Author/Authors
YILMAZ, Volkan Gazi Üniversitesi - Teknik Eğitim Fakültesi - Makine Eğitimi Bölümü, Turkey , DİLİPAK, Hakan Gazi Üniversitesi - Teknoloji Fakültesi - İmalat Mühendisliği Bölümü, Turkey , SARIKAYA, Murat Sinop Üniversitesi - Meslek yüksek Okulunda - Makine ve Metal Teknolojileri Bölümü, Turkey , YILMAZ, Ceren Yaman Gazi Üniversitesi - Atatürk Meslek Yüksekokulu(Atatürk MYO) - Makine ve Metal Teknolojileri Bölümü, Turkey , MERAL, Güven Gazi Üniversitesi - Ostim Meslek Yüksekokulu, Turkey
Title Of Article
Optimization of Parameters Affecting the Vibration and Surface Roughness in Milling Operations
شماره ركورد
41282
Abstract
In this study, the effects have researched cutting of parameters on accelerations levels of vibration and surface quality and parameters of optimum machining have been determined. Technique of Taguchi design have used in experimental and 132, 220, 308 mm/min cutting speed, 0,05, 0,1, 0,2 mm/tooth feed rate, 1, 1,5 mm cutting depth and 1, 2, 4 the number of cutting edge have been determined as control factors. Taguchi L18 (2¹x3³) orthogonal array have chosen in accordance with machining parameters in experimental. Minitab 15 software with the help of evaluate the results of the experimental signal / noise (S / N) ratios have based and control the factors have been determined that the optimum level of vibration acceleration and the values of surface roughness have obtained. Influence of control factors has found with the help analysis of variance (ANOVA) on surface of quality. Results, levels of vibration and surface roughness have determined the most affected the value of feed.
From Page
37
NaturalLanguageKeyword
Milling , vibration , surface roughness , optimization
JournalTitle
Sdu Journal Of Technical Sciences
To Page
44
JournalTitle
Sdu Journal Of Technical Sciences
Link To Document