Design, fabrication and analytical investigations on a permanent magnet synchronous generator

Author

Nanda, Subhrakanti ; Sengupta, Mainak

Author_Institution

Dept. of E.E., Indian Inst. of Eng. Sci. & Technol., Howrah, India

fYear

2014

fDate

16-19 Dec. 2014

Firstpage

1

Lastpage

4

Abstract

This paper presents steps and procedure for the design of a 3-phase, 6 pole, 245V, 2kVA, surface mounted permanent magnet synchronous generator (PMSG). First the design and the performance analysis of the machine has been done by hand calculations. The results are then fine tuned and verified using a standard Finite Element Method package. Parameters of the machine have also been calculated. Static rotor shaft deflection and critical speed of the rotor have been calculated. The PMSG has been fabricated locally and is presently being tested.

Keywords

design engineering; finite element analysis; permanent magnet generators; rotors; shafts; surface mount technology; synchronous generators; PMSG; apparent power 2 kVA; critical rotor speed; finite element method package; performance analysis; static rotor shaft deflection; surface mounted permanent magnet synchronous generator; voltage 245 V; Finite element analysis; Generators; Magnetic levitation; Permanent magnets; Rotors; Shafts; Stators; Finite element method analysis; Permanent magnet synchronous generator; permanent magnet field design;

fLanguage

English

Publisher

ieee

Conference_Titel

Power Electronics, Drives and Energy Systems (PEDES), 2014 IEEE International Conference on

Conference_Location

Mumbai

Print_ISBN

978-1-4799-6372-0

Type

conf

DOI

10.1109/PEDES.2014.7042055

Filename

7042055