Author/Authors
ALKAN, Zehra Süleyman Demirel Üniversitesi - Keçiborlu MYO - Makine ve Metal Teknikerliği Bölümü, Turkey , VAROL, Remzi Süleyman Demirel Üniversitesi - Mühendislik Fakültesi - Makina Mühendisliği Bölümü, Turkey , SELVER, Ramazan Süleyman Demirel Üniversitesi - Mühendislik Fakültesi - Makina Mühendisliği Bölümü, Turkey
Title Of Article
Metallographic Examination of Shot‐ Peened AA1050 Aluminium Material
شماره ركورد
25545
Abstract
In this study, metallographic investigation was carried out on shot peened AA1050 aluminium material. S230, S330 and S460 steel shots were selected and used for shot peening process. Shot peening was applied prepared samples. Heat treatment was made prior to shot peening process. As a result of metallographic examination, changes were observed in the micro structure and surface quality due to plastic deformation of the AA1050 material. Increasing the shot diameter, an increase in layer thickness deformed in shot peened surface was observed. In AA1050 material, as a result of shot peening process, a damage at some areas of severe plastic deformation surfaces was determined.
From Page
524
NaturalLanguageKeyword
AA1050 aluminium material , Shot peening , Metallographic examination
JournalTitle
Journal Of Natural and Applied Sciences
To Page
529
JournalTitle
Journal Of Natural and Applied Sciences
Link To Document