Development of the drive system for a four-phase switched reluctance motors

Author

Rdtuad, Paiwan Ke ; Ttiratsatcha, Supat Ki

Author_Institution

Department of Electrical Engineering, Faculty of Engineering, King Mongkut´s Institute of Technology Ladkrabang, KMITL Chalongkrung Road, Ladkrabang, Thailand

fYear

2014

fDate

14-17 May 2014

Firstpage

1

Lastpage

4

Abstract

This paper presents the development of the drive system for a four-phase Switched Reluctance Motor (SRM). The drive system are consists of the experimental and the software control scheme. The experimental system is designed for a four-phase 8/6 3Hp SRM. The control scheme are consists of the speed control and the two-quadrant control. The speed control scheme is used PI controller to calculate reference value of the phase current, the phase current can control in both soft chopping and hard chopping modes. The two-quadrant control scheme is used an analog switch to control the operation modes from motoring to generating (braking). The control schemes are implemented on the TMS320F2812 DSP which is a main controller. The SRM drive system that obtained from this research will be used in the future works.

Keywords

Digital signal processing; Switched reluctance motors; Switches; Torque; Asymmetrical Converter; Digital Signal Processing (DSP); Hard Chopping Mode; Single Pulse Mode; Soft Chopping Mode; Switched-Reluctance Motor (SRM);

fLanguage

English

Publisher

ieee

Conference_Titel

Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), 2014 11th International Conference on

Conference_Location

Nakhon Ratchasima, Thailand

Type

conf

DOI

10.1109/ECTICon.2014.6839878

Filename

6839878