Design and implementation of an inertial navigation system for pedestrians based on a low-cost MEMS IMU

Inertial navigation systems for pedestrians are infrastructure-less and can achieve sub-meter accuracy in the short/medium period. However, when low-cost inertial measurement units (IMU) are employed for their implementation, they suffer from a slowly growing drift between the true pedestrian position and the corresponding estimated position. In this paper we illustrate a novel solution to mitigate such a drift by: a) using only accelerometer and gyroscope measurements (no magnetometers required); b) including the sensor error model parameters in the state vector of an extended Kalman filter; c) adopting a novel soft heuristic for foot stance detection and for zero-velocity updates. Experimental results evidence that our inertial-only navigation system can achieve similar or better performance with respect to pedestrian dead-reckoning systems presented in related studies, although the adopted IMU is less accurate than more expensive counterparts.