A new multi level inverter topology for grid interconnection of PV systems

Renewable energy sources (RES) gain an importance in recent decades because they are pollution free, easily erectable, and limitless. Among RES, Photovoltaic systems are mostly used as they are light, clean and easily installable. Normally PV cells converts sunlight into electricity in the form of dc. A suitable converter is usually needed to convert the dc power into ac power, which is then injecting into the power grid. The Multilevel Inverters [MLI] can be used to convert the dc into ac for integration of renewable energy sources into the conventional grids. But the conventional MLIs such as Diode Clamped MLIs requires extra diodes in conjunction with the active switches, Flying capacitor MLIs requires extra Capacitors and control also difficult if the levels increases and the Cascaded H-bridge MLIs requires separate dc sources which limits its use. This paper proposes a new type of multi level Inverter which converts the dc into ac using less number of switches when compared to conventional multilevel Inverters. The proposed Inverter can be used to integrate the Photovoltaic system into Grid, with satisfying the grid requirements such as phase angle, frequency and amplitude of the Grid voltage. Seven level and thirteen level proposed MLI is simulated using Matlab/Simulink environment and the corresponding results are presented in this paper.