پديدآورندگان :
Saadatbakhsh Mohammad saadatbakhsh@khu.ac.ir Assistant Professor, Mechanical Engineering Department, Kharazmi University./Visiting Professor, School of Advanced Technologies, Iran University of Science and University, Tehran, Iran. , Mahmoudi Surman Abad Fallah fallahmahmoudi2@gmail.com M.Sc. Student, Mechanical Engineering Department, Kharazmi University, University, Tehran, Iran. , Nowroozlou Hooman hooman.nowroozlou@khu.ac.ir M.Sc. Student, Mechanical Engineering Department, Kharazmi University, University, Tehran, Iran. , Habibi Kasra kasrahabibi20@gmail.com B.Sc. Student, Mechanical Engineering Department, Kharazmi University, University, Tehran, Iran.
كليدواژه :
Desuperheater , Structural innovation , Numerical simulation , DPM , Thermal desalination
چكيده فارسي :
One of the methods to decrease the temperature of superheated steam is by injecting cooling water using a desuperheater, the evaporation of the droplets leads to a reduction in superheated steam’s temperature. In this study, a desuperheater model with the injection of cooling water against the direction of the superheated steam flow after a static mixing element and another model without the static mixer are simulated by using the discrete phase model (DPM) and implementing the lagrangian-eulerian approach. Heat and mass transfer between water droplets and superheated steam is simulated as a two-phase 3D flow in ANSYS FLUENT by considering the standard k-ε turbulence model. The effect of the static mixer on droplet evaporation is studied, the results indicate that the presence of a static mixer leads to an increase in mixture between the injected droplets and superheated steam and this phenomenon improves the heat transfer and increases the evaporation rate
