Author/Authors
YILMAZ, Volkan Gazi Üniversitesi - Teknoloji Fakültesi - İmalat Mühendisliği Böl, Turkey , DİLİPAK, Hakan Gazi Üniversitesi - Teknoloji Fakültesi - İmalat Mühendisliği Böl, Turkey , SARIKAYA, Murat Sinop Üniversitesi - Meslek yüksek Okulunda - Makine ve Metal Teknolojileri Bölümü, Turkey , YILMAZ, Ceren Yaman Gazi Üniversitesi - Atatürk Meslek Yüksekokulu - Makine ve Metal Teknolojileri Böl, Turkey , ÖZDEMİR, Mustafa Bozok Üni. - Meslek Yüksekokulu - Makine ve Metal Tek Böl, Turkey
Title Of Article
The modeling of results of cutting force, vibration and surface roughness in milling operations
شماره ركورد
28255
Abstract
In this study, parameters of cutting have researched the effect on cutting force, vibration acceleration and surface roughness via multiple regression analysis. The machining parameters have used 132, 220, 308 mm/min cutting speed, 0,05, 0,1, 0,15, 0,2 mm/tooth feed rate, 1, 1,5 mm cutting depth and 1, 2, 4 the number of cutting edge in experimental. With these parameters, chips have removed on AISI 1050 material experimental at 100x50x20 sized. Experimental results of the parameters that affect the rates of multiple regression analysis using Minitab 15.0 software ANOVA (Analysis of Variance) tables were formed. In addition to, intermediate values for the calculation of the values and expected results were obtained in three separate mathematical formulas developed.
From Page
220
NaturalLanguageKeyword
Milling , cutting force , vibration , surface quality , modeling
JournalTitle
Erciyes University Journal Of The Institute Of Science and Technology
To Page
226
JournalTitle
Erciyes University Journal Of The Institute Of Science and Technology
Link To Document