مرکز منطقه ای اطلاع رساني علوم و فناوري -

چكيده لاتين :

In this research, the influence of chemical composition of slags and the melting rate on the impurity of commercial grade iron in ESR processing has been investigated. The chemical composition and microstructure studies were evaluated, using spectrophotometer, OM and EDX analyses attached to SEM. The results show that ESR process has successfully reduced the amount and size of inclusions. In some cases, sulfide inclusions were not observed and the size of other inclusions was reduced down to 10 jum, whereas in primary electrodes the size of inclusion was up to \QQ jLUtl. An increase in the slag basicity up to a critical point and a decrease in the melting rate caused better desulfurization ability of the slags. However, the increase in the time of process was governed by the melt temperature and fluidity.