Fault tolerant flight control: from theory to piloted flight simulator experiments

Loss of control accounts for over 25% of aircraft accidents worldwide. This study presents a fault tolerant flight control strategy for increasing aircraft safety. The work has been undertaken within the Action Group on fault tolerant control (FTC) of the European GARTEUR programme, which develops collaborative efforts in Europe to create new FTC technologies that could significantly advance the goals of the aviation safety. After the fault detection and confirmation by the in-flight dedicated systems, a compensation loop is activated to ensure safe recovery. The design of the FTC loop is achieved without any changes in the nominal (and certificated) flight control system (FCS). The FTC scheme design is formulated as an H_∞ strong stabilisation problem. Fault compensability is subsequently discussed and formulated as a trim-deficiency analysis problem. The proposed technique is implemented on the SIMONA flight simulator and evaluated through a pilot experiment. The tested scenario corresponds to the landing approach of a large transport aircraft (B747-100/200). The faulty situation is related to trimmable horizontal stabiliser (THS) failures. Piloted flight simulator experiments show that fault tolerance can be achieved under the condition that there exists sufficient remaining control authority.