DocumentCode :
1131781
Title :
All-Fiber {Q} -Switched Ring Laser With Increased Repetition Rate
Author :
Cheng, X.P. ; Shum, P. ; Tse, C.H. ; Wu, R.F. ; Tan, W.C. ; Tang, M. ; Zhang, J.
Author_Institution :
Nanyang Technol. Univ., Singapore
Volume :
20
Issue :
10
fYear :
2008
fDate :
5/15/2008 12:00:00 AM
Firstpage :
764
Lastpage :
766
Abstract :
We demonstrate a novel approach to increase the Q-switching repetition rate of the fiber ring laser. This Q-switched fiber laser integrates an apodized fiber-Bragg-grating (FBG) reflector and a Fabry-Perot (FP) etalon constructed from cascaded chirped FBGs into the cavity. The apodized FBG reflector acts as wavelength discriminative component for oscillation, while the FP etalon is tuned periodically using the piezoelectric transducer (PZT) and functions as a Q-switching component. By adjusting the tuning range of the FP etalon, we obtain 3.5-, 7-, and 14-kHz Q-switched pulses train with constant PZT modulation frequency of 3.5 kHz.
Keywords :
Bragg gratings; Fabry-Perot interferometers; Q-switching; fibre lasers; piezoelectric transducers; Fabry-Perot etalon; Q-switching repetition rate; fiber ring laser; fiber-Bragg-grating reflector; frequency 3.5 kHz; piezoelectric transducers; Bragg gratings; Erbium-doped fiber lasers; Fiber gratings; Fiber lasers; Frequency modulation; Laser tuning; Optical fiber testing; Piezoelectric transducers; Pulse modulation; Ring lasers; ${Q}$ -switched lasers; Fabry–PÉrot (FP) resonators; piezoelectric transducers (PZT);
fLanguage :
English
Journal_Title :
Photonics Technology Letters, IEEE
Publisher :
ieee
ISSN :
1041-1135
Type :
jour
DOI :
10.1109/LPT.2008.921091
Filename :
4490018
Link To Document :
بازگشت