Author/Authors
KAHRAMAN, Fatih Dokuz Eylül Üniversitesi - Mühendislik Fakültesi - Makina Mühendisliği Bölümü, Turkey , GENÇER, Gökçe Mehmet Dokuz Eylül Üniversitesi - Mühendislik Fakültesi - Makina Mühendisliği Bölümü, Turkey , KARADENİZ, Süleyman Dokuz Eylül Üniversitesi - Mühendislik Fakültesi - Makina Mühendisliği Bölümü, Turkey
Title Of Article
INVESTIGATION OF WEAR BEHAVIOUR OF PLASMA NITRIDED X40CrMoV5-1 HIGH ALLOY STEEL
شماره ركورد
16636
Abstract
X40CrMoV5-1 high-alloyed steel was plasma nitrided for different treatment times (3h, 5h and 7h) and temperatures (450, 500 and 550 °C) under at a constant gas mixture (75% H2+25% N2). The plasma nitriding properties of X40CrMoV5-1 high-alloyed steel have been examined by evaluating phase composition, hardness profile, compound layer thickness, case depth and wear strength. It was found that double layers (compound and diffusion) formed on the surface of the samples and increasing of treatment time and temperature has increased the layers thicknesses. It was found that plasma nitriding improves the wear strength, which depends on thicknesses and hardness of the diffusion layer, but the compound layer reduces the wear resistance by breaking off and forming abrasive particles because of the high hardness.
From Page
7
NaturalLanguageKeyword
X40CrMoV5 , 1 , Plasma nitriding , Wear
JournalTitle
Journal Of The Faculty Of Engineering and Architecture Of Gazi University
To Page
14
JournalTitle
Journal Of The Faculty Of Engineering and Architecture Of Gazi University
Link To Document