شماره ركورد كنفرانس :
3315
عنوان مقاله :
تهيه كاتد باتري ليتيمي
عنوان به زبان ديگر :
Synthesis of the cathode materials in lithium batteries
پديدآورندگان :
سدني سپيده دانشگاه آزاداسلامي واحدگرگان - دانشكده علوم شيمي كاربردي
كليدواژه :
باتري ليتيمي , اكسيدكامپوزيت , عملكرد الكتروشيميايي
عنوان كنفرانس :
دومين سمينار شيمي كاربردي ايران
چكيده فارسي :
توسعه تكنولوژي و افزايش تقاضا براي ابزار قابل حمل منجر به تحقيقات گسترده اي بر روي مواد كاتدي شده است، كه نقش مهمي در تعيين عملكرد الكتروشيميايي باتري دارند . در بين مواد كاتدي نوع LiMn2O4 اسپينل، LixNiyMn2-yO4 به دليل ظرفيت و ولتاژ عملكرد بالا، به عنوان يكي از بهترين مواد كاتدي براي باتري هاي يون ليتيمي درنظرگرفته شده است . در اين كار يكروش ترسيب آندي جديد براي سنتز ليتيم نيكل منگنز اكسيد به عنوان ماده كاتدي براي باتري هاي يون ليتيمي به كار گرفته شد. نتايج نشان داد كه افزودن نيكل به منگنز دي اكسيد ميزبان تاثير مثبت داشته و عوامل مختلفيي را ارتقامي دهد : ازجمله همگن بودن اندازه ذرات، كاهش مقاومت انتقال بار، افزايش ظرفيت شارژ/ دشارژ و بهبود چرخه ندگي. تحقيقات بيشتر را مي توان به منظور بهينه سازي تركيب كاتدي LixNiyMn2-yO4 بررسي قابليت كاربرد اين روش براي ساير مواد فعال از نظر الكتروشيميايي انجام داد.
چكيده لاتين :
The demand for secondary batteries with high electrochemical performance, safety and low
cost environmental friendly materials is rapidly increasing.Technological development and
increased demand for mobile equipement has led to wide-span research on new cathode
materials, which play an important role in determining battery's electrochemical
performances. Among the spinel type LiMn2O4 cathodes, LixNiyMn2-yO4 has been considered as
one of the most promising cathode materials for lithium ion batteries due to its high capacity
and operating voltage. In this work, we employed a novel anodic electrodeposition method for
the synthesis of lithium nickel manganese oxide as cathode material of lithium ion batteries.
Results showed that the addition of nickel into the host manganese dioxide has a positive effect
and evaluate different phenomena such as: homogenization of particle size, reducing charge
transfer resistance, increasing charge/discharge capacity and extending of cycle life. The
obtained optimized material LixNiyMn2-yO4 (x=0.5 and y=0.8) showed a first cycle discharge
capacity in the order of 145 mAh/g. The charge transfer resistance of the latter was
considerably lower in comparison with other samples.