شماره ركورد كنفرانس :
3986
عنوان مقاله :
Interfacial Toughening of Glass Fiber-Epoxy Composites using Electrospun Nanofibers
پديدآورندگان :
Esmaeely Neisiany R. r.esmaeely@ce.iut.ac.ir PhD Candidate, Department of Chemical Engineering, Isfahan University of Technology , Nouri Khorasani S. Associate Professor, Department of Chemical Engineering, Isfahan University of Technology , Lee J.K.Y Research Flow, Lloyd’s Register Global Technology Centre , Ramakrishna S. Professor, Center for Nanofibers and Nanotechnology, Department of Mechanical Engineering, Faculty of Engineering, 2 Engineering Drive 3, Singapore
كليدواژه :
Epoxy composites , Interfacial toughening , Mechanical properties , Nanofibers
عنوان كنفرانس :
پنجمين كنفرانس بين المللي كامپوزيت: مشخصه سازي، ساخت و كاربردها
چكيده فارسي :
In the present research, polyacrylonitrile (PAN) nanofibers produced by electrospinning method were
employed to increase mechanical properties of glass fiber-epoxy composites, especially interlaminar shear strength.
Morphological studies of the nanofibers and nanofibers on the uni-directional glass fibers showed nanofibers are
smooth without any beads and deposited randomly on the glass fiber surfaces. Mechanical studies indicated embedding
nanofibers in fabricated composites leads to 24%, 28%, 42%, and 16% of tensile strength, bending strength,
interlaminar shear strength, and impact absorption energy, respectively compare to results from control composite
(without nanofibers). Fractographical analyses confirmed that embedding nanofibers in composites leads to tougher
fracture during composite breakage
