شماره ركورد كنفرانس :
4567
عنوان مقاله :
مدل سازي سيستم توليد همزمان سرما، گرما و توان با استفاده از انرژي هاي پاك
عنوان به زبان ديگر :
فاقد عنوان لاتين
پديدآورندگان :
شفيعي ميم محمدحسين دانشگاه بزرگمهر قائنات - دانشكده مهندسي - گروه مهندسي مكانيك، قاين , حجتي محمد دانشگاه سيستان و بلوچستان
كليدواژه :
كلكتور خورشيدي , انرژي نو , گرما و توان , توليد همزمان سرما
عنوان كنفرانس :
ششمين كنفرانس ملي ساليانه انرژي پاك
چكيده فارسي :
در كار حاضر مدل سازي و شبيه سازي يك سيستم توليد همزمان سرما، گرما و توان با استفاده از انرژيهاي نو و به كمك روش عددي انجام شده است. اين سيستم شامل يك كلكتور خورشيدي صفحه تخت به عنوان پيش گرم كن آب ورودي، يك هيتر گرمايي به عنوان جبران گرماي مورد نياز، يك منبع ذخيره آب گرم و يك چيلرجذبي LiBr مي باشد. پارامترهاي مختلف جوي موثر بر سيستم همچون شدت تابش خورشيد و دماي محيط در طول يك سال اندازه گيري شده و به نرم افزار معرفي ميگردد. سپس با توجه به مساحت كلكتور خورشيدي ميزان انرژي مورد نياز براي مخزن ذخيره و همچنين دبي عبوري بهينه از كلكتور و حجم مخزن مناسب براي سيستم تعيين مي گردد . بررسي نتايج مشخص مي كند كه با افزايش مساحت كلكتور مقدار انرژي حرارتي مورد نياز سيستم افزايش يافته و مقدار نياز سيستم به گرم كن كمكي كاهش مي يابد. دبي بهينه براي سيستم kg/hr 2000 به دست آمده، و رابطه مستقيمي بين اندازه كلكتور، دبي بهينه و حجم مخزن ذخيره به دست آمده است.
چكيده لاتين :
In the present work, modelling and simulation of a combined cooling heating and
power system has been done using renewable energies and by numerical method.
This system includes a solar collector that is used as a preheater of water, an
electerticl heater that is employed to recover the necessary heat, a reservoir to store
the hot water and a LiBr absorbed chiller. The parameters in which the system is
affected by them such as intensity of sun’s radiation and sourrounding temperature
is measured during a whole yeare. These parameters are used as input for the
software. Then, the amount of required energy for the storage tank as well as the
optimal flow through the collector and the volume of the reservoir is determind
according to the solar collector area in the system. The acquired results show that the
amount of thermal required energy in system is increased and the capacity of
electirical preheater is reduced by augmonting the collector area. Optimum debit of
sysdtem is obtained 2000 kg/hr, and there is a direct relationship between collector
size, optimal discharge and storage volume of tank.