DocumentCode :
191270
Title :
Design and Realization of 3 dB hybrid stripline coupler in 0.5 – 18.0 GHz
Author :
Anselmi, Mauro ; Pingue, Massimiliano ; Manna, Antonio ; Flamini, Roberto ; Cosmi, Luigi
Author_Institution :
Microwaves & Antennas Dept. - Hardware Dev., Elettron. S.p.A., Rome, Italy
fYear :
2014
fDate :
6-9 Oct. 2014
Firstpage :
464
Lastpage :
467
Abstract :
In this article the design and the construction of an ultrawideband (UWB) 3 dB hybrid coupler are presented. The coupler is realized in broadside stripline technology to cover the operating bandwidth 0.5 - 18 GHz (more than five octaves). Detailed electromagnetic design has been carried to optimize performances according to bandwidth. The comparison between simulations and measurements validated the design approach. The first prototype guaranteed an insertion loss lower than 5 dB and a phase shift equal to 90° +/- 5° in bandwidth
Keywords :
losses; optimisation; phase shifters; strip line couplers; ultra wideband technology; bandwidth 0.5 GHz to 18 GHz; broadside stripline technology; electromagnetic design; hybrid stripline coupler design; insertion loss; operating bandwidth; performances optimization; phase shift; ultrawideband hybrid coupler construction; Bandwidth; Couplers; Couplings; IEEE Transactions on Microwave Theory and Techniques; Microwave circuits; Stripline; hybrid coupler; multisections couplers; stripline;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Microwave Conference (EuMC), 2014 44th European
Conference_Location :
Rome
Type :
conf
DOI :
10.1109/EuMC.2014.6986471
Filename :
6986471
Link To Document :
بازگشت