Title :
Modeling and control of a tapped-inductor buck converter with pulse frequency modulation
Author :
Bessegato, Luca ; Modeer, Tomas ; Norrga, Staffan
Author_Institution :
Dept. Electr. Energy Conversion, R. Inst. of Technol., Stockholm, Sweden
Abstract :
The tapped-inductor buck (TI-buck) converter has shown to be a suitable solution for auxiliary power supply for modular multilevel converter submodules. Such application features a large step-down voltage conversion, made at relatively low output power. This converter operates in discontinuous conduction mode with zero voltage switching of the high-voltage valve. This paper treats the dynamic behaviour of the aforementioned converter. First, an average output current model of the converter is developed and a small signal model is obtained. Then, a closed-loop output voltage control, which uses the switching frequency as control variable, is designed and implemented using a microcontroller. Measurements on a down-scaled prototype shows that the control system provides a well-controlled average output voltage, which is stable under significant load variation. Finally, a solution for implementing the start-up of the converter is presented and tested.
Keywords :
power convertors; power inductors; pulse frequency modulation; auxiliary power supply; closed-loop output voltage control; modular multilevel converter submodules; pulse frequency modulation; tapped-inductor buck converter; Gain; Load modeling; Logic gates; Mathematical model; Prototypes; Switches; Voltage control;
Conference_Titel :
Energy Conversion Congress and Exposition (ECCE), 2014 IEEE
Conference_Location :
Pittsburgh, PA
DOI :
10.1109/ECCE.2014.6953900