DocumentCode
1894879
Title
A simple approach for synthesizing of multipurpose metamaterials
Author
Kabiri, A. ; Ramahi, O.M.
Author_Institution
Univ. of Waterloo, Waterloo, ON, Canada
fYear
2010
fDate
11-17 July 2010
Firstpage
1
Lastpage
4
Abstract
Based on an analytical model proposed in our early work, a design approach for synthesizing AMMs with desired properties has been proposed. The proposed approach provides an iterative steps to calculate the area and the perimeter of the inclusions for requested medium. As the iterations proceed, the smaller range of possible area and perimeter is obtained. Finally, the calculated range of parameters suggests an AMM with a desirable level of accuracy in the magnetic response of the medium. Any geometrical shape that meets the calculated area and perimeter would be a proper candidate for inclusions. Numerical simulation also validated the results.
Keywords
geometry; iterative methods; metamaterials; AMM; artificial magnetic materials; design approach; geometrical shape; iterative steps; magnetic response; multipurpose metamaterial synthesis; numerical simulation; Bandwidth; Fabrication; Magnetic materials; Magnetic resonance; Permeability;
fLanguage
English
Publisher
ieee
Conference_Titel
Antennas and Propagation Society International Symposium (APSURSI), 2010 IEEE
Conference_Location
Toronto, ON
ISSN
1522-3965
Print_ISBN
978-1-4244-4967-5
Type
conf
DOI
10.1109/APS.2010.5561953
Filename
5561953
Link To Document