شماره ركورد كنفرانس :
5060
عنوان مقاله :
Eliminating Current Sensors in Simplified Predictive Direct Voltage Control of RSM
Author/Authors :
Arash , Fereidooni Department of Electrical Engineering - Shahid Rajaee Teacher Training University، Tehran, Iran , S. Alireza ، Davar Department of Electrical Engineering - Shahid Rajaee Teacher Training University، Tehran, Iran , Cristian، Garcia Department of Electrical Engineering - Universidad de Talca Curico, Chile , Jose، Rodriguez Dept. of Engineering Universidad Andres Bello ،Santiago, Chile
كليدواژه :
Remove current sensor , simplified FCS_MPC , synchronous reluctance motor
عنوان كنفرانس :
11th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC)
چكيده فارسي :
فاقد چكيده فارسي
چكيده لاتين :
Reluctance synchronous motor (RSM) has attracted the attentions because of its high efficiency. The predictive control, as an advanced control method, has also been used to control this motor. The simplified FCS-MPC (finite control set model predictive control) method has become a successful version of the predictive control because of its simplicity, reduced computation, and elimination of the weighting factor. In this method, to predict the current, it is necessary to have two current sensors to measure the currents. Therefore, the possible failure of the current sensors will stop the process in the control loop. In this paper, the elimination of all current sensors via an observer is proposed for the simplified FCS-MPC method. This issue will increase the reliability of the control method. Also, removing the current sensors reduces the cost of the hardware. The performance of this observer has been evaluated by simulation.
