شماره ركورد كنفرانس :
5290
عنوان مقاله :
اكسيد فلزات واسطه بر پايه نانو ذرات به عنوان كاتاليست براي اكسايش منواكسيد كربن و هيدرو­كربن­ها
عنوان به زبان ديگر :
Transition Metal Oxides supported on nanoparticles as catalyst for the Oxidation of Carbon Monoxide and Hydrocarbons
پديدآورندگان :
رهنماي رهسپار فاطمه گروه شيمي، دانشكده علوم، دانشگاه تهران، ايران , ملكي عباس abbas.maleki@pnu.ac.ir گروه شيمي، دانشگاه پيام نور، تهران، ايران , عباسي زاده فاطمه گروه شيمي، دانشگاه پيام نور، تهران، ايران
تعداد صفحه :
5
كليدواژه :
نانو كامپوزيت , آلايندگي , تلقيح , مبدل كاتاليستي
سال انتشار :
1401
عنوان كنفرانس :
ششمين كنفرانس شيمي كاربردي ايران
زبان مدرك :
فارسي
چكيده فارسي :
در اين پژوهش اثر نانو كامپوزيت آلومينيوم –سريوم –زيركونيوم Al2O3-CeO2-ZrO2 به عنوان پايه با تركيب سه تايي عناصر واسطه مس، كبالت و سريوم به عنوان فاز فعال درمبدل كاتاليستي براي تبديل آلاينده هاي خروجي از اگزوز خودروها به تركيبات بي ضرر دي اكسيدكربن و آب بررسي شد. نانو كامپوزيت به روش هيدروترمال در مدت زمان 20 ساعت با استفاده از سورفكتانت سديم دودسيل سولفات تهيه شد. پس از خشك وكلسينه شدن در دماي 550 درجه به مدت 4 ساعت، بهترين نسبت سريوم به زيركونيوم با در نظر گرفتن اندازه ذرات (با استفاده از ميكروسكوپ الكتروني روبشي) ومساحت سطح ويژه ( با استفاده از BET) كه 1:1 بود انتخاب شد. بررسي فازهاي تشكيل شده با استفاده از پراش اشعه ايكس و نحوه پخش عنصري پوشش نانو كامپوزيت بر روي مونوليت سراميكي با استفاده از ميكروسكوپ الكتروني روبشي انجام گرديد. در ادامه نمك هاي نتيرات مس، كبالت و سريوم بر روي نانو كامپوزيت پايه به روش تلقيح مرطوب پوشش داده شد و در دماي 500 درجه سانتي گراد به مدت 4 ساعت كلسينه گرديد. اندازه گيري ميزان عناصر درپوشش نهايي با استفاده ازطيف‌سنجي پلاسماي جفت‌شده القايي و مورفولوژي سطح با استفاده از ميكروسكوپ الكتروني روبشي انجام گرديد. در پايان خواص كاتاليستي تركيب نهايي مورد بررسي قرار گرفت.
چكيده لاتين :
In this study, the effect of Al2O3-CeO2-ZrO2 nanocomposite as a base with a ternary combination of transition metal oxides of copper, cobalt and cerium as an active phase on the conversion of vehicle exhaust pollutants to non-toxic compounds of carbon dioxide and water was investigated in a catalytic converter. Nanocomposite was prepared by hydrothermal method at a temperature of 160°C and a duration of 20 hours using SDS surfactant with three ratios of 7:3, 5:5, and 3:7 cerium to zirconium. After drying and calcination at 550°C for 4 hours, the best ratio of cerium to zirconium was selected by considering the particle size and the specific surface area of 1:1. The stable slurry was coated on the ceramic monolith by impregnation method. Investigation of formed phases and element distribution of nanocomposite coating on ceramic monolith was done using X-ray diffraction and SEM, respectively. Then, copper, cobalt and cerium nitrate salts were loaded on the base nanocomposite by wet impregnation. The amount of elements in the final coating and surface morphology were determined using inductively coupled plasma spectroscopy and scanning electron microscopy methods. Finally, the catalytic activity of the final composition was investigated. The reaction temperature of 50% percent conversion of monoxide and hydrocarbon was 249 and 449 °C, respectively.
كشور :
ايران
لينک به اين مدرک :
بازگشت