag@SiO2 nanocomposite and its application for fluorescence enhancement
297
Preparation of a new crown ether-based chiral stationary phase containing thioester linkage for the liquid chromatographic separation of enantiomers
298
Preparation of a new doubly tethered chiral stationary phase based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid and its application
299
Preparation of a new electrochemical sensor based on iron (III) complexes modified carbon paste electrode for simultaneous determination of mefenamic acid and indomethacin
300
Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1
301
Preparation of a new hydrophilic copolymer from a polylactone and the structure analyses
302
Preparation of a new hydrophilic copolymer from a polylactone and the structure analyses
303
Preparation of a new lightly cross-linked liquid crystalline polyamide by interfacial polymerization. Application to the obtainment of microcapsules with photo-triggered release
304
Preparation of a new lignosulfonate-based thinner: introduction of ferrous ions
305
Preparation of a New Magnetic Nanocomposite for the Removal of Dye Pollutions from Aqueous Solutions: Synthesis and Characterization
306
Preparation of a new nanocomposite of conducting polyaniline into layered MnPS3
307
Preparation of a new nanocomposite of conducting polyaniline into layered MnPS3
308
Preparation of a new nanoconductive ROMP copolymer and its application as solid polymer electrolyte
309
Preparation of a new pepper: chemoenzymatic synthesis of capsaicin oligosaccharide and 8-nordihydrocapsaicin oligosaccharide
310
Preparation of a New Photodegradable Copolymer LB Film and Its Application to Photopatterning
311
Preparation of a new poly(p-phenylene) type polymer, poly(pyrazine-2,5-diyl), with a coplanar structure
312
Preparation of a new polymeric antioxidant for polypropylene based on phenylmalonic acid
313
Preparation of a new polymeric ionic liquid-based monolith for stir cake sorptive extraction and its application in the extraction of inorganic anions
314
Preparation of a new pyrochlore-type compound Na0.32Bi1.68Ti2O6.46(OH)0.44 by hydrothermal reaction
315
Preparation of a new receptor for anions, macrocyclic polythiolactam—structure and high anion-binding ability
316
Preparation of a new ruthenium(II) building block for the synthesis of mixed-metal complexes
317
Preparation of a new solid state fluoride ion selective electrode and application
318
Preparation of a new sorbent based on boronate affinity monolith and evaluation of its extraction performance for nitrogen-containing pollutants
319
Preparation of a new thermal regulating fiber based on PVA and paraffin
320
Preparation of a new Ti catalyst for improved performance of NaAlH4
321
Preparation of a new type of homochiral l-proline derived cyclam and their nickel(II) complexes
322
Preparation of a new vanadium-chromium oxide with a two-dimensional structure
323
Preparation of a nickel–metal hydride (Ni–MH) rechargeable battery and its application to a solar vehicle
324
Preparation of a nonleaching, recoverable and recyclable palladium-complex catalyst for Heck coupling reactions by immobilization on Au nanoparticles
325
Preparation of a novel 16-DPA-P2S5 adduct and its application as a masked α,β-unsaturated ketone in [4+2]cycloaddition reactions
326
Preparation of a novel antifouling mixed matrix PES membrane by embedding graphene oxide nanoplates
327
Preparation of a novel Bi2MoO6 flake-like nanophotocatalyst by molten salt method and evaluation for photocatalytic decomposition of rhodamine B
328
Preparation of a novel bimodal catalytic membrane reactor and its application to ammonia decomposition for COx-free hydrogen production
329
Preparation of a novel BN/SiC composite porous structure
330
Preparation of a novel carbon-based solid acid from cassava stillage residue and its use for the esterification of free fatty acids in waste cooking oil
331
Preparation of a novel catalyst UDCaT-5: enhancement in activity of acid-treated zirconia—effect of treatment with chlorosulfonic acid vis-à-vis sulfuric acid
332
Preparation of a novel class of macrocycle and cryptand containing the 1,1′-disubstituted ferrocene unit
333
Preparation of a novel clay/metal complex hybrid film and its catalytic oxidation to chiral 1,1′-binaphthol
334
Preparation of a novel composite micro-porous polymer electrolyte membrane for high performance Li-ion battery
335
Preparation of a novel composition-gradient thermosensitive gel
336
Preparation of a novel conducting polymer by electropolymerization of thiophenylidine 8-naphthylamine Schiff-base
337
Preparation of a novel dual-function strong cation exchange/hydrophobic interaction chromatography stationary phase for protein separation
338
Preparation of a novel floating ring capsule-type dosage form for stomach specific delivery
339
Preparation of a novel floating ring capsule-type dosage form for stomach specific delivery
340
Preparation of a novel fluorescence probe based on covalent immobilization by emulsion polymerization and its application to the determination of metronidazole Original Research Article
341
Preparation of a novel fluorescence probe of terbium–europium co-luminescence composite nanoparticles and its application in the determination of proteins
342
Preparation of a novel group of hybrid compounds N-benzyl aminoboronbenzylphosphonic and N,N′-ethylenedi(aminoboronbenzylphosphonic) acids
343
Preparation of a novel hybrid organic–inorganic monolith for the separation of lysozyme by high performance liquid chromatography
344
Preparation of a novel hyperbranched carbosilane–silica hybrid coating for trace amount detection by solid phase microextraction/gas chromatography
345
Preparation of a novel infrared low-emissive coating from the Cu powder modified by the polyethylene wax
346
Preparation of a novel light-sensitive copolymer and its application in recycling aqueous two-phase systems
347
Preparation of a Novel Magnetic Nanocomposite Hydrogel Based on Carboxymethyl Chitosan for the Adsorption of Crystal Violet as Cationic Dye
348
Preparation of a novel molecularly imprinted polymer by the sol–gel process for sensing creatinine Original Research Article
349
Preparation of a novel Ni/Co-based alloy gradient coating on surface of the crystallizer copper alloy by laser
350
Preparation of a novel optical sensor for low pH values using agarose membranes as support
351
Preparation of a novel organic derivative of the layered perovskite bearing HLaNb2O7·nH2O interlayer surface trifluoroacetate groups
352
Preparation of a novel Pd/layered double hydroxide composite membrane for hydrogen filtration and characterization by thermal cycling
353
Preparation of a novel PEG composite with halogen-free flame retardant supporting matrix for thermal energy storage application
354
Preparation of a novel pH-responsive silver nanoparticle/poly(HEMA–PEGMA–MAA) composite hydrogel
355
Preparation of a novel polystyrene-based urea resin
356
Preparation of a novel polysulfone/polyethylene oxide/silicone rubber multilayer composite membrane for hydrogen–nitrogen separation
357
Preparation of a novel porous poly (trimethylol propane triacrylate-co-ethylene dimethacrylate) monolithic column for highly efficient HPLC separations of small molecules
358
Preparation of a novel potassium ion imprinted polymeric nanoparticles based on dicyclohexyl 18C6 for selective determination of K+ ion in different water samples
359
Preparation of a novel recyclable cocatalyst wool–Pd for enhancement of photocatalytic H2 evolution on CdS
360
Preparation of a novel solid acid catalyst with Lewis and Brønsted acid sites and its application in acetalization
361
Preparation of a novel solid base catalyst of CaO covered with SiO2
362
Preparation of a novel stable nitroxide based on [60]fulleropyrrolidine and its magnetic properties
363
Preparation of a novel structured catalyst based on aligned carbon nanotube arrays for a microchannel Fischer-Tropsch synthesis reactor
364
Preparation of a novel sulfated glycopeptide complex and inhibiting L1210 cell lines property in vitro
365
Preparation of a novel sulfated glycopeptide complex and inhibiting L1210 cell lines property in vitro
366
Preparation of a Novel Super Active Fischer-Tropsch Cobalt Catalyst Supported on Carbon Nanotubes
367
Preparation of a novel uranyl-o-sulfamidobenzoate complex: its crystal and molecular structure at 150 K
368
Preparation of a novel, camphor-derived sulfide and its evaluation as a chiral auxiliary mediator in asymmetric epoxidation via the Corey–Chaykovsky reaction
369
Preparation of a pcDNA3 Plasmid for Hemagglutinin- Neuraminidase Gene of Human Respirovirus 3 (HPIV-3)
370
Preparation of a Pd composite membrane via an organic-inorganic activation method in the electroless plating technique
371
Preparation of a Pd membrane on a WO3 modified Porous Stainless Steel for hydrogen separation
372
Preparation of a perovskite La0.2Sr0.8CoO3–x membrane on a porous MgO substrate
373
Preparation of a phosphopolyoxomolybdate P2Mo18O626− doped polypyrrole modified electrode and its catalytic properties
374
Preparation of a photocatalytic TiO2/ZnTiO3 coating on glazed ceramic tiles
375
Preparation of a photoresponsive molecularly imprinted polymer containing fluorine-substituted azobenzene chromophores
376
Preparation of a photoresponsive molecularly imprinted polymer containing fluorine-substituted azobenzene chromophores
377
Preparation of a pH-sensitive polyacrylate amphiphilic copolymer and its application in cellulase immobilization
378
Preparation of a pinhole-free Pd–Ag membrane on a porous metal support for pure hydrogen separation
379
Preparation of a plate-like C/C composite membrane for gas separation
380
Preparation of a Platinum and Palladium/Polyimide Nanocomposite Film as a Precursor of Metal-Doped Carbon Molecular Sieve Membrane via Supercritical Impregnation
381
Preparation of a platinum layer-modified aluminum electrode by electrochemical and electroless cementations and its use for the electrooxidation of methanol
382
Preparation of a polar monolithic coating for stir bar sorptive extraction of emerging contaminants from wastewaters
383
Preparation of a polar monolithic stir bar based on methacrylic acid and divinylbenzene for the sorptive extraction of polar pharmaceuticals from complex water samples
384
Preparation of a poly(methyl methacrylate)-reduced graphene oxide composite with enhanced properties by a solution blending method
385
Preparation of a polyacrylonitrile/multi-walled carbon nanotubes composite by surface-initiated atom transfer radical polymerization on a stainless steel wire for solid-phase microextraction
386
Preparation of a poly-alkylamine surface-functionalized carbon with excellent performance as a Pd(II) scavenger
387
Preparation of a polybutadiene stationary phase immobilized by γ radiation for reversed-phase high-performance liquid chromatography
388
Preparation of a polydimethylsiloxane (PDMS)/CaCO3 based superhydrophobic coating
389
Preparation of a polyhedral oligomeric silsesquioxane-based perfluorinated monolithic column
390
Preparation of a polymer-based conductive film filled with single-walled carbon nanotubes
391
Preparation of a polymeric ionic liquid-coated solid-phase microextraction fiber by surface radical chain-transfer polymerization with stainless steel wire as support
392
Preparation of a polymethoxyflavone-rich fraction (PRF) of Citrus sunki Hort. ex Tanaka and its antiproliferative effects
393
Preparation of a polysaccharide–polyester diblock copolymer and its micellar characteristics
394
Preparation of a polyurethane scaffold for tissue engineering made by a combination of salt leaching and freeze-drying of dioxane
395
Preparation of a porous carbon from ferrocene-loaded polyaniline and its use in hydrogen adsorption
396
Preparation of a porous ITO electrode
397
Preparation of a porous nanocrystalline TiO2 layer by deposition of hydrothermally synthesized nanoparticles
398
Preparation of a potentiometric immobilized urease electrode and urea determination in serum
399
Preparation of a protected phosphoramidon precursor via an H-Phosphonate coupling strategy
400
Preparation of a protein micro-array using a photo-reactive polymer for a cell-adhesion assay
401
Preparation of a Pt/SiO2 Catalyst: I. Interaction between Platinum Tetrammine Hydroxide and the Silica Surface
402
Preparation of a Pt/SiO2 catalyst: II. Temperature-programmed decomposition of the adsorbed platinum tetrammine hydroxide complex under flowing hydrogen, oxygen, and argon
403
Preparation of a PVdF-HFP/polyethylene composite gel electrolyte with shutdown function for lithium-ion secondary battery
404
Preparation of a radioactive 44Ti target
405
Preparation of a radioactive 44Ti target
406
Preparation of a reference fallout material for activity measurements
407
Preparation of a reference mussel tissue material for polycyclic aromatic hydrocarbons and trace metals determination Original Research Article
408
Preparation of a reservoir type levonorgestrel delivery system using high molecular weight poly L-lactide
409
Preparation of a resin-bound cyclic malonic ester and a facile solid-phase synthesis of 4(1H)quinolones
410
Preparation of a reticulated ceramic using vegetal sponge as templating
411
Preparation of a rice bran enzymatic extract with potential use as functional food
412
Preparation of a robust biocatalyst of d-amino acid oxidase on sepabeads supports using the glutaraldehyde crosslinking method
413
Preparation of a Selective L-Phenylalanine Imprinted Polymer Implicated in Patients with Phenylketonuria
414
Preparation of a selective receptor for carbofuran for the development of a simple optical spot test for its rapid detection using stabilized in air lipid films with incorporated receptor Original Research Article
415
Preparation of a self-assembled cytochrome c monolayer on a gold substrate for biomolecular device architecture
416
Preparation of a semiconductive compound obtained by the pyrolysis of urea under N2 and the photocatalytic property under visible light irradiation
417
Preparation of a sensor device with specific recognition sites for acetaldehyde by molecular imprinting technique
418
Preparation of a series of 5-methyl-3-(substituted)-[1,2,4]triazines
419
Preparation of a series of chitooligomers and their effect on hepatocytes
420
Preparation of a series of chitooligomers and their effect on hepatocytes
421
Preparation of a series of group XIII metal–quinolate complexes in natural and synthetic smectites
422
Preparation of a series of novel fluorophores, N-substituted 6-amino and 6,6″-diamino-2,2′:6′,2″-terpyridine by palladium-catalyzed amination
423
Preparation of a series of photoinitiators and their use in the thermal curing of epoxide and radical polymerization of acrylate
424
Preparation of a SERS substrate using vacuum-synthesized silver nanoparticles
425
Preparation of a set of 4,5-dihydro-3H-pyrrolo[3,2-d]pyrimidin-4-ones as potential Hsp90 ligands
426
Preparation of a Si(1 1 1):GaSe van der Waals surface termination by selenization of a monolayer Ga on Si(1 1 1)
427
Preparation of a silicate membrane at a liquid|liquid interface and its doping with a platinum ion
428
Preparation of a single phase sample of (Bi1−xCux)Sr2YCu2Oy and its physical properties
429
Preparation of a single phase sample of (Bi1−xCux)Sr2YCu2Oy and its physical properties
430
Preparation of a soil reference material for the determination of radionuclides
431
Preparation of a soil reference material for the determination of radionuclides Original Research Article
432
Preparation of a soluble and neutral alkyl derivative of poly(3,4-ethylene-dioxythiophene) and its optical properties
433
Preparation of a Soluble Precursor by an Aminolysis Reaction of Zr(NEt2)4 and Its Pyrolytic Conversion into ZrN
434
Preparation of a soluble solid sample by a continuous ultrasound assisted dissolution system for the flow-injection atomic absorption spectrometric determination of iron in milk powder and infant formula
435
Preparation of a specific monoclonal antibody against 2′-deoxycytidine
436
Preparation of a spinel Li4Ti5O12 (1 1 1) surface from a rutile TiO2 single crystal
437
Preparation of a stable disilane amidinium heterocycle and attempted syntheses of an inorganic N-heterocyclic carbene
438
Preparation of a stable double emulsion (W1/O/W2): role of the interfacial films on the stability of the system
439
Preparation of a stable silica membrane by a counter diffusion chemical vapor deposition method
440
Preparation of a strong-cation exchange monolith by a novel method and its application in the separation of IgG on high performance liquid chromatography
441
Preparation of a sulfated linear (1->4)-beta-D-galactan with variable degrees of sulfation
442
Preparation of a sulfonated fused-silica capillary and its application in capillary electrophoresis and electrochromatography
443
Preparation of a sulfoxide group and ammonium-salt bonded silica stationary phase for separation of polychlorinated biphenyls from mineral oils
444
Preparation of a super-hydrophobic poly(vinyl chloride) surface via solvent–nonsolvent coating
445
Preparation of a supramolecular heterocyclic host complex using chiral (1R,2S)-2-amino-1,2-diphenylethanol
446
Preparation of a SWCNT–DNA modified electrode and its electrochemical detection property
447
Preparation of a Synthetic Titanite Glass Calibration Material for In Situ Microanalysis by Direct Fusion in Graphite Electrodes: A Preliminary Characterisation by EPMA and LA-ICP-MS
448
Preparation of a thermal insulating material using electrophoretic deposition of silica particles
449
Preparation of a thermosensitive and biodegradable microgel via polymerization of macromonomers based on diacrylated Pluronic/oligoester copolymers
450
Preparation of a TiB2 composite with a nickel matrix by pulse plasma sintering with combustion synthesis
451
Preparation of a TiMEMO nanocomposite by the sol–gel method and its application in coloured thickness insensitive spectrally selective (TISS) coatings
452
Preparation of a TiO2 nanoparticle-deposited capillary column by liquid phase deposition and its application in phosphopeptide analysis
453
Preparation of a titanium carbide coating on carbon fibre using a molten salt method Original Research Article
454
Preparation of a titanium dioxide photocatalyst codoped with cerium and iodine and its performance in the degradation of oxalic acid Original Research Article
455
Preparation of a Topical Product from Allium sativum Retrieved from Iranian Traditional Medicine
456
Preparation of a Traditional Poly Herbal Gel for Abnormal Vaginal Discharge
457
Preparation of a tritiated ginkgolide
458
Preparation of a UV-absorbed Transparent Monolithic Titanium Oxide Gel by the Catalytic Sol-Gel Process with a Phenanthroline Hydrochloride Catalyst
459
Preparation of a UV-attenuating agent using a mechanochemical reaction
460
Preparation of a water-dispersible carbon nanotube–silica hybrid
461
Preparation of a water-dispersible carbon–silica composite derived from a silylated molecular precursor
462
Preparation of a water-soluble fluorinated zinc phthalocyanine and its effect for photodynamic therapy
463
Preparation of a wave packet through a mixed level in Li2; predissociation of one member of the superposition
464
Preparation of a well ordered iron oxide on Cu(1 1 0)
465
Preparation of a well-ordered layered nanocomposite from zinc–aluminum–chloride layered double hydroxide and hydrogenophosphate by ion exchange
466
Preparation of a working electrode with a conducting PEDOT:PSS film and its applications in a dye-sensitized solar cell
467
Preparation of a β-cyclodextrin functionalized monolith via a novel and simple one-pot approach and application to enantioseparations
468
Preparation of A1/A1N cermet film by co-sputtering; structural aspects and optical properties
469
Preparation of a–b plane oriented Nb-doped Bi4Ti3O12 ceramics by magnetic alignment via gelcasting
470
Preparation of ABi2O6 (A = Mg, Zn) with the trirutile-type structure
471
Preparation of ABS/montmorillonite nanocomposite using a solvent/non-solvent method
472
Preparation of a-C:H/a-C:H:Si:O and a-C:H/a-C:H:Si multilayer coatings by PACVD
473
Preparation of Acetylated Distarch Adipates by Extrusion
474
Preparation of Acetylated Guar Gum – Unsaturated Polyester Composites & Effect of Water on Their Properties
475
Preparation of acetylated pyranoid glycals from glycosyl halides by chromium(II) complexes under aqueous biphasic conditions
476
Preparation of acetylcellulose/silica composites by sol-gel method and their mechanical properties
477
Preparation of acid–base bifunctional core–shell structured Fe3O4@SiO2 nanoparticles and their cooperative catalytic activity
478
Preparation of acidic and alkaline macrocapsules for pH control Original Research Article
479
Preparation of acid-resistant core/shell Fe3O4@C materials and their use as catalyst supports Original Research Article
480
Preparation of acid-resistant heavy fluorous tags for recycling in synthetic systems
481
Preparation of acridine orange-doped silica nanoparticles for pH measurement
482
Preparation of Acridine Orange-MWCNT Modified Electrode for Voltammetric Detection of Dopamine in the Presence of Ascorbic Acid
483
Preparation of acrylate polymer/silica nanocomposite particles with high silica encapsulation efficiency via miniemulsion polymerization
484
Preparation of acrylic anodic electrophoretic resin/clay nanocomposite films by water-based electrodeposition
485
Preparation of acrylic bone cements for vertebroplasty with bismuth salicylate as radiopaque agent
486
Preparation of acrylic grafted chitin for wound dressing application
487
Preparation of acrylic-type derivative of ibuprofen and in vitro evaluation studies of its polymeric prodrugs
488
Preparation of actinide targets by molecular plating for coulomb excitation studies at ATLAS
489
Preparation of actinide targets by molecular plating for coulomb excitation studies at ATLAS
490
Preparation of actinide targets by radio-frequency sputtering
491
Preparation of activated carbon "membranes" by physical and chemical actication of cork
492
Preparation of activated carbon by chemical activation using Z. Spina-Christi fruits nuclei as raw material
493
Preparation of activated carbon by microwave heating of langsat (Lansium domesticum) empty fruit bunch waste
494
Preparation of activated carbon cloth from viscous rayon: Part IV. Chemical activation Original Research Article
495
Preparation of activated carbon cloths from viscous rayon. Part I. Carbonization procedures Original Research Article
496
Preparation of activated carbon cloths from viscous rayon. Part II: physical activation processes Original Research Article
497
Preparation of activated carbon cloths from viscous rayon: Part III. Effect of carbonization on CO2 activation Original Research Article
498
Preparation of activated carbon fibers from polyvinyl chloride Original Research Article
499
Preparation of activated carbon fibres from acrylic textile fibres Original Research Article
500
Preparation of activated carbon for mercury capture from chicken waste and coal
501
Preparation of Activated Carbon from a Petrochemical Industrial Waste by NaOH Activation under Microwave Radiation, Application in Dyes Adsorption
502
Preparation of activated carbon from a renewable bio-plant of Euphorbia rigida by H2SO4 activation and its adsorption behavior in aqueous solutions
503
Preparation of activated carbon from agricultural wastes (almond shell and orange peel) for adsorption of 2-pic from aqueous solution
504
Preparation of activated carbon from asphalt and heavy oil fly ash and coal fly ash by pyrolysis
505
Preparation of activated carbon from autohydrolysed mixed southern hardwood
506
Preparation of activated carbon from autohydrolysed mixed southern hardwood
507
Preparation of activated carbon from bituminous coal with phosphoric acid activation Original Research Article
508
Preparation of activated carbon from cherry stones by physical activation in air. Influence of the chemical carbonisation with H2SO4
509
Preparation of activated carbon from cherry stones by physical activation in air. Influence of the chemical carbonisation with H2SO4
510
Preparation of activated carbon from cherry stones by chemical activation with ZnCl2
511
Preparation of Activated Carbon from Corn Stalks by Dehydration Method as Supercapacitor Electrode Material
512
Preparation of activated carbon from date pits: Effect of the activation agent and liquid phase oxidation
513
Preparation of activated carbon from date pits: Effect of the activation agent and liquid phase oxidation
514
Preparation of activated carbon from date sphate using microwave irradiation and investigation of its capability for removal of dye pollutant from aqueous media
515
Preparation of activated carbon from date sphate using microwave irradiation and investigation of its capability for removal of dye pollutant from aqueous media
516
Preparation of activated carbon from edible fungi residue by microwave assisted K2CO3 activation—Application in reactive black 5 adsorption from aqueous solution
517
Preparation of Activated Carbon from Entada Africana Guill. Perr for CO2 Capture: Artificial Neural Network and Isotherm Modeling
518
Preparation of activated carbon from Enteromorpha prolifera and its use on cationic red X-GRL removal
519
Preparation of activated carbon from forest and agricultural residues through CO2 activation
520
Preparation of activated carbon from Jatropha hull with microwave heating: Optimization using response surface methodology
521
Preparation of activated carbon from lignin by chemical activation Original Research Article
522
Preparation of activated carbon from petroleum coke by KOH chemical activation for adsorption heat pump
523
Preparation of activated carbon from phenolic resin by KOH chemical activation under microwave heating Original Research Article
524
Preparation of activated carbon from polyester floss and its application to the adsorptive removal of 4-nonylphenol in water
525
Preparation of activated carbon from sorghum pith and its structural and electrochemical properties
526
Preparation of activated carbon from sugarcane bagasse by microwave assisted activation for the remediation of semi-aerobic landfill leachate
527
Preparation of activated carbon from wood monolith
528
Preparation of activated carbon having the structure derived from biomass by alkali activation with NaOH, and its application in electric double-layer capacitors
529
Preparation of activated carbon hollow fibers from ramie at low temperature for electric double-layer capacitor applications
530
Preparation of activated carbon honeycomb monolith directly from coal
531
Preparation of activated carbon microspheres from phenolic resin with metal compounds by sub- and supercritical water activation
532
Preparation of activated carbon microspheres from phenolic resin with metal compounds by sub- and supercritical water activation
533
Preparation of activated carbon microspheres from phenolic-resin by supercritical water activation Original Research Article
534
Preparation of activated carbon nanotubes
535
Preparation of activated carbon supported Fe–Al2O3 catalyst and its application for hydrogen production by catalytic methane decomposition
536
Preparation of activated carbon supported Pt catalysts and optimization of their catalytic activities for hydrogen gas production from the hydrothermal treatment of biomass-derived compounds
537
Preparation of activated carbon using low temperature carbonisation and physical activation of high ash raw bagasse for acid dye adsorption
538
Preparation of activated carbon with high surface area using crab shell and shochu waste and the development of methane storage technology
539
Preparation of activated carbon with highly developed mesoporous structure from Camellia oleifera shell through water vapor gasification and phosphoric acid modification
540
Preparation of activated carbon-metal oxide hybrid catalysts: textural characterization
541
Preparation of activated carbons by microwave heating KOH activation
542
Preparation of activated carbons by ZnCl2 activation from herb residues under vacuum
543
Preparation of activated carbons derived from KOH-impregnated resin
544
Preparation of activated carbons from bituminous coal pitches
545
Preparation of activated carbons from bituminous coals with CO2 activation—Influence of coal oxidation Original Research Article
546
Preparation of activated carbons from cattle-manure compost by zinc chloride activation
547
Preparation of activated carbons from cherry stones by activation with potassium hydroxide
548
Preparation of activated carbons from cocoa shells and siriguela seeds using H3PO4 and ZnCL2 as activating agents for BSA and α-lactalbumin adsorption
549
Preparation of activated carbons from cork waste by chemical activation with KOH
550
Preparation of activated carbons from corn cob catalyzed by potassium salts and subsequent gasification with CO2
551
Preparation of activated carbons from heavy-oil fly ashes
552
Preparation of activated carbons from oil-palm-stone chars by microwave-induced carbon dioxide activation Original Research Article
553
Preparation of activated carbons from olive-tree wood revisited. I. Chemical activation with H3PO4
554
Preparation of activated carbons from olive-tree wood revisited. II. Physical activation with air
555
Preparation of activated carbons from seeds of Mucuna mutisiana by physical activation with steam
556
Preparation of activated carbons from seeds of Mucuna mutisiana by physical activation with steam
557
Preparation of activated carbons from Spanish anthracite: I. Activation by KOH Original Research Article
558
Preparation of activated carbons from Spanish anthracite: II. Activation by NaOH Original Research Article
559
Preparation of activated carbons from used tyres by gasification with steam and carbon dioxide
560
Preparation of activated carbons from Zonguldak region coals by physical and chemical activations for hydrogen sorption
561
Preparation of activated carbons previously treated with hydrogen peroxide: Study of their porous texture
562
Preparation of activated carbons previously treated with sulfuric acid A study of their adsorption capacity in solution
563
Preparation of activated carbon–sepiolite pellets
564
Preparation of activated carbon-supported ferrite for absorbent of hydrogen sulfide at a low temperature
565
Preparation of activated graphene and effect of activation parameters on electrochemical capacitance Original Research Article
566
Preparation of activated mesocarbon microbeads with high mesopore content
567
Preparation of activated rectangular polyaniline-based carbon tubes and their application in hydrogen adsorption
568
Preparation of active antibacterial LDPE surface through multistep physicochemical approach II: Graft type effect on antibacterial properties
569
Preparation of active antibacterial LDPE surface through multistep physicochemical approach: I. Allylamine grafting, attachment of antibacterial agent and antibacterial activity assessment
570
Preparation of active esters on solid support for aqueous-phase peptide couplings
571
Preparation of active HDS catalysts by controlling the dispersion of active species
572
Preparation of acyclo nucleoside phosphonate analogues based on cross-metathesis
573
Preparation of acyl fluorides with hydrogen fluoride-pyridine and 1,3-dicyclohexylcarbodiimide
574
Preparation of Adsorbents Containing CdS Quantum Dots from the Orange Peel for the Sewage Treatment
575
Preparation of adsorbents from sugarcane manufacturing by-product filter-mud by thermal activation
576
Preparation of advanced intermediates for the synthesis of both methyllycaconitine and racemulsonine via a common intermediate
577
Preparation of aerogel beryllium borate with supercritical carbon dioxide drying
578
Preparation of Ag nanoparticle dispersed silk fibroin compact
579
Preparation of Ag nanoparticle loaded mesoporous γ-alumina catalyst and its catalytic activity for reduction of 4-nitrophenol
580
Preparation of Ag nanoparticles coated tetrapod-like ZnO whisker photocatalysts using photoreduction
581
Preparation of Ag nanoparticles with triethanolamine as reducing agent and their antibacterial property
582
Preparation of Ag nanorods with high yield by polyol process
583
Preparation of Ag(I) and Cu(II) exchanged α-zirconium phosphate by using molten nitrate salts and their electric characterization
584
Preparation of Ag/AgCl/BiMg2VO6 composite and its visible-light photocatalytic activity
585
Preparation of Ag/Au/Pt nanoparticles and their catalytic properties
586
Preparation of Ag/C catalysts for the O2 electrode by the Ag(I) SCRM
587
Preparation of Ag/NaA zeolite modified carbon paste electrode as a DNA biosensor
588
Preparation of Ag/SiO2 powder with light color and antibacterial performance
589
Preparation of Ag/ZnMgO nanocomposites as novel highly efficient photocatalysts by one-pot method under microwave irradiation
590
Preparation of Ag2S Nanoparticles and using as Catalyst for the A3-coupling (Aldehyde-Amine-Alkyne) Reaction
591
Preparation of Ag2S–Graphene nanocomposite from a single source precursor and its surface-enhanced Raman scattering and photoluminescent activity
592
Preparation of AgBr Nanoparticles in Microemulsions Via Reaction of AgNO3 with CTAB Counterion
593
Preparation of AgBr@SiO2 core@shell hybrid nanoparticles and their bactericidal activity
594
Preparation of Ag-doped mesoporous titania and its enhanced photocatalytic activity under UV light irradiation Original Research Article
595
Preparation of Ag-doped TiO2 nanoparticles by a miniemulsion method and their photoactivity in visible light illuminations
596
Preparation of agglomerated crystals for improving flowability and compactibility of poorly flowable and compactible drugs and excipients
597
Preparation of agglomerated particles of TiO2 and silica-coated magnetic particle
598
Preparation of AgInS2 chalcopyrite thin films by chemical spray pyrolysis
599
Preparation of AgInS2 nanoparticles by a facile microwave heating technique; study of effective parameters, optical and photovoltaic characteristics
600
Preparation of Ag-modified Zn2GeO4 nanorods for photo-degradation of organic pollutants
601
Preparation of agricultural by-product based anion exchanger and its utilization for nitrate and phosphate removal
602
Preparation of agricultural residue anion exchangers and its nitrate maximum adsorption capacity
603
Preparation of airborne particulate standards on PTFE-membrane filter for laser ablation inductively coupled plasma mass spectrometry Original Research Article
604
Preparation of air-settled, roll-thinned phosphorus targets
605
Preparation of air-settled, roll-thinned phosphorus targets
606
Preparation of air-stable and highly conductive potassium-intercalated graphite sheet Original Research Article
607
Preparation of Al, Ti, Zr-perfluoroheptanoate compounds and their use in ring opening polymerization Original Research Article
608
Preparation of Al/TiO2 nanometer photo-catalyst film and the effect of H2O addition on photo-catalytic performance for benzene removal Original Research Article
609
Preparation of Al2O3 and Al2O3–ZrO2 ceramic foams with adjustable cell structure by centrifugal slip casting
610
Preparation of Al2O3 carriers in an integrated mini pilot unit
611
Preparation of Al2O3 thin films on stainless steel by electrochemical deposition
612
Preparation of Al2O3/DLC/Au/MoS2 chameleon coatings for space and ambient environments
613
Preparation of Al2O3–SiO2 fine particles by CVD method in tube flow reactor
614
Preparation of Al2O3–TiB2 nanocomposite powder by mechanochemical reaction between Al, B2O3 and Ti
615
Preparation of Al2O3–YSZ composite coating by EB-PVD
616
Preparation of Al2O3–YSZ composite coating by EB-PVD
617
Preparation of Al2O3–ZrO2 mixed supports; their characteristics and hydrothermal stability
618
Preparation of Al2O3–ZrO2 nanocomposite films by laser chemical vapour deposition
619
Preparation of Al2O3–ZrO2–Ni nanocomposite by pulse electric current and pressureless sintering
620
Preparation of AlCl3/silica gel catalyst for simultaneously removing thiophene and olefins from coking benzene by inclosed grafting method
621
Preparation of alcohols from sulfones and trialkylboranes
622
Preparation of Al–Cu pillared clay catalysts for the catalytic wet oxidation of reactive dyes
623
Preparation of Al–Cu–Fe thin films by vapor deposition technique from a single source
624
Preparation of Al-Cu-Fe ultra-thin quasicrystalline films without protective coatings by MBE: influence of processing
625
Preparation of aldehydic electrospun PAN mats for ammonia removal from wastewater
626
Preparation of Al-doped hydrogenated nanocrystalline cubic silicon carbide by VHF-PECVD for heterojunction emitter of n-type crystalline silicon solar cells
627
Preparation of Al-doped ZnO thin film deposited at room temperature
628
Preparation of AlFeSiV compounds local reinforced Al matrix composite by pressureless reactive infiltration technique
629
Preparation of alginate beads containing a prodrug of diethylenetriaminepentaacetic acid
630
Preparation of Alginate Gel Beads Containing Metformin Hydrochloride Using Emulsion- Gelation Method
631
Preparation of alginate microspheres by emulsification/internal gelation to encapsulate cocoa polyphenols
632
Preparation of alginate nanocapsules containing turmeric oil
633
Preparation of alginate nanocapsules containing turmeric oil
634
Preparation of alginate/chitosan/carboxymethyl chitosan complex microcapsules and application in Lactobacillus casei ATCC 393
635
Preparation of alginate/galactosylated chitosan scaffold for hepatocyte attachment
636
Preparation of alginate–chitosan hybrid gel beads and adsorption of divalent metal ions
637
Preparation of alginate-polymethacrylate hybrid material by radical polymerization of cationic methacrylate monomer in the presence of sodium alginate
638
Preparation of alginic acid layers on stainless-steel substrates for biomedical applications
639
Preparation of aligned carbon nanotubes by water vapor-assisted CVD
640
Preparation of aligned carbon nanotubes catalysed by laser-etched cobalt thin films
641
Preparation of aligned porous chitin nanowhisker foams by directional freeze–casting technique
642
Preparation of aligned porous gelatin scaffolds by unidirectional freeze-drying method
643
Preparation of Aligned Porous Ni-GDC Nano Composite by Freeze-Casting Process
644
Preparation of alinite based cement from incinerator ash
645
Preparation of alinite cement from municipal solid waste incineration fly ash
646
Preparation of aliphatic-hydrocarbon-based anion-exchange membranes and their anti-organic-fouling properties
647
Preparation of Aliquat 336-impregnated porous membrane
648
Preparation of alka-2,4-dienylsilanes and 3-cyclopropylprop-2-enylsilanes by the titanocene(II)-promoted reaction of 2,4-bis(phenylthio)but-3-enylsilanes
649
Preparation of alkali metal-graphite intercalation compounds in tetrahydrofuran type of solvents
650
Preparation of alkaline anion exchange membranes based on functional poly(ether-imide) polymers for potential fuel cell applications
651
Preparation of alkaline solid polymer electrolyte based on PVA–TiO2–KOH–H2O and its performance in Zn–Ni battery Original Research Article
652
Preparation of alkaline-earth metal silicates from gels and their NOx-adsorption behavior
653
Preparation of alkaline-earth titanates by accelerated solid-state reaction in water vapor atmosphere
654
Preparation of alkyl (R)-(−)-3-hydroxybutyrate by acidic alcoholysis of poly-(R)-(−)-3-hydroxybutyrate
655
Preparation of alkyl α- and β-d-glucopyranosides, thermotropic properties and X-ray analysis
656
Preparation of alkylation agents for bulged DNA microenvironments
657
Preparation of alkynylcyclopropanes by the titanocene(II)-promoted reaction of 1,1-bis(phenylthio)-2-alkynes with 1-alkenes
658
Preparation of all stereoisomers of 2-allyl-2-methyl-3-hydroxycyclopentanone by desymmetric processes based on a microbial oxidation and reduction system
659
Preparation of all-cellulose composite by selective dissolving of cellulose surface in PEG/NaOH aqueous solution
660
Preparation of all-cellulose composite by selective dissolving of cellulose surface in PEG/NaOH aqueous solution
661
Preparation of alloyed poly(ether block amide)/poly(ethylene glycol diacrylate) membranes for separation of CO2/H2 (syngas application)
662
Preparation of Al-MCM-41 materials and PS/Al-MCM-41 composite using supercritical carbon dioxide
663
Preparation of AlN ceramic bonded carbon by gelcasting and spark plasma sintering Original Research Article
664
Preparation of AlN matrix composites using an infiltration and reaction approach
665
Preparation of AlN polycrystalline plate from aluminum plate
666
Preparation of AlON ceramics via reactive spark plasma sintering
667
Preparation of AlON–TiC composites via reaction-bonding
668
Preparation of alpha alumina coating on carbide tools
669
Preparation of alpha-emitting nuclides by electrodeposition
670
Preparation of alpha-emitting nuclides by electrodeposition
671
Preparation of alpha-Hydroxy Ketones from Aromatic Aldehydes
672
Preparation of Alpha-spectrometric sources by coprecipitation with Fe(OH)3: Application to actinides
673
Preparation of alpha-spectrometric sources by co-precipitation with Fe(OH)3: application to uranium
674
Preparation of Al-pillared montmorillonite from concentrated dispersions
675
Preparation of AlPO4-5 nano-pore crystals: Effect of alteration in precursor gel preparation on the morphology of crystals
676
Preparation of AlPO4-5 nano-pore crystals: Effect of alteration in precursor gel preparation on the morphology of crystals
677
Preparation of AlRu intermetallic compounds by mechanical alloying
678
Preparation of Al–Ti–C–Sr master alloys and their refining efficiency on A356 alloy
679
Preparation of alumina by aqueous gelcasting
680
Preparation of alumina coatings on metallic nickel substrate using a room-temperature wet chemical pretreatment method
681
Preparation of alumina films by the sol-gel method
682
Preparation of alumina foams by the thermo-foaming of powder dispersions in molten sucrose
683
Preparation of alumina membrane from aluminium chloride
684
Preparation of alumina supported gold catalysts: Gold complexes genesis, identification and speciation by mass spectrometry Original Research Article
685
Preparation of alumina supported gold catalysts: Influence of washing procedures, mechanism of particles size growth Original Research Article
686
Preparation of alumina supported palladium–platinum catalysts by surface redox reactions. Activity for complete hydrocarbon oxidation Original Research Article
687
Preparation of alumina/silica core-shell abrasives and their CMP behavior
688
Preparation of alumina-coated magnetite nanoparticle for extraction of trimethoprim from environmental water samples based on mixed hemimicelles solid-phase extraction Original Research Article
689
Preparation of alumina-supported CuCo catalysts from cyanide complexes and their performance in CO hydrogenation Original Research Article
690
Preparation of alumina-supported LaFeO3 catalysts and their catalytic activity for propane combustion
691
Preparation of alumina-supported palladium catalysts for complete oxidation of methane Original Research Article
692
Preparation of alumina-supported Pd and LaMnO3 catalysts with the site-selective deposition and their catalytic activity for NO–CO reaction
693
Preparation of alumina–titania nanofibers by a pH-swing method
694
Preparation of aluminium boride by powder technology
695
Preparation of aluminium doped zinc oxide particles by chemical vapor deposition
696
Preparation of aluminium lanthanum oxyapatite tapes, La10AlSi5O26.5, by tape casting and reaction sintering
697
Preparation of aluminium–magnesium alloys and some valuable salts from used beverage cans
698
Preparation of aluminophosphate/polyethylene nanocomposite membranes and their gas permeation properties
699
Preparation of aluminum borate whiskers by the molten salt synthesis method
700
Preparation of aluminum foil-supported nano-sized ZnO thin films and its photocatalytic degradation to phenol under visible light irradiation
701
Preparation of aluminum nitride green sheets by aqueous tape casting
702
Preparation of aluminum oxide films by ion beam assisted deposition
703
Preparation of aluminum silicate, Ca12Al10Si4O35, using waste materials and its activity for combustion of hydrocarbons
704
Preparation of aluminum(III) (bis(amido)pyridine)(thiolate) complexes: Unexpected transmetalation mediated by LiAlH4
705
Preparation of aluminum/silicon carbide metal matrix composites using centrifugal atomization
706
Preparation of aluminum–organic nanocomposite materials via wet chemical process
707
Preparation of Amberlite IRN 77 Ion Exchange Resin Loaded with Magnetite Nanoparticles for Cr(III) Removal from Aqueous Solution
708
Preparation of Amberlyst-coated pervaporation membranes and their application in the esterification of acetic acid and butanol Original Research Article
709
Preparation of amidine derivatives from 1-cyano-d-galactal
710
Preparation of amidoxime-modified polyacrylonitrile (PAN-oxime) nanofibers and their applications to metal ions adsorption
711
Preparation of aminals in water
712
Preparation of aminated microfiltration membranes by degradable functionalization using plain PEI membranes with various morphologies
713
Preparation of amine-immobilized solid base catalysts by plasma polymerization of 1,2-diaminocyclohexane Original Research Article
714
Preparation of amine-modified multiwalled carbon nanotubes and their use in composites
715
Preparation of amino acid conjugates of betulinic acid with activity against human melanoma
716
Preparation of amino functionalized silica micro beads by dry method for supporting silver nanoparticles with antibacterial properties
717
Preparation of amino terminated polyamidoamine functionalized chitosan beads and its Cr(VI) uptake studies
718
Preparation of amino-functionalized silica for copper removal from an aqueous solution
719
Preparation of amino-functionalized silica in aqueous conditions
720
Preparation of aminofunctionalized TiO2 surfaces by binding of organophosphates
721
Preparation of amino-terminated monolayers via hydrolysis of phthalimide anchored to Si(1 1 1)
722
Preparation of Ammonium Chloroplatinate by a Precipitation Stripping of Pt(IV)-Loaded Alamine 336 or TBP
723
Preparation of Ammonium Chloroplatinate by a Precipitation Stripping of Pt(IV)-Loaded Alamine 336 or TBP
724
Preparation of ammonium diuranate particles by external gelation process of uranium in INET
725
Preparation of amorphous 75L2S·xP2S3·(25−x)P2S5 (mol%) solid electrolytes by a high-energy ball-milling process and their application for an all-solid-state lithium battery
726
Preparation of amorphous and crystalline Ag/TiO2 nanocomposite thin films
727
Preparation of amorphous calcium carbonate nanoparticles from impure dolomitic marble with the aid of poly(acrylic acid) as a stabilizer
728
Preparation of amorphous carbon nanotubes using attapulgite as template and furfuryl alcohol as carbon source
729
Preparation of amorphous composites of silicon nitride and carbon layers on silica glass by chemical vapor deposition method
730
Preparation of amorphous composites with polymer-derived silicon nitride matrix reinforced by three-dimensional silica fiber
731
Preparation of amorphous Fe-based magnetic powder by water atomization
732
Preparation of amorphous fluoride films by electron cyclotron resonance plasma-enhanced chemical vapor deposition
733
Preparation of amorphous Ga–Sn–Zn–O semiconductor thin films by RF-sputtering method
734
Preparation of amorphous Li4SiO4–Li3PO4 thin films by pulsed laser deposition for all-solid-state lithium secondary batteries
735
Preparation of amorphous lithium ion conductor thin films by pulsed laser deposition
736
Preparation of amorphous Nisingle bondCosingle bondB alloys and the effect of cobalt on their hydrogenation activity Original Research Article
737
Preparation of amorphous organic semiconductor thin films with polyperinaphthalene structure on temperature-controlled substrates by excimer laser ablation of 3,4,9,10-perylenetetracarboxylic dianhydride
738
Preparation of amorphous rare-earth films of Ni–Re–P (Re=Ce, Nd) by electrodeposition from an aqueous bath
739
Preparation of amorphous Si1−xCx (0≤x≤1) films by alternate deposition of Si and C thin layers using a dual magnetron sputtering source
740
Preparation of amorphous silica gel from Algerian siliceous by-product of kaolin and its physico chemical properties
741
Preparation of amorphous solid electrolytes in the system Li2S–SiS2–Li4SiO4 by mechanical milling
742
Preparation of amorphous-nanocrystalline composite structured Ni–P electrodeposits
743
Preparation of amperometric glucose sensor based on electrochemically polymerized films of indole derivatives
744
Preparation of amphiphilic glycerol-substituted zinc phthalocyanines using copper-free Sonogashira cross-coupling in aqueous medium
745
Preparation of amphiphilic hollow carbon nanosphere loaded insulin for oral delivery
746
Preparation of amphiphilic sucrose carbamates by reaction with alkyl isocyanates in water–alcohol mixtures
747
Preparation of amphoteric nanocomposite hydrogels based on exfoliation of montmorillonite via in-situ intercalative polymerization of hydrophilic cationic and anionic monomers
748
Preparation of an (−)-ephedrine intermediate through asymmetric reduction of 1-phenyl-1,2-propanedione by anaerobically pre-treated baker’s yeast
749
Preparation of an acellular dermal matrix using the freeze–thawing technique with and without γ irradiation
750
Preparation of an acetylene black–dihexadecyl hydrogen phosphate composite film modified glassy carbon electrode and the application in the determination of hydroxycamptothecin in blood serum
751
Preparation of an activated carbon artifact: factors influencing strength when using a thermoplastic polymer as binder Original Research Article
752
Preparation of an activated carbon artifact: oxidative modification of coconut shell-based carbon to improve the strength Original Research Article
753
Preparation of an adipogenic hydrogel from subcutaneous adipose tissue
754
Preparation of an Adsorbent from Pumice Stone and Its Adsorption Po-tential for Removal of Toxic Recalcitrant Contaminants
755
Preparation of an Ag–TiO2 photocatalyst coated on activated carbon by MOCVD
756
Preparation of an aliphatic-substituted hypervalent iodine compound, tetracoordinate 1,2-iodoxetane 1-oxide, and its application to oxidation
757
Preparation of an anti-oxidative SiC/SiO2 coating on carbon fibers by a sol–gel method
758
Preparation of an As(V) solution for scorodite synthesis and a proposal for an integrated As fixation process in a Zn refinery
759
Preparation of an asymmetric perovskite-type membrane and its oxygen permeability
760
Preparation of an asymmetrically protected phosphoramidite and its application in solid-phase synthesis of phosphopeptides
761
Preparation of an effective light-cured bonding agent for orthodontic application
762
Preparation of an efficient sorbent by washing then pyrolysis of olive wood for simultaneous solid phase extraction of chloro-phenols and nitro-phenols from water
763
Preparation of an electrochemical biosensor based on lipid membranes in nanoporous alumina
764
Preparation of an electrochemical PNA biosensor for detection of target DNA sequence and single nucleotide mutation on p53 tumor suppressor gene corresponding oligonucleotide
765
Preparation of an electrochemically modified graphite electrode and its electrochemical performance for pseudo-capacitors in a sulfuric acid electrolyte
766
Preparation of an electrochemically-formed spinel lithium manganese oxide and its charge–discharge behaviors
767
Preparation of an enantiomerically pure, highly porous metalloorganic crystal
768
Preparation of an enzymatic glucose sensor based on hybrid organic–inorganic Langmuir–Blodgett films: Adsorption of glucose oxidase into positively charged molecular layers
769
Preparation of an epoxide-hydrolyzing biocatalyst: Rhodococcus ruber DSM 44540—an activity-growth study
770
Preparation of an externally uncomplexed carbamoylborane dimer
771
Preparation of an extractant-impregnated porous membrane for the high-speed separation of a metal ion
772
Preparation of an Fe-doped visible-light-response TiO2 film electrode and its photoelectrocatalytic activity
773
Preparation of an iminodiacetic acid-modified capillary and its performance in capillary liquid chromatography and immobilized metal chelate affinity capillary electrophoresis
774
Preparation of an immobilized–stabilized catalase derivative from Aspergillus niger having its multimeric structure stabilized: The effect of Zn2+ on enzyme stability
775
Preparation of an immunoaffinity column and its application in sample cleanup for methandrostenolone residues detection
776
Preparation of an Inactivated Peste des Petits Ruminants Vaccine and Its Comparative Immunogenicity Evaluation in an Animal Model
777
Preparation of an internal surface reversed-phase restricted-access material for the analysis of hydrophobic molecules in biological matrices
778
Preparation of an ion-exchangeable polymer bead wrapped with bilayer membrane structures for high performance liquid chromatography
779
Preparation of an ion-exchangeable polymer bead wrapped with bilayer membrane structures for high performance liquid chromatography Original Research Article
780
Preparation of an open-tubular capillary column with a monolithic layer of S-ketoprofen imprinted and 4-styrenesulfonic acid incorporated polymer and its enhanced chiral separation performance in capillary electrochromatography
781
Preparation of an ordered zeolite MFI film by epitaxial growth
782
Preparation of an oxetan-phenyltetrahydropyridazine-3,6-dione derivative using some chemistry tools
783
Preparation of an oxidation protection coating for c/c composites by low pressure chemical vapor deposition Original Research Article
784
Preparation of an unusual fluoroalkyl phosphinoyl chelate complex, {k3-P,C,P,k1-O-(CF3)2PCH2C6H3CH2P(CF3)O}2Pt2
785
Preparation of analcime from local kaolin and rice husk ash
786
Preparation of Analogues of Territrem B, a Potent AChE Inhibitor
787
Preparation of analyte-sensitive polymeric supports for biochemical sensors
788
Preparation of anatase and rutile thin films by controlling oxygen partial pressure
789
Preparation of anatase F doped TiO2 sol and its performance for photodegradation of formaldehyde
790
Preparation of anatase nanocrystallines from low concentration precursor solution via a microwave assisted liquid phase deposition (MW-LPD) process
791
Preparation of anatase nanocrystals deposited on hydroxyapatite by hydrothermal treatment
792
Preparation of anatase TiO2 nanoparticles with high thermal stability and specific surface area by alcohothermal method
793
Preparation of anatase TiO2 supported on alumina by different metal organic chemical vapor deposition methods Original Research Article
794
Preparation of anatase TiO2/Ti nanotube-like electrodes and their high photoelectrocatalytic activity for the degradation of PCP in aqueous solution Original Research Article
795
Preparation of anhydrous dicalcium phosphate, DCPA, through sol–gel process, identification and phase transformation evaluation
796
Preparation of anhydrous lanthanum bromide for scintillation crystal growth
797
Preparation of anhydrous magnesium chloride from ammonium magnesium chloride hexahydrate
798
Preparation of anilinemethyltriethoxysilane/polydimethylsiloxane sol–gel coatings for solid-phase microextraction of aromatic compounds Original Research Article
799
Preparation of anion exchange membranes by an efficient chloromethylation method and homogeneous quaternization/crosslinking strategy
800
Preparation of anionic clay–birnessite manganese oxide composites by interlayer oxidation of oxalate ions by permanganate
801
Preparation of anionic phosphine ligands in situ for the palladium-catalyzed Buchwald/Hartwig amination reactions of aryl halides
802
Preparation of annular hollow fibre membranes
803
Preparation of anodes for oxygen evolution by electrodeposition of composite oxides of Pb and Ru on Ti
804
Preparation of anodic aluminum oxide tubular membranes with various geometries
805
Preparation of anodized TiO2 photoanode for photoelectrochemical hydrogen production using natural seawater
806
Preparation of anthracene micro-crystals by spin-coating and atomic force microscopy study of the molecular packing
807
Preparation of antibacterial coating film using ZnO nanoparticles and epoxy resin
808
Preparation of antibacterial electrospun Poly lactic-co–glycolic acid nanofibers containing Hypericum Perforatum with bedsore healing property and evaluation of its drug release performance
809
Preparation of antibodies against a novel immunosuppressant, FTY720, and development of an enzyme immunoassay for FTY720 Original Research Article
810
Preparation of antibodies type IgY against Salmonella typhi lipopolysaccharide in chicken eggs
811
Preparation of Antibody Against Immunodominant Membrane Protein (IMP) of Candidatus Phytoplasma aurantifolia
812
Preparation of anti-CD4 monoclonal antibody-conjugated magnetic poly(glycidyl methacrylate) particles and their application on CD4+ lymphocyte separation
813
Preparation of anti-corrosion films by microarc oxidation on an Al–Si alloy
814
Preparation of anti-fogging low density polyethylene film by using γ-irradiation
815
Preparation of anti-fogging low density polyethylene film by using γ-irradiation
816
Preparation of antifouling polyvinylpyrrolidone (PVP 40K) modified polyethersulfone (PES) ultrafiltration (UF) membrane for water purification
817
Preparation of antifouling ultrafiltration membranes with poly(ethylene glycol)-graft-polyacrylonitrile copolymers
818
Preparation of antigens and immunoadsorbents corresponding to the Streptococcus group a cell-wall polysaccharide Original Research Article
819
Preparation of antigens from midgut of Hyalomma anatolicum anatolicum and determining their immunoprotective effects
820
Preparation of antigens from midgut of Hyalomma anatolicum anatolicum and determining their immunoprotective effects
821
Preparation of anti-human cardiac troponin I immunomagnetic nanoparticles and biological activity assays
822
Preparation of Antimicrobial Hydrogel Film Based on Chitosan, Poly Vinyl Poly Pyrrolidone, and Copper Ions
823
Preparation of Antimony Oxide in Different Media and Its Effect on the pH Measurement
824
Preparation of antimony-doped SnO2 nanocrystallites
825
Preparation of antioxidants from sugarcane molasses
826
Preparation of anti-oxidative carbon fiber at high temperature
827
Preparation of anti-oxidative SiC/SiO2 coating on carbon fibers from vinyltriethoxysilane by sol–gel method
828
Preparation of antireflective coatings with high transmittance and enhanced abrasion-resistance by a base/acid two-step catalyzed sol–gel process
829
Preparation of antireflective SiO2 nanometric films
830
Preparation of antisera and development of a direct enzyme-linked immunosorbent assay for the determination of the antifouling agent Irgarol 1051
831
Preparation of antitumor oxaliplatin/cisplatin docking dinuclear platinum complex
832
Preparation of anti-wax coatings and their anti-wax property in crude oil
833
Preparation of apatite-type La9.33Ge6O26 single-crystal from sintered ceramics by a seeding method and its oxide ionic conduction
834
Preparation of aqueous crosslinked dispersions of functionalized poly(d,l-lactic acid) with a thermomechanical method
835
Preparation of aqueous dispersion of colloidal α-Fe nanoparticle by phase transfer
836
Preparation of aqueous dispersion of colloidal α-Fe nanoparticle by phase transfer
837
Preparation of aqueous dispersion of thermoplastic sizing agent for carbon fiber by emulsion/solvent evaporation
838
Preparation of aqueous dispersion of β-carotene nano-composites through complex formation with starch dextrin
839
Preparation of aqueous sols of tungsten oxide dihydrate from sodium tungstate by an ion-exchange method
840
Preparation of aqueous two-phase systems composed of two pH-response polymers and liquid–liquid extraction of demeclocycline
841
Preparation of arabinoxylobiose from rye xylan using family 10 Aspergillus aculeatus endo-1,4-β-d-xylanase
842
Preparation of Arene Carboxylic Acids Via a Polymer-Supported Kröhnke Reaction
843
Preparation of aromatic carboxylic acid-functionalized polysulfone and preliminary exploration of florescence emission character of formed polymer-rare earth complexes
844
Preparation of Aromatic Polycarbonate Nanoparticles using Supercritical Carbon Dioxide
845
Preparation of arrowroot starch nanoparticles by butanol-complex precipitation, and its application as bioactive encapsulation matrix
846
Preparation of artificial canine femoral stem with HA–Ti ladder-type coating on plasma-sprayed pure Ti substrate and its performance evaluation
847
Preparation of artificial hyper-hydrophilic micro-environments (polymeric salts) surrounding enzyme molecules: New enzyme derivatives to be used in any reaction medium
848
Preparation of aryl ketones via Ni-catalyzed Negishi-coupling reactions with acid chlorides
849
Preparation of aryldiazene complexes of rhodium
850
Preparation of aryl-substituted 2-oxyindoles by superelectrophilic chemistry
851
Preparation of ASA (acrylonitrile-styrene-acrylate) structural latexes via seeded emulsion polymerization
852
Preparation of aspirin and probucol in combination loaded chitosan nanoparticles and in vitro release study
853
Preparation of aspirin and probucol in combination loaded chitosan nanoparticles and in vitro release study
854
Preparation of asymmetric Ni/ceramic composite membrane by electroless plating
855
Preparation of asymmetric perovskite-type membranes by a settlement method
856
Preparation of asymmetric polyacrylonitrile membrane with small pore size by phase inversion and post-treatment process
857
Preparation of asymmetric polyetherimide hollow fibre membrane with high gas selectivities
858
Preparation of asymmetric pure titania ceramic membranes with dual functions
859
Preparation of asymmetrical functionalized TTF; characterization of their charge transfer salts
860
Preparation of atomically clean and flat Si(1 0 0) surfaces by low-energy ion sputtering and low-temperature annealing
861
Preparation of atomically dispersed Cu species on a TiO2 (1 1 0) surface premodified with an organic compound
862
Preparation of Au and Ag nanoparticles using Artemisia annua and their in vitro antibacterial and tyrosinase inhibitory activities
863
Preparation of Au and Au–Pt nanoparticles within PMMA matrix using UV and X-ray irradiation
864
Preparation of Au catalyst on modified SiO2 via adsorbed-layer nanoreactor technique
865
Preparation of Au colloids by polyol process using NaHCO3 as a buffering agent
866
Preparation of Au nanoparticle dispersed Nb2O5 composite film by liquid phase deposition
867
Preparation of Au nanoparticles in the presence of low generational poly(amidoamine) dendrimer with surface hydroxyl groups
868
Preparation of Au nanoparticles-coated polystyrene beads and its application in protein immobilization
869
Preparation of Au/CeO2 catalyst and its catalytic performance for HCHO oxidation
870
Preparation of Au/MgxAlO hydrotalcite catalysts for CO oxidation Original Research Article
871
Preparation of Au/TiO2 catalysts by suspension spray reaction method and their catalytic property for CO oxidation Original Research Article
872
Preparation of Au/TiO2 for catalytic preferential oxidation of CO under a hydrogen rich atmosphere at around room temperature
873
Preparation of Au/Y2O3 and Au/NiO catalysts by co-precipitation and their oxidation activities
874
Preparation of Au/ZnO nanocomposites by radio frequency co-sputtering
875
Preparation of Au2S3 and nanocrystalline gold by sonochemical method
876
Preparation of Au–Ag coreshell nanoparticles and application of bimetallic sandwich in surface-enhanced Raman scattering (SERS)
877
Preparation of Au-CeO2 and Au-Al2O3/AISI 304 austenitic stainless steel monoliths and their performance in the catalytic oxidation of CO
878
Preparation of Au–Pd/C catalysts by adsorption of metallic species in aqueous phase for selective oxidation
879
Preparation of autoclaved aerated concrete using copper tailings and blast furnace slag
880
Preparation of automobile organic emission surrogates for photochemical model validation
881
Preparation of axially non-uniform Pd catalytic monoliths by chemical vapour deposition Original Research Article
882
Preparation of Azacrown-Functionalized 2-O-Methyl Oligoribonucleotides, Potential Artificial RNases
883
Preparation of azaindolines and benzoyl substituted azaindolines: precursors of triazabenzo[cd]azulen-9-one PDE4 inhibitors
884
Preparation of Azepinoindole Derivatives via Oxidative Palladium Couplings
885
Preparation of azidoaryl- and azidoalkyloxazoles for click chemistry
886
Preparation of azithromycin microcapsules by a layer-by-layer self-assembly approach and release behaviors of azithromycin
887
Preparation of Azithromycin Nanofibers as Controlled Release Ophthalmic Drug Carriers Using Electrospinning Technique: In Vitro and In Vivo Characterization
888
Preparation of azo waveguide polyurethane and its analysis of Y-branch and Mach–Zehnder optical switches
889
Preparation of azobenzene-mica complex and its photoresponse to ultraviolet irradiation
890
Preparation of azulenyllithium and magnesium reagents utilizing halogen–metal exchange reaction of several iodoazulenes with organolithium or magnesium ate complex
891
Preparation of B/C/N materials from melamine resin with borate and their capacitive performance
892
Preparation of B4C-mixed graphite by pressureless sintering and its air oxidation behavior Original Research Article
893
Preparation of Ba Sr/TiO thin films by sol–gel method with 0.5 0.5 3 rapid thermal annealing
894
Preparation of Ba(Pb1−xBix)O3 electrode thin films by rf magnetron sputtering
895
Preparation of BA/ST/AM nano particles by ultrasonic emulsifier-free emulsion polymerization
896
Preparation of BA/ST/AM nano particles by ultrasonic emulsifier-free emulsion polymerization
897
Preparation of Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) feedstocks with different thermoplastic binders and their use in the production of thin tubular membranes by extrusion
898
Preparation of Ba1−xSrxWO4 and Ba1−xCaxWO4 films on tungsten plate by mechanically assisted solution reaction at room temperature
899
Preparation of BaCe0.9Yb0.1O3-δ asymmetrical membrane for hydrogen separation at high tempratures
900
Preparation of background samples for accurate low-level measurements by liquid-scintillation spectrometry
901
Preparation of background samples for accurate low-level measurements by liquid-scintillation spectrometry
902
Preparation of BaF2 thin films for the application to MIS tunnel emitter
903
Preparation of bamboo-based mesoporous activated carbon by phosphoric acid activation
904
Preparation of BaMgAl10O17:Eu2+ and Its Phase Behavior in Microemulsion System
905
Preparation of barium hafnate fine powders by oxalate method
906
Preparation of barium hexaferrite coatings using atmospheric plasma spraying
907
Preparation of barium monohydrofluoride BaF2·HF from nitrate aqueous solutions
908
Preparation of barium strontium titanate Ba1−xSrxTiO3 (0 ⩽ x ⩽ 0.2) single-crystal nanorods by a novel combined method
909
Preparation of barium strontium titanate Ba1−xSrxTiO3 (0 ⩽ x ⩽ 0.2) single-crystal nanorods by a novel combined method
910
Preparation of Barium Strontium Titanate Thick Films by a Modified Sol-Gel Route
911
Preparation of barium strontium titanate using a modified polymeric precursor method
912
Preparation of barium sulfate particles using filtration dispersion precipitation method in O/W system
913
Preparation of barium titanate ultrafine particles from rutile titania by a hydrothermal conversion
914
Preparation of basic lead carbonate from lead dust by hydrometallurgical processes
915
Preparation of basic lead oxide from spent lead acid battery paste via chemical conversion
916
Preparation of basic mesoporous molecular sieves K2O/Mg-MCM-41 and its catalytic performance on the cracking of soybean oils
917
Preparation of basic mesoporous molecular sieves K2O/Mg-MCM-41 and its catalytic performance on the cracking of soybean oils
918
Preparation of basil seed mucilage aerogels loaded with paclitaxel nanoparticles by the combination of phase inversion technique and gas antisolvent process
919
Preparation of BaSO4 nanoparticles with self-dispersing properties
920
Preparation of BaTi4O9 and Ba2Ti9O20 ceramics by the wet chemical gel-carbonate method and their dielectric properties
921
Preparation of Ba–Ti–O films by laser chemical vapor deposition
922
Preparation of BaTiO3 powders using supercritical CO2 drying of gels
923
Preparation of BaTiO3 single crystals using the modified SiO2-exaggerated grain growth method
924
Preparation of BaTiO3 thin films by mist plasma evaporation on MgO buffer layer
925
Preparation of BaTiO3-based ceramics by nanocomposite doping process
926
Preparation of BaTiO3-based chip thermistors by gelcasting approach
927
Preparation of BaZr0.1Ce0.7Y0.2O3−δ thin membrane based on a novel method-drop coating
928
Preparation of BaZrO3 nanopowders by spray pyrolysis method
929
Preparation of BaZrO3–BaTaO2N solid solutions and the photocatalytic activities for water reduction and oxidation under visible light
930
Preparation of BaZrxTi1−xO3 by the hydrothermal process from peroxo-precursors
931
Preparation of benzoheterocyclic carbaldeydes
932
Preparation of benzophenone imine complexes of transition metals
933
Preparation of benzoyl fluoride from benzotrifluoride catalyzed by niobium oxide Original Research Article
934
Preparation of Berberine-montmorillonite-metolachlor formulations from hydrophobic/hydrophilic mixtures
935
Preparation of Bi Nanowires from the Reaction between Ammonia and Bi1.7V8O16
936
Preparation of Bi2O3@Bi2S3 core–shell nanoparticle assembled thin films and their photoelectrochemical and photoresponsive properties
937
Preparation of Bi2S3 nanorods by microwave irradiation
938
Preparation of Bi2S3 thin films with a nanoleaf structure by electrodeposition method
939
Preparation of Bi2Te3 thermoelectric powders by applying the recycled TeO2 to wet chemical process
940
Preparation of Bi2WO6– and BiOI–allophane composites for efficient photodegradation of gaseous acetaldehyde under visible light
941
Preparation of Bi4Ti3O12 nanopower by azeotropic co-precipitation and dielectric properties of the sintered ceramic
942
Preparation of Bi4Ti3O12 particles by crystallization from glass
943
Preparation of biaxially textured CeO2 buffer layers by ion beam-assisted deposition
944
Preparation of bi-continuous macroporous polyamide copolymer membranes for cell culture
945
Preparation of bi-continuous Nylon-66 porous membranes by coagulation of incipient dopes in soft non-solvent baths Original Research Article
946
Preparation of BiFeO3 films by wet chemical method and their characterization
947
Preparation of bifunctional isocyanate hydroxamate linkers: synthesis of carbamate and urea tethered polyhydroxamic acid chelators
948
Preparation of bifunctional NiPb/ZnO-diatomite-ZSM-5 catalyst and its reactive adsorption desulfurization coupling aromatization performance in FCC gasoline upgrading process
949
Preparation of bimanual movements with same and different amplitudes: specification interference as revealed by reaction time
950
Preparation of bimetal incorporated TiO2 photocatalytic nano-powders by flame method and their photocatalytic reactivity for the degradation of diluted 2-propanol
951
Preparation of bimetal incorporated TiO2 photocatalytic nano-powders by flame method and their photocatalytic reactivity for the degradation of diluted 2-propanol
952
Preparation of binary metal electrocatalysts by self-assembly of precursor ionic species on gold and reduction of nitrate ions
953
Preparation of binary washcoat deposited on cordierite substrate for catalytic applications
954
Preparation of binder-free thin film Li4Ti5O12 anode with an adjustable thickness through anodic TiO2 nanotubes
955
Preparation of binderless nanopore-isotropic graphite for inhibiting the liquid fluoride salt and Xe135 penetration for molten salt nuclear reactor
956
Preparation of bioactive amorphous-like titanium oxide layer on titanium by plasma oxidation treatment
957
Preparation of bioactive glass ceramic beads with hierarchical pore structure using polymer self-assembly technique
958
Preparation of bioactive glass ceramic nanoparticles by combination of sol–gel and coprecipitation method
959
Preparation of bioactive podolactones via a new Pd-catalysed bislactonisation reaction. Synthesis of oidiolactone C
960
Preparation of bioactive polymer-based composite by different techniques and application in tissue engineering: A review
961
Preparation of bioactive porous HA/PCL composite scaffolds
962
Preparation of bioactive sodium titanate ceramics
963
Preparation of bioactive spherical particles in the CaO–SiO2 system through sol–gel processing under coexistence of poly(ethylene glycol)
964
Preparation of bioactive Ti metal surface enriched with calcium ions by chemical treatment
965
Preparation of bioactive Ti6A14V surfaces by a simple method
966
Preparation of bioactive TiO film on porous titanium by micro-arc oxidation
967
Preparation of bioactive titania films on titanium metal via anodic oxidation
968
Preparation of bioactive titanium metal via anodic oxidation treatment
969
Preparation of bioceramic films containing hydroxyapatites on Ti–6Al–4V alloy surfaces by the micro-arc oxidation technique
970
Preparation of biocompatible magnetite–PLGA composite nanoparticles using supercritical fluid extraction of emulsions
971
Preparation of biocompatible membranes by electrospinning Original Research Article
972
Preparation of biodegradable and thermoresponsive enzyme–polymer conjugates with controllable bioactivity via RAFT polymerization
973
Preparation of biodegradable chitin/gelatin membranes with GlcNAc for tissue engineering applications
974
Preparation of biodegradable chitin/gelatin membranes with GlcNAc for tissue engineering applications
975
preparation of biodegradable composite starch/tragacanth gum/nanoclay film and study of its physicochemical and mechanical properties
976
Preparation of Biodegradable Hollow Nanocapsules by Silica Template Method
977
Preparation of Biodegradable Low Density Polyethylene by Starch – Urea Composition for Agricultural Applications
978
Preparation of biodegradable nanoporous microspherical aerogel based on alginate
979
Preparation of biodegradable networks by photo-crosslinking lactide, ε-caprolactone and trimethylene carbonate-based oligomers functionalized with fumaric acid monoethyl ester
980
Preparation of biodegradable poly (methyl vinyl ether-co-maleic anhydride) nanostructured microparticles by precipitation with a compressed antisolvent
981
Preparation of biodegradable poly(3-hydroxybutyrate) (PHB) and poly(ethylene glycol) (PEG) graft copolymer
982
Preparation of biodegradable poly(lactic acid-co-aspartic acid) by copolymerization processes
983
Preparation of biodegradable poly[(dimethyldichlorosilane)-alt-(fumaric acid/sebacic acid)]-co-PEG block copolymer
984
Preparation of biodegradable polyesteramide microspheres
985
Preparation of biodegradable polymeric hollow microspheres using O/O/W emulsion stabilized by Labrafil®
986
Preparation of biodiesel by transesterification from cottonseed oil using the basic dication ionic liquids as catalysts
987
Preparation of biodiesel from crude oil of Pongamia pinnata
988
Preparation of biodiesel from Jatropha curcas L. oil produced by two-phase solvent extraction
989
Preparation of biodiesel from rice bran fatty acids catalyzed by heterogeneous cesium-exchanged 12-tungstophosphoric acids
990
Preparation of biodiesel from soybean oil catalyzed by Al-Ca hydrotalcite loaded with K2CO3 as heterogeneous solid base catalyst
991
Preparation of biodiesel from soybean oil using supercritical methanol and co-solvent
992
Preparation of biodiesel from waste cooking oil via two-step catalyzed process
993
Preparation of biodiesel from waste oils catalyzed by a Brّnsted acidic ionic liquid
994
Preparation of biofuel from argemone seed oil by an alternative cost-effective technique
995
Preparation of bio-fuels by catalytic cracking reaction of vegetable oil sludge
996
Preparation of biohybrid amphiphiles via the copper catalysed Huisgen [3 + 2] dipolar cycloaddition reaction
997
Preparation of bioinorganic fertilizing media by adsorption of humates on glassy aluminosilicates
998
Preparation of biological activated bamboo charcoal and its use to remove quinoline from waste water
999
Preparation of Biologically Active Recombinant Buffalo Follicle Stimulating Hormone (rbuFSH) from Buffalo pituitaries
1000
Preparation of biomolecule gel matrices for electron microscopy
