شماره ركورد كنفرانس :
5113
عنوان مقاله :
بررسي فني اقتصادي مكانيزاسيون معدن زغالسنگ پروده 5 طبس
عنوان به زبان ديگر :
Technical-economic study of mechanization of Parvadeh 5 Tabas coal mine
پديدآورندگان :
شريفي تبريزي داود davoud.sharifitabrizi@birjand.ac.ir دانشجو كارشناسي ارشد مهندسي معدن و محيط زيست، دانشگاه بيرجند , موسوي نصب سيد مهدي mousavi_nasab@yahoo.com استاديار مجتمع آموزش عالي زرند , شوشي ياور yavar.shoshi@yahoo.com كارشناس ارشد استخراج معدن، مجتمع آموزش عالي زرند
كليدواژه :
ارزش خالص فعلي , بررسي اقتصادي , جبهه كار بلند , مكانيزاسيون , نرخ داخلي بازگشت سرمايه
عنوان كنفرانس :
پنجمين كنگره ملي زغالسنگ
چكيده فارسي :
عمليات استخراج زغالسنگ معدن پروده 5 به روش دستي سنتي انجام ميشود. هزينه هاي استخراج و قيمت تمام شده هر تن زغالسنگ استخراج شده زياد است. با توجه به خصوصيات لايه زغالسنگ و قابليت مكانيزايزاسيون كارگاه هاي استخراج معدن ضروري است به منظور افزايش راندمان و كاهش هزينه ها، سيستم مكانيزه جايگزين روش فعلي گردد. در اين تحقيق ابتدا وضعيت موجود از نقطه نظر اقتصادي مورد بررسي قرار گرفته است و با بررسي پارامترهاي اقتصادي نظير نرخ داخلي بازگشت سرمايه و ارزش خالص فعلي امكان مكانيزاسيون مورد بررسي قرار گرفته و ماشين آلات مناسب انتخاب ميشود. در ادامه امكان مكانيزاسيون از نظر اقتصادي باتوجه به ماشين آلات انتخاب شده و با استفاده از نرم افزار كامفار مورد تحليل و بررسي قرار ميگيرد. نتايج نشان ميدهد نرخ داخلي بازگشت سرمايه و ارزش خالص فعلي سيستم مكانيزه بيشتر از روش استخراج سنتي است. از روش مورد مطالعه در اين تحقيق ميتوان در بررسي فني اقتصادي قابليت مكانيزاسيون ديگر معادن كشور بهره برد.
چكيده لاتين :
The coal mining operations of Parvadeh 5 mine are done by traditional manual method. Extraction costs and the cost price of each ton of coal mined are high. Due to the characteristics of the coal layer and the mechanization capability of mining workshops, it is necessary to replace the current method in order to increase efficiency and reduce costs. In this research, the current situation is examined from an economic point of view, and by examining economic parameters such as the internal rate of return on investment and the current net value, the possibility of mechanization is examined and appropriate machines are selected. Then, the possibility of mechanization is economically selected according to the selected machines and analyzed using Kamfar software. The results show that the internal rate of return on investment and the net present value of the mechanized system are higher than the traditional extraction method. The method studied in this research can be used in the technical and economic study of the mechanization capability of other mines in the country.