Author/Authors
KAYIR, Yunus Gazi Üniversitesi - Teknik Eğitim Fakültesi, Turkey , ASLAN, Sıddık Gazi Üniversitesi - Ticaret Turizm Fakültesi, Turkey , AYTÜRK, Ahmet Gazi Üniversitesi - Teknik Eğitim Fakültesi, Turkey
Title Of Article
ANALYZING THE EFFECTS OF CUTTING TOOLS GEOMETRY ON THE TURNING OF AISI 316Ti STAINLES STEEL WITH TAGUCHI METHOD
شماره ركورد
16670
Abstract
In this study, A Taguchi model were designed for turning AISI 316 Ti stainless steel. Experimental works were made on the conventional machine tools. Cutting tools that were manufactured with different edge geometries and coated with TiCN-Al203-TiN were used in the experimental works. Effects of edge geometry of cutting tools and used cutting parameters on the roughness of machined surfaces were investigated. Taguchi and ANOVA analysis were carried out. Graphs that are main effects and S/N ratios of factors were done. The experimental results have shown that main effects are feed rate (73.97%) and radius of edge (13.26%) for surface roughness. It was seen that cutting tools with smaller edge radius were wearer than others.
From Page
363
NaturalLanguageKeyword
Stainless steel , AISI 316Ti , turning , coated carbide cutting tools , surface roughness , Taguchi method , ANOVA.
JournalTitle
Journal Of The Faculty Of Engineering and Architecture Of Gazi University
To Page
372
JournalTitle
Journal Of The Faculty Of Engineering and Architecture Of Gazi University
Link To Document