DocumentCode :
1128725
Title :
High Rejection Ratio Tilted-Mirror Interferometer
Author :
Miron, Nicolae
Author_Institution :
Roctest Ltd., St. Lambert, QC
Volume :
26
Issue :
10
fYear :
2008
fDate :
5/15/2008 12:00:00 AM
Firstpage :
1323
Lastpage :
1329
Abstract :
This paper covers the tilted-mirror interferometer, which is an improvement of the similar configuration with parallel mirrors in several important parameters, such as: rejection ratio increase from 26 to 45 dB, the slopes of the transmission peaks increases from 4 to 40 dB/nm, and decreases several times the bandwidth at 3 dB. All the other parameters of nonmodulated light, such as 240-nm tuning range, tuning speed of 2 s/nm, tuning accuracy of 1 pm, 1-dB insertion loss, 0.2-dB flatness, 0.15-dB polarization-dependent loss are the same as in the configuration with parallel mirrors. The experiments have shown that the version with tilted mirrors has 80-nm/m tuning sensitivity to the gap change, slightly better than the configuration with the parallel mirrors.
Keywords :
band-pass filters; light interferometers; mirrors; optical filters; insertion loss flatness; tilted mirror interferometer; tunable bandpass optical filters; tuning sensitivity; Optical filters; nonresonant interferometer; tilted-mirror interferometer; tunable filters;
fLanguage :
English
Journal_Title :
Lightwave Technology, Journal of
Publisher :
ieee
ISSN :
0733-8724
Type :
jour
DOI :
10.1109/JLT.2008.917822
Filename :
4488210
Link To Document :
بازگشت