Title :
Mechanical and electrical contact properties of wedge-connectors
Author :
Schindler, John J. ; Axon, R.T. ; Timsi, Roland S.
Author_Institution :
AMP of Canada Ltd., Markham, Ont., Canada
fDate :
9/1/1996 12:00:00 AM
Abstract :
The paper describes the mechanical and electrical contact properties of a typical fired wedge-connector. The measured forces and displacements in the connector components are compared with the predictions of a finite element analysis (FEA) of a wedge-connector interfaced with solid aluminum conductors. The distribution of mechanical stresses resulting from typical applied mechanical loads are evaluated using a nonlinear FEA code. The nonlinear input data for the FEA calculations were obtained from mechanical testing of metal specimens obtained from connectors used in the investigation. Measurements of contact resistance of the electrical interfaces are also reported. The wipe-off of surface oxide films from the electrical interfaces during connector installation is described
Keywords :
contact resistance; electric connectors; electrical contacts; finite element analysis; mechanical contact; Al; contact resistance; electrical contact; electrical interface; finite element analysis; mechanical contact; nonlinear FEA code; solid aluminum conductor; stress distribution; surface oxide film; wedge connector; wipe-off; Aluminum; Conductors; Connectors; Contacts; Displacement measurement; Finite element methods; Force measurement; Mechanical factors; Solids; Stress;
Journal_Title :
Components, Packaging, and Manufacturing Technology, Part A, IEEE Transactions on
