DocumentCode
1085652
Title
Design, fabrication and testing of a 56 mm bore twin-aperture 1 m long dipole magnet made with SSC type cable
Author
Ostler, J. ; Perini, D. ; Russenschuck, S. ; Siegel, N. ; Siemko, A. ; Trinquart, G. ; Walckiers, L. ; Weterings, W.
Author_Institution
CERN, Geneva, Switzerland
Volume
32
Issue
4
fYear
1996
fDate
7/1/1996 12:00:00 AM
Firstpage
2093
Lastpage
2096
Abstract
In the framework of the LHC superconducting dipole magnet model programme, a 56 mm bore, twin-aperture dipole model 1 m long, using existing cables of the standard SSC type, was launched to initiate studies of lower field magnets with smaller strand size cables for a 7 TeV collider. This model was designed, built, assembled and tested at CERN and reached a peak field of 9.7 T at 1.8 K. The paper reviews the main design principles, presents the fabrication and assembly procedures and finally discusses the overall test results
Keywords
accelerator magnets; proton accelerators; storage rings; superconducting magnets; synchrotrons; testing; 1 m; 1.8 K; 56 mm; 7 TeV; 9.7 T; LHC; assembly procedures; design; fabrication; superconducting dipole magnet; twin-aperture; Apertures; Assembly; Boring; Coils; Fabrication; Large Hadron Collider; Magnetic separation; Superconducting cables; Superconducting magnets; Testing;
fLanguage
English
Journal_Title
Magnetics, IEEE Transactions on
Publisher
ieee
ISSN
0018-9464
Type
jour
DOI
10.1109/20.508575
Filename
508575
Link To Document