Title :
High voltage generation with a high T/sub c/ superconducting resonant circuit
Author :
Jin, J.X. ; Dou, S.X. ; Liu, H.K. ; Grantham, C.
Author_Institution :
Centre for Supercond. & Electron. Mater., Wollongong Univ., NSW, Australia
fDate :
6/1/1997 12:00:00 AM
Abstract :
An electronic resonant circuit is introduced with the consideration of using an inductor made by a Ag-clad (Bi,Pb)/sub 2/Sr/sub 2/Ca/sub 2/Cu/sub 3/O/sub 10+x/, HTS wire. With this inductor, substantially higher voltages compared with using normal copper winding inductor can be built up by the circuit. Therefore this method can be used to generate high voltages with the HTS inductor from a low voltage source. An electronic controller has been built and used for the testing, and the resonant circuit, using the HTS inductor, is analyzed.
Keywords :
bismuth compounds; calcium compounds; critical current density (superconductivity); high-temperature superconductors; inductors; lead compounds; strontium compounds; superconducting coils; superconducting resonators; (BiPb)/sub 2/Sr/sub 2/Ca/sub 2/Cu/sub 3/O/sub 10+x/; HTS wire; critical current; high T/sub c/ superconducting resonant circuit; high voltage generation; inductor; low voltage source; superconducting coils; Capacitors; Circuit testing; High temperature superconductors; Inductors; Power supplies; RLC circuits; Resonance; Switches; Voltage; Wire;
Journal_Title :
Applied Superconductivity, IEEE Transactions on
